| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * cobalt driver initialization and card probing |
| * |
| * Derived from cx18-driver.c |
| * |
| * Copyright 2012-2015 Cisco Systems, Inc. and/or its affiliates. |
| * All rights reserved. |
| */ |
| |
| #include <linux/delay.h> |
| #include <media/i2c/adv7604.h> |
| #include <media/i2c/adv7842.h> |
| #include <media/i2c/adv7511.h> |
| #include <media/v4l2-event.h> |
| #include <media/v4l2-ctrls.h> |
| |
| #include "cobalt-driver.h" |
| #include "cobalt-irq.h" |
| #include "cobalt-i2c.h" |
| #include "cobalt-v4l2.h" |
| #include "cobalt-flash.h" |
| #include "cobalt-alsa.h" |
| #include "cobalt-omnitek.h" |
| |
| /* add your revision and whatnot here */ |
| static const struct pci_device_id cobalt_pci_tbl[] = { |
| {PCI_VENDOR_ID_CISCO, PCI_DEVICE_ID_COBALT, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, |
| {0,} |
| }; |
| |
| MODULE_DEVICE_TABLE(pci, cobalt_pci_tbl); |
| |
| static atomic_t cobalt_instance = ATOMIC_INIT(0); |
| |
| int cobalt_debug; |
| module_param_named(debug, cobalt_debug, int, 0644); |
| MODULE_PARM_DESC(debug, "Debug level. Default: 0\n"); |
| |
| int cobalt_ignore_err; |
| module_param_named(ignore_err, cobalt_ignore_err, int, 0644); |
| MODULE_PARM_DESC(ignore_err, |
| "If set then ignore missing i2c adapters/receivers. Default: 0\n"); |
| |
| MODULE_AUTHOR("Hans Verkuil <hans.verkuil@cisco.com> & Morten Hestnes"); |
| MODULE_DESCRIPTION("cobalt driver"); |
| MODULE_LICENSE("GPL"); |
| |
| static u8 edid[256] = { |
| 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00, |
| 0x50, 0x21, 0x32, 0x27, 0x00, 0x00, 0x00, 0x00, |
| 0x22, 0x1a, 0x01, 0x03, 0x80, 0x30, 0x1b, 0x78, |
| 0x0f, 0xee, 0x91, 0xa3, 0x54, 0x4c, 0x99, 0x26, |
| 0x0f, 0x50, 0x54, 0x2f, 0xcf, 0x00, 0x31, 0x59, |
| 0x45, 0x59, 0x61, 0x59, 0x81, 0x99, 0x01, 0x01, |
| 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x02, 0x3a, |
| 0x80, 0x18, 0x71, 0x38, 0x2d, 0x40, 0x58, 0x2c, |
| 0x46, 0x00, 0xe0, 0x0e, 0x11, 0x00, 0x00, 0x1e, |
| 0x00, 0x00, 0x00, 0xfd, 0x00, 0x18, 0x55, 0x18, |
| 0x5e, 0x11, 0x00, 0x0a, 0x20, 0x20, 0x20, 0x20, |
| 0x20, 0x20, 0x00, 0x00, 0x00, 0xfc, 0x00, 0x63, |
| 0x6f, 0x62, 0x61, 0x6c, 0x74, 0x0a, 0x20, 0x20, |
| 0x20, 0x20, 0x20, 0x20, 0x00, 0x00, 0x00, 0x10, |
| 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x9c, |
| |
| 0x02, 0x03, 0x1f, 0xf0, 0x4a, 0x90, 0x1f, 0x04, |
| 0x13, 0x22, 0x21, 0x20, 0x02, 0x11, 0x01, 0x23, |
| 0x09, 0x07, 0x07, 0x68, 0x03, 0x0c, 0x00, 0x10, |
| 0x00, 0x00, 0x22, 0x0f, 0xe2, 0x00, 0xea, 0x00, |
| 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xa7, |
| }; |
| |
| static void cobalt_set_interrupt(struct cobalt *cobalt, bool enable) |
| { |
| if (enable) { |
| unsigned irqs = COBALT_SYSSTAT_VI0_INT1_MSK | |
| COBALT_SYSSTAT_VI1_INT1_MSK | |
| COBALT_SYSSTAT_VI2_INT1_MSK | |
| COBALT_SYSSTAT_VI3_INT1_MSK | |
| COBALT_SYSSTAT_VI0_INT2_MSK | |
| COBALT_SYSSTAT_VI1_INT2_MSK | |
| COBALT_SYSSTAT_VI2_INT2_MSK | |
| COBALT_SYSSTAT_VI3_INT2_MSK | |
| COBALT_SYSSTAT_VI0_LOST_DATA_MSK | |
| COBALT_SYSSTAT_VI1_LOST_DATA_MSK | |
| COBALT_SYSSTAT_VI2_LOST_DATA_MSK | |
| COBALT_SYSSTAT_VI3_LOST_DATA_MSK | |
| COBALT_SYSSTAT_AUD_IN_LOST_DATA_MSK; |
| |
| if (cobalt->have_hsma_rx) |
| irqs |= COBALT_SYSSTAT_VIHSMA_INT1_MSK | |
| COBALT_SYSSTAT_VIHSMA_INT2_MSK | |
| COBALT_SYSSTAT_VIHSMA_LOST_DATA_MSK; |
| |
| if (cobalt->have_hsma_tx) |
| irqs |= COBALT_SYSSTAT_VOHSMA_INT1_MSK | |
| COBALT_SYSSTAT_VOHSMA_LOST_DATA_MSK | |
| COBALT_SYSSTAT_AUD_OUT_LOST_DATA_MSK; |
| /* Clear any existing interrupts */ |
| cobalt_write_bar1(cobalt, COBALT_SYS_STAT_EDGE, 0xffffffff); |
| /* PIO Core interrupt mask register. |
| Enable ADV7604 INT1 interrupts */ |
| cobalt_write_bar1(cobalt, COBALT_SYS_STAT_MASK, irqs); |
| } else { |
| /* Disable all ADV7604 interrupts */ |
| cobalt_write_bar1(cobalt, COBALT_SYS_STAT_MASK, 0); |
| } |
| } |
| |
| static unsigned cobalt_get_sd_nr(struct v4l2_subdev *sd) |
| { |
| struct cobalt *cobalt = to_cobalt(sd->v4l2_dev); |
| unsigned i; |
| |
| for (i = 0; i < COBALT_NUM_NODES; i++) |
| if (sd == cobalt->streams[i].sd) |
| return i; |
| cobalt_err("Invalid adv7604 subdev pointer!\n"); |
| return 0; |
| } |
| |
| static void cobalt_notify(struct v4l2_subdev *sd, |
| unsigned int notification, void *arg) |
| { |
| struct cobalt *cobalt = to_cobalt(sd->v4l2_dev); |
| unsigned sd_nr = cobalt_get_sd_nr(sd); |
| struct cobalt_stream *s = &cobalt->streams[sd_nr]; |
| bool hotplug = arg ? *((int *)arg) : false; |
| |
| if (s->is_output) |
| return; |
| |
| switch (notification) { |
| case ADV76XX_HOTPLUG: |
| cobalt_s_bit_sysctrl(cobalt, |
| COBALT_SYS_CTRL_HPD_TO_CONNECTOR_BIT(sd_nr), hotplug); |
| cobalt_dbg(1, "Set hotplug for adv %d to %d\n", sd_nr, hotplug); |
| break; |
| case V4L2_DEVICE_NOTIFY_EVENT: |
| cobalt_dbg(1, "Format changed for adv %d\n", sd_nr); |
| v4l2_event_queue(&s->vdev, arg); |
| break; |
| default: |
| break; |
| } |
| } |
| |
| static int get_payload_size(u16 code) |
| { |
| switch (code) { |
| case 0: return 128; |
| case 1: return 256; |
| case 2: return 512; |
| case 3: return 1024; |
| case 4: return 2048; |
| case 5: return 4096; |
| default: return 0; |
| } |
| return 0; |
| } |
| |
| static const char *get_link_speed(u16 stat) |
| { |
| switch (stat & PCI_EXP_LNKSTA_CLS) { |
| case 1: return "2.5 Gbit/s"; |
| case 2: return "5 Gbit/s"; |
| case 3: return "10 Gbit/s"; |
| } |
| return "Unknown speed"; |
| } |
| |
| void cobalt_pcie_status_show(struct cobalt *cobalt) |
| { |
| struct pci_dev *pci_dev = cobalt->pci_dev; |
| struct pci_dev *pci_bus_dev = cobalt->pci_dev->bus->self; |
| u32 capa; |
| u16 stat, ctrl; |
| |
| if (!pci_is_pcie(pci_dev) || !pci_is_pcie(pci_bus_dev)) |
| return; |
| |
| /* Device */ |
| pcie_capability_read_dword(pci_dev, PCI_EXP_DEVCAP, &capa); |
| pcie_capability_read_word(pci_dev, PCI_EXP_DEVCTL, &ctrl); |
| pcie_capability_read_word(pci_dev, PCI_EXP_DEVSTA, &stat); |
| cobalt_info("PCIe device capability 0x%08x: Max payload %d\n", |
| capa, get_payload_size(capa & PCI_EXP_DEVCAP_PAYLOAD)); |
| cobalt_info("PCIe device control 0x%04x: Max payload %d. Max read request %d\n", |
| ctrl, |
| get_payload_size((ctrl & PCI_EXP_DEVCTL_PAYLOAD) >> 5), |
| get_payload_size((ctrl & PCI_EXP_DEVCTL_READRQ) >> 12)); |
| cobalt_info("PCIe device status 0x%04x\n", stat); |
| |
| /* Link */ |
| pcie_capability_read_dword(pci_dev, PCI_EXP_LNKCAP, &capa); |
| pcie_capability_read_word(pci_dev, PCI_EXP_LNKCTL, &ctrl); |
| pcie_capability_read_word(pci_dev, PCI_EXP_LNKSTA, &stat); |
| cobalt_info("PCIe link capability 0x%08x: %s per lane and %u lanes\n", |
| capa, get_link_speed(capa), |
| (capa & PCI_EXP_LNKCAP_MLW) >> 4); |
| cobalt_info("PCIe link control 0x%04x\n", ctrl); |
| cobalt_info("PCIe link status 0x%04x: %s per lane and %u lanes\n", |
| stat, get_link_speed(stat), |
| (stat & PCI_EXP_LNKSTA_NLW) >> 4); |
| |
| /* Bus */ |
| pcie_capability_read_dword(pci_bus_dev, PCI_EXP_LNKCAP, &capa); |
| cobalt_info("PCIe bus link capability 0x%08x: %s per lane and %u lanes\n", |
| capa, get_link_speed(capa), |
| (capa & PCI_EXP_LNKCAP_MLW) >> 4); |
| |
| /* Slot */ |
| pcie_capability_read_dword(pci_dev, PCI_EXP_SLTCAP, &capa); |
| pcie_capability_read_word(pci_dev, PCI_EXP_SLTCTL, &ctrl); |
| pcie_capability_read_word(pci_dev, PCI_EXP_SLTSTA, &stat); |
| cobalt_info("PCIe slot capability 0x%08x\n", capa); |
| cobalt_info("PCIe slot control 0x%04x\n", ctrl); |
| cobalt_info("PCIe slot status 0x%04x\n", stat); |
| } |
| |
| static unsigned pcie_link_get_lanes(struct cobalt *cobalt) |
| { |
| struct pci_dev *pci_dev = cobalt->pci_dev; |
| u16 link; |
| |
| if (!pci_is_pcie(pci_dev)) |
| return 0; |
| pcie_capability_read_word(pci_dev, PCI_EXP_LNKSTA, &link); |
| return (link & PCI_EXP_LNKSTA_NLW) >> 4; |
| } |
| |
| static unsigned pcie_bus_link_get_lanes(struct cobalt *cobalt) |
| { |
| struct pci_dev *pci_dev = cobalt->pci_dev->bus->self; |
| u32 link; |
| |
| if (!pci_is_pcie(pci_dev)) |
| return 0; |
| pcie_capability_read_dword(pci_dev, PCI_EXP_LNKCAP, &link); |
| return (link & PCI_EXP_LNKCAP_MLW) >> 4; |
| } |
| |
| static void msi_config_show(struct cobalt *cobalt, struct pci_dev *pci_dev) |
| { |
| u16 ctrl, data; |
| u32 adrs_l, adrs_h; |
| |
| pci_read_config_word(pci_dev, 0x52, &ctrl); |
| cobalt_info("MSI %s\n", ctrl & 1 ? "enable" : "disable"); |
| cobalt_info("MSI multiple message: Capable %u. Enable %u\n", |
| (1 << ((ctrl >> 1) & 7)), (1 << ((ctrl >> 4) & 7))); |
| if (ctrl & 0x80) |
| cobalt_info("MSI: 64-bit address capable\n"); |
| pci_read_config_dword(pci_dev, 0x54, &adrs_l); |
| pci_read_config_dword(pci_dev, 0x58, &adrs_h); |
| pci_read_config_word(pci_dev, 0x5c, &data); |
| if (ctrl & 0x80) |
| cobalt_info("MSI: Address 0x%08x%08x. Data 0x%04x\n", |
| adrs_h, adrs_l, data); |
| else |
| cobalt_info("MSI: Address 0x%08x. Data 0x%04x\n", |
| adrs_l, data); |
| } |
| |
| static void cobalt_pci_iounmap(struct cobalt *cobalt, struct pci_dev *pci_dev) |
| { |
| if (cobalt->bar0) { |
| pci_iounmap(pci_dev, cobalt->bar0); |
| cobalt->bar0 = NULL; |
| } |
| if (cobalt->bar1) { |
| pci_iounmap(pci_dev, cobalt->bar1); |
| cobalt->bar1 = NULL; |
| } |
| } |
| |
| static void cobalt_free_msi(struct cobalt *cobalt, struct pci_dev *pci_dev) |
| { |
| free_irq(pci_dev->irq, (void *)cobalt); |
| pci_free_irq_vectors(pci_dev); |
| } |
| |
| static int cobalt_setup_pci(struct cobalt *cobalt, struct pci_dev *pci_dev, |
| const struct pci_device_id *pci_id) |
| { |
| u32 ctrl; |
| int ret; |
| |
| cobalt_dbg(1, "enabling pci device\n"); |
| |
| ret = pci_enable_device(pci_dev); |
| if (ret) { |
| cobalt_err("can't enable device\n"); |
| return ret; |
| } |
| pci_set_master(pci_dev); |
| pci_read_config_byte(pci_dev, PCI_CLASS_REVISION, &cobalt->card_rev); |
| pci_read_config_word(pci_dev, PCI_DEVICE_ID, &cobalt->device_id); |
| |
| switch (cobalt->device_id) { |
| case PCI_DEVICE_ID_COBALT: |
| cobalt_info("PCI Express interface from Omnitek\n"); |
| break; |
| default: |
| cobalt_info("PCI Express interface provider is unknown!\n"); |
| break; |
| } |
| |
| if (pcie_link_get_lanes(cobalt) != 8) { |
| cobalt_warn("PCI Express link width is %d lanes.\n", |
| pcie_link_get_lanes(cobalt)); |
| if (pcie_bus_link_get_lanes(cobalt) < 8) |
| cobalt_warn("The current slot only supports %d lanes, for best performance 8 are needed\n", |
| pcie_bus_link_get_lanes(cobalt)); |
| if (pcie_link_get_lanes(cobalt) != pcie_bus_link_get_lanes(cobalt)) { |
| cobalt_err("The card is most likely not seated correctly in the PCIe slot\n"); |
| ret = -EIO; |
| goto err_disable; |
| } |
| } |
| |
| if (pci_set_dma_mask(pci_dev, DMA_BIT_MASK(64))) { |
| ret = pci_set_dma_mask(pci_dev, DMA_BIT_MASK(32)); |
| if (ret) { |
| cobalt_err("no suitable DMA available\n"); |
| goto err_disable; |
| } |
| } |
| |
| ret = pci_request_regions(pci_dev, "cobalt"); |
| if (ret) { |
| cobalt_err("error requesting regions\n"); |
| goto err_disable; |
| } |
| |
| cobalt_pcie_status_show(cobalt); |
| |
| cobalt->bar0 = pci_iomap(pci_dev, 0, 0); |
| cobalt->bar1 = pci_iomap(pci_dev, 1, 0); |
| if (cobalt->bar1 == NULL) { |
| cobalt->bar1 = pci_iomap(pci_dev, 2, 0); |
| cobalt_info("64-bit BAR\n"); |
| } |
| if (!cobalt->bar0 || !cobalt->bar1) { |
| ret = -EIO; |
| goto err_release; |
| } |
| |
| /* Reset the video inputs before enabling any interrupts */ |
| ctrl = cobalt_read_bar1(cobalt, COBALT_SYS_CTRL_BASE); |
| cobalt_write_bar1(cobalt, COBALT_SYS_CTRL_BASE, ctrl & ~0xf00); |
| |
| /* Disable interrupts to prevent any spurious interrupts |
| from being generated. */ |
| cobalt_set_interrupt(cobalt, false); |
| |
| if (pci_alloc_irq_vectors(pci_dev, 1, 1, PCI_IRQ_MSI) < 1) { |
| cobalt_err("Could not enable MSI\n"); |
| ret = -EIO; |
| goto err_release; |
| } |
| msi_config_show(cobalt, pci_dev); |
| |
| /* Register IRQ */ |
| if (request_irq(pci_dev->irq, cobalt_irq_handler, IRQF_SHARED, |
| cobalt->v4l2_dev.name, (void *)cobalt)) { |
| cobalt_err("Failed to register irq %d\n", pci_dev->irq); |
| ret = -EIO; |
| goto err_msi; |
| } |
| |
| omni_sg_dma_init(cobalt); |
| return 0; |
| |
| err_msi: |
| pci_disable_msi(pci_dev); |
| |
| err_release: |
| cobalt_pci_iounmap(cobalt, pci_dev); |
| pci_release_regions(pci_dev); |
| |
| err_disable: |
| pci_disable_device(cobalt->pci_dev); |
| return ret; |
| } |
| |
| static int cobalt_hdl_info_get(struct cobalt *cobalt) |
| { |
| int i; |
| |
| for (i = 0; i < COBALT_HDL_INFO_SIZE; i++) |
| cobalt->hdl_info[i] = |
| ioread8(cobalt->bar1 + COBALT_HDL_INFO_BASE + i); |
| cobalt->hdl_info[COBALT_HDL_INFO_SIZE - 1] = '\0'; |
| if (strstr(cobalt->hdl_info, COBALT_HDL_SEARCH_STR)) |
| return 0; |
| |
| return 1; |
| } |
| |
| static void cobalt_stream_struct_init(struct cobalt *cobalt) |
| { |
| int i; |
| |
| for (i = 0; i < COBALT_NUM_STREAMS; i++) { |
| struct cobalt_stream *s = &cobalt->streams[i]; |
| |
| s->cobalt = cobalt; |
| s->flags = 0; |
| s->is_audio = false; |
| s->is_output = false; |
| s->is_dummy = true; |
| |
| /* The Memory DMA channels will always get a lower channel |
| * number than the FIFO DMA. Video input should map to the |
| * stream 0-3. The other can use stream struct from 4 and |
| * higher */ |
| if (i <= COBALT_HSMA_IN_NODE) { |
| s->dma_channel = i + cobalt->first_fifo_channel; |
| s->video_channel = i; |
| s->dma_fifo_mask = |
| COBALT_SYSSTAT_VI0_LOST_DATA_MSK << (4 * i); |
| s->adv_irq_mask = |
| COBALT_SYSSTAT_VI0_INT1_MSK << (4 * i); |
| } else if (i >= COBALT_AUDIO_IN_STREAM && |
| i <= COBALT_AUDIO_IN_STREAM + 4) { |
| unsigned idx = i - COBALT_AUDIO_IN_STREAM; |
| |
| s->dma_channel = 6 + idx; |
| s->is_audio = true; |
| s->video_channel = idx; |
| s->dma_fifo_mask = COBALT_SYSSTAT_AUD_IN_LOST_DATA_MSK; |
| } else if (i == COBALT_HSMA_OUT_NODE) { |
| s->dma_channel = 11; |
| s->is_output = true; |
| s->video_channel = 5; |
| s->dma_fifo_mask = COBALT_SYSSTAT_VOHSMA_LOST_DATA_MSK; |
| s->adv_irq_mask = COBALT_SYSSTAT_VOHSMA_INT1_MSK; |
| } else if (i == COBALT_AUDIO_OUT_STREAM) { |
| s->dma_channel = 12; |
| s->is_audio = true; |
| s->is_output = true; |
| s->video_channel = 5; |
| s->dma_fifo_mask = COBALT_SYSSTAT_AUD_OUT_LOST_DATA_MSK; |
| } else { |
| /* FIXME: Memory DMA for debug purpose */ |
| s->dma_channel = i - COBALT_NUM_NODES; |
| } |
| cobalt_info("stream #%d -> dma channel #%d <- video channel %d\n", |
| i, s->dma_channel, s->video_channel); |
| } |
| } |
| |
| static int cobalt_subdevs_init(struct cobalt *cobalt) |
| { |
| static struct adv76xx_platform_data adv7604_pdata = { |
| .disable_pwrdnb = 1, |
| .ain_sel = ADV7604_AIN7_8_9_NC_SYNC_3_1, |
| .bus_order = ADV7604_BUS_ORDER_BRG, |
| .blank_data = 1, |
| .op_format_mode_sel = ADV7604_OP_FORMAT_MODE0, |
| .int1_config = ADV76XX_INT1_CONFIG_ACTIVE_HIGH, |
| .dr_str_data = ADV76XX_DR_STR_HIGH, |
| .dr_str_clk = ADV76XX_DR_STR_HIGH, |
| .dr_str_sync = ADV76XX_DR_STR_HIGH, |
| .hdmi_free_run_mode = 1, |
| .inv_vs_pol = 1, |
| .inv_hs_pol = 1, |
| }; |
| static struct i2c_board_info adv7604_info = { |
| .type = "adv7604", |
| .addr = 0x20, |
| .platform_data = &adv7604_pdata, |
| }; |
| |
| struct cobalt_stream *s = cobalt->streams; |
| int i; |
| |
| for (i = 0; i < COBALT_NUM_INPUTS; i++) { |
| struct v4l2_subdev_format sd_fmt = { |
| .pad = ADV7604_PAD_SOURCE, |
| .which = V4L2_SUBDEV_FORMAT_ACTIVE, |
| .format.code = MEDIA_BUS_FMT_YUYV8_1X16, |
| }; |
| struct v4l2_subdev_edid cobalt_edid = { |
| .pad = ADV76XX_PAD_HDMI_PORT_A, |
| .start_block = 0, |
| .blocks = 2, |
| .edid = edid, |
| }; |
| int err; |
| |
| s[i].pad_source = ADV7604_PAD_SOURCE; |
| s[i].i2c_adap = &cobalt->i2c_adap[i]; |
| if (s[i].i2c_adap->dev.parent == NULL) |
| continue; |
| cobalt_s_bit_sysctrl(cobalt, |
| COBALT_SYS_CTRL_NRESET_TO_HDMI_BIT(i), 1); |
| s[i].sd = v4l2_i2c_new_subdev_board(&cobalt->v4l2_dev, |
| s[i].i2c_adap, &adv7604_info, NULL); |
| if (!s[i].sd) { |
| if (cobalt_ignore_err) |
| continue; |
| return -ENODEV; |
| } |
| err = v4l2_subdev_call(s[i].sd, video, s_routing, |
| ADV76XX_PAD_HDMI_PORT_A, 0, 0); |
| if (err) |
| return err; |
| err = v4l2_subdev_call(s[i].sd, pad, set_edid, |
| &cobalt_edid); |
| if (err) |
| return err; |
| err = v4l2_subdev_call(s[i].sd, pad, set_fmt, NULL, |
| &sd_fmt); |
| if (err) |
| return err; |
| /* Reset channel video module */ |
| cobalt_s_bit_sysctrl(cobalt, |
| COBALT_SYS_CTRL_VIDEO_RX_RESETN_BIT(i), 0); |
| mdelay(2); |
| cobalt_s_bit_sysctrl(cobalt, |
| COBALT_SYS_CTRL_VIDEO_RX_RESETN_BIT(i), 1); |
| mdelay(1); |
| s[i].is_dummy = false; |
| cobalt->streams[i + COBALT_AUDIO_IN_STREAM].is_dummy = false; |
| } |
| return 0; |
| } |
| |
| static int cobalt_subdevs_hsma_init(struct cobalt *cobalt) |
| { |
| static struct adv7842_platform_data adv7842_pdata = { |
| .disable_pwrdnb = 1, |
| .ain_sel = ADV7842_AIN1_2_3_NC_SYNC_1_2, |
| .bus_order = ADV7842_BUS_ORDER_RBG, |
| .op_format_mode_sel = ADV7842_OP_FORMAT_MODE0, |
| .blank_data = 1, |
| .dr_str_data = 3, |
| .dr_str_clk = 3, |
| .dr_str_sync = 3, |
| .mode = ADV7842_MODE_HDMI, |
| .hdmi_free_run_enable = 1, |
| .vid_std_select = ADV7842_HDMI_COMP_VID_STD_HD_1250P, |
| .i2c_sdp_io = 0x4a, |
| .i2c_sdp = 0x48, |
| .i2c_cp = 0x22, |
| .i2c_vdp = 0x24, |
| .i2c_afe = 0x26, |
| .i2c_hdmi = 0x34, |
| .i2c_repeater = 0x32, |
| .i2c_edid = 0x36, |
| .i2c_infoframe = 0x3e, |
| .i2c_cec = 0x40, |
| .i2c_avlink = 0x42, |
| }; |
| static struct i2c_board_info adv7842_info = { |
| .type = "adv7842", |
| .addr = 0x20, |
| .platform_data = &adv7842_pdata, |
| }; |
| static struct v4l2_subdev_format sd_fmt = { |
| .pad = ADV7842_PAD_SOURCE, |
| .which = V4L2_SUBDEV_FORMAT_ACTIVE, |
| .format.code = MEDIA_BUS_FMT_YUYV8_1X16, |
| }; |
| static struct adv7511_platform_data adv7511_pdata = { |
| .i2c_edid = 0x7e >> 1, |
| .i2c_cec = 0x7c >> 1, |
| .i2c_pktmem = 0x70 >> 1, |
| .cec_clk = 12000000, |
| }; |
| static struct i2c_board_info adv7511_info = { |
| .type = "adv7511-v4l2", |
| .addr = 0x39, /* 0x39 or 0x3d */ |
| .platform_data = &adv7511_pdata, |
| }; |
| struct v4l2_subdev_edid cobalt_edid = { |
| .pad = ADV7842_EDID_PORT_A, |
| .start_block = 0, |
| .blocks = 2, |
| .edid = edid, |
| }; |
| struct cobalt_stream *s = &cobalt->streams[COBALT_HSMA_IN_NODE]; |
| |
| s->i2c_adap = &cobalt->i2c_adap[COBALT_NUM_ADAPTERS - 1]; |
| if (s->i2c_adap->dev.parent == NULL) |
| return 0; |
| cobalt_s_bit_sysctrl(cobalt, COBALT_SYS_CTRL_NRESET_TO_HDMI_BIT(4), 1); |
| |
| s->sd = v4l2_i2c_new_subdev_board(&cobalt->v4l2_dev, |
| s->i2c_adap, &adv7842_info, NULL); |
| if (s->sd) { |
| int err = v4l2_subdev_call(s->sd, pad, set_edid, &cobalt_edid); |
| |
| if (err) |
| return err; |
| err = v4l2_subdev_call(s->sd, pad, set_fmt, NULL, |
| &sd_fmt); |
| if (err) |
| return err; |
| cobalt->have_hsma_rx = true; |
| s->pad_source = ADV7842_PAD_SOURCE; |
| s->is_dummy = false; |
| cobalt->streams[4 + COBALT_AUDIO_IN_STREAM].is_dummy = false; |
| /* Reset channel video module */ |
| cobalt_s_bit_sysctrl(cobalt, |
| COBALT_SYS_CTRL_VIDEO_RX_RESETN_BIT(4), 0); |
| mdelay(2); |
| cobalt_s_bit_sysctrl(cobalt, |
| COBALT_SYS_CTRL_VIDEO_RX_RESETN_BIT(4), 1); |
| mdelay(1); |
| return err; |
| } |
| cobalt_s_bit_sysctrl(cobalt, COBALT_SYS_CTRL_NRESET_TO_HDMI_BIT(4), 0); |
| cobalt_s_bit_sysctrl(cobalt, COBALT_SYS_CTRL_PWRDN0_TO_HSMA_TX_BIT, 0); |
| s++; |
| s->i2c_adap = &cobalt->i2c_adap[COBALT_NUM_ADAPTERS - 1]; |
| s->sd = v4l2_i2c_new_subdev_board(&cobalt->v4l2_dev, |
| s->i2c_adap, &adv7511_info, NULL); |
| if (s->sd) { |
| /* A transmitter is hooked up, so we can set this bit */ |
| cobalt_s_bit_sysctrl(cobalt, |
| COBALT_SYS_CTRL_HSMA_TX_ENABLE_BIT, 1); |
| cobalt_s_bit_sysctrl(cobalt, |
| COBALT_SYS_CTRL_VIDEO_RX_RESETN_BIT(4), 0); |
| cobalt_s_bit_sysctrl(cobalt, |
| COBALT_SYS_CTRL_VIDEO_TX_RESETN_BIT, 1); |
| cobalt->have_hsma_tx = true; |
| v4l2_subdev_call(s->sd, core, s_power, 1); |
| v4l2_subdev_call(s->sd, video, s_stream, 1); |
| v4l2_subdev_call(s->sd, audio, s_stream, 1); |
| v4l2_ctrl_s_ctrl(v4l2_ctrl_find(s->sd->ctrl_handler, |
| V4L2_CID_DV_TX_MODE), V4L2_DV_TX_MODE_HDMI); |
| s->is_dummy = false; |
| cobalt->streams[COBALT_AUDIO_OUT_STREAM].is_dummy = false; |
| return 0; |
| } |
| return -ENODEV; |
| } |
| |
| static int cobalt_probe(struct pci_dev *pci_dev, |
| const struct pci_device_id *pci_id) |
| { |
| struct cobalt *cobalt; |
| int retval = 0; |
| int i; |
| |
| /* FIXME - module parameter arrays constrain max instances */ |
| i = atomic_inc_return(&cobalt_instance) - 1; |
| |
| cobalt = kzalloc(sizeof(struct cobalt), GFP_KERNEL); |
| if (cobalt == NULL) |
| return -ENOMEM; |
| cobalt->pci_dev = pci_dev; |
| cobalt->instance = i; |
| |
| retval = v4l2_device_register(&pci_dev->dev, &cobalt->v4l2_dev); |
| if (retval) { |
| pr_err("cobalt: v4l2_device_register of card %d failed\n", |
| cobalt->instance); |
| kfree(cobalt); |
| return retval; |
| } |
| snprintf(cobalt->v4l2_dev.name, sizeof(cobalt->v4l2_dev.name), |
| "cobalt-%d", cobalt->instance); |
| cobalt->v4l2_dev.notify = cobalt_notify; |
| cobalt_info("Initializing card %d\n", cobalt->instance); |
| |
| cobalt->irq_work_queues = |
| create_singlethread_workqueue(cobalt->v4l2_dev.name); |
| if (cobalt->irq_work_queues == NULL) { |
| cobalt_err("Could not create workqueue\n"); |
| retval = -ENOMEM; |
| goto err; |
| } |
| |
| INIT_WORK(&cobalt->irq_work_queue, cobalt_irq_work_handler); |
| |
| /* PCI Device Setup */ |
| retval = cobalt_setup_pci(cobalt, pci_dev, pci_id); |
| if (retval != 0) |
| goto err_wq; |
| |
| /* Show HDL version info */ |
| if (cobalt_hdl_info_get(cobalt)) |
| cobalt_info("Not able to read the HDL info\n"); |
| else |
| cobalt_info("%s", cobalt->hdl_info); |
| |
| retval = cobalt_i2c_init(cobalt); |
| if (retval) |
| goto err_pci; |
| |
| cobalt_stream_struct_init(cobalt); |
| |
| retval = cobalt_subdevs_init(cobalt); |
| if (retval) |
| goto err_i2c; |
| |
| if (!(cobalt_read_bar1(cobalt, COBALT_SYS_STAT_BASE) & |
| COBALT_SYSSTAT_HSMA_PRSNTN_MSK)) { |
| retval = cobalt_subdevs_hsma_init(cobalt); |
| if (retval) |
| goto err_i2c; |
| } |
| |
| retval = cobalt_nodes_register(cobalt); |
| if (retval) { |
| cobalt_err("Error %d registering device nodes\n", retval); |
| goto err_i2c; |
| } |
| cobalt_set_interrupt(cobalt, true); |
| v4l2_device_call_all(&cobalt->v4l2_dev, 0, core, |
| interrupt_service_routine, 0, NULL); |
| |
| cobalt_info("Initialized cobalt card\n"); |
| |
| cobalt_flash_probe(cobalt); |
| |
| return 0; |
| |
| err_i2c: |
| cobalt_i2c_exit(cobalt); |
| cobalt_s_bit_sysctrl(cobalt, COBALT_SYS_CTRL_HSMA_TX_ENABLE_BIT, 0); |
| err_pci: |
| cobalt_free_msi(cobalt, pci_dev); |
| cobalt_pci_iounmap(cobalt, pci_dev); |
| pci_release_regions(cobalt->pci_dev); |
| pci_disable_device(cobalt->pci_dev); |
| err_wq: |
| destroy_workqueue(cobalt->irq_work_queues); |
| err: |
| cobalt_err("error %d on initialization\n", retval); |
| |
| v4l2_device_unregister(&cobalt->v4l2_dev); |
| kfree(cobalt); |
| return retval; |
| } |
| |
| static void cobalt_remove(struct pci_dev *pci_dev) |
| { |
| struct v4l2_device *v4l2_dev = pci_get_drvdata(pci_dev); |
| struct cobalt *cobalt = to_cobalt(v4l2_dev); |
| int i; |
| |
| cobalt_flash_remove(cobalt); |
| cobalt_set_interrupt(cobalt, false); |
| flush_workqueue(cobalt->irq_work_queues); |
| cobalt_nodes_unregister(cobalt); |
| for (i = 0; i < COBALT_NUM_ADAPTERS; i++) { |
| struct v4l2_subdev *sd = cobalt->streams[i].sd; |
| struct i2c_client *client; |
| |
| if (sd == NULL) |
| continue; |
| client = v4l2_get_subdevdata(sd); |
| v4l2_device_unregister_subdev(sd); |
| i2c_unregister_device(client); |
| } |
| cobalt_i2c_exit(cobalt); |
| cobalt_free_msi(cobalt, pci_dev); |
| cobalt_s_bit_sysctrl(cobalt, COBALT_SYS_CTRL_HSMA_TX_ENABLE_BIT, 0); |
| cobalt_pci_iounmap(cobalt, pci_dev); |
| pci_release_regions(cobalt->pci_dev); |
| pci_disable_device(cobalt->pci_dev); |
| destroy_workqueue(cobalt->irq_work_queues); |
| |
| cobalt_info("removed cobalt card\n"); |
| |
| v4l2_device_unregister(v4l2_dev); |
| kfree(cobalt); |
| } |
| |
| /* define a pci_driver for card detection */ |
| static struct pci_driver cobalt_pci_driver = { |
| .name = "cobalt", |
| .id_table = cobalt_pci_tbl, |
| .probe = cobalt_probe, |
| .remove = cobalt_remove, |
| }; |
| |
| module_pci_driver(cobalt_pci_driver); |