sound/soc/sof/pm.c - linux - Git at Google

 // SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause)
 //
 // This file is provided under a dual BSD/GPLv2 license.  When using or
 // redistributing this file, you may do so under either license.
 //
 // Copyright(c) 2018 Intel Corporation. All rights reserved.
 //
 // Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
 //

 #include "ops.h"
 #include "sof-priv.h"
 #include "sof-audio.h"

 /*
  * Helper function to determine the target DSP state during
  * system suspend. This function only cares about the device
  * D-states. Platform-specific substates, if any, should be
  * handled by the platform-specific parts.
  */
 static u32 snd_sof_dsp_power_target(struct snd_sof_dev *sdev)
 {
 	u32 target_dsp_state;

 	switch (sdev->system_suspend_target) {
 	case SOF_SUSPEND_S3:
 		/* DSP should be in D3 if the system is suspending to S3 */
 		target_dsp_state = SOF_DSP_PM_D3;
 		break;
 	case SOF_SUSPEND_S0IX:
 		/*
 		 * Currently, the only criterion for retaining the DSP in D0
 		 * is that there are streams that ignored the suspend trigger.
 		 * Additional criteria such Soundwire clock-stop mode and
 		 * device suspend latency considerations will be added later.
 		 */
 		if (snd_sof_stream_suspend_ignored(sdev))
 			target_dsp_state = SOF_DSP_PM_D0;
 		else
 			target_dsp_state = SOF_DSP_PM_D3;
 		break;
 	default:
 		/* This case would be during runtime suspend */
 		target_dsp_state = SOF_DSP_PM_D3;
 		break;
 	}

 	return target_dsp_state;
 }

 static int sof_send_pm_ctx_ipc(struct snd_sof_dev *sdev, int cmd)
 {
 	struct sof_ipc_pm_ctx pm_ctx;
 	struct sof_ipc_reply reply;

 	memset(&pm_ctx, 0, sizeof(pm_ctx));

 	/* configure ctx save ipc message */
 	pm_ctx.hdr.size = sizeof(pm_ctx);
 	pm_ctx.hdr.cmd = SOF_IPC_GLB_PM_MSG | cmd;

 	/* send ctx save ipc to dsp */
 	return sof_ipc_tx_message(sdev->ipc, pm_ctx.hdr.cmd, &pm_ctx,
 				 sizeof(pm_ctx), &reply, sizeof(reply));
 }

 #if IS_ENABLED(CONFIG_SND_SOC_SOF_DEBUG_ENABLE_DEBUGFS_CACHE)
 static void sof_cache_debugfs(struct snd_sof_dev *sdev)
 {
 	struct snd_sof_dfsentry *dfse;

 	list_for_each_entry(dfse, &sdev->dfsentry_list, list) {

 		/* nothing to do if debugfs buffer is not IO mem */
 		if (dfse->type == SOF_DFSENTRY_TYPE_BUF)
 			continue;

 		/* cache memory that is only accessible in D0 */
 		if (dfse->access_type == SOF_DEBUGFS_ACCESS_D0_ONLY)
 			memcpy_fromio(dfse->cache_buf, dfse->io_mem,
 				      dfse->size);
 	}
 }
 #endif

 static int sof_resume(struct device *dev, bool runtime_resume)
 {
 	struct snd_sof_dev *sdev = dev_get_drvdata(dev);
 	u32 old_state = sdev->dsp_power_state.state;
 	int ret;

 	/* do nothing if dsp resume callbacks are not set */
 	if (!runtime_resume && !sof_ops(sdev)->resume)
 		return 0;

 	if (runtime_resume && !sof_ops(sdev)->runtime_resume)
 		return 0;

 	/* DSP was never successfully started, nothing to resume */
 	if (sdev->first_boot)
 		return 0;

 	/*
 	 * if the runtime_resume flag is set, call the runtime_resume routine
 	 * or else call the system resume routine
 	 */
 	if (runtime_resume)
 		ret = snd_sof_dsp_runtime_resume(sdev);
 	else
 		ret = snd_sof_dsp_resume(sdev);
 	if (ret < 0) {
 		dev_err(sdev->dev,
 			"error: failed to power up DSP after resume\n");
 		return ret;
 	}

 	/*
 	 * Nothing further to be done for platforms that support the low power
 	 * D0 substate.
 	 */
 	if (!runtime_resume && sof_ops(sdev)->set_power_state &&
 	    old_state == SOF_DSP_PM_D0)
 		return 0;

 	sdev->fw_state = SOF_FW_BOOT_PREPARE;

 	/* load the firmware */
 	ret = snd_sof_load_firmware(sdev);
 	if (ret < 0) {
 		dev_err(sdev->dev,
 			"error: failed to load DSP firmware after resume %d\n",
 			ret);
 		return ret;
 	}

 	sdev->fw_state = SOF_FW_BOOT_IN_PROGRESS;

 	/*
 	 * Boot the firmware. The FW boot status will be modified
 	 * in snd_sof_run_firmware() depending on the outcome.
 	 */
 	ret = snd_sof_run_firmware(sdev);
 	if (ret < 0) {
 		dev_err(sdev->dev,
 			"error: failed to boot DSP firmware after resume %d\n",
 			ret);
 		return ret;
 	}

 	/* resume DMA trace, only need send ipc */
 	ret = snd_sof_init_trace_ipc(sdev);
 	if (ret < 0) {
 		/* non fatal */
 		dev_warn(sdev->dev,
 			 "warning: failed to init trace after resume %d\n",
 			 ret);
 	}

 	/* restore pipelines */
 	ret = sof_restore_pipelines(sdev->dev);
 	if (ret < 0) {
 		dev_err(sdev->dev,
 			"error: failed to restore pipeline after resume %d\n",
 			ret);
 		return ret;
 	}

 	/* notify DSP of system resume */
 	ret = sof_send_pm_ctx_ipc(sdev, SOF_IPC_PM_CTX_RESTORE);
 	if (ret < 0)
 		dev_err(sdev->dev,
 			"error: ctx_restore ipc error during resume %d\n",
 			ret);

 	return ret;
 }

 static int sof_suspend(struct device *dev, bool runtime_suspend)
 {
 	struct snd_sof_dev *sdev = dev_get_drvdata(dev);
 	u32 target_state = 0;
 	int ret;

 	/* do nothing if dsp suspend callback is not set */
 	if (!runtime_suspend && !sof_ops(sdev)->suspend)
 		return 0;

 	if (runtime_suspend && !sof_ops(sdev)->runtime_suspend)
 		return 0;

 	if (sdev->fw_state != SOF_FW_BOOT_COMPLETE)
 		goto suspend;

 	/* set restore_stream for all streams during system suspend */
 	if (!runtime_suspend) {
 		ret = sof_set_hw_params_upon_resume(sdev->dev);
 		if (ret < 0) {
 			dev_err(sdev->dev,
 				"error: setting hw_params flag during suspend %d\n",
 				ret);
 			return ret;
 		}
 	}

 	target_state = snd_sof_dsp_power_target(sdev);

 	/* Skip to platform-specific suspend if DSP is entering D0 */
 	if (target_state == SOF_DSP_PM_D0)
 		goto suspend;

 	/* release trace */
 	snd_sof_release_trace(sdev);

 #if IS_ENABLED(CONFIG_SND_SOC_SOF_DEBUG_ENABLE_DEBUGFS_CACHE)
 	/* cache debugfs contents during runtime suspend */
 	if (runtime_suspend)
 		sof_cache_debugfs(sdev);
 #endif
 	/* notify DSP of upcoming power down */
 	ret = sof_send_pm_ctx_ipc(sdev, SOF_IPC_PM_CTX_SAVE);
 	if (ret == -EBUSY || ret == -EAGAIN) {
 		/*
 		 * runtime PM has logic to handle -EBUSY/-EAGAIN so
 		 * pass these errors up
 		 */
 		dev_err(sdev->dev,
 			"error: ctx_save ipc error during suspend %d\n",
 			ret);
 		return ret;
 	} else if (ret < 0) {
 		/* FW in unexpected state, continue to power down */
 		dev_warn(sdev->dev,
 			 "ctx_save ipc error %d, proceeding with suspend\n",
 			 ret);
 	}

 suspend:

 	/* return if the DSP was not probed successfully */
 	if (sdev->fw_state == SOF_FW_BOOT_NOT_STARTED)
 		return 0;

 	/* platform-specific suspend */
 	if (runtime_suspend)
 		ret = snd_sof_dsp_runtime_suspend(sdev);
 	else
 		ret = snd_sof_dsp_suspend(sdev, target_state);
 	if (ret < 0)
 		dev_err(sdev->dev,
 			"error: failed to power down DSP during suspend %d\n",
 			ret);

 	/* Do not reset FW state if DSP is in D0 */
 	if (target_state == SOF_DSP_PM_D0)
 		return ret;

 	/* reset FW state */
 	sdev->fw_state = SOF_FW_BOOT_NOT_STARTED;

 	return ret;
 }

 int snd_sof_dsp_power_down_notify(struct snd_sof_dev *sdev)
 {
 	/* Notify DSP of upcoming power down */
 	if (sof_ops(sdev)->remove)
 		return sof_send_pm_ctx_ipc(sdev, SOF_IPC_PM_CTX_SAVE);

 	return 0;
 }

 int snd_sof_runtime_suspend(struct device *dev)
 {
 	return sof_suspend(dev, true);
 }
 EXPORT_SYMBOL(snd_sof_runtime_suspend);

 int snd_sof_runtime_idle(struct device *dev)
 {
 	struct snd_sof_dev *sdev = dev_get_drvdata(dev);

 	return snd_sof_dsp_runtime_idle(sdev);
 }
 EXPORT_SYMBOL(snd_sof_runtime_idle);

 int snd_sof_runtime_resume(struct device *dev)
 {
 	return sof_resume(dev, true);
 }
 EXPORT_SYMBOL(snd_sof_runtime_resume);

 int snd_sof_resume(struct device *dev)
 {
 	return sof_resume(dev, false);
 }
 EXPORT_SYMBOL(snd_sof_resume);

 int snd_sof_suspend(struct device *dev)
 {
 	return sof_suspend(dev, false);
 }
 EXPORT_SYMBOL(snd_sof_suspend);

 int snd_sof_prepare(struct device *dev)
 {
 	struct snd_sof_dev *sdev = dev_get_drvdata(dev);

 #if defined(CONFIG_ACPI)
 	if (acpi_target_system_state() == ACPI_STATE_S0)
 		sdev->system_suspend_target = SOF_SUSPEND_S0IX;
 	else
 		sdev->system_suspend_target = SOF_SUSPEND_S3;
 #else
 	/* will suspend to S3 by default */
 	sdev->system_suspend_target = SOF_SUSPEND_S3;
 #endif

 	return 0;
 }
 EXPORT_SYMBOL(snd_sof_prepare);

 void snd_sof_complete(struct device *dev)
 {
 	struct snd_sof_dev *sdev = dev_get_drvdata(dev);

 	sdev->system_suspend_target = SOF_SUSPEND_NONE;
 }
 EXPORT_SYMBOL(snd_sof_complete);
	// SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause)
	//
	// This file is provided under a dual BSD/GPLv2 license. When using or
	// redistributing this file, you may do so under either license.
	//
	// Copyright(c) 2018 Intel Corporation. All rights reserved.
	//
	// Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
	//

	#include "ops.h"
	#include "sof-priv.h"
	#include "sof-audio.h"

	/*
	* Helper function to determine the target DSP state during
	* system suspend. This function only cares about the device
	* D-states. Platform-specific substates, if any, should be
	* handled by the platform-specific parts.
	*/
	static u32 snd_sof_dsp_power_target(struct snd_sof_dev *sdev)
	{
	u32 target_dsp_state;

	switch (sdev->system_suspend_target) {
	case SOF_SUSPEND_S3:
	/* DSP should be in D3 if the system is suspending to S3 */
	target_dsp_state = SOF_DSP_PM_D3;
	break;
	case SOF_SUSPEND_S0IX:
	/*
	* Currently, the only criterion for retaining the DSP in D0
	* is that there are streams that ignored the suspend trigger.
	* Additional criteria such Soundwire clock-stop mode and
	* device suspend latency considerations will be added later.
	*/
	if (snd_sof_stream_suspend_ignored(sdev))
	target_dsp_state = SOF_DSP_PM_D0;
	else
	target_dsp_state = SOF_DSP_PM_D3;
	break;
	default:
	/* This case would be during runtime suspend */
	target_dsp_state = SOF_DSP_PM_D3;
	break;
	}

	return target_dsp_state;
	}

	static int sof_send_pm_ctx_ipc(struct snd_sof_dev *sdev, int cmd)
	{
	struct sof_ipc_pm_ctx pm_ctx;
	struct sof_ipc_reply reply;

	memset(&pm_ctx, 0, sizeof(pm_ctx));

	/* configure ctx save ipc message */
	pm_ctx.hdr.size = sizeof(pm_ctx);
	pm_ctx.hdr.cmd = SOF_IPC_GLB_PM_MSG \| cmd;

	/* send ctx save ipc to dsp */
	return sof_ipc_tx_message(sdev->ipc, pm_ctx.hdr.cmd, &pm_ctx,
	sizeof(pm_ctx), &reply, sizeof(reply));
	}

	#if IS_ENABLED(CONFIG_SND_SOC_SOF_DEBUG_ENABLE_DEBUGFS_CACHE)
	static void sof_cache_debugfs(struct snd_sof_dev *sdev)
	{
	struct snd_sof_dfsentry *dfse;

	list_for_each_entry(dfse, &sdev->dfsentry_list, list) {

	/* nothing to do if debugfs buffer is not IO mem */
	if (dfse->type == SOF_DFSENTRY_TYPE_BUF)
	continue;

	/* cache memory that is only accessible in D0 */
	if (dfse->access_type == SOF_DEBUGFS_ACCESS_D0_ONLY)
	memcpy_fromio(dfse->cache_buf, dfse->io_mem,
	dfse->size);
	}
	}
	#endif

	static int sof_resume(struct device *dev, bool runtime_resume)
	{
	struct snd_sof_dev *sdev = dev_get_drvdata(dev);
	u32 old_state = sdev->dsp_power_state.state;
	int ret;

	/* do nothing if dsp resume callbacks are not set */
	if (!runtime_resume && !sof_ops(sdev)->resume)
	return 0;

	if (runtime_resume && !sof_ops(sdev)->runtime_resume)
	return 0;

	/* DSP was never successfully started, nothing to resume */
	if (sdev->first_boot)
	return 0;

	/*
	* if the runtime_resume flag is set, call the runtime_resume routine
	* or else call the system resume routine
	*/
	if (runtime_resume)
	ret = snd_sof_dsp_runtime_resume(sdev);
	else
	ret = snd_sof_dsp_resume(sdev);
	if (ret < 0) {
	dev_err(sdev->dev,
	"error: failed to power up DSP after resume\n");
	return ret;
	}

	/*
	* Nothing further to be done for platforms that support the low power
	* D0 substate.
	*/
	if (!runtime_resume && sof_ops(sdev)->set_power_state &&
	old_state == SOF_DSP_PM_D0)
	return 0;

	sdev->fw_state = SOF_FW_BOOT_PREPARE;

	/* load the firmware */
	ret = snd_sof_load_firmware(sdev);
	if (ret < 0) {
	dev_err(sdev->dev,
	"error: failed to load DSP firmware after resume %d\n",
	ret);
	return ret;
	}

	sdev->fw_state = SOF_FW_BOOT_IN_PROGRESS;

	/*
	* Boot the firmware. The FW boot status will be modified
	* in snd_sof_run_firmware() depending on the outcome.
	*/
	ret = snd_sof_run_firmware(sdev);
	if (ret < 0) {
	dev_err(sdev->dev,
	"error: failed to boot DSP firmware after resume %d\n",
	ret);
	return ret;
	}

	/* resume DMA trace, only need send ipc */
	ret = snd_sof_init_trace_ipc(sdev);
	if (ret < 0) {
	/* non fatal */
	dev_warn(sdev->dev,
	"warning: failed to init trace after resume %d\n",
	ret);
	}

	/* restore pipelines */
	ret = sof_restore_pipelines(sdev->dev);
	if (ret < 0) {
	dev_err(sdev->dev,
	"error: failed to restore pipeline after resume %d\n",
	ret);
	return ret;
	}

	/* notify DSP of system resume */
	ret = sof_send_pm_ctx_ipc(sdev, SOF_IPC_PM_CTX_RESTORE);
	if (ret < 0)
	dev_err(sdev->dev,
	"error: ctx_restore ipc error during resume %d\n",
	ret);

	return ret;
	}

	static int sof_suspend(struct device *dev, bool runtime_suspend)
	{
	struct snd_sof_dev *sdev = dev_get_drvdata(dev);
	u32 target_state = 0;
	int ret;

	/* do nothing if dsp suspend callback is not set */
	if (!runtime_suspend && !sof_ops(sdev)->suspend)
	return 0;

	if (runtime_suspend && !sof_ops(sdev)->runtime_suspend)
	return 0;

	if (sdev->fw_state != SOF_FW_BOOT_COMPLETE)
	goto suspend;

	/* set restore_stream for all streams during system suspend */
	if (!runtime_suspend) {
	ret = sof_set_hw_params_upon_resume(sdev->dev);
	if (ret < 0) {
	dev_err(sdev->dev,
	"error: setting hw_params flag during suspend %d\n",
	ret);
	return ret;
	}
	}

	target_state = snd_sof_dsp_power_target(sdev);

	/* Skip to platform-specific suspend if DSP is entering D0 */
	if (target_state == SOF_DSP_PM_D0)
	goto suspend;

	/* release trace */
	snd_sof_release_trace(sdev);

	#if IS_ENABLED(CONFIG_SND_SOC_SOF_DEBUG_ENABLE_DEBUGFS_CACHE)
	/* cache debugfs contents during runtime suspend */
	if (runtime_suspend)
	sof_cache_debugfs(sdev);
	#endif
	/* notify DSP of upcoming power down */
	ret = sof_send_pm_ctx_ipc(sdev, SOF_IPC_PM_CTX_SAVE);
	if (ret == -EBUSY \|\| ret == -EAGAIN) {
	/*
	* runtime PM has logic to handle -EBUSY/-EAGAIN so
	* pass these errors up
	*/
	dev_err(sdev->dev,
	"error: ctx_save ipc error during suspend %d\n",
	ret);
	return ret;
	} else if (ret < 0) {
	/* FW in unexpected state, continue to power down */
	dev_warn(sdev->dev,
	"ctx_save ipc error %d, proceeding with suspend\n",
	ret);
	}

	suspend:

	/* return if the DSP was not probed successfully */
	if (sdev->fw_state == SOF_FW_BOOT_NOT_STARTED)
	return 0;

	/* platform-specific suspend */
	if (runtime_suspend)
	ret = snd_sof_dsp_runtime_suspend(sdev);
	else
	ret = snd_sof_dsp_suspend(sdev, target_state);
	if (ret < 0)
	dev_err(sdev->dev,
	"error: failed to power down DSP during suspend %d\n",
	ret);

	/* Do not reset FW state if DSP is in D0 */
	if (target_state == SOF_DSP_PM_D0)
	return ret;

	/* reset FW state */
	sdev->fw_state = SOF_FW_BOOT_NOT_STARTED;

	return ret;
	}

	int snd_sof_dsp_power_down_notify(struct snd_sof_dev *sdev)
	{
	/* Notify DSP of upcoming power down */
	if (sof_ops(sdev)->remove)
	return sof_send_pm_ctx_ipc(sdev, SOF_IPC_PM_CTX_SAVE);

	return 0;
	}

	int snd_sof_runtime_suspend(struct device *dev)
	{
	return sof_suspend(dev, true);
	}
	EXPORT_SYMBOL(snd_sof_runtime_suspend);

	int snd_sof_runtime_idle(struct device *dev)
	{
	struct snd_sof_dev *sdev = dev_get_drvdata(dev);

	return snd_sof_dsp_runtime_idle(sdev);
	}
	EXPORT_SYMBOL(snd_sof_runtime_idle);

	int snd_sof_runtime_resume(struct device *dev)
	{
	return sof_resume(dev, true);
	}
	EXPORT_SYMBOL(snd_sof_runtime_resume);

	int snd_sof_resume(struct device *dev)
	{
	return sof_resume(dev, false);
	}
	EXPORT_SYMBOL(snd_sof_resume);

	int snd_sof_suspend(struct device *dev)
	{
	return sof_suspend(dev, false);
	}
	EXPORT_SYMBOL(snd_sof_suspend);

	int snd_sof_prepare(struct device *dev)
	{
	struct snd_sof_dev *sdev = dev_get_drvdata(dev);

	#if defined(CONFIG_ACPI)
	if (acpi_target_system_state() == ACPI_STATE_S0)
	sdev->system_suspend_target = SOF_SUSPEND_S0IX;
	else
	sdev->system_suspend_target = SOF_SUSPEND_S3;
	#else
	/* will suspend to S3 by default */
	sdev->system_suspend_target = SOF_SUSPEND_S3;
	#endif

	return 0;
	}
	EXPORT_SYMBOL(snd_sof_prepare);

	void snd_sof_complete(struct device *dev)
	{
	struct snd_sof_dev *sdev = dev_get_drvdata(dev);

	sdev->system_suspend_target = SOF_SUSPEND_NONE;
	}
	EXPORT_SYMBOL(snd_sof_complete);