drivers/pwm/pwm-stm32-lp.c - linux - Git at Google

 // SPDX-License-Identifier: GPL-2.0
 /*
  * STM32 Low-Power Timer PWM driver
  *
  * Copyright (C) STMicroelectronics 2017
  *
  * Author: Gerald Baeza <gerald.baeza@st.com>
  *
  * Inspired by Gerald Baeza's pwm-stm32 driver
  */

 #include <linux/bitfield.h>
 #include <linux/mfd/stm32-lptimer.h>
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/pinctrl/consumer.h>
 #include <linux/platform_device.h>
 #include <linux/pwm.h>

 struct stm32_pwm_lp {
 	struct pwm_chip chip;
 	struct clk *clk;
 	struct regmap *regmap;
 };

 static inline struct stm32_pwm_lp *to_stm32_pwm_lp(struct pwm_chip *chip)
 {
 	return container_of(chip, struct stm32_pwm_lp, chip);
 }

 /* STM32 Low-Power Timer is preceded by a configurable power-of-2 prescaler */
 #define STM32_LPTIM_MAX_PRESCALER	128

 static int stm32_pwm_lp_apply(struct pwm_chip *chip, struct pwm_device *pwm,
 			      const struct pwm_state *state)
 {
 	struct stm32_pwm_lp *priv = to_stm32_pwm_lp(chip);
 	unsigned long long prd, div, dty;
 	struct pwm_state cstate;
 	u32 val, mask, cfgr, presc = 0;
 	bool reenable;
 	int ret;

 	pwm_get_state(pwm, &cstate);
 	reenable = !cstate.enabled;

 	if (!state->enabled) {
 		if (cstate.enabled) {
 			/* Disable LP timer */
 			ret = regmap_write(priv->regmap, STM32_LPTIM_CR, 0);
 			if (ret)
 				return ret;
 			/* disable clock to PWM counter */
 			clk_disable(priv->clk);
 		}
 		return 0;
 	}

 	/* Calculate the period and prescaler value */
 	div = (unsigned long long)clk_get_rate(priv->clk) * state->period;
 	do_div(div, NSEC_PER_SEC);
 	if (!div) {
 		/* Clock is too slow to achieve requested period. */
 		dev_dbg(priv->chip.dev, "Can't reach %llu ns\n", state->period);
 		return -EINVAL;
 	}

 	prd = div;
 	while (div > STM32_LPTIM_MAX_ARR) {
 		presc++;
 		if ((1 << presc) > STM32_LPTIM_MAX_PRESCALER) {
 			dev_err(priv->chip.dev, "max prescaler exceeded\n");
 			return -EINVAL;
 		}
 		div = prd >> presc;
 	}
 	prd = div;

 	/* Calculate the duty cycle */
 	dty = prd * state->duty_cycle;
 	do_div(dty, state->period);

 	if (!cstate.enabled) {
 		/* enable clock to drive PWM counter */
 		ret = clk_enable(priv->clk);
 		if (ret)
 			return ret;
 	}

 	ret = regmap_read(priv->regmap, STM32_LPTIM_CFGR, &cfgr);
 	if (ret)
 		goto err;

 	if ((FIELD_GET(STM32_LPTIM_PRESC, cfgr) != presc) ||
 	    (FIELD_GET(STM32_LPTIM_WAVPOL, cfgr) != state->polarity)) {
 		val = FIELD_PREP(STM32_LPTIM_PRESC, presc);
 		val |= FIELD_PREP(STM32_LPTIM_WAVPOL, state->polarity);
 		mask = STM32_LPTIM_PRESC | STM32_LPTIM_WAVPOL;

 		/* Must disable LP timer to modify CFGR */
 		reenable = true;
 		ret = regmap_write(priv->regmap, STM32_LPTIM_CR, 0);
 		if (ret)
 			goto err;

 		ret = regmap_update_bits(priv->regmap, STM32_LPTIM_CFGR, mask,
 					 val);
 		if (ret)
 			goto err;
 	}

 	if (reenable) {
 		/* Must (re)enable LP timer to modify CMP & ARR */
 		ret = regmap_write(priv->regmap, STM32_LPTIM_CR,
 				   STM32_LPTIM_ENABLE);
 		if (ret)
 			goto err;
 	}

 	ret = regmap_write(priv->regmap, STM32_LPTIM_ARR, prd - 1);
 	if (ret)
 		goto err;

 	ret = regmap_write(priv->regmap, STM32_LPTIM_CMP, prd - (1 + dty));
 	if (ret)
 		goto err;

 	/* ensure CMP & ARR registers are properly written */
 	ret = regmap_read_poll_timeout(priv->regmap, STM32_LPTIM_ISR, val,
 				       (val & STM32_LPTIM_CMPOK_ARROK) == STM32_LPTIM_CMPOK_ARROK,
 				       100, 1000);
 	if (ret) {
 		dev_err(priv->chip.dev, "ARR/CMP registers write issue\n");
 		goto err;
 	}
 	ret = regmap_write(priv->regmap, STM32_LPTIM_ICR,
 			   STM32_LPTIM_CMPOKCF_ARROKCF);
 	if (ret)
 		goto err;

 	if (reenable) {
 		/* Start LP timer in continuous mode */
 		ret = regmap_set_bits(priv->regmap, STM32_LPTIM_CR,
 				      STM32_LPTIM_CNTSTRT);
 		if (ret) {
 			regmap_write(priv->regmap, STM32_LPTIM_CR, 0);
 			goto err;
 		}
 	}

 	return 0;
 err:
 	if (!cstate.enabled)
 		clk_disable(priv->clk);

 	return ret;
 }

 static int stm32_pwm_lp_get_state(struct pwm_chip *chip,
 				  struct pwm_device *pwm,
 				  struct pwm_state *state)
 {
 	struct stm32_pwm_lp *priv = to_stm32_pwm_lp(chip);
 	unsigned long rate = clk_get_rate(priv->clk);
 	u32 val, presc, prd;
 	u64 tmp;

 	regmap_read(priv->regmap, STM32_LPTIM_CR, &val);
 	state->enabled = !!FIELD_GET(STM32_LPTIM_ENABLE, val);
 	/* Keep PWM counter clock refcount in sync with PWM initial state */
 	if (state->enabled)
 		clk_enable(priv->clk);

 	regmap_read(priv->regmap, STM32_LPTIM_CFGR, &val);
 	presc = FIELD_GET(STM32_LPTIM_PRESC, val);
 	state->polarity = FIELD_GET(STM32_LPTIM_WAVPOL, val);

 	regmap_read(priv->regmap, STM32_LPTIM_ARR, &prd);
 	tmp = prd + 1;
 	tmp = (tmp << presc) * NSEC_PER_SEC;
 	state->period = DIV_ROUND_CLOSEST_ULL(tmp, rate);

 	regmap_read(priv->regmap, STM32_LPTIM_CMP, &val);
 	tmp = prd - val;
 	tmp = (tmp << presc) * NSEC_PER_SEC;
 	state->duty_cycle = DIV_ROUND_CLOSEST_ULL(tmp, rate);

 	return 0;
 }

 static const struct pwm_ops stm32_pwm_lp_ops = {
 	.apply = stm32_pwm_lp_apply,
 	.get_state = stm32_pwm_lp_get_state,
 };

 static int stm32_pwm_lp_probe(struct platform_device *pdev)
 {
 	struct stm32_lptimer *ddata = dev_get_drvdata(pdev->dev.parent);
 	struct stm32_pwm_lp *priv;
 	int ret;

 	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
 	if (!priv)
 		return -ENOMEM;

 	priv->regmap = ddata->regmap;
 	priv->clk = ddata->clk;
 	priv->chip.dev = &pdev->dev;
 	priv->chip.ops = &stm32_pwm_lp_ops;
 	priv->chip.npwm = 1;

 	ret = devm_pwmchip_add(&pdev->dev, &priv->chip);
 	if (ret < 0)
 		return ret;

 	platform_set_drvdata(pdev, priv);

 	return 0;
 }

 static int __maybe_unused stm32_pwm_lp_suspend(struct device *dev)
 {
 	struct stm32_pwm_lp *priv = dev_get_drvdata(dev);
 	struct pwm_state state;

 	pwm_get_state(&priv->chip.pwms[0], &state);
 	if (state.enabled) {
 		dev_err(dev, "The consumer didn't stop us (%s)\n",
 			priv->chip.pwms[0].label);
 		return -EBUSY;
 	}

 	return pinctrl_pm_select_sleep_state(dev);
 }

 static int __maybe_unused stm32_pwm_lp_resume(struct device *dev)
 {
 	return pinctrl_pm_select_default_state(dev);
 }

 static SIMPLE_DEV_PM_OPS(stm32_pwm_lp_pm_ops, stm32_pwm_lp_suspend,
 			 stm32_pwm_lp_resume);

 static const struct of_device_id stm32_pwm_lp_of_match[] = {
 	{ .compatible = "st,stm32-pwm-lp", },
 	{},
 };
 MODULE_DEVICE_TABLE(of, stm32_pwm_lp_of_match);

 static struct platform_driver stm32_pwm_lp_driver = {
 	.probe	= stm32_pwm_lp_probe,
 	.driver	= {
 		.name = "stm32-pwm-lp",
 		.of_match_table = stm32_pwm_lp_of_match,
 		.pm = &stm32_pwm_lp_pm_ops,
 	},
 };
 module_platform_driver(stm32_pwm_lp_driver);

 MODULE_ALIAS("platform:stm32-pwm-lp");
 MODULE_DESCRIPTION("STMicroelectronics STM32 PWM LP driver");
 MODULE_LICENSE("GPL v2");
	// SPDX-License-Identifier: GPL-2.0
	/*
	* STM32 Low-Power Timer PWM driver
	*
	* Copyright (C) STMicroelectronics 2017
	*
	* Author: Gerald Baeza <gerald.baeza@st.com>
	*
	* Inspired by Gerald Baeza's pwm-stm32 driver
	*/

	#include <linux/bitfield.h>
	#include <linux/mfd/stm32-lptimer.h>
	#include <linux/module.h>
	#include <linux/of.h>
	#include <linux/pinctrl/consumer.h>
	#include <linux/platform_device.h>
	#include <linux/pwm.h>

	struct stm32_pwm_lp {
	struct pwm_chip chip;
	struct clk *clk;
	struct regmap *regmap;
	};

	static inline struct stm32_pwm_lp to_stm32_pwm_lp(struct pwm_chip chip)
	{
	return container_of(chip, struct stm32_pwm_lp, chip);
	}

	/* STM32 Low-Power Timer is preceded by a configurable power-of-2 prescaler */
	#define STM32_LPTIM_MAX_PRESCALER 128

	static int stm32_pwm_lp_apply(struct pwm_chip chip, struct pwm_device pwm,
	const struct pwm_state *state)
	{
	struct stm32_pwm_lp *priv = to_stm32_pwm_lp(chip);
	unsigned long long prd, div, dty;
	struct pwm_state cstate;
	u32 val, mask, cfgr, presc = 0;
	bool reenable;
	int ret;

	pwm_get_state(pwm, &cstate);
	reenable = !cstate.enabled;

	if (!state->enabled) {
	if (cstate.enabled) {
	/* Disable LP timer */
	ret = regmap_write(priv->regmap, STM32_LPTIM_CR, 0);
	if (ret)
	return ret;
	/* disable clock to PWM counter */
	clk_disable(priv->clk);
	}
	return 0;
	}

	/* Calculate the period and prescaler value */
	div = (unsigned long long)clk_get_rate(priv->clk) * state->period;
	do_div(div, NSEC_PER_SEC);
	if (!div) {
	/* Clock is too slow to achieve requested period. */
	dev_dbg(priv->chip.dev, "Can't reach %llu ns\n", state->period);
	return -EINVAL;
	}

	prd = div;
	while (div > STM32_LPTIM_MAX_ARR) {
	presc++;
	if ((1 << presc) > STM32_LPTIM_MAX_PRESCALER) {
	dev_err(priv->chip.dev, "max prescaler exceeded\n");
	return -EINVAL;
	}
	div = prd >> presc;
	}
	prd = div;

	/* Calculate the duty cycle */
	dty = prd * state->duty_cycle;
	do_div(dty, state->period);

	if (!cstate.enabled) {
	/* enable clock to drive PWM counter */
	ret = clk_enable(priv->clk);
	if (ret)
	return ret;
	}

	ret = regmap_read(priv->regmap, STM32_LPTIM_CFGR, &cfgr);
	if (ret)
	goto err;

	if ((FIELD_GET(STM32_LPTIM_PRESC, cfgr) != presc) \|\|
	(FIELD_GET(STM32_LPTIM_WAVPOL, cfgr) != state->polarity)) {
	val = FIELD_PREP(STM32_LPTIM_PRESC, presc);
	val \|= FIELD_PREP(STM32_LPTIM_WAVPOL, state->polarity);
	mask = STM32_LPTIM_PRESC \| STM32_LPTIM_WAVPOL;

	/* Must disable LP timer to modify CFGR */
	reenable = true;
	ret = regmap_write(priv->regmap, STM32_LPTIM_CR, 0);
	if (ret)
	goto err;

	ret = regmap_update_bits(priv->regmap, STM32_LPTIM_CFGR, mask,
	val);
	if (ret)
	goto err;
	}

	if (reenable) {
	/* Must (re)enable LP timer to modify CMP & ARR */
	ret = regmap_write(priv->regmap, STM32_LPTIM_CR,
	STM32_LPTIM_ENABLE);
	if (ret)
	goto err;
	}

	ret = regmap_write(priv->regmap, STM32_LPTIM_ARR, prd - 1);
	if (ret)
	goto err;

	ret = regmap_write(priv->regmap, STM32_LPTIM_CMP, prd - (1 + dty));
	if (ret)
	goto err;

	/* ensure CMP & ARR registers are properly written */
	ret = regmap_read_poll_timeout(priv->regmap, STM32_LPTIM_ISR, val,
	(val & STM32_LPTIM_CMPOK_ARROK) == STM32_LPTIM_CMPOK_ARROK,
	100, 1000);
	if (ret) {
	dev_err(priv->chip.dev, "ARR/CMP registers write issue\n");
	goto err;
	}
	ret = regmap_write(priv->regmap, STM32_LPTIM_ICR,
	STM32_LPTIM_CMPOKCF_ARROKCF);
	if (ret)
	goto err;

	if (reenable) {
	/* Start LP timer in continuous mode */
	ret = regmap_set_bits(priv->regmap, STM32_LPTIM_CR,
	STM32_LPTIM_CNTSTRT);
	if (ret) {
	regmap_write(priv->regmap, STM32_LPTIM_CR, 0);
	goto err;
	}
	}

	return 0;
	err:
	if (!cstate.enabled)
	clk_disable(priv->clk);

	return ret;
	}

	static int stm32_pwm_lp_get_state(struct pwm_chip *chip,
	struct pwm_device *pwm,
	struct pwm_state *state)
	{
	struct stm32_pwm_lp *priv = to_stm32_pwm_lp(chip);
	unsigned long rate = clk_get_rate(priv->clk);
	u32 val, presc, prd;
	u64 tmp;

	regmap_read(priv->regmap, STM32_LPTIM_CR, &val);
	state->enabled = !!FIELD_GET(STM32_LPTIM_ENABLE, val);
	/* Keep PWM counter clock refcount in sync with PWM initial state */
	if (state->enabled)
	clk_enable(priv->clk);

	regmap_read(priv->regmap, STM32_LPTIM_CFGR, &val);
	presc = FIELD_GET(STM32_LPTIM_PRESC, val);
	state->polarity = FIELD_GET(STM32_LPTIM_WAVPOL, val);

	regmap_read(priv->regmap, STM32_LPTIM_ARR, &prd);
	tmp = prd + 1;
	tmp = (tmp << presc) * NSEC_PER_SEC;
	state->period = DIV_ROUND_CLOSEST_ULL(tmp, rate);

	regmap_read(priv->regmap, STM32_LPTIM_CMP, &val);
	tmp = prd - val;
	tmp = (tmp << presc) * NSEC_PER_SEC;
	state->duty_cycle = DIV_ROUND_CLOSEST_ULL(tmp, rate);

	return 0;
	}

	static const struct pwm_ops stm32_pwm_lp_ops = {
	.apply = stm32_pwm_lp_apply,
	.get_state = stm32_pwm_lp_get_state,
	};

	static int stm32_pwm_lp_probe(struct platform_device *pdev)
	{
	struct stm32_lptimer *ddata = dev_get_drvdata(pdev->dev.parent);
	struct stm32_pwm_lp *priv;
	int ret;

	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
	if (!priv)
	return -ENOMEM;

	priv->regmap = ddata->regmap;
	priv->clk = ddata->clk;
	priv->chip.dev = &pdev->dev;
	priv->chip.ops = &stm32_pwm_lp_ops;
	priv->chip.npwm = 1;

	ret = devm_pwmchip_add(&pdev->dev, &priv->chip);
	if (ret < 0)
	return ret;

	platform_set_drvdata(pdev, priv);

	return 0;
	}

	static int __maybe_unused stm32_pwm_lp_suspend(struct device *dev)
	{
	struct stm32_pwm_lp *priv = dev_get_drvdata(dev);
	struct pwm_state state;

	pwm_get_state(&priv->chip.pwms[0], &state);
	if (state.enabled) {
	dev_err(dev, "The consumer didn't stop us (%s)\n",
	priv->chip.pwms[0].label);
	return -EBUSY;
	}

	return pinctrl_pm_select_sleep_state(dev);
	}

	static int __maybe_unused stm32_pwm_lp_resume(struct device *dev)
	{
	return pinctrl_pm_select_default_state(dev);
	}

	static SIMPLE_DEV_PM_OPS(stm32_pwm_lp_pm_ops, stm32_pwm_lp_suspend,
	stm32_pwm_lp_resume);

	static const struct of_device_id stm32_pwm_lp_of_match[] = {
	{ .compatible = "st,stm32-pwm-lp", },
	{},
	};
	MODULE_DEVICE_TABLE(of, stm32_pwm_lp_of_match);

	static struct platform_driver stm32_pwm_lp_driver = {
	.probe = stm32_pwm_lp_probe,
	.driver = {
	.name = "stm32-pwm-lp",
	.of_match_table = stm32_pwm_lp_of_match,
	.pm = &stm32_pwm_lp_pm_ops,
	},
	};
	module_platform_driver(stm32_pwm_lp_driver);

	MODULE_ALIAS("platform:stm32-pwm-lp");
	MODULE_DESCRIPTION("STMicroelectronics STM32 PWM LP driver");
	MODULE_LICENSE("GPL v2");