| /* |
| * Common pmac/prep/chrp pci routines. -- Cort |
| */ |
| |
| #include <linux/config.h> |
| #include <linux/kernel.h> |
| #include <linux/pci.h> |
| #include <linux/delay.h> |
| #include <linux/string.h> |
| #include <linux/init.h> |
| #include <linux/capability.h> |
| #include <linux/sched.h> |
| #include <linux/errno.h> |
| #include <linux/bootmem.h> |
| |
| #include <asm/processor.h> |
| #include <asm/io.h> |
| #include <asm/prom.h> |
| #include <asm/sections.h> |
| #include <asm/pci-bridge.h> |
| #include <asm/byteorder.h> |
| #include <asm/irq.h> |
| #include <asm/uaccess.h> |
| |
| #undef DEBUG |
| |
| #ifdef DEBUG |
| #define DBG(x...) printk(x) |
| #else |
| #define DBG(x...) |
| #endif |
| |
| unsigned long isa_io_base = 0; |
| unsigned long isa_mem_base = 0; |
| unsigned long pci_dram_offset = 0; |
| int pcibios_assign_bus_offset = 1; |
| |
| void pcibios_make_OF_bus_map(void); |
| |
| static int pci_relocate_bridge_resource(struct pci_bus *bus, int i); |
| static int probe_resource(struct pci_bus *parent, struct resource *pr, |
| struct resource *res, struct resource **conflict); |
| static void update_bridge_base(struct pci_bus *bus, int i); |
| static void pcibios_fixup_resources(struct pci_dev* dev); |
| static void fixup_broken_pcnet32(struct pci_dev* dev); |
| static int reparent_resources(struct resource *parent, struct resource *res); |
| static void fixup_rev1_53c810(struct pci_dev* dev); |
| static void fixup_cpc710_pci64(struct pci_dev* dev); |
| #ifdef CONFIG_PPC_OF |
| static u8* pci_to_OF_bus_map; |
| #endif |
| |
| /* By default, we don't re-assign bus numbers. We do this only on |
| * some pmacs |
| */ |
| int pci_assign_all_busses; |
| |
| struct pci_controller* hose_head; |
| struct pci_controller** hose_tail = &hose_head; |
| |
| static int pci_bus_count; |
| |
| static void |
| fixup_rev1_53c810(struct pci_dev* dev) |
| { |
| /* rev 1 ncr53c810 chips don't set the class at all which means |
| * they don't get their resources remapped. Fix that here. |
| */ |
| |
| if ((dev->class == PCI_CLASS_NOT_DEFINED)) { |
| printk("NCR 53c810 rev 1 detected, setting PCI class.\n"); |
| dev->class = PCI_CLASS_STORAGE_SCSI; |
| } |
| } |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NCR, PCI_DEVICE_ID_NCR_53C810, fixup_rev1_53c810); |
| |
| static void |
| fixup_broken_pcnet32(struct pci_dev* dev) |
| { |
| if ((dev->class>>8 == PCI_CLASS_NETWORK_ETHERNET)) { |
| dev->vendor = PCI_VENDOR_ID_AMD; |
| pci_write_config_word(dev, PCI_VENDOR_ID, PCI_VENDOR_ID_AMD); |
| } |
| } |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TRIDENT, PCI_ANY_ID, fixup_broken_pcnet32); |
| |
| static void |
| fixup_cpc710_pci64(struct pci_dev* dev) |
| { |
| /* Hide the PCI64 BARs from the kernel as their content doesn't |
| * fit well in the resource management |
| */ |
| dev->resource[0].start = dev->resource[0].end = 0; |
| dev->resource[0].flags = 0; |
| dev->resource[1].start = dev->resource[1].end = 0; |
| dev->resource[1].flags = 0; |
| } |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CPC710_PCI64, fixup_cpc710_pci64); |
| |
| static void |
| pcibios_fixup_resources(struct pci_dev *dev) |
| { |
| struct pci_controller* hose = (struct pci_controller *)dev->sysdata; |
| int i; |
| unsigned long offset; |
| |
| if (!hose) { |
| printk(KERN_ERR "No hose for PCI dev %s!\n", pci_name(dev)); |
| return; |
| } |
| for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) { |
| struct resource *res = dev->resource + i; |
| if (!res->flags) |
| continue; |
| if (res->end == 0xffffffff) { |
| DBG("PCI:%s Resource %d [%08lx-%08lx] is unassigned\n", |
| pci_name(dev), i, res->start, res->end); |
| res->end -= res->start; |
| res->start = 0; |
| res->flags |= IORESOURCE_UNSET; |
| continue; |
| } |
| offset = 0; |
| if (res->flags & IORESOURCE_MEM) { |
| offset = hose->pci_mem_offset; |
| } else if (res->flags & IORESOURCE_IO) { |
| offset = (unsigned long) hose->io_base_virt |
| - isa_io_base; |
| } |
| if (offset != 0) { |
| res->start += offset; |
| res->end += offset; |
| #ifdef DEBUG |
| printk("Fixup res %d (%lx) of dev %s: %lx -> %lx\n", |
| i, res->flags, pci_name(dev), |
| res->start - offset, res->start); |
| #endif |
| } |
| } |
| |
| /* Call machine specific resource fixup */ |
| if (ppc_md.pcibios_fixup_resources) |
| ppc_md.pcibios_fixup_resources(dev); |
| } |
| DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pcibios_fixup_resources); |
| |
| void pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region, |
| struct resource *res) |
| { |
| unsigned long offset = 0; |
| struct pci_controller *hose = dev->sysdata; |
| |
| if (hose && res->flags & IORESOURCE_IO) |
| offset = (unsigned long)hose->io_base_virt - isa_io_base; |
| else if (hose && res->flags & IORESOURCE_MEM) |
| offset = hose->pci_mem_offset; |
| region->start = res->start - offset; |
| region->end = res->end - offset; |
| } |
| EXPORT_SYMBOL(pcibios_resource_to_bus); |
| |
| void pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res, |
| struct pci_bus_region *region) |
| { |
| unsigned long offset = 0; |
| struct pci_controller *hose = dev->sysdata; |
| |
| if (hose && res->flags & IORESOURCE_IO) |
| offset = (unsigned long)hose->io_base_virt - isa_io_base; |
| else if (hose && res->flags & IORESOURCE_MEM) |
| offset = hose->pci_mem_offset; |
| res->start = region->start + offset; |
| res->end = region->end + offset; |
| } |
| EXPORT_SYMBOL(pcibios_bus_to_resource); |
| |
| /* |
| * We need to avoid collisions with `mirrored' VGA ports |
| * and other strange ISA hardware, so we always want the |
| * addresses to be allocated in the 0x000-0x0ff region |
| * modulo 0x400. |
| * |
| * Why? Because some silly external IO cards only decode |
| * the low 10 bits of the IO address. The 0x00-0xff region |
| * is reserved for motherboard devices that decode all 16 |
| * bits, so it's ok to allocate at, say, 0x2800-0x28ff, |
| * but we want to try to avoid allocating at 0x2900-0x2bff |
| * which might have be mirrored at 0x0100-0x03ff.. |
| */ |
| void pcibios_align_resource(void *data, struct resource *res, unsigned long size, |
| unsigned long align) |
| { |
| struct pci_dev *dev = data; |
| |
| if (res->flags & IORESOURCE_IO) { |
| unsigned long start = res->start; |
| |
| if (size > 0x100) { |
| printk(KERN_ERR "PCI: I/O Region %s/%d too large" |
| " (%ld bytes)\n", pci_name(dev), |
| dev->resource - res, size); |
| } |
| |
| if (start & 0x300) { |
| start = (start + 0x3ff) & ~0x3ff; |
| res->start = start; |
| } |
| } |
| } |
| EXPORT_SYMBOL(pcibios_align_resource); |
| |
| /* |
| * Handle resources of PCI devices. If the world were perfect, we could |
| * just allocate all the resource regions and do nothing more. It isn't. |
| * On the other hand, we cannot just re-allocate all devices, as it would |
| * require us to know lots of host bridge internals. So we attempt to |
| * keep as much of the original configuration as possible, but tweak it |
| * when it's found to be wrong. |
| * |
| * Known BIOS problems we have to work around: |
| * - I/O or memory regions not configured |
| * - regions configured, but not enabled in the command register |
| * - bogus I/O addresses above 64K used |
| * - expansion ROMs left enabled (this may sound harmless, but given |
| * the fact the PCI specs explicitly allow address decoders to be |
| * shared between expansion ROMs and other resource regions, it's |
| * at least dangerous) |
| * |
| * Our solution: |
| * (1) Allocate resources for all buses behind PCI-to-PCI bridges. |
| * This gives us fixed barriers on where we can allocate. |
| * (2) Allocate resources for all enabled devices. If there is |
| * a collision, just mark the resource as unallocated. Also |
| * disable expansion ROMs during this step. |
| * (3) Try to allocate resources for disabled devices. If the |
| * resources were assigned correctly, everything goes well, |
| * if they weren't, they won't disturb allocation of other |
| * resources. |
| * (4) Assign new addresses to resources which were either |
| * not configured at all or misconfigured. If explicitly |
| * requested by the user, configure expansion ROM address |
| * as well. |
| */ |
| |
| static void __init |
| pcibios_allocate_bus_resources(struct list_head *bus_list) |
| { |
| struct pci_bus *bus; |
| int i; |
| struct resource *res, *pr; |
| |
| /* Depth-First Search on bus tree */ |
| list_for_each_entry(bus, bus_list, node) { |
| for (i = 0; i < 4; ++i) { |
| if ((res = bus->resource[i]) == NULL || !res->flags |
| || res->start > res->end) |
| continue; |
| if (bus->parent == NULL) |
| pr = (res->flags & IORESOURCE_IO)? |
| &ioport_resource: &iomem_resource; |
| else { |
| pr = pci_find_parent_resource(bus->self, res); |
| if (pr == res) { |
| /* this happens when the generic PCI |
| * code (wrongly) decides that this |
| * bridge is transparent -- paulus |
| */ |
| continue; |
| } |
| } |
| |
| DBG("PCI: bridge rsrc %lx..%lx (%lx), parent %p\n", |
| res->start, res->end, res->flags, pr); |
| if (pr) { |
| if (request_resource(pr, res) == 0) |
| continue; |
| /* |
| * Must be a conflict with an existing entry. |
| * Move that entry (or entries) under the |
| * bridge resource and try again. |
| */ |
| if (reparent_resources(pr, res) == 0) |
| continue; |
| } |
| printk(KERN_ERR "PCI: Cannot allocate resource region " |
| "%d of PCI bridge %d\n", i, bus->number); |
| if (pci_relocate_bridge_resource(bus, i)) |
| bus->resource[i] = NULL; |
| } |
| pcibios_allocate_bus_resources(&bus->children); |
| } |
| } |
| |
| /* |
| * Reparent resource children of pr that conflict with res |
| * under res, and make res replace those children. |
| */ |
| static int __init |
| reparent_resources(struct resource *parent, struct resource *res) |
| { |
| struct resource *p, **pp; |
| struct resource **firstpp = NULL; |
| |
| for (pp = &parent->child; (p = *pp) != NULL; pp = &p->sibling) { |
| if (p->end < res->start) |
| continue; |
| if (res->end < p->start) |
| break; |
| if (p->start < res->start || p->end > res->end) |
| return -1; /* not completely contained */ |
| if (firstpp == NULL) |
| firstpp = pp; |
| } |
| if (firstpp == NULL) |
| return -1; /* didn't find any conflicting entries? */ |
| res->parent = parent; |
| res->child = *firstpp; |
| res->sibling = *pp; |
| *firstpp = res; |
| *pp = NULL; |
| for (p = res->child; p != NULL; p = p->sibling) { |
| p->parent = res; |
| DBG(KERN_INFO "PCI: reparented %s [%lx..%lx] under %s\n", |
| p->name, p->start, p->end, res->name); |
| } |
| return 0; |
| } |
| |
| /* |
| * A bridge has been allocated a range which is outside the range |
| * of its parent bridge, so it needs to be moved. |
| */ |
| static int __init |
| pci_relocate_bridge_resource(struct pci_bus *bus, int i) |
| { |
| struct resource *res, *pr, *conflict; |
| unsigned long try, size; |
| int j; |
| struct pci_bus *parent = bus->parent; |
| |
| if (parent == NULL) { |
| /* shouldn't ever happen */ |
| printk(KERN_ERR "PCI: can't move host bridge resource\n"); |
| return -1; |
| } |
| res = bus->resource[i]; |
| if (res == NULL) |
| return -1; |
| pr = NULL; |
| for (j = 0; j < 4; j++) { |
| struct resource *r = parent->resource[j]; |
| if (!r) |
| continue; |
| if ((res->flags ^ r->flags) & (IORESOURCE_IO | IORESOURCE_MEM)) |
| continue; |
| if (!((res->flags ^ r->flags) & IORESOURCE_PREFETCH)) { |
| pr = r; |
| break; |
| } |
| if (res->flags & IORESOURCE_PREFETCH) |
| pr = r; |
| } |
| if (pr == NULL) |
| return -1; |
| size = res->end - res->start; |
| if (pr->start > pr->end || size > pr->end - pr->start) |
| return -1; |
| try = pr->end; |
| for (;;) { |
| res->start = try - size; |
| res->end = try; |
| if (probe_resource(bus->parent, pr, res, &conflict) == 0) |
| break; |
| if (conflict->start <= pr->start + size) |
| return -1; |
| try = conflict->start - 1; |
| } |
| if (request_resource(pr, res)) { |
| DBG(KERN_ERR "PCI: huh? couldn't move to %lx..%lx\n", |
| res->start, res->end); |
| return -1; /* "can't happen" */ |
| } |
| update_bridge_base(bus, i); |
| printk(KERN_INFO "PCI: bridge %d resource %d moved to %lx..%lx\n", |
| bus->number, i, res->start, res->end); |
| return 0; |
| } |
| |
| static int __init |
| probe_resource(struct pci_bus *parent, struct resource *pr, |
| struct resource *res, struct resource **conflict) |
| { |
| struct pci_bus *bus; |
| struct pci_dev *dev; |
| struct resource *r; |
| int i; |
| |
| for (r = pr->child; r != NULL; r = r->sibling) { |
| if (r->end >= res->start && res->end >= r->start) { |
| *conflict = r; |
| return 1; |
| } |
| } |
| list_for_each_entry(bus, &parent->children, node) { |
| for (i = 0; i < 4; ++i) { |
| if ((r = bus->resource[i]) == NULL) |
| continue; |
| if (!r->flags || r->start > r->end || r == res) |
| continue; |
| if (pci_find_parent_resource(bus->self, r) != pr) |
| continue; |
| if (r->end >= res->start && res->end >= r->start) { |
| *conflict = r; |
| return 1; |
| } |
| } |
| } |
| list_for_each_entry(dev, &parent->devices, bus_list) { |
| for (i = 0; i < 6; ++i) { |
| r = &dev->resource[i]; |
| if (!r->flags || (r->flags & IORESOURCE_UNSET)) |
| continue; |
| if (pci_find_parent_resource(dev, r) != pr) |
| continue; |
| if (r->end >= res->start && res->end >= r->start) { |
| *conflict = r; |
| return 1; |
| } |
| } |
| } |
| return 0; |
| } |
| |
| static void __init |
| update_bridge_base(struct pci_bus *bus, int i) |
| { |
| struct resource *res = bus->resource[i]; |
| u8 io_base_lo, io_limit_lo; |
| u16 mem_base, mem_limit; |
| u16 cmd; |
| unsigned long start, end, off; |
| struct pci_dev *dev = bus->self; |
| struct pci_controller *hose = dev->sysdata; |
| |
| if (!hose) { |
| printk("update_bridge_base: no hose?\n"); |
| return; |
| } |
| pci_read_config_word(dev, PCI_COMMAND, &cmd); |
| pci_write_config_word(dev, PCI_COMMAND, |
| cmd & ~(PCI_COMMAND_IO | PCI_COMMAND_MEMORY)); |
| if (res->flags & IORESOURCE_IO) { |
| off = (unsigned long) hose->io_base_virt - isa_io_base; |
| start = res->start - off; |
| end = res->end - off; |
| io_base_lo = (start >> 8) & PCI_IO_RANGE_MASK; |
| io_limit_lo = (end >> 8) & PCI_IO_RANGE_MASK; |
| if (end > 0xffff) { |
| pci_write_config_word(dev, PCI_IO_BASE_UPPER16, |
| start >> 16); |
| pci_write_config_word(dev, PCI_IO_LIMIT_UPPER16, |
| end >> 16); |
| io_base_lo |= PCI_IO_RANGE_TYPE_32; |
| } else |
| io_base_lo |= PCI_IO_RANGE_TYPE_16; |
| pci_write_config_byte(dev, PCI_IO_BASE, io_base_lo); |
| pci_write_config_byte(dev, PCI_IO_LIMIT, io_limit_lo); |
| |
| } else if ((res->flags & (IORESOURCE_MEM | IORESOURCE_PREFETCH)) |
| == IORESOURCE_MEM) { |
| off = hose->pci_mem_offset; |
| mem_base = ((res->start - off) >> 16) & PCI_MEMORY_RANGE_MASK; |
| mem_limit = ((res->end - off) >> 16) & PCI_MEMORY_RANGE_MASK; |
| pci_write_config_word(dev, PCI_MEMORY_BASE, mem_base); |
| pci_write_config_word(dev, PCI_MEMORY_LIMIT, mem_limit); |
| |
| } else if ((res->flags & (IORESOURCE_MEM | IORESOURCE_PREFETCH)) |
| == (IORESOURCE_MEM | IORESOURCE_PREFETCH)) { |
| off = hose->pci_mem_offset; |
| mem_base = ((res->start - off) >> 16) & PCI_PREF_RANGE_MASK; |
| mem_limit = ((res->end - off) >> 16) & PCI_PREF_RANGE_MASK; |
| pci_write_config_word(dev, PCI_PREF_MEMORY_BASE, mem_base); |
| pci_write_config_word(dev, PCI_PREF_MEMORY_LIMIT, mem_limit); |
| |
| } else { |
| DBG(KERN_ERR "PCI: ugh, bridge %s res %d has flags=%lx\n", |
| pci_name(dev), i, res->flags); |
| } |
| pci_write_config_word(dev, PCI_COMMAND, cmd); |
| } |
| |
| static inline void alloc_resource(struct pci_dev *dev, int idx) |
| { |
| struct resource *pr, *r = &dev->resource[idx]; |
| |
| DBG("PCI:%s: Resource %d: %08lx-%08lx (f=%lx)\n", |
| pci_name(dev), idx, r->start, r->end, r->flags); |
| pr = pci_find_parent_resource(dev, r); |
| if (!pr || request_resource(pr, r) < 0) { |
| printk(KERN_ERR "PCI: Cannot allocate resource region %d" |
| " of device %s\n", idx, pci_name(dev)); |
| if (pr) |
| DBG("PCI: parent is %p: %08lx-%08lx (f=%lx)\n", |
| pr, pr->start, pr->end, pr->flags); |
| /* We'll assign a new address later */ |
| r->flags |= IORESOURCE_UNSET; |
| r->end -= r->start; |
| r->start = 0; |
| } |
| } |
| |
| static void __init |
| pcibios_allocate_resources(int pass) |
| { |
| struct pci_dev *dev = NULL; |
| int idx, disabled; |
| u16 command; |
| struct resource *r; |
| |
| while ((dev = pci_find_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) { |
| pci_read_config_word(dev, PCI_COMMAND, &command); |
| for (idx = 0; idx < 6; idx++) { |
| r = &dev->resource[idx]; |
| if (r->parent) /* Already allocated */ |
| continue; |
| if (!r->flags || (r->flags & IORESOURCE_UNSET)) |
| continue; /* Not assigned at all */ |
| if (r->flags & IORESOURCE_IO) |
| disabled = !(command & PCI_COMMAND_IO); |
| else |
| disabled = !(command & PCI_COMMAND_MEMORY); |
| if (pass == disabled) |
| alloc_resource(dev, idx); |
| } |
| if (pass) |
| continue; |
| r = &dev->resource[PCI_ROM_RESOURCE]; |
| if (r->flags & IORESOURCE_ROM_ENABLE) { |
| /* Turn the ROM off, leave the resource region, but keep it unregistered. */ |
| u32 reg; |
| DBG("PCI: Switching off ROM of %s\n", pci_name(dev)); |
| r->flags &= ~IORESOURCE_ROM_ENABLE; |
| pci_read_config_dword(dev, dev->rom_base_reg, ®); |
| pci_write_config_dword(dev, dev->rom_base_reg, |
| reg & ~PCI_ROM_ADDRESS_ENABLE); |
| } |
| } |
| } |
| |
| static void __init |
| pcibios_assign_resources(void) |
| { |
| struct pci_dev *dev = NULL; |
| int idx; |
| struct resource *r; |
| |
| while ((dev = pci_find_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) { |
| int class = dev->class >> 8; |
| |
| /* Don't touch classless devices and host bridges */ |
| if (!class || class == PCI_CLASS_BRIDGE_HOST) |
| continue; |
| |
| for (idx = 0; idx < 6; idx++) { |
| r = &dev->resource[idx]; |
| |
| /* |
| * We shall assign a new address to this resource, |
| * either because the BIOS (sic) forgot to do so |
| * or because we have decided the old address was |
| * unusable for some reason. |
| */ |
| if ((r->flags & IORESOURCE_UNSET) && r->end && |
| (!ppc_md.pcibios_enable_device_hook || |
| !ppc_md.pcibios_enable_device_hook(dev, 1))) { |
| r->flags &= ~IORESOURCE_UNSET; |
| pci_assign_resource(dev, idx); |
| } |
| } |
| |
| #if 0 /* don't assign ROMs */ |
| r = &dev->resource[PCI_ROM_RESOURCE]; |
| r->end -= r->start; |
| r->start = 0; |
| if (r->end) |
| pci_assign_resource(dev, PCI_ROM_RESOURCE); |
| #endif |
| } |
| } |
| |
| |
| int |
| pcibios_enable_resources(struct pci_dev *dev, int mask) |
| { |
| u16 cmd, old_cmd; |
| int idx; |
| struct resource *r; |
| |
| pci_read_config_word(dev, PCI_COMMAND, &cmd); |
| old_cmd = cmd; |
| for (idx=0; idx<6; idx++) { |
| /* Only set up the requested stuff */ |
| if (!(mask & (1<<idx))) |
| continue; |
| |
| r = &dev->resource[idx]; |
| if (r->flags & IORESOURCE_UNSET) { |
| printk(KERN_ERR "PCI: Device %s not available because of resource collisions\n", pci_name(dev)); |
| return -EINVAL; |
| } |
| if (r->flags & IORESOURCE_IO) |
| cmd |= PCI_COMMAND_IO; |
| if (r->flags & IORESOURCE_MEM) |
| cmd |= PCI_COMMAND_MEMORY; |
| } |
| if (dev->resource[PCI_ROM_RESOURCE].start) |
| cmd |= PCI_COMMAND_MEMORY; |
| if (cmd != old_cmd) { |
| printk("PCI: Enabling device %s (%04x -> %04x)\n", pci_name(dev), old_cmd, cmd); |
| pci_write_config_word(dev, PCI_COMMAND, cmd); |
| } |
| return 0; |
| } |
| |
| static int next_controller_index; |
| |
| struct pci_controller * __init |
| pcibios_alloc_controller(void) |
| { |
| struct pci_controller *hose; |
| |
| hose = (struct pci_controller *)alloc_bootmem(sizeof(*hose)); |
| memset(hose, 0, sizeof(struct pci_controller)); |
| |
| *hose_tail = hose; |
| hose_tail = &hose->next; |
| |
| hose->index = next_controller_index++; |
| |
| return hose; |
| } |
| |
| #ifdef CONFIG_PPC_OF |
| /* |
| * Functions below are used on OpenFirmware machines. |
| */ |
| static void __openfirmware |
| make_one_node_map(struct device_node* node, u8 pci_bus) |
| { |
| int *bus_range; |
| int len; |
| |
| if (pci_bus >= pci_bus_count) |
| return; |
| bus_range = (int *) get_property(node, "bus-range", &len); |
| if (bus_range == NULL || len < 2 * sizeof(int)) { |
| printk(KERN_WARNING "Can't get bus-range for %s, " |
| "assuming it starts at 0\n", node->full_name); |
| pci_to_OF_bus_map[pci_bus] = 0; |
| } else |
| pci_to_OF_bus_map[pci_bus] = bus_range[0]; |
| |
| for (node=node->child; node != 0;node = node->sibling) { |
| struct pci_dev* dev; |
| unsigned int *class_code, *reg; |
| |
| class_code = (unsigned int *) get_property(node, "class-code", NULL); |
| if (!class_code || ((*class_code >> 8) != PCI_CLASS_BRIDGE_PCI && |
| (*class_code >> 8) != PCI_CLASS_BRIDGE_CARDBUS)) |
| continue; |
| reg = (unsigned int *)get_property(node, "reg", NULL); |
| if (!reg) |
| continue; |
| dev = pci_find_slot(pci_bus, ((reg[0] >> 8) & 0xff)); |
| if (!dev || !dev->subordinate) |
| continue; |
| make_one_node_map(node, dev->subordinate->number); |
| } |
| } |
| |
| void __openfirmware |
| pcibios_make_OF_bus_map(void) |
| { |
| int i; |
| struct pci_controller* hose; |
| u8* of_prop_map; |
| |
| pci_to_OF_bus_map = (u8*)kmalloc(pci_bus_count, GFP_KERNEL); |
| if (!pci_to_OF_bus_map) { |
| printk(KERN_ERR "Can't allocate OF bus map !\n"); |
| return; |
| } |
| |
| /* We fill the bus map with invalid values, that helps |
| * debugging. |
| */ |
| for (i=0; i<pci_bus_count; i++) |
| pci_to_OF_bus_map[i] = 0xff; |
| |
| /* For each hose, we begin searching bridges */ |
| for(hose=hose_head; hose; hose=hose->next) { |
| struct device_node* node; |
| node = (struct device_node *)hose->arch_data; |
| if (!node) |
| continue; |
| make_one_node_map(node, hose->first_busno); |
| } |
| of_prop_map = get_property(find_path_device("/"), "pci-OF-bus-map", NULL); |
| if (of_prop_map) |
| memcpy(of_prop_map, pci_to_OF_bus_map, pci_bus_count); |
| #ifdef DEBUG |
| printk("PCI->OF bus map:\n"); |
| for (i=0; i<pci_bus_count; i++) { |
| if (pci_to_OF_bus_map[i] == 0xff) |
| continue; |
| printk("%d -> %d\n", i, pci_to_OF_bus_map[i]); |
| } |
| #endif |
| } |
| |
| typedef int (*pci_OF_scan_iterator)(struct device_node* node, void* data); |
| |
| static struct device_node* __openfirmware |
| scan_OF_pci_childs(struct device_node* node, pci_OF_scan_iterator filter, void* data) |
| { |
| struct device_node* sub_node; |
| |
| for (; node != 0;node = node->sibling) { |
| unsigned int *class_code; |
| |
| if (filter(node, data)) |
| return node; |
| |
| /* For PCI<->PCI bridges or CardBus bridges, we go down |
| * Note: some OFs create a parent node "multifunc-device" as |
| * a fake root for all functions of a multi-function device, |
| * we go down them as well. |
| */ |
| class_code = (unsigned int *) get_property(node, "class-code", NULL); |
| if ((!class_code || ((*class_code >> 8) != PCI_CLASS_BRIDGE_PCI && |
| (*class_code >> 8) != PCI_CLASS_BRIDGE_CARDBUS)) && |
| strcmp(node->name, "multifunc-device")) |
| continue; |
| sub_node = scan_OF_pci_childs(node->child, filter, data); |
| if (sub_node) |
| return sub_node; |
| } |
| return NULL; |
| } |
| |
| static int |
| scan_OF_pci_childs_iterator(struct device_node* node, void* data) |
| { |
| unsigned int *reg; |
| u8* fdata = (u8*)data; |
| |
| reg = (unsigned int *) get_property(node, "reg", NULL); |
| if (reg && ((reg[0] >> 8) & 0xff) == fdata[1] |
| && ((reg[0] >> 16) & 0xff) == fdata[0]) |
| return 1; |
| return 0; |
| } |
| |
| static struct device_node* __openfirmware |
| scan_OF_childs_for_device(struct device_node* node, u8 bus, u8 dev_fn) |
| { |
| u8 filter_data[2] = {bus, dev_fn}; |
| |
| return scan_OF_pci_childs(node, scan_OF_pci_childs_iterator, filter_data); |
| } |
| |
| /* |
| * Scans the OF tree for a device node matching a PCI device |
| */ |
| struct device_node * |
| pci_busdev_to_OF_node(struct pci_bus *bus, int devfn) |
| { |
| struct pci_controller *hose; |
| struct device_node *node; |
| int busnr; |
| |
| if (!have_of) |
| return NULL; |
| |
| /* Lookup the hose */ |
| busnr = bus->number; |
| hose = pci_bus_to_hose(busnr); |
| if (!hose) |
| return NULL; |
| |
| /* Check it has an OF node associated */ |
| node = (struct device_node *) hose->arch_data; |
| if (!node) |
| return NULL; |
| |
| /* Fixup bus number according to what OF think it is. */ |
| #ifdef CONFIG_PPC_PMAC |
| /* The G5 need a special case here. Basically, we don't remap all |
| * busses on it so we don't create the pci-OF-map. However, we do |
| * remap the AGP bus and so have to deal with it. A future better |
| * fix has to be done by making the remapping per-host and always |
| * filling the pci_to_OF map. --BenH |
| */ |
| if (_machine == _MACH_Pmac && busnr >= 0xf0) |
| busnr -= 0xf0; |
| else |
| #endif |
| if (pci_to_OF_bus_map) |
| busnr = pci_to_OF_bus_map[busnr]; |
| if (busnr == 0xff) |
| return NULL; |
| |
| /* Now, lookup childs of the hose */ |
| return scan_OF_childs_for_device(node->child, busnr, devfn); |
| } |
| |
| struct device_node* |
| pci_device_to_OF_node(struct pci_dev *dev) |
| { |
| return pci_busdev_to_OF_node(dev->bus, dev->devfn); |
| } |
| |
| /* This routine is meant to be used early during boot, when the |
| * PCI bus numbers have not yet been assigned, and you need to |
| * issue PCI config cycles to an OF device. |
| * It could also be used to "fix" RTAS config cycles if you want |
| * to set pci_assign_all_busses to 1 and still use RTAS for PCI |
| * config cycles. |
| */ |
| struct pci_controller* |
| pci_find_hose_for_OF_device(struct device_node* node) |
| { |
| if (!have_of) |
| return NULL; |
| while(node) { |
| struct pci_controller* hose; |
| for (hose=hose_head;hose;hose=hose->next) |
| if (hose->arch_data == node) |
| return hose; |
| node=node->parent; |
| } |
| return NULL; |
| } |
| |
| static int __openfirmware |
| find_OF_pci_device_filter(struct device_node* node, void* data) |
| { |
| return ((void *)node == data); |
| } |
| |
| /* |
| * Returns the PCI device matching a given OF node |
| */ |
| int |
| pci_device_from_OF_node(struct device_node* node, u8* bus, u8* devfn) |
| { |
| unsigned int *reg; |
| struct pci_controller* hose; |
| struct pci_dev* dev = NULL; |
| |
| if (!have_of) |
| return -ENODEV; |
| /* Make sure it's really a PCI device */ |
| hose = pci_find_hose_for_OF_device(node); |
| if (!hose || !hose->arch_data) |
| return -ENODEV; |
| if (!scan_OF_pci_childs(((struct device_node*)hose->arch_data)->child, |
| find_OF_pci_device_filter, (void *)node)) |
| return -ENODEV; |
| reg = (unsigned int *) get_property(node, "reg", NULL); |
| if (!reg) |
| return -ENODEV; |
| *bus = (reg[0] >> 16) & 0xff; |
| *devfn = ((reg[0] >> 8) & 0xff); |
| |
| /* Ok, here we need some tweak. If we have already renumbered |
| * all busses, we can't rely on the OF bus number any more. |
| * the pci_to_OF_bus_map is not enough as several PCI busses |
| * may match the same OF bus number. |
| */ |
| if (!pci_to_OF_bus_map) |
| return 0; |
| while ((dev = pci_find_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) { |
| if (pci_to_OF_bus_map[dev->bus->number] != *bus) |
| continue; |
| if (dev->devfn != *devfn) |
| continue; |
| *bus = dev->bus->number; |
| return 0; |
| } |
| return -ENODEV; |
| } |
| |
| void __init |
| pci_process_bridge_OF_ranges(struct pci_controller *hose, |
| struct device_node *dev, int primary) |
| { |
| static unsigned int static_lc_ranges[256] __initdata; |
| unsigned int *dt_ranges, *lc_ranges, *ranges, *prev; |
| unsigned int size; |
| int rlen = 0, orig_rlen; |
| int memno = 0; |
| struct resource *res; |
| int np, na = prom_n_addr_cells(dev); |
| np = na + 5; |
| |
| /* First we try to merge ranges to fix a problem with some pmacs |
| * that can have more than 3 ranges, fortunately using contiguous |
| * addresses -- BenH |
| */ |
| dt_ranges = (unsigned int *) get_property(dev, "ranges", &rlen); |
| if (!dt_ranges) |
| return; |
| /* Sanity check, though hopefully that never happens */ |
| if (rlen > sizeof(static_lc_ranges)) { |
| printk(KERN_WARNING "OF ranges property too large !\n"); |
| rlen = sizeof(static_lc_ranges); |
| } |
| lc_ranges = static_lc_ranges; |
| memcpy(lc_ranges, dt_ranges, rlen); |
| orig_rlen = rlen; |
| |
| /* Let's work on a copy of the "ranges" property instead of damaging |
| * the device-tree image in memory |
| */ |
| ranges = lc_ranges; |
| prev = NULL; |
| while ((rlen -= np * sizeof(unsigned int)) >= 0) { |
| if (prev) { |
| if (prev[0] == ranges[0] && prev[1] == ranges[1] && |
| (prev[2] + prev[na+4]) == ranges[2] && |
| (prev[na+2] + prev[na+4]) == ranges[na+2]) { |
| prev[na+4] += ranges[na+4]; |
| ranges[0] = 0; |
| ranges += np; |
| continue; |
| } |
| } |
| prev = ranges; |
| ranges += np; |
| } |
| |
| /* |
| * The ranges property is laid out as an array of elements, |
| * each of which comprises: |
| * cells 0 - 2: a PCI address |
| * cells 3 or 3+4: a CPU physical address |
| * (size depending on dev->n_addr_cells) |
| * cells 4+5 or 5+6: the size of the range |
| */ |
| ranges = lc_ranges; |
| rlen = orig_rlen; |
| while (ranges && (rlen -= np * sizeof(unsigned int)) >= 0) { |
| res = NULL; |
| size = ranges[na+4]; |
| switch (ranges[0] >> 24) { |
| case 1: /* I/O space */ |
| if (ranges[2] != 0) |
| break; |
| hose->io_base_phys = ranges[na+2]; |
| /* limit I/O space to 16MB */ |
| if (size > 0x01000000) |
| size = 0x01000000; |
| hose->io_base_virt = ioremap(ranges[na+2], size); |
| if (primary) |
| isa_io_base = (unsigned long) hose->io_base_virt; |
| res = &hose->io_resource; |
| res->flags = IORESOURCE_IO; |
| res->start = ranges[2]; |
| break; |
| case 2: /* memory space */ |
| memno = 0; |
| if (ranges[1] == 0 && ranges[2] == 0 |
| && ranges[na+4] <= (16 << 20)) { |
| /* 1st 16MB, i.e. ISA memory area */ |
| if (primary) |
| isa_mem_base = ranges[na+2]; |
| memno = 1; |
| } |
| while (memno < 3 && hose->mem_resources[memno].flags) |
| ++memno; |
| if (memno == 0) |
| hose->pci_mem_offset = ranges[na+2] - ranges[2]; |
| if (memno < 3) { |
| res = &hose->mem_resources[memno]; |
| res->flags = IORESOURCE_MEM; |
| res->start = ranges[na+2]; |
| } |
| break; |
| } |
| if (res != NULL) { |
| res->name = dev->full_name; |
| res->end = res->start + size - 1; |
| res->parent = NULL; |
| res->sibling = NULL; |
| res->child = NULL; |
| } |
| ranges += np; |
| } |
| } |
| |
| /* We create the "pci-OF-bus-map" property now so it appears in the |
| * /proc device tree |
| */ |
| void __init |
| pci_create_OF_bus_map(void) |
| { |
| struct property* of_prop; |
| |
| of_prop = (struct property*) alloc_bootmem(sizeof(struct property) + 256); |
| if (of_prop && find_path_device("/")) { |
| memset(of_prop, -1, sizeof(struct property) + 256); |
| of_prop->name = "pci-OF-bus-map"; |
| of_prop->length = 256; |
| of_prop->value = (unsigned char *)&of_prop[1]; |
| prom_add_property(find_path_device("/"), of_prop); |
| } |
| } |
| |
| static ssize_t pci_show_devspec(struct device *dev, struct device_attribute *attr, char *buf) |
| { |
| struct pci_dev *pdev; |
| struct device_node *np; |
| |
| pdev = to_pci_dev (dev); |
| np = pci_device_to_OF_node(pdev); |
| if (np == NULL || np->full_name == NULL) |
| return 0; |
| return sprintf(buf, "%s", np->full_name); |
| } |
| static DEVICE_ATTR(devspec, S_IRUGO, pci_show_devspec, NULL); |
| |
| #endif /* CONFIG_PPC_OF */ |
| |
| /* Add sysfs properties */ |
| void pcibios_add_platform_entries(struct pci_dev *pdev) |
| { |
| #ifdef CONFIG_PPC_OF |
| device_create_file(&pdev->dev, &dev_attr_devspec); |
| #endif /* CONFIG_PPC_OF */ |
| } |
| |
| |
| #ifdef CONFIG_PPC_PMAC |
| /* |
| * This set of routines checks for PCI<->PCI bridges that have closed |
| * IO resources and have child devices. It tries to re-open an IO |
| * window on them. |
| * |
| * This is a _temporary_ fix to workaround a problem with Apple's OF |
| * closing IO windows on P2P bridges when the OF drivers of cards |
| * below this bridge don't claim any IO range (typically ATI or |
| * Adaptec). |
| * |
| * A more complete fix would be to use drivers/pci/setup-bus.c, which |
| * involves a working pcibios_fixup_pbus_ranges(), some more care about |
| * ordering when creating the host bus resources, and maybe a few more |
| * minor tweaks |
| */ |
| |
| /* Initialize bridges with base/limit values we have collected */ |
| static void __init |
| do_update_p2p_io_resource(struct pci_bus *bus, int enable_vga) |
| { |
| struct pci_dev *bridge = bus->self; |
| struct pci_controller* hose = (struct pci_controller *)bridge->sysdata; |
| u32 l; |
| u16 w; |
| struct resource res; |
| |
| if (bus->resource[0] == NULL) |
| return; |
| res = *(bus->resource[0]); |
| |
| DBG("Remapping Bus %d, bridge: %s\n", bus->number, pci_name(bridge)); |
| res.start -= ((unsigned long) hose->io_base_virt - isa_io_base); |
| res.end -= ((unsigned long) hose->io_base_virt - isa_io_base); |
| DBG(" IO window: %08lx-%08lx\n", res.start, res.end); |
| |
| /* Set up the top and bottom of the PCI I/O segment for this bus. */ |
| pci_read_config_dword(bridge, PCI_IO_BASE, &l); |
| l &= 0xffff000f; |
| l |= (res.start >> 8) & 0x00f0; |
| l |= res.end & 0xf000; |
| pci_write_config_dword(bridge, PCI_IO_BASE, l); |
| |
| if ((l & PCI_IO_RANGE_TYPE_MASK) == PCI_IO_RANGE_TYPE_32) { |
| l = (res.start >> 16) | (res.end & 0xffff0000); |
| pci_write_config_dword(bridge, PCI_IO_BASE_UPPER16, l); |
| } |
| |
| pci_read_config_word(bridge, PCI_COMMAND, &w); |
| w |= PCI_COMMAND_IO; |
| pci_write_config_word(bridge, PCI_COMMAND, w); |
| |
| #if 0 /* Enabling this causes XFree 4.2.0 to hang during PCI probe */ |
| if (enable_vga) { |
| pci_read_config_word(bridge, PCI_BRIDGE_CONTROL, &w); |
| w |= PCI_BRIDGE_CTL_VGA; |
| pci_write_config_word(bridge, PCI_BRIDGE_CONTROL, w); |
| } |
| #endif |
| } |
| |
| /* This function is pretty basic and actually quite broken for the |
| * general case, it's enough for us right now though. It's supposed |
| * to tell us if we need to open an IO range at all or not and what |
| * size. |
| */ |
| static int __init |
| check_for_io_childs(struct pci_bus *bus, struct resource* res, int *found_vga) |
| { |
| struct pci_dev *dev; |
| int i; |
| int rc = 0; |
| |
| #define push_end(res, size) do { unsigned long __sz = (size) ; \ |
| res->end = ((res->end + __sz) / (__sz + 1)) * (__sz + 1) + __sz; \ |
| } while (0) |
| |
| list_for_each_entry(dev, &bus->devices, bus_list) { |
| u16 class = dev->class >> 8; |
| |
| if (class == PCI_CLASS_DISPLAY_VGA || |
| class == PCI_CLASS_NOT_DEFINED_VGA) |
| *found_vga = 1; |
| if (class >> 8 == PCI_BASE_CLASS_BRIDGE && dev->subordinate) |
| rc |= check_for_io_childs(dev->subordinate, res, found_vga); |
| if (class == PCI_CLASS_BRIDGE_CARDBUS) |
| push_end(res, 0xfff); |
| |
| for (i=0; i<PCI_NUM_RESOURCES; i++) { |
| struct resource *r; |
| unsigned long r_size; |
| |
| if (dev->class >> 8 == PCI_CLASS_BRIDGE_PCI |
| && i >= PCI_BRIDGE_RESOURCES) |
| continue; |
| r = &dev->resource[i]; |
| r_size = r->end - r->start; |
| if (r_size < 0xfff) |
| r_size = 0xfff; |
| if (r->flags & IORESOURCE_IO && (r_size) != 0) { |
| rc = 1; |
| push_end(res, r_size); |
| } |
| } |
| } |
| |
| return rc; |
| } |
| |
| /* Here we scan all P2P bridges of a given level that have a closed |
| * IO window. Note that the test for the presence of a VGA card should |
| * be improved to take into account already configured P2P bridges, |
| * currently, we don't see them and might end up configuring 2 bridges |
| * with VGA pass through enabled |
| */ |
| static void __init |
| do_fixup_p2p_level(struct pci_bus *bus) |
| { |
| struct pci_bus *b; |
| int i, parent_io; |
| int has_vga = 0; |
| |
| for (parent_io=0; parent_io<4; parent_io++) |
| if (bus->resource[parent_io] |
| && bus->resource[parent_io]->flags & IORESOURCE_IO) |
| break; |
| if (parent_io >= 4) |
| return; |
| |
| list_for_each_entry(b, &bus->children, node) { |
| struct pci_dev *d = b->self; |
| struct pci_controller* hose = (struct pci_controller *)d->sysdata; |
| struct resource *res = b->resource[0]; |
| struct resource tmp_res; |
| unsigned long max; |
| int found_vga = 0; |
| |
| memset(&tmp_res, 0, sizeof(tmp_res)); |
| tmp_res.start = bus->resource[parent_io]->start; |
| |
| /* We don't let low addresses go through that closed P2P bridge, well, |
| * that may not be necessary but I feel safer that way |
| */ |
| if (tmp_res.start == 0) |
| tmp_res.start = 0x1000; |
| |
| if (!list_empty(&b->devices) && res && res->flags == 0 && |
| res != bus->resource[parent_io] && |
| (d->class >> 8) == PCI_CLASS_BRIDGE_PCI && |
| check_for_io_childs(b, &tmp_res, &found_vga)) { |
| u8 io_base_lo; |
| |
| printk(KERN_INFO "Fixing up IO bus %s\n", b->name); |
| |
| if (found_vga) { |
| if (has_vga) { |
| printk(KERN_WARNING "Skipping VGA, already active" |
| " on bus segment\n"); |
| found_vga = 0; |
| } else |
| has_vga = 1; |
| } |
| pci_read_config_byte(d, PCI_IO_BASE, &io_base_lo); |
| |
| if ((io_base_lo & PCI_IO_RANGE_TYPE_MASK) == PCI_IO_RANGE_TYPE_32) |
| max = ((unsigned long) hose->io_base_virt |
| - isa_io_base) + 0xffffffff; |
| else |
| max = ((unsigned long) hose->io_base_virt |
| - isa_io_base) + 0xffff; |
| |
| *res = tmp_res; |
| res->flags = IORESOURCE_IO; |
| res->name = b->name; |
| |
| /* Find a resource in the parent where we can allocate */ |
| for (i = 0 ; i < 4; i++) { |
| struct resource *r = bus->resource[i]; |
| if (!r) |
| continue; |
| if ((r->flags & IORESOURCE_IO) == 0) |
| continue; |
| DBG("Trying to allocate from %08lx, size %08lx from parent" |
| " res %d: %08lx -> %08lx\n", |
| res->start, res->end, i, r->start, r->end); |
| |
| if (allocate_resource(r, res, res->end + 1, res->start, max, |
| res->end + 1, NULL, NULL) < 0) { |
| DBG("Failed !\n"); |
| continue; |
| } |
| do_update_p2p_io_resource(b, found_vga); |
| break; |
| } |
| } |
| do_fixup_p2p_level(b); |
| } |
| } |
| |
| static void |
| pcibios_fixup_p2p_bridges(void) |
| { |
| struct pci_bus *b; |
| |
| list_for_each_entry(b, &pci_root_buses, node) |
| do_fixup_p2p_level(b); |
| } |
| |
| #endif /* CONFIG_PPC_PMAC */ |
| |
| static int __init |
| pcibios_init(void) |
| { |
| struct pci_controller *hose; |
| struct pci_bus *bus; |
| int next_busno; |
| |
| printk(KERN_INFO "PCI: Probing PCI hardware\n"); |
| |
| /* Scan all of the recorded PCI controllers. */ |
| for (next_busno = 0, hose = hose_head; hose; hose = hose->next) { |
| if (pci_assign_all_busses) |
| hose->first_busno = next_busno; |
| hose->last_busno = 0xff; |
| bus = pci_scan_bus(hose->first_busno, hose->ops, hose); |
| hose->last_busno = bus->subordinate; |
| if (pci_assign_all_busses || next_busno <= hose->last_busno) |
| next_busno = hose->last_busno + pcibios_assign_bus_offset; |
| } |
| pci_bus_count = next_busno; |
| |
| /* OpenFirmware based machines need a map of OF bus |
| * numbers vs. kernel bus numbers since we may have to |
| * remap them. |
| */ |
| if (pci_assign_all_busses && have_of) |
| pcibios_make_OF_bus_map(); |
| |
| /* Do machine dependent PCI interrupt routing */ |
| if (ppc_md.pci_swizzle && ppc_md.pci_map_irq) |
| pci_fixup_irqs(ppc_md.pci_swizzle, ppc_md.pci_map_irq); |
| |
| /* Call machine dependent fixup */ |
| if (ppc_md.pcibios_fixup) |
| ppc_md.pcibios_fixup(); |
| |
| /* Allocate and assign resources */ |
| pcibios_allocate_bus_resources(&pci_root_buses); |
| pcibios_allocate_resources(0); |
| pcibios_allocate_resources(1); |
| #ifdef CONFIG_PPC_PMAC |
| pcibios_fixup_p2p_bridges(); |
| #endif /* CONFIG_PPC_PMAC */ |
| pcibios_assign_resources(); |
| |
| /* Call machine dependent post-init code */ |
| if (ppc_md.pcibios_after_init) |
| ppc_md.pcibios_after_init(); |
| |
| return 0; |
| } |
| |
| subsys_initcall(pcibios_init); |
| |
| unsigned char __init |
| common_swizzle(struct pci_dev *dev, unsigned char *pinp) |
| { |
| struct pci_controller *hose = dev->sysdata; |
| |
| if (dev->bus->number != hose->first_busno) { |
| u8 pin = *pinp; |
| do { |
| pin = bridge_swizzle(pin, PCI_SLOT(dev->devfn)); |
| /* Move up the chain of bridges. */ |
| dev = dev->bus->self; |
| } while (dev->bus->self); |
| *pinp = pin; |
| |
| /* The slot is the idsel of the last bridge. */ |
| } |
| return PCI_SLOT(dev->devfn); |
| } |
| |
| unsigned long resource_fixup(struct pci_dev * dev, struct resource * res, |
| unsigned long start, unsigned long size) |
| { |
| return start; |
| } |
| |
| void __init pcibios_fixup_bus(struct pci_bus *bus) |
| { |
| struct pci_controller *hose = (struct pci_controller *) bus->sysdata; |
| unsigned long io_offset; |
| struct resource *res; |
| int i; |
| |
| io_offset = (unsigned long)hose->io_base_virt - isa_io_base; |
| if (bus->parent == NULL) { |
| /* This is a host bridge - fill in its resources */ |
| hose->bus = bus; |
| |
| bus->resource[0] = res = &hose->io_resource; |
| if (!res->flags) { |
| if (io_offset) |
| printk(KERN_ERR "I/O resource not set for host" |
| " bridge %d\n", hose->index); |
| res->start = 0; |
| res->end = IO_SPACE_LIMIT; |
| res->flags = IORESOURCE_IO; |
| } |
| res->start += io_offset; |
| res->end += io_offset; |
| |
| for (i = 0; i < 3; ++i) { |
| res = &hose->mem_resources[i]; |
| if (!res->flags) { |
| if (i > 0) |
| continue; |
| printk(KERN_ERR "Memory resource not set for " |
| "host bridge %d\n", hose->index); |
| res->start = hose->pci_mem_offset; |
| res->end = ~0U; |
| res->flags = IORESOURCE_MEM; |
| } |
| bus->resource[i+1] = res; |
| } |
| } else { |
| /* This is a subordinate bridge */ |
| pci_read_bridge_bases(bus); |
| |
| for (i = 0; i < 4; ++i) { |
| if ((res = bus->resource[i]) == NULL) |
| continue; |
| if (!res->flags) |
| continue; |
| if (io_offset && (res->flags & IORESOURCE_IO)) { |
| res->start += io_offset; |
| res->end += io_offset; |
| } else if (hose->pci_mem_offset |
| && (res->flags & IORESOURCE_MEM)) { |
| res->start += hose->pci_mem_offset; |
| res->end += hose->pci_mem_offset; |
| } |
| } |
| } |
| |
| if (ppc_md.pcibios_fixup_bus) |
| ppc_md.pcibios_fixup_bus(bus); |
| } |
| |
| char __init *pcibios_setup(char *str) |
| { |
| return str; |
| } |
| |
| /* the next one is stolen from the alpha port... */ |
| void __init |
| pcibios_update_irq(struct pci_dev *dev, int irq) |
| { |
| pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq); |
| /* XXX FIXME - update OF device tree node interrupt property */ |
| } |
| |
| int pcibios_enable_device(struct pci_dev *dev, int mask) |
| { |
| u16 cmd, old_cmd; |
| int idx; |
| struct resource *r; |
| |
| if (ppc_md.pcibios_enable_device_hook) |
| if (ppc_md.pcibios_enable_device_hook(dev, 0)) |
| return -EINVAL; |
| |
| pci_read_config_word(dev, PCI_COMMAND, &cmd); |
| old_cmd = cmd; |
| for (idx=0; idx<6; idx++) { |
| r = &dev->resource[idx]; |
| if (r->flags & IORESOURCE_UNSET) { |
| printk(KERN_ERR "PCI: Device %s not available because of resource collisions\n", pci_name(dev)); |
| return -EINVAL; |
| } |
| if (r->flags & IORESOURCE_IO) |
| cmd |= PCI_COMMAND_IO; |
| if (r->flags & IORESOURCE_MEM) |
| cmd |= PCI_COMMAND_MEMORY; |
| } |
| if (cmd != old_cmd) { |
| printk("PCI: Enabling device %s (%04x -> %04x)\n", |
| pci_name(dev), old_cmd, cmd); |
| pci_write_config_word(dev, PCI_COMMAND, cmd); |
| } |
| return 0; |
| } |
| |
| struct pci_controller* |
| pci_bus_to_hose(int bus) |
| { |
| struct pci_controller* hose = hose_head; |
| |
| for (; hose; hose = hose->next) |
| if (bus >= hose->first_busno && bus <= hose->last_busno) |
| return hose; |
| return NULL; |
| } |
| |
| void __iomem * |
| pci_bus_io_base(unsigned int bus) |
| { |
| struct pci_controller *hose; |
| |
| hose = pci_bus_to_hose(bus); |
| if (!hose) |
| return NULL; |
| return hose->io_base_virt; |
| } |
| |
| unsigned long |
| pci_bus_io_base_phys(unsigned int bus) |
| { |
| struct pci_controller *hose; |
| |
| hose = pci_bus_to_hose(bus); |
| if (!hose) |
| return 0; |
| return hose->io_base_phys; |
| } |
| |
| unsigned long |
| pci_bus_mem_base_phys(unsigned int bus) |
| { |
| struct pci_controller *hose; |
| |
| hose = pci_bus_to_hose(bus); |
| if (!hose) |
| return 0; |
| return hose->pci_mem_offset; |
| } |
| |
| unsigned long |
| pci_resource_to_bus(struct pci_dev *pdev, struct resource *res) |
| { |
| /* Hack alert again ! See comments in chrp_pci.c |
| */ |
| struct pci_controller* hose = |
| (struct pci_controller *)pdev->sysdata; |
| if (hose && res->flags & IORESOURCE_MEM) |
| return res->start - hose->pci_mem_offset; |
| /* We may want to do something with IOs here... */ |
| return res->start; |
| } |
| |
| |
| static struct resource *__pci_mmap_make_offset(struct pci_dev *dev, |
| unsigned long *offset, |
| enum pci_mmap_state mmap_state) |
| { |
| struct pci_controller *hose = pci_bus_to_hose(dev->bus->number); |
| unsigned long io_offset = 0; |
| int i, res_bit; |
| |
| if (hose == 0) |
| return NULL; /* should never happen */ |
| |
| /* If memory, add on the PCI bridge address offset */ |
| if (mmap_state == pci_mmap_mem) { |
| *offset += hose->pci_mem_offset; |
| res_bit = IORESOURCE_MEM; |
| } else { |
| io_offset = hose->io_base_virt - ___IO_BASE; |
| *offset += io_offset; |
| res_bit = IORESOURCE_IO; |
| } |
| |
| /* |
| * Check that the offset requested corresponds to one of the |
| * resources of the device. |
| */ |
| for (i = 0; i <= PCI_ROM_RESOURCE; i++) { |
| struct resource *rp = &dev->resource[i]; |
| int flags = rp->flags; |
| |
| /* treat ROM as memory (should be already) */ |
| if (i == PCI_ROM_RESOURCE) |
| flags |= IORESOURCE_MEM; |
| |
| /* Active and same type? */ |
| if ((flags & res_bit) == 0) |
| continue; |
| |
| /* In the range of this resource? */ |
| if (*offset < (rp->start & PAGE_MASK) || *offset > rp->end) |
| continue; |
| |
| /* found it! construct the final physical address */ |
| if (mmap_state == pci_mmap_io) |
| *offset += hose->io_base_phys - io_offset; |
| return rp; |
| } |
| |
| return NULL; |
| } |
| |
| /* |
| * Set vm_page_prot of VMA, as appropriate for this architecture, for a pci |
| * device mapping. |
| */ |
| static pgprot_t __pci_mmap_set_pgprot(struct pci_dev *dev, struct resource *rp, |
| pgprot_t protection, |
| enum pci_mmap_state mmap_state, |
| int write_combine) |
| { |
| unsigned long prot = pgprot_val(protection); |
| |
| /* Write combine is always 0 on non-memory space mappings. On |
| * memory space, if the user didn't pass 1, we check for a |
| * "prefetchable" resource. This is a bit hackish, but we use |
| * this to workaround the inability of /sysfs to provide a write |
| * combine bit |
| */ |
| if (mmap_state != pci_mmap_mem) |
| write_combine = 0; |
| else if (write_combine == 0) { |
| if (rp->flags & IORESOURCE_PREFETCH) |
| write_combine = 1; |
| } |
| |
| /* XXX would be nice to have a way to ask for write-through */ |
| prot |= _PAGE_NO_CACHE; |
| if (write_combine) |
| prot &= ~_PAGE_GUARDED; |
| else |
| prot |= _PAGE_GUARDED; |
| |
| printk("PCI map for %s:%lx, prot: %lx\n", pci_name(dev), rp->start, |
| prot); |
| |
| return __pgprot(prot); |
| } |
| |
| /* |
| * This one is used by /dev/mem and fbdev who have no clue about the |
| * PCI device, it tries to find the PCI device first and calls the |
| * above routine |
| */ |
| pgprot_t pci_phys_mem_access_prot(struct file *file, |
| unsigned long offset, |
| unsigned long size, |
| pgprot_t protection) |
| { |
| struct pci_dev *pdev = NULL; |
| struct resource *found = NULL; |
| unsigned long prot = pgprot_val(protection); |
| int i; |
| |
| if (page_is_ram(offset >> PAGE_SHIFT)) |
| return prot; |
| |
| prot |= _PAGE_NO_CACHE | _PAGE_GUARDED; |
| |
| for_each_pci_dev(pdev) { |
| for (i = 0; i <= PCI_ROM_RESOURCE; i++) { |
| struct resource *rp = &pdev->resource[i]; |
| int flags = rp->flags; |
| |
| /* Active and same type? */ |
| if ((flags & IORESOURCE_MEM) == 0) |
| continue; |
| /* In the range of this resource? */ |
| if (offset < (rp->start & PAGE_MASK) || |
| offset > rp->end) |
| continue; |
| found = rp; |
| break; |
| } |
| if (found) |
| break; |
| } |
| if (found) { |
| if (found->flags & IORESOURCE_PREFETCH) |
| prot &= ~_PAGE_GUARDED; |
| pci_dev_put(pdev); |
| } |
| |
| DBG("non-PCI map for %lx, prot: %lx\n", offset, prot); |
| |
| return __pgprot(prot); |
| } |
| |
| |
| /* |
| * Perform the actual remap of the pages for a PCI device mapping, as |
| * appropriate for this architecture. The region in the process to map |
| * is described by vm_start and vm_end members of VMA, the base physical |
| * address is found in vm_pgoff. |
| * The pci device structure is provided so that architectures may make mapping |
| * decisions on a per-device or per-bus basis. |
| * |
| * Returns a negative error code on failure, zero on success. |
| */ |
| int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma, |
| enum pci_mmap_state mmap_state, |
| int write_combine) |
| { |
| unsigned long offset = vma->vm_pgoff << PAGE_SHIFT; |
| struct resource *rp; |
| int ret; |
| |
| rp = __pci_mmap_make_offset(dev, &offset, mmap_state); |
| if (rp == NULL) |
| return -EINVAL; |
| |
| vma->vm_pgoff = offset >> PAGE_SHIFT; |
| vma->vm_flags |= VM_SHM | VM_LOCKED | VM_IO; |
| vma->vm_page_prot = __pci_mmap_set_pgprot(dev, rp, |
| vma->vm_page_prot, |
| mmap_state, write_combine); |
| |
| ret = remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff, |
| vma->vm_end - vma->vm_start, vma->vm_page_prot); |
| |
| return ret; |
| } |
| |
| /* Obsolete functions. Should be removed once the symbios driver |
| * is fixed |
| */ |
| unsigned long |
| phys_to_bus(unsigned long pa) |
| { |
| struct pci_controller *hose; |
| int i; |
| |
| for (hose = hose_head; hose; hose = hose->next) { |
| for (i = 0; i < 3; ++i) { |
| if (pa >= hose->mem_resources[i].start |
| && pa <= hose->mem_resources[i].end) { |
| /* |
| * XXX the hose->pci_mem_offset really |
| * only applies to mem_resources[0]. |
| * We need a way to store an offset for |
| * the others. -- paulus |
| */ |
| if (i == 0) |
| pa -= hose->pci_mem_offset; |
| return pa; |
| } |
| } |
| } |
| /* hmmm, didn't find it */ |
| return 0; |
| } |
| |
| unsigned long |
| pci_phys_to_bus(unsigned long pa, int busnr) |
| { |
| struct pci_controller* hose = pci_bus_to_hose(busnr); |
| if (!hose) |
| return pa; |
| return pa - hose->pci_mem_offset; |
| } |
| |
| unsigned long |
| pci_bus_to_phys(unsigned int ba, int busnr) |
| { |
| struct pci_controller* hose = pci_bus_to_hose(busnr); |
| if (!hose) |
| return ba; |
| return ba + hose->pci_mem_offset; |
| } |
| |
| /* Provide information on locations of various I/O regions in physical |
| * memory. Do this on a per-card basis so that we choose the right |
| * root bridge. |
| * Note that the returned IO or memory base is a physical address |
| */ |
| |
| long sys_pciconfig_iobase(long which, unsigned long bus, unsigned long devfn) |
| { |
| struct pci_controller* hose; |
| long result = -EOPNOTSUPP; |
| |
| /* Argh ! Please forgive me for that hack, but that's the |
| * simplest way to get existing XFree to not lockup on some |
| * G5 machines... So when something asks for bus 0 io base |
| * (bus 0 is HT root), we return the AGP one instead. |
| */ |
| #ifdef CONFIG_PPC_PMAC |
| if (_machine == _MACH_Pmac && machine_is_compatible("MacRISC4")) |
| if (bus == 0) |
| bus = 0xf0; |
| #endif /* CONFIG_PPC_PMAC */ |
| |
| hose = pci_bus_to_hose(bus); |
| if (!hose) |
| return -ENODEV; |
| |
| switch (which) { |
| case IOBASE_BRIDGE_NUMBER: |
| return (long)hose->first_busno; |
| case IOBASE_MEMORY: |
| return (long)hose->pci_mem_offset; |
| case IOBASE_IO: |
| return (long)hose->io_base_phys; |
| case IOBASE_ISA_IO: |
| return (long)isa_io_base; |
| case IOBASE_ISA_MEM: |
| return (long)isa_mem_base; |
| } |
| |
| return result; |
| } |
| |
| void pci_resource_to_user(const struct pci_dev *dev, int bar, |
| const struct resource *rsrc, |
| u64 *start, u64 *end) |
| { |
| struct pci_controller *hose = pci_bus_to_hose(dev->bus->number); |
| unsigned long offset = 0; |
| |
| if (hose == NULL) |
| return; |
| |
| if (rsrc->flags & IORESOURCE_IO) |
| offset = ___IO_BASE - hose->io_base_virt + hose->io_base_phys; |
| |
| *start = rsrc->start + offset; |
| *end = rsrc->end + offset; |
| } |
| |
| void __init |
| pci_init_resource(struct resource *res, unsigned long start, unsigned long end, |
| int flags, char *name) |
| { |
| res->start = start; |
| res->end = end; |
| res->flags = flags; |
| res->name = name; |
| res->parent = NULL; |
| res->sibling = NULL; |
| res->child = NULL; |
| } |
| |
| void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max) |
| { |
| unsigned long start = pci_resource_start(dev, bar); |
| unsigned long len = pci_resource_len(dev, bar); |
| unsigned long flags = pci_resource_flags(dev, bar); |
| |
| if (!len) |
| return NULL; |
| if (max && len > max) |
| len = max; |
| if (flags & IORESOURCE_IO) |
| return ioport_map(start, len); |
| if (flags & IORESOURCE_MEM) |
| /* Not checking IORESOURCE_CACHEABLE because PPC does |
| * not currently distinguish between ioremap and |
| * ioremap_nocache. |
| */ |
| return ioremap(start, len); |
| /* What? */ |
| return NULL; |
| } |
| |
| void pci_iounmap(struct pci_dev *dev, void __iomem *addr) |
| { |
| /* Nothing to do */ |
| } |
| EXPORT_SYMBOL(pci_iomap); |
| EXPORT_SYMBOL(pci_iounmap); |
| |
| |
| /* |
| * Null PCI config access functions, for the case when we can't |
| * find a hose. |
| */ |
| #define NULL_PCI_OP(rw, size, type) \ |
| static int \ |
| null_##rw##_config_##size(struct pci_dev *dev, int offset, type val) \ |
| { \ |
| return PCIBIOS_DEVICE_NOT_FOUND; \ |
| } |
| |
| static int |
| null_read_config(struct pci_bus *bus, unsigned int devfn, int offset, |
| int len, u32 *val) |
| { |
| return PCIBIOS_DEVICE_NOT_FOUND; |
| } |
| |
| static int |
| null_write_config(struct pci_bus *bus, unsigned int devfn, int offset, |
| int len, u32 val) |
| { |
| return PCIBIOS_DEVICE_NOT_FOUND; |
| } |
| |
| static struct pci_ops null_pci_ops = |
| { |
| null_read_config, |
| null_write_config |
| }; |
| |
| /* |
| * These functions are used early on before PCI scanning is done |
| * and all of the pci_dev and pci_bus structures have been created. |
| */ |
| static struct pci_bus * |
| fake_pci_bus(struct pci_controller *hose, int busnr) |
| { |
| static struct pci_bus bus; |
| |
| if (hose == 0) { |
| hose = pci_bus_to_hose(busnr); |
| if (hose == 0) |
| printk(KERN_ERR "Can't find hose for PCI bus %d!\n", busnr); |
| } |
| bus.number = busnr; |
| bus.sysdata = hose; |
| bus.ops = hose? hose->ops: &null_pci_ops; |
| return &bus; |
| } |
| |
| #define EARLY_PCI_OP(rw, size, type) \ |
| int early_##rw##_config_##size(struct pci_controller *hose, int bus, \ |
| int devfn, int offset, type value) \ |
| { \ |
| return pci_bus_##rw##_config_##size(fake_pci_bus(hose, bus), \ |
| devfn, offset, value); \ |
| } |
| |
| EARLY_PCI_OP(read, byte, u8 *) |
| EARLY_PCI_OP(read, word, u16 *) |
| EARLY_PCI_OP(read, dword, u32 *) |
| EARLY_PCI_OP(write, byte, u8) |
| EARLY_PCI_OP(write, word, u16) |
| EARLY_PCI_OP(write, dword, u32) |