| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * linux/arch/arm/mach-sa1100/neponset.c |
| */ |
| #include <linux/err.h> |
| #include <linux/gpio/driver.h> |
| #include <linux/gpio/gpio-reg.h> |
| #include <linux/gpio/machine.h> |
| #include <linux/init.h> |
| #include <linux/ioport.h> |
| #include <linux/irq.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/platform_data/sa11x0-serial.h> |
| #include <linux/platform_device.h> |
| #include <linux/pm.h> |
| #include <linux/serial_core.h> |
| #include <linux/slab.h> |
| #include <linux/smc91x.h> |
| |
| #include <asm/mach-types.h> |
| #include <asm/mach/map.h> |
| #include <asm/hardware/sa1111.h> |
| #include <asm/sizes.h> |
| |
| #include <mach/hardware.h> |
| #include <mach/assabet.h> |
| #include <mach/neponset.h> |
| #include <mach/irqs.h> |
| |
| #define NEP_IRQ_SMC91X 0 |
| #define NEP_IRQ_USAR 1 |
| #define NEP_IRQ_SA1111 2 |
| #define NEP_IRQ_NR 3 |
| |
| #define WHOAMI 0x00 |
| #define LEDS 0x10 |
| #define SWPK 0x20 |
| #define IRR 0x24 |
| #define KP_Y_IN 0x80 |
| #define KP_X_OUT 0x90 |
| #define NCR_0 0xa0 |
| #define MDM_CTL_0 0xb0 |
| #define MDM_CTL_1 0xb4 |
| #define AUD_CTL 0xc0 |
| |
| #define IRR_ETHERNET (1 << 0) |
| #define IRR_USAR (1 << 1) |
| #define IRR_SA1111 (1 << 2) |
| |
| #define NCR_NGPIO 7 |
| |
| #define MDM_CTL0_RTS1 (1 << 0) |
| #define MDM_CTL0_DTR1 (1 << 1) |
| #define MDM_CTL0_RTS2 (1 << 2) |
| #define MDM_CTL0_DTR2 (1 << 3) |
| #define MDM_CTL0_NGPIO 4 |
| |
| #define MDM_CTL1_CTS1 (1 << 0) |
| #define MDM_CTL1_DSR1 (1 << 1) |
| #define MDM_CTL1_DCD1 (1 << 2) |
| #define MDM_CTL1_CTS2 (1 << 3) |
| #define MDM_CTL1_DSR2 (1 << 4) |
| #define MDM_CTL1_DCD2 (1 << 5) |
| #define MDM_CTL1_NGPIO 6 |
| |
| #define AUD_SEL_1341 (1 << 0) |
| #define AUD_MUTE_1341 (1 << 1) |
| #define AUD_NGPIO 2 |
| |
| extern void sa1110_mb_disable(void); |
| |
| #define to_neponset_gpio_chip(x) container_of(x, struct neponset_gpio_chip, gc) |
| |
| static const char *neponset_ncr_names[] = { |
| "gp01_off", "tp_power", "ms_power", "enet_osc", |
| "spi_kb_wk_up", "a0vpp", "a1vpp" |
| }; |
| |
| static const char *neponset_mdmctl0_names[] = { |
| "rts3", "dtr3", "rts1", "dtr1", |
| }; |
| |
| static const char *neponset_mdmctl1_names[] = { |
| "cts3", "dsr3", "dcd3", "cts1", "dsr1", "dcd1" |
| }; |
| |
| static const char *neponset_aud_names[] = { |
| "sel_1341", "mute_1341", |
| }; |
| |
| struct neponset_drvdata { |
| void __iomem *base; |
| struct platform_device *sa1111; |
| struct platform_device *smc91x; |
| unsigned irq_base; |
| struct gpio_chip *gpio[4]; |
| }; |
| |
| static struct gpiod_lookup_table neponset_pcmcia_table = { |
| .dev_id = "1800", |
| .table = { |
| GPIO_LOOKUP("sa1111", 1, "a0vcc", GPIO_ACTIVE_HIGH), |
| GPIO_LOOKUP("sa1111", 0, "a1vcc", GPIO_ACTIVE_HIGH), |
| GPIO_LOOKUP("neponset-ncr", 5, "a0vpp", GPIO_ACTIVE_HIGH), |
| GPIO_LOOKUP("neponset-ncr", 6, "a1vpp", GPIO_ACTIVE_HIGH), |
| GPIO_LOOKUP("sa1111", 2, "b0vcc", GPIO_ACTIVE_HIGH), |
| GPIO_LOOKUP("sa1111", 3, "b1vcc", GPIO_ACTIVE_HIGH), |
| { }, |
| }, |
| }; |
| |
| static struct neponset_drvdata *nep; |
| |
| void neponset_ncr_frob(unsigned int mask, unsigned int val) |
| { |
| struct neponset_drvdata *n = nep; |
| unsigned long m = mask, v = val; |
| |
| if (nep) |
| n->gpio[0]->set_multiple(n->gpio[0], &m, &v); |
| else |
| WARN(1, "nep unset\n"); |
| } |
| EXPORT_SYMBOL(neponset_ncr_frob); |
| |
| static void neponset_set_mctrl(struct uart_port *port, u_int mctrl) |
| { |
| struct neponset_drvdata *n = nep; |
| unsigned long mask, val = 0; |
| |
| if (!n) |
| return; |
| |
| if (port->mapbase == _Ser1UTCR0) { |
| mask = MDM_CTL0_RTS2 | MDM_CTL0_DTR2; |
| |
| if (!(mctrl & TIOCM_RTS)) |
| val |= MDM_CTL0_RTS2; |
| |
| if (!(mctrl & TIOCM_DTR)) |
| val |= MDM_CTL0_DTR2; |
| } else if (port->mapbase == _Ser3UTCR0) { |
| mask = MDM_CTL0_RTS1 | MDM_CTL0_DTR1; |
| |
| if (!(mctrl & TIOCM_RTS)) |
| val |= MDM_CTL0_RTS1; |
| |
| if (!(mctrl & TIOCM_DTR)) |
| val |= MDM_CTL0_DTR1; |
| } |
| |
| n->gpio[1]->set_multiple(n->gpio[1], &mask, &val); |
| } |
| |
| static u_int neponset_get_mctrl(struct uart_port *port) |
| { |
| void __iomem *base = nep->base; |
| u_int ret = TIOCM_CD | TIOCM_CTS | TIOCM_DSR; |
| u_int mdm_ctl1; |
| |
| if (!base) |
| return ret; |
| |
| mdm_ctl1 = readb_relaxed(base + MDM_CTL_1); |
| if (port->mapbase == _Ser1UTCR0) { |
| if (mdm_ctl1 & MDM_CTL1_DCD2) |
| ret &= ~TIOCM_CD; |
| if (mdm_ctl1 & MDM_CTL1_CTS2) |
| ret &= ~TIOCM_CTS; |
| if (mdm_ctl1 & MDM_CTL1_DSR2) |
| ret &= ~TIOCM_DSR; |
| } else if (port->mapbase == _Ser3UTCR0) { |
| if (mdm_ctl1 & MDM_CTL1_DCD1) |
| ret &= ~TIOCM_CD; |
| if (mdm_ctl1 & MDM_CTL1_CTS1) |
| ret &= ~TIOCM_CTS; |
| if (mdm_ctl1 & MDM_CTL1_DSR1) |
| ret &= ~TIOCM_DSR; |
| } |
| |
| return ret; |
| } |
| |
| static struct sa1100_port_fns neponset_port_fns = { |
| .set_mctrl = neponset_set_mctrl, |
| .get_mctrl = neponset_get_mctrl, |
| }; |
| |
| /* |
| * Install handler for Neponset IRQ. Note that we have to loop here |
| * since the ETHERNET and USAR IRQs are level based, and we need to |
| * ensure that the IRQ signal is deasserted before returning. This |
| * is rather unfortunate. |
| */ |
| static void neponset_irq_handler(struct irq_desc *desc) |
| { |
| struct neponset_drvdata *d = irq_desc_get_handler_data(desc); |
| unsigned int irr; |
| |
| while (1) { |
| /* |
| * Acknowledge the parent IRQ. |
| */ |
| desc->irq_data.chip->irq_ack(&desc->irq_data); |
| |
| /* |
| * Read the interrupt reason register. Let's have all |
| * active IRQ bits high. Note: there is a typo in the |
| * Neponset user's guide for the SA1111 IRR level. |
| */ |
| irr = readb_relaxed(d->base + IRR); |
| irr ^= IRR_ETHERNET | IRR_USAR; |
| |
| if ((irr & (IRR_ETHERNET | IRR_USAR | IRR_SA1111)) == 0) |
| break; |
| |
| /* |
| * Since there is no individual mask, we have to |
| * mask the parent IRQ. This is safe, since we'll |
| * recheck the register for any pending IRQs. |
| */ |
| if (irr & (IRR_ETHERNET | IRR_USAR)) { |
| desc->irq_data.chip->irq_mask(&desc->irq_data); |
| |
| /* |
| * Ack the interrupt now to prevent re-entering |
| * this neponset handler. Again, this is safe |
| * since we'll check the IRR register prior to |
| * leaving. |
| */ |
| desc->irq_data.chip->irq_ack(&desc->irq_data); |
| |
| if (irr & IRR_ETHERNET) |
| generic_handle_irq(d->irq_base + NEP_IRQ_SMC91X); |
| |
| if (irr & IRR_USAR) |
| generic_handle_irq(d->irq_base + NEP_IRQ_USAR); |
| |
| desc->irq_data.chip->irq_unmask(&desc->irq_data); |
| } |
| |
| if (irr & IRR_SA1111) |
| generic_handle_irq(d->irq_base + NEP_IRQ_SA1111); |
| } |
| } |
| |
| /* Yes, we really do not have any kind of masking or unmasking */ |
| static void nochip_noop(struct irq_data *irq) |
| { |
| } |
| |
| static struct irq_chip nochip = { |
| .name = "neponset", |
| .irq_ack = nochip_noop, |
| .irq_mask = nochip_noop, |
| .irq_unmask = nochip_noop, |
| }; |
| |
| static int neponset_init_gpio(struct gpio_chip **gcp, |
| struct device *dev, const char *label, void __iomem *reg, |
| unsigned num, bool in, const char *const * names) |
| { |
| struct gpio_chip *gc; |
| |
| gc = gpio_reg_init(dev, reg, -1, num, label, in ? 0xffffffff : 0, |
| readl_relaxed(reg), names, NULL, NULL); |
| if (IS_ERR(gc)) |
| return PTR_ERR(gc); |
| |
| *gcp = gc; |
| |
| return 0; |
| } |
| |
| static struct sa1111_platform_data sa1111_info = { |
| .disable_devs = SA1111_DEVID_PS2_MSE, |
| }; |
| |
| static int neponset_probe(struct platform_device *dev) |
| { |
| struct neponset_drvdata *d; |
| struct resource *nep_res, *sa1111_res, *smc91x_res; |
| struct resource sa1111_resources[] = { |
| DEFINE_RES_MEM(0x40000000, SZ_8K), |
| { .flags = IORESOURCE_IRQ }, |
| }; |
| struct platform_device_info sa1111_devinfo = { |
| .parent = &dev->dev, |
| .name = "sa1111", |
| .id = 0, |
| .res = sa1111_resources, |
| .num_res = ARRAY_SIZE(sa1111_resources), |
| .data = &sa1111_info, |
| .size_data = sizeof(sa1111_info), |
| .dma_mask = 0xffffffffUL, |
| }; |
| struct resource smc91x_resources[] = { |
| DEFINE_RES_MEM_NAMED(SA1100_CS3_PHYS, |
| 0x02000000, "smc91x-regs"), |
| DEFINE_RES_MEM_NAMED(SA1100_CS3_PHYS + 0x02000000, |
| 0x02000000, "smc91x-attrib"), |
| { .flags = IORESOURCE_IRQ }, |
| }; |
| struct smc91x_platdata smc91x_platdata = { |
| .flags = SMC91X_USE_8BIT | SMC91X_IO_SHIFT_2 | SMC91X_NOWAIT, |
| }; |
| struct platform_device_info smc91x_devinfo = { |
| .parent = &dev->dev, |
| .name = "smc91x", |
| .id = 0, |
| .res = smc91x_resources, |
| .num_res = ARRAY_SIZE(smc91x_resources), |
| .data = &smc91x_platdata, |
| .size_data = sizeof(smc91x_platdata), |
| }; |
| int ret, irq; |
| |
| if (nep) |
| return -EBUSY; |
| |
| irq = ret = platform_get_irq(dev, 0); |
| if (ret < 0) |
| goto err_alloc; |
| |
| nep_res = platform_get_resource(dev, IORESOURCE_MEM, 0); |
| smc91x_res = platform_get_resource(dev, IORESOURCE_MEM, 1); |
| sa1111_res = platform_get_resource(dev, IORESOURCE_MEM, 2); |
| if (!nep_res || !smc91x_res || !sa1111_res) { |
| ret = -ENXIO; |
| goto err_alloc; |
| } |
| |
| d = kzalloc(sizeof(*d), GFP_KERNEL); |
| if (!d) { |
| ret = -ENOMEM; |
| goto err_alloc; |
| } |
| |
| d->base = ioremap(nep_res->start, SZ_4K); |
| if (!d->base) { |
| ret = -ENOMEM; |
| goto err_ioremap; |
| } |
| |
| if (readb_relaxed(d->base + WHOAMI) != 0x11) { |
| dev_warn(&dev->dev, "Neponset board detected, but wrong ID: %02x\n", |
| readb_relaxed(d->base + WHOAMI)); |
| ret = -ENODEV; |
| goto err_id; |
| } |
| |
| ret = irq_alloc_descs(-1, IRQ_BOARD_START, NEP_IRQ_NR, -1); |
| if (ret <= 0) { |
| dev_err(&dev->dev, "unable to allocate %u irqs: %d\n", |
| NEP_IRQ_NR, ret); |
| if (ret == 0) |
| ret = -ENOMEM; |
| goto err_irq_alloc; |
| } |
| |
| d->irq_base = ret; |
| |
| irq_set_chip_and_handler(d->irq_base + NEP_IRQ_SMC91X, &nochip, |
| handle_simple_irq); |
| irq_clear_status_flags(d->irq_base + NEP_IRQ_SMC91X, IRQ_NOREQUEST | IRQ_NOPROBE); |
| irq_set_chip_and_handler(d->irq_base + NEP_IRQ_USAR, &nochip, |
| handle_simple_irq); |
| irq_clear_status_flags(d->irq_base + NEP_IRQ_USAR, IRQ_NOREQUEST | IRQ_NOPROBE); |
| irq_set_chip(d->irq_base + NEP_IRQ_SA1111, &nochip); |
| |
| irq_set_irq_type(irq, IRQ_TYPE_EDGE_RISING); |
| irq_set_chained_handler_and_data(irq, neponset_irq_handler, d); |
| |
| /* Disable GPIO 0/1 drivers so the buttons work on the Assabet */ |
| writeb_relaxed(NCR_GP01_OFF, d->base + NCR_0); |
| |
| neponset_init_gpio(&d->gpio[0], &dev->dev, "neponset-ncr", |
| d->base + NCR_0, NCR_NGPIO, false, |
| neponset_ncr_names); |
| neponset_init_gpio(&d->gpio[1], &dev->dev, "neponset-mdm-ctl0", |
| d->base + MDM_CTL_0, MDM_CTL0_NGPIO, false, |
| neponset_mdmctl0_names); |
| neponset_init_gpio(&d->gpio[2], &dev->dev, "neponset-mdm-ctl1", |
| d->base + MDM_CTL_1, MDM_CTL1_NGPIO, true, |
| neponset_mdmctl1_names); |
| neponset_init_gpio(&d->gpio[3], &dev->dev, "neponset-aud-ctl", |
| d->base + AUD_CTL, AUD_NGPIO, false, |
| neponset_aud_names); |
| |
| gpiod_add_lookup_table(&neponset_pcmcia_table); |
| |
| /* |
| * We would set IRQ_GPIO25 to be a wake-up IRQ, but unfortunately |
| * something on the Neponset activates this IRQ on sleep (eth?) |
| */ |
| #if 0 |
| enable_irq_wake(irq); |
| #endif |
| |
| dev_info(&dev->dev, "Neponset daughter board, providing IRQ%u-%u\n", |
| d->irq_base, d->irq_base + NEP_IRQ_NR - 1); |
| nep = d; |
| |
| sa1100_register_uart_fns(&neponset_port_fns); |
| |
| /* Ensure that the memory bus request/grant signals are setup */ |
| sa1110_mb_disable(); |
| |
| sa1111_resources[0].parent = sa1111_res; |
| sa1111_resources[1].start = d->irq_base + NEP_IRQ_SA1111; |
| sa1111_resources[1].end = d->irq_base + NEP_IRQ_SA1111; |
| d->sa1111 = platform_device_register_full(&sa1111_devinfo); |
| |
| smc91x_resources[0].parent = smc91x_res; |
| smc91x_resources[1].parent = smc91x_res; |
| smc91x_resources[2].start = d->irq_base + NEP_IRQ_SMC91X; |
| smc91x_resources[2].end = d->irq_base + NEP_IRQ_SMC91X; |
| d->smc91x = platform_device_register_full(&smc91x_devinfo); |
| |
| platform_set_drvdata(dev, d); |
| |
| return 0; |
| |
| err_irq_alloc: |
| err_id: |
| iounmap(d->base); |
| err_ioremap: |
| kfree(d); |
| err_alloc: |
| return ret; |
| } |
| |
| static int neponset_remove(struct platform_device *dev) |
| { |
| struct neponset_drvdata *d = platform_get_drvdata(dev); |
| int irq = platform_get_irq(dev, 0); |
| |
| if (!IS_ERR(d->sa1111)) |
| platform_device_unregister(d->sa1111); |
| if (!IS_ERR(d->smc91x)) |
| platform_device_unregister(d->smc91x); |
| |
| gpiod_remove_lookup_table(&neponset_pcmcia_table); |
| |
| irq_set_chained_handler(irq, NULL); |
| irq_free_descs(d->irq_base, NEP_IRQ_NR); |
| nep = NULL; |
| iounmap(d->base); |
| kfree(d); |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_PM_SLEEP |
| static int neponset_resume(struct device *dev) |
| { |
| struct neponset_drvdata *d = dev_get_drvdata(dev); |
| int i, ret = 0; |
| |
| for (i = 0; i < ARRAY_SIZE(d->gpio); i++) { |
| ret = gpio_reg_resume(d->gpio[i]); |
| if (ret) |
| break; |
| } |
| |
| return ret; |
| } |
| |
| static const struct dev_pm_ops neponset_pm_ops = { |
| .resume_noirq = neponset_resume, |
| .restore_noirq = neponset_resume, |
| }; |
| #define PM_OPS &neponset_pm_ops |
| #else |
| #define PM_OPS NULL |
| #endif |
| |
| static struct platform_driver neponset_device_driver = { |
| .probe = neponset_probe, |
| .remove = neponset_remove, |
| .driver = { |
| .name = "neponset", |
| .pm = PM_OPS, |
| }, |
| }; |
| |
| static int __init neponset_init(void) |
| { |
| return platform_driver_register(&neponset_device_driver); |
| } |
| |
| subsys_initcall(neponset_init); |