| /* |
| * Bluetooth support for Realtek devices |
| * |
| * Copyright (C) 2015 Endless Mobile, Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/firmware.h> |
| #include <asm/unaligned.h> |
| #include <linux/usb.h> |
| |
| #include <net/bluetooth/bluetooth.h> |
| #include <net/bluetooth/hci_core.h> |
| |
| #include "btrtl.h" |
| |
| #define VERSION "0.1" |
| |
| #define RTL_EPATCH_SIGNATURE "Realtech" |
| #define RTL_ROM_LMP_3499 0x3499 |
| #define RTL_ROM_LMP_8723A 0x1200 |
| #define RTL_ROM_LMP_8723B 0x8723 |
| #define RTL_ROM_LMP_8821A 0x8821 |
| #define RTL_ROM_LMP_8761A 0x8761 |
| #define RTL_ROM_LMP_8822B 0x8822 |
| #define RTL_CONFIG_MAGIC 0x8723ab55 |
| |
| #define IC_MATCH_FL_LMPSUBV (1 << 0) |
| #define IC_MATCH_FL_HCIREV (1 << 1) |
| #define IC_MATCH_FL_HCIVER (1 << 2) |
| #define IC_MATCH_FL_HCIBUS (1 << 3) |
| #define IC_INFO(lmps, hcir) \ |
| .match_flags = IC_MATCH_FL_LMPSUBV | IC_MATCH_FL_HCIREV, \ |
| .lmp_subver = (lmps), \ |
| .hci_rev = (hcir) |
| |
| struct id_table { |
| __u16 match_flags; |
| __u16 lmp_subver; |
| __u16 hci_rev; |
| __u8 hci_ver; |
| __u8 hci_bus; |
| bool config_needed; |
| bool has_rom_version; |
| char *fw_name; |
| char *cfg_name; |
| }; |
| |
| struct btrtl_device_info { |
| const struct id_table *ic_info; |
| u8 rom_version; |
| u8 *fw_data; |
| int fw_len; |
| u8 *cfg_data; |
| int cfg_len; |
| }; |
| |
| static const struct id_table ic_id_table[] = { |
| { IC_MATCH_FL_LMPSUBV, RTL_ROM_LMP_8723A, 0x0, |
| .config_needed = false, |
| .has_rom_version = false, |
| .fw_name = "rtl_bt/rtl8723a_fw.bin", |
| .cfg_name = NULL }, |
| |
| { IC_MATCH_FL_LMPSUBV, RTL_ROM_LMP_3499, 0x0, |
| .config_needed = false, |
| .has_rom_version = false, |
| .fw_name = "rtl_bt/rtl8723a_fw.bin", |
| .cfg_name = NULL }, |
| |
| /* 8723BS */ |
| { .match_flags = IC_MATCH_FL_LMPSUBV | IC_MATCH_FL_HCIREV | |
| IC_MATCH_FL_HCIVER | IC_MATCH_FL_HCIBUS, |
| .lmp_subver = RTL_ROM_LMP_8723B, |
| .hci_rev = 0xb, |
| .hci_ver = 6, |
| .hci_bus = HCI_UART, |
| .config_needed = true, |
| .has_rom_version = true, |
| .fw_name = "rtl_bt/rtl8723bs_fw.bin", |
| .cfg_name = "rtl_bt/rtl8723bs_config" }, |
| |
| /* 8723B */ |
| { IC_INFO(RTL_ROM_LMP_8723B, 0xb), |
| .config_needed = false, |
| .has_rom_version = true, |
| .fw_name = "rtl_bt/rtl8723b_fw.bin", |
| .cfg_name = "rtl_bt/rtl8723b_config" }, |
| |
| /* 8723D */ |
| { IC_INFO(RTL_ROM_LMP_8723B, 0xd), |
| .config_needed = true, |
| .has_rom_version = true, |
| .fw_name = "rtl_bt/rtl8723d_fw.bin", |
| .cfg_name = "rtl_bt/rtl8723d_config" }, |
| |
| /* 8723DS */ |
| { .match_flags = IC_MATCH_FL_LMPSUBV | IC_MATCH_FL_HCIREV | |
| IC_MATCH_FL_HCIVER | IC_MATCH_FL_HCIBUS, |
| .lmp_subver = RTL_ROM_LMP_8723B, |
| .hci_rev = 0xd, |
| .hci_ver = 8, |
| .hci_bus = HCI_UART, |
| .config_needed = true, |
| .has_rom_version = true, |
| .fw_name = "rtl_bt/rtl8723ds_fw.bin", |
| .cfg_name = "rtl_bt/rtl8723ds_config" }, |
| |
| /* 8821A */ |
| { IC_INFO(RTL_ROM_LMP_8821A, 0xa), |
| .config_needed = false, |
| .has_rom_version = true, |
| .fw_name = "rtl_bt/rtl8821a_fw.bin", |
| .cfg_name = "rtl_bt/rtl8821a_config" }, |
| |
| /* 8821C */ |
| { IC_INFO(RTL_ROM_LMP_8821A, 0xc), |
| .config_needed = false, |
| .has_rom_version = true, |
| .fw_name = "rtl_bt/rtl8821c_fw.bin", |
| .cfg_name = "rtl_bt/rtl8821c_config" }, |
| |
| /* 8761A */ |
| { IC_MATCH_FL_LMPSUBV, RTL_ROM_LMP_8761A, 0x0, |
| .config_needed = false, |
| .has_rom_version = true, |
| .fw_name = "rtl_bt/rtl8761a_fw.bin", |
| .cfg_name = "rtl_bt/rtl8761a_config" }, |
| |
| /* 8822C with USB interface */ |
| { IC_INFO(RTL_ROM_LMP_8822B, 0xc), |
| .config_needed = false, |
| .has_rom_version = true, |
| .fw_name = "rtl_bt/rtl8822cu_fw.bin", |
| .cfg_name = "rtl_bt/rtl8822cu_config" }, |
| |
| /* 8822B */ |
| { IC_INFO(RTL_ROM_LMP_8822B, 0xb), |
| .config_needed = true, |
| .has_rom_version = true, |
| .fw_name = "rtl_bt/rtl8822b_fw.bin", |
| .cfg_name = "rtl_bt/rtl8822b_config" }, |
| }; |
| |
| static const struct id_table *btrtl_match_ic(u16 lmp_subver, u16 hci_rev, |
| u8 hci_ver, u8 hci_bus) |
| { |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(ic_id_table); i++) { |
| if ((ic_id_table[i].match_flags & IC_MATCH_FL_LMPSUBV) && |
| (ic_id_table[i].lmp_subver != lmp_subver)) |
| continue; |
| if ((ic_id_table[i].match_flags & IC_MATCH_FL_HCIREV) && |
| (ic_id_table[i].hci_rev != hci_rev)) |
| continue; |
| if ((ic_id_table[i].match_flags & IC_MATCH_FL_HCIVER) && |
| (ic_id_table[i].hci_ver != hci_ver)) |
| continue; |
| if ((ic_id_table[i].match_flags & IC_MATCH_FL_HCIBUS) && |
| (ic_id_table[i].hci_bus != hci_bus)) |
| continue; |
| |
| break; |
| } |
| if (i >= ARRAY_SIZE(ic_id_table)) |
| return NULL; |
| |
| return &ic_id_table[i]; |
| } |
| |
| static int rtl_read_rom_version(struct hci_dev *hdev, u8 *version) |
| { |
| struct rtl_rom_version_evt *rom_version; |
| struct sk_buff *skb; |
| |
| /* Read RTL ROM version command */ |
| skb = __hci_cmd_sync(hdev, 0xfc6d, 0, NULL, HCI_INIT_TIMEOUT); |
| if (IS_ERR(skb)) { |
| rtl_dev_err(hdev, "Read ROM version failed (%ld)\n", |
| PTR_ERR(skb)); |
| return PTR_ERR(skb); |
| } |
| |
| if (skb->len != sizeof(*rom_version)) { |
| rtl_dev_err(hdev, "RTL version event length mismatch\n"); |
| kfree_skb(skb); |
| return -EIO; |
| } |
| |
| rom_version = (struct rtl_rom_version_evt *)skb->data; |
| rtl_dev_info(hdev, "rom_version status=%x version=%x\n", |
| rom_version->status, rom_version->version); |
| |
| *version = rom_version->version; |
| |
| kfree_skb(skb); |
| return 0; |
| } |
| |
| static int rtlbt_parse_firmware(struct hci_dev *hdev, |
| struct btrtl_device_info *btrtl_dev, |
| unsigned char **_buf) |
| { |
| static const u8 extension_sig[] = { 0x51, 0x04, 0xfd, 0x77 }; |
| struct rtl_epatch_header *epatch_info; |
| unsigned char *buf; |
| int i, len; |
| size_t min_size; |
| u8 opcode, length, data; |
| int project_id = -1; |
| const unsigned char *fwptr, *chip_id_base; |
| const unsigned char *patch_length_base, *patch_offset_base; |
| u32 patch_offset = 0; |
| u16 patch_length, num_patches; |
| static const struct { |
| __u16 lmp_subver; |
| __u8 id; |
| } project_id_to_lmp_subver[] = { |
| { RTL_ROM_LMP_8723A, 0 }, |
| { RTL_ROM_LMP_8723B, 1 }, |
| { RTL_ROM_LMP_8821A, 2 }, |
| { RTL_ROM_LMP_8761A, 3 }, |
| { RTL_ROM_LMP_8822B, 8 }, |
| { RTL_ROM_LMP_8723B, 9 }, /* 8723D */ |
| { RTL_ROM_LMP_8821A, 10 }, /* 8821C */ |
| { RTL_ROM_LMP_8822B, 13 }, /* 8822C */ |
| }; |
| |
| min_size = sizeof(struct rtl_epatch_header) + sizeof(extension_sig) + 3; |
| if (btrtl_dev->fw_len < min_size) |
| return -EINVAL; |
| |
| fwptr = btrtl_dev->fw_data + btrtl_dev->fw_len - sizeof(extension_sig); |
| if (memcmp(fwptr, extension_sig, sizeof(extension_sig)) != 0) { |
| rtl_dev_err(hdev, "extension section signature mismatch\n"); |
| return -EINVAL; |
| } |
| |
| /* Loop from the end of the firmware parsing instructions, until |
| * we find an instruction that identifies the "project ID" for the |
| * hardware supported by this firwmare file. |
| * Once we have that, we double-check that that project_id is suitable |
| * for the hardware we are working with. |
| */ |
| while (fwptr >= btrtl_dev->fw_data + (sizeof(*epatch_info) + 3)) { |
| opcode = *--fwptr; |
| length = *--fwptr; |
| data = *--fwptr; |
| |
| BT_DBG("check op=%x len=%x data=%x", opcode, length, data); |
| |
| if (opcode == 0xff) /* EOF */ |
| break; |
| |
| if (length == 0) { |
| rtl_dev_err(hdev, "found instruction with length 0\n"); |
| return -EINVAL; |
| } |
| |
| if (opcode == 0 && length == 1) { |
| project_id = data; |
| break; |
| } |
| |
| fwptr -= length; |
| } |
| |
| if (project_id < 0) { |
| rtl_dev_err(hdev, "failed to find version instruction\n"); |
| return -EINVAL; |
| } |
| |
| /* Find project_id in table */ |
| for (i = 0; i < ARRAY_SIZE(project_id_to_lmp_subver); i++) { |
| if (project_id == project_id_to_lmp_subver[i].id) |
| break; |
| } |
| |
| if (i >= ARRAY_SIZE(project_id_to_lmp_subver)) { |
| rtl_dev_err(hdev, "unknown project id %d\n", project_id); |
| return -EINVAL; |
| } |
| |
| if (btrtl_dev->ic_info->lmp_subver != |
| project_id_to_lmp_subver[i].lmp_subver) { |
| rtl_dev_err(hdev, "firmware is for %x but this is a %x\n", |
| project_id_to_lmp_subver[i].lmp_subver, |
| btrtl_dev->ic_info->lmp_subver); |
| return -EINVAL; |
| } |
| |
| epatch_info = (struct rtl_epatch_header *)btrtl_dev->fw_data; |
| if (memcmp(epatch_info->signature, RTL_EPATCH_SIGNATURE, 8) != 0) { |
| rtl_dev_err(hdev, "bad EPATCH signature\n"); |
| return -EINVAL; |
| } |
| |
| num_patches = le16_to_cpu(epatch_info->num_patches); |
| BT_DBG("fw_version=%x, num_patches=%d", |
| le32_to_cpu(epatch_info->fw_version), num_patches); |
| |
| /* After the rtl_epatch_header there is a funky patch metadata section. |
| * Assuming 2 patches, the layout is: |
| * ChipID1 ChipID2 PatchLength1 PatchLength2 PatchOffset1 PatchOffset2 |
| * |
| * Find the right patch for this chip. |
| */ |
| min_size += 8 * num_patches; |
| if (btrtl_dev->fw_len < min_size) |
| return -EINVAL; |
| |
| chip_id_base = btrtl_dev->fw_data + sizeof(struct rtl_epatch_header); |
| patch_length_base = chip_id_base + (sizeof(u16) * num_patches); |
| patch_offset_base = patch_length_base + (sizeof(u16) * num_patches); |
| for (i = 0; i < num_patches; i++) { |
| u16 chip_id = get_unaligned_le16(chip_id_base + |
| (i * sizeof(u16))); |
| if (chip_id == btrtl_dev->rom_version + 1) { |
| patch_length = get_unaligned_le16(patch_length_base + |
| (i * sizeof(u16))); |
| patch_offset = get_unaligned_le32(patch_offset_base + |
| (i * sizeof(u32))); |
| break; |
| } |
| } |
| |
| if (!patch_offset) { |
| rtl_dev_err(hdev, "didn't find patch for chip id %d", |
| btrtl_dev->rom_version); |
| return -EINVAL; |
| } |
| |
| BT_DBG("length=%x offset=%x index %d", patch_length, patch_offset, i); |
| min_size = patch_offset + patch_length; |
| if (btrtl_dev->fw_len < min_size) |
| return -EINVAL; |
| |
| /* Copy the firmware into a new buffer and write the version at |
| * the end. |
| */ |
| len = patch_length; |
| buf = kmemdup(btrtl_dev->fw_data + patch_offset, patch_length, |
| GFP_KERNEL); |
| if (!buf) |
| return -ENOMEM; |
| |
| memcpy(buf + patch_length - 4, &epatch_info->fw_version, 4); |
| |
| *_buf = buf; |
| return len; |
| } |
| |
| static int rtl_download_firmware(struct hci_dev *hdev, |
| const unsigned char *data, int fw_len) |
| { |
| struct rtl_download_cmd *dl_cmd; |
| int frag_num = fw_len / RTL_FRAG_LEN + 1; |
| int frag_len = RTL_FRAG_LEN; |
| int ret = 0; |
| int i; |
| |
| dl_cmd = kmalloc(sizeof(struct rtl_download_cmd), GFP_KERNEL); |
| if (!dl_cmd) |
| return -ENOMEM; |
| |
| for (i = 0; i < frag_num; i++) { |
| struct sk_buff *skb; |
| |
| BT_DBG("download fw (%d/%d)", i, frag_num); |
| |
| dl_cmd->index = i; |
| if (i == (frag_num - 1)) { |
| dl_cmd->index |= 0x80; /* data end */ |
| frag_len = fw_len % RTL_FRAG_LEN; |
| } |
| memcpy(dl_cmd->data, data, frag_len); |
| |
| /* Send download command */ |
| skb = __hci_cmd_sync(hdev, 0xfc20, frag_len + 1, dl_cmd, |
| HCI_INIT_TIMEOUT); |
| if (IS_ERR(skb)) { |
| rtl_dev_err(hdev, "download fw command failed (%ld)\n", |
| PTR_ERR(skb)); |
| ret = -PTR_ERR(skb); |
| goto out; |
| } |
| |
| if (skb->len != sizeof(struct rtl_download_response)) { |
| rtl_dev_err(hdev, "download fw event length mismatch\n"); |
| kfree_skb(skb); |
| ret = -EIO; |
| goto out; |
| } |
| |
| kfree_skb(skb); |
| data += RTL_FRAG_LEN; |
| } |
| |
| out: |
| kfree(dl_cmd); |
| return ret; |
| } |
| |
| static int rtl_load_file(struct hci_dev *hdev, const char *name, u8 **buff) |
| { |
| const struct firmware *fw; |
| int ret; |
| |
| rtl_dev_info(hdev, "rtl: loading %s\n", name); |
| ret = request_firmware(&fw, name, &hdev->dev); |
| if (ret < 0) |
| return ret; |
| ret = fw->size; |
| *buff = kmemdup(fw->data, ret, GFP_KERNEL); |
| if (!*buff) |
| ret = -ENOMEM; |
| |
| release_firmware(fw); |
| |
| return ret; |
| } |
| |
| static int btrtl_setup_rtl8723a(struct hci_dev *hdev, |
| struct btrtl_device_info *btrtl_dev) |
| { |
| if (btrtl_dev->fw_len < 8) |
| return -EINVAL; |
| |
| /* Check that the firmware doesn't have the epatch signature |
| * (which is only for RTL8723B and newer). |
| */ |
| if (!memcmp(btrtl_dev->fw_data, RTL_EPATCH_SIGNATURE, 8)) { |
| rtl_dev_err(hdev, "unexpected EPATCH signature!\n"); |
| return -EINVAL; |
| } |
| |
| return rtl_download_firmware(hdev, btrtl_dev->fw_data, |
| btrtl_dev->fw_len); |
| } |
| |
| static int btrtl_setup_rtl8723b(struct hci_dev *hdev, |
| struct btrtl_device_info *btrtl_dev) |
| { |
| unsigned char *fw_data = NULL; |
| int ret; |
| u8 *tbuff; |
| |
| ret = rtlbt_parse_firmware(hdev, btrtl_dev, &fw_data); |
| if (ret < 0) |
| goto out; |
| |
| if (btrtl_dev->cfg_len > 0) { |
| tbuff = kzalloc(ret + btrtl_dev->cfg_len, GFP_KERNEL); |
| if (!tbuff) { |
| ret = -ENOMEM; |
| goto out; |
| } |
| |
| memcpy(tbuff, fw_data, ret); |
| kfree(fw_data); |
| |
| memcpy(tbuff + ret, btrtl_dev->cfg_data, btrtl_dev->cfg_len); |
| ret += btrtl_dev->cfg_len; |
| |
| fw_data = tbuff; |
| } |
| |
| rtl_dev_info(hdev, "cfg_sz %d, total sz %d\n", btrtl_dev->cfg_len, ret); |
| |
| ret = rtl_download_firmware(hdev, fw_data, ret); |
| |
| out: |
| kfree(fw_data); |
| return ret; |
| } |
| |
| static struct sk_buff *btrtl_read_local_version(struct hci_dev *hdev) |
| { |
| struct sk_buff *skb; |
| |
| skb = __hci_cmd_sync(hdev, HCI_OP_READ_LOCAL_VERSION, 0, NULL, |
| HCI_INIT_TIMEOUT); |
| if (IS_ERR(skb)) { |
| rtl_dev_err(hdev, "HCI_OP_READ_LOCAL_VERSION failed (%ld)\n", |
| PTR_ERR(skb)); |
| return skb; |
| } |
| |
| if (skb->len != sizeof(struct hci_rp_read_local_version)) { |
| rtl_dev_err(hdev, "HCI_OP_READ_LOCAL_VERSION event length mismatch\n"); |
| kfree_skb(skb); |
| return ERR_PTR(-EIO); |
| } |
| |
| return skb; |
| } |
| |
| void btrtl_free(struct btrtl_device_info *btrtl_dev) |
| { |
| kfree(btrtl_dev->fw_data); |
| kfree(btrtl_dev->cfg_data); |
| kfree(btrtl_dev); |
| } |
| EXPORT_SYMBOL_GPL(btrtl_free); |
| |
| struct btrtl_device_info *btrtl_initialize(struct hci_dev *hdev, |
| const char *postfix) |
| { |
| struct btrtl_device_info *btrtl_dev; |
| struct sk_buff *skb; |
| struct hci_rp_read_local_version *resp; |
| char cfg_name[40]; |
| u16 hci_rev, lmp_subver; |
| u8 hci_ver; |
| int ret; |
| |
| btrtl_dev = kzalloc(sizeof(*btrtl_dev), GFP_KERNEL); |
| if (!btrtl_dev) { |
| ret = -ENOMEM; |
| goto err_alloc; |
| } |
| |
| skb = btrtl_read_local_version(hdev); |
| if (IS_ERR(skb)) { |
| ret = PTR_ERR(skb); |
| goto err_free; |
| } |
| |
| resp = (struct hci_rp_read_local_version *)skb->data; |
| rtl_dev_info(hdev, "rtl: examining hci_ver=%02x hci_rev=%04x lmp_ver=%02x lmp_subver=%04x\n", |
| resp->hci_ver, resp->hci_rev, |
| resp->lmp_ver, resp->lmp_subver); |
| |
| hci_ver = resp->hci_ver; |
| hci_rev = le16_to_cpu(resp->hci_rev); |
| lmp_subver = le16_to_cpu(resp->lmp_subver); |
| kfree_skb(skb); |
| |
| btrtl_dev->ic_info = btrtl_match_ic(lmp_subver, hci_rev, hci_ver, |
| hdev->bus); |
| |
| if (!btrtl_dev->ic_info) { |
| rtl_dev_info(hdev, "rtl: unknown IC info, lmp subver %04x, hci rev %04x, hci ver %04x", |
| lmp_subver, hci_rev, hci_ver); |
| return btrtl_dev; |
| } |
| |
| if (btrtl_dev->ic_info->has_rom_version) { |
| ret = rtl_read_rom_version(hdev, &btrtl_dev->rom_version); |
| if (ret) |
| goto err_free; |
| } |
| |
| btrtl_dev->fw_len = rtl_load_file(hdev, btrtl_dev->ic_info->fw_name, |
| &btrtl_dev->fw_data); |
| if (btrtl_dev->fw_len < 0) { |
| rtl_dev_err(hdev, "firmware file %s not found\n", |
| btrtl_dev->ic_info->fw_name); |
| ret = btrtl_dev->fw_len; |
| goto err_free; |
| } |
| |
| if (btrtl_dev->ic_info->cfg_name) { |
| if (postfix) { |
| snprintf(cfg_name, sizeof(cfg_name), "%s-%s.bin", |
| btrtl_dev->ic_info->cfg_name, postfix); |
| } else { |
| snprintf(cfg_name, sizeof(cfg_name), "%s.bin", |
| btrtl_dev->ic_info->cfg_name); |
| } |
| btrtl_dev->cfg_len = rtl_load_file(hdev, cfg_name, |
| &btrtl_dev->cfg_data); |
| if (btrtl_dev->ic_info->config_needed && |
| btrtl_dev->cfg_len <= 0) { |
| rtl_dev_err(hdev, "mandatory config file %s not found\n", |
| btrtl_dev->ic_info->cfg_name); |
| ret = btrtl_dev->cfg_len; |
| goto err_free; |
| } |
| } |
| |
| return btrtl_dev; |
| |
| err_free: |
| btrtl_free(btrtl_dev); |
| err_alloc: |
| return ERR_PTR(ret); |
| } |
| EXPORT_SYMBOL_GPL(btrtl_initialize); |
| |
| int btrtl_download_firmware(struct hci_dev *hdev, |
| struct btrtl_device_info *btrtl_dev) |
| { |
| /* Match a set of subver values that correspond to stock firmware, |
| * which is not compatible with standard btusb. |
| * If matched, upload an alternative firmware that does conform to |
| * standard btusb. Once that firmware is uploaded, the subver changes |
| * to a different value. |
| */ |
| if (!btrtl_dev->ic_info) { |
| rtl_dev_info(hdev, "rtl: assuming no firmware upload needed\n"); |
| return 0; |
| } |
| |
| switch (btrtl_dev->ic_info->lmp_subver) { |
| case RTL_ROM_LMP_8723A: |
| case RTL_ROM_LMP_3499: |
| return btrtl_setup_rtl8723a(hdev, btrtl_dev); |
| case RTL_ROM_LMP_8723B: |
| case RTL_ROM_LMP_8821A: |
| case RTL_ROM_LMP_8761A: |
| case RTL_ROM_LMP_8822B: |
| return btrtl_setup_rtl8723b(hdev, btrtl_dev); |
| default: |
| rtl_dev_info(hdev, "rtl: assuming no firmware upload needed\n"); |
| return 0; |
| } |
| } |
| EXPORT_SYMBOL_GPL(btrtl_download_firmware); |
| |
| int btrtl_setup_realtek(struct hci_dev *hdev) |
| { |
| struct btrtl_device_info *btrtl_dev; |
| int ret; |
| |
| btrtl_dev = btrtl_initialize(hdev, NULL); |
| if (IS_ERR(btrtl_dev)) |
| return PTR_ERR(btrtl_dev); |
| |
| ret = btrtl_download_firmware(hdev, btrtl_dev); |
| |
| btrtl_free(btrtl_dev); |
| |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(btrtl_setup_realtek); |
| |
| static unsigned int btrtl_convert_baudrate(u32 device_baudrate) |
| { |
| switch (device_baudrate) { |
| case 0x0252a00a: |
| return 230400; |
| |
| case 0x05f75004: |
| return 921600; |
| |
| case 0x00005004: |
| return 1000000; |
| |
| case 0x04928002: |
| case 0x01128002: |
| return 1500000; |
| |
| case 0x00005002: |
| return 2000000; |
| |
| case 0x0000b001: |
| return 2500000; |
| |
| case 0x04928001: |
| return 3000000; |
| |
| case 0x052a6001: |
| return 3500000; |
| |
| case 0x00005001: |
| return 4000000; |
| |
| case 0x0252c014: |
| default: |
| return 115200; |
| } |
| } |
| |
| int btrtl_get_uart_settings(struct hci_dev *hdev, |
| struct btrtl_device_info *btrtl_dev, |
| unsigned int *controller_baudrate, |
| u32 *device_baudrate, bool *flow_control) |
| { |
| struct rtl_vendor_config *config; |
| struct rtl_vendor_config_entry *entry; |
| int i, total_data_len; |
| bool found = false; |
| |
| total_data_len = btrtl_dev->cfg_len - sizeof(*config); |
| if (total_data_len <= 0) { |
| rtl_dev_warn(hdev, "no config loaded\n"); |
| return -EINVAL; |
| } |
| |
| config = (struct rtl_vendor_config *)btrtl_dev->cfg_data; |
| if (le32_to_cpu(config->signature) != RTL_CONFIG_MAGIC) { |
| rtl_dev_err(hdev, "invalid config magic\n"); |
| return -EINVAL; |
| } |
| |
| if (total_data_len < le16_to_cpu(config->total_len)) { |
| rtl_dev_err(hdev, "config is too short\n"); |
| return -EINVAL; |
| } |
| |
| for (i = 0; i < total_data_len; ) { |
| entry = ((void *)config->entry) + i; |
| |
| switch (le16_to_cpu(entry->offset)) { |
| case 0xc: |
| if (entry->len < sizeof(*device_baudrate)) { |
| rtl_dev_err(hdev, "invalid UART config entry\n"); |
| return -EINVAL; |
| } |
| |
| *device_baudrate = get_unaligned_le32(entry->data); |
| *controller_baudrate = btrtl_convert_baudrate( |
| *device_baudrate); |
| |
| if (entry->len >= 13) |
| *flow_control = !!(entry->data[12] & BIT(2)); |
| else |
| *flow_control = false; |
| |
| found = true; |
| break; |
| |
| default: |
| rtl_dev_dbg(hdev, "skipping config entry 0x%x (len %u)\n", |
| le16_to_cpu(entry->offset), entry->len); |
| break; |
| }; |
| |
| i += sizeof(*entry) + entry->len; |
| } |
| |
| if (!found) { |
| rtl_dev_err(hdev, "no UART config entry found\n"); |
| return -ENOENT; |
| } |
| |
| rtl_dev_dbg(hdev, "device baudrate = 0x%08x\n", *device_baudrate); |
| rtl_dev_dbg(hdev, "controller baudrate = %u\n", *controller_baudrate); |
| rtl_dev_dbg(hdev, "flow control %d\n", *flow_control); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(btrtl_get_uart_settings); |
| |
| MODULE_AUTHOR("Daniel Drake <drake@endlessm.com>"); |
| MODULE_DESCRIPTION("Bluetooth support for Realtek devices ver " VERSION); |
| MODULE_VERSION(VERSION); |
| MODULE_LICENSE("GPL"); |
| MODULE_FIRMWARE("rtl_bt/rtl8723a_fw.bin"); |
| MODULE_FIRMWARE("rtl_bt/rtl8723b_fw.bin"); |
| MODULE_FIRMWARE("rtl_bt/rtl8723b_config.bin"); |
| MODULE_FIRMWARE("rtl_bt/rtl8723bs_fw.bin"); |
| MODULE_FIRMWARE("rtl_bt/rtl8723bs_config.bin"); |
| MODULE_FIRMWARE("rtl_bt/rtl8723ds_fw.bin"); |
| MODULE_FIRMWARE("rtl_bt/rtl8723ds_config.bin"); |
| MODULE_FIRMWARE("rtl_bt/rtl8761a_fw.bin"); |
| MODULE_FIRMWARE("rtl_bt/rtl8761a_config.bin"); |
| MODULE_FIRMWARE("rtl_bt/rtl8821a_fw.bin"); |
| MODULE_FIRMWARE("rtl_bt/rtl8821a_config.bin"); |
| MODULE_FIRMWARE("rtl_bt/rtl8822b_fw.bin"); |
| MODULE_FIRMWARE("rtl_bt/rtl8822b_config.bin"); |