| /* |
| * Copyright (C) 2008 Christian Lamparter <chunkeey@web.de> |
| * Copyright 2008 Johannes Berg <johannes@sipsolutions.net> |
| * |
| * This driver is a port from stlc45xx: |
| * Copyright (C) 2008 Nokia Corporation and/or its subsidiary(-ies). |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA |
| * 02110-1301 USA |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| #include <linux/interrupt.h> |
| #include <linux/firmware.h> |
| #include <linux/delay.h> |
| #include <linux/irq.h> |
| #include <linux/spi/spi.h> |
| #include <linux/etherdevice.h> |
| #include <linux/gpio.h> |
| #include <linux/slab.h> |
| |
| #include "p54spi.h" |
| #include "p54.h" |
| |
| #include "lmac.h" |
| |
| #ifdef CONFIG_P54_SPI_DEFAULT_EEPROM |
| #include "p54spi_eeprom.h" |
| #endif /* CONFIG_P54_SPI_DEFAULT_EEPROM */ |
| |
| MODULE_FIRMWARE("3826.arm"); |
| |
| /* gpios should be handled in board files and provided via platform data, |
| * but because it's currently impossible for p54spi to have a header file |
| * in include/linux, let's use module paramaters for now |
| */ |
| |
| static int p54spi_gpio_power = 97; |
| module_param(p54spi_gpio_power, int, 0444); |
| MODULE_PARM_DESC(p54spi_gpio_power, "gpio number for power line"); |
| |
| static int p54spi_gpio_irq = 87; |
| module_param(p54spi_gpio_irq, int, 0444); |
| MODULE_PARM_DESC(p54spi_gpio_irq, "gpio number for irq line"); |
| |
| static void p54spi_spi_read(struct p54s_priv *priv, u8 address, |
| void *buf, size_t len) |
| { |
| struct spi_transfer t[2]; |
| struct spi_message m; |
| __le16 addr; |
| |
| /* We first push the address */ |
| addr = cpu_to_le16(address << 8 | SPI_ADRS_READ_BIT_15); |
| |
| spi_message_init(&m); |
| memset(t, 0, sizeof(t)); |
| |
| t[0].tx_buf = &addr; |
| t[0].len = sizeof(addr); |
| spi_message_add_tail(&t[0], &m); |
| |
| t[1].rx_buf = buf; |
| t[1].len = len; |
| spi_message_add_tail(&t[1], &m); |
| |
| spi_sync(priv->spi, &m); |
| } |
| |
| |
| static void p54spi_spi_write(struct p54s_priv *priv, u8 address, |
| const void *buf, size_t len) |
| { |
| struct spi_transfer t[3]; |
| struct spi_message m; |
| __le16 addr; |
| |
| /* We first push the address */ |
| addr = cpu_to_le16(address << 8); |
| |
| spi_message_init(&m); |
| memset(t, 0, sizeof(t)); |
| |
| t[0].tx_buf = &addr; |
| t[0].len = sizeof(addr); |
| spi_message_add_tail(&t[0], &m); |
| |
| t[1].tx_buf = buf; |
| t[1].len = len & ~1; |
| spi_message_add_tail(&t[1], &m); |
| |
| if (len % 2) { |
| __le16 last_word; |
| last_word = cpu_to_le16(((u8 *)buf)[len - 1]); |
| |
| t[2].tx_buf = &last_word; |
| t[2].len = sizeof(last_word); |
| spi_message_add_tail(&t[2], &m); |
| } |
| |
| spi_sync(priv->spi, &m); |
| } |
| |
| static u32 p54spi_read32(struct p54s_priv *priv, u8 addr) |
| { |
| __le32 val; |
| |
| p54spi_spi_read(priv, addr, &val, sizeof(val)); |
| |
| return le32_to_cpu(val); |
| } |
| |
| static inline void p54spi_write16(struct p54s_priv *priv, u8 addr, __le16 val) |
| { |
| p54spi_spi_write(priv, addr, &val, sizeof(val)); |
| } |
| |
| static inline void p54spi_write32(struct p54s_priv *priv, u8 addr, __le32 val) |
| { |
| p54spi_spi_write(priv, addr, &val, sizeof(val)); |
| } |
| |
| static int p54spi_wait_bit(struct p54s_priv *priv, u16 reg, u32 bits) |
| { |
| int i; |
| |
| for (i = 0; i < 2000; i++) { |
| u32 buffer = p54spi_read32(priv, reg); |
| if ((buffer & bits) == bits) |
| return 1; |
| } |
| return 0; |
| } |
| |
| static int p54spi_spi_write_dma(struct p54s_priv *priv, __le32 base, |
| const void *buf, size_t len) |
| { |
| if (!p54spi_wait_bit(priv, SPI_ADRS_DMA_WRITE_CTRL, HOST_ALLOWED)) { |
| dev_err(&priv->spi->dev, "spi_write_dma not allowed " |
| "to DMA write.\n"); |
| return -EAGAIN; |
| } |
| |
| p54spi_write16(priv, SPI_ADRS_DMA_WRITE_CTRL, |
| cpu_to_le16(SPI_DMA_WRITE_CTRL_ENABLE)); |
| |
| p54spi_write16(priv, SPI_ADRS_DMA_WRITE_LEN, cpu_to_le16(len)); |
| p54spi_write32(priv, SPI_ADRS_DMA_WRITE_BASE, base); |
| p54spi_spi_write(priv, SPI_ADRS_DMA_DATA, buf, len); |
| return 0; |
| } |
| |
| static int p54spi_request_firmware(struct ieee80211_hw *dev) |
| { |
| struct p54s_priv *priv = dev->priv; |
| int ret; |
| |
| /* FIXME: should driver use it's own struct device? */ |
| ret = request_firmware(&priv->firmware, "3826.arm", &priv->spi->dev); |
| |
| if (ret < 0) { |
| dev_err(&priv->spi->dev, "request_firmware() failed: %d", ret); |
| return ret; |
| } |
| |
| ret = p54_parse_firmware(dev, priv->firmware); |
| if (ret) { |
| release_firmware(priv->firmware); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static int p54spi_request_eeprom(struct ieee80211_hw *dev) |
| { |
| struct p54s_priv *priv = dev->priv; |
| const struct firmware *eeprom; |
| int ret; |
| |
| /* allow users to customize their eeprom. |
| */ |
| |
| ret = request_firmware_direct(&eeprom, "3826.eeprom", &priv->spi->dev); |
| if (ret < 0) { |
| #ifdef CONFIG_P54_SPI_DEFAULT_EEPROM |
| dev_info(&priv->spi->dev, "loading default eeprom...\n"); |
| ret = p54_parse_eeprom(dev, (void *) p54spi_eeprom, |
| sizeof(p54spi_eeprom)); |
| #else |
| dev_err(&priv->spi->dev, "Failed to request user eeprom\n"); |
| #endif /* CONFIG_P54_SPI_DEFAULT_EEPROM */ |
| } else { |
| dev_info(&priv->spi->dev, "loading user eeprom...\n"); |
| ret = p54_parse_eeprom(dev, (void *) eeprom->data, |
| (int)eeprom->size); |
| release_firmware(eeprom); |
| } |
| return ret; |
| } |
| |
| static int p54spi_upload_firmware(struct ieee80211_hw *dev) |
| { |
| struct p54s_priv *priv = dev->priv; |
| unsigned long fw_len, _fw_len; |
| unsigned int offset = 0; |
| int err = 0; |
| u8 *fw; |
| |
| fw_len = priv->firmware->size; |
| fw = kmemdup(priv->firmware->data, fw_len, GFP_KERNEL); |
| if (!fw) |
| return -ENOMEM; |
| |
| /* stop the device */ |
| p54spi_write16(priv, SPI_ADRS_DEV_CTRL_STAT, cpu_to_le16( |
| SPI_CTRL_STAT_HOST_OVERRIDE | SPI_CTRL_STAT_HOST_RESET | |
| SPI_CTRL_STAT_START_HALTED)); |
| |
| msleep(TARGET_BOOT_SLEEP); |
| |
| p54spi_write16(priv, SPI_ADRS_DEV_CTRL_STAT, cpu_to_le16( |
| SPI_CTRL_STAT_HOST_OVERRIDE | |
| SPI_CTRL_STAT_START_HALTED)); |
| |
| msleep(TARGET_BOOT_SLEEP); |
| |
| while (fw_len > 0) { |
| _fw_len = min_t(long, fw_len, SPI_MAX_PACKET_SIZE); |
| |
| err = p54spi_spi_write_dma(priv, cpu_to_le32( |
| ISL38XX_DEV_FIRMWARE_ADDR + offset), |
| (fw + offset), _fw_len); |
| if (err < 0) |
| goto out; |
| |
| fw_len -= _fw_len; |
| offset += _fw_len; |
| } |
| |
| BUG_ON(fw_len != 0); |
| |
| /* enable host interrupts */ |
| p54spi_write32(priv, SPI_ADRS_HOST_INT_EN, |
| cpu_to_le32(SPI_HOST_INTS_DEFAULT)); |
| |
| /* boot the device */ |
| p54spi_write16(priv, SPI_ADRS_DEV_CTRL_STAT, cpu_to_le16( |
| SPI_CTRL_STAT_HOST_OVERRIDE | SPI_CTRL_STAT_HOST_RESET | |
| SPI_CTRL_STAT_RAM_BOOT)); |
| |
| msleep(TARGET_BOOT_SLEEP); |
| |
| p54spi_write16(priv, SPI_ADRS_DEV_CTRL_STAT, cpu_to_le16( |
| SPI_CTRL_STAT_HOST_OVERRIDE | SPI_CTRL_STAT_RAM_BOOT)); |
| msleep(TARGET_BOOT_SLEEP); |
| |
| out: |
| kfree(fw); |
| return err; |
| } |
| |
| static void p54spi_power_off(struct p54s_priv *priv) |
| { |
| disable_irq(gpio_to_irq(p54spi_gpio_irq)); |
| gpio_set_value(p54spi_gpio_power, 0); |
| } |
| |
| static void p54spi_power_on(struct p54s_priv *priv) |
| { |
| gpio_set_value(p54spi_gpio_power, 1); |
| enable_irq(gpio_to_irq(p54spi_gpio_irq)); |
| |
| /* need to wait a while before device can be accessed, the length |
| * is just a guess |
| */ |
| msleep(10); |
| } |
| |
| static inline void p54spi_int_ack(struct p54s_priv *priv, u32 val) |
| { |
| p54spi_write32(priv, SPI_ADRS_HOST_INT_ACK, cpu_to_le32(val)); |
| } |
| |
| static int p54spi_wakeup(struct p54s_priv *priv) |
| { |
| /* wake the chip */ |
| p54spi_write32(priv, SPI_ADRS_ARM_INTERRUPTS, |
| cpu_to_le32(SPI_TARGET_INT_WAKEUP)); |
| |
| /* And wait for the READY interrupt */ |
| if (!p54spi_wait_bit(priv, SPI_ADRS_HOST_INTERRUPTS, |
| SPI_HOST_INT_READY)) { |
| dev_err(&priv->spi->dev, "INT_READY timeout\n"); |
| return -EBUSY; |
| } |
| |
| p54spi_int_ack(priv, SPI_HOST_INT_READY); |
| return 0; |
| } |
| |
| static inline void p54spi_sleep(struct p54s_priv *priv) |
| { |
| p54spi_write32(priv, SPI_ADRS_ARM_INTERRUPTS, |
| cpu_to_le32(SPI_TARGET_INT_SLEEP)); |
| } |
| |
| static void p54spi_int_ready(struct p54s_priv *priv) |
| { |
| p54spi_write32(priv, SPI_ADRS_HOST_INT_EN, cpu_to_le32( |
| SPI_HOST_INT_UPDATE | SPI_HOST_INT_SW_UPDATE)); |
| |
| switch (priv->fw_state) { |
| case FW_STATE_BOOTING: |
| priv->fw_state = FW_STATE_READY; |
| complete(&priv->fw_comp); |
| break; |
| case FW_STATE_RESETTING: |
| priv->fw_state = FW_STATE_READY; |
| /* TODO: reinitialize state */ |
| break; |
| default: |
| break; |
| } |
| } |
| |
| static int p54spi_rx(struct p54s_priv *priv) |
| { |
| struct sk_buff *skb; |
| u16 len; |
| u16 rx_head[2]; |
| #define READAHEAD_SZ (sizeof(rx_head)-sizeof(u16)) |
| |
| if (p54spi_wakeup(priv) < 0) |
| return -EBUSY; |
| |
| /* Read data size and first data word in one SPI transaction |
| * This is workaround for firmware/DMA bug, |
| * when first data word gets lost under high load. |
| */ |
| p54spi_spi_read(priv, SPI_ADRS_DMA_DATA, rx_head, sizeof(rx_head)); |
| len = rx_head[0]; |
| |
| if (len == 0) { |
| p54spi_sleep(priv); |
| dev_err(&priv->spi->dev, "rx request of zero bytes\n"); |
| return 0; |
| } |
| |
| /* Firmware may insert up to 4 padding bytes after the lmac header, |
| * but it does not amend the size of SPI data transfer. |
| * Such packets has correct data size in header, thus referencing |
| * past the end of allocated skb. Reserve extra 4 bytes for this case |
| */ |
| skb = dev_alloc_skb(len + 4); |
| if (!skb) { |
| p54spi_sleep(priv); |
| dev_err(&priv->spi->dev, "could not alloc skb"); |
| return -ENOMEM; |
| } |
| |
| if (len <= READAHEAD_SZ) { |
| skb_put_data(skb, rx_head + 1, len); |
| } else { |
| skb_put_data(skb, rx_head + 1, READAHEAD_SZ); |
| p54spi_spi_read(priv, SPI_ADRS_DMA_DATA, |
| skb_put(skb, len - READAHEAD_SZ), |
| len - READAHEAD_SZ); |
| } |
| p54spi_sleep(priv); |
| /* Put additional bytes to compensate for the possible |
| * alignment-caused truncation |
| */ |
| skb_put(skb, 4); |
| |
| if (p54_rx(priv->hw, skb) == 0) |
| dev_kfree_skb(skb); |
| |
| return 0; |
| } |
| |
| |
| static irqreturn_t p54spi_interrupt(int irq, void *config) |
| { |
| struct spi_device *spi = config; |
| struct p54s_priv *priv = spi_get_drvdata(spi); |
| |
| ieee80211_queue_work(priv->hw, &priv->work); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int p54spi_tx_frame(struct p54s_priv *priv, struct sk_buff *skb) |
| { |
| struct p54_hdr *hdr = (struct p54_hdr *) skb->data; |
| int ret = 0; |
| |
| if (p54spi_wakeup(priv) < 0) |
| return -EBUSY; |
| |
| ret = p54spi_spi_write_dma(priv, hdr->req_id, skb->data, skb->len); |
| if (ret < 0) |
| goto out; |
| |
| if (!p54spi_wait_bit(priv, SPI_ADRS_HOST_INTERRUPTS, |
| SPI_HOST_INT_WR_READY)) { |
| dev_err(&priv->spi->dev, "WR_READY timeout\n"); |
| ret = -EAGAIN; |
| goto out; |
| } |
| |
| p54spi_int_ack(priv, SPI_HOST_INT_WR_READY); |
| |
| if (FREE_AFTER_TX(skb)) |
| p54_free_skb(priv->hw, skb); |
| out: |
| p54spi_sleep(priv); |
| return ret; |
| } |
| |
| static int p54spi_wq_tx(struct p54s_priv *priv) |
| { |
| struct p54s_tx_info *entry; |
| struct sk_buff *skb; |
| struct ieee80211_tx_info *info; |
| struct p54_tx_info *minfo; |
| struct p54s_tx_info *dinfo; |
| unsigned long flags; |
| int ret = 0; |
| |
| spin_lock_irqsave(&priv->tx_lock, flags); |
| |
| while (!list_empty(&priv->tx_pending)) { |
| entry = list_entry(priv->tx_pending.next, |
| struct p54s_tx_info, tx_list); |
| |
| list_del_init(&entry->tx_list); |
| |
| spin_unlock_irqrestore(&priv->tx_lock, flags); |
| |
| dinfo = container_of((void *) entry, struct p54s_tx_info, |
| tx_list); |
| minfo = container_of((void *) dinfo, struct p54_tx_info, |
| data); |
| info = container_of((void *) minfo, struct ieee80211_tx_info, |
| rate_driver_data); |
| skb = container_of((void *) info, struct sk_buff, cb); |
| |
| ret = p54spi_tx_frame(priv, skb); |
| |
| if (ret < 0) { |
| p54_free_skb(priv->hw, skb); |
| return ret; |
| } |
| |
| spin_lock_irqsave(&priv->tx_lock, flags); |
| } |
| spin_unlock_irqrestore(&priv->tx_lock, flags); |
| return ret; |
| } |
| |
| static void p54spi_op_tx(struct ieee80211_hw *dev, struct sk_buff *skb) |
| { |
| struct p54s_priv *priv = dev->priv; |
| struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); |
| struct p54_tx_info *mi = (struct p54_tx_info *) info->rate_driver_data; |
| struct p54s_tx_info *di = (struct p54s_tx_info *) mi->data; |
| unsigned long flags; |
| |
| BUILD_BUG_ON(sizeof(*di) > sizeof((mi->data))); |
| |
| spin_lock_irqsave(&priv->tx_lock, flags); |
| list_add_tail(&di->tx_list, &priv->tx_pending); |
| spin_unlock_irqrestore(&priv->tx_lock, flags); |
| |
| ieee80211_queue_work(priv->hw, &priv->work); |
| } |
| |
| static void p54spi_work(struct work_struct *work) |
| { |
| struct p54s_priv *priv = container_of(work, struct p54s_priv, work); |
| u32 ints; |
| int ret; |
| |
| mutex_lock(&priv->mutex); |
| |
| if (priv->fw_state == FW_STATE_OFF) |
| goto out; |
| |
| ints = p54spi_read32(priv, SPI_ADRS_HOST_INTERRUPTS); |
| |
| if (ints & SPI_HOST_INT_READY) { |
| p54spi_int_ready(priv); |
| p54spi_int_ack(priv, SPI_HOST_INT_READY); |
| } |
| |
| if (priv->fw_state != FW_STATE_READY) |
| goto out; |
| |
| if (ints & SPI_HOST_INT_UPDATE) { |
| p54spi_int_ack(priv, SPI_HOST_INT_UPDATE); |
| ret = p54spi_rx(priv); |
| if (ret < 0) |
| goto out; |
| } |
| if (ints & SPI_HOST_INT_SW_UPDATE) { |
| p54spi_int_ack(priv, SPI_HOST_INT_SW_UPDATE); |
| ret = p54spi_rx(priv); |
| if (ret < 0) |
| goto out; |
| } |
| |
| ret = p54spi_wq_tx(priv); |
| out: |
| mutex_unlock(&priv->mutex); |
| } |
| |
| static int p54spi_op_start(struct ieee80211_hw *dev) |
| { |
| struct p54s_priv *priv = dev->priv; |
| unsigned long timeout; |
| int ret = 0; |
| |
| if (mutex_lock_interruptible(&priv->mutex)) { |
| ret = -EINTR; |
| goto out; |
| } |
| |
| priv->fw_state = FW_STATE_BOOTING; |
| |
| p54spi_power_on(priv); |
| |
| ret = p54spi_upload_firmware(dev); |
| if (ret < 0) { |
| p54spi_power_off(priv); |
| goto out_unlock; |
| } |
| |
| mutex_unlock(&priv->mutex); |
| |
| timeout = msecs_to_jiffies(2000); |
| timeout = wait_for_completion_interruptible_timeout(&priv->fw_comp, |
| timeout); |
| if (!timeout) { |
| dev_err(&priv->spi->dev, "firmware boot failed"); |
| p54spi_power_off(priv); |
| ret = -1; |
| goto out; |
| } |
| |
| if (mutex_lock_interruptible(&priv->mutex)) { |
| ret = -EINTR; |
| p54spi_power_off(priv); |
| goto out; |
| } |
| |
| WARN_ON(priv->fw_state != FW_STATE_READY); |
| |
| out_unlock: |
| mutex_unlock(&priv->mutex); |
| |
| out: |
| return ret; |
| } |
| |
| static void p54spi_op_stop(struct ieee80211_hw *dev) |
| { |
| struct p54s_priv *priv = dev->priv; |
| unsigned long flags; |
| |
| mutex_lock(&priv->mutex); |
| WARN_ON(priv->fw_state != FW_STATE_READY); |
| |
| p54spi_power_off(priv); |
| spin_lock_irqsave(&priv->tx_lock, flags); |
| INIT_LIST_HEAD(&priv->tx_pending); |
| spin_unlock_irqrestore(&priv->tx_lock, flags); |
| |
| priv->fw_state = FW_STATE_OFF; |
| mutex_unlock(&priv->mutex); |
| |
| cancel_work_sync(&priv->work); |
| } |
| |
| static int p54spi_probe(struct spi_device *spi) |
| { |
| struct p54s_priv *priv = NULL; |
| struct ieee80211_hw *hw; |
| int ret = -EINVAL; |
| |
| hw = p54_init_common(sizeof(*priv)); |
| if (!hw) { |
| dev_err(&spi->dev, "could not alloc ieee80211_hw"); |
| return -ENOMEM; |
| } |
| |
| priv = hw->priv; |
| priv->hw = hw; |
| spi_set_drvdata(spi, priv); |
| priv->spi = spi; |
| |
| spi->bits_per_word = 16; |
| spi->max_speed_hz = 24000000; |
| |
| ret = spi_setup(spi); |
| if (ret < 0) { |
| dev_err(&priv->spi->dev, "spi_setup failed"); |
| goto err_free; |
| } |
| |
| ret = gpio_request(p54spi_gpio_power, "p54spi power"); |
| if (ret < 0) { |
| dev_err(&priv->spi->dev, "power GPIO request failed: %d", ret); |
| goto err_free; |
| } |
| |
| ret = gpio_request(p54spi_gpio_irq, "p54spi irq"); |
| if (ret < 0) { |
| dev_err(&priv->spi->dev, "irq GPIO request failed: %d", ret); |
| goto err_free_gpio_power; |
| } |
| |
| gpio_direction_output(p54spi_gpio_power, 0); |
| gpio_direction_input(p54spi_gpio_irq); |
| |
| ret = request_irq(gpio_to_irq(p54spi_gpio_irq), |
| p54spi_interrupt, 0, "p54spi", |
| priv->spi); |
| if (ret < 0) { |
| dev_err(&priv->spi->dev, "request_irq() failed"); |
| goto err_free_gpio_irq; |
| } |
| |
| irq_set_irq_type(gpio_to_irq(p54spi_gpio_irq), IRQ_TYPE_EDGE_RISING); |
| |
| disable_irq(gpio_to_irq(p54spi_gpio_irq)); |
| |
| INIT_WORK(&priv->work, p54spi_work); |
| init_completion(&priv->fw_comp); |
| INIT_LIST_HEAD(&priv->tx_pending); |
| mutex_init(&priv->mutex); |
| spin_lock_init(&priv->tx_lock); |
| SET_IEEE80211_DEV(hw, &spi->dev); |
| priv->common.open = p54spi_op_start; |
| priv->common.stop = p54spi_op_stop; |
| priv->common.tx = p54spi_op_tx; |
| |
| ret = p54spi_request_firmware(hw); |
| if (ret < 0) |
| goto err_free_common; |
| |
| ret = p54spi_request_eeprom(hw); |
| if (ret) |
| goto err_free_common; |
| |
| ret = p54_register_common(hw, &priv->spi->dev); |
| if (ret) |
| goto err_free_common; |
| |
| return 0; |
| |
| err_free_common: |
| free_irq(gpio_to_irq(p54spi_gpio_irq), spi); |
| err_free_gpio_irq: |
| gpio_free(p54spi_gpio_irq); |
| err_free_gpio_power: |
| gpio_free(p54spi_gpio_power); |
| err_free: |
| p54_free_common(priv->hw); |
| return ret; |
| } |
| |
| static int p54spi_remove(struct spi_device *spi) |
| { |
| struct p54s_priv *priv = spi_get_drvdata(spi); |
| |
| p54_unregister_common(priv->hw); |
| |
| free_irq(gpio_to_irq(p54spi_gpio_irq), spi); |
| |
| gpio_free(p54spi_gpio_power); |
| gpio_free(p54spi_gpio_irq); |
| release_firmware(priv->firmware); |
| |
| mutex_destroy(&priv->mutex); |
| |
| p54_free_common(priv->hw); |
| |
| return 0; |
| } |
| |
| |
| static struct spi_driver p54spi_driver = { |
| .driver = { |
| .name = "p54spi", |
| }, |
| |
| .probe = p54spi_probe, |
| .remove = p54spi_remove, |
| }; |
| |
| module_spi_driver(p54spi_driver); |
| |
| MODULE_LICENSE("GPL"); |
| MODULE_AUTHOR("Christian Lamparter <chunkeey@web.de>"); |
| MODULE_ALIAS("spi:cx3110x"); |
| MODULE_ALIAS("spi:p54spi"); |
| MODULE_ALIAS("spi:stlc45xx"); |