| /* |
| * Copyright (C) 1991, 1992 Linus Torvalds |
| * Copyright (C) 2000, 2001, 2002 Andi Kleen, SuSE Labs |
| * |
| * Pentium III FXSR, SSE support |
| * Gareth Hughes <gareth@valinux.com>, May 2000 |
| */ |
| |
| /* |
| * 'Traps.c' handles hardware traps and faults after we have saved some |
| * state in 'asm.s'. |
| */ |
| #include <linux/interrupt.h> |
| #include <linux/kallsyms.h> |
| #include <linux/spinlock.h> |
| #include <linux/highmem.h> |
| #include <linux/kprobes.h> |
| #include <linux/uaccess.h> |
| #include <linux/utsname.h> |
| #include <linux/kdebug.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/ptrace.h> |
| #include <linux/string.h> |
| #include <linux/unwind.h> |
| #include <linux/delay.h> |
| #include <linux/errno.h> |
| #include <linux/kexec.h> |
| #include <linux/sched.h> |
| #include <linux/timer.h> |
| #include <linux/init.h> |
| #include <linux/bug.h> |
| #include <linux/nmi.h> |
| #include <linux/mm.h> |
| |
| #ifdef CONFIG_EISA |
| #include <linux/ioport.h> |
| #include <linux/eisa.h> |
| #endif |
| |
| #ifdef CONFIG_MCA |
| #include <linux/mca.h> |
| #endif |
| |
| #if defined(CONFIG_EDAC) |
| #include <linux/edac.h> |
| #endif |
| |
| #include <asm/processor-flags.h> |
| #include <asm/arch_hooks.h> |
| #include <asm/stacktrace.h> |
| #include <asm/processor.h> |
| #include <asm/debugreg.h> |
| #include <asm/atomic.h> |
| #include <asm/system.h> |
| #include <asm/unwind.h> |
| #include <asm/desc.h> |
| #include <asm/i387.h> |
| #include <asm/nmi.h> |
| #include <asm/smp.h> |
| #include <asm/io.h> |
| #include <asm/traps.h> |
| |
| #include "mach_traps.h" |
| #include "cpu/mcheck/mce.h" |
| |
| DECLARE_BITMAP(used_vectors, NR_VECTORS); |
| EXPORT_SYMBOL_GPL(used_vectors); |
| |
| asmlinkage int system_call(void); |
| |
| /* Do we ignore FPU interrupts ? */ |
| char ignore_fpu_irq; |
| |
| /* |
| * The IDT has to be page-aligned to simplify the Pentium |
| * F0 0F bug workaround.. We have a special link segment |
| * for this. |
| */ |
| gate_desc idt_table[256] |
| __attribute__((__section__(".data.idt"))) = { { { { 0, 0 } } }, }; |
| |
| int panic_on_unrecovered_nmi; |
| int kstack_depth_to_print = 24; |
| static unsigned int code_bytes = 64; |
| static int ignore_nmis; |
| static int die_counter; |
| |
| static inline void conditional_sti(struct pt_regs *regs) |
| { |
| if (regs->flags & X86_EFLAGS_IF) |
| local_irq_enable(); |
| } |
| |
| void printk_address(unsigned long address, int reliable) |
| { |
| #ifdef CONFIG_KALLSYMS |
| unsigned long offset = 0; |
| unsigned long symsize; |
| const char *symname; |
| char *modname; |
| char *delim = ":"; |
| char namebuf[KSYM_NAME_LEN]; |
| char reliab[4] = ""; |
| |
| symname = kallsyms_lookup(address, &symsize, &offset, |
| &modname, namebuf); |
| if (!symname) { |
| printk(" [<%08lx>]\n", address); |
| return; |
| } |
| if (!reliable) |
| strcpy(reliab, "? "); |
| |
| if (!modname) |
| modname = delim = ""; |
| printk(" [<%08lx>] %s%s%s%s%s+0x%lx/0x%lx\n", |
| address, reliab, delim, modname, delim, symname, offset, symsize); |
| #else |
| printk(" [<%08lx>]\n", address); |
| #endif |
| } |
| |
| static inline int valid_stack_ptr(struct thread_info *tinfo, |
| void *p, unsigned int size) |
| { |
| void *t = tinfo; |
| return p > t && p <= t + THREAD_SIZE - size; |
| } |
| |
| /* The form of the top of the frame on the stack */ |
| struct stack_frame { |
| struct stack_frame *next_frame; |
| unsigned long return_address; |
| }; |
| |
| static inline unsigned long |
| print_context_stack(struct thread_info *tinfo, |
| unsigned long *stack, unsigned long bp, |
| const struct stacktrace_ops *ops, void *data) |
| { |
| struct stack_frame *frame = (struct stack_frame *)bp; |
| |
| while (valid_stack_ptr(tinfo, stack, sizeof(*stack))) { |
| unsigned long addr; |
| |
| addr = *stack; |
| if (__kernel_text_address(addr)) { |
| if ((unsigned long) stack == bp + 4) { |
| ops->address(data, addr, 1); |
| frame = frame->next_frame; |
| bp = (unsigned long) frame; |
| } else { |
| ops->address(data, addr, bp == 0); |
| } |
| } |
| stack++; |
| } |
| return bp; |
| } |
| |
| void dump_trace(struct task_struct *task, struct pt_regs *regs, |
| unsigned long *stack, unsigned long bp, |
| const struct stacktrace_ops *ops, void *data) |
| { |
| if (!task) |
| task = current; |
| |
| if (!stack) { |
| unsigned long dummy; |
| stack = &dummy; |
| if (task != current) |
| stack = (unsigned long *)task->thread.sp; |
| } |
| |
| #ifdef CONFIG_FRAME_POINTER |
| if (!bp) { |
| if (task == current) { |
| /* Grab bp right from our regs */ |
| asm("movl %%ebp, %0" : "=r" (bp) :); |
| } else { |
| /* bp is the last reg pushed by switch_to */ |
| bp = *(unsigned long *) task->thread.sp; |
| } |
| } |
| #endif |
| |
| for (;;) { |
| struct thread_info *context; |
| |
| context = (struct thread_info *) |
| ((unsigned long)stack & (~(THREAD_SIZE - 1))); |
| bp = print_context_stack(context, stack, bp, ops, data); |
| /* |
| * Should be after the line below, but somewhere |
| * in early boot context comes out corrupted and we |
| * can't reference it: |
| */ |
| if (ops->stack(data, "IRQ") < 0) |
| break; |
| stack = (unsigned long *)context->previous_esp; |
| if (!stack) |
| break; |
| touch_nmi_watchdog(); |
| } |
| } |
| EXPORT_SYMBOL(dump_trace); |
| |
| static void |
| print_trace_warning_symbol(void *data, char *msg, unsigned long symbol) |
| { |
| printk(data); |
| print_symbol(msg, symbol); |
| printk("\n"); |
| } |
| |
| static void print_trace_warning(void *data, char *msg) |
| { |
| printk("%s%s\n", (char *)data, msg); |
| } |
| |
| static int print_trace_stack(void *data, char *name) |
| { |
| return 0; |
| } |
| |
| /* |
| * Print one address/symbol entries per line. |
| */ |
| static void print_trace_address(void *data, unsigned long addr, int reliable) |
| { |
| printk("%s [<%08lx>] ", (char *)data, addr); |
| if (!reliable) |
| printk("? "); |
| print_symbol("%s\n", addr); |
| touch_nmi_watchdog(); |
| } |
| |
| static const struct stacktrace_ops print_trace_ops = { |
| .warning = print_trace_warning, |
| .warning_symbol = print_trace_warning_symbol, |
| .stack = print_trace_stack, |
| .address = print_trace_address, |
| }; |
| |
| static void |
| show_trace_log_lvl(struct task_struct *task, struct pt_regs *regs, |
| unsigned long *stack, unsigned long bp, char *log_lvl) |
| { |
| dump_trace(task, regs, stack, bp, &print_trace_ops, log_lvl); |
| printk("%s =======================\n", log_lvl); |
| } |
| |
| void show_trace(struct task_struct *task, struct pt_regs *regs, |
| unsigned long *stack, unsigned long bp) |
| { |
| show_trace_log_lvl(task, regs, stack, bp, ""); |
| } |
| |
| static void |
| show_stack_log_lvl(struct task_struct *task, struct pt_regs *regs, |
| unsigned long *sp, unsigned long bp, char *log_lvl) |
| { |
| unsigned long *stack; |
| int i; |
| |
| if (sp == NULL) { |
| if (task) |
| sp = (unsigned long *)task->thread.sp; |
| else |
| sp = (unsigned long *)&sp; |
| } |
| |
| stack = sp; |
| for (i = 0; i < kstack_depth_to_print; i++) { |
| if (kstack_end(stack)) |
| break; |
| if (i && ((i % 8) == 0)) |
| printk("\n%s ", log_lvl); |
| printk("%08lx ", *stack++); |
| } |
| printk("\n%sCall Trace:\n", log_lvl); |
| |
| show_trace_log_lvl(task, regs, sp, bp, log_lvl); |
| } |
| |
| void show_stack(struct task_struct *task, unsigned long *sp) |
| { |
| printk(" "); |
| show_stack_log_lvl(task, NULL, sp, 0, ""); |
| } |
| |
| /* |
| * The architecture-independent dump_stack generator |
| */ |
| void dump_stack(void) |
| { |
| unsigned long bp = 0; |
| unsigned long stack; |
| |
| #ifdef CONFIG_FRAME_POINTER |
| if (!bp) |
| asm("movl %%ebp, %0" : "=r" (bp):); |
| #endif |
| |
| printk("Pid: %d, comm: %.20s %s %s %.*s\n", |
| current->pid, current->comm, print_tainted(), |
| init_utsname()->release, |
| (int)strcspn(init_utsname()->version, " "), |
| init_utsname()->version); |
| |
| show_trace(current, NULL, &stack, bp); |
| } |
| |
| EXPORT_SYMBOL(dump_stack); |
| |
| void show_registers(struct pt_regs *regs) |
| { |
| int i; |
| |
| print_modules(); |
| __show_registers(regs, 0); |
| |
| printk(KERN_EMERG "Process %.*s (pid: %d, ti=%p task=%p task.ti=%p)", |
| TASK_COMM_LEN, current->comm, task_pid_nr(current), |
| current_thread_info(), current, task_thread_info(current)); |
| /* |
| * When in-kernel, we also print out the stack and code at the |
| * time of the fault.. |
| */ |
| if (!user_mode_vm(regs)) { |
| unsigned int code_prologue = code_bytes * 43 / 64; |
| unsigned int code_len = code_bytes; |
| unsigned char c; |
| u8 *ip; |
| |
| printk("\n" KERN_EMERG "Stack: "); |
| show_stack_log_lvl(NULL, regs, ®s->sp, 0, KERN_EMERG); |
| |
| printk(KERN_EMERG "Code: "); |
| |
| ip = (u8 *)regs->ip - code_prologue; |
| if (ip < (u8 *)PAGE_OFFSET || probe_kernel_address(ip, c)) { |
| /* try starting at EIP */ |
| ip = (u8 *)regs->ip; |
| code_len = code_len - code_prologue + 1; |
| } |
| for (i = 0; i < code_len; i++, ip++) { |
| if (ip < (u8 *)PAGE_OFFSET || |
| probe_kernel_address(ip, c)) { |
| printk(" Bad EIP value."); |
| break; |
| } |
| if (ip == (u8 *)regs->ip) |
| printk("<%02x> ", c); |
| else |
| printk("%02x ", c); |
| } |
| } |
| printk("\n"); |
| } |
| |
| int is_valid_bugaddr(unsigned long ip) |
| { |
| unsigned short ud2; |
| |
| if (ip < PAGE_OFFSET) |
| return 0; |
| if (probe_kernel_address((unsigned short *)ip, ud2)) |
| return 0; |
| |
| return ud2 == 0x0b0f; |
| } |
| |
| static raw_spinlock_t die_lock = __RAW_SPIN_LOCK_UNLOCKED; |
| static int die_owner = -1; |
| static unsigned int die_nest_count; |
| |
| unsigned __kprobes long oops_begin(void) |
| { |
| unsigned long flags; |
| |
| oops_enter(); |
| |
| if (die_owner != raw_smp_processor_id()) { |
| console_verbose(); |
| raw_local_irq_save(flags); |
| __raw_spin_lock(&die_lock); |
| die_owner = smp_processor_id(); |
| die_nest_count = 0; |
| bust_spinlocks(1); |
| } else { |
| raw_local_irq_save(flags); |
| } |
| die_nest_count++; |
| return flags; |
| } |
| |
| void __kprobes oops_end(unsigned long flags, struct pt_regs *regs, int signr) |
| { |
| bust_spinlocks(0); |
| die_owner = -1; |
| add_taint(TAINT_DIE); |
| __raw_spin_unlock(&die_lock); |
| raw_local_irq_restore(flags); |
| |
| if (!regs) |
| return; |
| |
| if (kexec_should_crash(current)) |
| crash_kexec(regs); |
| |
| if (in_interrupt()) |
| panic("Fatal exception in interrupt"); |
| |
| if (panic_on_oops) |
| panic("Fatal exception"); |
| |
| oops_exit(); |
| do_exit(signr); |
| } |
| |
| int __kprobes __die(const char *str, struct pt_regs *regs, long err) |
| { |
| unsigned short ss; |
| unsigned long sp; |
| |
| printk(KERN_EMERG "%s: %04lx [#%d] ", str, err & 0xffff, ++die_counter); |
| #ifdef CONFIG_PREEMPT |
| printk("PREEMPT "); |
| #endif |
| #ifdef CONFIG_SMP |
| printk("SMP "); |
| #endif |
| #ifdef CONFIG_DEBUG_PAGEALLOC |
| printk("DEBUG_PAGEALLOC"); |
| #endif |
| printk("\n"); |
| if (notify_die(DIE_OOPS, str, regs, err, |
| current->thread.trap_no, SIGSEGV) == NOTIFY_STOP) |
| return 1; |
| |
| show_registers(regs); |
| /* Executive summary in case the oops scrolled away */ |
| sp = (unsigned long) (®s->sp); |
| savesegment(ss, ss); |
| if (user_mode(regs)) { |
| sp = regs->sp; |
| ss = regs->ss & 0xffff; |
| } |
| printk(KERN_EMERG "EIP: [<%08lx>] ", regs->ip); |
| print_symbol("%s", regs->ip); |
| printk(" SS:ESP %04x:%08lx\n", ss, sp); |
| return 0; |
| } |
| |
| /* |
| * This is gone through when something in the kernel has done something bad |
| * and is about to be terminated: |
| */ |
| void die(const char *str, struct pt_regs *regs, long err) |
| { |
| unsigned long flags = oops_begin(); |
| |
| if (die_nest_count < 3) { |
| report_bug(regs->ip, regs); |
| |
| if (__die(str, regs, err)) |
| regs = NULL; |
| } else { |
| printk(KERN_EMERG "Recursive die() failure, output suppressed\n"); |
| } |
| |
| oops_end(flags, regs, SIGSEGV); |
| } |
| |
| static inline void |
| die_if_kernel(const char *str, struct pt_regs *regs, long err) |
| { |
| if (!user_mode_vm(regs)) |
| die(str, regs, err); |
| } |
| |
| static void __kprobes |
| do_trap(int trapnr, int signr, char *str, int vm86, struct pt_regs *regs, |
| long error_code, siginfo_t *info) |
| { |
| struct task_struct *tsk = current; |
| |
| if (regs->flags & X86_VM_MASK) { |
| if (vm86) |
| goto vm86_trap; |
| goto trap_signal; |
| } |
| |
| if (!user_mode(regs)) |
| goto kernel_trap; |
| |
| trap_signal: |
| /* |
| * We want error_code and trap_no set for userspace faults and |
| * kernelspace faults which result in die(), but not |
| * kernelspace faults which are fixed up. die() gives the |
| * process no chance to handle the signal and notice the |
| * kernel fault information, so that won't result in polluting |
| * the information about previously queued, but not yet |
| * delivered, faults. See also do_general_protection below. |
| */ |
| tsk->thread.error_code = error_code; |
| tsk->thread.trap_no = trapnr; |
| |
| if (info) |
| force_sig_info(signr, info, tsk); |
| else |
| force_sig(signr, tsk); |
| return; |
| |
| kernel_trap: |
| if (!fixup_exception(regs)) { |
| tsk->thread.error_code = error_code; |
| tsk->thread.trap_no = trapnr; |
| die(str, regs, error_code); |
| } |
| return; |
| |
| vm86_trap: |
| if (handle_vm86_trap((struct kernel_vm86_regs *) regs, |
| error_code, trapnr)) |
| goto trap_signal; |
| return; |
| } |
| |
| #define DO_ERROR(trapnr, signr, str, name) \ |
| void do_##name(struct pt_regs *regs, long error_code) \ |
| { \ |
| if (notify_die(DIE_TRAP, str, regs, error_code, trapnr, signr) \ |
| == NOTIFY_STOP) \ |
| return; \ |
| conditional_sti(regs); \ |
| do_trap(trapnr, signr, str, 0, regs, error_code, NULL); \ |
| } |
| |
| #define DO_ERROR_INFO(trapnr, signr, str, name, sicode, siaddr, irq) \ |
| void do_##name(struct pt_regs *regs, long error_code) \ |
| { \ |
| siginfo_t info; \ |
| if (irq) \ |
| local_irq_enable(); \ |
| info.si_signo = signr; \ |
| info.si_errno = 0; \ |
| info.si_code = sicode; \ |
| info.si_addr = (void __user *)siaddr; \ |
| if (notify_die(DIE_TRAP, str, regs, error_code, trapnr, signr) \ |
| == NOTIFY_STOP) \ |
| return; \ |
| conditional_sti(regs); \ |
| do_trap(trapnr, signr, str, 0, regs, error_code, &info); \ |
| } |
| |
| #define DO_VM86_ERROR(trapnr, signr, str, name) \ |
| void do_##name(struct pt_regs *regs, long error_code) \ |
| { \ |
| if (notify_die(DIE_TRAP, str, regs, error_code, trapnr, signr) \ |
| == NOTIFY_STOP) \ |
| return; \ |
| conditional_sti(regs); \ |
| do_trap(trapnr, signr, str, 1, regs, error_code, NULL); \ |
| } |
| |
| #define DO_VM86_ERROR_INFO(trapnr, signr, str, name, sicode, siaddr) \ |
| void do_##name(struct pt_regs *regs, long error_code) \ |
| { \ |
| siginfo_t info; \ |
| info.si_signo = signr; \ |
| info.si_errno = 0; \ |
| info.si_code = sicode; \ |
| info.si_addr = (void __user *)siaddr; \ |
| if (notify_die(DIE_TRAP, str, regs, error_code, trapnr, signr) \ |
| == NOTIFY_STOP) \ |
| return; \ |
| conditional_sti(regs); \ |
| do_trap(trapnr, signr, str, 1, regs, error_code, &info); \ |
| } |
| |
| DO_VM86_ERROR_INFO(0, SIGFPE, "divide error", divide_error, FPE_INTDIV, regs->ip) |
| DO_VM86_ERROR(4, SIGSEGV, "overflow", overflow) |
| DO_VM86_ERROR(5, SIGSEGV, "bounds", bounds) |
| DO_ERROR_INFO(6, SIGILL, "invalid opcode", invalid_op, ILL_ILLOPN, regs->ip, 0) |
| DO_ERROR(9, SIGFPE, "coprocessor segment overrun", coprocessor_segment_overrun) |
| DO_ERROR(10, SIGSEGV, "invalid TSS", invalid_TSS) |
| DO_ERROR(11, SIGBUS, "segment not present", segment_not_present) |
| DO_ERROR(12, SIGBUS, "stack segment", stack_segment) |
| DO_ERROR_INFO(17, SIGBUS, "alignment check", alignment_check, BUS_ADRALN, 0, 0) |
| |
| void __kprobes |
| do_general_protection(struct pt_regs *regs, long error_code) |
| { |
| struct task_struct *tsk; |
| struct thread_struct *thread; |
| struct tss_struct *tss; |
| int cpu; |
| |
| conditional_sti(regs); |
| |
| cpu = get_cpu(); |
| tss = &per_cpu(init_tss, cpu); |
| thread = ¤t->thread; |
| |
| /* |
| * Perform the lazy TSS's I/O bitmap copy. If the TSS has an |
| * invalid offset set (the LAZY one) and the faulting thread has |
| * a valid I/O bitmap pointer, we copy the I/O bitmap in the TSS |
| * and we set the offset field correctly. Then we let the CPU to |
| * restart the faulting instruction. |
| */ |
| if (tss->x86_tss.io_bitmap_base == INVALID_IO_BITMAP_OFFSET_LAZY && |
| thread->io_bitmap_ptr) { |
| memcpy(tss->io_bitmap, thread->io_bitmap_ptr, |
| thread->io_bitmap_max); |
| /* |
| * If the previously set map was extending to higher ports |
| * than the current one, pad extra space with 0xff (no access). |
| */ |
| if (thread->io_bitmap_max < tss->io_bitmap_max) { |
| memset((char *) tss->io_bitmap + |
| thread->io_bitmap_max, 0xff, |
| tss->io_bitmap_max - thread->io_bitmap_max); |
| } |
| tss->io_bitmap_max = thread->io_bitmap_max; |
| tss->x86_tss.io_bitmap_base = IO_BITMAP_OFFSET; |
| tss->io_bitmap_owner = thread; |
| put_cpu(); |
| |
| return; |
| } |
| put_cpu(); |
| |
| if (regs->flags & X86_VM_MASK) |
| goto gp_in_vm86; |
| |
| tsk = current; |
| if (!user_mode(regs)) |
| goto gp_in_kernel; |
| |
| tsk->thread.error_code = error_code; |
| tsk->thread.trap_no = 13; |
| |
| if (show_unhandled_signals && unhandled_signal(tsk, SIGSEGV) && |
| printk_ratelimit()) { |
| printk(KERN_INFO |
| "%s[%d] general protection ip:%lx sp:%lx error:%lx", |
| tsk->comm, task_pid_nr(tsk), |
| regs->ip, regs->sp, error_code); |
| print_vma_addr(" in ", regs->ip); |
| printk("\n"); |
| } |
| |
| force_sig(SIGSEGV, tsk); |
| return; |
| |
| gp_in_vm86: |
| local_irq_enable(); |
| handle_vm86_fault((struct kernel_vm86_regs *) regs, error_code); |
| return; |
| |
| gp_in_kernel: |
| if (fixup_exception(regs)) |
| return; |
| |
| tsk->thread.error_code = error_code; |
| tsk->thread.trap_no = 13; |
| if (notify_die(DIE_GPF, "general protection fault", regs, |
| error_code, 13, SIGSEGV) == NOTIFY_STOP) |
| return; |
| die("general protection fault", regs, error_code); |
| } |
| |
| static notrace __kprobes void |
| mem_parity_error(unsigned char reason, struct pt_regs *regs) |
| { |
| printk(KERN_EMERG |
| "Uhhuh. NMI received for unknown reason %02x on CPU %d.\n", |
| reason, smp_processor_id()); |
| |
| printk(KERN_EMERG |
| "You have some hardware problem, likely on the PCI bus.\n"); |
| |
| #if defined(CONFIG_EDAC) |
| if (edac_handler_set()) { |
| edac_atomic_assert_error(); |
| return; |
| } |
| #endif |
| |
| if (panic_on_unrecovered_nmi) |
| panic("NMI: Not continuing"); |
| |
| printk(KERN_EMERG "Dazed and confused, but trying to continue\n"); |
| |
| /* Clear and disable the memory parity error line. */ |
| clear_mem_error(reason); |
| } |
| |
| static notrace __kprobes void |
| io_check_error(unsigned char reason, struct pt_regs *regs) |
| { |
| unsigned long i; |
| |
| printk(KERN_EMERG "NMI: IOCK error (debug interrupt?)\n"); |
| show_registers(regs); |
| |
| /* Re-enable the IOCK line, wait for a few seconds */ |
| reason = (reason & 0xf) | 8; |
| outb(reason, 0x61); |
| |
| i = 2000; |
| while (--i) |
| udelay(1000); |
| |
| reason &= ~8; |
| outb(reason, 0x61); |
| } |
| |
| static notrace __kprobes void |
| unknown_nmi_error(unsigned char reason, struct pt_regs *regs) |
| { |
| if (notify_die(DIE_NMIUNKNOWN, "nmi", regs, reason, 2, SIGINT) == NOTIFY_STOP) |
| return; |
| #ifdef CONFIG_MCA |
| /* |
| * Might actually be able to figure out what the guilty party |
| * is: |
| */ |
| if (MCA_bus) { |
| mca_handle_nmi(); |
| return; |
| } |
| #endif |
| printk(KERN_EMERG |
| "Uhhuh. NMI received for unknown reason %02x on CPU %d.\n", |
| reason, smp_processor_id()); |
| |
| printk(KERN_EMERG "Do you have a strange power saving mode enabled?\n"); |
| if (panic_on_unrecovered_nmi) |
| panic("NMI: Not continuing"); |
| |
| printk(KERN_EMERG "Dazed and confused, but trying to continue\n"); |
| } |
| |
| static DEFINE_SPINLOCK(nmi_print_lock); |
| |
| void notrace __kprobes die_nmi(char *str, struct pt_regs *regs, int do_panic) |
| { |
| if (notify_die(DIE_NMIWATCHDOG, str, regs, 0, 2, SIGINT) == NOTIFY_STOP) |
| return; |
| |
| spin_lock(&nmi_print_lock); |
| /* |
| * We are in trouble anyway, lets at least try |
| * to get a message out: |
| */ |
| bust_spinlocks(1); |
| printk(KERN_EMERG "%s", str); |
| printk(" on CPU%d, ip %08lx, registers:\n", |
| smp_processor_id(), regs->ip); |
| show_registers(regs); |
| if (do_panic) |
| panic("Non maskable interrupt"); |
| console_silent(); |
| spin_unlock(&nmi_print_lock); |
| bust_spinlocks(0); |
| |
| /* |
| * If we are in kernel we are probably nested up pretty bad |
| * and might aswell get out now while we still can: |
| */ |
| if (!user_mode_vm(regs)) { |
| current->thread.trap_no = 2; |
| crash_kexec(regs); |
| } |
| |
| do_exit(SIGSEGV); |
| } |
| |
| static notrace __kprobes void default_do_nmi(struct pt_regs *regs) |
| { |
| unsigned char reason = 0; |
| int cpu; |
| |
| cpu = smp_processor_id(); |
| |
| /* Only the BSP gets external NMIs from the system. */ |
| if (!cpu) |
| reason = get_nmi_reason(); |
| |
| if (!(reason & 0xc0)) { |
| if (notify_die(DIE_NMI_IPI, "nmi_ipi", regs, reason, 2, SIGINT) |
| == NOTIFY_STOP) |
| return; |
| #ifdef CONFIG_X86_LOCAL_APIC |
| /* |
| * Ok, so this is none of the documented NMI sources, |
| * so it must be the NMI watchdog. |
| */ |
| if (nmi_watchdog_tick(regs, reason)) |
| return; |
| if (!do_nmi_callback(regs, cpu)) |
| unknown_nmi_error(reason, regs); |
| #else |
| unknown_nmi_error(reason, regs); |
| #endif |
| |
| return; |
| } |
| if (notify_die(DIE_NMI, "nmi", regs, reason, 2, SIGINT) == NOTIFY_STOP) |
| return; |
| |
| /* AK: following checks seem to be broken on modern chipsets. FIXME */ |
| if (reason & 0x80) |
| mem_parity_error(reason, regs); |
| if (reason & 0x40) |
| io_check_error(reason, regs); |
| /* |
| * Reassert NMI in case it became active meanwhile |
| * as it's edge-triggered: |
| */ |
| reassert_nmi(); |
| } |
| |
| notrace __kprobes void do_nmi(struct pt_regs *regs, long error_code) |
| { |
| int cpu; |
| |
| nmi_enter(); |
| |
| cpu = smp_processor_id(); |
| |
| ++nmi_count(cpu); |
| |
| if (!ignore_nmis) |
| default_do_nmi(regs); |
| |
| nmi_exit(); |
| } |
| |
| void stop_nmi(void) |
| { |
| acpi_nmi_disable(); |
| ignore_nmis++; |
| } |
| |
| void restart_nmi(void) |
| { |
| ignore_nmis--; |
| acpi_nmi_enable(); |
| } |
| |
| void __kprobes do_int3(struct pt_regs *regs, long error_code) |
| { |
| #ifdef CONFIG_KPROBES |
| if (notify_die(DIE_INT3, "int3", regs, error_code, 3, SIGTRAP) |
| == NOTIFY_STOP) |
| return; |
| conditional_sti(regs); |
| #else |
| if (notify_die(DIE_TRAP, "int3", regs, error_code, 3, SIGTRAP) |
| == NOTIFY_STOP) |
| return; |
| #endif |
| |
| do_trap(3, SIGTRAP, "int3", 1, regs, error_code, NULL); |
| } |
| |
| /* |
| * Our handling of the processor debug registers is non-trivial. |
| * We do not clear them on entry and exit from the kernel. Therefore |
| * it is possible to get a watchpoint trap here from inside the kernel. |
| * However, the code in ./ptrace.c has ensured that the user can |
| * only set watchpoints on userspace addresses. Therefore the in-kernel |
| * watchpoint trap can only occur in code which is reading/writing |
| * from user space. Such code must not hold kernel locks (since it |
| * can equally take a page fault), therefore it is safe to call |
| * force_sig_info even though that claims and releases locks. |
| * |
| * Code in ./signal.c ensures that the debug control register |
| * is restored before we deliver any signal, and therefore that |
| * user code runs with the correct debug control register even though |
| * we clear it here. |
| * |
| * Being careful here means that we don't have to be as careful in a |
| * lot of more complicated places (task switching can be a bit lazy |
| * about restoring all the debug state, and ptrace doesn't have to |
| * find every occurrence of the TF bit that could be saved away even |
| * by user code) |
| */ |
| void __kprobes do_debug(struct pt_regs *regs, long error_code) |
| { |
| struct task_struct *tsk = current; |
| unsigned int condition; |
| int si_code; |
| |
| get_debugreg(condition, 6); |
| |
| /* |
| * The processor cleared BTF, so don't mark that we need it set. |
| */ |
| clear_tsk_thread_flag(tsk, TIF_DEBUGCTLMSR); |
| tsk->thread.debugctlmsr = 0; |
| |
| if (notify_die(DIE_DEBUG, "debug", regs, condition, error_code, |
| SIGTRAP) == NOTIFY_STOP) |
| return; |
| /* It's safe to allow irq's after DR6 has been saved */ |
| if (regs->flags & X86_EFLAGS_IF) |
| local_irq_enable(); |
| |
| /* Mask out spurious debug traps due to lazy DR7 setting */ |
| if (condition & (DR_TRAP0|DR_TRAP1|DR_TRAP2|DR_TRAP3)) { |
| if (!tsk->thread.debugreg7) |
| goto clear_dr7; |
| } |
| |
| if (regs->flags & X86_VM_MASK) |
| goto debug_vm86; |
| |
| /* Save debug status register where ptrace can see it */ |
| tsk->thread.debugreg6 = condition; |
| |
| /* |
| * Single-stepping through TF: make sure we ignore any events in |
| * kernel space (but re-enable TF when returning to user mode). |
| */ |
| if (condition & DR_STEP) { |
| /* |
| * We already checked v86 mode above, so we can |
| * check for kernel mode by just checking the CPL |
| * of CS. |
| */ |
| if (!user_mode(regs)) |
| goto clear_TF_reenable; |
| } |
| |
| si_code = get_si_code((unsigned long)condition); |
| /* Ok, finally something we can handle */ |
| send_sigtrap(tsk, regs, error_code, si_code); |
| |
| /* |
| * Disable additional traps. They'll be re-enabled when |
| * the signal is delivered. |
| */ |
| clear_dr7: |
| set_debugreg(0, 7); |
| return; |
| |
| debug_vm86: |
| handle_vm86_trap((struct kernel_vm86_regs *) regs, error_code, 1); |
| return; |
| |
| clear_TF_reenable: |
| set_tsk_thread_flag(tsk, TIF_SINGLESTEP); |
| regs->flags &= ~X86_EFLAGS_TF; |
| return; |
| } |
| |
| /* |
| * Note that we play around with the 'TS' bit in an attempt to get |
| * the correct behaviour even in the presence of the asynchronous |
| * IRQ13 behaviour |
| */ |
| void math_error(void __user *ip) |
| { |
| struct task_struct *task; |
| siginfo_t info; |
| unsigned short cwd, swd; |
| |
| /* |
| * Save the info for the exception handler and clear the error. |
| */ |
| task = current; |
| save_init_fpu(task); |
| task->thread.trap_no = 16; |
| task->thread.error_code = 0; |
| info.si_signo = SIGFPE; |
| info.si_errno = 0; |
| info.si_code = __SI_FAULT; |
| info.si_addr = ip; |
| /* |
| * (~cwd & swd) will mask out exceptions that are not set to unmasked |
| * status. 0x3f is the exception bits in these regs, 0x200 is the |
| * C1 reg you need in case of a stack fault, 0x040 is the stack |
| * fault bit. We should only be taking one exception at a time, |
| * so if this combination doesn't produce any single exception, |
| * then we have a bad program that isn't synchronizing its FPU usage |
| * and it will suffer the consequences since we won't be able to |
| * fully reproduce the context of the exception |
| */ |
| cwd = get_fpu_cwd(task); |
| swd = get_fpu_swd(task); |
| switch (swd & ~cwd & 0x3f) { |
| case 0x000: /* No unmasked exception */ |
| return; |
| default: /* Multiple exceptions */ |
| break; |
| case 0x001: /* Invalid Op */ |
| /* |
| * swd & 0x240 == 0x040: Stack Underflow |
| * swd & 0x240 == 0x240: Stack Overflow |
| * User must clear the SF bit (0x40) if set |
| */ |
| info.si_code = FPE_FLTINV; |
| break; |
| case 0x002: /* Denormalize */ |
| case 0x010: /* Underflow */ |
| info.si_code = FPE_FLTUND; |
| break; |
| case 0x004: /* Zero Divide */ |
| info.si_code = FPE_FLTDIV; |
| break; |
| case 0x008: /* Overflow */ |
| info.si_code = FPE_FLTOVF; |
| break; |
| case 0x020: /* Precision */ |
| info.si_code = FPE_FLTRES; |
| break; |
| } |
| force_sig_info(SIGFPE, &info, task); |
| } |
| |
| void do_coprocessor_error(struct pt_regs *regs, long error_code) |
| { |
| conditional_sti(regs); |
| ignore_fpu_irq = 1; |
| math_error((void __user *)regs->ip); |
| } |
| |
| static void simd_math_error(void __user *ip) |
| { |
| struct task_struct *task; |
| siginfo_t info; |
| unsigned short mxcsr; |
| |
| /* |
| * Save the info for the exception handler and clear the error. |
| */ |
| task = current; |
| save_init_fpu(task); |
| task->thread.trap_no = 19; |
| task->thread.error_code = 0; |
| info.si_signo = SIGFPE; |
| info.si_errno = 0; |
| info.si_code = __SI_FAULT; |
| info.si_addr = ip; |
| /* |
| * The SIMD FPU exceptions are handled a little differently, as there |
| * is only a single status/control register. Thus, to determine which |
| * unmasked exception was caught we must mask the exception mask bits |
| * at 0x1f80, and then use these to mask the exception bits at 0x3f. |
| */ |
| mxcsr = get_fpu_mxcsr(task); |
| switch (~((mxcsr & 0x1f80) >> 7) & (mxcsr & 0x3f)) { |
| case 0x000: |
| default: |
| break; |
| case 0x001: /* Invalid Op */ |
| info.si_code = FPE_FLTINV; |
| break; |
| case 0x002: /* Denormalize */ |
| case 0x010: /* Underflow */ |
| info.si_code = FPE_FLTUND; |
| break; |
| case 0x004: /* Zero Divide */ |
| info.si_code = FPE_FLTDIV; |
| break; |
| case 0x008: /* Overflow */ |
| info.si_code = FPE_FLTOVF; |
| break; |
| case 0x020: /* Precision */ |
| info.si_code = FPE_FLTRES; |
| break; |
| } |
| force_sig_info(SIGFPE, &info, task); |
| } |
| |
| void do_simd_coprocessor_error(struct pt_regs *regs, long error_code) |
| { |
| conditional_sti(regs); |
| |
| if (cpu_has_xmm) { |
| /* Handle SIMD FPU exceptions on PIII+ processors. */ |
| ignore_fpu_irq = 1; |
| simd_math_error((void __user *)regs->ip); |
| return; |
| } |
| /* |
| * Handle strange cache flush from user space exception |
| * in all other cases. This is undocumented behaviour. |
| */ |
| if (regs->flags & X86_VM_MASK) { |
| handle_vm86_fault((struct kernel_vm86_regs *)regs, error_code); |
| return; |
| } |
| current->thread.trap_no = 19; |
| current->thread.error_code = error_code; |
| die_if_kernel("cache flush denied", regs, error_code); |
| force_sig(SIGSEGV, current); |
| } |
| |
| void do_spurious_interrupt_bug(struct pt_regs *regs, long error_code) |
| { |
| conditional_sti(regs); |
| #if 0 |
| /* No need to warn about this any longer. */ |
| printk(KERN_INFO "Ignoring P6 Local APIC Spurious Interrupt Bug...\n"); |
| #endif |
| } |
| |
| unsigned long patch_espfix_desc(unsigned long uesp, unsigned long kesp) |
| { |
| struct desc_struct *gdt = get_cpu_gdt_table(smp_processor_id()); |
| unsigned long base = (kesp - uesp) & -THREAD_SIZE; |
| unsigned long new_kesp = kesp - base; |
| unsigned long lim_pages = (new_kesp | (THREAD_SIZE - 1)) >> PAGE_SHIFT; |
| __u64 desc = *(__u64 *)&gdt[GDT_ENTRY_ESPFIX_SS]; |
| |
| /* Set up base for espfix segment */ |
| desc &= 0x00f0ff0000000000ULL; |
| desc |= ((((__u64)base) << 16) & 0x000000ffffff0000ULL) | |
| ((((__u64)base) << 32) & 0xff00000000000000ULL) | |
| ((((__u64)lim_pages) << 32) & 0x000f000000000000ULL) | |
| (lim_pages & 0xffff); |
| *(__u64 *)&gdt[GDT_ENTRY_ESPFIX_SS] = desc; |
| |
| return new_kesp; |
| } |
| |
| /* |
| * 'math_state_restore()' saves the current math information in the |
| * old math state array, and gets the new ones from the current task |
| * |
| * Careful.. There are problems with IBM-designed IRQ13 behaviour. |
| * Don't touch unless you *really* know how it works. |
| * |
| * Must be called with kernel preemption disabled (in this case, |
| * local interrupts are disabled at the call-site in entry.S). |
| */ |
| asmlinkage void math_state_restore(void) |
| { |
| struct thread_info *thread = current_thread_info(); |
| struct task_struct *tsk = thread->task; |
| |
| if (!tsk_used_math(tsk)) { |
| local_irq_enable(); |
| /* |
| * does a slab alloc which can sleep |
| */ |
| if (init_fpu(tsk)) { |
| /* |
| * ran out of memory! |
| */ |
| do_group_exit(SIGKILL); |
| return; |
| } |
| local_irq_disable(); |
| } |
| |
| clts(); /* Allow maths ops (or we recurse) */ |
| restore_fpu(tsk); |
| thread->status |= TS_USEDFPU; /* So we fnsave on switch_to() */ |
| tsk->fpu_counter++; |
| } |
| EXPORT_SYMBOL_GPL(math_state_restore); |
| |
| #ifndef CONFIG_MATH_EMULATION |
| |
| asmlinkage void math_emulate(long arg) |
| { |
| printk(KERN_EMERG |
| "math-emulation not enabled and no coprocessor found.\n"); |
| printk(KERN_EMERG "killing %s.\n", current->comm); |
| force_sig(SIGFPE, current); |
| schedule(); |
| } |
| |
| #endif /* CONFIG_MATH_EMULATION */ |
| |
| void __kprobes do_device_not_available(struct pt_regs *regs, long error) |
| { |
| if (read_cr0() & X86_CR0_EM) { |
| conditional_sti(regs); |
| math_emulate(0); |
| } else { |
| math_state_restore(); /* interrupts still off */ |
| conditional_sti(regs); |
| } |
| } |
| |
| #ifdef CONFIG_X86_MCE |
| void __kprobes do_machine_check(struct pt_regs *regs, long error) |
| { |
| conditional_sti(regs); |
| machine_check_vector(regs, error); |
| } |
| #endif |
| |
| void do_iret_error(struct pt_regs *regs, long error_code) |
| { |
| siginfo_t info; |
| local_irq_enable(); |
| |
| info.si_signo = SIGILL; |
| info.si_errno = 0; |
| info.si_code = ILL_BADSTK; |
| info.si_addr = 0; |
| if (notify_die(DIE_TRAP, "iret exception", |
| regs, error_code, 32, SIGILL) == NOTIFY_STOP) |
| return; |
| do_trap(32, SIGILL, "iret exception", 0, regs, error_code, &info); |
| } |
| |
| void __init trap_init(void) |
| { |
| int i; |
| |
| #ifdef CONFIG_EISA |
| void __iomem *p = early_ioremap(0x0FFFD9, 4); |
| |
| if (readl(p) == 'E' + ('I'<<8) + ('S'<<16) + ('A'<<24)) |
| EISA_bus = 1; |
| early_iounmap(p, 4); |
| #endif |
| |
| set_intr_gate(0, ÷_error); |
| set_intr_gate(1, &debug); |
| set_intr_gate(2, &nmi); |
| set_system_intr_gate(3, &int3); /* int3 can be called from all */ |
| set_system_intr_gate(4, &overflow); /* int4 can be called from all */ |
| set_intr_gate(5, &bounds); |
| set_intr_gate(6, &invalid_op); |
| set_intr_gate(7, &device_not_available); |
| set_task_gate(8, GDT_ENTRY_DOUBLEFAULT_TSS); |
| set_intr_gate(9, &coprocessor_segment_overrun); |
| set_intr_gate(10, &invalid_TSS); |
| set_intr_gate(11, &segment_not_present); |
| set_intr_gate(12, &stack_segment); |
| set_intr_gate(13, &general_protection); |
| set_intr_gate(14, &page_fault); |
| set_intr_gate(15, &spurious_interrupt_bug); |
| set_intr_gate(16, &coprocessor_error); |
| set_intr_gate(17, &alignment_check); |
| #ifdef CONFIG_X86_MCE |
| set_intr_gate(18, &machine_check); |
| #endif |
| set_intr_gate(19, &simd_coprocessor_error); |
| |
| if (cpu_has_fxsr) { |
| printk(KERN_INFO "Enabling fast FPU save and restore... "); |
| set_in_cr4(X86_CR4_OSFXSR); |
| printk("done.\n"); |
| } |
| if (cpu_has_xmm) { |
| printk(KERN_INFO |
| "Enabling unmasked SIMD FPU exception support... "); |
| set_in_cr4(X86_CR4_OSXMMEXCPT); |
| printk("done.\n"); |
| } |
| |
| set_system_gate(SYSCALL_VECTOR, &system_call); |
| |
| /* Reserve all the builtin and the syscall vector: */ |
| for (i = 0; i < FIRST_EXTERNAL_VECTOR; i++) |
| set_bit(i, used_vectors); |
| |
| set_bit(SYSCALL_VECTOR, used_vectors); |
| |
| /* |
| * Should be a barrier for any external CPU state: |
| */ |
| cpu_init(); |
| |
| trap_init_hook(); |
| } |
| |
| static int __init kstack_setup(char *s) |
| { |
| kstack_depth_to_print = simple_strtoul(s, NULL, 0); |
| |
| return 1; |
| } |
| __setup("kstack=", kstack_setup); |
| |
| static int __init code_bytes_setup(char *s) |
| { |
| code_bytes = simple_strtoul(s, NULL, 0); |
| if (code_bytes > 8192) |
| code_bytes = 8192; |
| |
| return 1; |
| } |
| __setup("code_bytes=", code_bytes_setup); |