| // SPDX-License-Identifier: GPL-2.0 | |
| /* | |
| * arch/alpha/boot/main.c | |
| * | |
| * Copyright (C) 1994, 1995 Linus Torvalds | |
| * | |
| * This file is the bootloader for the Linux/AXP kernel | |
| */ | |
| #include <linux/kernel.h> | |
| #include <linux/slab.h> | |
| #include <linux/string.h> | |
| #include <generated/utsrelease.h> | |
| #include <linux/mm.h> | |
| #include <asm/console.h> | |
| #include <asm/hwrpb.h> | |
| #include <stdarg.h> | |
| #include "ksize.h" | |
| extern unsigned long switch_to_osf_pal(unsigned long nr, | |
| struct pcb_struct * pcb_va, struct pcb_struct * pcb_pa, | |
| unsigned long *vptb); | |
| struct hwrpb_struct *hwrpb = INIT_HWRPB; | |
| static struct pcb_struct pcb_va[1]; | |
| /* | |
| * Find a physical address of a virtual object.. | |
| * | |
| * This is easy using the virtual page table address. | |
| */ | |
| static inline void * | |
| find_pa(unsigned long *vptb, void *ptr) | |
| { | |
| unsigned long address = (unsigned long) ptr; | |
| unsigned long result; | |
| result = vptb[address >> 13]; | |
| result >>= 32; | |
| result <<= 13; | |
| result |= address & 0x1fff; | |
| return (void *) result; | |
| } | |
| /* | |
| * This function moves into OSF/1 pal-code, and has a temporary | |
| * PCB for that. The kernel proper should replace this PCB with | |
| * the real one as soon as possible. | |
| * | |
| * The page table muckery in here depends on the fact that the boot | |
| * code has the L1 page table identity-map itself in the second PTE | |
| * in the L1 page table. Thus the L1-page is virtually addressable | |
| * itself (through three levels) at virtual address 0x200802000. | |
| */ | |
| #define VPTB ((unsigned long *) 0x200000000) | |
| #define L1 ((unsigned long *) 0x200802000) | |
| void | |
| pal_init(void) | |
| { | |
| unsigned long i, rev; | |
| struct percpu_struct * percpu; | |
| struct pcb_struct * pcb_pa; | |
| /* Create the dummy PCB. */ | |
| pcb_va->ksp = 0; | |
| pcb_va->usp = 0; | |
| pcb_va->ptbr = L1[1] >> 32; | |
| pcb_va->asn = 0; | |
| pcb_va->pcc = 0; | |
| pcb_va->unique = 0; | |
| pcb_va->flags = 1; | |
| pcb_va->res1 = 0; | |
| pcb_va->res2 = 0; | |
| pcb_pa = find_pa(VPTB, pcb_va); | |
| /* | |
| * a0 = 2 (OSF) | |
| * a1 = return address, but we give the asm the vaddr of the PCB | |
| * a2 = physical addr of PCB | |
| * a3 = new virtual page table pointer | |
| * a4 = KSP (but the asm sets it) | |
| */ | |
| srm_printk("Switching to OSF PAL-code .. "); | |
| i = switch_to_osf_pal(2, pcb_va, pcb_pa, VPTB); | |
| if (i) { | |
| srm_printk("failed, code %ld\n", i); | |
| __halt(); | |
| } | |
| percpu = (struct percpu_struct *) | |
| (INIT_HWRPB->processor_offset + (unsigned long) INIT_HWRPB); | |
| rev = percpu->pal_revision = percpu->palcode_avail[2]; | |
| srm_printk("Ok (rev %lx)\n", rev); | |
| tbia(); /* do it directly in case we are SMP */ | |
| } | |
| static inline long openboot(void) | |
| { | |
| char bootdev[256]; | |
| long result; | |
| result = callback_getenv(ENV_BOOTED_DEV, bootdev, 255); | |
| if (result < 0) | |
| return result; | |
| return callback_open(bootdev, result & 255); | |
| } | |
| static inline long close(long dev) | |
| { | |
| return callback_close(dev); | |
| } | |
| static inline long load(long dev, unsigned long addr, unsigned long count) | |
| { | |
| char bootfile[256]; | |
| extern char _end; | |
| long result, boot_size = &_end - (char *) BOOT_ADDR; | |
| result = callback_getenv(ENV_BOOTED_FILE, bootfile, 255); | |
| if (result < 0) | |
| return result; | |
| result &= 255; | |
| bootfile[result] = '\0'; | |
| if (result) | |
| srm_printk("Boot file specification (%s) not implemented\n", | |
| bootfile); | |
| return callback_read(dev, count, (void *)addr, boot_size/512 + 1); | |
| } | |
| /* | |
| * Start the kernel. | |
| */ | |
| static void runkernel(void) | |
| { | |
| __asm__ __volatile__( | |
| "bis %1,%1,$30\n\t" | |
| "bis %0,%0,$26\n\t" | |
| "ret ($26)" | |
| : /* no outputs: it doesn't even return */ | |
| : "r" (START_ADDR), | |
| "r" (PAGE_SIZE + INIT_STACK)); | |
| } | |
| void start_kernel(void) | |
| { | |
| long i; | |
| long dev; | |
| int nbytes; | |
| char envval[256]; | |
| srm_printk("Linux/AXP bootloader for Linux " UTS_RELEASE "\n"); | |
| if (INIT_HWRPB->pagesize != 8192) { | |
| srm_printk("Expected 8kB pages, got %ldkB\n", INIT_HWRPB->pagesize >> 10); | |
| return; | |
| } | |
| pal_init(); | |
| dev = openboot(); | |
| if (dev < 0) { | |
| srm_printk("Unable to open boot device: %016lx\n", dev); | |
| return; | |
| } | |
| dev &= 0xffffffff; | |
| srm_printk("Loading vmlinux ..."); | |
| i = load(dev, START_ADDR, KERNEL_SIZE); | |
| close(dev); | |
| if (i != KERNEL_SIZE) { | |
| srm_printk("Failed (%lx)\n", i); | |
| return; | |
| } | |
| nbytes = callback_getenv(ENV_BOOTED_OSFLAGS, envval, sizeof(envval)); | |
| if (nbytes < 0) { | |
| nbytes = 0; | |
| } | |
| envval[nbytes] = '\0'; | |
| strcpy((char*)ZERO_PGE, envval); | |
| srm_printk(" Ok\nNow booting the kernel\n"); | |
| runkernel(); | |
| for (i = 0 ; i < 0x100000000 ; i++) | |
| /* nothing */; | |
| __halt(); | |
| } |