| // SPDX-License-Identifier: GPL-2.0 | |
| #include <linux/kernel.h> | |
| #include <linux/jump_label.h> | |
| #include "asm/cacheflush.h" | |
| #define JUMPLABEL_ERR "ARC: jump_label: ERROR: " | |
| /* Halt system on fatal error to make debug easier */ | |
| #define arc_jl_fatal(format...) \ | |
| ({ \ | |
| pr_err(JUMPLABEL_ERR format); \ | |
| BUG(); \ | |
| }) | |
| static inline u32 arc_gen_nop(void) | |
| { | |
| /* 1x 32bit NOP in middle endian */ | |
| return 0x7000264a; | |
| } | |
| /* | |
| * Atomic update of patched instruction is only available if this | |
| * instruction doesn't cross L1 cache line boundary. You can read about | |
| * the way we achieve this in arc/include/asm/jump_label.h | |
| */ | |
| static inline void instruction_align_assert(void *addr, int len) | |
| { | |
| unsigned long a = (unsigned long)addr; | |
| if ((a >> L1_CACHE_SHIFT) != ((a + len - 1) >> L1_CACHE_SHIFT)) | |
| arc_jl_fatal("instruction (addr %px) cross L1 cache line border", | |
| addr); | |
| } | |
| /* | |
| * ARCv2 'Branch unconditionally' instruction: | |
| * 00000ssssssssss1SSSSSSSSSSNRtttt | |
| * s S[n:0] lower bits signed immediate (number is bitfield size) | |
| * S S[m:n+1] upper bits signed immediate (number is bitfield size) | |
| * t S[24:21] upper bits signed immediate (branch unconditionally far) | |
| * N N <.d> delay slot mode | |
| * R R Reserved | |
| */ | |
| static inline u32 arc_gen_branch(jump_label_t pc, jump_label_t target) | |
| { | |
| u32 instruction_l, instruction_r; | |
| u32 pcl = pc & GENMASK(31, 2); | |
| u32 u_offset = target - pcl; | |
| u32 s, S, t; | |
| /* | |
| * Offset in 32-bit branch instruction must to fit into s25. | |
| * Something is terribly broken if we get such huge offset within one | |
| * function. | |
| */ | |
| if ((s32)u_offset < -16777216 || (s32)u_offset > 16777214) | |
| arc_jl_fatal("gen branch with offset (%d) not fit in s25", | |
| (s32)u_offset); | |
| /* | |
| * All instructions are aligned by 2 bytes so we should never get offset | |
| * here which is not 2 bytes aligned. | |
| */ | |
| if (u_offset & 0x1) | |
| arc_jl_fatal("gen branch with offset (%d) unaligned to 2 bytes", | |
| (s32)u_offset); | |
| s = (u_offset >> 1) & GENMASK(9, 0); | |
| S = (u_offset >> 11) & GENMASK(9, 0); | |
| t = (u_offset >> 21) & GENMASK(3, 0); | |
| /* 00000ssssssssss1 */ | |
| instruction_l = (s << 1) | 0x1; | |
| /* SSSSSSSSSSNRtttt */ | |
| instruction_r = (S << 6) | t; | |
| return (instruction_r << 16) | (instruction_l & GENMASK(15, 0)); | |
| } | |
| void arch_jump_label_transform(struct jump_entry *entry, | |
| enum jump_label_type type) | |
| { | |
| jump_label_t *instr_addr = (jump_label_t *)entry->code; | |
| u32 instr; | |
| instruction_align_assert(instr_addr, JUMP_LABEL_NOP_SIZE); | |
| if (type == JUMP_LABEL_JMP) | |
| instr = arc_gen_branch(entry->code, entry->target); | |
| else | |
| instr = arc_gen_nop(); | |
| WRITE_ONCE(*instr_addr, instr); | |
| flush_icache_range(entry->code, entry->code + JUMP_LABEL_NOP_SIZE); | |
| } | |
| void arch_jump_label_transform_static(struct jump_entry *entry, | |
| enum jump_label_type type) | |
| { | |
| /* | |
| * We use only one NOP type (1x, 4 byte) in arch_static_branch, so | |
| * there's no need to patch an identical NOP over the top of it here. | |
| * The generic code calls 'arch_jump_label_transform' if the NOP needs | |
| * to be replaced by a branch, so 'arch_jump_label_transform_static' is | |
| * never called with type other than JUMP_LABEL_NOP. | |
| */ | |
| BUG_ON(type != JUMP_LABEL_NOP); | |
| } | |
| #ifdef CONFIG_ARC_DBG_JUMP_LABEL | |
| #define SELFTEST_MSG "ARC: instruction generation self-test: " | |
| struct arc_gen_branch_testdata { | |
| jump_label_t pc; | |
| jump_label_t target_address; | |
| u32 expected_instr; | |
| }; | |
| static __init int branch_gen_test(const struct arc_gen_branch_testdata *test) | |
| { | |
| u32 instr_got; | |
| instr_got = arc_gen_branch(test->pc, test->target_address); | |
| if (instr_got == test->expected_instr) | |
| return 0; | |
| pr_err(SELFTEST_MSG "FAIL:\n arc_gen_branch(0x%08x, 0x%08x) != 0x%08x, got 0x%08x\n", | |
| test->pc, test->target_address, | |
| test->expected_instr, instr_got); | |
| return -EFAULT; | |
| } | |
| /* | |
| * Offset field in branch instruction is not continuous. Test all | |
| * available offset field and sign combinations. Test data is generated | |
| * from real working code. | |
| */ | |
| static const struct arc_gen_branch_testdata arcgenbr_test_data[] __initconst = { | |
| {0x90007548, 0x90007514, 0xffcf07cd}, /* tiny (-52) offs */ | |
| {0x9000c9c0, 0x9000c782, 0xffcf05c3}, /* tiny (-574) offs */ | |
| {0x9000cc1c, 0x9000c782, 0xffcf0367}, /* tiny (-1178) offs */ | |
| {0x9009dce0, 0x9009d106, 0xff8f0427}, /* small (-3034) offs */ | |
| {0x9000f5de, 0x90007d30, 0xfc0f0755}, /* big (-30892) offs */ | |
| {0x900a2444, 0x90035f64, 0xc9cf0321}, /* huge (-443616) offs */ | |
| {0x90007514, 0x9000752c, 0x00000019}, /* tiny (+24) offs */ | |
| {0x9001a578, 0x9001a77a, 0x00000203}, /* tiny (+514) offs */ | |
| {0x90031ed8, 0x90032634, 0x0000075d}, /* tiny (+1884) offs */ | |
| {0x9008c7f2, 0x9008d3f0, 0x00400401}, /* small (+3072) offs */ | |
| {0x9000bb38, 0x9003b340, 0x17c00009}, /* big (+194568) offs */ | |
| {0x90008f44, 0x90578d80, 0xb7c2063d} /* huge (+5701180) offs */ | |
| }; | |
| static __init int instr_gen_test(void) | |
| { | |
| int i; | |
| for (i = 0; i < ARRAY_SIZE(arcgenbr_test_data); i++) | |
| if (branch_gen_test(&arcgenbr_test_data[i])) | |
| return -EFAULT; | |
| pr_info(SELFTEST_MSG "OK\n"); | |
| return 0; | |
| } | |
| early_initcall(instr_gen_test); | |
| #endif /* CONFIG_ARC_DBG_JUMP_LABEL */ |