| // SPDX-License-Identifier: GPL-2.0-only | |
| /* | |
| * ARM64 Specific Low-Level ACPI Boot Support | |
| * | |
| * Copyright (C) 2013-2014, Linaro Ltd. | |
| * Author: Al Stone <al.stone@linaro.org> | |
| * Author: Graeme Gregory <graeme.gregory@linaro.org> | |
| * Author: Hanjun Guo <hanjun.guo@linaro.org> | |
| * Author: Tomasz Nowicki <tomasz.nowicki@linaro.org> | |
| * Author: Naresh Bhat <naresh.bhat@linaro.org> | |
| */ | |
| #define pr_fmt(fmt) "ACPI: " fmt | |
| #include <linux/acpi.h> | |
| #include <linux/cpumask.h> | |
| #include <linux/efi.h> | |
| #include <linux/efi-bgrt.h> | |
| #include <linux/init.h> | |
| #include <linux/irq.h> | |
| #include <linux/irqdomain.h> | |
| #include <linux/irq_work.h> | |
| #include <linux/memblock.h> | |
| #include <linux/of_fdt.h> | |
| #include <linux/smp.h> | |
| #include <linux/serial_core.h> | |
| #include <linux/pgtable.h> | |
| #include <acpi/ghes.h> | |
| #include <asm/cputype.h> | |
| #include <asm/cpu_ops.h> | |
| #include <asm/daifflags.h> | |
| #include <asm/smp_plat.h> | |
| int acpi_noirq = 1; /* skip ACPI IRQ initialization */ | |
| int acpi_disabled = 1; | |
| EXPORT_SYMBOL(acpi_disabled); | |
| int acpi_pci_disabled = 1; /* skip ACPI PCI scan and IRQ initialization */ | |
| EXPORT_SYMBOL(acpi_pci_disabled); | |
| static bool param_acpi_off __initdata; | |
| static bool param_acpi_on __initdata; | |
| static bool param_acpi_force __initdata; | |
| static int __init parse_acpi(char *arg) | |
| { | |
| if (!arg) | |
| return -EINVAL; | |
| /* "acpi=off" disables both ACPI table parsing and interpreter */ | |
| if (strcmp(arg, "off") == 0) | |
| param_acpi_off = true; | |
| else if (strcmp(arg, "on") == 0) /* prefer ACPI over DT */ | |
| param_acpi_on = true; | |
| else if (strcmp(arg, "force") == 0) /* force ACPI to be enabled */ | |
| param_acpi_force = true; | |
| else | |
| return -EINVAL; /* Core will print when we return error */ | |
| return 0; | |
| } | |
| early_param("acpi", parse_acpi); | |
| static int __init dt_scan_depth1_nodes(unsigned long node, | |
| const char *uname, int depth, | |
| void *data) | |
| { | |
| /* | |
| * Ignore anything not directly under the root node; we'll | |
| * catch its parent instead. | |
| */ | |
| if (depth != 1) | |
| return 0; | |
| if (strcmp(uname, "chosen") == 0) | |
| return 0; | |
| if (strcmp(uname, "hypervisor") == 0 && | |
| of_flat_dt_is_compatible(node, "xen,xen")) | |
| return 0; | |
| /* | |
| * This node at depth 1 is neither a chosen node nor a xen node, | |
| * which we do not expect. | |
| */ | |
| return 1; | |
| } | |
| /* | |
| * __acpi_map_table() will be called before page_init(), so early_ioremap() | |
| * or early_memremap() should be called here to for ACPI table mapping. | |
| */ | |
| void __init __iomem *__acpi_map_table(unsigned long phys, unsigned long size) | |
| { | |
| if (!size) | |
| return NULL; | |
| return early_memremap(phys, size); | |
| } | |
| void __init __acpi_unmap_table(void __iomem *map, unsigned long size) | |
| { | |
| if (!map || !size) | |
| return; | |
| early_memunmap(map, size); | |
| } | |
| bool __init acpi_psci_present(void) | |
| { | |
| return acpi_gbl_FADT.arm_boot_flags & ACPI_FADT_PSCI_COMPLIANT; | |
| } | |
| /* Whether HVC must be used instead of SMC as the PSCI conduit */ | |
| bool acpi_psci_use_hvc(void) | |
| { | |
| return acpi_gbl_FADT.arm_boot_flags & ACPI_FADT_PSCI_USE_HVC; | |
| } | |
| /* | |
| * acpi_fadt_sanity_check() - Check FADT presence and carry out sanity | |
| * checks on it | |
| * | |
| * Return 0 on success, <0 on failure | |
| */ | |
| static int __init acpi_fadt_sanity_check(void) | |
| { | |
| struct acpi_table_header *table; | |
| struct acpi_table_fadt *fadt; | |
| acpi_status status; | |
| int ret = 0; | |
| /* | |
| * FADT is required on arm64; retrieve it to check its presence | |
| * and carry out revision and ACPI HW reduced compliancy tests | |
| */ | |
| status = acpi_get_table(ACPI_SIG_FADT, 0, &table); | |
| if (ACPI_FAILURE(status)) { | |
| const char *msg = acpi_format_exception(status); | |
| pr_err("Failed to get FADT table, %s\n", msg); | |
| return -ENODEV; | |
| } | |
| fadt = (struct acpi_table_fadt *)table; | |
| /* | |
| * Revision in table header is the FADT Major revision, and there | |
| * is a minor revision of FADT which was introduced by ACPI 5.1, | |
| * we only deal with ACPI 5.1 or newer revision to get GIC and SMP | |
| * boot protocol configuration data. | |
| */ | |
| if (table->revision < 5 || | |
| (table->revision == 5 && fadt->minor_revision < 1)) { | |
| pr_err(FW_BUG "Unsupported FADT revision %d.%d, should be 5.1+\n", | |
| table->revision, fadt->minor_revision); | |
| if (!fadt->arm_boot_flags) { | |
| ret = -EINVAL; | |
| goto out; | |
| } | |
| pr_err("FADT has ARM boot flags set, assuming 5.1\n"); | |
| } | |
| if (!(fadt->flags & ACPI_FADT_HW_REDUCED)) { | |
| pr_err("FADT not ACPI hardware reduced compliant\n"); | |
| ret = -EINVAL; | |
| } | |
| out: | |
| /* | |
| * acpi_get_table() creates FADT table mapping that | |
| * should be released after parsing and before resuming boot | |
| */ | |
| acpi_put_table(table); | |
| return ret; | |
| } | |
| /* | |
| * acpi_boot_table_init() called from setup_arch(), always. | |
| * 1. find RSDP and get its address, and then find XSDT | |
| * 2. extract all tables and checksums them all | |
| * 3. check ACPI FADT revision | |
| * 4. check ACPI FADT HW reduced flag | |
| * | |
| * We can parse ACPI boot-time tables such as MADT after | |
| * this function is called. | |
| * | |
| * On return ACPI is enabled if either: | |
| * | |
| * - ACPI tables are initialized and sanity checks passed | |
| * - acpi=force was passed in the command line and ACPI was not disabled | |
| * explicitly through acpi=off command line parameter | |
| * | |
| * ACPI is disabled on function return otherwise | |
| */ | |
| void __init acpi_boot_table_init(void) | |
| { | |
| /* | |
| * Enable ACPI instead of device tree unless | |
| * - ACPI has been disabled explicitly (acpi=off), or | |
| * - the device tree is not empty (it has more than just a /chosen node, | |
| * and a /hypervisor node when running on Xen) | |
| * and ACPI has not been [force] enabled (acpi=on|force) | |
| */ | |
| if (param_acpi_off || | |
| (!param_acpi_on && !param_acpi_force && | |
| of_scan_flat_dt(dt_scan_depth1_nodes, NULL))) | |
| goto done; | |
| /* | |
| * ACPI is disabled at this point. Enable it in order to parse | |
| * the ACPI tables and carry out sanity checks | |
| */ | |
| enable_acpi(); | |
| /* | |
| * If ACPI tables are initialized and FADT sanity checks passed, | |
| * leave ACPI enabled and carry on booting; otherwise disable ACPI | |
| * on initialization error. | |
| * If acpi=force was passed on the command line it forces ACPI | |
| * to be enabled even if its initialization failed. | |
| */ | |
| if (acpi_table_init() || acpi_fadt_sanity_check()) { | |
| pr_err("Failed to init ACPI tables\n"); | |
| if (!param_acpi_force) | |
| disable_acpi(); | |
| } | |
| done: | |
| if (acpi_disabled) { | |
| if (earlycon_acpi_spcr_enable) | |
| early_init_dt_scan_chosen_stdout(); | |
| } else { | |
| acpi_parse_spcr(earlycon_acpi_spcr_enable, true); | |
| if (IS_ENABLED(CONFIG_ACPI_BGRT)) | |
| acpi_table_parse(ACPI_SIG_BGRT, acpi_parse_bgrt); | |
| } | |
| } | |
| pgprot_t __acpi_get_mem_attribute(phys_addr_t addr) | |
| { | |
| /* | |
| * According to "Table 8 Map: EFI memory types to AArch64 memory | |
| * types" of UEFI 2.5 section 2.3.6.1, each EFI memory type is | |
| * mapped to a corresponding MAIR attribute encoding. | |
| * The EFI memory attribute advises all possible capabilities | |
| * of a memory region. We use the most efficient capability. | |
| */ | |
| u64 attr; | |
| attr = efi_mem_attributes(addr); | |
| if (attr & EFI_MEMORY_WB) | |
| return PAGE_KERNEL; | |
| if (attr & EFI_MEMORY_WT) | |
| return __pgprot(PROT_NORMAL_WT); | |
| if (attr & EFI_MEMORY_WC) | |
| return __pgprot(PROT_NORMAL_NC); | |
| return __pgprot(PROT_DEVICE_nGnRnE); | |
| } | |
| void __iomem *acpi_os_ioremap(acpi_physical_address phys, acpi_size size) | |
| { | |
| efi_memory_desc_t *md, *region = NULL; | |
| pgprot_t prot; | |
| if (WARN_ON_ONCE(!efi_enabled(EFI_MEMMAP))) | |
| return NULL; | |
| for_each_efi_memory_desc(md) { | |
| u64 end = md->phys_addr + (md->num_pages << EFI_PAGE_SHIFT); | |
| if (phys < md->phys_addr || phys >= end) | |
| continue; | |
| if (phys + size > end) { | |
| pr_warn(FW_BUG "requested region covers multiple EFI memory regions\n"); | |
| return NULL; | |
| } | |
| region = md; | |
| break; | |
| } | |
| /* | |
| * It is fine for AML to remap regions that are not represented in the | |
| * EFI memory map at all, as it only describes normal memory, and MMIO | |
| * regions that require a virtual mapping to make them accessible to | |
| * the EFI runtime services. | |
| */ | |
| prot = __pgprot(PROT_DEVICE_nGnRnE); | |
| if (region) { | |
| switch (region->type) { | |
| case EFI_LOADER_CODE: | |
| case EFI_LOADER_DATA: | |
| case EFI_BOOT_SERVICES_CODE: | |
| case EFI_BOOT_SERVICES_DATA: | |
| case EFI_CONVENTIONAL_MEMORY: | |
| case EFI_PERSISTENT_MEMORY: | |
| if (memblock_is_map_memory(phys) || | |
| !memblock_is_region_memory(phys, size)) { | |
| pr_warn(FW_BUG "requested region covers kernel memory @ %pa\n", &phys); | |
| return NULL; | |
| } | |
| /* | |
| * Mapping kernel memory is permitted if the region in | |
| * question is covered by a single memblock with the | |
| * NOMAP attribute set: this enables the use of ACPI | |
| * table overrides passed via initramfs, which are | |
| * reserved in memory using arch_reserve_mem_area() | |
| * below. As this particular use case only requires | |
| * read access, fall through to the R/O mapping case. | |
| */ | |
| fallthrough; | |
| case EFI_RUNTIME_SERVICES_CODE: | |
| /* | |
| * This would be unusual, but not problematic per se, | |
| * as long as we take care not to create a writable | |
| * mapping for executable code. | |
| */ | |
| prot = PAGE_KERNEL_RO; | |
| break; | |
| case EFI_ACPI_RECLAIM_MEMORY: | |
| /* | |
| * ACPI reclaim memory is used to pass firmware tables | |
| * and other data that is intended for consumption by | |
| * the OS only, which may decide it wants to reclaim | |
| * that memory and use it for something else. We never | |
| * do that, but we usually add it to the linear map | |
| * anyway, in which case we should use the existing | |
| * mapping. | |
| */ | |
| if (memblock_is_map_memory(phys)) | |
| return (void __iomem *)__phys_to_virt(phys); | |
| fallthrough; | |
| default: | |
| if (region->attribute & EFI_MEMORY_WB) | |
| prot = PAGE_KERNEL; | |
| else if (region->attribute & EFI_MEMORY_WT) | |
| prot = __pgprot(PROT_NORMAL_WT); | |
| else if (region->attribute & EFI_MEMORY_WC) | |
| prot = __pgprot(PROT_NORMAL_NC); | |
| } | |
| } | |
| return __ioremap(phys, size, prot); | |
| } | |
| /* | |
| * Claim Synchronous External Aborts as a firmware first notification. | |
| * | |
| * Used by KVM and the arch do_sea handler. | |
| * @regs may be NULL when called from process context. | |
| */ | |
| int apei_claim_sea(struct pt_regs *regs) | |
| { | |
| int err = -ENOENT; | |
| bool return_to_irqs_enabled; | |
| unsigned long current_flags; | |
| if (!IS_ENABLED(CONFIG_ACPI_APEI_GHES)) | |
| return err; | |
| current_flags = local_daif_save_flags(); | |
| /* current_flags isn't useful here as daif doesn't tell us about pNMI */ | |
| return_to_irqs_enabled = !irqs_disabled_flags(arch_local_save_flags()); | |
| if (regs) | |
| return_to_irqs_enabled = interrupts_enabled(regs); | |
| /* | |
| * SEA can interrupt SError, mask it and describe this as an NMI so | |
| * that APEI defers the handling. | |
| */ | |
| local_daif_restore(DAIF_ERRCTX); | |
| nmi_enter(); | |
| err = ghes_notify_sea(); | |
| nmi_exit(); | |
| /* | |
| * APEI NMI-like notifications are deferred to irq_work. Unless | |
| * we interrupted irqs-masked code, we can do that now. | |
| */ | |
| if (!err) { | |
| if (return_to_irqs_enabled) { | |
| local_daif_restore(DAIF_PROCCTX_NOIRQ); | |
| __irq_enter(); | |
| irq_work_run(); | |
| __irq_exit(); | |
| } else { | |
| pr_warn_ratelimited("APEI work queued but not completed"); | |
| err = -EINPROGRESS; | |
| } | |
| } | |
| local_daif_restore(current_flags); | |
| return err; | |
| } | |
| void arch_reserve_mem_area(acpi_physical_address addr, size_t size) | |
| { | |
| memblock_mark_nomap(addr, size); | |
| } |