| /* | |
| * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu> | |
| * Copyright (C) 2008-2009 PetaLogix | |
| * Copyright (C) 2007 John Williams | |
| * | |
| * Reasonably optimised generic C-code for memcpy on Microblaze | |
| * This is generic C code to do efficient, alignment-aware memmove. | |
| * | |
| * It is based on demo code originally Copyright 2001 by Intel Corp, taken from | |
| * http://www.embedded.com/showArticle.jhtml?articleID=19205567 | |
| * | |
| * Attempts were made, unsuccessfully, to contact the original | |
| * author of this code (Michael Morrow, Intel). Below is the original | |
| * copyright notice. | |
| * | |
| * This software has been developed by Intel Corporation. | |
| * Intel specifically disclaims all warranties, express or | |
| * implied, and all liability, including consequential and | |
| * other indirect damages, for the use of this program, including | |
| * liability for infringement of any proprietary rights, | |
| * and including the warranties of merchantability and fitness | |
| * for a particular purpose. Intel does not assume any | |
| * responsibility for and errors which may appear in this program | |
| * not any responsibility to update it. | |
| */ | |
| #include <linux/export.h> | |
| #include <linux/types.h> | |
| #include <linux/stddef.h> | |
| #include <linux/compiler.h> | |
| #include <linux/string.h> | |
| #ifdef __HAVE_ARCH_MEMMOVE | |
| #ifndef CONFIG_OPT_LIB_FUNCTION | |
| void *memmove(void *v_dst, const void *v_src, __kernel_size_t c) | |
| { | |
| const char *src = v_src; | |
| char *dst = v_dst; | |
| if (!c) | |
| return v_dst; | |
| /* Use memcpy when source is higher than dest */ | |
| if (v_dst <= v_src) | |
| return memcpy(v_dst, v_src, c); | |
| /* copy backwards, from end to beginning */ | |
| src += c; | |
| dst += c; | |
| /* Simple, byte oriented memmove. */ | |
| while (c--) | |
| *--dst = *--src; | |
| return v_dst; | |
| } | |
| #else /* CONFIG_OPT_LIB_FUNCTION */ | |
| void *memmove(void *v_dst, const void *v_src, __kernel_size_t c) | |
| { | |
| const char *src = v_src; | |
| char *dst = v_dst; | |
| const uint32_t *i_src; | |
| uint32_t *i_dst; | |
| if (!c) | |
| return v_dst; | |
| /* Use memcpy when source is higher than dest */ | |
| if (v_dst <= v_src) | |
| return memcpy(v_dst, v_src, c); | |
| /* The following code tries to optimize the copy by using unsigned | |
| * alignment. This will work fine if both source and destination are | |
| * aligned on the same boundary. However, if they are aligned on | |
| * different boundaries shifts will be necessary. This might result in | |
| * bad performance on MicroBlaze systems without a barrel shifter. | |
| */ | |
| /* FIXME this part needs more test */ | |
| /* Do a descending copy - this is a bit trickier! */ | |
| dst += c; | |
| src += c; | |
| if (c >= 4) { | |
| unsigned value, buf_hold; | |
| /* Align the destination to a word boundary. */ | |
| /* This is done in an endian independent manner. */ | |
| switch ((unsigned long)dst & 3) { | |
| case 3: | |
| *--dst = *--src; | |
| --c; | |
| case 2: | |
| *--dst = *--src; | |
| --c; | |
| case 1: | |
| *--dst = *--src; | |
| --c; | |
| } | |
| i_dst = (void *)dst; | |
| /* Choose a copy scheme based on the source */ | |
| /* alignment relative to dstination. */ | |
| switch ((unsigned long)src & 3) { | |
| case 0x0: /* Both byte offsets are aligned */ | |
| i_src = (const void *)src; | |
| for (; c >= 4; c -= 4) | |
| *--i_dst = *--i_src; | |
| src = (const void *)i_src; | |
| break; | |
| case 0x1: /* Unaligned - Off by 1 */ | |
| /* Word align the source */ | |
| i_src = (const void *) (((unsigned)src + 4) & ~3); | |
| #ifndef __MICROBLAZEEL__ | |
| /* Load the holding buffer */ | |
| buf_hold = *--i_src >> 24; | |
| for (; c >= 4; c -= 4) { | |
| value = *--i_src; | |
| *--i_dst = buf_hold << 8 | value; | |
| buf_hold = value >> 24; | |
| } | |
| #else | |
| /* Load the holding buffer */ | |
| buf_hold = (*--i_src & 0xFF) << 24; | |
| for (; c >= 4; c -= 4) { | |
| value = *--i_src; | |
| *--i_dst = buf_hold | | |
| ((value & 0xFFFFFF00) >> 8); | |
| buf_hold = (value & 0xFF) << 24; | |
| } | |
| #endif | |
| /* Realign the source */ | |
| src = (const void *)i_src; | |
| src += 1; | |
| break; | |
| case 0x2: /* Unaligned - Off by 2 */ | |
| /* Word align the source */ | |
| i_src = (const void *) (((unsigned)src + 4) & ~3); | |
| #ifndef __MICROBLAZEEL__ | |
| /* Load the holding buffer */ | |
| buf_hold = *--i_src >> 16; | |
| for (; c >= 4; c -= 4) { | |
| value = *--i_src; | |
| *--i_dst = buf_hold << 16 | value; | |
| buf_hold = value >> 16; | |
| } | |
| #else | |
| /* Load the holding buffer */ | |
| buf_hold = (*--i_src & 0xFFFF) << 16; | |
| for (; c >= 4; c -= 4) { | |
| value = *--i_src; | |
| *--i_dst = buf_hold | | |
| ((value & 0xFFFF0000) >> 16); | |
| buf_hold = (value & 0xFFFF) << 16; | |
| } | |
| #endif | |
| /* Realign the source */ | |
| src = (const void *)i_src; | |
| src += 2; | |
| break; | |
| case 0x3: /* Unaligned - Off by 3 */ | |
| /* Word align the source */ | |
| i_src = (const void *) (((unsigned)src + 4) & ~3); | |
| #ifndef __MICROBLAZEEL__ | |
| /* Load the holding buffer */ | |
| buf_hold = *--i_src >> 8; | |
| for (; c >= 4; c -= 4) { | |
| value = *--i_src; | |
| *--i_dst = buf_hold << 24 | value; | |
| buf_hold = value >> 8; | |
| } | |
| #else | |
| /* Load the holding buffer */ | |
| buf_hold = (*--i_src & 0xFFFFFF) << 8; | |
| for (; c >= 4; c -= 4) { | |
| value = *--i_src; | |
| *--i_dst = buf_hold | | |
| ((value & 0xFF000000) >> 24); | |
| buf_hold = (value & 0xFFFFFF) << 8; | |
| } | |
| #endif | |
| /* Realign the source */ | |
| src = (const void *)i_src; | |
| src += 3; | |
| break; | |
| } | |
| dst = (void *)i_dst; | |
| } | |
| /* simple fast copy, ... unless a cache boundary is crossed */ | |
| /* Finish off any remaining bytes */ | |
| switch (c) { | |
| case 4: | |
| *--dst = *--src; | |
| case 3: | |
| *--dst = *--src; | |
| case 2: | |
| *--dst = *--src; | |
| case 1: | |
| *--dst = *--src; | |
| } | |
| return v_dst; | |
| } | |
| #endif /* CONFIG_OPT_LIB_FUNCTION */ | |
| EXPORT_SYMBOL(memmove); | |
| #endif /* __HAVE_ARCH_MEMMOVE */ |