| // SPDX-License-Identifier: GPL-2.0-or-later | |
| /* | |
| * Processor capabilities determination functions. | |
| * | |
| * Copyright (C) xxxx the Anonymous | |
| * Copyright (C) 1994 - 2006 Ralf Baechle | |
| * Copyright (C) 2003, 2004 Maciej W. Rozycki | |
| * Copyright (C) 2001, 2004, 2011, 2012 MIPS Technologies, Inc. | |
| */ | |
| #include <linux/init.h> | |
| #include <linux/kernel.h> | |
| #include <linux/ptrace.h> | |
| #include <linux/smp.h> | |
| #include <linux/stddef.h> | |
| #include <linux/export.h> | |
| #include <asm/bugs.h> | |
| #include <asm/cpu.h> | |
| #include <asm/cpu-features.h> | |
| #include <asm/cpu-type.h> | |
| #include <asm/fpu.h> | |
| #include <asm/mipsregs.h> | |
| #include <asm/mipsmtregs.h> | |
| #include <asm/msa.h> | |
| #include <asm/watch.h> | |
| #include <asm/elf.h> | |
| #include <asm/pgtable-bits.h> | |
| #include <asm/spram.h> | |
| #include <linux/uaccess.h> | |
| #include "fpu-probe.h" | |
| #include <asm/mach-loongson64/cpucfg-emul.h> | |
| /* Hardware capabilities */ | |
| unsigned int elf_hwcap __read_mostly; | |
| EXPORT_SYMBOL_GPL(elf_hwcap); | |
| static inline unsigned long cpu_get_msa_id(void) | |
| { | |
| unsigned long status, msa_id; | |
| status = read_c0_status(); | |
| __enable_fpu(FPU_64BIT); | |
| enable_msa(); | |
| msa_id = read_msa_ir(); | |
| disable_msa(); | |
| write_c0_status(status); | |
| return msa_id; | |
| } | |
| static int mips_dsp_disabled; | |
| static int __init dsp_disable(char *s) | |
| { | |
| cpu_data[0].ases &= ~(MIPS_ASE_DSP | MIPS_ASE_DSP2P); | |
| mips_dsp_disabled = 1; | |
| return 1; | |
| } | |
| __setup("nodsp", dsp_disable); | |
| static int mips_htw_disabled; | |
| static int __init htw_disable(char *s) | |
| { | |
| mips_htw_disabled = 1; | |
| cpu_data[0].options &= ~MIPS_CPU_HTW; | |
| write_c0_pwctl(read_c0_pwctl() & | |
| ~(1 << MIPS_PWCTL_PWEN_SHIFT)); | |
| return 1; | |
| } | |
| __setup("nohtw", htw_disable); | |
| static int mips_ftlb_disabled; | |
| static int mips_has_ftlb_configured; | |
| enum ftlb_flags { | |
| FTLB_EN = 1 << 0, | |
| FTLB_SET_PROB = 1 << 1, | |
| }; | |
| static int set_ftlb_enable(struct cpuinfo_mips *c, enum ftlb_flags flags); | |
| static int __init ftlb_disable(char *s) | |
| { | |
| unsigned int config4, mmuextdef; | |
| /* | |
| * If the core hasn't done any FTLB configuration, there is nothing | |
| * for us to do here. | |
| */ | |
| if (!mips_has_ftlb_configured) | |
| return 1; | |
| /* Disable it in the boot cpu */ | |
| if (set_ftlb_enable(&cpu_data[0], 0)) { | |
| pr_warn("Can't turn FTLB off\n"); | |
| return 1; | |
| } | |
| config4 = read_c0_config4(); | |
| /* Check that FTLB has been disabled */ | |
| mmuextdef = config4 & MIPS_CONF4_MMUEXTDEF; | |
| /* MMUSIZEEXT == VTLB ON, FTLB OFF */ | |
| if (mmuextdef == MIPS_CONF4_MMUEXTDEF_FTLBSIZEEXT) { | |
| /* This should never happen */ | |
| pr_warn("FTLB could not be disabled!\n"); | |
| return 1; | |
| } | |
| mips_ftlb_disabled = 1; | |
| mips_has_ftlb_configured = 0; | |
| /* | |
| * noftlb is mainly used for debug purposes so print | |
| * an informative message instead of using pr_debug() | |
| */ | |
| pr_info("FTLB has been disabled\n"); | |
| /* | |
| * Some of these bits are duplicated in the decode_config4. | |
| * MIPS_CONF4_MMUEXTDEF_MMUSIZEEXT is the only possible case | |
| * once FTLB has been disabled so undo what decode_config4 did. | |
| */ | |
| cpu_data[0].tlbsize -= cpu_data[0].tlbsizeftlbways * | |
| cpu_data[0].tlbsizeftlbsets; | |
| cpu_data[0].tlbsizeftlbsets = 0; | |
| cpu_data[0].tlbsizeftlbways = 0; | |
| return 1; | |
| } | |
| __setup("noftlb", ftlb_disable); | |
| /* | |
| * Check if the CPU has per tc perf counters | |
| */ | |
| static inline void cpu_set_mt_per_tc_perf(struct cpuinfo_mips *c) | |
| { | |
| if (read_c0_config7() & MTI_CONF7_PTC) | |
| c->options |= MIPS_CPU_MT_PER_TC_PERF_COUNTERS; | |
| } | |
| static inline void check_errata(void) | |
| { | |
| struct cpuinfo_mips *c = ¤t_cpu_data; | |
| switch (current_cpu_type()) { | |
| case CPU_34K: | |
| /* | |
| * Erratum "RPS May Cause Incorrect Instruction Execution" | |
| * This code only handles VPE0, any SMP/RTOS code | |
| * making use of VPE1 will be responsable for that VPE. | |
| */ | |
| if ((c->processor_id & PRID_REV_MASK) <= PRID_REV_34K_V1_0_2) | |
| write_c0_config7(read_c0_config7() | MIPS_CONF7_RPS); | |
| break; | |
| default: | |
| break; | |
| } | |
| } | |
| void __init check_bugs32(void) | |
| { | |
| check_errata(); | |
| } | |
| /* | |
| * Probe whether cpu has config register by trying to play with | |
| * alternate cache bit and see whether it matters. | |
| * It's used by cpu_probe to distinguish between R3000A and R3081. | |
| */ | |
| static inline int cpu_has_confreg(void) | |
| { | |
| #ifdef CONFIG_CPU_R3000 | |
| extern unsigned long r3k_cache_size(unsigned long); | |
| unsigned long size1, size2; | |
| unsigned long cfg = read_c0_conf(); | |
| size1 = r3k_cache_size(ST0_ISC); | |
| write_c0_conf(cfg ^ R30XX_CONF_AC); | |
| size2 = r3k_cache_size(ST0_ISC); | |
| write_c0_conf(cfg); | |
| return size1 != size2; | |
| #else | |
| return 0; | |
| #endif | |
| } | |
| static inline void set_elf_platform(int cpu, const char *plat) | |
| { | |
| if (cpu == 0) | |
| __elf_platform = plat; | |
| } | |
| static inline void set_elf_base_platform(const char *plat) | |
| { | |
| if (__elf_base_platform == NULL) { | |
| __elf_base_platform = plat; | |
| } | |
| } | |
| static inline void cpu_probe_vmbits(struct cpuinfo_mips *c) | |
| { | |
| #ifdef __NEED_VMBITS_PROBE | |
| write_c0_entryhi(0x3fffffffffffe000ULL); | |
| back_to_back_c0_hazard(); | |
| c->vmbits = fls64(read_c0_entryhi() & 0x3fffffffffffe000ULL); | |
| #endif | |
| } | |
| static void set_isa(struct cpuinfo_mips *c, unsigned int isa) | |
| { | |
| switch (isa) { | |
| case MIPS_CPU_ISA_M64R5: | |
| c->isa_level |= MIPS_CPU_ISA_M32R5 | MIPS_CPU_ISA_M64R5; | |
| set_elf_base_platform("mips64r5"); | |
| fallthrough; | |
| case MIPS_CPU_ISA_M64R2: | |
| c->isa_level |= MIPS_CPU_ISA_M32R2 | MIPS_CPU_ISA_M64R2; | |
| set_elf_base_platform("mips64r2"); | |
| fallthrough; | |
| case MIPS_CPU_ISA_M64R1: | |
| c->isa_level |= MIPS_CPU_ISA_M32R1 | MIPS_CPU_ISA_M64R1; | |
| set_elf_base_platform("mips64"); | |
| fallthrough; | |
| case MIPS_CPU_ISA_V: | |
| c->isa_level |= MIPS_CPU_ISA_V; | |
| set_elf_base_platform("mips5"); | |
| fallthrough; | |
| case MIPS_CPU_ISA_IV: | |
| c->isa_level |= MIPS_CPU_ISA_IV; | |
| set_elf_base_platform("mips4"); | |
| fallthrough; | |
| case MIPS_CPU_ISA_III: | |
| c->isa_level |= MIPS_CPU_ISA_II | MIPS_CPU_ISA_III; | |
| set_elf_base_platform("mips3"); | |
| break; | |
| /* R6 incompatible with everything else */ | |
| case MIPS_CPU_ISA_M64R6: | |
| c->isa_level |= MIPS_CPU_ISA_M32R6 | MIPS_CPU_ISA_M64R6; | |
| set_elf_base_platform("mips64r6"); | |
| fallthrough; | |
| case MIPS_CPU_ISA_M32R6: | |
| c->isa_level |= MIPS_CPU_ISA_M32R6; | |
| set_elf_base_platform("mips32r6"); | |
| /* Break here so we don't add incompatible ISAs */ | |
| break; | |
| case MIPS_CPU_ISA_M32R5: | |
| c->isa_level |= MIPS_CPU_ISA_M32R5; | |
| set_elf_base_platform("mips32r5"); | |
| fallthrough; | |
| case MIPS_CPU_ISA_M32R2: | |
| c->isa_level |= MIPS_CPU_ISA_M32R2; | |
| set_elf_base_platform("mips32r2"); | |
| fallthrough; | |
| case MIPS_CPU_ISA_M32R1: | |
| c->isa_level |= MIPS_CPU_ISA_M32R1; | |
| set_elf_base_platform("mips32"); | |
| fallthrough; | |
| case MIPS_CPU_ISA_II: | |
| c->isa_level |= MIPS_CPU_ISA_II; | |
| set_elf_base_platform("mips2"); | |
| break; | |
| } | |
| } | |
| static char unknown_isa[] = KERN_ERR \ | |
| "Unsupported ISA type, c0.config0: %d."; | |
| static unsigned int calculate_ftlb_probability(struct cpuinfo_mips *c) | |
| { | |
| unsigned int probability = c->tlbsize / c->tlbsizevtlb; | |
| /* | |
| * 0 = All TLBWR instructions go to FTLB | |
| * 1 = 15:1: For every 16 TBLWR instructions, 15 go to the | |
| * FTLB and 1 goes to the VTLB. | |
| * 2 = 7:1: As above with 7:1 ratio. | |
| * 3 = 3:1: As above with 3:1 ratio. | |
| * | |
| * Use the linear midpoint as the probability threshold. | |
| */ | |
| if (probability >= 12) | |
| return 1; | |
| else if (probability >= 6) | |
| return 2; | |
| else | |
| /* | |
| * So FTLB is less than 4 times bigger than VTLB. | |
| * A 3:1 ratio can still be useful though. | |
| */ | |
| return 3; | |
| } | |
| static int set_ftlb_enable(struct cpuinfo_mips *c, enum ftlb_flags flags) | |
| { | |
| unsigned int config; | |
| /* It's implementation dependent how the FTLB can be enabled */ | |
| switch (c->cputype) { | |
| case CPU_PROAPTIV: | |
| case CPU_P5600: | |
| case CPU_P6600: | |
| /* proAptiv & related cores use Config6 to enable the FTLB */ | |
| config = read_c0_config6(); | |
| if (flags & FTLB_EN) | |
| config |= MTI_CONF6_FTLBEN; | |
| else | |
| config &= ~MTI_CONF6_FTLBEN; | |
| if (flags & FTLB_SET_PROB) { | |
| config &= ~(3 << MTI_CONF6_FTLBP_SHIFT); | |
| config |= calculate_ftlb_probability(c) | |
| << MTI_CONF6_FTLBP_SHIFT; | |
| } | |
| write_c0_config6(config); | |
| back_to_back_c0_hazard(); | |
| break; | |
| case CPU_I6400: | |
| case CPU_I6500: | |
| /* There's no way to disable the FTLB */ | |
| if (!(flags & FTLB_EN)) | |
| return 1; | |
| return 0; | |
| case CPU_LOONGSON64: | |
| /* Flush ITLB, DTLB, VTLB and FTLB */ | |
| write_c0_diag(LOONGSON_DIAG_ITLB | LOONGSON_DIAG_DTLB | | |
| LOONGSON_DIAG_VTLB | LOONGSON_DIAG_FTLB); | |
| /* Loongson-3 cores use Config6 to enable the FTLB */ | |
| config = read_c0_config6(); | |
| if (flags & FTLB_EN) | |
| /* Enable FTLB */ | |
| write_c0_config6(config & ~LOONGSON_CONF6_FTLBDIS); | |
| else | |
| /* Disable FTLB */ | |
| write_c0_config6(config | LOONGSON_CONF6_FTLBDIS); | |
| break; | |
| default: | |
| return 1; | |
| } | |
| return 0; | |
| } | |
| static int mm_config(struct cpuinfo_mips *c) | |
| { | |
| unsigned int config0, update, mm; | |
| config0 = read_c0_config(); | |
| mm = config0 & MIPS_CONF_MM; | |
| /* | |
| * It's implementation dependent what type of write-merge is supported | |
| * and whether it can be enabled/disabled. If it is settable lets make | |
| * the merging allowed by default. Some platforms might have | |
| * write-through caching unsupported. In this case just ignore the | |
| * CP0.Config.MM bit field value. | |
| */ | |
| switch (c->cputype) { | |
| case CPU_24K: | |
| case CPU_34K: | |
| case CPU_74K: | |
| case CPU_P5600: | |
| case CPU_P6600: | |
| c->options |= MIPS_CPU_MM_FULL; | |
| update = MIPS_CONF_MM_FULL; | |
| break; | |
| case CPU_1004K: | |
| case CPU_1074K: | |
| case CPU_INTERAPTIV: | |
| case CPU_PROAPTIV: | |
| mm = 0; | |
| fallthrough; | |
| default: | |
| update = 0; | |
| break; | |
| } | |
| if (update) { | |
| config0 = (config0 & ~MIPS_CONF_MM) | update; | |
| write_c0_config(config0); | |
| } else if (mm == MIPS_CONF_MM_SYSAD) { | |
| c->options |= MIPS_CPU_MM_SYSAD; | |
| } else if (mm == MIPS_CONF_MM_FULL) { | |
| c->options |= MIPS_CPU_MM_FULL; | |
| } | |
| return 0; | |
| } | |
| static inline unsigned int decode_config0(struct cpuinfo_mips *c) | |
| { | |
| unsigned int config0; | |
| int isa, mt; | |
| config0 = read_c0_config(); | |
| /* | |
| * Look for Standard TLB or Dual VTLB and FTLB | |
| */ | |
| mt = config0 & MIPS_CONF_MT; | |
| if (mt == MIPS_CONF_MT_TLB) | |
| c->options |= MIPS_CPU_TLB; | |
| else if (mt == MIPS_CONF_MT_FTLB) | |
| c->options |= MIPS_CPU_TLB | MIPS_CPU_FTLB; | |
| isa = (config0 & MIPS_CONF_AT) >> 13; | |
| switch (isa) { | |
| case 0: | |
| switch ((config0 & MIPS_CONF_AR) >> 10) { | |
| case 0: | |
| set_isa(c, MIPS_CPU_ISA_M32R1); | |
| break; | |
| case 1: | |
| set_isa(c, MIPS_CPU_ISA_M32R2); | |
| break; | |
| case 2: | |
| set_isa(c, MIPS_CPU_ISA_M32R6); | |
| break; | |
| default: | |
| goto unknown; | |
| } | |
| break; | |
| case 2: | |
| switch ((config0 & MIPS_CONF_AR) >> 10) { | |
| case 0: | |
| set_isa(c, MIPS_CPU_ISA_M64R1); | |
| break; | |
| case 1: | |
| set_isa(c, MIPS_CPU_ISA_M64R2); | |
| break; | |
| case 2: | |
| set_isa(c, MIPS_CPU_ISA_M64R6); | |
| break; | |
| default: | |
| goto unknown; | |
| } | |
| break; | |
| default: | |
| goto unknown; | |
| } | |
| return config0 & MIPS_CONF_M; | |
| unknown: | |
| panic(unknown_isa, config0); | |
| } | |
| static inline unsigned int decode_config1(struct cpuinfo_mips *c) | |
| { | |
| unsigned int config1; | |
| config1 = read_c0_config1(); | |
| if (config1 & MIPS_CONF1_MD) | |
| c->ases |= MIPS_ASE_MDMX; | |
| if (config1 & MIPS_CONF1_PC) | |
| c->options |= MIPS_CPU_PERF; | |
| if (config1 & MIPS_CONF1_WR) | |
| c->options |= MIPS_CPU_WATCH; | |
| if (config1 & MIPS_CONF1_CA) | |
| c->ases |= MIPS_ASE_MIPS16; | |
| if (config1 & MIPS_CONF1_EP) | |
| c->options |= MIPS_CPU_EJTAG; | |
| if (config1 & MIPS_CONF1_FP) { | |
| c->options |= MIPS_CPU_FPU; | |
| c->options |= MIPS_CPU_32FPR; | |
| } | |
| if (cpu_has_tlb) { | |
| c->tlbsize = ((config1 & MIPS_CONF1_TLBS) >> 25) + 1; | |
| c->tlbsizevtlb = c->tlbsize; | |
| c->tlbsizeftlbsets = 0; | |
| } | |
| return config1 & MIPS_CONF_M; | |
| } | |
| static inline unsigned int decode_config2(struct cpuinfo_mips *c) | |
| { | |
| unsigned int config2; | |
| config2 = read_c0_config2(); | |
| if (config2 & MIPS_CONF2_SL) | |
| c->scache.flags &= ~MIPS_CACHE_NOT_PRESENT; | |
| return config2 & MIPS_CONF_M; | |
| } | |
| static inline unsigned int decode_config3(struct cpuinfo_mips *c) | |
| { | |
| unsigned int config3; | |
| config3 = read_c0_config3(); | |
| if (config3 & MIPS_CONF3_SM) { | |
| c->ases |= MIPS_ASE_SMARTMIPS; | |
| c->options |= MIPS_CPU_RIXI | MIPS_CPU_CTXTC; | |
| } | |
| if (config3 & MIPS_CONF3_RXI) | |
| c->options |= MIPS_CPU_RIXI; | |
| if (config3 & MIPS_CONF3_CTXTC) | |
| c->options |= MIPS_CPU_CTXTC; | |
| if (config3 & MIPS_CONF3_DSP) | |
| c->ases |= MIPS_ASE_DSP; | |
| if (config3 & MIPS_CONF3_DSP2P) { | |
| c->ases |= MIPS_ASE_DSP2P; | |
| if (cpu_has_mips_r6) | |
| c->ases |= MIPS_ASE_DSP3; | |
| } | |
| if (config3 & MIPS_CONF3_VINT) | |
| c->options |= MIPS_CPU_VINT; | |
| if (config3 & MIPS_CONF3_VEIC) | |
| c->options |= MIPS_CPU_VEIC; | |
| if (config3 & MIPS_CONF3_LPA) | |
| c->options |= MIPS_CPU_LPA; | |
| if (config3 & MIPS_CONF3_MT) | |
| c->ases |= MIPS_ASE_MIPSMT; | |
| if (config3 & MIPS_CONF3_ULRI) | |
| c->options |= MIPS_CPU_ULRI; | |
| if (config3 & MIPS_CONF3_ISA) | |
| c->options |= MIPS_CPU_MICROMIPS; | |
| if (config3 & MIPS_CONF3_VZ) | |
| c->ases |= MIPS_ASE_VZ; | |
| if (config3 & MIPS_CONF3_SC) | |
| c->options |= MIPS_CPU_SEGMENTS; | |
| if (config3 & MIPS_CONF3_BI) | |
| c->options |= MIPS_CPU_BADINSTR; | |
| if (config3 & MIPS_CONF3_BP) | |
| c->options |= MIPS_CPU_BADINSTRP; | |
| if (config3 & MIPS_CONF3_MSA) | |
| c->ases |= MIPS_ASE_MSA; | |
| if (config3 & MIPS_CONF3_PW) { | |
| c->htw_seq = 0; | |
| c->options |= MIPS_CPU_HTW; | |
| } | |
| if (config3 & MIPS_CONF3_CDMM) | |
| c->options |= MIPS_CPU_CDMM; | |
| if (config3 & MIPS_CONF3_SP) | |
| c->options |= MIPS_CPU_SP; | |
| return config3 & MIPS_CONF_M; | |
| } | |
| static inline unsigned int decode_config4(struct cpuinfo_mips *c) | |
| { | |
| unsigned int config4; | |
| unsigned int newcf4; | |
| unsigned int mmuextdef; | |
| unsigned int ftlb_page = MIPS_CONF4_FTLBPAGESIZE; | |
| unsigned long asid_mask; | |
| config4 = read_c0_config4(); | |
| if (cpu_has_tlb) { | |
| if (((config4 & MIPS_CONF4_IE) >> 29) == 2) | |
| c->options |= MIPS_CPU_TLBINV; | |
| /* | |
| * R6 has dropped the MMUExtDef field from config4. | |
| * On R6 the fields always describe the FTLB, and only if it is | |
| * present according to Config.MT. | |
| */ | |
| if (!cpu_has_mips_r6) | |
| mmuextdef = config4 & MIPS_CONF4_MMUEXTDEF; | |
| else if (cpu_has_ftlb) | |
| mmuextdef = MIPS_CONF4_MMUEXTDEF_VTLBSIZEEXT; | |
| else | |
| mmuextdef = 0; | |
| switch (mmuextdef) { | |
| case MIPS_CONF4_MMUEXTDEF_MMUSIZEEXT: | |
| c->tlbsize += (config4 & MIPS_CONF4_MMUSIZEEXT) * 0x40; | |
| c->tlbsizevtlb = c->tlbsize; | |
| break; | |
| case MIPS_CONF4_MMUEXTDEF_VTLBSIZEEXT: | |
| c->tlbsizevtlb += | |
| ((config4 & MIPS_CONF4_VTLBSIZEEXT) >> | |
| MIPS_CONF4_VTLBSIZEEXT_SHIFT) * 0x40; | |
| c->tlbsize = c->tlbsizevtlb; | |
| ftlb_page = MIPS_CONF4_VFTLBPAGESIZE; | |
| fallthrough; | |
| case MIPS_CONF4_MMUEXTDEF_FTLBSIZEEXT: | |
| if (mips_ftlb_disabled) | |
| break; | |
| newcf4 = (config4 & ~ftlb_page) | | |
| (page_size_ftlb(mmuextdef) << | |
| MIPS_CONF4_FTLBPAGESIZE_SHIFT); | |
| write_c0_config4(newcf4); | |
| back_to_back_c0_hazard(); | |
| config4 = read_c0_config4(); | |
| if (config4 != newcf4) { | |
| pr_err("PAGE_SIZE 0x%lx is not supported by FTLB (config4=0x%x)\n", | |
| PAGE_SIZE, config4); | |
| /* Switch FTLB off */ | |
| set_ftlb_enable(c, 0); | |
| mips_ftlb_disabled = 1; | |
| break; | |
| } | |
| c->tlbsizeftlbsets = 1 << | |
| ((config4 & MIPS_CONF4_FTLBSETS) >> | |
| MIPS_CONF4_FTLBSETS_SHIFT); | |
| c->tlbsizeftlbways = ((config4 & MIPS_CONF4_FTLBWAYS) >> | |
| MIPS_CONF4_FTLBWAYS_SHIFT) + 2; | |
| c->tlbsize += c->tlbsizeftlbways * c->tlbsizeftlbsets; | |
| mips_has_ftlb_configured = 1; | |
| break; | |
| } | |
| } | |
| c->kscratch_mask = (config4 & MIPS_CONF4_KSCREXIST) | |
| >> MIPS_CONF4_KSCREXIST_SHIFT; | |
| asid_mask = MIPS_ENTRYHI_ASID; | |
| if (config4 & MIPS_CONF4_AE) | |
| asid_mask |= MIPS_ENTRYHI_ASIDX; | |
| set_cpu_asid_mask(c, asid_mask); | |
| /* | |
| * Warn if the computed ASID mask doesn't match the mask the kernel | |
| * is built for. This may indicate either a serious problem or an | |
| * easy optimisation opportunity, but either way should be addressed. | |
| */ | |
| WARN_ON(asid_mask != cpu_asid_mask(c)); | |
| return config4 & MIPS_CONF_M; | |
| } | |
| static inline unsigned int decode_config5(struct cpuinfo_mips *c) | |
| { | |
| unsigned int config5, max_mmid_width; | |
| unsigned long asid_mask; | |
| config5 = read_c0_config5(); | |
| config5 &= ~(MIPS_CONF5_UFR | MIPS_CONF5_UFE); | |
| if (cpu_has_mips_r6) { | |
| if (!__builtin_constant_p(cpu_has_mmid) || cpu_has_mmid) | |
| config5 |= MIPS_CONF5_MI; | |
| else | |
| config5 &= ~MIPS_CONF5_MI; | |
| } | |
| write_c0_config5(config5); | |
| if (config5 & MIPS_CONF5_EVA) | |
| c->options |= MIPS_CPU_EVA; | |
| if (config5 & MIPS_CONF5_MRP) | |
| c->options |= MIPS_CPU_MAAR; | |
| if (config5 & MIPS_CONF5_LLB) | |
| c->options |= MIPS_CPU_RW_LLB; | |
| if (config5 & MIPS_CONF5_MVH) | |
| c->options |= MIPS_CPU_MVH; | |
| if (cpu_has_mips_r6 && (config5 & MIPS_CONF5_VP)) | |
| c->options |= MIPS_CPU_VP; | |
| if (config5 & MIPS_CONF5_CA2) | |
| c->ases |= MIPS_ASE_MIPS16E2; | |
| if (config5 & MIPS_CONF5_CRCP) | |
| elf_hwcap |= HWCAP_MIPS_CRC32; | |
| if (cpu_has_mips_r6) { | |
| /* Ensure the write to config5 above takes effect */ | |
| back_to_back_c0_hazard(); | |
| /* Check whether we successfully enabled MMID support */ | |
| config5 = read_c0_config5(); | |
| if (config5 & MIPS_CONF5_MI) | |
| c->options |= MIPS_CPU_MMID; | |
| /* | |
| * Warn if we've hardcoded cpu_has_mmid to a value unsuitable | |
| * for the CPU we're running on, or if CPUs in an SMP system | |
| * have inconsistent MMID support. | |
| */ | |
| WARN_ON(!!cpu_has_mmid != !!(config5 & MIPS_CONF5_MI)); | |
| if (cpu_has_mmid) { | |
| write_c0_memorymapid(~0ul); | |
| back_to_back_c0_hazard(); | |
| asid_mask = read_c0_memorymapid(); | |
| /* | |
| * We maintain a bitmap to track MMID allocation, and | |
| * need a sensible upper bound on the size of that | |
| * bitmap. The initial CPU with MMID support (I6500) | |
| * supports 16 bit MMIDs, which gives us an 8KiB | |
| * bitmap. The architecture recommends that hardware | |
| * support 32 bit MMIDs, which would give us a 512MiB | |
| * bitmap - that's too big in most cases. | |
| * | |
| * Cap MMID width at 16 bits for now & we can revisit | |
| * this if & when hardware supports anything wider. | |
| */ | |
| max_mmid_width = 16; | |
| if (asid_mask > GENMASK(max_mmid_width - 1, 0)) { | |
| pr_info("Capping MMID width at %d bits", | |
| max_mmid_width); | |
| asid_mask = GENMASK(max_mmid_width - 1, 0); | |
| } | |
| set_cpu_asid_mask(c, asid_mask); | |
| } | |
| } | |
| return config5 & MIPS_CONF_M; | |
| } | |
| static void decode_configs(struct cpuinfo_mips *c) | |
| { | |
| int ok; | |
| /* MIPS32 or MIPS64 compliant CPU. */ | |
| c->options = MIPS_CPU_4KEX | MIPS_CPU_4K_CACHE | MIPS_CPU_COUNTER | | |
| MIPS_CPU_DIVEC | MIPS_CPU_LLSC | MIPS_CPU_MCHECK; | |
| c->scache.flags = MIPS_CACHE_NOT_PRESENT; | |
| /* Enable FTLB if present and not disabled */ | |
| set_ftlb_enable(c, mips_ftlb_disabled ? 0 : FTLB_EN); | |
| ok = decode_config0(c); /* Read Config registers. */ | |
| BUG_ON(!ok); /* Arch spec violation! */ | |
| if (ok) | |
| ok = decode_config1(c); | |
| if (ok) | |
| ok = decode_config2(c); | |
| if (ok) | |
| ok = decode_config3(c); | |
| if (ok) | |
| ok = decode_config4(c); | |
| if (ok) | |
| ok = decode_config5(c); | |
| /* Probe the EBase.WG bit */ | |
| if (cpu_has_mips_r2_r6) { | |
| u64 ebase; | |
| unsigned int status; | |
| /* {read,write}_c0_ebase_64() may be UNDEFINED prior to r6 */ | |
| ebase = cpu_has_mips64r6 ? read_c0_ebase_64() | |
| : (s32)read_c0_ebase(); | |
| if (ebase & MIPS_EBASE_WG) { | |
| /* WG bit already set, we can avoid the clumsy probe */ | |
| c->options |= MIPS_CPU_EBASE_WG; | |
| } else { | |
| /* Its UNDEFINED to change EBase while BEV=0 */ | |
| status = read_c0_status(); | |
| write_c0_status(status | ST0_BEV); | |
| irq_enable_hazard(); | |
| /* | |
| * On pre-r6 cores, this may well clobber the upper bits | |
| * of EBase. This is hard to avoid without potentially | |
| * hitting UNDEFINED dm*c0 behaviour if EBase is 32-bit. | |
| */ | |
| if (cpu_has_mips64r6) | |
| write_c0_ebase_64(ebase | MIPS_EBASE_WG); | |
| else | |
| write_c0_ebase(ebase | MIPS_EBASE_WG); | |
| back_to_back_c0_hazard(); | |
| /* Restore BEV */ | |
| write_c0_status(status); | |
| if (read_c0_ebase() & MIPS_EBASE_WG) { | |
| c->options |= MIPS_CPU_EBASE_WG; | |
| write_c0_ebase(ebase); | |
| } | |
| } | |
| } | |
| /* configure the FTLB write probability */ | |
| set_ftlb_enable(c, (mips_ftlb_disabled ? 0 : FTLB_EN) | FTLB_SET_PROB); | |
| mips_probe_watch_registers(c); | |
| #ifndef CONFIG_MIPS_CPS | |
| if (cpu_has_mips_r2_r6) { | |
| unsigned int core; | |
| core = get_ebase_cpunum(); | |
| if (cpu_has_mipsmt) | |
| core >>= fls(core_nvpes()) - 1; | |
| cpu_set_core(c, core); | |
| } | |
| #endif | |
| } | |
| /* | |
| * Probe for certain guest capabilities by writing config bits and reading back. | |
| * Finally write back the original value. | |
| */ | |
| #define probe_gc0_config(name, maxconf, bits) \ | |
| do { \ | |
| unsigned int tmp; \ | |
| tmp = read_gc0_##name(); \ | |
| write_gc0_##name(tmp | (bits)); \ | |
| back_to_back_c0_hazard(); \ | |
| maxconf = read_gc0_##name(); \ | |
| write_gc0_##name(tmp); \ | |
| } while (0) | |
| /* | |
| * Probe for dynamic guest capabilities by changing certain config bits and | |
| * reading back to see if they change. Finally write back the original value. | |
| */ | |
| #define probe_gc0_config_dyn(name, maxconf, dynconf, bits) \ | |
| do { \ | |
| maxconf = read_gc0_##name(); \ | |
| write_gc0_##name(maxconf ^ (bits)); \ | |
| back_to_back_c0_hazard(); \ | |
| dynconf = maxconf ^ read_gc0_##name(); \ | |
| write_gc0_##name(maxconf); \ | |
| maxconf |= dynconf; \ | |
| } while (0) | |
| static inline unsigned int decode_guest_config0(struct cpuinfo_mips *c) | |
| { | |
| unsigned int config0; | |
| probe_gc0_config(config, config0, MIPS_CONF_M); | |
| if (config0 & MIPS_CONF_M) | |
| c->guest.conf |= BIT(1); | |
| return config0 & MIPS_CONF_M; | |
| } | |
| static inline unsigned int decode_guest_config1(struct cpuinfo_mips *c) | |
| { | |
| unsigned int config1, config1_dyn; | |
| probe_gc0_config_dyn(config1, config1, config1_dyn, | |
| MIPS_CONF_M | MIPS_CONF1_PC | MIPS_CONF1_WR | | |
| MIPS_CONF1_FP); | |
| if (config1 & MIPS_CONF1_FP) | |
| c->guest.options |= MIPS_CPU_FPU; | |
| if (config1_dyn & MIPS_CONF1_FP) | |
| c->guest.options_dyn |= MIPS_CPU_FPU; | |
| if (config1 & MIPS_CONF1_WR) | |
| c->guest.options |= MIPS_CPU_WATCH; | |
| if (config1_dyn & MIPS_CONF1_WR) | |
| c->guest.options_dyn |= MIPS_CPU_WATCH; | |
| if (config1 & MIPS_CONF1_PC) | |
| c->guest.options |= MIPS_CPU_PERF; | |
| if (config1_dyn & MIPS_CONF1_PC) | |
| c->guest.options_dyn |= MIPS_CPU_PERF; | |
| if (config1 & MIPS_CONF_M) | |
| c->guest.conf |= BIT(2); | |
| return config1 & MIPS_CONF_M; | |
| } | |
| static inline unsigned int decode_guest_config2(struct cpuinfo_mips *c) | |
| { | |
| unsigned int config2; | |
| probe_gc0_config(config2, config2, MIPS_CONF_M); | |
| if (config2 & MIPS_CONF_M) | |
| c->guest.conf |= BIT(3); | |
| return config2 & MIPS_CONF_M; | |
| } | |
| static inline unsigned int decode_guest_config3(struct cpuinfo_mips *c) | |
| { | |
| unsigned int config3, config3_dyn; | |
| probe_gc0_config_dyn(config3, config3, config3_dyn, | |
| MIPS_CONF_M | MIPS_CONF3_MSA | MIPS_CONF3_ULRI | | |
| MIPS_CONF3_CTXTC); | |
| if (config3 & MIPS_CONF3_CTXTC) | |
| c->guest.options |= MIPS_CPU_CTXTC; | |
| if (config3_dyn & MIPS_CONF3_CTXTC) | |
| c->guest.options_dyn |= MIPS_CPU_CTXTC; | |
| if (config3 & MIPS_CONF3_PW) | |
| c->guest.options |= MIPS_CPU_HTW; | |
| if (config3 & MIPS_CONF3_ULRI) | |
| c->guest.options |= MIPS_CPU_ULRI; | |
| if (config3 & MIPS_CONF3_SC) | |
| c->guest.options |= MIPS_CPU_SEGMENTS; | |
| if (config3 & MIPS_CONF3_BI) | |
| c->guest.options |= MIPS_CPU_BADINSTR; | |
| if (config3 & MIPS_CONF3_BP) | |
| c->guest.options |= MIPS_CPU_BADINSTRP; | |
| if (config3 & MIPS_CONF3_MSA) | |
| c->guest.ases |= MIPS_ASE_MSA; | |
| if (config3_dyn & MIPS_CONF3_MSA) | |
| c->guest.ases_dyn |= MIPS_ASE_MSA; | |
| if (config3 & MIPS_CONF_M) | |
| c->guest.conf |= BIT(4); | |
| return config3 & MIPS_CONF_M; | |
| } | |
| static inline unsigned int decode_guest_config4(struct cpuinfo_mips *c) | |
| { | |
| unsigned int config4; | |
| probe_gc0_config(config4, config4, | |
| MIPS_CONF_M | MIPS_CONF4_KSCREXIST); | |
| c->guest.kscratch_mask = (config4 & MIPS_CONF4_KSCREXIST) | |
| >> MIPS_CONF4_KSCREXIST_SHIFT; | |
| if (config4 & MIPS_CONF_M) | |
| c->guest.conf |= BIT(5); | |
| return config4 & MIPS_CONF_M; | |
| } | |
| static inline unsigned int decode_guest_config5(struct cpuinfo_mips *c) | |
| { | |
| unsigned int config5, config5_dyn; | |
| probe_gc0_config_dyn(config5, config5, config5_dyn, | |
| MIPS_CONF_M | MIPS_CONF5_MVH | MIPS_CONF5_MRP); | |
| if (config5 & MIPS_CONF5_MRP) | |
| c->guest.options |= MIPS_CPU_MAAR; | |
| if (config5_dyn & MIPS_CONF5_MRP) | |
| c->guest.options_dyn |= MIPS_CPU_MAAR; | |
| if (config5 & MIPS_CONF5_LLB) | |
| c->guest.options |= MIPS_CPU_RW_LLB; | |
| if (config5 & MIPS_CONF5_MVH) | |
| c->guest.options |= MIPS_CPU_MVH; | |
| if (config5 & MIPS_CONF_M) | |
| c->guest.conf |= BIT(6); | |
| return config5 & MIPS_CONF_M; | |
| } | |
| static inline void decode_guest_configs(struct cpuinfo_mips *c) | |
| { | |
| unsigned int ok; | |
| ok = decode_guest_config0(c); | |
| if (ok) | |
| ok = decode_guest_config1(c); | |
| if (ok) | |
| ok = decode_guest_config2(c); | |
| if (ok) | |
| ok = decode_guest_config3(c); | |
| if (ok) | |
| ok = decode_guest_config4(c); | |
| if (ok) | |
| decode_guest_config5(c); | |
| } | |
| static inline void cpu_probe_guestctl0(struct cpuinfo_mips *c) | |
| { | |
| unsigned int guestctl0, temp; | |
| guestctl0 = read_c0_guestctl0(); | |
| if (guestctl0 & MIPS_GCTL0_G0E) | |
| c->options |= MIPS_CPU_GUESTCTL0EXT; | |
| if (guestctl0 & MIPS_GCTL0_G1) | |
| c->options |= MIPS_CPU_GUESTCTL1; | |
| if (guestctl0 & MIPS_GCTL0_G2) | |
| c->options |= MIPS_CPU_GUESTCTL2; | |
| if (!(guestctl0 & MIPS_GCTL0_RAD)) { | |
| c->options |= MIPS_CPU_GUESTID; | |
| /* | |
| * Probe for Direct Root to Guest (DRG). Set GuestCtl1.RID = 0 | |
| * first, otherwise all data accesses will be fully virtualised | |
| * as if they were performed by guest mode. | |
| */ | |
| write_c0_guestctl1(0); | |
| tlbw_use_hazard(); | |
| write_c0_guestctl0(guestctl0 | MIPS_GCTL0_DRG); | |
| back_to_back_c0_hazard(); | |
| temp = read_c0_guestctl0(); | |
| if (temp & MIPS_GCTL0_DRG) { | |
| write_c0_guestctl0(guestctl0); | |
| c->options |= MIPS_CPU_DRG; | |
| } | |
| } | |
| } | |
| static inline void cpu_probe_guestctl1(struct cpuinfo_mips *c) | |
| { | |
| if (cpu_has_guestid) { | |
| /* determine the number of bits of GuestID available */ | |
| write_c0_guestctl1(MIPS_GCTL1_ID); | |
| back_to_back_c0_hazard(); | |
| c->guestid_mask = (read_c0_guestctl1() & MIPS_GCTL1_ID) | |
| >> MIPS_GCTL1_ID_SHIFT; | |
| write_c0_guestctl1(0); | |
| } | |
| } | |
| static inline void cpu_probe_gtoffset(struct cpuinfo_mips *c) | |
| { | |
| /* determine the number of bits of GTOffset available */ | |
| write_c0_gtoffset(0xffffffff); | |
| back_to_back_c0_hazard(); | |
| c->gtoffset_mask = read_c0_gtoffset(); | |
| write_c0_gtoffset(0); | |
| } | |
| static inline void cpu_probe_vz(struct cpuinfo_mips *c) | |
| { | |
| cpu_probe_guestctl0(c); | |
| if (cpu_has_guestctl1) | |
| cpu_probe_guestctl1(c); | |
| cpu_probe_gtoffset(c); | |
| decode_guest_configs(c); | |
| } | |
| #define R4K_OPTS (MIPS_CPU_TLB | MIPS_CPU_4KEX | MIPS_CPU_4K_CACHE \ | |
| | MIPS_CPU_COUNTER) | |
| static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu) | |
| { | |
| switch (c->processor_id & PRID_IMP_MASK) { | |
| case PRID_IMP_R2000: | |
| c->cputype = CPU_R2000; | |
| __cpu_name[cpu] = "R2000"; | |
| c->fpu_msk31 |= FPU_CSR_CONDX | FPU_CSR_FS; | |
| c->options = MIPS_CPU_TLB | MIPS_CPU_3K_CACHE | | |
| MIPS_CPU_NOFPUEX; | |
| if (__cpu_has_fpu()) | |
| c->options |= MIPS_CPU_FPU; | |
| c->tlbsize = 64; | |
| break; | |
| case PRID_IMP_R3000: | |
| if ((c->processor_id & PRID_REV_MASK) == PRID_REV_R3000A) { | |
| if (cpu_has_confreg()) { | |
| c->cputype = CPU_R3081E; | |
| __cpu_name[cpu] = "R3081"; | |
| } else { | |
| c->cputype = CPU_R3000A; | |
| __cpu_name[cpu] = "R3000A"; | |
| } | |
| } else { | |
| c->cputype = CPU_R3000; | |
| __cpu_name[cpu] = "R3000"; | |
| } | |
| c->fpu_msk31 |= FPU_CSR_CONDX | FPU_CSR_FS; | |
| c->options = MIPS_CPU_TLB | MIPS_CPU_3K_CACHE | | |
| MIPS_CPU_NOFPUEX; | |
| if (__cpu_has_fpu()) | |
| c->options |= MIPS_CPU_FPU; | |
| c->tlbsize = 64; | |
| break; | |
| case PRID_IMP_R4000: | |
| if (read_c0_config() & CONF_SC) { | |
| if ((c->processor_id & PRID_REV_MASK) >= | |
| PRID_REV_R4400) { | |
| c->cputype = CPU_R4400PC; | |
| __cpu_name[cpu] = "R4400PC"; | |
| } else { | |
| c->cputype = CPU_R4000PC; | |
| __cpu_name[cpu] = "R4000PC"; | |
| } | |
| } else { | |
| int cca = read_c0_config() & CONF_CM_CMASK; | |
| int mc; | |
| /* | |
| * SC and MC versions can't be reliably told apart, | |
| * but only the latter support coherent caching | |
| * modes so assume the firmware has set the KSEG0 | |
| * coherency attribute reasonably (if uncached, we | |
| * assume SC). | |
| */ | |
| switch (cca) { | |
| case CONF_CM_CACHABLE_CE: | |
| case CONF_CM_CACHABLE_COW: | |
| case CONF_CM_CACHABLE_CUW: | |
| mc = 1; | |
| break; | |
| default: | |
| mc = 0; | |
| break; | |
| } | |
| if ((c->processor_id & PRID_REV_MASK) >= | |
| PRID_REV_R4400) { | |
| c->cputype = mc ? CPU_R4400MC : CPU_R4400SC; | |
| __cpu_name[cpu] = mc ? "R4400MC" : "R4400SC"; | |
| } else { | |
| c->cputype = mc ? CPU_R4000MC : CPU_R4000SC; | |
| __cpu_name[cpu] = mc ? "R4000MC" : "R4000SC"; | |
| } | |
| } | |
| set_isa(c, MIPS_CPU_ISA_III); | |
| c->fpu_msk31 |= FPU_CSR_CONDX; | |
| c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR | | |
| MIPS_CPU_WATCH | MIPS_CPU_VCE | | |
| MIPS_CPU_LLSC; | |
| c->tlbsize = 48; | |
| break; | |
| case PRID_IMP_VR41XX: | |
| set_isa(c, MIPS_CPU_ISA_III); | |
| c->fpu_msk31 |= FPU_CSR_CONDX; | |
| c->options = R4K_OPTS; | |
| c->tlbsize = 32; | |
| switch (c->processor_id & 0xf0) { | |
| case PRID_REV_VR4111: | |
| c->cputype = CPU_VR4111; | |
| __cpu_name[cpu] = "NEC VR4111"; | |
| break; | |
| case PRID_REV_VR4121: | |
| c->cputype = CPU_VR4121; | |
| __cpu_name[cpu] = "NEC VR4121"; | |
| break; | |
| case PRID_REV_VR4122: | |
| if ((c->processor_id & 0xf) < 0x3) { | |
| c->cputype = CPU_VR4122; | |
| __cpu_name[cpu] = "NEC VR4122"; | |
| } else { | |
| c->cputype = CPU_VR4181A; | |
| __cpu_name[cpu] = "NEC VR4181A"; | |
| } | |
| break; | |
| case PRID_REV_VR4130: | |
| if ((c->processor_id & 0xf) < 0x4) { | |
| c->cputype = CPU_VR4131; | |
| __cpu_name[cpu] = "NEC VR4131"; | |
| } else { | |
| c->cputype = CPU_VR4133; | |
| c->options |= MIPS_CPU_LLSC; | |
| __cpu_name[cpu] = "NEC VR4133"; | |
| } | |
| break; | |
| default: | |
| printk(KERN_INFO "Unexpected CPU of NEC VR4100 series\n"); | |
| c->cputype = CPU_VR41XX; | |
| __cpu_name[cpu] = "NEC Vr41xx"; | |
| break; | |
| } | |
| break; | |
| case PRID_IMP_R4600: | |
| c->cputype = CPU_R4600; | |
| __cpu_name[cpu] = "R4600"; | |
| set_isa(c, MIPS_CPU_ISA_III); | |
| c->fpu_msk31 |= FPU_CSR_CONDX; | |
| c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR | | |
| MIPS_CPU_LLSC; | |
| c->tlbsize = 48; | |
| break; | |
| #if 0 | |
| case PRID_IMP_R4650: | |
| /* | |
| * This processor doesn't have an MMU, so it's not | |
| * "real easy" to run Linux on it. It is left purely | |
| * for documentation. Commented out because it shares | |
| * it's c0_prid id number with the TX3900. | |
| */ | |
| c->cputype = CPU_R4650; | |
| __cpu_name[cpu] = "R4650"; | |
| set_isa(c, MIPS_CPU_ISA_III); | |
| c->fpu_msk31 |= FPU_CSR_CONDX; | |
| c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_LLSC; | |
| c->tlbsize = 48; | |
| break; | |
| #endif | |
| case PRID_IMP_TX39: | |
| c->fpu_msk31 |= FPU_CSR_CONDX | FPU_CSR_FS; | |
| c->options = MIPS_CPU_TLB | MIPS_CPU_TX39_CACHE; | |
| if ((c->processor_id & 0xf0) == (PRID_REV_TX3927 & 0xf0)) { | |
| c->cputype = CPU_TX3927; | |
| __cpu_name[cpu] = "TX3927"; | |
| c->tlbsize = 64; | |
| } else { | |
| switch (c->processor_id & PRID_REV_MASK) { | |
| case PRID_REV_TX3912: | |
| c->cputype = CPU_TX3912; | |
| __cpu_name[cpu] = "TX3912"; | |
| c->tlbsize = 32; | |
| break; | |
| case PRID_REV_TX3922: | |
| c->cputype = CPU_TX3922; | |
| __cpu_name[cpu] = "TX3922"; | |
| c->tlbsize = 64; | |
| break; | |
| } | |
| } | |
| break; | |
| case PRID_IMP_R4700: | |
| c->cputype = CPU_R4700; | |
| __cpu_name[cpu] = "R4700"; | |
| set_isa(c, MIPS_CPU_ISA_III); | |
| c->fpu_msk31 |= FPU_CSR_CONDX; | |
| c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR | | |
| MIPS_CPU_LLSC; | |
| c->tlbsize = 48; | |
| break; | |
| case PRID_IMP_TX49: | |
| c->cputype = CPU_TX49XX; | |
| __cpu_name[cpu] = "R49XX"; | |
| set_isa(c, MIPS_CPU_ISA_III); | |
| c->fpu_msk31 |= FPU_CSR_CONDX; | |
| c->options = R4K_OPTS | MIPS_CPU_LLSC; | |
| if (!(c->processor_id & 0x08)) | |
| c->options |= MIPS_CPU_FPU | MIPS_CPU_32FPR; | |
| c->tlbsize = 48; | |
| break; | |
| case PRID_IMP_R5000: | |
| c->cputype = CPU_R5000; | |
| __cpu_name[cpu] = "R5000"; | |
| set_isa(c, MIPS_CPU_ISA_IV); | |
| c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR | | |
| MIPS_CPU_LLSC; | |
| c->tlbsize = 48; | |
| break; | |
| case PRID_IMP_R5500: | |
| c->cputype = CPU_R5500; | |
| __cpu_name[cpu] = "R5500"; | |
| set_isa(c, MIPS_CPU_ISA_IV); | |
| c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR | | |
| MIPS_CPU_WATCH | MIPS_CPU_LLSC; | |
| c->tlbsize = 48; | |
| break; | |
| case PRID_IMP_NEVADA: | |
| c->cputype = CPU_NEVADA; | |
| __cpu_name[cpu] = "Nevada"; | |
| set_isa(c, MIPS_CPU_ISA_IV); | |
| c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR | | |
| MIPS_CPU_DIVEC | MIPS_CPU_LLSC; | |
| c->tlbsize = 48; | |
| break; | |
| case PRID_IMP_RM7000: | |
| c->cputype = CPU_RM7000; | |
| __cpu_name[cpu] = "RM7000"; | |
| set_isa(c, MIPS_CPU_ISA_IV); | |
| c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR | | |
| MIPS_CPU_LLSC; | |
| /* | |
| * Undocumented RM7000: Bit 29 in the info register of | |
| * the RM7000 v2.0 indicates if the TLB has 48 or 64 | |
| * entries. | |
| * | |
| * 29 1 => 64 entry JTLB | |
| * 0 => 48 entry JTLB | |
| */ | |
| c->tlbsize = (read_c0_info() & (1 << 29)) ? 64 : 48; | |
| break; | |
| case PRID_IMP_R10000: | |
| c->cputype = CPU_R10000; | |
| __cpu_name[cpu] = "R10000"; | |
| set_isa(c, MIPS_CPU_ISA_IV); | |
| c->options = MIPS_CPU_TLB | MIPS_CPU_4K_CACHE | MIPS_CPU_4KEX | | |
| MIPS_CPU_FPU | MIPS_CPU_32FPR | | |
| MIPS_CPU_COUNTER | MIPS_CPU_WATCH | | |
| MIPS_CPU_LLSC; | |
| c->tlbsize = 64; | |
| break; | |
| case PRID_IMP_R12000: | |
| c->cputype = CPU_R12000; | |
| __cpu_name[cpu] = "R12000"; | |
| set_isa(c, MIPS_CPU_ISA_IV); | |
| c->options = MIPS_CPU_TLB | MIPS_CPU_4K_CACHE | MIPS_CPU_4KEX | | |
| MIPS_CPU_FPU | MIPS_CPU_32FPR | | |
| MIPS_CPU_COUNTER | MIPS_CPU_WATCH | | |
| MIPS_CPU_LLSC; | |
| c->tlbsize = 64; | |
| write_c0_r10k_diag(read_c0_r10k_diag() | R10K_DIAG_E_GHIST); | |
| break; | |
| case PRID_IMP_R14000: | |
| if (((c->processor_id >> 4) & 0x0f) > 2) { | |
| c->cputype = CPU_R16000; | |
| __cpu_name[cpu] = "R16000"; | |
| } else { | |
| c->cputype = CPU_R14000; | |
| __cpu_name[cpu] = "R14000"; | |
| } | |
| set_isa(c, MIPS_CPU_ISA_IV); | |
| c->options = MIPS_CPU_TLB | MIPS_CPU_4K_CACHE | MIPS_CPU_4KEX | | |
| MIPS_CPU_FPU | MIPS_CPU_32FPR | | |
| MIPS_CPU_COUNTER | MIPS_CPU_WATCH | | |
| MIPS_CPU_LLSC; | |
| c->tlbsize = 64; | |
| write_c0_r10k_diag(read_c0_r10k_diag() | R10K_DIAG_E_GHIST); | |
| break; | |
| case PRID_IMP_LOONGSON_64C: /* Loongson-2/3 */ | |
| switch (c->processor_id & PRID_REV_MASK) { | |
| case PRID_REV_LOONGSON2E: | |
| c->cputype = CPU_LOONGSON2EF; | |
| __cpu_name[cpu] = "ICT Loongson-2"; | |
| set_elf_platform(cpu, "loongson2e"); | |
| set_isa(c, MIPS_CPU_ISA_III); | |
| c->fpu_msk31 |= FPU_CSR_CONDX; | |
| break; | |
| case PRID_REV_LOONGSON2F: | |
| c->cputype = CPU_LOONGSON2EF; | |
| __cpu_name[cpu] = "ICT Loongson-2"; | |
| set_elf_platform(cpu, "loongson2f"); | |
| set_isa(c, MIPS_CPU_ISA_III); | |
| c->fpu_msk31 |= FPU_CSR_CONDX; | |
| break; | |
| case PRID_REV_LOONGSON3A_R1: | |
| c->cputype = CPU_LOONGSON64; | |
| __cpu_name[cpu] = "ICT Loongson-3"; | |
| set_elf_platform(cpu, "loongson3a"); | |
| set_isa(c, MIPS_CPU_ISA_M64R1); | |
| c->ases |= (MIPS_ASE_LOONGSON_MMI | MIPS_ASE_LOONGSON_CAM | | |
| MIPS_ASE_LOONGSON_EXT); | |
| break; | |
| case PRID_REV_LOONGSON3B_R1: | |
| case PRID_REV_LOONGSON3B_R2: | |
| c->cputype = CPU_LOONGSON64; | |
| __cpu_name[cpu] = "ICT Loongson-3"; | |
| set_elf_platform(cpu, "loongson3b"); | |
| set_isa(c, MIPS_CPU_ISA_M64R1); | |
| c->ases |= (MIPS_ASE_LOONGSON_MMI | MIPS_ASE_LOONGSON_CAM | | |
| MIPS_ASE_LOONGSON_EXT); | |
| break; | |
| } | |
| c->options = R4K_OPTS | | |
| MIPS_CPU_FPU | MIPS_CPU_LLSC | | |
| MIPS_CPU_32FPR; | |
| c->tlbsize = 64; | |
| set_cpu_asid_mask(c, MIPS_ENTRYHI_ASID); | |
| c->writecombine = _CACHE_UNCACHED_ACCELERATED; | |
| break; | |
| case PRID_IMP_LOONGSON_32: /* Loongson-1 */ | |
| decode_configs(c); | |
| c->cputype = CPU_LOONGSON32; | |
| switch (c->processor_id & PRID_REV_MASK) { | |
| case PRID_REV_LOONGSON1B: | |
| __cpu_name[cpu] = "Loongson 1B"; | |
| break; | |
| } | |
| break; | |
| } | |
| } | |
| static inline void cpu_probe_mips(struct cpuinfo_mips *c, unsigned int cpu) | |
| { | |
| c->writecombine = _CACHE_UNCACHED_ACCELERATED; | |
| switch (c->processor_id & PRID_IMP_MASK) { | |
| case PRID_IMP_QEMU_GENERIC: | |
| c->writecombine = _CACHE_UNCACHED; | |
| c->cputype = CPU_QEMU_GENERIC; | |
| __cpu_name[cpu] = "MIPS GENERIC QEMU"; | |
| break; | |
| case PRID_IMP_4KC: | |
| c->cputype = CPU_4KC; | |
| c->writecombine = _CACHE_UNCACHED; | |
| __cpu_name[cpu] = "MIPS 4Kc"; | |
| break; | |
| case PRID_IMP_4KEC: | |
| case PRID_IMP_4KECR2: | |
| c->cputype = CPU_4KEC; | |
| c->writecombine = _CACHE_UNCACHED; | |
| __cpu_name[cpu] = "MIPS 4KEc"; | |
| break; | |
| case PRID_IMP_4KSC: | |
| case PRID_IMP_4KSD: | |
| c->cputype = CPU_4KSC; | |
| c->writecombine = _CACHE_UNCACHED; | |
| __cpu_name[cpu] = "MIPS 4KSc"; | |
| break; | |
| case PRID_IMP_5KC: | |
| c->cputype = CPU_5KC; | |
| c->writecombine = _CACHE_UNCACHED; | |
| __cpu_name[cpu] = "MIPS 5Kc"; | |
| break; | |
| case PRID_IMP_5KE: | |
| c->cputype = CPU_5KE; | |
| c->writecombine = _CACHE_UNCACHED; | |
| __cpu_name[cpu] = "MIPS 5KE"; | |
| break; | |
| case PRID_IMP_20KC: | |
| c->cputype = CPU_20KC; | |
| c->writecombine = _CACHE_UNCACHED; | |
| __cpu_name[cpu] = "MIPS 20Kc"; | |
| break; | |
| case PRID_IMP_24K: | |
| c->cputype = CPU_24K; | |
| c->writecombine = _CACHE_UNCACHED; | |
| __cpu_name[cpu] = "MIPS 24Kc"; | |
| break; | |
| case PRID_IMP_24KE: | |
| c->cputype = CPU_24K; | |
| c->writecombine = _CACHE_UNCACHED; | |
| __cpu_name[cpu] = "MIPS 24KEc"; | |
| break; | |
| case PRID_IMP_25KF: | |
| c->cputype = CPU_25KF; | |
| c->writecombine = _CACHE_UNCACHED; | |
| __cpu_name[cpu] = "MIPS 25Kc"; | |
| break; | |
| case PRID_IMP_34K: | |
| c->cputype = CPU_34K; | |
| c->writecombine = _CACHE_UNCACHED; | |
| __cpu_name[cpu] = "MIPS 34Kc"; | |
| cpu_set_mt_per_tc_perf(c); | |
| break; | |
| case PRID_IMP_74K: | |
| c->cputype = CPU_74K; | |
| c->writecombine = _CACHE_UNCACHED; | |
| __cpu_name[cpu] = "MIPS 74Kc"; | |
| break; | |
| case PRID_IMP_M14KC: | |
| c->cputype = CPU_M14KC; | |
| c->writecombine = _CACHE_UNCACHED; | |
| __cpu_name[cpu] = "MIPS M14Kc"; | |
| break; | |
| case PRID_IMP_M14KEC: | |
| c->cputype = CPU_M14KEC; | |
| c->writecombine = _CACHE_UNCACHED; | |
| __cpu_name[cpu] = "MIPS M14KEc"; | |
| break; | |
| case PRID_IMP_1004K: | |
| c->cputype = CPU_1004K; | |
| c->writecombine = _CACHE_UNCACHED; | |
| __cpu_name[cpu] = "MIPS 1004Kc"; | |
| cpu_set_mt_per_tc_perf(c); | |
| break; | |
| case PRID_IMP_1074K: | |
| c->cputype = CPU_1074K; | |
| c->writecombine = _CACHE_UNCACHED; | |
| __cpu_name[cpu] = "MIPS 1074Kc"; | |
| break; | |
| case PRID_IMP_INTERAPTIV_UP: | |
| c->cputype = CPU_INTERAPTIV; | |
| __cpu_name[cpu] = "MIPS interAptiv"; | |
| cpu_set_mt_per_tc_perf(c); | |
| break; | |
| case PRID_IMP_INTERAPTIV_MP: | |
| c->cputype = CPU_INTERAPTIV; | |
| __cpu_name[cpu] = "MIPS interAptiv (multi)"; | |
| cpu_set_mt_per_tc_perf(c); | |
| break; | |
| case PRID_IMP_PROAPTIV_UP: | |
| c->cputype = CPU_PROAPTIV; | |
| __cpu_name[cpu] = "MIPS proAptiv"; | |
| break; | |
| case PRID_IMP_PROAPTIV_MP: | |
| c->cputype = CPU_PROAPTIV; | |
| __cpu_name[cpu] = "MIPS proAptiv (multi)"; | |
| break; | |
| case PRID_IMP_P5600: | |
| c->cputype = CPU_P5600; | |
| __cpu_name[cpu] = "MIPS P5600"; | |
| break; | |
| case PRID_IMP_P6600: | |
| c->cputype = CPU_P6600; | |
| __cpu_name[cpu] = "MIPS P6600"; | |
| break; | |
| case PRID_IMP_I6400: | |
| c->cputype = CPU_I6400; | |
| __cpu_name[cpu] = "MIPS I6400"; | |
| break; | |
| case PRID_IMP_I6500: | |
| c->cputype = CPU_I6500; | |
| __cpu_name[cpu] = "MIPS I6500"; | |
| break; | |
| case PRID_IMP_M5150: | |
| c->cputype = CPU_M5150; | |
| __cpu_name[cpu] = "MIPS M5150"; | |
| break; | |
| case PRID_IMP_M6250: | |
| c->cputype = CPU_M6250; | |
| __cpu_name[cpu] = "MIPS M6250"; | |
| break; | |
| } | |
| decode_configs(c); | |
| spram_config(); | |
| mm_config(c); | |
| switch (__get_cpu_type(c->cputype)) { | |
| case CPU_M5150: | |
| case CPU_P5600: | |
| set_isa(c, MIPS_CPU_ISA_M32R5); | |
| break; | |
| case CPU_I6500: | |
| c->options |= MIPS_CPU_SHARED_FTLB_ENTRIES; | |
| fallthrough; | |
| case CPU_I6400: | |
| c->options |= MIPS_CPU_SHARED_FTLB_RAM; | |
| fallthrough; | |
| default: | |
| break; | |
| } | |
| /* Recent MIPS cores use the implementation-dependent ExcCode 16 for | |
| * cache/FTLB parity exceptions. | |
| */ | |
| switch (__get_cpu_type(c->cputype)) { | |
| case CPU_PROAPTIV: | |
| case CPU_P5600: | |
| case CPU_P6600: | |
| case CPU_I6400: | |
| case CPU_I6500: | |
| c->options |= MIPS_CPU_FTLBPAREX; | |
| break; | |
| } | |
| } | |
| static inline void cpu_probe_alchemy(struct cpuinfo_mips *c, unsigned int cpu) | |
| { | |
| decode_configs(c); | |
| switch (c->processor_id & PRID_IMP_MASK) { | |
| case PRID_IMP_AU1_REV1: | |
| case PRID_IMP_AU1_REV2: | |
| c->cputype = CPU_ALCHEMY; | |
| switch ((c->processor_id >> 24) & 0xff) { | |
| case 0: | |
| __cpu_name[cpu] = "Au1000"; | |
| break; | |
| case 1: | |
| __cpu_name[cpu] = "Au1500"; | |
| break; | |
| case 2: | |
| __cpu_name[cpu] = "Au1100"; | |
| break; | |
| case 3: | |
| __cpu_name[cpu] = "Au1550"; | |
| break; | |
| case 4: | |
| __cpu_name[cpu] = "Au1200"; | |
| if ((c->processor_id & PRID_REV_MASK) == 2) | |
| __cpu_name[cpu] = "Au1250"; | |
| break; | |
| case 5: | |
| __cpu_name[cpu] = "Au1210"; | |
| break; | |
| default: | |
| __cpu_name[cpu] = "Au1xxx"; | |
| break; | |
| } | |
| break; | |
| } | |
| } | |
| static inline void cpu_probe_sibyte(struct cpuinfo_mips *c, unsigned int cpu) | |
| { | |
| decode_configs(c); | |
| c->writecombine = _CACHE_UNCACHED_ACCELERATED; | |
| switch (c->processor_id & PRID_IMP_MASK) { | |
| case PRID_IMP_SB1: | |
| c->cputype = CPU_SB1; | |
| __cpu_name[cpu] = "SiByte SB1"; | |
| /* FPU in pass1 is known to have issues. */ | |
| if ((c->processor_id & PRID_REV_MASK) < 0x02) | |
| c->options &= ~(MIPS_CPU_FPU | MIPS_CPU_32FPR); | |
| break; | |
| case PRID_IMP_SB1A: | |
| c->cputype = CPU_SB1A; | |
| __cpu_name[cpu] = "SiByte SB1A"; | |
| break; | |
| } | |
| } | |
| static inline void cpu_probe_sandcraft(struct cpuinfo_mips *c, unsigned int cpu) | |
| { | |
| decode_configs(c); | |
| switch (c->processor_id & PRID_IMP_MASK) { | |
| case PRID_IMP_SR71000: | |
| c->cputype = CPU_SR71000; | |
| __cpu_name[cpu] = "Sandcraft SR71000"; | |
| c->scache.ways = 8; | |
| c->tlbsize = 64; | |
| break; | |
| } | |
| } | |
| static inline void cpu_probe_nxp(struct cpuinfo_mips *c, unsigned int cpu) | |
| { | |
| decode_configs(c); | |
| switch (c->processor_id & PRID_IMP_MASK) { | |
| case PRID_IMP_PR4450: | |
| c->cputype = CPU_PR4450; | |
| __cpu_name[cpu] = "Philips PR4450"; | |
| set_isa(c, MIPS_CPU_ISA_M32R1); | |
| break; | |
| } | |
| } | |
| static inline void cpu_probe_broadcom(struct cpuinfo_mips *c, unsigned int cpu) | |
| { | |
| decode_configs(c); | |
| switch (c->processor_id & PRID_IMP_MASK) { | |
| case PRID_IMP_BMIPS32_REV4: | |
| case PRID_IMP_BMIPS32_REV8: | |
| c->cputype = CPU_BMIPS32; | |
| __cpu_name[cpu] = "Broadcom BMIPS32"; | |
| set_elf_platform(cpu, "bmips32"); | |
| break; | |
| case PRID_IMP_BMIPS3300: | |
| case PRID_IMP_BMIPS3300_ALT: | |
| case PRID_IMP_BMIPS3300_BUG: | |
| c->cputype = CPU_BMIPS3300; | |
| __cpu_name[cpu] = "Broadcom BMIPS3300"; | |
| set_elf_platform(cpu, "bmips3300"); | |
| break; | |
| case PRID_IMP_BMIPS43XX: { | |
| int rev = c->processor_id & PRID_REV_MASK; | |
| if (rev >= PRID_REV_BMIPS4380_LO && | |
| rev <= PRID_REV_BMIPS4380_HI) { | |
| c->cputype = CPU_BMIPS4380; | |
| __cpu_name[cpu] = "Broadcom BMIPS4380"; | |
| set_elf_platform(cpu, "bmips4380"); | |
| c->options |= MIPS_CPU_RIXI; | |
| } else { | |
| c->cputype = CPU_BMIPS4350; | |
| __cpu_name[cpu] = "Broadcom BMIPS4350"; | |
| set_elf_platform(cpu, "bmips4350"); | |
| } | |
| break; | |
| } | |
| case PRID_IMP_BMIPS5000: | |
| case PRID_IMP_BMIPS5200: | |
| c->cputype = CPU_BMIPS5000; | |
| if ((c->processor_id & PRID_IMP_MASK) == PRID_IMP_BMIPS5200) | |
| __cpu_name[cpu] = "Broadcom BMIPS5200"; | |
| else | |
| __cpu_name[cpu] = "Broadcom BMIPS5000"; | |
| set_elf_platform(cpu, "bmips5000"); | |
| c->options |= MIPS_CPU_ULRI | MIPS_CPU_RIXI; | |
| break; | |
| } | |
| } | |
| static inline void cpu_probe_cavium(struct cpuinfo_mips *c, unsigned int cpu) | |
| { | |
| decode_configs(c); | |
| switch (c->processor_id & PRID_IMP_MASK) { | |
| case PRID_IMP_CAVIUM_CN38XX: | |
| case PRID_IMP_CAVIUM_CN31XX: | |
| case PRID_IMP_CAVIUM_CN30XX: | |
| c->cputype = CPU_CAVIUM_OCTEON; | |
| __cpu_name[cpu] = "Cavium Octeon"; | |
| goto platform; | |
| case PRID_IMP_CAVIUM_CN58XX: | |
| case PRID_IMP_CAVIUM_CN56XX: | |
| case PRID_IMP_CAVIUM_CN50XX: | |
| case PRID_IMP_CAVIUM_CN52XX: | |
| c->cputype = CPU_CAVIUM_OCTEON_PLUS; | |
| __cpu_name[cpu] = "Cavium Octeon+"; | |
| platform: | |
| set_elf_platform(cpu, "octeon"); | |
| break; | |
| case PRID_IMP_CAVIUM_CN61XX: | |
| case PRID_IMP_CAVIUM_CN63XX: | |
| case PRID_IMP_CAVIUM_CN66XX: | |
| case PRID_IMP_CAVIUM_CN68XX: | |
| case PRID_IMP_CAVIUM_CNF71XX: | |
| c->cputype = CPU_CAVIUM_OCTEON2; | |
| __cpu_name[cpu] = "Cavium Octeon II"; | |
| set_elf_platform(cpu, "octeon2"); | |
| break; | |
| case PRID_IMP_CAVIUM_CN70XX: | |
| case PRID_IMP_CAVIUM_CN73XX: | |
| case PRID_IMP_CAVIUM_CNF75XX: | |
| case PRID_IMP_CAVIUM_CN78XX: | |
| c->cputype = CPU_CAVIUM_OCTEON3; | |
| __cpu_name[cpu] = "Cavium Octeon III"; | |
| set_elf_platform(cpu, "octeon3"); | |
| break; | |
| default: | |
| printk(KERN_INFO "Unknown Octeon chip!\n"); | |
| c->cputype = CPU_UNKNOWN; | |
| break; | |
| } | |
| } | |
| #ifdef CONFIG_CPU_LOONGSON64 | |
| #include <loongson_regs.h> | |
| static inline void decode_cpucfg(struct cpuinfo_mips *c) | |
| { | |
| u32 cfg1 = read_cpucfg(LOONGSON_CFG1); | |
| u32 cfg2 = read_cpucfg(LOONGSON_CFG2); | |
| u32 cfg3 = read_cpucfg(LOONGSON_CFG3); | |
| if (cfg1 & LOONGSON_CFG1_MMI) | |
| c->ases |= MIPS_ASE_LOONGSON_MMI; | |
| if (cfg2 & LOONGSON_CFG2_LEXT1) | |
| c->ases |= MIPS_ASE_LOONGSON_EXT; | |
| if (cfg2 & LOONGSON_CFG2_LEXT2) | |
| c->ases |= MIPS_ASE_LOONGSON_EXT2; | |
| if (cfg2 & LOONGSON_CFG2_LSPW) { | |
| c->options |= MIPS_CPU_LDPTE; | |
| c->guest.options |= MIPS_CPU_LDPTE; | |
| } | |
| if (cfg3 & LOONGSON_CFG3_LCAMP) | |
| c->ases |= MIPS_ASE_LOONGSON_CAM; | |
| } | |
| static inline void cpu_probe_loongson(struct cpuinfo_mips *c, unsigned int cpu) | |
| { | |
| decode_configs(c); | |
| /* All Loongson processors covered here define ExcCode 16 as GSExc. */ | |
| c->options |= MIPS_CPU_GSEXCEX; | |
| switch (c->processor_id & PRID_IMP_MASK) { | |
| case PRID_IMP_LOONGSON_64R: /* Loongson-64 Reduced */ | |
| switch (c->processor_id & PRID_REV_MASK) { | |
| case PRID_REV_LOONGSON2K_R1_0: | |
| case PRID_REV_LOONGSON2K_R1_1: | |
| case PRID_REV_LOONGSON2K_R1_2: | |
| case PRID_REV_LOONGSON2K_R1_3: | |
| c->cputype = CPU_LOONGSON64; | |
| __cpu_name[cpu] = "Loongson-2K"; | |
| set_elf_platform(cpu, "gs264e"); | |
| set_isa(c, MIPS_CPU_ISA_M64R2); | |
| break; | |
| } | |
| c->writecombine = _CACHE_UNCACHED_ACCELERATED; | |
| c->ases |= (MIPS_ASE_LOONGSON_MMI | MIPS_ASE_LOONGSON_EXT | | |
| MIPS_ASE_LOONGSON_EXT2); | |
| break; | |
| case PRID_IMP_LOONGSON_64C: /* Loongson-3 Classic */ | |
| switch (c->processor_id & PRID_REV_MASK) { | |
| case PRID_REV_LOONGSON3A_R2_0: | |
| case PRID_REV_LOONGSON3A_R2_1: | |
| c->cputype = CPU_LOONGSON64; | |
| __cpu_name[cpu] = "ICT Loongson-3"; | |
| set_elf_platform(cpu, "loongson3a"); | |
| set_isa(c, MIPS_CPU_ISA_M64R2); | |
| break; | |
| case PRID_REV_LOONGSON3A_R3_0: | |
| case PRID_REV_LOONGSON3A_R3_1: | |
| c->cputype = CPU_LOONGSON64; | |
| __cpu_name[cpu] = "ICT Loongson-3"; | |
| set_elf_platform(cpu, "loongson3a"); | |
| set_isa(c, MIPS_CPU_ISA_M64R2); | |
| break; | |
| } | |
| /* | |
| * Loongson-3 Classic did not implement MIPS standard TLBINV | |
| * but implemented TLBINVF and EHINV. As currently we're only | |
| * using these two features, enable MIPS_CPU_TLBINV as well. | |
| * | |
| * Also some early Loongson-3A2000 had wrong TLB type in Config | |
| * register, we correct it here. | |
| */ | |
| c->options |= MIPS_CPU_FTLB | MIPS_CPU_TLBINV | MIPS_CPU_LDPTE; | |
| c->writecombine = _CACHE_UNCACHED_ACCELERATED; | |
| c->ases |= (MIPS_ASE_LOONGSON_MMI | MIPS_ASE_LOONGSON_CAM | | |
| MIPS_ASE_LOONGSON_EXT | MIPS_ASE_LOONGSON_EXT2); | |
| c->ases &= ~MIPS_ASE_VZ; /* VZ of Loongson-3A2000/3000 is incomplete */ | |
| break; | |
| case PRID_IMP_LOONGSON_64G: | |
| c->cputype = CPU_LOONGSON64; | |
| __cpu_name[cpu] = "ICT Loongson-3"; | |
| set_elf_platform(cpu, "loongson3a"); | |
| set_isa(c, MIPS_CPU_ISA_M64R2); | |
| decode_cpucfg(c); | |
| c->writecombine = _CACHE_UNCACHED_ACCELERATED; | |
| break; | |
| default: | |
| panic("Unknown Loongson Processor ID!"); | |
| break; | |
| } | |
| } | |
| #else | |
| static inline void cpu_probe_loongson(struct cpuinfo_mips *c, unsigned int cpu) { } | |
| #endif | |
| static inline void cpu_probe_ingenic(struct cpuinfo_mips *c, unsigned int cpu) | |
| { | |
| decode_configs(c); | |
| /* | |
| * XBurst misses a config2 register, so config3 decode was skipped in | |
| * decode_configs(). | |
| */ | |
| decode_config3(c); | |
| /* XBurst does not implement the CP0 counter. */ | |
| c->options &= ~MIPS_CPU_COUNTER; | |
| BUG_ON(__builtin_constant_p(cpu_has_counter) && cpu_has_counter); | |
| /* XBurst has virtually tagged icache */ | |
| c->icache.flags |= MIPS_CACHE_VTAG; | |
| switch (c->processor_id & PRID_IMP_MASK) { | |
| /* XBurst®1 with MXU1.0/MXU1.1 SIMD ISA */ | |
| case PRID_IMP_XBURST_REV1: | |
| /* | |
| * The XBurst core by default attempts to avoid branch target | |
| * buffer lookups by detecting & special casing loops. This | |
| * feature will cause BogoMIPS and lpj calculate in error. | |
| * Set cp0 config7 bit 4 to disable this feature. | |
| */ | |
| set_c0_config7(MIPS_CONF7_BTB_LOOP_EN); | |
| switch (c->processor_id & PRID_COMP_MASK) { | |
| /* | |
| * The config0 register in the XBurst CPUs with a processor ID of | |
| * PRID_COMP_INGENIC_D0 report themselves as MIPS32r2 compatible, | |
| * but they don't actually support this ISA. | |
| */ | |
| case PRID_COMP_INGENIC_D0: | |
| c->isa_level &= ~MIPS_CPU_ISA_M32R2; | |
| break; | |
| /* | |
| * The config0 register in the XBurst CPUs with a processor ID of | |
| * PRID_COMP_INGENIC_D1 has an abandoned huge page tlb mode, this | |
| * mode is not compatible with the MIPS standard, it will cause | |
| * tlbmiss and into an infinite loop (line 21 in the tlb-funcs.S) | |
| * when starting the init process. After chip reset, the default | |
| * is HPTLB mode, Write 0xa9000000 to cp0 register 5 sel 4 to | |
| * switch back to VTLB mode to prevent getting stuck. | |
| */ | |
| case PRID_COMP_INGENIC_D1: | |
| write_c0_page_ctrl(XBURST_PAGECTRL_HPTLB_DIS); | |
| break; | |
| default: | |
| break; | |
| } | |
| fallthrough; | |
| /* XBurst®1 with MXU2.0 SIMD ISA */ | |
| case PRID_IMP_XBURST_REV2: | |
| /* Ingenic uses the WA bit to achieve write-combine memory writes */ | |
| c->writecombine = _CACHE_CACHABLE_WA; | |
| c->cputype = CPU_XBURST; | |
| __cpu_name[cpu] = "Ingenic XBurst"; | |
| break; | |
| /* XBurst®2 with MXU2.1 SIMD ISA */ | |
| case PRID_IMP_XBURST2: | |
| c->cputype = CPU_XBURST; | |
| __cpu_name[cpu] = "Ingenic XBurst II"; | |
| break; | |
| default: | |
| panic("Unknown Ingenic Processor ID!"); | |
| break; | |
| } | |
| } | |
| static inline void cpu_probe_netlogic(struct cpuinfo_mips *c, int cpu) | |
| { | |
| decode_configs(c); | |
| if ((c->processor_id & PRID_IMP_MASK) == PRID_IMP_NETLOGIC_AU13XX) { | |
| c->cputype = CPU_ALCHEMY; | |
| __cpu_name[cpu] = "Au1300"; | |
| /* following stuff is not for Alchemy */ | |
| return; | |
| } | |
| c->options = (MIPS_CPU_TLB | | |
| MIPS_CPU_4KEX | | |
| MIPS_CPU_COUNTER | | |
| MIPS_CPU_DIVEC | | |
| MIPS_CPU_WATCH | | |
| MIPS_CPU_EJTAG | | |
| MIPS_CPU_LLSC); | |
| switch (c->processor_id & PRID_IMP_MASK) { | |
| case PRID_IMP_NETLOGIC_XLP2XX: | |
| case PRID_IMP_NETLOGIC_XLP9XX: | |
| case PRID_IMP_NETLOGIC_XLP5XX: | |
| c->cputype = CPU_XLP; | |
| __cpu_name[cpu] = "Broadcom XLPII"; | |
| break; | |
| case PRID_IMP_NETLOGIC_XLP8XX: | |
| case PRID_IMP_NETLOGIC_XLP3XX: | |
| c->cputype = CPU_XLP; | |
| __cpu_name[cpu] = "Netlogic XLP"; | |
| break; | |
| case PRID_IMP_NETLOGIC_XLR732: | |
| case PRID_IMP_NETLOGIC_XLR716: | |
| case PRID_IMP_NETLOGIC_XLR532: | |
| case PRID_IMP_NETLOGIC_XLR308: | |
| case PRID_IMP_NETLOGIC_XLR532C: | |
| case PRID_IMP_NETLOGIC_XLR516C: | |
| case PRID_IMP_NETLOGIC_XLR508C: | |
| case PRID_IMP_NETLOGIC_XLR308C: | |
| c->cputype = CPU_XLR; | |
| __cpu_name[cpu] = "Netlogic XLR"; | |
| break; | |
| case PRID_IMP_NETLOGIC_XLS608: | |
| case PRID_IMP_NETLOGIC_XLS408: | |
| case PRID_IMP_NETLOGIC_XLS404: | |
| case PRID_IMP_NETLOGIC_XLS208: | |
| case PRID_IMP_NETLOGIC_XLS204: | |
| case PRID_IMP_NETLOGIC_XLS108: | |
| case PRID_IMP_NETLOGIC_XLS104: | |
| case PRID_IMP_NETLOGIC_XLS616B: | |
| case PRID_IMP_NETLOGIC_XLS608B: | |
| case PRID_IMP_NETLOGIC_XLS416B: | |
| case PRID_IMP_NETLOGIC_XLS412B: | |
| case PRID_IMP_NETLOGIC_XLS408B: | |
| case PRID_IMP_NETLOGIC_XLS404B: | |
| c->cputype = CPU_XLR; | |
| __cpu_name[cpu] = "Netlogic XLS"; | |
| break; | |
| default: | |
| pr_info("Unknown Netlogic chip id [%02x]!\n", | |
| c->processor_id); | |
| c->cputype = CPU_XLR; | |
| break; | |
| } | |
| if (c->cputype == CPU_XLP) { | |
| set_isa(c, MIPS_CPU_ISA_M64R2); | |
| c->options |= (MIPS_CPU_FPU | MIPS_CPU_ULRI | MIPS_CPU_MCHECK); | |
| /* This will be updated again after all threads are woken up */ | |
| c->tlbsize = ((read_c0_config6() >> 16) & 0xffff) + 1; | |
| } else { | |
| set_isa(c, MIPS_CPU_ISA_M64R1); | |
| c->tlbsize = ((read_c0_config1() >> 25) & 0x3f) + 1; | |
| } | |
| c->kscratch_mask = 0xf; | |
| } | |
| #ifdef CONFIG_64BIT | |
| /* For use by uaccess.h */ | |
| u64 __ua_limit; | |
| EXPORT_SYMBOL(__ua_limit); | |
| #endif | |
| const char *__cpu_name[NR_CPUS]; | |
| const char *__elf_platform; | |
| const char *__elf_base_platform; | |
| void cpu_probe(void) | |
| { | |
| struct cpuinfo_mips *c = ¤t_cpu_data; | |
| unsigned int cpu = smp_processor_id(); | |
| /* | |
| * Set a default elf platform, cpu probe may later | |
| * overwrite it with a more precise value | |
| */ | |
| set_elf_platform(cpu, "mips"); | |
| c->processor_id = PRID_IMP_UNKNOWN; | |
| c->fpu_id = FPIR_IMP_NONE; | |
| c->cputype = CPU_UNKNOWN; | |
| c->writecombine = _CACHE_UNCACHED; | |
| c->fpu_csr31 = FPU_CSR_RN; | |
| c->fpu_msk31 = FPU_CSR_RSVD | FPU_CSR_ABS2008 | FPU_CSR_NAN2008; | |
| c->processor_id = read_c0_prid(); | |
| switch (c->processor_id & PRID_COMP_MASK) { | |
| case PRID_COMP_LEGACY: | |
| cpu_probe_legacy(c, cpu); | |
| break; | |
| case PRID_COMP_MIPS: | |
| cpu_probe_mips(c, cpu); | |
| break; | |
| case PRID_COMP_ALCHEMY: | |
| cpu_probe_alchemy(c, cpu); | |
| break; | |
| case PRID_COMP_SIBYTE: | |
| cpu_probe_sibyte(c, cpu); | |
| break; | |
| case PRID_COMP_BROADCOM: | |
| cpu_probe_broadcom(c, cpu); | |
| break; | |
| case PRID_COMP_SANDCRAFT: | |
| cpu_probe_sandcraft(c, cpu); | |
| break; | |
| case PRID_COMP_NXP: | |
| cpu_probe_nxp(c, cpu); | |
| break; | |
| case PRID_COMP_CAVIUM: | |
| cpu_probe_cavium(c, cpu); | |
| break; | |
| case PRID_COMP_LOONGSON: | |
| cpu_probe_loongson(c, cpu); | |
| break; | |
| case PRID_COMP_INGENIC_13: | |
| case PRID_COMP_INGENIC_D0: | |
| case PRID_COMP_INGENIC_D1: | |
| case PRID_COMP_INGENIC_E1: | |
| cpu_probe_ingenic(c, cpu); | |
| break; | |
| case PRID_COMP_NETLOGIC: | |
| cpu_probe_netlogic(c, cpu); | |
| break; | |
| } | |
| BUG_ON(!__cpu_name[cpu]); | |
| BUG_ON(c->cputype == CPU_UNKNOWN); | |
| /* | |
| * Platform code can force the cpu type to optimize code | |
| * generation. In that case be sure the cpu type is correctly | |
| * manually setup otherwise it could trigger some nasty bugs. | |
| */ | |
| BUG_ON(current_cpu_type() != c->cputype); | |
| if (cpu_has_rixi) { | |
| /* Enable the RIXI exceptions */ | |
| set_c0_pagegrain(PG_IEC); | |
| back_to_back_c0_hazard(); | |
| /* Verify the IEC bit is set */ | |
| if (read_c0_pagegrain() & PG_IEC) | |
| c->options |= MIPS_CPU_RIXIEX; | |
| } | |
| if (mips_fpu_disabled) | |
| c->options &= ~MIPS_CPU_FPU; | |
| if (mips_dsp_disabled) | |
| c->ases &= ~(MIPS_ASE_DSP | MIPS_ASE_DSP2P); | |
| if (mips_htw_disabled) { | |
| c->options &= ~MIPS_CPU_HTW; | |
| write_c0_pwctl(read_c0_pwctl() & | |
| ~(1 << MIPS_PWCTL_PWEN_SHIFT)); | |
| } | |
| if (c->options & MIPS_CPU_FPU) | |
| cpu_set_fpu_opts(c); | |
| else | |
| cpu_set_nofpu_opts(c); | |
| if (cpu_has_mips_r2_r6) { | |
| c->srsets = ((read_c0_srsctl() >> 26) & 0x0f) + 1; | |
| /* R2 has Performance Counter Interrupt indicator */ | |
| c->options |= MIPS_CPU_PCI; | |
| } | |
| else | |
| c->srsets = 1; | |
| if (cpu_has_mips_r6) | |
| elf_hwcap |= HWCAP_MIPS_R6; | |
| if (cpu_has_msa) { | |
| c->msa_id = cpu_get_msa_id(); | |
| WARN(c->msa_id & MSA_IR_WRPF, | |
| "Vector register partitioning unimplemented!"); | |
| elf_hwcap |= HWCAP_MIPS_MSA; | |
| } | |
| if (cpu_has_mips16) | |
| elf_hwcap |= HWCAP_MIPS_MIPS16; | |
| if (cpu_has_mdmx) | |
| elf_hwcap |= HWCAP_MIPS_MDMX; | |
| if (cpu_has_mips3d) | |
| elf_hwcap |= HWCAP_MIPS_MIPS3D; | |
| if (cpu_has_smartmips) | |
| elf_hwcap |= HWCAP_MIPS_SMARTMIPS; | |
| if (cpu_has_dsp) | |
| elf_hwcap |= HWCAP_MIPS_DSP; | |
| if (cpu_has_dsp2) | |
| elf_hwcap |= HWCAP_MIPS_DSP2; | |
| if (cpu_has_dsp3) | |
| elf_hwcap |= HWCAP_MIPS_DSP3; | |
| if (cpu_has_mips16e2) | |
| elf_hwcap |= HWCAP_MIPS_MIPS16E2; | |
| if (cpu_has_loongson_mmi) | |
| elf_hwcap |= HWCAP_LOONGSON_MMI; | |
| if (cpu_has_loongson_ext) | |
| elf_hwcap |= HWCAP_LOONGSON_EXT; | |
| if (cpu_has_loongson_ext2) | |
| elf_hwcap |= HWCAP_LOONGSON_EXT2; | |
| if (cpu_has_vz) | |
| cpu_probe_vz(c); | |
| cpu_probe_vmbits(c); | |
| /* Synthesize CPUCFG data if running on Loongson processors; | |
| * no-op otherwise. | |
| * | |
| * This looks at previously probed features, so keep this at bottom. | |
| */ | |
| loongson3_cpucfg_synthesize_data(c); | |
| #ifdef CONFIG_64BIT | |
| if (cpu == 0) | |
| __ua_limit = ~((1ull << cpu_vmbits) - 1); | |
| #endif | |
| } | |
| void cpu_report(void) | |
| { | |
| struct cpuinfo_mips *c = ¤t_cpu_data; | |
| pr_info("CPU%d revision is: %08x (%s)\n", | |
| smp_processor_id(), c->processor_id, cpu_name_string()); | |
| if (c->options & MIPS_CPU_FPU) | |
| printk(KERN_INFO "FPU revision is: %08x\n", c->fpu_id); | |
| if (cpu_has_msa) | |
| pr_info("MSA revision is: %08x\n", c->msa_id); | |
| } | |
| void cpu_set_cluster(struct cpuinfo_mips *cpuinfo, unsigned int cluster) | |
| { | |
| /* Ensure the core number fits in the field */ | |
| WARN_ON(cluster > (MIPS_GLOBALNUMBER_CLUSTER >> | |
| MIPS_GLOBALNUMBER_CLUSTER_SHF)); | |
| cpuinfo->globalnumber &= ~MIPS_GLOBALNUMBER_CLUSTER; | |
| cpuinfo->globalnumber |= cluster << MIPS_GLOBALNUMBER_CLUSTER_SHF; | |
| } | |
| void cpu_set_core(struct cpuinfo_mips *cpuinfo, unsigned int core) | |
| { | |
| /* Ensure the core number fits in the field */ | |
| WARN_ON(core > (MIPS_GLOBALNUMBER_CORE >> MIPS_GLOBALNUMBER_CORE_SHF)); | |
| cpuinfo->globalnumber &= ~MIPS_GLOBALNUMBER_CORE; | |
| cpuinfo->globalnumber |= core << MIPS_GLOBALNUMBER_CORE_SHF; | |
| } | |
| void cpu_set_vpe_id(struct cpuinfo_mips *cpuinfo, unsigned int vpe) | |
| { | |
| /* Ensure the VP(E) ID fits in the field */ | |
| WARN_ON(vpe > (MIPS_GLOBALNUMBER_VP >> MIPS_GLOBALNUMBER_VP_SHF)); | |
| /* Ensure we're not using VP(E)s without support */ | |
| WARN_ON(vpe && !IS_ENABLED(CONFIG_MIPS_MT_SMP) && | |
| !IS_ENABLED(CONFIG_CPU_MIPSR6)); | |
| cpuinfo->globalnumber &= ~MIPS_GLOBALNUMBER_VP; | |
| cpuinfo->globalnumber |= vpe << MIPS_GLOBALNUMBER_VP_SHF; | |
| } |