| // SPDX-License-Identifier: GPL-2.0-or-later | |
| /* | |
| * Intel CPU Microcode Update Driver for Linux | |
| * | |
| * Copyright (C) 2000-2006 Tigran Aivazian <aivazian.tigran@gmail.com> | |
| * 2006 Shaohua Li <shaohua.li@intel.com> | |
| * | |
| * Intel CPU microcode early update for Linux | |
| * | |
| * Copyright (C) 2012 Fenghua Yu <fenghua.yu@intel.com> | |
| * H Peter Anvin" <hpa@zytor.com> | |
| */ | |
| /* | |
| * This needs to be before all headers so that pr_debug in printk.h doesn't turn | |
| * printk calls into no_printk(). | |
| * | |
| *#define DEBUG | |
| */ | |
| #define pr_fmt(fmt) "microcode: " fmt | |
| #include <linux/earlycpio.h> | |
| #include <linux/firmware.h> | |
| #include <linux/uaccess.h> | |
| #include <linux/vmalloc.h> | |
| #include <linux/initrd.h> | |
| #include <linux/kernel.h> | |
| #include <linux/slab.h> | |
| #include <linux/cpu.h> | |
| #include <linux/uio.h> | |
| #include <linux/mm.h> | |
| #include <asm/microcode_intel.h> | |
| #include <asm/intel-family.h> | |
| #include <asm/processor.h> | |
| #include <asm/tlbflush.h> | |
| #include <asm/setup.h> | |
| #include <asm/msr.h> | |
| static const char ucode_path[] = "kernel/x86/microcode/GenuineIntel.bin"; | |
| /* Current microcode patch used in early patching on the APs. */ | |
| static struct microcode_intel *intel_ucode_patch; | |
| /* last level cache size per core */ | |
| static int llc_size_per_core; | |
| static inline bool cpu_signatures_match(unsigned int s1, unsigned int p1, | |
| unsigned int s2, unsigned int p2) | |
| { | |
| if (s1 != s2) | |
| return false; | |
| /* Processor flags are either both 0 ... */ | |
| if (!p1 && !p2) | |
| return true; | |
| /* ... or they intersect. */ | |
| return p1 & p2; | |
| } | |
| /* | |
| * Returns 1 if update has been found, 0 otherwise. | |
| */ | |
| static int find_matching_signature(void *mc, unsigned int csig, int cpf) | |
| { | |
| struct microcode_header_intel *mc_hdr = mc; | |
| struct extended_sigtable *ext_hdr; | |
| struct extended_signature *ext_sig; | |
| int i; | |
| if (cpu_signatures_match(csig, cpf, mc_hdr->sig, mc_hdr->pf)) | |
| return 1; | |
| /* Look for ext. headers: */ | |
| if (get_totalsize(mc_hdr) <= get_datasize(mc_hdr) + MC_HEADER_SIZE) | |
| return 0; | |
| ext_hdr = mc + get_datasize(mc_hdr) + MC_HEADER_SIZE; | |
| ext_sig = (void *)ext_hdr + EXT_HEADER_SIZE; | |
| for (i = 0; i < ext_hdr->count; i++) { | |
| if (cpu_signatures_match(csig, cpf, ext_sig->sig, ext_sig->pf)) | |
| return 1; | |
| ext_sig++; | |
| } | |
| return 0; | |
| } | |
| /* | |
| * Returns 1 if update has been found, 0 otherwise. | |
| */ | |
| static int has_newer_microcode(void *mc, unsigned int csig, int cpf, int new_rev) | |
| { | |
| struct microcode_header_intel *mc_hdr = mc; | |
| if (mc_hdr->rev <= new_rev) | |
| return 0; | |
| return find_matching_signature(mc, csig, cpf); | |
| } | |
| static struct ucode_patch *memdup_patch(void *data, unsigned int size) | |
| { | |
| struct ucode_patch *p; | |
| p = kzalloc(sizeof(struct ucode_patch), GFP_KERNEL); | |
| if (!p) | |
| return NULL; | |
| p->data = kmemdup(data, size, GFP_KERNEL); | |
| if (!p->data) { | |
| kfree(p); | |
| return NULL; | |
| } | |
| return p; | |
| } | |
| static void save_microcode_patch(struct ucode_cpu_info *uci, void *data, unsigned int size) | |
| { | |
| struct microcode_header_intel *mc_hdr, *mc_saved_hdr; | |
| struct ucode_patch *iter, *tmp, *p = NULL; | |
| bool prev_found = false; | |
| unsigned int sig, pf; | |
| mc_hdr = (struct microcode_header_intel *)data; | |
| list_for_each_entry_safe(iter, tmp, µcode_cache, plist) { | |
| mc_saved_hdr = (struct microcode_header_intel *)iter->data; | |
| sig = mc_saved_hdr->sig; | |
| pf = mc_saved_hdr->pf; | |
| if (find_matching_signature(data, sig, pf)) { | |
| prev_found = true; | |
| if (mc_hdr->rev <= mc_saved_hdr->rev) | |
| continue; | |
| p = memdup_patch(data, size); | |
| if (!p) | |
| pr_err("Error allocating buffer %p\n", data); | |
| else { | |
| list_replace(&iter->plist, &p->plist); | |
| kfree(iter->data); | |
| kfree(iter); | |
| } | |
| } | |
| } | |
| /* | |
| * There weren't any previous patches found in the list cache; save the | |
| * newly found. | |
| */ | |
| if (!prev_found) { | |
| p = memdup_patch(data, size); | |
| if (!p) | |
| pr_err("Error allocating buffer for %p\n", data); | |
| else | |
| list_add_tail(&p->plist, µcode_cache); | |
| } | |
| if (!p) | |
| return; | |
| if (!find_matching_signature(p->data, uci->cpu_sig.sig, uci->cpu_sig.pf)) | |
| return; | |
| /* | |
| * Save for early loading. On 32-bit, that needs to be a physical | |
| * address as the APs are running from physical addresses, before | |
| * paging has been enabled. | |
| */ | |
| if (IS_ENABLED(CONFIG_X86_32)) | |
| intel_ucode_patch = (struct microcode_intel *)__pa_nodebug(p->data); | |
| else | |
| intel_ucode_patch = p->data; | |
| } | |
| static int microcode_sanity_check(void *mc, int print_err) | |
| { | |
| unsigned long total_size, data_size, ext_table_size; | |
| struct microcode_header_intel *mc_header = mc; | |
| struct extended_sigtable *ext_header = NULL; | |
| u32 sum, orig_sum, ext_sigcount = 0, i; | |
| struct extended_signature *ext_sig; | |
| total_size = get_totalsize(mc_header); | |
| data_size = get_datasize(mc_header); | |
| if (data_size + MC_HEADER_SIZE > total_size) { | |
| if (print_err) | |
| pr_err("Error: bad microcode data file size.\n"); | |
| return -EINVAL; | |
| } | |
| if (mc_header->ldrver != 1 || mc_header->hdrver != 1) { | |
| if (print_err) | |
| pr_err("Error: invalid/unknown microcode update format.\n"); | |
| return -EINVAL; | |
| } | |
| ext_table_size = total_size - (MC_HEADER_SIZE + data_size); | |
| if (ext_table_size) { | |
| u32 ext_table_sum = 0; | |
| u32 *ext_tablep; | |
| if ((ext_table_size < EXT_HEADER_SIZE) | |
| || ((ext_table_size - EXT_HEADER_SIZE) % EXT_SIGNATURE_SIZE)) { | |
| if (print_err) | |
| pr_err("Error: truncated extended signature table.\n"); | |
| return -EINVAL; | |
| } | |
| ext_header = mc + MC_HEADER_SIZE + data_size; | |
| if (ext_table_size != exttable_size(ext_header)) { | |
| if (print_err) | |
| pr_err("Error: extended signature table size mismatch.\n"); | |
| return -EFAULT; | |
| } | |
| ext_sigcount = ext_header->count; | |
| /* | |
| * Check extended table checksum: the sum of all dwords that | |
| * comprise a valid table must be 0. | |
| */ | |
| ext_tablep = (u32 *)ext_header; | |
| i = ext_table_size / sizeof(u32); | |
| while (i--) | |
| ext_table_sum += ext_tablep[i]; | |
| if (ext_table_sum) { | |
| if (print_err) | |
| pr_warn("Bad extended signature table checksum, aborting.\n"); | |
| return -EINVAL; | |
| } | |
| } | |
| /* | |
| * Calculate the checksum of update data and header. The checksum of | |
| * valid update data and header including the extended signature table | |
| * must be 0. | |
| */ | |
| orig_sum = 0; | |
| i = (MC_HEADER_SIZE + data_size) / sizeof(u32); | |
| while (i--) | |
| orig_sum += ((u32 *)mc)[i]; | |
| if (orig_sum) { | |
| if (print_err) | |
| pr_err("Bad microcode data checksum, aborting.\n"); | |
| return -EINVAL; | |
| } | |
| if (!ext_table_size) | |
| return 0; | |
| /* | |
| * Check extended signature checksum: 0 => valid. | |
| */ | |
| for (i = 0; i < ext_sigcount; i++) { | |
| ext_sig = (void *)ext_header + EXT_HEADER_SIZE + | |
| EXT_SIGNATURE_SIZE * i; | |
| sum = (mc_header->sig + mc_header->pf + mc_header->cksum) - | |
| (ext_sig->sig + ext_sig->pf + ext_sig->cksum); | |
| if (sum) { | |
| if (print_err) | |
| pr_err("Bad extended signature checksum, aborting.\n"); | |
| return -EINVAL; | |
| } | |
| } | |
| return 0; | |
| } | |
| /* | |
| * Get microcode matching with BSP's model. Only CPUs with the same model as | |
| * BSP can stay in the platform. | |
| */ | |
| static struct microcode_intel * | |
| scan_microcode(void *data, size_t size, struct ucode_cpu_info *uci, bool save) | |
| { | |
| struct microcode_header_intel *mc_header; | |
| struct microcode_intel *patch = NULL; | |
| unsigned int mc_size; | |
| while (size) { | |
| if (size < sizeof(struct microcode_header_intel)) | |
| break; | |
| mc_header = (struct microcode_header_intel *)data; | |
| mc_size = get_totalsize(mc_header); | |
| if (!mc_size || | |
| mc_size > size || | |
| microcode_sanity_check(data, 0) < 0) | |
| break; | |
| size -= mc_size; | |
| if (!find_matching_signature(data, uci->cpu_sig.sig, | |
| uci->cpu_sig.pf)) { | |
| data += mc_size; | |
| continue; | |
| } | |
| if (save) { | |
| save_microcode_patch(uci, data, mc_size); | |
| goto next; | |
| } | |
| if (!patch) { | |
| if (!has_newer_microcode(data, | |
| uci->cpu_sig.sig, | |
| uci->cpu_sig.pf, | |
| uci->cpu_sig.rev)) | |
| goto next; | |
| } else { | |
| struct microcode_header_intel *phdr = &patch->hdr; | |
| if (!has_newer_microcode(data, | |
| phdr->sig, | |
| phdr->pf, | |
| phdr->rev)) | |
| goto next; | |
| } | |
| /* We have a newer patch, save it. */ | |
| patch = data; | |
| next: | |
| data += mc_size; | |
| } | |
| if (size) | |
| return NULL; | |
| return patch; | |
| } | |
| static int collect_cpu_info_early(struct ucode_cpu_info *uci) | |
| { | |
| unsigned int val[2]; | |
| unsigned int family, model; | |
| struct cpu_signature csig = { 0 }; | |
| unsigned int eax, ebx, ecx, edx; | |
| memset(uci, 0, sizeof(*uci)); | |
| eax = 0x00000001; | |
| ecx = 0; | |
| native_cpuid(&eax, &ebx, &ecx, &edx); | |
| csig.sig = eax; | |
| family = x86_family(eax); | |
| model = x86_model(eax); | |
| if ((model >= 5) || (family > 6)) { | |
| /* get processor flags from MSR 0x17 */ | |
| native_rdmsr(MSR_IA32_PLATFORM_ID, val[0], val[1]); | |
| csig.pf = 1 << ((val[1] >> 18) & 7); | |
| } | |
| csig.rev = intel_get_microcode_revision(); | |
| uci->cpu_sig = csig; | |
| uci->valid = 1; | |
| return 0; | |
| } | |
| static void show_saved_mc(void) | |
| { | |
| #ifdef DEBUG | |
| int i = 0, j; | |
| unsigned int sig, pf, rev, total_size, data_size, date; | |
| struct ucode_cpu_info uci; | |
| struct ucode_patch *p; | |
| if (list_empty(µcode_cache)) { | |
| pr_debug("no microcode data saved.\n"); | |
| return; | |
| } | |
| collect_cpu_info_early(&uci); | |
| sig = uci.cpu_sig.sig; | |
| pf = uci.cpu_sig.pf; | |
| rev = uci.cpu_sig.rev; | |
| pr_debug("CPU: sig=0x%x, pf=0x%x, rev=0x%x\n", sig, pf, rev); | |
| list_for_each_entry(p, µcode_cache, plist) { | |
| struct microcode_header_intel *mc_saved_header; | |
| struct extended_sigtable *ext_header; | |
| struct extended_signature *ext_sig; | |
| int ext_sigcount; | |
| mc_saved_header = (struct microcode_header_intel *)p->data; | |
| sig = mc_saved_header->sig; | |
| pf = mc_saved_header->pf; | |
| rev = mc_saved_header->rev; | |
| date = mc_saved_header->date; | |
| total_size = get_totalsize(mc_saved_header); | |
| data_size = get_datasize(mc_saved_header); | |
| pr_debug("mc_saved[%d]: sig=0x%x, pf=0x%x, rev=0x%x, total size=0x%x, date = %04x-%02x-%02x\n", | |
| i++, sig, pf, rev, total_size, | |
| date & 0xffff, | |
| date >> 24, | |
| (date >> 16) & 0xff); | |
| /* Look for ext. headers: */ | |
| if (total_size <= data_size + MC_HEADER_SIZE) | |
| continue; | |
| ext_header = (void *)mc_saved_header + data_size + MC_HEADER_SIZE; | |
| ext_sigcount = ext_header->count; | |
| ext_sig = (void *)ext_header + EXT_HEADER_SIZE; | |
| for (j = 0; j < ext_sigcount; j++) { | |
| sig = ext_sig->sig; | |
| pf = ext_sig->pf; | |
| pr_debug("\tExtended[%d]: sig=0x%x, pf=0x%x\n", | |
| j, sig, pf); | |
| ext_sig++; | |
| } | |
| } | |
| #endif | |
| } | |
| /* | |
| * Save this microcode patch. It will be loaded early when a CPU is | |
| * hot-added or resumes. | |
| */ | |
| static void save_mc_for_early(struct ucode_cpu_info *uci, u8 *mc, unsigned int size) | |
| { | |
| /* Synchronization during CPU hotplug. */ | |
| static DEFINE_MUTEX(x86_cpu_microcode_mutex); | |
| mutex_lock(&x86_cpu_microcode_mutex); | |
| save_microcode_patch(uci, mc, size); | |
| show_saved_mc(); | |
| mutex_unlock(&x86_cpu_microcode_mutex); | |
| } | |
| static bool load_builtin_intel_microcode(struct cpio_data *cp) | |
| { | |
| unsigned int eax = 1, ebx, ecx = 0, edx; | |
| char name[30]; | |
| if (IS_ENABLED(CONFIG_X86_32)) | |
| return false; | |
| native_cpuid(&eax, &ebx, &ecx, &edx); | |
| sprintf(name, "intel-ucode/%02x-%02x-%02x", | |
| x86_family(eax), x86_model(eax), x86_stepping(eax)); | |
| return get_builtin_firmware(cp, name); | |
| } | |
| /* | |
| * Print ucode update info. | |
| */ | |
| static void | |
| print_ucode_info(struct ucode_cpu_info *uci, unsigned int date) | |
| { | |
| pr_info_once("microcode updated early to revision 0x%x, date = %04x-%02x-%02x\n", | |
| uci->cpu_sig.rev, | |
| date & 0xffff, | |
| date >> 24, | |
| (date >> 16) & 0xff); | |
| } | |
| #ifdef CONFIG_X86_32 | |
| static int delay_ucode_info; | |
| static int current_mc_date; | |
| /* | |
| * Print early updated ucode info after printk works. This is delayed info dump. | |
| */ | |
| void show_ucode_info_early(void) | |
| { | |
| struct ucode_cpu_info uci; | |
| if (delay_ucode_info) { | |
| collect_cpu_info_early(&uci); | |
| print_ucode_info(&uci, current_mc_date); | |
| delay_ucode_info = 0; | |
| } | |
| } | |
| /* | |
| * At this point, we can not call printk() yet. Delay printing microcode info in | |
| * show_ucode_info_early() until printk() works. | |
| */ | |
| static void print_ucode(struct ucode_cpu_info *uci) | |
| { | |
| struct microcode_intel *mc; | |
| int *delay_ucode_info_p; | |
| int *current_mc_date_p; | |
| mc = uci->mc; | |
| if (!mc) | |
| return; | |
| delay_ucode_info_p = (int *)__pa_nodebug(&delay_ucode_info); | |
| current_mc_date_p = (int *)__pa_nodebug(¤t_mc_date); | |
| *delay_ucode_info_p = 1; | |
| *current_mc_date_p = mc->hdr.date; | |
| } | |
| #else | |
| static inline void print_ucode(struct ucode_cpu_info *uci) | |
| { | |
| struct microcode_intel *mc; | |
| mc = uci->mc; | |
| if (!mc) | |
| return; | |
| print_ucode_info(uci, mc->hdr.date); | |
| } | |
| #endif | |
| static int apply_microcode_early(struct ucode_cpu_info *uci, bool early) | |
| { | |
| struct microcode_intel *mc; | |
| u32 rev; | |
| mc = uci->mc; | |
| if (!mc) | |
| return 0; | |
| /* | |
| * Save us the MSR write below - which is a particular expensive | |
| * operation - when the other hyperthread has updated the microcode | |
| * already. | |
| */ | |
| rev = intel_get_microcode_revision(); | |
| if (rev >= mc->hdr.rev) { | |
| uci->cpu_sig.rev = rev; | |
| return UCODE_OK; | |
| } | |
| /* | |
| * Writeback and invalidate caches before updating microcode to avoid | |
| * internal issues depending on what the microcode is updating. | |
| */ | |
| native_wbinvd(); | |
| /* write microcode via MSR 0x79 */ | |
| native_wrmsrl(MSR_IA32_UCODE_WRITE, (unsigned long)mc->bits); | |
| rev = intel_get_microcode_revision(); | |
| if (rev != mc->hdr.rev) | |
| return -1; | |
| uci->cpu_sig.rev = rev; | |
| if (early) | |
| print_ucode(uci); | |
| else | |
| print_ucode_info(uci, mc->hdr.date); | |
| return 0; | |
| } | |
| int __init save_microcode_in_initrd_intel(void) | |
| { | |
| struct ucode_cpu_info uci; | |
| struct cpio_data cp; | |
| /* | |
| * initrd is going away, clear patch ptr. We will scan the microcode one | |
| * last time before jettisoning and save a patch, if found. Then we will | |
| * update that pointer too, with a stable patch address to use when | |
| * resuming the cores. | |
| */ | |
| intel_ucode_patch = NULL; | |
| if (!load_builtin_intel_microcode(&cp)) | |
| cp = find_microcode_in_initrd(ucode_path, false); | |
| if (!(cp.data && cp.size)) | |
| return 0; | |
| collect_cpu_info_early(&uci); | |
| scan_microcode(cp.data, cp.size, &uci, true); | |
| show_saved_mc(); | |
| return 0; | |
| } | |
| /* | |
| * @res_patch, output: a pointer to the patch we found. | |
| */ | |
| static struct microcode_intel *__load_ucode_intel(struct ucode_cpu_info *uci) | |
| { | |
| static const char *path; | |
| struct cpio_data cp; | |
| bool use_pa; | |
| if (IS_ENABLED(CONFIG_X86_32)) { | |
| path = (const char *)__pa_nodebug(ucode_path); | |
| use_pa = true; | |
| } else { | |
| path = ucode_path; | |
| use_pa = false; | |
| } | |
| /* try built-in microcode first */ | |
| if (!load_builtin_intel_microcode(&cp)) | |
| cp = find_microcode_in_initrd(path, use_pa); | |
| if (!(cp.data && cp.size)) | |
| return NULL; | |
| collect_cpu_info_early(uci); | |
| return scan_microcode(cp.data, cp.size, uci, false); | |
| } | |
| void __init load_ucode_intel_bsp(void) | |
| { | |
| struct microcode_intel *patch; | |
| struct ucode_cpu_info uci; | |
| patch = __load_ucode_intel(&uci); | |
| if (!patch) | |
| return; | |
| uci.mc = patch; | |
| apply_microcode_early(&uci, true); | |
| } | |
| void load_ucode_intel_ap(void) | |
| { | |
| struct microcode_intel *patch, **iup; | |
| struct ucode_cpu_info uci; | |
| if (IS_ENABLED(CONFIG_X86_32)) | |
| iup = (struct microcode_intel **) __pa_nodebug(&intel_ucode_patch); | |
| else | |
| iup = &intel_ucode_patch; | |
| reget: | |
| if (!*iup) { | |
| patch = __load_ucode_intel(&uci); | |
| if (!patch) | |
| return; | |
| *iup = patch; | |
| } | |
| uci.mc = *iup; | |
| if (apply_microcode_early(&uci, true)) { | |
| /* Mixed-silicon system? Try to refetch the proper patch: */ | |
| *iup = NULL; | |
| goto reget; | |
| } | |
| } | |
| static struct microcode_intel *find_patch(struct ucode_cpu_info *uci) | |
| { | |
| struct microcode_header_intel *phdr; | |
| struct ucode_patch *iter, *tmp; | |
| list_for_each_entry_safe(iter, tmp, µcode_cache, plist) { | |
| phdr = (struct microcode_header_intel *)iter->data; | |
| if (phdr->rev <= uci->cpu_sig.rev) | |
| continue; | |
| if (!find_matching_signature(phdr, | |
| uci->cpu_sig.sig, | |
| uci->cpu_sig.pf)) | |
| continue; | |
| return iter->data; | |
| } | |
| return NULL; | |
| } | |
| void reload_ucode_intel(void) | |
| { | |
| struct microcode_intel *p; | |
| struct ucode_cpu_info uci; | |
| collect_cpu_info_early(&uci); | |
| p = find_patch(&uci); | |
| if (!p) | |
| return; | |
| uci.mc = p; | |
| apply_microcode_early(&uci, false); | |
| } | |
| static int collect_cpu_info(int cpu_num, struct cpu_signature *csig) | |
| { | |
| static struct cpu_signature prev; | |
| struct cpuinfo_x86 *c = &cpu_data(cpu_num); | |
| unsigned int val[2]; | |
| memset(csig, 0, sizeof(*csig)); | |
| csig->sig = cpuid_eax(0x00000001); | |
| if ((c->x86_model >= 5) || (c->x86 > 6)) { | |
| /* get processor flags from MSR 0x17 */ | |
| rdmsr(MSR_IA32_PLATFORM_ID, val[0], val[1]); | |
| csig->pf = 1 << ((val[1] >> 18) & 7); | |
| } | |
| csig->rev = c->microcode; | |
| /* No extra locking on prev, races are harmless. */ | |
| if (csig->sig != prev.sig || csig->pf != prev.pf || csig->rev != prev.rev) { | |
| pr_info("sig=0x%x, pf=0x%x, revision=0x%x\n", | |
| csig->sig, csig->pf, csig->rev); | |
| prev = *csig; | |
| } | |
| return 0; | |
| } | |
| static enum ucode_state apply_microcode_intel(int cpu) | |
| { | |
| struct ucode_cpu_info *uci = ucode_cpu_info + cpu; | |
| struct cpuinfo_x86 *c = &cpu_data(cpu); | |
| bool bsp = c->cpu_index == boot_cpu_data.cpu_index; | |
| struct microcode_intel *mc; | |
| enum ucode_state ret; | |
| static int prev_rev; | |
| u32 rev; | |
| /* We should bind the task to the CPU */ | |
| if (WARN_ON(raw_smp_processor_id() != cpu)) | |
| return UCODE_ERROR; | |
| /* Look for a newer patch in our cache: */ | |
| mc = find_patch(uci); | |
| if (!mc) { | |
| mc = uci->mc; | |
| if (!mc) | |
| return UCODE_NFOUND; | |
| } | |
| /* | |
| * Save us the MSR write below - which is a particular expensive | |
| * operation - when the other hyperthread has updated the microcode | |
| * already. | |
| */ | |
| rev = intel_get_microcode_revision(); | |
| if (rev >= mc->hdr.rev) { | |
| ret = UCODE_OK; | |
| goto out; | |
| } | |
| /* | |
| * Writeback and invalidate caches before updating microcode to avoid | |
| * internal issues depending on what the microcode is updating. | |
| */ | |
| native_wbinvd(); | |
| /* write microcode via MSR 0x79 */ | |
| wrmsrl(MSR_IA32_UCODE_WRITE, (unsigned long)mc->bits); | |
| rev = intel_get_microcode_revision(); | |
| if (rev != mc->hdr.rev) { | |
| pr_err("CPU%d update to revision 0x%x failed\n", | |
| cpu, mc->hdr.rev); | |
| return UCODE_ERROR; | |
| } | |
| if (bsp && rev != prev_rev) { | |
| pr_info("updated to revision 0x%x, date = %04x-%02x-%02x\n", | |
| rev, | |
| mc->hdr.date & 0xffff, | |
| mc->hdr.date >> 24, | |
| (mc->hdr.date >> 16) & 0xff); | |
| prev_rev = rev; | |
| } | |
| ret = UCODE_UPDATED; | |
| out: | |
| uci->cpu_sig.rev = rev; | |
| c->microcode = rev; | |
| /* Update boot_cpu_data's revision too, if we're on the BSP: */ | |
| if (bsp) | |
| boot_cpu_data.microcode = rev; | |
| return ret; | |
| } | |
| static enum ucode_state generic_load_microcode(int cpu, struct iov_iter *iter) | |
| { | |
| struct ucode_cpu_info *uci = ucode_cpu_info + cpu; | |
| unsigned int curr_mc_size = 0, new_mc_size = 0; | |
| enum ucode_state ret = UCODE_OK; | |
| int new_rev = uci->cpu_sig.rev; | |
| u8 *new_mc = NULL, *mc = NULL; | |
| unsigned int csig, cpf; | |
| while (iov_iter_count(iter)) { | |
| struct microcode_header_intel mc_header; | |
| unsigned int mc_size, data_size; | |
| u8 *data; | |
| if (!copy_from_iter_full(&mc_header, sizeof(mc_header), iter)) { | |
| pr_err("error! Truncated or inaccessible header in microcode data file\n"); | |
| break; | |
| } | |
| mc_size = get_totalsize(&mc_header); | |
| if (mc_size < sizeof(mc_header)) { | |
| pr_err("error! Bad data in microcode data file (totalsize too small)\n"); | |
| break; | |
| } | |
| data_size = mc_size - sizeof(mc_header); | |
| if (data_size > iov_iter_count(iter)) { | |
| pr_err("error! Bad data in microcode data file (truncated file?)\n"); | |
| break; | |
| } | |
| /* For performance reasons, reuse mc area when possible */ | |
| if (!mc || mc_size > curr_mc_size) { | |
| vfree(mc); | |
| mc = vmalloc(mc_size); | |
| if (!mc) | |
| break; | |
| curr_mc_size = mc_size; | |
| } | |
| memcpy(mc, &mc_header, sizeof(mc_header)); | |
| data = mc + sizeof(mc_header); | |
| if (!copy_from_iter_full(data, data_size, iter) || | |
| microcode_sanity_check(mc, 1) < 0) { | |
| break; | |
| } | |
| csig = uci->cpu_sig.sig; | |
| cpf = uci->cpu_sig.pf; | |
| if (has_newer_microcode(mc, csig, cpf, new_rev)) { | |
| vfree(new_mc); | |
| new_rev = mc_header.rev; | |
| new_mc = mc; | |
| new_mc_size = mc_size; | |
| mc = NULL; /* trigger new vmalloc */ | |
| ret = UCODE_NEW; | |
| } | |
| } | |
| vfree(mc); | |
| if (iov_iter_count(iter)) { | |
| vfree(new_mc); | |
| return UCODE_ERROR; | |
| } | |
| if (!new_mc) | |
| return UCODE_NFOUND; | |
| vfree(uci->mc); | |
| uci->mc = (struct microcode_intel *)new_mc; | |
| /* | |
| * If early loading microcode is supported, save this mc into | |
| * permanent memory. So it will be loaded early when a CPU is hot added | |
| * or resumes. | |
| */ | |
| save_mc_for_early(uci, new_mc, new_mc_size); | |
| pr_debug("CPU%d found a matching microcode update with version 0x%x (current=0x%x)\n", | |
| cpu, new_rev, uci->cpu_sig.rev); | |
| return ret; | |
| } | |
| static bool is_blacklisted(unsigned int cpu) | |
| { | |
| struct cpuinfo_x86 *c = &cpu_data(cpu); | |
| /* | |
| * Late loading on model 79 with microcode revision less than 0x0b000021 | |
| * and LLC size per core bigger than 2.5MB may result in a system hang. | |
| * This behavior is documented in item BDF90, #334165 (Intel Xeon | |
| * Processor E7-8800/4800 v4 Product Family). | |
| */ | |
| if (c->x86 == 6 && | |
| c->x86_model == INTEL_FAM6_BROADWELL_X && | |
| c->x86_stepping == 0x01 && | |
| llc_size_per_core > 2621440 && | |
| c->microcode < 0x0b000021) { | |
| pr_err_once("Erratum BDF90: late loading with revision < 0x0b000021 (0x%x) disabled.\n", c->microcode); | |
| pr_err_once("Please consider either early loading through initrd/built-in or a potential BIOS update.\n"); | |
| return true; | |
| } | |
| return false; | |
| } | |
| static enum ucode_state request_microcode_fw(int cpu, struct device *device, | |
| bool refresh_fw) | |
| { | |
| struct cpuinfo_x86 *c = &cpu_data(cpu); | |
| const struct firmware *firmware; | |
| struct iov_iter iter; | |
| enum ucode_state ret; | |
| struct kvec kvec; | |
| char name[30]; | |
| if (is_blacklisted(cpu)) | |
| return UCODE_NFOUND; | |
| sprintf(name, "intel-ucode/%02x-%02x-%02x", | |
| c->x86, c->x86_model, c->x86_stepping); | |
| if (request_firmware_direct(&firmware, name, device)) { | |
| pr_debug("data file %s load failed\n", name); | |
| return UCODE_NFOUND; | |
| } | |
| kvec.iov_base = (void *)firmware->data; | |
| kvec.iov_len = firmware->size; | |
| iov_iter_kvec(&iter, WRITE, &kvec, 1, firmware->size); | |
| ret = generic_load_microcode(cpu, &iter); | |
| release_firmware(firmware); | |
| return ret; | |
| } | |
| static enum ucode_state | |
| request_microcode_user(int cpu, const void __user *buf, size_t size) | |
| { | |
| struct iov_iter iter; | |
| struct iovec iov; | |
| if (is_blacklisted(cpu)) | |
| return UCODE_NFOUND; | |
| iov.iov_base = (void __user *)buf; | |
| iov.iov_len = size; | |
| iov_iter_init(&iter, WRITE, &iov, 1, size); | |
| return generic_load_microcode(cpu, &iter); | |
| } | |
| static struct microcode_ops microcode_intel_ops = { | |
| .request_microcode_user = request_microcode_user, | |
| .request_microcode_fw = request_microcode_fw, | |
| .collect_cpu_info = collect_cpu_info, | |
| .apply_microcode = apply_microcode_intel, | |
| }; | |
| static int __init calc_llc_size_per_core(struct cpuinfo_x86 *c) | |
| { | |
| u64 llc_size = c->x86_cache_size * 1024ULL; | |
| do_div(llc_size, c->x86_max_cores); | |
| return (int)llc_size; | |
| } | |
| struct microcode_ops * __init init_intel_microcode(void) | |
| { | |
| struct cpuinfo_x86 *c = &boot_cpu_data; | |
| if (c->x86_vendor != X86_VENDOR_INTEL || c->x86 < 6 || | |
| cpu_has(c, X86_FEATURE_IA64)) { | |
| pr_err("Intel CPU family 0x%x not supported\n", c->x86); | |
| return NULL; | |
| } | |
| llc_size_per_core = calc_llc_size_per_core(c); | |
| return µcode_intel_ops; | |
| } |