| // SPDX-License-Identifier: GPL-2.0-only | |
| /* | |
| * x86 FPU boot time init code: | |
| */ | |
| #include <asm/fpu/internal.h> | |
| #include <asm/tlbflush.h> | |
| #include <asm/setup.h> | |
| #include <linux/sched.h> | |
| #include <linux/sched/task.h> | |
| #include <linux/init.h> | |
| /* | |
| * Initialize the registers found in all CPUs, CR0 and CR4: | |
| */ | |
| static void fpu__init_cpu_generic(void) | |
| { | |
| unsigned long cr0; | |
| unsigned long cr4_mask = 0; | |
| if (boot_cpu_has(X86_FEATURE_FXSR)) | |
| cr4_mask |= X86_CR4_OSFXSR; | |
| if (boot_cpu_has(X86_FEATURE_XMM)) | |
| cr4_mask |= X86_CR4_OSXMMEXCPT; | |
| if (cr4_mask) | |
| cr4_set_bits(cr4_mask); | |
| cr0 = read_cr0(); | |
| cr0 &= ~(X86_CR0_TS|X86_CR0_EM); /* clear TS and EM */ | |
| if (!boot_cpu_has(X86_FEATURE_FPU)) | |
| cr0 |= X86_CR0_EM; | |
| write_cr0(cr0); | |
| /* Flush out any pending x87 state: */ | |
| #ifdef CONFIG_MATH_EMULATION | |
| if (!boot_cpu_has(X86_FEATURE_FPU)) | |
| fpstate_init_soft(¤t->thread.fpu.state.soft); | |
| else | |
| #endif | |
| asm volatile ("fninit"); | |
| } | |
| /* | |
| * Enable all supported FPU features. Called when a CPU is brought online: | |
| */ | |
| void fpu__init_cpu(void) | |
| { | |
| fpu__init_cpu_generic(); | |
| fpu__init_cpu_xstate(); | |
| } | |
| static bool fpu__probe_without_cpuid(void) | |
| { | |
| unsigned long cr0; | |
| u16 fsw, fcw; | |
| fsw = fcw = 0xffff; | |
| cr0 = read_cr0(); | |
| cr0 &= ~(X86_CR0_TS | X86_CR0_EM); | |
| write_cr0(cr0); | |
| asm volatile("fninit ; fnstsw %0 ; fnstcw %1" : "+m" (fsw), "+m" (fcw)); | |
| pr_info("x86/fpu: Probing for FPU: FSW=0x%04hx FCW=0x%04hx\n", fsw, fcw); | |
| return fsw == 0 && (fcw & 0x103f) == 0x003f; | |
| } | |
| static void fpu__init_system_early_generic(struct cpuinfo_x86 *c) | |
| { | |
| if (!boot_cpu_has(X86_FEATURE_CPUID) && | |
| !test_bit(X86_FEATURE_FPU, (unsigned long *)cpu_caps_cleared)) { | |
| if (fpu__probe_without_cpuid()) | |
| setup_force_cpu_cap(X86_FEATURE_FPU); | |
| else | |
| setup_clear_cpu_cap(X86_FEATURE_FPU); | |
| } | |
| #ifndef CONFIG_MATH_EMULATION | |
| if (!test_cpu_cap(&boot_cpu_data, X86_FEATURE_FPU)) { | |
| pr_emerg("x86/fpu: Giving up, no FPU found and no math emulation present\n"); | |
| for (;;) | |
| asm volatile("hlt"); | |
| } | |
| #endif | |
| } | |
| /* | |
| * Boot time FPU feature detection code: | |
| */ | |
| unsigned int mxcsr_feature_mask __read_mostly = 0xffffffffu; | |
| EXPORT_SYMBOL_GPL(mxcsr_feature_mask); | |
| static void __init fpu__init_system_mxcsr(void) | |
| { | |
| unsigned int mask = 0; | |
| if (boot_cpu_has(X86_FEATURE_FXSR)) { | |
| /* Static because GCC does not get 16-byte stack alignment right: */ | |
| static struct fxregs_state fxregs __initdata; | |
| asm volatile("fxsave %0" : "+m" (fxregs)); | |
| mask = fxregs.mxcsr_mask; | |
| /* | |
| * If zero then use the default features mask, | |
| * which has all features set, except the | |
| * denormals-are-zero feature bit: | |
| */ | |
| if (mask == 0) | |
| mask = 0x0000ffbf; | |
| } | |
| mxcsr_feature_mask &= mask; | |
| } | |
| /* | |
| * Once per bootup FPU initialization sequences that will run on most x86 CPUs: | |
| */ | |
| static void __init fpu__init_system_generic(void) | |
| { | |
| /* | |
| * Set up the legacy init FPU context. (xstate init might overwrite this | |
| * with a more modern format, if the CPU supports it.) | |
| */ | |
| fpstate_init(&init_fpstate); | |
| fpu__init_system_mxcsr(); | |
| } | |
| /* | |
| * Size of the FPU context state. All tasks in the system use the | |
| * same context size, regardless of what portion they use. | |
| * This is inherent to the XSAVE architecture which puts all state | |
| * components into a single, continuous memory block: | |
| */ | |
| unsigned int fpu_kernel_xstate_size; | |
| EXPORT_SYMBOL_GPL(fpu_kernel_xstate_size); | |
| /* Get alignment of the TYPE. */ | |
| #define TYPE_ALIGN(TYPE) offsetof(struct { char x; TYPE test; }, test) | |
| /* | |
| * Enforce that 'MEMBER' is the last field of 'TYPE'. | |
| * | |
| * Align the computed size with alignment of the TYPE, | |
| * because that's how C aligns structs. | |
| */ | |
| #define CHECK_MEMBER_AT_END_OF(TYPE, MEMBER) \ | |
| BUILD_BUG_ON(sizeof(TYPE) != ALIGN(offsetofend(TYPE, MEMBER), \ | |
| TYPE_ALIGN(TYPE))) | |
| /* | |
| * We append the 'struct fpu' to the task_struct: | |
| */ | |
| static void __init fpu__init_task_struct_size(void) | |
| { | |
| int task_size = sizeof(struct task_struct); | |
| /* | |
| * Subtract off the static size of the register state. | |
| * It potentially has a bunch of padding. | |
| */ | |
| task_size -= sizeof(((struct task_struct *)0)->thread.fpu.state); | |
| /* | |
| * Add back the dynamically-calculated register state | |
| * size. | |
| */ | |
| task_size += fpu_kernel_xstate_size; | |
| /* | |
| * We dynamically size 'struct fpu', so we require that | |
| * it be at the end of 'thread_struct' and that | |
| * 'thread_struct' be at the end of 'task_struct'. If | |
| * you hit a compile error here, check the structure to | |
| * see if something got added to the end. | |
| */ | |
| CHECK_MEMBER_AT_END_OF(struct fpu, state); | |
| CHECK_MEMBER_AT_END_OF(struct thread_struct, fpu); | |
| CHECK_MEMBER_AT_END_OF(struct task_struct, thread); | |
| arch_task_struct_size = task_size; | |
| } | |
| /* | |
| * Set up the user and kernel xstate sizes based on the legacy FPU context size. | |
| * | |
| * We set this up first, and later it will be overwritten by | |
| * fpu__init_system_xstate() if the CPU knows about xstates. | |
| */ | |
| static void __init fpu__init_system_xstate_size_legacy(void) | |
| { | |
| static int on_boot_cpu __initdata = 1; | |
| WARN_ON_FPU(!on_boot_cpu); | |
| on_boot_cpu = 0; | |
| /* | |
| * Note that xstate sizes might be overwritten later during | |
| * fpu__init_system_xstate(). | |
| */ | |
| if (!boot_cpu_has(X86_FEATURE_FPU)) { | |
| fpu_kernel_xstate_size = sizeof(struct swregs_state); | |
| } else { | |
| if (boot_cpu_has(X86_FEATURE_FXSR)) | |
| fpu_kernel_xstate_size = | |
| sizeof(struct fxregs_state); | |
| else | |
| fpu_kernel_xstate_size = | |
| sizeof(struct fregs_state); | |
| } | |
| fpu_user_xstate_size = fpu_kernel_xstate_size; | |
| } | |
| /* | |
| * Find supported xfeatures based on cpu features and command-line input. | |
| * This must be called after fpu__init_parse_early_param() is called and | |
| * xfeatures_mask is enumerated. | |
| */ | |
| u64 __init fpu__get_supported_xfeatures_mask(void) | |
| { | |
| return XFEATURE_MASK_USER_SUPPORTED | | |
| XFEATURE_MASK_SUPERVISOR_SUPPORTED; | |
| } | |
| /* Legacy code to initialize eager fpu mode. */ | |
| static void __init fpu__init_system_ctx_switch(void) | |
| { | |
| static bool on_boot_cpu __initdata = 1; | |
| WARN_ON_FPU(!on_boot_cpu); | |
| on_boot_cpu = 0; | |
| } | |
| /* | |
| * Called on the boot CPU once per system bootup, to set up the initial | |
| * FPU state that is later cloned into all processes: | |
| */ | |
| void __init fpu__init_system(struct cpuinfo_x86 *c) | |
| { | |
| fpu__init_system_early_generic(c); | |
| /* | |
| * The FPU has to be operational for some of the | |
| * later FPU init activities: | |
| */ | |
| fpu__init_cpu(); | |
| fpu__init_system_generic(); | |
| fpu__init_system_xstate_size_legacy(); | |
| fpu__init_system_xstate(); | |
| fpu__init_task_struct_size(); | |
| fpu__init_system_ctx_switch(); | |
| } |