| // SPDX-License-Identifier: GPL-2.0+ | |
| /* | |
| * HD44780 Character LCD driver for Linux | |
| * | |
| * Copyright (C) 2000-2008, Willy Tarreau <w@1wt.eu> | |
| * Copyright (C) 2016-2017 Glider bvba | |
| */ | |
| #include <linux/delay.h> | |
| #include <linux/gpio/consumer.h> | |
| #include <linux/module.h> | |
| #include <linux/mod_devicetable.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/property.h> | |
| #include <linux/slab.h> | |
| #include "charlcd.h" | |
| #include "hd44780_common.h" | |
| enum hd44780_pin { | |
| /* Order does matter due to writing to GPIO array subsets! */ | |
| PIN_DATA0, /* Optional */ | |
| PIN_DATA1, /* Optional */ | |
| PIN_DATA2, /* Optional */ | |
| PIN_DATA3, /* Optional */ | |
| PIN_DATA4, | |
| PIN_DATA5, | |
| PIN_DATA6, | |
| PIN_DATA7, | |
| PIN_CTRL_RS, | |
| PIN_CTRL_RW, /* Optional */ | |
| PIN_CTRL_E, | |
| PIN_CTRL_BL, /* Optional */ | |
| PIN_NUM | |
| }; | |
| struct hd44780 { | |
| struct gpio_desc *pins[PIN_NUM]; | |
| }; | |
| static void hd44780_backlight(struct charlcd *lcd, enum charlcd_onoff on) | |
| { | |
| struct hd44780_common *hdc = lcd->drvdata; | |
| struct hd44780 *hd = hdc->hd44780; | |
| if (hd->pins[PIN_CTRL_BL]) | |
| gpiod_set_value_cansleep(hd->pins[PIN_CTRL_BL], on); | |
| } | |
| static void hd44780_strobe_gpio(struct hd44780 *hd) | |
| { | |
| /* Maintain the data during 20 us before the strobe */ | |
| udelay(20); | |
| gpiod_set_value_cansleep(hd->pins[PIN_CTRL_E], 1); | |
| /* Maintain the strobe during 40 us */ | |
| udelay(40); | |
| gpiod_set_value_cansleep(hd->pins[PIN_CTRL_E], 0); | |
| } | |
| /* write to an LCD panel register in 8 bit GPIO mode */ | |
| static void hd44780_write_gpio8(struct hd44780 *hd, u8 val, unsigned int rs) | |
| { | |
| DECLARE_BITMAP(values, 10); /* for DATA[0-7], RS, RW */ | |
| unsigned int n; | |
| values[0] = val; | |
| __assign_bit(8, values, rs); | |
| n = hd->pins[PIN_CTRL_RW] ? 10 : 9; | |
| /* Present the data to the port */ | |
| gpiod_set_array_value_cansleep(n, &hd->pins[PIN_DATA0], NULL, values); | |
| hd44780_strobe_gpio(hd); | |
| } | |
| /* write to an LCD panel register in 4 bit GPIO mode */ | |
| static void hd44780_write_gpio4(struct hd44780 *hd, u8 val, unsigned int rs) | |
| { | |
| DECLARE_BITMAP(values, 6); /* for DATA[4-7], RS, RW */ | |
| unsigned int n; | |
| /* High nibble + RS, RW */ | |
| values[0] = val >> 4; | |
| __assign_bit(4, values, rs); | |
| n = hd->pins[PIN_CTRL_RW] ? 6 : 5; | |
| /* Present the data to the port */ | |
| gpiod_set_array_value_cansleep(n, &hd->pins[PIN_DATA4], NULL, values); | |
| hd44780_strobe_gpio(hd); | |
| /* Low nibble */ | |
| values[0] &= ~0x0fUL; | |
| values[0] |= val & 0x0f; | |
| /* Present the data to the port */ | |
| gpiod_set_array_value_cansleep(n, &hd->pins[PIN_DATA4], NULL, values); | |
| hd44780_strobe_gpio(hd); | |
| } | |
| /* Send a command to the LCD panel in 8 bit GPIO mode */ | |
| static void hd44780_write_cmd_gpio8(struct hd44780_common *hdc, int cmd) | |
| { | |
| struct hd44780 *hd = hdc->hd44780; | |
| hd44780_write_gpio8(hd, cmd, 0); | |
| /* The shortest command takes at least 120 us */ | |
| udelay(120); | |
| } | |
| /* Send data to the LCD panel in 8 bit GPIO mode */ | |
| static void hd44780_write_data_gpio8(struct hd44780_common *hdc, int data) | |
| { | |
| struct hd44780 *hd = hdc->hd44780; | |
| hd44780_write_gpio8(hd, data, 1); | |
| /* The shortest data takes at least 45 us */ | |
| udelay(45); | |
| } | |
| static const struct charlcd_ops hd44780_ops_gpio8 = { | |
| .backlight = hd44780_backlight, | |
| .print = hd44780_common_print, | |
| .gotoxy = hd44780_common_gotoxy, | |
| .home = hd44780_common_home, | |
| .clear_display = hd44780_common_clear_display, | |
| .init_display = hd44780_common_init_display, | |
| .shift_cursor = hd44780_common_shift_cursor, | |
| .shift_display = hd44780_common_shift_display, | |
| .display = hd44780_common_display, | |
| .cursor = hd44780_common_cursor, | |
| .blink = hd44780_common_blink, | |
| .fontsize = hd44780_common_fontsize, | |
| .lines = hd44780_common_lines, | |
| .redefine_char = hd44780_common_redefine_char, | |
| }; | |
| /* Send a command to the LCD panel in 4 bit GPIO mode */ | |
| static void hd44780_write_cmd_gpio4(struct hd44780_common *hdc, int cmd) | |
| { | |
| struct hd44780 *hd = hdc->hd44780; | |
| hd44780_write_gpio4(hd, cmd, 0); | |
| /* The shortest command takes at least 120 us */ | |
| udelay(120); | |
| } | |
| /* Send 4-bits of a command to the LCD panel in raw 4 bit GPIO mode */ | |
| static void hd44780_write_cmd_raw_gpio4(struct hd44780_common *hdc, int cmd) | |
| { | |
| DECLARE_BITMAP(values, 6); /* for DATA[4-7], RS, RW */ | |
| struct hd44780 *hd = hdc->hd44780; | |
| unsigned int n; | |
| /* Command nibble + RS, RW */ | |
| values[0] = cmd & 0x0f; | |
| n = hd->pins[PIN_CTRL_RW] ? 6 : 5; | |
| /* Present the data to the port */ | |
| gpiod_set_array_value_cansleep(n, &hd->pins[PIN_DATA4], NULL, values); | |
| hd44780_strobe_gpio(hd); | |
| } | |
| /* Send data to the LCD panel in 4 bit GPIO mode */ | |
| static void hd44780_write_data_gpio4(struct hd44780_common *hdc, int data) | |
| { | |
| struct hd44780 *hd = hdc->hd44780; | |
| hd44780_write_gpio4(hd, data, 1); | |
| /* The shortest data takes at least 45 us */ | |
| udelay(45); | |
| } | |
| static const struct charlcd_ops hd44780_ops_gpio4 = { | |
| .backlight = hd44780_backlight, | |
| .print = hd44780_common_print, | |
| .gotoxy = hd44780_common_gotoxy, | |
| .home = hd44780_common_home, | |
| .clear_display = hd44780_common_clear_display, | |
| .init_display = hd44780_common_init_display, | |
| .shift_cursor = hd44780_common_shift_cursor, | |
| .shift_display = hd44780_common_shift_display, | |
| .display = hd44780_common_display, | |
| .cursor = hd44780_common_cursor, | |
| .blink = hd44780_common_blink, | |
| .fontsize = hd44780_common_fontsize, | |
| .lines = hd44780_common_lines, | |
| .redefine_char = hd44780_common_redefine_char, | |
| }; | |
| static int hd44780_probe(struct platform_device *pdev) | |
| { | |
| struct device *dev = &pdev->dev; | |
| unsigned int i, base; | |
| struct charlcd *lcd; | |
| struct hd44780_common *hdc; | |
| struct hd44780 *hd; | |
| int ifwidth, ret = -ENOMEM; | |
| /* Required pins */ | |
| ifwidth = gpiod_count(dev, "data"); | |
| if (ifwidth < 0) | |
| return ifwidth; | |
| switch (ifwidth) { | |
| case 4: | |
| base = PIN_DATA4; | |
| break; | |
| case 8: | |
| base = PIN_DATA0; | |
| break; | |
| default: | |
| return -EINVAL; | |
| } | |
| hdc = hd44780_common_alloc(); | |
| if (!hdc) | |
| return -ENOMEM; | |
| lcd = charlcd_alloc(); | |
| if (!lcd) | |
| goto fail1; | |
| hd = kzalloc(sizeof(struct hd44780), GFP_KERNEL); | |
| if (!hd) | |
| goto fail2; | |
| hdc->hd44780 = hd; | |
| lcd->drvdata = hdc; | |
| for (i = 0; i < ifwidth; i++) { | |
| hd->pins[base + i] = devm_gpiod_get_index(dev, "data", i, | |
| GPIOD_OUT_LOW); | |
| if (IS_ERR(hd->pins[base + i])) { | |
| ret = PTR_ERR(hd->pins[base + i]); | |
| goto fail3; | |
| } | |
| } | |
| hd->pins[PIN_CTRL_E] = devm_gpiod_get(dev, "enable", GPIOD_OUT_LOW); | |
| if (IS_ERR(hd->pins[PIN_CTRL_E])) { | |
| ret = PTR_ERR(hd->pins[PIN_CTRL_E]); | |
| goto fail3; | |
| } | |
| hd->pins[PIN_CTRL_RS] = devm_gpiod_get(dev, "rs", GPIOD_OUT_HIGH); | |
| if (IS_ERR(hd->pins[PIN_CTRL_RS])) { | |
| ret = PTR_ERR(hd->pins[PIN_CTRL_RS]); | |
| goto fail3; | |
| } | |
| /* Optional pins */ | |
| hd->pins[PIN_CTRL_RW] = devm_gpiod_get_optional(dev, "rw", | |
| GPIOD_OUT_LOW); | |
| if (IS_ERR(hd->pins[PIN_CTRL_RW])) { | |
| ret = PTR_ERR(hd->pins[PIN_CTRL_RW]); | |
| goto fail3; | |
| } | |
| hd->pins[PIN_CTRL_BL] = devm_gpiod_get_optional(dev, "backlight", | |
| GPIOD_OUT_LOW); | |
| if (IS_ERR(hd->pins[PIN_CTRL_BL])) { | |
| ret = PTR_ERR(hd->pins[PIN_CTRL_BL]); | |
| goto fail3; | |
| } | |
| /* Required properties */ | |
| ret = device_property_read_u32(dev, "display-height-chars", | |
| &lcd->height); | |
| if (ret) | |
| goto fail3; | |
| ret = device_property_read_u32(dev, "display-width-chars", &lcd->width); | |
| if (ret) | |
| goto fail3; | |
| /* | |
| * On displays with more than two rows, the internal buffer width is | |
| * usually equal to the display width | |
| */ | |
| if (lcd->height > 2) | |
| hdc->bwidth = lcd->width; | |
| /* Optional properties */ | |
| device_property_read_u32(dev, "internal-buffer-width", &hdc->bwidth); | |
| hdc->ifwidth = ifwidth; | |
| if (ifwidth == 8) { | |
| lcd->ops = &hd44780_ops_gpio8; | |
| hdc->write_data = hd44780_write_data_gpio8; | |
| hdc->write_cmd = hd44780_write_cmd_gpio8; | |
| } else { | |
| lcd->ops = &hd44780_ops_gpio4; | |
| hdc->write_data = hd44780_write_data_gpio4; | |
| hdc->write_cmd = hd44780_write_cmd_gpio4; | |
| hdc->write_cmd_raw4 = hd44780_write_cmd_raw_gpio4; | |
| } | |
| ret = charlcd_register(lcd); | |
| if (ret) | |
| goto fail3; | |
| platform_set_drvdata(pdev, lcd); | |
| return 0; | |
| fail3: | |
| kfree(hd); | |
| fail2: | |
| kfree(lcd); | |
| fail1: | |
| kfree(hdc); | |
| return ret; | |
| } | |
| static int hd44780_remove(struct platform_device *pdev) | |
| { | |
| struct charlcd *lcd = platform_get_drvdata(pdev); | |
| kfree(lcd->drvdata); | |
| charlcd_unregister(lcd); | |
| kfree(lcd); | |
| return 0; | |
| } | |
| static const struct of_device_id hd44780_of_match[] = { | |
| { .compatible = "hit,hd44780" }, | |
| { /* sentinel */ } | |
| }; | |
| MODULE_DEVICE_TABLE(of, hd44780_of_match); | |
| static struct platform_driver hd44780_driver = { | |
| .probe = hd44780_probe, | |
| .remove = hd44780_remove, | |
| .driver = { | |
| .name = "hd44780", | |
| .of_match_table = hd44780_of_match, | |
| }, | |
| }; | |
| module_platform_driver(hd44780_driver); | |
| MODULE_DESCRIPTION("HD44780 Character LCD driver"); | |
| MODULE_AUTHOR("Geert Uytterhoeven <geert@linux-m68k.org>"); | |
| MODULE_LICENSE("GPL"); |