| /* | |
| * Broadcom specific AMBA | |
| * Broadcom MIPS32 74K core driver | |
| * | |
| * Copyright 2009, Broadcom Corporation | |
| * Copyright 2006, 2007, Michael Buesch <mb@bu3sch.de> | |
| * Copyright 2010, Bernhard Loos <bernhardloos@googlemail.com> | |
| * Copyright 2011, Hauke Mehrtens <hauke@hauke-m.de> | |
| * | |
| * Licensed under the GNU/GPL. See COPYING for details. | |
| */ | |
| #include "bcma_private.h" | |
| #include <linux/bcma/bcma.h> | |
| #include <linux/serial.h> | |
| #include <linux/serial_core.h> | |
| #include <linux/serial_reg.h> | |
| #include <linux/time.h> | |
| #ifdef CONFIG_BCM47XX | |
| #include <linux/bcm47xx_nvram.h> | |
| #endif | |
| enum bcma_boot_dev { | |
| BCMA_BOOT_DEV_UNK = 0, | |
| BCMA_BOOT_DEV_ROM, | |
| BCMA_BOOT_DEV_PARALLEL, | |
| BCMA_BOOT_DEV_SERIAL, | |
| BCMA_BOOT_DEV_NAND, | |
| }; | |
| /* The 47162a0 hangs when reading MIPS DMP registers registers */ | |
| static inline bool bcma_core_mips_bcm47162a0_quirk(struct bcma_device *dev) | |
| { | |
| return dev->bus->chipinfo.id == BCMA_CHIP_ID_BCM47162 && | |
| dev->bus->chipinfo.rev == 0 && dev->id.id == BCMA_CORE_MIPS_74K; | |
| } | |
| /* The 5357b0 hangs when reading USB20H DMP registers */ | |
| static inline bool bcma_core_mips_bcm5357b0_quirk(struct bcma_device *dev) | |
| { | |
| return (dev->bus->chipinfo.id == BCMA_CHIP_ID_BCM5357 || | |
| dev->bus->chipinfo.id == BCMA_CHIP_ID_BCM4749) && | |
| dev->bus->chipinfo.pkg == 11 && | |
| dev->id.id == BCMA_CORE_USB20_HOST; | |
| } | |
| static inline u32 mips_read32(struct bcma_drv_mips *mcore, | |
| u16 offset) | |
| { | |
| return bcma_read32(mcore->core, offset); | |
| } | |
| static inline void mips_write32(struct bcma_drv_mips *mcore, | |
| u16 offset, | |
| u32 value) | |
| { | |
| bcma_write32(mcore->core, offset, value); | |
| } | |
| static u32 bcma_core_mips_irqflag(struct bcma_device *dev) | |
| { | |
| u32 flag; | |
| if (bcma_core_mips_bcm47162a0_quirk(dev)) | |
| return dev->core_index; | |
| if (bcma_core_mips_bcm5357b0_quirk(dev)) | |
| return dev->core_index; | |
| flag = bcma_aread32(dev, BCMA_MIPS_OOBSELOUTA30); | |
| if (flag) | |
| return flag & 0x1F; | |
| else | |
| return 0x3f; | |
| } | |
| /* Get the MIPS IRQ assignment for a specified device. | |
| * If unassigned, 0 is returned. | |
| * If disabled, 5 is returned. | |
| * If not supported, 6 is returned. | |
| */ | |
| unsigned int bcma_core_mips_irq(struct bcma_device *dev) | |
| { | |
| struct bcma_device *mdev = dev->bus->drv_mips.core; | |
| u32 irqflag; | |
| unsigned int irq; | |
| irqflag = bcma_core_mips_irqflag(dev); | |
| if (irqflag == 0x3f) | |
| return 6; | |
| for (irq = 0; irq <= 4; irq++) | |
| if (bcma_read32(mdev, BCMA_MIPS_MIPS74K_INTMASK(irq)) & | |
| (1 << irqflag)) | |
| return irq; | |
| return 5; | |
| } | |
| static void bcma_core_mips_set_irq(struct bcma_device *dev, unsigned int irq) | |
| { | |
| unsigned int oldirq = bcma_core_mips_irq(dev); | |
| struct bcma_bus *bus = dev->bus; | |
| struct bcma_device *mdev = bus->drv_mips.core; | |
| u32 irqflag; | |
| irqflag = bcma_core_mips_irqflag(dev); | |
| BUG_ON(oldirq == 6); | |
| dev->irq = irq + 2; | |
| /* clear the old irq */ | |
| if (oldirq == 0) | |
| bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0), | |
| bcma_read32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0)) & | |
| ~(1 << irqflag)); | |
| else if (oldirq != 5) | |
| bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(oldirq), 0); | |
| /* assign the new one */ | |
| if (irq == 0) { | |
| bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0), | |
| bcma_read32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0)) | | |
| (1 << irqflag)); | |
| } else { | |
| u32 irqinitmask = bcma_read32(mdev, | |
| BCMA_MIPS_MIPS74K_INTMASK(irq)); | |
| if (irqinitmask) { | |
| struct bcma_device *core; | |
| /* backplane irq line is in use, find out who uses | |
| * it and set user to irq 0 | |
| */ | |
| list_for_each_entry(core, &bus->cores, list) { | |
| if ((1 << bcma_core_mips_irqflag(core)) == | |
| irqinitmask) { | |
| bcma_core_mips_set_irq(core, 0); | |
| break; | |
| } | |
| } | |
| } | |
| bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(irq), | |
| 1 << irqflag); | |
| } | |
| bcma_debug(bus, "set_irq: core 0x%04x, irq %d => %d\n", | |
| dev->id.id, oldirq <= 4 ? oldirq + 2 : 0, irq + 2); | |
| } | |
| static void bcma_core_mips_set_irq_name(struct bcma_bus *bus, unsigned int irq, | |
| u16 coreid, u8 unit) | |
| { | |
| struct bcma_device *core; | |
| core = bcma_find_core_unit(bus, coreid, unit); | |
| if (!core) { | |
| bcma_warn(bus, | |
| "Can not find core (id: 0x%x, unit %i) for IRQ configuration.\n", | |
| coreid, unit); | |
| return; | |
| } | |
| bcma_core_mips_set_irq(core, irq); | |
| } | |
| static void bcma_core_mips_print_irq(struct bcma_device *dev, unsigned int irq) | |
| { | |
| int i; | |
| static const char *irq_name[] = {"2(S)", "3", "4", "5", "6", "D", "I"}; | |
| char interrupts[25]; | |
| char *ints = interrupts; | |
| for (i = 0; i < ARRAY_SIZE(irq_name); i++) | |
| ints += sprintf(ints, " %s%c", | |
| irq_name[i], i == irq ? '*' : ' '); | |
| bcma_debug(dev->bus, "core 0x%04x, irq:%s\n", dev->id.id, interrupts); | |
| } | |
| static void bcma_core_mips_dump_irq(struct bcma_bus *bus) | |
| { | |
| struct bcma_device *core; | |
| list_for_each_entry(core, &bus->cores, list) { | |
| bcma_core_mips_print_irq(core, bcma_core_mips_irq(core)); | |
| } | |
| } | |
| u32 bcma_cpu_clock(struct bcma_drv_mips *mcore) | |
| { | |
| struct bcma_bus *bus = mcore->core->bus; | |
| if (bus->drv_cc.capabilities & BCMA_CC_CAP_PMU) | |
| return bcma_pmu_get_cpu_clock(&bus->drv_cc); | |
| bcma_err(bus, "No PMU available, need this to get the cpu clock\n"); | |
| return 0; | |
| } | |
| EXPORT_SYMBOL(bcma_cpu_clock); | |
| static enum bcma_boot_dev bcma_boot_dev(struct bcma_bus *bus) | |
| { | |
| struct bcma_drv_cc *cc = &bus->drv_cc; | |
| u8 cc_rev = cc->core->id.rev; | |
| if (cc_rev == 42) { | |
| struct bcma_device *core; | |
| core = bcma_find_core(bus, BCMA_CORE_NS_ROM); | |
| if (core) { | |
| switch (bcma_aread32(core, BCMA_IOST) & | |
| BCMA_NS_ROM_IOST_BOOT_DEV_MASK) { | |
| case BCMA_NS_ROM_IOST_BOOT_DEV_NOR: | |
| return BCMA_BOOT_DEV_SERIAL; | |
| case BCMA_NS_ROM_IOST_BOOT_DEV_NAND: | |
| return BCMA_BOOT_DEV_NAND; | |
| case BCMA_NS_ROM_IOST_BOOT_DEV_ROM: | |
| default: | |
| return BCMA_BOOT_DEV_ROM; | |
| } | |
| } | |
| } else { | |
| if (cc_rev == 38) { | |
| if (cc->status & BCMA_CC_CHIPST_5357_NAND_BOOT) | |
| return BCMA_BOOT_DEV_NAND; | |
| else if (cc->status & BIT(5)) | |
| return BCMA_BOOT_DEV_ROM; | |
| } | |
| if ((cc->capabilities & BCMA_CC_CAP_FLASHT) == | |
| BCMA_CC_FLASHT_PARA) | |
| return BCMA_BOOT_DEV_PARALLEL; | |
| else | |
| return BCMA_BOOT_DEV_SERIAL; | |
| } | |
| return BCMA_BOOT_DEV_SERIAL; | |
| } | |
| static void bcma_core_mips_nvram_init(struct bcma_drv_mips *mcore) | |
| { | |
| struct bcma_bus *bus = mcore->core->bus; | |
| enum bcma_boot_dev boot_dev; | |
| /* Determine flash type this SoC boots from */ | |
| boot_dev = bcma_boot_dev(bus); | |
| switch (boot_dev) { | |
| case BCMA_BOOT_DEV_PARALLEL: | |
| case BCMA_BOOT_DEV_SERIAL: | |
| #ifdef CONFIG_BCM47XX | |
| bcm47xx_nvram_init_from_mem(BCMA_SOC_FLASH2, | |
| BCMA_SOC_FLASH2_SZ); | |
| #endif | |
| break; | |
| case BCMA_BOOT_DEV_NAND: | |
| #ifdef CONFIG_BCM47XX | |
| bcm47xx_nvram_init_from_mem(BCMA_SOC_FLASH1, | |
| BCMA_SOC_FLASH1_SZ); | |
| #endif | |
| break; | |
| default: | |
| break; | |
| } | |
| } | |
| void bcma_core_mips_early_init(struct bcma_drv_mips *mcore) | |
| { | |
| struct bcma_bus *bus = mcore->core->bus; | |
| if (mcore->early_setup_done) | |
| return; | |
| bcma_chipco_serial_init(&bus->drv_cc); | |
| bcma_core_mips_nvram_init(mcore); | |
| mcore->early_setup_done = true; | |
| } | |
| static void bcma_fix_i2s_irqflag(struct bcma_bus *bus) | |
| { | |
| struct bcma_device *cpu, *pcie, *i2s; | |
| /* Fixup the interrupts in 4716/4748 for i2s core (2010 Broadcom SDK) | |
| * (IRQ flags > 7 are ignored when setting the interrupt masks) | |
| */ | |
| if (bus->chipinfo.id != BCMA_CHIP_ID_BCM4716 && | |
| bus->chipinfo.id != BCMA_CHIP_ID_BCM4748) | |
| return; | |
| cpu = bcma_find_core(bus, BCMA_CORE_MIPS_74K); | |
| pcie = bcma_find_core(bus, BCMA_CORE_PCIE); | |
| i2s = bcma_find_core(bus, BCMA_CORE_I2S); | |
| if (cpu && pcie && i2s && | |
| bcma_aread32(cpu, BCMA_MIPS_OOBSELINA74) == 0x08060504 && | |
| bcma_aread32(pcie, BCMA_MIPS_OOBSELINA74) == 0x08060504 && | |
| bcma_aread32(i2s, BCMA_MIPS_OOBSELOUTA30) == 0x88) { | |
| bcma_awrite32(cpu, BCMA_MIPS_OOBSELINA74, 0x07060504); | |
| bcma_awrite32(pcie, BCMA_MIPS_OOBSELINA74, 0x07060504); | |
| bcma_awrite32(i2s, BCMA_MIPS_OOBSELOUTA30, 0x87); | |
| bcma_debug(bus, | |
| "Moved i2s interrupt to oob line 7 instead of 8\n"); | |
| } | |
| } | |
| void bcma_core_mips_init(struct bcma_drv_mips *mcore) | |
| { | |
| struct bcma_bus *bus; | |
| struct bcma_device *core; | |
| bus = mcore->core->bus; | |
| if (mcore->setup_done) | |
| return; | |
| bcma_debug(bus, "Initializing MIPS core...\n"); | |
| bcma_core_mips_early_init(mcore); | |
| bcma_fix_i2s_irqflag(bus); | |
| switch (bus->chipinfo.id) { | |
| case BCMA_CHIP_ID_BCM4716: | |
| case BCMA_CHIP_ID_BCM4748: | |
| bcma_core_mips_set_irq_name(bus, 1, BCMA_CORE_80211, 0); | |
| bcma_core_mips_set_irq_name(bus, 2, BCMA_CORE_MAC_GBIT, 0); | |
| bcma_core_mips_set_irq_name(bus, 3, BCMA_CORE_USB20_HOST, 0); | |
| bcma_core_mips_set_irq_name(bus, 4, BCMA_CORE_PCIE, 0); | |
| bcma_core_mips_set_irq_name(bus, 0, BCMA_CORE_CHIPCOMMON, 0); | |
| bcma_core_mips_set_irq_name(bus, 0, BCMA_CORE_I2S, 0); | |
| break; | |
| case BCMA_CHIP_ID_BCM5356: | |
| case BCMA_CHIP_ID_BCM47162: | |
| case BCMA_CHIP_ID_BCM53572: | |
| bcma_core_mips_set_irq_name(bus, 1, BCMA_CORE_80211, 0); | |
| bcma_core_mips_set_irq_name(bus, 2, BCMA_CORE_MAC_GBIT, 0); | |
| bcma_core_mips_set_irq_name(bus, 0, BCMA_CORE_CHIPCOMMON, 0); | |
| break; | |
| case BCMA_CHIP_ID_BCM5357: | |
| case BCMA_CHIP_ID_BCM4749: | |
| bcma_core_mips_set_irq_name(bus, 1, BCMA_CORE_80211, 0); | |
| bcma_core_mips_set_irq_name(bus, 2, BCMA_CORE_MAC_GBIT, 0); | |
| bcma_core_mips_set_irq_name(bus, 3, BCMA_CORE_USB20_HOST, 0); | |
| bcma_core_mips_set_irq_name(bus, 0, BCMA_CORE_CHIPCOMMON, 0); | |
| bcma_core_mips_set_irq_name(bus, 0, BCMA_CORE_I2S, 0); | |
| break; | |
| case BCMA_CHIP_ID_BCM4706: | |
| bcma_core_mips_set_irq_name(bus, 1, BCMA_CORE_PCIE, 0); | |
| bcma_core_mips_set_irq_name(bus, 2, BCMA_CORE_4706_MAC_GBIT, | |
| 0); | |
| bcma_core_mips_set_irq_name(bus, 3, BCMA_CORE_PCIE, 1); | |
| bcma_core_mips_set_irq_name(bus, 4, BCMA_CORE_USB20_HOST, 0); | |
| bcma_core_mips_set_irq_name(bus, 0, BCMA_CORE_4706_CHIPCOMMON, | |
| 0); | |
| break; | |
| default: | |
| list_for_each_entry(core, &bus->cores, list) { | |
| core->irq = bcma_core_irq(core, 0); | |
| } | |
| bcma_err(bus, | |
| "Unknown device (0x%x) found, can not configure IRQs\n", | |
| bus->chipinfo.id); | |
| } | |
| bcma_debug(bus, "IRQ reconfiguration done\n"); | |
| bcma_core_mips_dump_irq(bus); | |
| mcore->setup_done = true; | |
| } |