| /* | |
| * OMAP clkctrl clock support | |
| * | |
| * Copyright (C) 2017 Texas Instruments, Inc. | |
| * | |
| * Tero Kristo <t-kristo@ti.com> | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License version 2 as | |
| * published by the Free Software Foundation. | |
| * | |
| * This program is distributed "as is" WITHOUT ANY WARRANTY of any | |
| * kind, whether express or implied; without even the implied warranty | |
| * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| */ | |
| #include <linux/clk-provider.h> | |
| #include <linux/slab.h> | |
| #include <linux/of.h> | |
| #include <linux/of_address.h> | |
| #include <linux/clk/ti.h> | |
| #include <linux/delay.h> | |
| #include <linux/timekeeping.h> | |
| #include "clock.h" | |
| #define NO_IDLEST 0 | |
| #define OMAP4_MODULEMODE_MASK 0x3 | |
| #define MODULEMODE_HWCTRL 0x1 | |
| #define MODULEMODE_SWCTRL 0x2 | |
| #define OMAP4_IDLEST_MASK (0x3 << 16) | |
| #define OMAP4_IDLEST_SHIFT 16 | |
| #define OMAP4_STBYST_MASK BIT(18) | |
| #define OMAP4_STBYST_SHIFT 18 | |
| #define CLKCTRL_IDLEST_FUNCTIONAL 0x0 | |
| #define CLKCTRL_IDLEST_INTERFACE_IDLE 0x2 | |
| #define CLKCTRL_IDLEST_DISABLED 0x3 | |
| /* These timeouts are in us */ | |
| #define OMAP4_MAX_MODULE_READY_TIME 2000 | |
| #define OMAP4_MAX_MODULE_DISABLE_TIME 5000 | |
| static bool _early_timeout = true; | |
| struct omap_clkctrl_provider { | |
| void __iomem *base; | |
| struct list_head clocks; | |
| char *clkdm_name; | |
| }; | |
| struct omap_clkctrl_clk { | |
| struct clk_hw *clk; | |
| u16 reg_offset; | |
| int bit_offset; | |
| struct list_head node; | |
| }; | |
| union omap4_timeout { | |
| u32 cycles; | |
| ktime_t start; | |
| }; | |
| static const struct omap_clkctrl_data default_clkctrl_data[] __initconst = { | |
| { 0 }, | |
| }; | |
| static u32 _omap4_idlest(u32 val) | |
| { | |
| val &= OMAP4_IDLEST_MASK; | |
| val >>= OMAP4_IDLEST_SHIFT; | |
| return val; | |
| } | |
| static bool _omap4_is_idle(u32 val) | |
| { | |
| val = _omap4_idlest(val); | |
| return val == CLKCTRL_IDLEST_DISABLED; | |
| } | |
| static bool _omap4_is_ready(u32 val) | |
| { | |
| val = _omap4_idlest(val); | |
| return val == CLKCTRL_IDLEST_FUNCTIONAL || | |
| val == CLKCTRL_IDLEST_INTERFACE_IDLE; | |
| } | |
| static bool _omap4_is_timeout(union omap4_timeout *time, u32 timeout) | |
| { | |
| /* | |
| * There are two special cases where ktime_to_ns() can't be | |
| * used to track the timeouts. First one is during early boot | |
| * when the timers haven't been initialized yet. The second | |
| * one is during suspend-resume cycle while timekeeping is | |
| * being suspended / resumed. Clocksource for the system | |
| * can be from a timer that requires pm_runtime access, which | |
| * will eventually bring us here with timekeeping_suspended, | |
| * during both suspend entry and resume paths. This happens | |
| * at least on am43xx platform. Account for flakeyness | |
| * with udelay() by multiplying the timeout value by 2. | |
| */ | |
| if (unlikely(_early_timeout || timekeeping_suspended)) { | |
| if (time->cycles++ < timeout) { | |
| udelay(1 * 2); | |
| return false; | |
| } | |
| } else { | |
| if (!ktime_to_ns(time->start)) { | |
| time->start = ktime_get(); | |
| return false; | |
| } | |
| if (ktime_us_delta(ktime_get(), time->start) < timeout) { | |
| cpu_relax(); | |
| return false; | |
| } | |
| } | |
| return true; | |
| } | |
| static int __init _omap4_disable_early_timeout(void) | |
| { | |
| _early_timeout = false; | |
| return 0; | |
| } | |
| arch_initcall(_omap4_disable_early_timeout); | |
| static int _omap4_clkctrl_clk_enable(struct clk_hw *hw) | |
| { | |
| struct clk_hw_omap *clk = to_clk_hw_omap(hw); | |
| u32 val; | |
| int ret; | |
| union omap4_timeout timeout = { 0 }; | |
| if (clk->clkdm) { | |
| ret = ti_clk_ll_ops->clkdm_clk_enable(clk->clkdm, hw->clk); | |
| if (ret) { | |
| WARN(1, | |
| "%s: could not enable %s's clockdomain %s: %d\n", | |
| __func__, clk_hw_get_name(hw), | |
| clk->clkdm_name, ret); | |
| return ret; | |
| } | |
| } | |
| if (!clk->enable_bit) | |
| return 0; | |
| val = ti_clk_ll_ops->clk_readl(&clk->enable_reg); | |
| val &= ~OMAP4_MODULEMODE_MASK; | |
| val |= clk->enable_bit; | |
| ti_clk_ll_ops->clk_writel(val, &clk->enable_reg); | |
| if (test_bit(NO_IDLEST, &clk->flags)) | |
| return 0; | |
| /* Wait until module is enabled */ | |
| while (!_omap4_is_ready(ti_clk_ll_ops->clk_readl(&clk->enable_reg))) { | |
| if (_omap4_is_timeout(&timeout, OMAP4_MAX_MODULE_READY_TIME)) { | |
| pr_err("%s: failed to enable\n", clk_hw_get_name(hw)); | |
| return -EBUSY; | |
| } | |
| } | |
| return 0; | |
| } | |
| static void _omap4_clkctrl_clk_disable(struct clk_hw *hw) | |
| { | |
| struct clk_hw_omap *clk = to_clk_hw_omap(hw); | |
| u32 val; | |
| union omap4_timeout timeout = { 0 }; | |
| if (!clk->enable_bit) | |
| goto exit; | |
| val = ti_clk_ll_ops->clk_readl(&clk->enable_reg); | |
| val &= ~OMAP4_MODULEMODE_MASK; | |
| ti_clk_ll_ops->clk_writel(val, &clk->enable_reg); | |
| if (test_bit(NO_IDLEST, &clk->flags)) | |
| goto exit; | |
| /* Wait until module is disabled */ | |
| while (!_omap4_is_idle(ti_clk_ll_ops->clk_readl(&clk->enable_reg))) { | |
| if (_omap4_is_timeout(&timeout, | |
| OMAP4_MAX_MODULE_DISABLE_TIME)) { | |
| pr_err("%s: failed to disable\n", clk_hw_get_name(hw)); | |
| break; | |
| } | |
| } | |
| exit: | |
| if (clk->clkdm) | |
| ti_clk_ll_ops->clkdm_clk_disable(clk->clkdm, hw->clk); | |
| } | |
| static int _omap4_clkctrl_clk_is_enabled(struct clk_hw *hw) | |
| { | |
| struct clk_hw_omap *clk = to_clk_hw_omap(hw); | |
| u32 val; | |
| val = ti_clk_ll_ops->clk_readl(&clk->enable_reg); | |
| if (val & clk->enable_bit) | |
| return 1; | |
| return 0; | |
| } | |
| static const struct clk_ops omap4_clkctrl_clk_ops = { | |
| .enable = _omap4_clkctrl_clk_enable, | |
| .disable = _omap4_clkctrl_clk_disable, | |
| .is_enabled = _omap4_clkctrl_clk_is_enabled, | |
| .init = omap2_init_clk_clkdm, | |
| }; | |
| static struct clk_hw *_ti_omap4_clkctrl_xlate(struct of_phandle_args *clkspec, | |
| void *data) | |
| { | |
| struct omap_clkctrl_provider *provider = data; | |
| struct omap_clkctrl_clk *entry; | |
| bool found = false; | |
| if (clkspec->args_count != 2) | |
| return ERR_PTR(-EINVAL); | |
| pr_debug("%s: looking for %x:%x\n", __func__, | |
| clkspec->args[0], clkspec->args[1]); | |
| list_for_each_entry(entry, &provider->clocks, node) { | |
| if (entry->reg_offset == clkspec->args[0] && | |
| entry->bit_offset == clkspec->args[1]) { | |
| found = true; | |
| break; | |
| } | |
| } | |
| if (!found) | |
| return ERR_PTR(-EINVAL); | |
| return entry->clk; | |
| } | |
| /* Get clkctrl clock base name based on clkctrl_name or dts node */ | |
| static const char * __init clkctrl_get_clock_name(struct device_node *np, | |
| const char *clkctrl_name, | |
| int offset, int index, | |
| bool legacy_naming) | |
| { | |
| char *clock_name; | |
| /* l4per-clkctrl:1234:0 style naming based on clkctrl_name */ | |
| if (clkctrl_name && !legacy_naming) { | |
| clock_name = kasprintf(GFP_KERNEL, "%s-clkctrl:%04x:%d", | |
| clkctrl_name, offset, index); | |
| strreplace(clock_name, '_', '-'); | |
| return clock_name; | |
| } | |
| /* l4per:1234:0 old style naming based on clkctrl_name */ | |
| if (clkctrl_name) | |
| return kasprintf(GFP_KERNEL, "%s_cm:clk:%04x:%d", | |
| clkctrl_name, offset, index); | |
| /* l4per_cm:1234:0 old style naming based on parent node name */ | |
| if (legacy_naming) | |
| return kasprintf(GFP_KERNEL, "%pOFn:clk:%04x:%d", | |
| np->parent, offset, index); | |
| /* l4per-clkctrl:1234:0 style naming based on node name */ | |
| return kasprintf(GFP_KERNEL, "%pOFn:%04x:%d", np, offset, index); | |
| } | |
| static int __init | |
| _ti_clkctrl_clk_register(struct omap_clkctrl_provider *provider, | |
| struct device_node *node, struct clk_hw *clk_hw, | |
| u16 offset, u8 bit, const char * const *parents, | |
| int num_parents, const struct clk_ops *ops, | |
| const char *clkctrl_name) | |
| { | |
| struct clk_init_data init = { NULL }; | |
| struct clk *clk; | |
| struct omap_clkctrl_clk *clkctrl_clk; | |
| int ret = 0; | |
| init.name = clkctrl_get_clock_name(node, clkctrl_name, offset, bit, | |
| ti_clk_get_features()->flags & | |
| TI_CLK_CLKCTRL_COMPAT); | |
| clkctrl_clk = kzalloc(sizeof(*clkctrl_clk), GFP_KERNEL); | |
| if (!init.name || !clkctrl_clk) { | |
| ret = -ENOMEM; | |
| goto cleanup; | |
| } | |
| clk_hw->init = &init; | |
| init.parent_names = parents; | |
| init.num_parents = num_parents; | |
| init.ops = ops; | |
| init.flags = 0; | |
| clk = ti_clk_register(NULL, clk_hw, init.name); | |
| if (IS_ERR_OR_NULL(clk)) { | |
| ret = -EINVAL; | |
| goto cleanup; | |
| } | |
| clkctrl_clk->reg_offset = offset; | |
| clkctrl_clk->bit_offset = bit; | |
| clkctrl_clk->clk = clk_hw; | |
| list_add(&clkctrl_clk->node, &provider->clocks); | |
| return 0; | |
| cleanup: | |
| kfree(init.name); | |
| kfree(clkctrl_clk); | |
| return ret; | |
| } | |
| static void __init | |
| _ti_clkctrl_setup_gate(struct omap_clkctrl_provider *provider, | |
| struct device_node *node, u16 offset, | |
| const struct omap_clkctrl_bit_data *data, | |
| void __iomem *reg, const char *clkctrl_name) | |
| { | |
| struct clk_hw_omap *clk_hw; | |
| clk_hw = kzalloc(sizeof(*clk_hw), GFP_KERNEL); | |
| if (!clk_hw) | |
| return; | |
| clk_hw->enable_bit = data->bit; | |
| clk_hw->enable_reg.ptr = reg; | |
| if (_ti_clkctrl_clk_register(provider, node, &clk_hw->hw, offset, | |
| data->bit, data->parents, 1, | |
| &omap_gate_clk_ops, clkctrl_name)) | |
| kfree(clk_hw); | |
| } | |
| static void __init | |
| _ti_clkctrl_setup_mux(struct omap_clkctrl_provider *provider, | |
| struct device_node *node, u16 offset, | |
| const struct omap_clkctrl_bit_data *data, | |
| void __iomem *reg, const char *clkctrl_name) | |
| { | |
| struct clk_omap_mux *mux; | |
| int num_parents = 0; | |
| const char * const *pname; | |
| mux = kzalloc(sizeof(*mux), GFP_KERNEL); | |
| if (!mux) | |
| return; | |
| pname = data->parents; | |
| while (*pname) { | |
| num_parents++; | |
| pname++; | |
| } | |
| mux->mask = num_parents; | |
| if (!(mux->flags & CLK_MUX_INDEX_ONE)) | |
| mux->mask--; | |
| mux->mask = (1 << fls(mux->mask)) - 1; | |
| mux->shift = data->bit; | |
| mux->reg.ptr = reg; | |
| if (_ti_clkctrl_clk_register(provider, node, &mux->hw, offset, | |
| data->bit, data->parents, num_parents, | |
| &ti_clk_mux_ops, clkctrl_name)) | |
| kfree(mux); | |
| } | |
| static void __init | |
| _ti_clkctrl_setup_div(struct omap_clkctrl_provider *provider, | |
| struct device_node *node, u16 offset, | |
| const struct omap_clkctrl_bit_data *data, | |
| void __iomem *reg, const char *clkctrl_name) | |
| { | |
| struct clk_omap_divider *div; | |
| const struct omap_clkctrl_div_data *div_data = data->data; | |
| u8 div_flags = 0; | |
| div = kzalloc(sizeof(*div), GFP_KERNEL); | |
| if (!div) | |
| return; | |
| div->reg.ptr = reg; | |
| div->shift = data->bit; | |
| div->flags = div_data->flags; | |
| if (div->flags & CLK_DIVIDER_POWER_OF_TWO) | |
| div_flags |= CLKF_INDEX_POWER_OF_TWO; | |
| if (ti_clk_parse_divider_data((int *)div_data->dividers, 0, | |
| div_data->max_div, div_flags, | |
| div)) { | |
| pr_err("%s: Data parsing for %pOF:%04x:%d failed\n", __func__, | |
| node, offset, data->bit); | |
| kfree(div); | |
| return; | |
| } | |
| if (_ti_clkctrl_clk_register(provider, node, &div->hw, offset, | |
| data->bit, data->parents, 1, | |
| &ti_clk_divider_ops, clkctrl_name)) | |
| kfree(div); | |
| } | |
| static void __init | |
| _ti_clkctrl_setup_subclks(struct omap_clkctrl_provider *provider, | |
| struct device_node *node, | |
| const struct omap_clkctrl_reg_data *data, | |
| void __iomem *reg, const char *clkctrl_name) | |
| { | |
| const struct omap_clkctrl_bit_data *bits = data->bit_data; | |
| if (!bits) | |
| return; | |
| while (bits->bit) { | |
| switch (bits->type) { | |
| case TI_CLK_GATE: | |
| _ti_clkctrl_setup_gate(provider, node, data->offset, | |
| bits, reg, clkctrl_name); | |
| break; | |
| case TI_CLK_DIVIDER: | |
| _ti_clkctrl_setup_div(provider, node, data->offset, | |
| bits, reg, clkctrl_name); | |
| break; | |
| case TI_CLK_MUX: | |
| _ti_clkctrl_setup_mux(provider, node, data->offset, | |
| bits, reg, clkctrl_name); | |
| break; | |
| default: | |
| pr_err("%s: bad subclk type: %d\n", __func__, | |
| bits->type); | |
| return; | |
| } | |
| bits++; | |
| } | |
| } | |
| static void __init _clkctrl_add_provider(void *data, | |
| struct device_node *np) | |
| { | |
| of_clk_add_hw_provider(np, _ti_omap4_clkctrl_xlate, data); | |
| } | |
| /* Get clock name based on compatible string for clkctrl */ | |
| static char * __init clkctrl_get_name(struct device_node *np) | |
| { | |
| struct property *prop; | |
| const int prefix_len = 11; | |
| const char *compat; | |
| char *name; | |
| of_property_for_each_string(np, "compatible", prop, compat) { | |
| if (!strncmp("ti,clkctrl-", compat, prefix_len)) { | |
| /* Two letter minimum name length for l3, l4 etc */ | |
| if (strnlen(compat + prefix_len, 16) < 2) | |
| continue; | |
| name = kasprintf(GFP_KERNEL, "%s", compat + prefix_len); | |
| if (!name) | |
| continue; | |
| strreplace(name, '-', '_'); | |
| return name; | |
| } | |
| } | |
| return NULL; | |
| } | |
| static void __init _ti_omap4_clkctrl_setup(struct device_node *node) | |
| { | |
| struct omap_clkctrl_provider *provider; | |
| const struct omap_clkctrl_data *data = default_clkctrl_data; | |
| const struct omap_clkctrl_reg_data *reg_data; | |
| struct clk_init_data init = { NULL }; | |
| struct clk_hw_omap *hw; | |
| struct clk *clk; | |
| struct omap_clkctrl_clk *clkctrl_clk = NULL; | |
| const __be32 *addrp; | |
| bool legacy_naming; | |
| char *clkctrl_name; | |
| u32 addr; | |
| int ret; | |
| char *c; | |
| u16 soc_mask = 0; | |
| if (!(ti_clk_get_features()->flags & TI_CLK_CLKCTRL_COMPAT) && | |
| of_node_name_eq(node, "clk")) | |
| ti_clk_features.flags |= TI_CLK_CLKCTRL_COMPAT; | |
| addrp = of_get_address(node, 0, NULL, NULL); | |
| addr = (u32)of_translate_address(node, addrp); | |
| #ifdef CONFIG_ARCH_OMAP4 | |
| if (of_machine_is_compatible("ti,omap4")) | |
| data = omap4_clkctrl_data; | |
| #endif | |
| #ifdef CONFIG_SOC_OMAP5 | |
| if (of_machine_is_compatible("ti,omap5")) | |
| data = omap5_clkctrl_data; | |
| #endif | |
| #ifdef CONFIG_SOC_DRA7XX | |
| if (of_machine_is_compatible("ti,dra7")) { | |
| if (ti_clk_get_features()->flags & TI_CLK_CLKCTRL_COMPAT) | |
| data = dra7_clkctrl_compat_data; | |
| else | |
| data = dra7_clkctrl_data; | |
| } | |
| if (of_machine_is_compatible("ti,dra72")) | |
| soc_mask = CLKF_SOC_DRA72; | |
| if (of_machine_is_compatible("ti,dra74")) | |
| soc_mask = CLKF_SOC_DRA74; | |
| if (of_machine_is_compatible("ti,dra76")) | |
| soc_mask = CLKF_SOC_DRA76; | |
| #endif | |
| #ifdef CONFIG_SOC_AM33XX | |
| if (of_machine_is_compatible("ti,am33xx")) { | |
| if (ti_clk_get_features()->flags & TI_CLK_CLKCTRL_COMPAT) | |
| data = am3_clkctrl_compat_data; | |
| else | |
| data = am3_clkctrl_data; | |
| } | |
| #endif | |
| #ifdef CONFIG_SOC_AM43XX | |
| if (of_machine_is_compatible("ti,am4372")) { | |
| if (ti_clk_get_features()->flags & TI_CLK_CLKCTRL_COMPAT) | |
| data = am4_clkctrl_compat_data; | |
| else | |
| data = am4_clkctrl_data; | |
| } | |
| if (of_machine_is_compatible("ti,am438x")) { | |
| if (ti_clk_get_features()->flags & TI_CLK_CLKCTRL_COMPAT) | |
| data = am438x_clkctrl_compat_data; | |
| else | |
| data = am438x_clkctrl_data; | |
| } | |
| #endif | |
| #ifdef CONFIG_SOC_TI81XX | |
| if (of_machine_is_compatible("ti,dm814")) | |
| data = dm814_clkctrl_data; | |
| if (of_machine_is_compatible("ti,dm816")) | |
| data = dm816_clkctrl_data; | |
| #endif | |
| if (ti_clk_get_features()->flags & TI_CLK_DEVICE_TYPE_GP) | |
| soc_mask |= CLKF_SOC_NONSEC; | |
| while (data->addr) { | |
| if (addr == data->addr) | |
| break; | |
| data++; | |
| } | |
| if (!data->addr) { | |
| pr_err("%pOF not found from clkctrl data.\n", node); | |
| return; | |
| } | |
| provider = kzalloc(sizeof(*provider), GFP_KERNEL); | |
| if (!provider) | |
| return; | |
| provider->base = of_iomap(node, 0); | |
| legacy_naming = ti_clk_get_features()->flags & TI_CLK_CLKCTRL_COMPAT; | |
| clkctrl_name = clkctrl_get_name(node); | |
| if (clkctrl_name) { | |
| provider->clkdm_name = kasprintf(GFP_KERNEL, | |
| "%s_clkdm", clkctrl_name); | |
| goto clkdm_found; | |
| } | |
| /* | |
| * The code below can be removed when all clkctrl nodes use domain | |
| * specific compatible proprerty and standard clock node naming | |
| */ | |
| if (legacy_naming) { | |
| provider->clkdm_name = kasprintf(GFP_KERNEL, "%pOFnxxx", node->parent); | |
| if (!provider->clkdm_name) { | |
| kfree(provider); | |
| return; | |
| } | |
| /* | |
| * Create default clkdm name, replace _cm from end of parent | |
| * node name with _clkdm | |
| */ | |
| provider->clkdm_name[strlen(provider->clkdm_name) - 2] = 0; | |
| } else { | |
| provider->clkdm_name = kasprintf(GFP_KERNEL, "%pOFn", node); | |
| if (!provider->clkdm_name) { | |
| kfree(provider); | |
| return; | |
| } | |
| /* | |
| * Create default clkdm name, replace _clkctrl from end of | |
| * node name with _clkdm | |
| */ | |
| provider->clkdm_name[strlen(provider->clkdm_name) - 7] = 0; | |
| } | |
| strcat(provider->clkdm_name, "clkdm"); | |
| /* Replace any dash from the clkdm name with underscore */ | |
| c = provider->clkdm_name; | |
| while (*c) { | |
| if (*c == '-') | |
| *c = '_'; | |
| c++; | |
| } | |
| clkdm_found: | |
| INIT_LIST_HEAD(&provider->clocks); | |
| /* Generate clocks */ | |
| reg_data = data->regs; | |
| while (reg_data->parent) { | |
| if ((reg_data->flags & CLKF_SOC_MASK) && | |
| (reg_data->flags & soc_mask) == 0) { | |
| reg_data++; | |
| continue; | |
| } | |
| hw = kzalloc(sizeof(*hw), GFP_KERNEL); | |
| if (!hw) | |
| return; | |
| hw->enable_reg.ptr = provider->base + reg_data->offset; | |
| _ti_clkctrl_setup_subclks(provider, node, reg_data, | |
| hw->enable_reg.ptr, clkctrl_name); | |
| if (reg_data->flags & CLKF_SW_SUP) | |
| hw->enable_bit = MODULEMODE_SWCTRL; | |
| if (reg_data->flags & CLKF_HW_SUP) | |
| hw->enable_bit = MODULEMODE_HWCTRL; | |
| if (reg_data->flags & CLKF_NO_IDLEST) | |
| set_bit(NO_IDLEST, &hw->flags); | |
| if (reg_data->clkdm_name) | |
| hw->clkdm_name = reg_data->clkdm_name; | |
| else | |
| hw->clkdm_name = provider->clkdm_name; | |
| init.parent_names = ®_data->parent; | |
| init.num_parents = 1; | |
| init.flags = 0; | |
| if (reg_data->flags & CLKF_SET_RATE_PARENT) | |
| init.flags |= CLK_SET_RATE_PARENT; | |
| init.name = clkctrl_get_clock_name(node, clkctrl_name, | |
| reg_data->offset, 0, | |
| legacy_naming); | |
| if (!init.name) | |
| goto cleanup; | |
| clkctrl_clk = kzalloc(sizeof(*clkctrl_clk), GFP_KERNEL); | |
| if (!clkctrl_clk) | |
| goto cleanup; | |
| init.ops = &omap4_clkctrl_clk_ops; | |
| hw->hw.init = &init; | |
| clk = ti_clk_register_omap_hw(NULL, &hw->hw, init.name); | |
| if (IS_ERR_OR_NULL(clk)) | |
| goto cleanup; | |
| clkctrl_clk->reg_offset = reg_data->offset; | |
| clkctrl_clk->clk = &hw->hw; | |
| list_add(&clkctrl_clk->node, &provider->clocks); | |
| reg_data++; | |
| } | |
| ret = of_clk_add_hw_provider(node, _ti_omap4_clkctrl_xlate, provider); | |
| if (ret == -EPROBE_DEFER) | |
| ti_clk_retry_init(node, provider, _clkctrl_add_provider); | |
| kfree(clkctrl_name); | |
| return; | |
| cleanup: | |
| kfree(hw); | |
| kfree(init.name); | |
| kfree(clkctrl_name); | |
| kfree(clkctrl_clk); | |
| } | |
| CLK_OF_DECLARE(ti_omap4_clkctrl_clock, "ti,clkctrl", | |
| _ti_omap4_clkctrl_setup); | |
| /** | |
| * ti_clk_is_in_standby - Check if clkctrl clock is in standby or not | |
| * @clk: clock to check standby status for | |
| * | |
| * Finds whether the provided clock is in standby mode or not. Returns | |
| * true if the provided clock is a clkctrl type clock and it is in standby, | |
| * false otherwise. | |
| */ | |
| bool ti_clk_is_in_standby(struct clk *clk) | |
| { | |
| struct clk_hw *hw; | |
| struct clk_hw_omap *hwclk; | |
| u32 val; | |
| hw = __clk_get_hw(clk); | |
| if (!omap2_clk_is_hw_omap(hw)) | |
| return false; | |
| hwclk = to_clk_hw_omap(hw); | |
| val = ti_clk_ll_ops->clk_readl(&hwclk->enable_reg); | |
| if (val & OMAP4_STBYST_MASK) | |
| return true; | |
| return false; | |
| } | |
| EXPORT_SYMBOL_GPL(ti_clk_is_in_standby); |