| // SPDX-License-Identifier: MIT | |
| /* | |
| * Copyright (C) 2019 Google, Inc. | |
| * | |
| * Authors: | |
| * Sean Paul <seanpaul@chromium.org> | |
| */ | |
| #include <linux/average.h> | |
| #include <linux/bitops.h> | |
| #include <linux/slab.h> | |
| #include <linux/workqueue.h> | |
| #include <drm/drm_atomic.h> | |
| #include <drm/drm_atomic_helper.h> | |
| #include <drm/drm_connector.h> | |
| #include <drm/drm_crtc.h> | |
| #include <drm/drm_device.h> | |
| #include <drm/drm_mode_config.h> | |
| #include <drm/drm_modeset_lock.h> | |
| #include <drm/drm_print.h> | |
| #include <drm/drm_self_refresh_helper.h> | |
| /** | |
| * DOC: overview | |
| * | |
| * This helper library provides an easy way for drivers to leverage the atomic | |
| * framework to implement panel self refresh (SR) support. Drivers are | |
| * responsible for initializing and cleaning up the SR helpers on load/unload | |
| * (see &drm_self_refresh_helper_init/&drm_self_refresh_helper_cleanup). | |
| * The connector is responsible for setting | |
| * &drm_connector_state.self_refresh_aware to true at runtime if it is SR-aware | |
| * (meaning it knows how to initiate self refresh on the panel). | |
| * | |
| * Once a crtc has enabled SR using &drm_self_refresh_helper_init, the | |
| * helpers will monitor activity and call back into the driver to enable/disable | |
| * SR as appropriate. The best way to think about this is that it's a DPMS | |
| * on/off request with &drm_crtc_state.self_refresh_active set in crtc state | |
| * that tells you to disable/enable SR on the panel instead of power-cycling it. | |
| * | |
| * During SR, drivers may choose to fully disable their crtc/encoder/bridge | |
| * hardware (in which case no driver changes are necessary), or they can inspect | |
| * &drm_crtc_state.self_refresh_active if they want to enter low power mode | |
| * without full disable (in case full disable/enable is too slow). | |
| * | |
| * SR will be deactivated if there are any atomic updates affecting the | |
| * pipe that is in SR mode. If a crtc is driving multiple connectors, all | |
| * connectors must be SR aware and all will enter/exit SR mode at the same time. | |
| * | |
| * If the crtc and connector are SR aware, but the panel connected does not | |
| * support it (or is otherwise unable to enter SR), the driver should fail | |
| * atomic_check when &drm_crtc_state.self_refresh_active is true. | |
| */ | |
| #define SELF_REFRESH_AVG_SEED_MS 200 | |
| DECLARE_EWMA(psr_time, 4, 4) | |
| struct drm_self_refresh_data { | |
| struct drm_crtc *crtc; | |
| struct delayed_work entry_work; | |
| struct mutex avg_mutex; | |
| struct ewma_psr_time entry_avg_ms; | |
| struct ewma_psr_time exit_avg_ms; | |
| }; | |
| static void drm_self_refresh_helper_entry_work(struct work_struct *work) | |
| { | |
| struct drm_self_refresh_data *sr_data = container_of( | |
| to_delayed_work(work), | |
| struct drm_self_refresh_data, entry_work); | |
| struct drm_crtc *crtc = sr_data->crtc; | |
| struct drm_device *dev = crtc->dev; | |
| struct drm_modeset_acquire_ctx ctx; | |
| struct drm_atomic_state *state; | |
| struct drm_connector *conn; | |
| struct drm_connector_state *conn_state; | |
| struct drm_crtc_state *crtc_state; | |
| int i, ret = 0; | |
| drm_modeset_acquire_init(&ctx, 0); | |
| state = drm_atomic_state_alloc(dev); | |
| if (!state) { | |
| ret = -ENOMEM; | |
| goto out_drop_locks; | |
| } | |
| retry: | |
| state->acquire_ctx = &ctx; | |
| crtc_state = drm_atomic_get_crtc_state(state, crtc); | |
| if (IS_ERR(crtc_state)) { | |
| ret = PTR_ERR(crtc_state); | |
| goto out; | |
| } | |
| if (!crtc_state->enable) | |
| goto out; | |
| ret = drm_atomic_add_affected_connectors(state, crtc); | |
| if (ret) | |
| goto out; | |
| for_each_new_connector_in_state(state, conn, conn_state, i) { | |
| if (!conn_state->self_refresh_aware) | |
| goto out; | |
| } | |
| crtc_state->active = false; | |
| crtc_state->self_refresh_active = true; | |
| ret = drm_atomic_commit(state); | |
| if (ret) | |
| goto out; | |
| out: | |
| if (ret == -EDEADLK) { | |
| drm_atomic_state_clear(state); | |
| ret = drm_modeset_backoff(&ctx); | |
| if (!ret) | |
| goto retry; | |
| } | |
| drm_atomic_state_put(state); | |
| out_drop_locks: | |
| drm_modeset_drop_locks(&ctx); | |
| drm_modeset_acquire_fini(&ctx); | |
| } | |
| /** | |
| * drm_self_refresh_helper_update_avg_times - Updates a crtc's SR time averages | |
| * @state: the state which has just been applied to hardware | |
| * @commit_time_ms: the amount of time in ms that this commit took to complete | |
| * @new_self_refresh_mask: bitmask of crtc's that have self_refresh_active in | |
| * new state | |
| * | |
| * Called after &drm_mode_config_funcs.atomic_commit_tail, this function will | |
| * update the average entry/exit self refresh times on self refresh transitions. | |
| * These averages will be used when calculating how long to delay before | |
| * entering self refresh mode after activity. | |
| */ | |
| void | |
| drm_self_refresh_helper_update_avg_times(struct drm_atomic_state *state, | |
| unsigned int commit_time_ms, | |
| unsigned int new_self_refresh_mask) | |
| { | |
| struct drm_crtc *crtc; | |
| struct drm_crtc_state *old_crtc_state; | |
| int i; | |
| for_each_old_crtc_in_state(state, crtc, old_crtc_state, i) { | |
| bool new_self_refresh_active = new_self_refresh_mask & BIT(i); | |
| struct drm_self_refresh_data *sr_data = crtc->self_refresh_data; | |
| struct ewma_psr_time *time; | |
| if (old_crtc_state->self_refresh_active == | |
| new_self_refresh_active) | |
| continue; | |
| if (new_self_refresh_active) | |
| time = &sr_data->entry_avg_ms; | |
| else | |
| time = &sr_data->exit_avg_ms; | |
| mutex_lock(&sr_data->avg_mutex); | |
| ewma_psr_time_add(time, commit_time_ms); | |
| mutex_unlock(&sr_data->avg_mutex); | |
| } | |
| } | |
| EXPORT_SYMBOL(drm_self_refresh_helper_update_avg_times); | |
| /** | |
| * drm_self_refresh_helper_alter_state - Alters the atomic state for SR exit | |
| * @state: the state currently being checked | |
| * | |
| * Called at the end of atomic check. This function checks the state for flags | |
| * incompatible with self refresh exit and changes them. This is a bit | |
| * disingenuous since userspace is expecting one thing and we're giving it | |
| * another. However in order to keep self refresh entirely hidden from | |
| * userspace, this is required. | |
| * | |
| * At the end, we queue up the self refresh entry work so we can enter PSR after | |
| * the desired delay. | |
| */ | |
| void drm_self_refresh_helper_alter_state(struct drm_atomic_state *state) | |
| { | |
| struct drm_crtc *crtc; | |
| struct drm_crtc_state *crtc_state; | |
| int i; | |
| if (state->async_update || !state->allow_modeset) { | |
| for_each_old_crtc_in_state(state, crtc, crtc_state, i) { | |
| if (crtc_state->self_refresh_active) { | |
| state->async_update = false; | |
| state->allow_modeset = true; | |
| break; | |
| } | |
| } | |
| } | |
| for_each_new_crtc_in_state(state, crtc, crtc_state, i) { | |
| struct drm_self_refresh_data *sr_data; | |
| unsigned int delay; | |
| /* Don't trigger the entry timer when we're already in SR */ | |
| if (crtc_state->self_refresh_active) | |
| continue; | |
| sr_data = crtc->self_refresh_data; | |
| if (!sr_data) | |
| continue; | |
| mutex_lock(&sr_data->avg_mutex); | |
| delay = (ewma_psr_time_read(&sr_data->entry_avg_ms) + | |
| ewma_psr_time_read(&sr_data->exit_avg_ms)) * 2; | |
| mutex_unlock(&sr_data->avg_mutex); | |
| mod_delayed_work(system_wq, &sr_data->entry_work, | |
| msecs_to_jiffies(delay)); | |
| } | |
| } | |
| EXPORT_SYMBOL(drm_self_refresh_helper_alter_state); | |
| /** | |
| * drm_self_refresh_helper_init - Initializes self refresh helpers for a crtc | |
| * @crtc: the crtc which supports self refresh supported displays | |
| * | |
| * Returns zero if successful or -errno on failure | |
| */ | |
| int drm_self_refresh_helper_init(struct drm_crtc *crtc) | |
| { | |
| struct drm_self_refresh_data *sr_data = crtc->self_refresh_data; | |
| /* Helper is already initialized */ | |
| if (WARN_ON(sr_data)) | |
| return -EINVAL; | |
| sr_data = kzalloc(sizeof(*sr_data), GFP_KERNEL); | |
| if (!sr_data) | |
| return -ENOMEM; | |
| INIT_DELAYED_WORK(&sr_data->entry_work, | |
| drm_self_refresh_helper_entry_work); | |
| sr_data->crtc = crtc; | |
| mutex_init(&sr_data->avg_mutex); | |
| ewma_psr_time_init(&sr_data->entry_avg_ms); | |
| ewma_psr_time_init(&sr_data->exit_avg_ms); | |
| /* | |
| * Seed the averages so they're non-zero (and sufficiently large | |
| * for even poorly performing panels). As time goes on, this will be | |
| * averaged out and the values will trend to their true value. | |
| */ | |
| ewma_psr_time_add(&sr_data->entry_avg_ms, SELF_REFRESH_AVG_SEED_MS); | |
| ewma_psr_time_add(&sr_data->exit_avg_ms, SELF_REFRESH_AVG_SEED_MS); | |
| crtc->self_refresh_data = sr_data; | |
| return 0; | |
| } | |
| EXPORT_SYMBOL(drm_self_refresh_helper_init); | |
| /** | |
| * drm_self_refresh_helper_cleanup - Cleans up self refresh helpers for a crtc | |
| * @crtc: the crtc to cleanup | |
| */ | |
| void drm_self_refresh_helper_cleanup(struct drm_crtc *crtc) | |
| { | |
| struct drm_self_refresh_data *sr_data = crtc->self_refresh_data; | |
| /* Helper is already uninitialized */ | |
| if (!sr_data) | |
| return; | |
| crtc->self_refresh_data = NULL; | |
| cancel_delayed_work_sync(&sr_data->entry_work); | |
| kfree(sr_data); | |
| } | |
| EXPORT_SYMBOL(drm_self_refresh_helper_cleanup); |