| // SPDX-License-Identifier: GPL-2.0 | |
| /* | |
| * max44009.c - Support for MAX44009 Ambient Light Sensor | |
| * | |
| * Copyright (c) 2019 Robert Eshleman <bobbyeshleman@gmail.com> | |
| * | |
| * Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX44009.pdf | |
| * | |
| * TODO: Support continuous mode and configuring from manual mode to | |
| * automatic mode. | |
| * | |
| * Default I2C address: 0x4a | |
| */ | |
| #include <linux/init.h> | |
| #include <linux/kernel.h> | |
| #include <linux/bits.h> | |
| #include <linux/i2c.h> | |
| #include <linux/iio/events.h> | |
| #include <linux/iio/iio.h> | |
| #include <linux/iio/sysfs.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/module.h> | |
| #include <linux/util_macros.h> | |
| #define MAX44009_DRV_NAME "max44009" | |
| /* Registers in datasheet order */ | |
| #define MAX44009_REG_INT_STATUS 0x0 | |
| #define MAX44009_REG_INT_EN 0x1 | |
| #define MAX44009_REG_CFG 0x2 | |
| #define MAX44009_REG_LUX_HI 0x3 | |
| #define MAX44009_REG_LUX_LO 0x4 | |
| #define MAX44009_REG_UPPER_THR 0x5 | |
| #define MAX44009_REG_LOWER_THR 0x6 | |
| #define MAX44009_REG_THR_TIMER 0x7 | |
| #define MAX44009_CFG_TIM_MASK GENMASK(2, 0) | |
| #define MAX44009_CFG_MAN_MODE_MASK BIT(6) | |
| /* The maximum rising threshold for the max44009 */ | |
| #define MAX44009_MAXIMUM_THRESHOLD 7520256 | |
| #define MAX44009_THRESH_EXP_MASK (0xf << 4) | |
| #define MAX44009_THRESH_EXP_RSHIFT 4 | |
| #define MAX44009_THRESH_MANT_LSHIFT 4 | |
| #define MAX44009_THRESH_MANT_MASK 0xf | |
| #define MAX44009_UPPER_THR_MINIMUM 15 | |
| /* The max44009 always scales raw readings by 0.045 and is non-configurable */ | |
| #define MAX44009_SCALE_NUMERATOR 45 | |
| #define MAX44009_SCALE_DENOMINATOR 1000 | |
| /* The fixed-point fractional multiplier for de-scaling threshold values */ | |
| #define MAX44009_FRACT_MULT 1000000 | |
| static const u32 max44009_int_time_ns_array[] = { | |
| 800000000, | |
| 400000000, | |
| 200000000, | |
| 100000000, | |
| 50000000, /* Manual mode only */ | |
| 25000000, /* Manual mode only */ | |
| 12500000, /* Manual mode only */ | |
| 6250000, /* Manual mode only */ | |
| }; | |
| static const char max44009_int_time_str[] = | |
| "0.8 " | |
| "0.4 " | |
| "0.2 " | |
| "0.1 " | |
| "0.05 " | |
| "0.025 " | |
| "0.0125 " | |
| "0.00625"; | |
| struct max44009_data { | |
| struct i2c_client *client; | |
| struct mutex lock; | |
| }; | |
| static const struct iio_event_spec max44009_event_spec[] = { | |
| { | |
| .type = IIO_EV_TYPE_THRESH, | |
| .dir = IIO_EV_DIR_RISING, | |
| .mask_separate = BIT(IIO_EV_INFO_VALUE) | | |
| BIT(IIO_EV_INFO_ENABLE), | |
| }, | |
| { | |
| .type = IIO_EV_TYPE_THRESH, | |
| .dir = IIO_EV_DIR_FALLING, | |
| .mask_separate = BIT(IIO_EV_INFO_VALUE) | | |
| BIT(IIO_EV_INFO_ENABLE), | |
| }, | |
| }; | |
| static const struct iio_chan_spec max44009_channels[] = { | |
| { | |
| .type = IIO_LIGHT, | |
| .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED) | | |
| BIT(IIO_CHAN_INFO_INT_TIME), | |
| .event_spec = max44009_event_spec, | |
| .num_event_specs = ARRAY_SIZE(max44009_event_spec), | |
| }, | |
| }; | |
| static int max44009_read_int_time(struct max44009_data *data) | |
| { | |
| int ret = i2c_smbus_read_byte_data(data->client, MAX44009_REG_CFG); | |
| if (ret < 0) | |
| return ret; | |
| return max44009_int_time_ns_array[ret & MAX44009_CFG_TIM_MASK]; | |
| } | |
| static int max44009_write_int_time(struct max44009_data *data, | |
| int val, int val2) | |
| { | |
| struct i2c_client *client = data->client; | |
| int ret, int_time, config; | |
| s64 ns; | |
| ns = val * NSEC_PER_SEC + val2; | |
| int_time = find_closest_descending( | |
| ns, | |
| max44009_int_time_ns_array, | |
| ARRAY_SIZE(max44009_int_time_ns_array)); | |
| ret = i2c_smbus_read_byte_data(client, MAX44009_REG_CFG); | |
| if (ret < 0) | |
| return ret; | |
| config = ret; | |
| config &= int_time; | |
| /* | |
| * To set the integration time, the device must also be in manual | |
| * mode. | |
| */ | |
| config |= MAX44009_CFG_MAN_MODE_MASK; | |
| return i2c_smbus_write_byte_data(client, MAX44009_REG_CFG, config); | |
| } | |
| static int max44009_write_raw(struct iio_dev *indio_dev, | |
| struct iio_chan_spec const *chan, int val, | |
| int val2, long mask) | |
| { | |
| struct max44009_data *data = iio_priv(indio_dev); | |
| int ret; | |
| if (mask == IIO_CHAN_INFO_INT_TIME && chan->type == IIO_LIGHT) { | |
| mutex_lock(&data->lock); | |
| ret = max44009_write_int_time(data, val, val2); | |
| mutex_unlock(&data->lock); | |
| return ret; | |
| } | |
| return -EINVAL; | |
| } | |
| static int max44009_write_raw_get_fmt(struct iio_dev *indio_dev, | |
| struct iio_chan_spec const *chan, | |
| long mask) | |
| { | |
| return IIO_VAL_INT_PLUS_NANO; | |
| } | |
| static int max44009_lux_raw(u8 hi, u8 lo) | |
| { | |
| int mantissa; | |
| int exponent; | |
| /* | |
| * The mantissa consists of the low nibble of the Lux High Byte | |
| * and the low nibble of the Lux Low Byte. | |
| */ | |
| mantissa = ((hi & 0xf) << 4) | (lo & 0xf); | |
| /* The exponent byte is just the upper nibble of the Lux High Byte */ | |
| exponent = (hi >> 4) & 0xf; | |
| /* | |
| * The exponent value is base 2 to the power of the raw exponent byte. | |
| */ | |
| exponent = 1 << exponent; | |
| return exponent * mantissa; | |
| } | |
| #define MAX44009_READ_LUX_XFER_LEN (4) | |
| static int max44009_read_lux_raw(struct max44009_data *data) | |
| { | |
| int ret; | |
| u8 hireg = MAX44009_REG_LUX_HI; | |
| u8 loreg = MAX44009_REG_LUX_LO; | |
| u8 lo = 0; | |
| u8 hi = 0; | |
| struct i2c_msg msgs[] = { | |
| { | |
| .addr = data->client->addr, | |
| .flags = 0, | |
| .len = sizeof(hireg), | |
| .buf = &hireg, | |
| }, | |
| { | |
| .addr = data->client->addr, | |
| .flags = I2C_M_RD, | |
| .len = sizeof(hi), | |
| .buf = &hi, | |
| }, | |
| { | |
| .addr = data->client->addr, | |
| .flags = 0, | |
| .len = sizeof(loreg), | |
| .buf = &loreg, | |
| }, | |
| { | |
| .addr = data->client->addr, | |
| .flags = I2C_M_RD, | |
| .len = sizeof(lo), | |
| .buf = &lo, | |
| } | |
| }; | |
| /* | |
| * Use i2c_transfer instead of smbus read because i2c_transfer | |
| * does NOT use a stop bit between address write and data read. | |
| * Using a stop bit causes disjoint upper/lower byte reads and | |
| * reduces accuracy. | |
| */ | |
| ret = i2c_transfer(data->client->adapter, | |
| msgs, MAX44009_READ_LUX_XFER_LEN); | |
| if (ret != MAX44009_READ_LUX_XFER_LEN) | |
| return -EIO; | |
| return max44009_lux_raw(hi, lo); | |
| } | |
| static int max44009_read_raw(struct iio_dev *indio_dev, | |
| struct iio_chan_spec const *chan, int *val, | |
| int *val2, long mask) | |
| { | |
| struct max44009_data *data = iio_priv(indio_dev); | |
| int lux_raw; | |
| int ret; | |
| switch (mask) { | |
| case IIO_CHAN_INFO_PROCESSED: | |
| switch (chan->type) { | |
| case IIO_LIGHT: | |
| ret = max44009_read_lux_raw(data); | |
| if (ret < 0) | |
| return ret; | |
| lux_raw = ret; | |
| *val = lux_raw * MAX44009_SCALE_NUMERATOR; | |
| *val2 = MAX44009_SCALE_DENOMINATOR; | |
| return IIO_VAL_FRACTIONAL; | |
| default: | |
| return -EINVAL; | |
| } | |
| case IIO_CHAN_INFO_INT_TIME: | |
| switch (chan->type) { | |
| case IIO_LIGHT: | |
| ret = max44009_read_int_time(data); | |
| if (ret < 0) | |
| return ret; | |
| *val2 = ret; | |
| *val = 0; | |
| return IIO_VAL_INT_PLUS_NANO; | |
| default: | |
| return -EINVAL; | |
| } | |
| default: | |
| return -EINVAL; | |
| } | |
| } | |
| static IIO_CONST_ATTR(illuminance_integration_time_available, | |
| max44009_int_time_str); | |
| static struct attribute *max44009_attributes[] = { | |
| &iio_const_attr_illuminance_integration_time_available.dev_attr.attr, | |
| NULL, | |
| }; | |
| static const struct attribute_group max44009_attribute_group = { | |
| .attrs = max44009_attributes, | |
| }; | |
| static int max44009_threshold_byte_from_fraction(int integral, int fractional) | |
| { | |
| int mantissa, exp; | |
| if ((integral <= 0 && fractional <= 0) || | |
| integral > MAX44009_MAXIMUM_THRESHOLD || | |
| (integral == MAX44009_MAXIMUM_THRESHOLD && fractional != 0)) | |
| return -EINVAL; | |
| /* Reverse scaling of fixed-point integral */ | |
| mantissa = integral * MAX44009_SCALE_DENOMINATOR; | |
| mantissa /= MAX44009_SCALE_NUMERATOR; | |
| /* Reverse scaling of fixed-point fractional */ | |
| mantissa += fractional / MAX44009_FRACT_MULT * | |
| (MAX44009_SCALE_DENOMINATOR / MAX44009_SCALE_NUMERATOR); | |
| for (exp = 0; mantissa > 0xff; exp++) | |
| mantissa >>= 1; | |
| mantissa >>= 4; | |
| mantissa &= 0xf; | |
| exp <<= 4; | |
| return exp | mantissa; | |
| } | |
| static int max44009_get_thr_reg(enum iio_event_direction dir) | |
| { | |
| switch (dir) { | |
| case IIO_EV_DIR_RISING: | |
| return MAX44009_REG_UPPER_THR; | |
| case IIO_EV_DIR_FALLING: | |
| return MAX44009_REG_LOWER_THR; | |
| default: | |
| return -EINVAL; | |
| } | |
| } | |
| static int max44009_write_event_value(struct iio_dev *indio_dev, | |
| const struct iio_chan_spec *chan, | |
| enum iio_event_type type, | |
| enum iio_event_direction dir, | |
| enum iio_event_info info, | |
| int val, int val2) | |
| { | |
| struct max44009_data *data = iio_priv(indio_dev); | |
| int reg, threshold; | |
| if (info != IIO_EV_INFO_VALUE || chan->type != IIO_LIGHT) | |
| return -EINVAL; | |
| threshold = max44009_threshold_byte_from_fraction(val, val2); | |
| if (threshold < 0) | |
| return threshold; | |
| reg = max44009_get_thr_reg(dir); | |
| if (reg < 0) | |
| return reg; | |
| return i2c_smbus_write_byte_data(data->client, reg, threshold); | |
| } | |
| static int max44009_read_threshold(struct iio_dev *indio_dev, | |
| enum iio_event_direction dir) | |
| { | |
| struct max44009_data *data = iio_priv(indio_dev); | |
| int byte, reg; | |
| int mantissa, exponent; | |
| reg = max44009_get_thr_reg(dir); | |
| if (reg < 0) | |
| return reg; | |
| byte = i2c_smbus_read_byte_data(data->client, reg); | |
| if (byte < 0) | |
| return byte; | |
| mantissa = byte & MAX44009_THRESH_MANT_MASK; | |
| mantissa <<= MAX44009_THRESH_MANT_LSHIFT; | |
| /* | |
| * To get the upper threshold, always adds the minimum upper threshold | |
| * value to the shifted byte value (see datasheet). | |
| */ | |
| if (dir == IIO_EV_DIR_RISING) | |
| mantissa += MAX44009_UPPER_THR_MINIMUM; | |
| /* | |
| * Exponent is base 2 to the power of the threshold exponent byte | |
| * value | |
| */ | |
| exponent = byte & MAX44009_THRESH_EXP_MASK; | |
| exponent >>= MAX44009_THRESH_EXP_RSHIFT; | |
| return (1 << exponent) * mantissa; | |
| } | |
| static int max44009_read_event_value(struct iio_dev *indio_dev, | |
| const struct iio_chan_spec *chan, | |
| enum iio_event_type type, | |
| enum iio_event_direction dir, | |
| enum iio_event_info info, | |
| int *val, int *val2) | |
| { | |
| int ret; | |
| int threshold; | |
| if (chan->type != IIO_LIGHT || type != IIO_EV_TYPE_THRESH) | |
| return -EINVAL; | |
| ret = max44009_read_threshold(indio_dev, dir); | |
| if (ret < 0) | |
| return ret; | |
| threshold = ret; | |
| *val = threshold * MAX44009_SCALE_NUMERATOR; | |
| *val2 = MAX44009_SCALE_DENOMINATOR; | |
| return IIO_VAL_FRACTIONAL; | |
| } | |
| static int max44009_write_event_config(struct iio_dev *indio_dev, | |
| const struct iio_chan_spec *chan, | |
| enum iio_event_type type, | |
| enum iio_event_direction dir, | |
| int state) | |
| { | |
| struct max44009_data *data = iio_priv(indio_dev); | |
| int ret; | |
| if (chan->type != IIO_LIGHT || type != IIO_EV_TYPE_THRESH) | |
| return -EINVAL; | |
| ret = i2c_smbus_write_byte_data(data->client, | |
| MAX44009_REG_INT_EN, state); | |
| if (ret < 0) | |
| return ret; | |
| /* | |
| * Set device to trigger interrupt immediately upon exceeding | |
| * the threshold limit. | |
| */ | |
| return i2c_smbus_write_byte_data(data->client, | |
| MAX44009_REG_THR_TIMER, 0); | |
| } | |
| static int max44009_read_event_config(struct iio_dev *indio_dev, | |
| const struct iio_chan_spec *chan, | |
| enum iio_event_type type, | |
| enum iio_event_direction dir) | |
| { | |
| struct max44009_data *data = iio_priv(indio_dev); | |
| if (chan->type != IIO_LIGHT || type != IIO_EV_TYPE_THRESH) | |
| return -EINVAL; | |
| return i2c_smbus_read_byte_data(data->client, MAX44009_REG_INT_EN); | |
| } | |
| static const struct iio_info max44009_info = { | |
| .read_raw = max44009_read_raw, | |
| .write_raw = max44009_write_raw, | |
| .write_raw_get_fmt = max44009_write_raw_get_fmt, | |
| .read_event_value = max44009_read_event_value, | |
| .read_event_config = max44009_read_event_config, | |
| .write_event_value = max44009_write_event_value, | |
| .write_event_config = max44009_write_event_config, | |
| .attrs = &max44009_attribute_group, | |
| }; | |
| static irqreturn_t max44009_threaded_irq_handler(int irq, void *p) | |
| { | |
| struct iio_dev *indio_dev = p; | |
| struct max44009_data *data = iio_priv(indio_dev); | |
| int ret; | |
| ret = i2c_smbus_read_byte_data(data->client, MAX44009_REG_INT_STATUS); | |
| if (ret) { | |
| iio_push_event(indio_dev, | |
| IIO_UNMOD_EVENT_CODE(IIO_LIGHT, 0, | |
| IIO_EV_TYPE_THRESH, | |
| IIO_EV_DIR_EITHER), | |
| iio_get_time_ns(indio_dev)); | |
| return IRQ_HANDLED; | |
| } | |
| return IRQ_NONE; | |
| } | |
| static int max44009_probe(struct i2c_client *client, | |
| const struct i2c_device_id *id) | |
| { | |
| struct max44009_data *data; | |
| struct iio_dev *indio_dev; | |
| int ret; | |
| indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); | |
| if (!indio_dev) | |
| return -ENOMEM; | |
| data = iio_priv(indio_dev); | |
| i2c_set_clientdata(client, indio_dev); | |
| data->client = client; | |
| indio_dev->info = &max44009_info; | |
| indio_dev->modes = INDIO_DIRECT_MODE; | |
| indio_dev->name = MAX44009_DRV_NAME; | |
| indio_dev->channels = max44009_channels; | |
| indio_dev->num_channels = ARRAY_SIZE(max44009_channels); | |
| mutex_init(&data->lock); | |
| /* Clear any stale interrupt bit */ | |
| ret = i2c_smbus_read_byte_data(client, MAX44009_REG_CFG); | |
| if (ret < 0) | |
| return ret; | |
| if (client->irq > 0) { | |
| ret = devm_request_threaded_irq(&client->dev, client->irq, | |
| NULL, | |
| max44009_threaded_irq_handler, | |
| IRQF_TRIGGER_FALLING | | |
| IRQF_ONESHOT | IRQF_SHARED, | |
| "max44009_event", | |
| indio_dev); | |
| if (ret < 0) | |
| return ret; | |
| } | |
| return devm_iio_device_register(&client->dev, indio_dev); | |
| } | |
| static const struct i2c_device_id max44009_id[] = { | |
| { "max44009", 0 }, | |
| { } | |
| }; | |
| MODULE_DEVICE_TABLE(i2c, max44009_id); | |
| static struct i2c_driver max44009_driver = { | |
| .driver = { | |
| .name = MAX44009_DRV_NAME, | |
| }, | |
| .probe = max44009_probe, | |
| .id_table = max44009_id, | |
| }; | |
| module_i2c_driver(max44009_driver); | |
| static const struct of_device_id max44009_of_match[] = { | |
| { .compatible = "maxim,max44009" }, | |
| { } | |
| }; | |
| MODULE_DEVICE_TABLE(of, max44009_of_match); | |
| MODULE_AUTHOR("Robert Eshleman <bobbyeshleman@gmail.com>"); | |
| MODULE_LICENSE("GPL v2"); | |
| MODULE_DESCRIPTION("MAX44009 ambient light sensor driver"); |