| // SPDX-License-Identifier: GPL-2.0 | |
| // Copyright (C) 2018 Microchip Technology | |
| #include <linux/kernel.h> | |
| #include <linux/module.h> | |
| #include <linux/delay.h> | |
| #include <linux/mii.h> | |
| #include <linux/phy.h> | |
| /* External Register Control Register */ | |
| #define LAN87XX_EXT_REG_CTL (0x14) | |
| #define LAN87XX_EXT_REG_CTL_RD_CTL (0x1000) | |
| #define LAN87XX_EXT_REG_CTL_WR_CTL (0x0800) | |
| /* External Register Read Data Register */ | |
| #define LAN87XX_EXT_REG_RD_DATA (0x15) | |
| /* External Register Write Data Register */ | |
| #define LAN87XX_EXT_REG_WR_DATA (0x16) | |
| /* Interrupt Source Register */ | |
| #define LAN87XX_INTERRUPT_SOURCE (0x18) | |
| /* Interrupt Mask Register */ | |
| #define LAN87XX_INTERRUPT_MASK (0x19) | |
| #define LAN87XX_MASK_LINK_UP (0x0004) | |
| #define LAN87XX_MASK_LINK_DOWN (0x0002) | |
| /* phyaccess nested types */ | |
| #define PHYACC_ATTR_MODE_READ 0 | |
| #define PHYACC_ATTR_MODE_WRITE 1 | |
| #define PHYACC_ATTR_MODE_MODIFY 2 | |
| #define PHYACC_ATTR_BANK_SMI 0 | |
| #define PHYACC_ATTR_BANK_MISC 1 | |
| #define PHYACC_ATTR_BANK_PCS 2 | |
| #define PHYACC_ATTR_BANK_AFE 3 | |
| #define PHYACC_ATTR_BANK_MAX 7 | |
| #define DRIVER_AUTHOR "Nisar Sayed <nisar.sayed@microchip.com>" | |
| #define DRIVER_DESC "Microchip LAN87XX T1 PHY driver" | |
| struct access_ereg_val { | |
| u8 mode; | |
| u8 bank; | |
| u8 offset; | |
| u16 val; | |
| u16 mask; | |
| }; | |
| static int access_ereg(struct phy_device *phydev, u8 mode, u8 bank, | |
| u8 offset, u16 val) | |
| { | |
| u16 ereg = 0; | |
| int rc = 0; | |
| if (mode > PHYACC_ATTR_MODE_WRITE || bank > PHYACC_ATTR_BANK_MAX) | |
| return -EINVAL; | |
| if (bank == PHYACC_ATTR_BANK_SMI) { | |
| if (mode == PHYACC_ATTR_MODE_WRITE) | |
| rc = phy_write(phydev, offset, val); | |
| else | |
| rc = phy_read(phydev, offset); | |
| return rc; | |
| } | |
| if (mode == PHYACC_ATTR_MODE_WRITE) { | |
| ereg = LAN87XX_EXT_REG_CTL_WR_CTL; | |
| rc = phy_write(phydev, LAN87XX_EXT_REG_WR_DATA, val); | |
| if (rc < 0) | |
| return rc; | |
| } else { | |
| ereg = LAN87XX_EXT_REG_CTL_RD_CTL; | |
| } | |
| ereg |= (bank << 8) | offset; | |
| rc = phy_write(phydev, LAN87XX_EXT_REG_CTL, ereg); | |
| if (rc < 0) | |
| return rc; | |
| if (mode == PHYACC_ATTR_MODE_READ) | |
| rc = phy_read(phydev, LAN87XX_EXT_REG_RD_DATA); | |
| return rc; | |
| } | |
| static int access_ereg_modify_changed(struct phy_device *phydev, | |
| u8 bank, u8 offset, u16 val, u16 mask) | |
| { | |
| int new = 0, rc = 0; | |
| if (bank > PHYACC_ATTR_BANK_MAX) | |
| return -EINVAL; | |
| rc = access_ereg(phydev, PHYACC_ATTR_MODE_READ, bank, offset, val); | |
| if (rc < 0) | |
| return rc; | |
| new = val | (rc & (mask ^ 0xFFFF)); | |
| rc = access_ereg(phydev, PHYACC_ATTR_MODE_WRITE, bank, offset, new); | |
| return rc; | |
| } | |
| static int lan87xx_phy_init(struct phy_device *phydev) | |
| { | |
| static const struct access_ereg_val init[] = { | |
| /* TX Amplitude = 5 */ | |
| {PHYACC_ATTR_MODE_MODIFY, PHYACC_ATTR_BANK_AFE, 0x0B, | |
| 0x000A, 0x001E}, | |
| /* Clear SMI interrupts */ | |
| {PHYACC_ATTR_MODE_READ, PHYACC_ATTR_BANK_SMI, 0x18, | |
| 0, 0}, | |
| /* Clear MISC interrupts */ | |
| {PHYACC_ATTR_MODE_READ, PHYACC_ATTR_BANK_MISC, 0x08, | |
| 0, 0}, | |
| /* Turn on TC10 Ring Oscillator (ROSC) */ | |
| {PHYACC_ATTR_MODE_MODIFY, PHYACC_ATTR_BANK_MISC, 0x20, | |
| 0x0020, 0x0020}, | |
| /* WUR Detect Length to 1.2uS, LPC Detect Length to 1.09uS */ | |
| {PHYACC_ATTR_MODE_WRITE, PHYACC_ATTR_BANK_PCS, 0x20, | |
| 0x283C, 0}, | |
| /* Wake_In Debounce Length to 39uS, Wake_Out Length to 79uS */ | |
| {PHYACC_ATTR_MODE_WRITE, PHYACC_ATTR_BANK_MISC, 0x21, | |
| 0x274F, 0}, | |
| /* Enable Auto Wake Forward to Wake_Out, ROSC on, Sleep, | |
| * and Wake_In to wake PHY | |
| */ | |
| {PHYACC_ATTR_MODE_WRITE, PHYACC_ATTR_BANK_MISC, 0x20, | |
| 0x80A7, 0}, | |
| /* Enable WUP Auto Fwd, Enable Wake on MDI, Wakeup Debouncer | |
| * to 128 uS | |
| */ | |
| {PHYACC_ATTR_MODE_WRITE, PHYACC_ATTR_BANK_MISC, 0x24, | |
| 0xF110, 0}, | |
| /* Enable HW Init */ | |
| {PHYACC_ATTR_MODE_MODIFY, PHYACC_ATTR_BANK_SMI, 0x1A, | |
| 0x0100, 0x0100}, | |
| }; | |
| int rc, i; | |
| /* Start manual initialization procedures in Managed Mode */ | |
| rc = access_ereg_modify_changed(phydev, PHYACC_ATTR_BANK_SMI, | |
| 0x1a, 0x0000, 0x0100); | |
| if (rc < 0) | |
| return rc; | |
| /* Soft Reset the SMI block */ | |
| rc = access_ereg_modify_changed(phydev, PHYACC_ATTR_BANK_SMI, | |
| 0x00, 0x8000, 0x8000); | |
| if (rc < 0) | |
| return rc; | |
| /* Check to see if the self-clearing bit is cleared */ | |
| usleep_range(1000, 2000); | |
| rc = access_ereg(phydev, PHYACC_ATTR_MODE_READ, | |
| PHYACC_ATTR_BANK_SMI, 0x00, 0); | |
| if (rc < 0) | |
| return rc; | |
| if ((rc & 0x8000) != 0) | |
| return -ETIMEDOUT; | |
| /* PHY Initialization */ | |
| for (i = 0; i < ARRAY_SIZE(init); i++) { | |
| if (init[i].mode == PHYACC_ATTR_MODE_MODIFY) { | |
| rc = access_ereg_modify_changed(phydev, init[i].bank, | |
| init[i].offset, | |
| init[i].val, | |
| init[i].mask); | |
| } else { | |
| rc = access_ereg(phydev, init[i].mode, init[i].bank, | |
| init[i].offset, init[i].val); | |
| } | |
| if (rc < 0) | |
| return rc; | |
| } | |
| return 0; | |
| } | |
| static int lan87xx_phy_config_intr(struct phy_device *phydev) | |
| { | |
| int rc, val = 0; | |
| if (phydev->interrupts == PHY_INTERRUPT_ENABLED) { | |
| /* unmask all source and clear them before enable */ | |
| rc = phy_write(phydev, LAN87XX_INTERRUPT_MASK, 0x7FFF); | |
| rc = phy_read(phydev, LAN87XX_INTERRUPT_SOURCE); | |
| val = LAN87XX_MASK_LINK_UP | LAN87XX_MASK_LINK_DOWN; | |
| rc = phy_write(phydev, LAN87XX_INTERRUPT_MASK, val); | |
| } else { | |
| rc = phy_write(phydev, LAN87XX_INTERRUPT_MASK, val); | |
| if (rc) | |
| return rc; | |
| rc = phy_read(phydev, LAN87XX_INTERRUPT_SOURCE); | |
| } | |
| return rc < 0 ? rc : 0; | |
| } | |
| static irqreturn_t lan87xx_handle_interrupt(struct phy_device *phydev) | |
| { | |
| int irq_status; | |
| irq_status = phy_read(phydev, LAN87XX_INTERRUPT_SOURCE); | |
| if (irq_status < 0) { | |
| phy_error(phydev); | |
| return IRQ_NONE; | |
| } | |
| if (irq_status == 0) | |
| return IRQ_NONE; | |
| phy_trigger_machine(phydev); | |
| return IRQ_HANDLED; | |
| } | |
| static int lan87xx_config_init(struct phy_device *phydev) | |
| { | |
| int rc = lan87xx_phy_init(phydev); | |
| return rc < 0 ? rc : 0; | |
| } | |
| static struct phy_driver microchip_t1_phy_driver[] = { | |
| { | |
| .phy_id = 0x0007c150, | |
| .phy_id_mask = 0xfffffff0, | |
| .name = "Microchip LAN87xx T1", | |
| .features = PHY_BASIC_T1_FEATURES, | |
| .config_init = lan87xx_config_init, | |
| .config_intr = lan87xx_phy_config_intr, | |
| .handle_interrupt = lan87xx_handle_interrupt, | |
| .suspend = genphy_suspend, | |
| .resume = genphy_resume, | |
| } | |
| }; | |
| module_phy_driver(microchip_t1_phy_driver); | |
| static struct mdio_device_id __maybe_unused microchip_t1_tbl[] = { | |
| { 0x0007c150, 0xfffffff0 }, | |
| { } | |
| }; | |
| MODULE_DEVICE_TABLE(mdio, microchip_t1_tbl); | |
| MODULE_AUTHOR(DRIVER_AUTHOR); | |
| MODULE_DESCRIPTION(DRIVER_DESC); | |
| MODULE_LICENSE("GPL"); |