| // SPDX-License-Identifier: GPL-2.0-only | |
| /* | |
| * hdaps.c - driver for IBM's Hard Drive Active Protection System | |
| * | |
| * Copyright (C) 2005 Robert Love <rml@novell.com> | |
| * Copyright (C) 2005 Jesper Juhl <jj@chaosbits.net> | |
| * | |
| * The HardDisk Active Protection System (hdaps) is present in IBM ThinkPads | |
| * starting with the R40, T41, and X40. It provides a basic two-axis | |
| * accelerometer and other data, such as the device's temperature. | |
| * | |
| * This driver is based on the document by Mark A. Smith available at | |
| * http://www.almaden.ibm.com/cs/people/marksmith/tpaps.html and a lot of trial | |
| * and error. | |
| */ | |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt | |
| #include <linux/delay.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/input.h> | |
| #include <linux/kernel.h> | |
| #include <linux/mutex.h> | |
| #include <linux/module.h> | |
| #include <linux/timer.h> | |
| #include <linux/dmi.h> | |
| #include <linux/jiffies.h> | |
| #include <linux/io.h> | |
| #define HDAPS_LOW_PORT 0x1600 /* first port used by hdaps */ | |
| #define HDAPS_NR_PORTS 0x30 /* number of ports: 0x1600 - 0x162f */ | |
| #define HDAPS_PORT_STATE 0x1611 /* device state */ | |
| #define HDAPS_PORT_YPOS 0x1612 /* y-axis position */ | |
| #define HDAPS_PORT_XPOS 0x1614 /* x-axis position */ | |
| #define HDAPS_PORT_TEMP1 0x1616 /* device temperature, in Celsius */ | |
| #define HDAPS_PORT_YVAR 0x1617 /* y-axis variance (what is this?) */ | |
| #define HDAPS_PORT_XVAR 0x1619 /* x-axis variance (what is this?) */ | |
| #define HDAPS_PORT_TEMP2 0x161b /* device temperature (again?) */ | |
| #define HDAPS_PORT_UNKNOWN 0x161c /* what is this? */ | |
| #define HDAPS_PORT_KMACT 0x161d /* keyboard or mouse activity */ | |
| #define STATE_FRESH 0x50 /* accelerometer data is fresh */ | |
| #define KEYBD_MASK 0x20 /* set if keyboard activity */ | |
| #define MOUSE_MASK 0x40 /* set if mouse activity */ | |
| #define KEYBD_ISSET(n) (!! (n & KEYBD_MASK)) /* keyboard used? */ | |
| #define MOUSE_ISSET(n) (!! (n & MOUSE_MASK)) /* mouse used? */ | |
| #define INIT_TIMEOUT_MSECS 4000 /* wait up to 4s for device init ... */ | |
| #define INIT_WAIT_MSECS 200 /* ... in 200ms increments */ | |
| #define HDAPS_POLL_INTERVAL 50 /* poll for input every 1/20s (50 ms)*/ | |
| #define HDAPS_INPUT_FUZZ 4 /* input event threshold */ | |
| #define HDAPS_INPUT_FLAT 4 | |
| #define HDAPS_X_AXIS (1 << 0) | |
| #define HDAPS_Y_AXIS (1 << 1) | |
| #define HDAPS_BOTH_AXES (HDAPS_X_AXIS | HDAPS_Y_AXIS) | |
| static struct platform_device *pdev; | |
| static struct input_dev *hdaps_idev; | |
| static unsigned int hdaps_invert; | |
| static u8 km_activity; | |
| static int rest_x; | |
| static int rest_y; | |
| static DEFINE_MUTEX(hdaps_mtx); | |
| /* | |
| * __get_latch - Get the value from a given port. Callers must hold hdaps_mtx. | |
| */ | |
| static inline u8 __get_latch(u16 port) | |
| { | |
| return inb(port) & 0xff; | |
| } | |
| /* | |
| * __check_latch - Check a port latch for a given value. Returns zero if the | |
| * port contains the given value. Callers must hold hdaps_mtx. | |
| */ | |
| static inline int __check_latch(u16 port, u8 val) | |
| { | |
| if (__get_latch(port) == val) | |
| return 0; | |
| return -EINVAL; | |
| } | |
| /* | |
| * __wait_latch - Wait up to 100us for a port latch to get a certain value, | |
| * returning zero if the value is obtained. Callers must hold hdaps_mtx. | |
| */ | |
| static int __wait_latch(u16 port, u8 val) | |
| { | |
| unsigned int i; | |
| for (i = 0; i < 20; i++) { | |
| if (!__check_latch(port, val)) | |
| return 0; | |
| udelay(5); | |
| } | |
| return -EIO; | |
| } | |
| /* | |
| * __device_refresh - request a refresh from the accelerometer. Does not wait | |
| * for refresh to complete. Callers must hold hdaps_mtx. | |
| */ | |
| static void __device_refresh(void) | |
| { | |
| udelay(200); | |
| if (inb(0x1604) != STATE_FRESH) { | |
| outb(0x11, 0x1610); | |
| outb(0x01, 0x161f); | |
| } | |
| } | |
| /* | |
| * __device_refresh_sync - request a synchronous refresh from the | |
| * accelerometer. We wait for the refresh to complete. Returns zero if | |
| * successful and nonzero on error. Callers must hold hdaps_mtx. | |
| */ | |
| static int __device_refresh_sync(void) | |
| { | |
| __device_refresh(); | |
| return __wait_latch(0x1604, STATE_FRESH); | |
| } | |
| /* | |
| * __device_complete - indicate to the accelerometer that we are done reading | |
| * data, and then initiate an async refresh. Callers must hold hdaps_mtx. | |
| */ | |
| static inline void __device_complete(void) | |
| { | |
| inb(0x161f); | |
| inb(0x1604); | |
| __device_refresh(); | |
| } | |
| /* | |
| * hdaps_readb_one - reads a byte from a single I/O port, placing the value in | |
| * the given pointer. Returns zero on success or a negative error on failure. | |
| * Can sleep. | |
| */ | |
| static int hdaps_readb_one(unsigned int port, u8 *val) | |
| { | |
| int ret; | |
| mutex_lock(&hdaps_mtx); | |
| /* do a sync refresh -- we need to be sure that we read fresh data */ | |
| ret = __device_refresh_sync(); | |
| if (ret) | |
| goto out; | |
| *val = inb(port); | |
| __device_complete(); | |
| out: | |
| mutex_unlock(&hdaps_mtx); | |
| return ret; | |
| } | |
| /* __hdaps_read_pair - internal lockless helper for hdaps_read_pair(). */ | |
| static int __hdaps_read_pair(unsigned int port1, unsigned int port2, | |
| int *x, int *y) | |
| { | |
| /* do a sync refresh -- we need to be sure that we read fresh data */ | |
| if (__device_refresh_sync()) | |
| return -EIO; | |
| *y = inw(port2); | |
| *x = inw(port1); | |
| km_activity = inb(HDAPS_PORT_KMACT); | |
| __device_complete(); | |
| /* hdaps_invert is a bitvector to negate the axes */ | |
| if (hdaps_invert & HDAPS_X_AXIS) | |
| *x = -*x; | |
| if (hdaps_invert & HDAPS_Y_AXIS) | |
| *y = -*y; | |
| return 0; | |
| } | |
| /* | |
| * hdaps_read_pair - reads the values from a pair of ports, placing the values | |
| * in the given pointers. Returns zero on success. Can sleep. | |
| */ | |
| static int hdaps_read_pair(unsigned int port1, unsigned int port2, | |
| int *val1, int *val2) | |
| { | |
| int ret; | |
| mutex_lock(&hdaps_mtx); | |
| ret = __hdaps_read_pair(port1, port2, val1, val2); | |
| mutex_unlock(&hdaps_mtx); | |
| return ret; | |
| } | |
| /* | |
| * hdaps_device_init - initialize the accelerometer. Returns zero on success | |
| * and negative error code on failure. Can sleep. | |
| */ | |
| static int hdaps_device_init(void) | |
| { | |
| int total, ret = -ENXIO; | |
| mutex_lock(&hdaps_mtx); | |
| outb(0x13, 0x1610); | |
| outb(0x01, 0x161f); | |
| if (__wait_latch(0x161f, 0x00)) | |
| goto out; | |
| /* | |
| * Most ThinkPads return 0x01. | |
| * | |
| * Others--namely the R50p, T41p, and T42p--return 0x03. These laptops | |
| * have "inverted" axises. | |
| * | |
| * The 0x02 value occurs when the chip has been previously initialized. | |
| */ | |
| if (__check_latch(0x1611, 0x03) && | |
| __check_latch(0x1611, 0x02) && | |
| __check_latch(0x1611, 0x01)) | |
| goto out; | |
| printk(KERN_DEBUG "hdaps: initial latch check good (0x%02x)\n", | |
| __get_latch(0x1611)); | |
| outb(0x17, 0x1610); | |
| outb(0x81, 0x1611); | |
| outb(0x01, 0x161f); | |
| if (__wait_latch(0x161f, 0x00)) | |
| goto out; | |
| if (__wait_latch(0x1611, 0x00)) | |
| goto out; | |
| if (__wait_latch(0x1612, 0x60)) | |
| goto out; | |
| if (__wait_latch(0x1613, 0x00)) | |
| goto out; | |
| outb(0x14, 0x1610); | |
| outb(0x01, 0x1611); | |
| outb(0x01, 0x161f); | |
| if (__wait_latch(0x161f, 0x00)) | |
| goto out; | |
| outb(0x10, 0x1610); | |
| outb(0xc8, 0x1611); | |
| outb(0x00, 0x1612); | |
| outb(0x02, 0x1613); | |
| outb(0x01, 0x161f); | |
| if (__wait_latch(0x161f, 0x00)) | |
| goto out; | |
| if (__device_refresh_sync()) | |
| goto out; | |
| if (__wait_latch(0x1611, 0x00)) | |
| goto out; | |
| /* we have done our dance, now let's wait for the applause */ | |
| for (total = INIT_TIMEOUT_MSECS; total > 0; total -= INIT_WAIT_MSECS) { | |
| int x, y; | |
| /* a read of the device helps push it into action */ | |
| __hdaps_read_pair(HDAPS_PORT_XPOS, HDAPS_PORT_YPOS, &x, &y); | |
| if (!__wait_latch(0x1611, 0x02)) { | |
| ret = 0; | |
| break; | |
| } | |
| msleep(INIT_WAIT_MSECS); | |
| } | |
| out: | |
| mutex_unlock(&hdaps_mtx); | |
| return ret; | |
| } | |
| /* Device model stuff */ | |
| static int hdaps_probe(struct platform_device *dev) | |
| { | |
| int ret; | |
| ret = hdaps_device_init(); | |
| if (ret) | |
| return ret; | |
| pr_info("device successfully initialized\n"); | |
| return 0; | |
| } | |
| #ifdef CONFIG_PM_SLEEP | |
| static int hdaps_resume(struct device *dev) | |
| { | |
| return hdaps_device_init(); | |
| } | |
| #endif | |
| static SIMPLE_DEV_PM_OPS(hdaps_pm, NULL, hdaps_resume); | |
| static struct platform_driver hdaps_driver = { | |
| .probe = hdaps_probe, | |
| .driver = { | |
| .name = "hdaps", | |
| .pm = &hdaps_pm, | |
| }, | |
| }; | |
| /* | |
| * hdaps_calibrate - Set our "resting" values. Callers must hold hdaps_mtx. | |
| */ | |
| static void hdaps_calibrate(void) | |
| { | |
| __hdaps_read_pair(HDAPS_PORT_XPOS, HDAPS_PORT_YPOS, &rest_x, &rest_y); | |
| } | |
| static void hdaps_mousedev_poll(struct input_dev *input_dev) | |
| { | |
| int x, y; | |
| mutex_lock(&hdaps_mtx); | |
| if (__hdaps_read_pair(HDAPS_PORT_XPOS, HDAPS_PORT_YPOS, &x, &y)) | |
| goto out; | |
| input_report_abs(input_dev, ABS_X, x - rest_x); | |
| input_report_abs(input_dev, ABS_Y, y - rest_y); | |
| input_sync(input_dev); | |
| out: | |
| mutex_unlock(&hdaps_mtx); | |
| } | |
| /* Sysfs Files */ | |
| static ssize_t hdaps_position_show(struct device *dev, | |
| struct device_attribute *attr, char *buf) | |
| { | |
| int ret, x, y; | |
| ret = hdaps_read_pair(HDAPS_PORT_XPOS, HDAPS_PORT_YPOS, &x, &y); | |
| if (ret) | |
| return ret; | |
| return sprintf(buf, "(%d,%d)\n", x, y); | |
| } | |
| static ssize_t hdaps_variance_show(struct device *dev, | |
| struct device_attribute *attr, char *buf) | |
| { | |
| int ret, x, y; | |
| ret = hdaps_read_pair(HDAPS_PORT_XVAR, HDAPS_PORT_YVAR, &x, &y); | |
| if (ret) | |
| return ret; | |
| return sprintf(buf, "(%d,%d)\n", x, y); | |
| } | |
| static ssize_t hdaps_temp1_show(struct device *dev, | |
| struct device_attribute *attr, char *buf) | |
| { | |
| u8 temp; | |
| int ret; | |
| ret = hdaps_readb_one(HDAPS_PORT_TEMP1, &temp); | |
| if (ret) | |
| return ret; | |
| return sprintf(buf, "%u\n", temp); | |
| } | |
| static ssize_t hdaps_temp2_show(struct device *dev, | |
| struct device_attribute *attr, char *buf) | |
| { | |
| u8 temp; | |
| int ret; | |
| ret = hdaps_readb_one(HDAPS_PORT_TEMP2, &temp); | |
| if (ret) | |
| return ret; | |
| return sprintf(buf, "%u\n", temp); | |
| } | |
| static ssize_t hdaps_keyboard_activity_show(struct device *dev, | |
| struct device_attribute *attr, | |
| char *buf) | |
| { | |
| return sprintf(buf, "%u\n", KEYBD_ISSET(km_activity)); | |
| } | |
| static ssize_t hdaps_mouse_activity_show(struct device *dev, | |
| struct device_attribute *attr, | |
| char *buf) | |
| { | |
| return sprintf(buf, "%u\n", MOUSE_ISSET(km_activity)); | |
| } | |
| static ssize_t hdaps_calibrate_show(struct device *dev, | |
| struct device_attribute *attr, char *buf) | |
| { | |
| return sprintf(buf, "(%d,%d)\n", rest_x, rest_y); | |
| } | |
| static ssize_t hdaps_calibrate_store(struct device *dev, | |
| struct device_attribute *attr, | |
| const char *buf, size_t count) | |
| { | |
| mutex_lock(&hdaps_mtx); | |
| hdaps_calibrate(); | |
| mutex_unlock(&hdaps_mtx); | |
| return count; | |
| } | |
| static ssize_t hdaps_invert_show(struct device *dev, | |
| struct device_attribute *attr, char *buf) | |
| { | |
| return sprintf(buf, "%u\n", hdaps_invert); | |
| } | |
| static ssize_t hdaps_invert_store(struct device *dev, | |
| struct device_attribute *attr, | |
| const char *buf, size_t count) | |
| { | |
| int invert; | |
| if (sscanf(buf, "%d", &invert) != 1 || | |
| invert < 0 || invert > HDAPS_BOTH_AXES) | |
| return -EINVAL; | |
| hdaps_invert = invert; | |
| hdaps_calibrate(); | |
| return count; | |
| } | |
| static DEVICE_ATTR(position, 0444, hdaps_position_show, NULL); | |
| static DEVICE_ATTR(variance, 0444, hdaps_variance_show, NULL); | |
| static DEVICE_ATTR(temp1, 0444, hdaps_temp1_show, NULL); | |
| static DEVICE_ATTR(temp2, 0444, hdaps_temp2_show, NULL); | |
| static DEVICE_ATTR(keyboard_activity, 0444, hdaps_keyboard_activity_show, NULL); | |
| static DEVICE_ATTR(mouse_activity, 0444, hdaps_mouse_activity_show, NULL); | |
| static DEVICE_ATTR(calibrate, 0644, hdaps_calibrate_show,hdaps_calibrate_store); | |
| static DEVICE_ATTR(invert, 0644, hdaps_invert_show, hdaps_invert_store); | |
| static struct attribute *hdaps_attributes[] = { | |
| &dev_attr_position.attr, | |
| &dev_attr_variance.attr, | |
| &dev_attr_temp1.attr, | |
| &dev_attr_temp2.attr, | |
| &dev_attr_keyboard_activity.attr, | |
| &dev_attr_mouse_activity.attr, | |
| &dev_attr_calibrate.attr, | |
| &dev_attr_invert.attr, | |
| NULL, | |
| }; | |
| static struct attribute_group hdaps_attribute_group = { | |
| .attrs = hdaps_attributes, | |
| }; | |
| /* Module stuff */ | |
| /* hdaps_dmi_match - found a match. return one, short-circuiting the hunt. */ | |
| static int __init hdaps_dmi_match(const struct dmi_system_id *id) | |
| { | |
| pr_info("%s detected\n", id->ident); | |
| return 1; | |
| } | |
| /* hdaps_dmi_match_invert - found an inverted match. */ | |
| static int __init hdaps_dmi_match_invert(const struct dmi_system_id *id) | |
| { | |
| hdaps_invert = (unsigned long)id->driver_data; | |
| pr_info("inverting axis (%u) readings\n", hdaps_invert); | |
| return hdaps_dmi_match(id); | |
| } | |
| #define HDAPS_DMI_MATCH_INVERT(vendor, model, axes) { \ | |
| .ident = vendor " " model, \ | |
| .callback = hdaps_dmi_match_invert, \ | |
| .driver_data = (void *)axes, \ | |
| .matches = { \ | |
| DMI_MATCH(DMI_BOARD_VENDOR, vendor), \ | |
| DMI_MATCH(DMI_PRODUCT_VERSION, model) \ | |
| } \ | |
| } | |
| #define HDAPS_DMI_MATCH_NORMAL(vendor, model) \ | |
| HDAPS_DMI_MATCH_INVERT(vendor, model, 0) | |
| /* Note that HDAPS_DMI_MATCH_NORMAL("ThinkPad T42") would match | |
| "ThinkPad T42p", so the order of the entries matters. | |
| If your ThinkPad is not recognized, please update to latest | |
| BIOS. This is especially the case for some R52 ThinkPads. */ | |
| static const struct dmi_system_id hdaps_whitelist[] __initconst = { | |
| HDAPS_DMI_MATCH_INVERT("IBM", "ThinkPad R50p", HDAPS_BOTH_AXES), | |
| HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad R50"), | |
| HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad R51"), | |
| HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad R52"), | |
| HDAPS_DMI_MATCH_INVERT("LENOVO", "ThinkPad R61i", HDAPS_BOTH_AXES), | |
| HDAPS_DMI_MATCH_INVERT("LENOVO", "ThinkPad R61", HDAPS_BOTH_AXES), | |
| HDAPS_DMI_MATCH_INVERT("IBM", "ThinkPad T41p", HDAPS_BOTH_AXES), | |
| HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad T41"), | |
| HDAPS_DMI_MATCH_INVERT("IBM", "ThinkPad T42p", HDAPS_BOTH_AXES), | |
| HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad T42"), | |
| HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad T43"), | |
| HDAPS_DMI_MATCH_INVERT("LENOVO", "ThinkPad T400", HDAPS_BOTH_AXES), | |
| HDAPS_DMI_MATCH_INVERT("LENOVO", "ThinkPad T60", HDAPS_BOTH_AXES), | |
| HDAPS_DMI_MATCH_INVERT("LENOVO", "ThinkPad T61p", HDAPS_BOTH_AXES), | |
| HDAPS_DMI_MATCH_INVERT("LENOVO", "ThinkPad T61", HDAPS_BOTH_AXES), | |
| HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad X40"), | |
| HDAPS_DMI_MATCH_INVERT("IBM", "ThinkPad X41", HDAPS_Y_AXIS), | |
| HDAPS_DMI_MATCH_INVERT("LENOVO", "ThinkPad X60", HDAPS_BOTH_AXES), | |
| HDAPS_DMI_MATCH_INVERT("LENOVO", "ThinkPad X61s", HDAPS_BOTH_AXES), | |
| HDAPS_DMI_MATCH_INVERT("LENOVO", "ThinkPad X61", HDAPS_BOTH_AXES), | |
| HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad Z60m"), | |
| HDAPS_DMI_MATCH_INVERT("LENOVO", "ThinkPad Z61m", HDAPS_BOTH_AXES), | |
| HDAPS_DMI_MATCH_INVERT("LENOVO", "ThinkPad Z61p", HDAPS_BOTH_AXES), | |
| { .ident = NULL } | |
| }; | |
| static int __init hdaps_init(void) | |
| { | |
| int ret; | |
| if (!dmi_check_system(hdaps_whitelist)) { | |
| pr_warn("supported laptop not found!\n"); | |
| ret = -ENODEV; | |
| goto out; | |
| } | |
| if (!request_region(HDAPS_LOW_PORT, HDAPS_NR_PORTS, "hdaps")) { | |
| ret = -ENXIO; | |
| goto out; | |
| } | |
| ret = platform_driver_register(&hdaps_driver); | |
| if (ret) | |
| goto out_region; | |
| pdev = platform_device_register_simple("hdaps", -1, NULL, 0); | |
| if (IS_ERR(pdev)) { | |
| ret = PTR_ERR(pdev); | |
| goto out_driver; | |
| } | |
| ret = sysfs_create_group(&pdev->dev.kobj, &hdaps_attribute_group); | |
| if (ret) | |
| goto out_device; | |
| hdaps_idev = input_allocate_device(); | |
| if (!hdaps_idev) { | |
| ret = -ENOMEM; | |
| goto out_group; | |
| } | |
| /* initial calibrate for the input device */ | |
| hdaps_calibrate(); | |
| /* initialize the input class */ | |
| hdaps_idev->name = "hdaps"; | |
| hdaps_idev->phys = "isa1600/input0"; | |
| hdaps_idev->id.bustype = BUS_ISA; | |
| hdaps_idev->dev.parent = &pdev->dev; | |
| input_set_abs_params(hdaps_idev, ABS_X, | |
| -256, 256, HDAPS_INPUT_FUZZ, HDAPS_INPUT_FLAT); | |
| input_set_abs_params(hdaps_idev, ABS_Y, | |
| -256, 256, HDAPS_INPUT_FUZZ, HDAPS_INPUT_FLAT); | |
| ret = input_setup_polling(hdaps_idev, hdaps_mousedev_poll); | |
| if (ret) | |
| goto out_idev; | |
| input_set_poll_interval(hdaps_idev, HDAPS_POLL_INTERVAL); | |
| ret = input_register_device(hdaps_idev); | |
| if (ret) | |
| goto out_idev; | |
| pr_info("driver successfully loaded\n"); | |
| return 0; | |
| out_idev: | |
| input_free_device(hdaps_idev); | |
| out_group: | |
| sysfs_remove_group(&pdev->dev.kobj, &hdaps_attribute_group); | |
| out_device: | |
| platform_device_unregister(pdev); | |
| out_driver: | |
| platform_driver_unregister(&hdaps_driver); | |
| out_region: | |
| release_region(HDAPS_LOW_PORT, HDAPS_NR_PORTS); | |
| out: | |
| pr_warn("driver init failed (ret=%d)!\n", ret); | |
| return ret; | |
| } | |
| static void __exit hdaps_exit(void) | |
| { | |
| input_unregister_device(hdaps_idev); | |
| sysfs_remove_group(&pdev->dev.kobj, &hdaps_attribute_group); | |
| platform_device_unregister(pdev); | |
| platform_driver_unregister(&hdaps_driver); | |
| release_region(HDAPS_LOW_PORT, HDAPS_NR_PORTS); | |
| pr_info("driver unloaded\n"); | |
| } | |
| module_init(hdaps_init); | |
| module_exit(hdaps_exit); | |
| module_param_named(invert, hdaps_invert, int, 0); | |
| MODULE_PARM_DESC(invert, "invert data along each axis. 1 invert x-axis, " | |
| "2 invert y-axis, 3 invert both axes."); | |
| MODULE_AUTHOR("Robert Love"); | |
| MODULE_DESCRIPTION("IBM Hard Drive Active Protection System (HDAPS) driver"); | |
| MODULE_LICENSE("GPL v2"); |