| /* | |
| * drivers/video/asiliantfb.c | |
| * frame buffer driver for Asiliant 69000 chip | |
| * Copyright (C) 2001-2003 Saito.K & Jeanne | |
| * | |
| * from driver/video/chipsfb.c and, | |
| * | |
| * drivers/video/asiliantfb.c -- frame buffer device for | |
| * Asiliant 69030 chip (formerly Intel, formerly Chips & Technologies) | |
| * Author: apc@agelectronics.co.uk | |
| * Copyright (C) 2000 AG Electronics | |
| * Note: the data sheets don't seem to be available from Asiliant. | |
| * They are available by searching developer.intel.com, but are not otherwise | |
| * linked to. | |
| * | |
| * This driver should be portable with minimal effort to the 69000 display | |
| * chip, and to the twin-display mode of the 69030. | |
| * Contains code from Thomas Hhenleitner <th@visuelle-maschinen.de> (thanks) | |
| * | |
| * Derived from the CT65550 driver chipsfb.c: | |
| * Copyright (C) 1998 Paul Mackerras | |
| * ...which was derived from the Powermac "chips" driver: | |
| * Copyright (C) 1997 Fabio Riccardi. | |
| * And from the frame buffer device for Open Firmware-initialized devices: | |
| * Copyright (C) 1997 Geert Uytterhoeven. | |
| * | |
| * This file is subject to the terms and conditions of the GNU General Public | |
| * License. See the file COPYING in the main directory of this archive for | |
| * more details. | |
| */ | |
| #include <linux/module.h> | |
| #include <linux/kernel.h> | |
| #include <linux/errno.h> | |
| #include <linux/string.h> | |
| #include <linux/mm.h> | |
| #include <linux/vmalloc.h> | |
| #include <linux/delay.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/fb.h> | |
| #include <linux/init.h> | |
| #include <linux/pci.h> | |
| #include <asm/io.h> | |
| /* Built in clock of the 69030 */ | |
| static const unsigned Fref = 14318180; | |
| #define mmio_base (p->screen_base + 0x400000) | |
| #define mm_write_ind(num, val, ap, dp) do { \ | |
| writeb((num), mmio_base + (ap)); writeb((val), mmio_base + (dp)); \ | |
| } while (0) | |
| static void mm_write_xr(struct fb_info *p, u8 reg, u8 data) | |
| { | |
| mm_write_ind(reg, data, 0x7ac, 0x7ad); | |
| } | |
| #define write_xr(num, val) mm_write_xr(p, num, val) | |
| static void mm_write_fr(struct fb_info *p, u8 reg, u8 data) | |
| { | |
| mm_write_ind(reg, data, 0x7a0, 0x7a1); | |
| } | |
| #define write_fr(num, val) mm_write_fr(p, num, val) | |
| static void mm_write_cr(struct fb_info *p, u8 reg, u8 data) | |
| { | |
| mm_write_ind(reg, data, 0x7a8, 0x7a9); | |
| } | |
| #define write_cr(num, val) mm_write_cr(p, num, val) | |
| static void mm_write_gr(struct fb_info *p, u8 reg, u8 data) | |
| { | |
| mm_write_ind(reg, data, 0x79c, 0x79d); | |
| } | |
| #define write_gr(num, val) mm_write_gr(p, num, val) | |
| static void mm_write_sr(struct fb_info *p, u8 reg, u8 data) | |
| { | |
| mm_write_ind(reg, data, 0x788, 0x789); | |
| } | |
| #define write_sr(num, val) mm_write_sr(p, num, val) | |
| static void mm_write_ar(struct fb_info *p, u8 reg, u8 data) | |
| { | |
| readb(mmio_base + 0x7b4); | |
| mm_write_ind(reg, data, 0x780, 0x780); | |
| } | |
| #define write_ar(num, val) mm_write_ar(p, num, val) | |
| static int asiliantfb_pci_init(struct pci_dev *dp, const struct pci_device_id *); | |
| static int asiliantfb_check_var(struct fb_var_screeninfo *var, | |
| struct fb_info *info); | |
| static int asiliantfb_set_par(struct fb_info *info); | |
| static int asiliantfb_setcolreg(u_int regno, u_int red, u_int green, u_int blue, | |
| u_int transp, struct fb_info *info); | |
| static const struct fb_ops asiliantfb_ops = { | |
| .owner = THIS_MODULE, | |
| .fb_check_var = asiliantfb_check_var, | |
| .fb_set_par = asiliantfb_set_par, | |
| .fb_setcolreg = asiliantfb_setcolreg, | |
| .fb_fillrect = cfb_fillrect, | |
| .fb_copyarea = cfb_copyarea, | |
| .fb_imageblit = cfb_imageblit, | |
| }; | |
| /* Calculate the ratios for the dot clocks without using a single long long | |
| * value */ | |
| static void asiliant_calc_dclk2(u32 *ppixclock, u8 *dclk2_m, u8 *dclk2_n, u8 *dclk2_div) | |
| { | |
| unsigned pixclock = *ppixclock; | |
| unsigned Ftarget = 1000000 * (1000000 / pixclock); | |
| unsigned n; | |
| unsigned best_error = 0xffffffff; | |
| unsigned best_m = 0xffffffff, | |
| best_n = 0xffffffff; | |
| unsigned ratio; | |
| unsigned remainder; | |
| unsigned char divisor = 0; | |
| /* Calculate the frequency required. This is hard enough. */ | |
| ratio = 1000000 / pixclock; | |
| remainder = 1000000 % pixclock; | |
| Ftarget = 1000000 * ratio + (1000000 * remainder) / pixclock; | |
| while (Ftarget < 100000000) { | |
| divisor += 0x10; | |
| Ftarget <<= 1; | |
| } | |
| ratio = Ftarget / Fref; | |
| remainder = Ftarget % Fref; | |
| /* This expresses the constraint that 150kHz <= Fref/n <= 5Mhz, | |
| * together with 3 <= n <= 257. */ | |
| for (n = 3; n <= 257; n++) { | |
| unsigned m = n * ratio + (n * remainder) / Fref; | |
| /* 3 <= m <= 257 */ | |
| if (m >= 3 && m <= 257) { | |
| unsigned new_error = Ftarget * n >= Fref * m ? | |
| ((Ftarget * n) - (Fref * m)) : ((Fref * m) - (Ftarget * n)); | |
| if (new_error < best_error) { | |
| best_n = n; | |
| best_m = m; | |
| best_error = new_error; | |
| } | |
| } | |
| /* But if VLD = 4, then 4m <= 1028 */ | |
| else if (m <= 1028) { | |
| /* remember there are still only 8-bits of precision in m, so | |
| * avoid over-optimistic error calculations */ | |
| unsigned new_error = Ftarget * n >= Fref * (m & ~3) ? | |
| ((Ftarget * n) - (Fref * (m & ~3))) : ((Fref * (m & ~3)) - (Ftarget * n)); | |
| if (new_error < best_error) { | |
| best_n = n; | |
| best_m = m; | |
| best_error = new_error; | |
| } | |
| } | |
| } | |
| if (best_m > 257) | |
| best_m >>= 2; /* divide m by 4, and leave VCO loop divide at 4 */ | |
| else | |
| divisor |= 4; /* or set VCO loop divide to 1 */ | |
| *dclk2_m = best_m - 2; | |
| *dclk2_n = best_n - 2; | |
| *dclk2_div = divisor; | |
| *ppixclock = pixclock; | |
| return; | |
| } | |
| static void asiliant_set_timing(struct fb_info *p) | |
| { | |
| unsigned hd = p->var.xres / 8; | |
| unsigned hs = (p->var.xres + p->var.right_margin) / 8; | |
| unsigned he = (p->var.xres + p->var.right_margin + p->var.hsync_len) / 8; | |
| unsigned ht = (p->var.left_margin + p->var.xres + p->var.right_margin + p->var.hsync_len) / 8; | |
| unsigned vd = p->var.yres; | |
| unsigned vs = p->var.yres + p->var.lower_margin; | |
| unsigned ve = p->var.yres + p->var.lower_margin + p->var.vsync_len; | |
| unsigned vt = p->var.upper_margin + p->var.yres + p->var.lower_margin + p->var.vsync_len; | |
| unsigned wd = (p->var.xres_virtual * ((p->var.bits_per_pixel+7)/8)) / 8; | |
| if ((p->var.xres == 640) && (p->var.yres == 480) && (p->var.pixclock == 39722)) { | |
| write_fr(0x01, 0x02); /* LCD */ | |
| } else { | |
| write_fr(0x01, 0x01); /* CRT */ | |
| } | |
| write_cr(0x11, (ve - 1) & 0x0f); | |
| write_cr(0x00, (ht - 5) & 0xff); | |
| write_cr(0x01, hd - 1); | |
| write_cr(0x02, hd); | |
| write_cr(0x03, ((ht - 1) & 0x1f) | 0x80); | |
| write_cr(0x04, hs); | |
| write_cr(0x05, (((ht - 1) & 0x20) <<2) | (he & 0x1f)); | |
| write_cr(0x3c, (ht - 1) & 0xc0); | |
| write_cr(0x06, (vt - 2) & 0xff); | |
| write_cr(0x30, (vt - 2) >> 8); | |
| write_cr(0x07, 0x00); | |
| write_cr(0x08, 0x00); | |
| write_cr(0x09, 0x00); | |
| write_cr(0x10, (vs - 1) & 0xff); | |
| write_cr(0x32, ((vs - 1) >> 8) & 0xf); | |
| write_cr(0x11, ((ve - 1) & 0x0f) | 0x80); | |
| write_cr(0x12, (vd - 1) & 0xff); | |
| write_cr(0x31, ((vd - 1) & 0xf00) >> 8); | |
| write_cr(0x13, wd & 0xff); | |
| write_cr(0x41, (wd & 0xf00) >> 8); | |
| write_cr(0x15, (vs - 1) & 0xff); | |
| write_cr(0x33, ((vs - 1) >> 8) & 0xf); | |
| write_cr(0x38, ((ht - 5) & 0x100) >> 8); | |
| write_cr(0x16, (vt - 1) & 0xff); | |
| write_cr(0x18, 0x00); | |
| if (p->var.xres == 640) { | |
| writeb(0xc7, mmio_base + 0x784); /* set misc output reg */ | |
| } else { | |
| writeb(0x07, mmio_base + 0x784); /* set misc output reg */ | |
| } | |
| } | |
| static int asiliantfb_check_var(struct fb_var_screeninfo *var, | |
| struct fb_info *p) | |
| { | |
| unsigned long Ftarget, ratio, remainder; | |
| ratio = 1000000 / var->pixclock; | |
| remainder = 1000000 % var->pixclock; | |
| Ftarget = 1000000 * ratio + (1000000 * remainder) / var->pixclock; | |
| /* First check the constraint that the maximum post-VCO divisor is 32, | |
| * and the maximum Fvco is 220MHz */ | |
| if (Ftarget > 220000000 || Ftarget < 3125000) { | |
| printk(KERN_ERR "asiliantfb dotclock must be between 3.125 and 220MHz\n"); | |
| return -ENXIO; | |
| } | |
| var->xres_virtual = var->xres; | |
| var->yres_virtual = var->yres; | |
| if (var->bits_per_pixel == 24) { | |
| var->red.offset = 16; | |
| var->green.offset = 8; | |
| var->blue.offset = 0; | |
| var->red.length = var->blue.length = var->green.length = 8; | |
| } else if (var->bits_per_pixel == 16) { | |
| switch (var->red.offset) { | |
| case 11: | |
| var->green.length = 6; | |
| break; | |
| case 10: | |
| var->green.length = 5; | |
| break; | |
| default: | |
| return -EINVAL; | |
| } | |
| var->green.offset = 5; | |
| var->blue.offset = 0; | |
| var->red.length = var->blue.length = 5; | |
| } else if (var->bits_per_pixel == 8) { | |
| var->red.offset = var->green.offset = var->blue.offset = 0; | |
| var->red.length = var->green.length = var->blue.length = 8; | |
| } | |
| return 0; | |
| } | |
| static int asiliantfb_set_par(struct fb_info *p) | |
| { | |
| u8 dclk2_m; /* Holds m-2 value for register */ | |
| u8 dclk2_n; /* Holds n-2 value for register */ | |
| u8 dclk2_div; /* Holds divisor bitmask */ | |
| /* Set pixclock */ | |
| asiliant_calc_dclk2(&p->var.pixclock, &dclk2_m, &dclk2_n, &dclk2_div); | |
| /* Set color depth */ | |
| if (p->var.bits_per_pixel == 24) { | |
| write_xr(0x81, 0x16); /* 24 bit packed color mode */ | |
| write_xr(0x82, 0x00); /* Disable palettes */ | |
| write_xr(0x20, 0x20); /* 24 bit blitter mode */ | |
| } else if (p->var.bits_per_pixel == 16) { | |
| if (p->var.red.offset == 11) | |
| write_xr(0x81, 0x15); /* 16 bit color mode */ | |
| else | |
| write_xr(0x81, 0x14); /* 15 bit color mode */ | |
| write_xr(0x82, 0x00); /* Disable palettes */ | |
| write_xr(0x20, 0x10); /* 16 bit blitter mode */ | |
| } else if (p->var.bits_per_pixel == 8) { | |
| write_xr(0x0a, 0x02); /* Linear */ | |
| write_xr(0x81, 0x12); /* 8 bit color mode */ | |
| write_xr(0x82, 0x00); /* Graphics gamma enable */ | |
| write_xr(0x20, 0x00); /* 8 bit blitter mode */ | |
| } | |
| p->fix.line_length = p->var.xres * (p->var.bits_per_pixel >> 3); | |
| p->fix.visual = (p->var.bits_per_pixel == 8) ? FB_VISUAL_PSEUDOCOLOR : FB_VISUAL_TRUECOLOR; | |
| write_xr(0xc4, dclk2_m); | |
| write_xr(0xc5, dclk2_n); | |
| write_xr(0xc7, dclk2_div); | |
| /* Set up the CR registers */ | |
| asiliant_set_timing(p); | |
| return 0; | |
| } | |
| static int asiliantfb_setcolreg(u_int regno, u_int red, u_int green, u_int blue, | |
| u_int transp, struct fb_info *p) | |
| { | |
| if (regno > 255) | |
| return 1; | |
| red >>= 8; | |
| green >>= 8; | |
| blue >>= 8; | |
| /* Set hardware palete */ | |
| writeb(regno, mmio_base + 0x790); | |
| udelay(1); | |
| writeb(red, mmio_base + 0x791); | |
| writeb(green, mmio_base + 0x791); | |
| writeb(blue, mmio_base + 0x791); | |
| if (regno < 16) { | |
| switch(p->var.red.offset) { | |
| case 10: /* RGB 555 */ | |
| ((u32 *)(p->pseudo_palette))[regno] = | |
| ((red & 0xf8) << 7) | | |
| ((green & 0xf8) << 2) | | |
| ((blue & 0xf8) >> 3); | |
| break; | |
| case 11: /* RGB 565 */ | |
| ((u32 *)(p->pseudo_palette))[regno] = | |
| ((red & 0xf8) << 8) | | |
| ((green & 0xfc) << 3) | | |
| ((blue & 0xf8) >> 3); | |
| break; | |
| case 16: /* RGB 888 */ | |
| ((u32 *)(p->pseudo_palette))[regno] = | |
| (red << 16) | | |
| (green << 8) | | |
| (blue); | |
| break; | |
| } | |
| } | |
| return 0; | |
| } | |
| struct chips_init_reg { | |
| unsigned char addr; | |
| unsigned char data; | |
| }; | |
| static struct chips_init_reg chips_init_sr[] = | |
| { | |
| {0x00, 0x03}, /* Reset register */ | |
| {0x01, 0x01}, /* Clocking mode */ | |
| {0x02, 0x0f}, /* Plane mask */ | |
| {0x04, 0x0e} /* Memory mode */ | |
| }; | |
| static struct chips_init_reg chips_init_gr[] = | |
| { | |
| {0x03, 0x00}, /* Data rotate */ | |
| {0x05, 0x00}, /* Graphics mode */ | |
| {0x06, 0x01}, /* Miscellaneous */ | |
| {0x08, 0x00} /* Bit mask */ | |
| }; | |
| static struct chips_init_reg chips_init_ar[] = | |
| { | |
| {0x10, 0x01}, /* Mode control */ | |
| {0x11, 0x00}, /* Overscan */ | |
| {0x12, 0x0f}, /* Memory plane enable */ | |
| {0x13, 0x00} /* Horizontal pixel panning */ | |
| }; | |
| static struct chips_init_reg chips_init_cr[] = | |
| { | |
| {0x0c, 0x00}, /* Start address high */ | |
| {0x0d, 0x00}, /* Start address low */ | |
| {0x40, 0x00}, /* Extended Start Address */ | |
| {0x41, 0x00}, /* Extended Start Address */ | |
| {0x14, 0x00}, /* Underline location */ | |
| {0x17, 0xe3}, /* CRT mode control */ | |
| {0x70, 0x00} /* Interlace control */ | |
| }; | |
| static struct chips_init_reg chips_init_fr[] = | |
| { | |
| {0x01, 0x02}, | |
| {0x03, 0x08}, | |
| {0x08, 0xcc}, | |
| {0x0a, 0x08}, | |
| {0x18, 0x00}, | |
| {0x1e, 0x80}, | |
| {0x40, 0x83}, | |
| {0x41, 0x00}, | |
| {0x48, 0x13}, | |
| {0x4d, 0x60}, | |
| {0x4e, 0x0f}, | |
| {0x0b, 0x01}, | |
| {0x21, 0x51}, | |
| {0x22, 0x1d}, | |
| {0x23, 0x5f}, | |
| {0x20, 0x4f}, | |
| {0x34, 0x00}, | |
| {0x24, 0x51}, | |
| {0x25, 0x00}, | |
| {0x27, 0x0b}, | |
| {0x26, 0x00}, | |
| {0x37, 0x80}, | |
| {0x33, 0x0b}, | |
| {0x35, 0x11}, | |
| {0x36, 0x02}, | |
| {0x31, 0xea}, | |
| {0x32, 0x0c}, | |
| {0x30, 0xdf}, | |
| {0x10, 0x0c}, | |
| {0x11, 0xe0}, | |
| {0x12, 0x50}, | |
| {0x13, 0x00}, | |
| {0x16, 0x03}, | |
| {0x17, 0xbd}, | |
| {0x1a, 0x00}, | |
| }; | |
| static struct chips_init_reg chips_init_xr[] = | |
| { | |
| {0xce, 0x00}, /* set default memory clock */ | |
| {0xcc, 200 }, /* MCLK ratio M */ | |
| {0xcd, 18 }, /* MCLK ratio N */ | |
| {0xce, 0x90}, /* MCLK divisor = 2 */ | |
| {0xc4, 209 }, | |
| {0xc5, 118 }, | |
| {0xc7, 32 }, | |
| {0xcf, 0x06}, | |
| {0x09, 0x01}, /* IO Control - CRT controller extensions */ | |
| {0x0a, 0x02}, /* Frame buffer mapping */ | |
| {0x0b, 0x01}, /* PCI burst write */ | |
| {0x40, 0x03}, /* Memory access control */ | |
| {0x80, 0x82}, /* Pixel pipeline configuration 0 */ | |
| {0x81, 0x12}, /* Pixel pipeline configuration 1 */ | |
| {0x82, 0x08}, /* Pixel pipeline configuration 2 */ | |
| {0xd0, 0x0f}, | |
| {0xd1, 0x01}, | |
| }; | |
| static void chips_hw_init(struct fb_info *p) | |
| { | |
| int i; | |
| for (i = 0; i < ARRAY_SIZE(chips_init_xr); ++i) | |
| write_xr(chips_init_xr[i].addr, chips_init_xr[i].data); | |
| write_xr(0x81, 0x12); | |
| write_xr(0x82, 0x08); | |
| write_xr(0x20, 0x00); | |
| for (i = 0; i < ARRAY_SIZE(chips_init_sr); ++i) | |
| write_sr(chips_init_sr[i].addr, chips_init_sr[i].data); | |
| for (i = 0; i < ARRAY_SIZE(chips_init_gr); ++i) | |
| write_gr(chips_init_gr[i].addr, chips_init_gr[i].data); | |
| for (i = 0; i < ARRAY_SIZE(chips_init_ar); ++i) | |
| write_ar(chips_init_ar[i].addr, chips_init_ar[i].data); | |
| /* Enable video output in attribute index register */ | |
| writeb(0x20, mmio_base + 0x780); | |
| for (i = 0; i < ARRAY_SIZE(chips_init_cr); ++i) | |
| write_cr(chips_init_cr[i].addr, chips_init_cr[i].data); | |
| for (i = 0; i < ARRAY_SIZE(chips_init_fr); ++i) | |
| write_fr(chips_init_fr[i].addr, chips_init_fr[i].data); | |
| } | |
| static const struct fb_fix_screeninfo asiliantfb_fix = { | |
| .id = "Asiliant 69000", | |
| .type = FB_TYPE_PACKED_PIXELS, | |
| .visual = FB_VISUAL_PSEUDOCOLOR, | |
| .accel = FB_ACCEL_NONE, | |
| .line_length = 640, | |
| .smem_len = 0x200000, /* 2MB */ | |
| }; | |
| static const struct fb_var_screeninfo asiliantfb_var = { | |
| .xres = 640, | |
| .yres = 480, | |
| .xres_virtual = 640, | |
| .yres_virtual = 480, | |
| .bits_per_pixel = 8, | |
| .red = { .length = 8 }, | |
| .green = { .length = 8 }, | |
| .blue = { .length = 8 }, | |
| .height = -1, | |
| .width = -1, | |
| .vmode = FB_VMODE_NONINTERLACED, | |
| .pixclock = 39722, | |
| .left_margin = 48, | |
| .right_margin = 16, | |
| .upper_margin = 33, | |
| .lower_margin = 10, | |
| .hsync_len = 96, | |
| .vsync_len = 2, | |
| }; | |
| static int init_asiliant(struct fb_info *p, unsigned long addr) | |
| { | |
| int err; | |
| p->fix = asiliantfb_fix; | |
| p->fix.smem_start = addr; | |
| p->var = asiliantfb_var; | |
| p->fbops = &asiliantfb_ops; | |
| p->flags = FBINFO_DEFAULT; | |
| err = fb_alloc_cmap(&p->cmap, 256, 0); | |
| if (err) { | |
| printk(KERN_ERR "C&T 69000 fb failed to alloc cmap memory\n"); | |
| return err; | |
| } | |
| err = register_framebuffer(p); | |
| if (err < 0) { | |
| printk(KERN_ERR "C&T 69000 framebuffer failed to register\n"); | |
| fb_dealloc_cmap(&p->cmap); | |
| return err; | |
| } | |
| fb_info(p, "Asiliant 69000 frame buffer (%dK RAM detected)\n", | |
| p->fix.smem_len / 1024); | |
| writeb(0xff, mmio_base + 0x78c); | |
| chips_hw_init(p); | |
| return 0; | |
| } | |
| static int asiliantfb_pci_init(struct pci_dev *dp, | |
| const struct pci_device_id *ent) | |
| { | |
| unsigned long addr, size; | |
| struct fb_info *p; | |
| int err; | |
| if ((dp->resource[0].flags & IORESOURCE_MEM) == 0) | |
| return -ENODEV; | |
| addr = pci_resource_start(dp, 0); | |
| size = pci_resource_len(dp, 0); | |
| if (addr == 0) | |
| return -ENODEV; | |
| if (!request_mem_region(addr, size, "asiliantfb")) | |
| return -EBUSY; | |
| p = framebuffer_alloc(sizeof(u32) * 16, &dp->dev); | |
| if (!p) { | |
| release_mem_region(addr, size); | |
| return -ENOMEM; | |
| } | |
| p->pseudo_palette = p->par; | |
| p->par = NULL; | |
| p->screen_base = ioremap(addr, 0x800000); | |
| if (p->screen_base == NULL) { | |
| release_mem_region(addr, size); | |
| framebuffer_release(p); | |
| return -ENOMEM; | |
| } | |
| pci_write_config_dword(dp, 4, 0x02800083); | |
| writeb(3, p->screen_base + 0x400784); | |
| err = init_asiliant(p, addr); | |
| if (err) { | |
| iounmap(p->screen_base); | |
| release_mem_region(addr, size); | |
| framebuffer_release(p); | |
| return err; | |
| } | |
| pci_set_drvdata(dp, p); | |
| return 0; | |
| } | |
| static void asiliantfb_remove(struct pci_dev *dp) | |
| { | |
| struct fb_info *p = pci_get_drvdata(dp); | |
| unregister_framebuffer(p); | |
| fb_dealloc_cmap(&p->cmap); | |
| iounmap(p->screen_base); | |
| release_mem_region(pci_resource_start(dp, 0), pci_resource_len(dp, 0)); | |
| framebuffer_release(p); | |
| } | |
| static const struct pci_device_id asiliantfb_pci_tbl[] = { | |
| { PCI_VENDOR_ID_CT, PCI_DEVICE_ID_CT_69000, PCI_ANY_ID, PCI_ANY_ID }, | |
| { 0 } | |
| }; | |
| MODULE_DEVICE_TABLE(pci, asiliantfb_pci_tbl); | |
| static struct pci_driver asiliantfb_driver = { | |
| .name = "asiliantfb", | |
| .id_table = asiliantfb_pci_tbl, | |
| .probe = asiliantfb_pci_init, | |
| .remove = asiliantfb_remove, | |
| }; | |
| static int __init asiliantfb_init(void) | |
| { | |
| if (fb_get_options("asiliantfb", NULL)) | |
| return -ENODEV; | |
| return pci_register_driver(&asiliantfb_driver); | |
| } | |
| module_init(asiliantfb_init); | |
| static void __exit asiliantfb_exit(void) | |
| { | |
| pci_unregister_driver(&asiliantfb_driver); | |
| } | |
| MODULE_LICENSE("GPL"); |