| /* | |
| * linux/drivers/video/vga16.c -- VGA 16-color framebuffer driver | |
| * | |
| * Copyright 1999 Ben Pfaff <pfaffben@debian.org> and Petr Vandrovec <VANDROVE@vc.cvut.cz> | |
| * Based on VGA info at http://www.goodnet.com/~tinara/FreeVGA/home.htm | |
| * Based on VESA framebuffer (c) 1998 Gerd Knorr <kraxel@goldbach.in-berlin.de> | |
| * | |
| * This file is subject to the terms and conditions of the GNU General | |
| * Public License. See the file COPYING in the main directory of this | |
| * archive for more details. | |
| */ | |
| #include <linux/module.h> | |
| #include <linux/kernel.h> | |
| #include <linux/errno.h> | |
| #include <linux/string.h> | |
| #include <linux/mm.h> | |
| #include <linux/delay.h> | |
| #include <linux/fb.h> | |
| #include <linux/ioport.h> | |
| #include <linux/init.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/screen_info.h> | |
| #include <asm/io.h> | |
| #include <video/vga.h> | |
| #define VGA_FB_PHYS 0xA0000 | |
| #define VGA_FB_PHYS_LEN 65536 | |
| #define MODE_SKIP4 1 | |
| #define MODE_8BPP 2 | |
| #define MODE_CFB 4 | |
| #define MODE_TEXT 8 | |
| /* --------------------------------------------------------------------- */ | |
| /* | |
| * card parameters | |
| */ | |
| struct vga16fb_par { | |
| /* structure holding original VGA register settings when the | |
| screen is blanked */ | |
| struct { | |
| unsigned char SeqCtrlIndex; /* Sequencer Index reg. */ | |
| unsigned char CrtCtrlIndex; /* CRT-Contr. Index reg. */ | |
| unsigned char CrtMiscIO; /* Miscellaneous register */ | |
| unsigned char HorizontalTotal; /* CRT-Controller:00h */ | |
| unsigned char HorizDisplayEnd; /* CRT-Controller:01h */ | |
| unsigned char StartHorizRetrace;/* CRT-Controller:04h */ | |
| unsigned char EndHorizRetrace; /* CRT-Controller:05h */ | |
| unsigned char Overflow; /* CRT-Controller:07h */ | |
| unsigned char StartVertRetrace; /* CRT-Controller:10h */ | |
| unsigned char EndVertRetrace; /* CRT-Controller:11h */ | |
| unsigned char ModeControl; /* CRT-Controller:17h */ | |
| unsigned char ClockingMode; /* Seq-Controller:01h */ | |
| } vga_state; | |
| struct vgastate state; | |
| unsigned int ref_count; | |
| int palette_blanked, vesa_blanked, mode, isVGA; | |
| u8 misc, pel_msk, vss, clkdiv; | |
| u8 crtc[VGA_CRT_C]; | |
| }; | |
| /* --------------------------------------------------------------------- */ | |
| static struct fb_var_screeninfo vga16fb_defined = { | |
| .xres = 640, | |
| .yres = 480, | |
| .xres_virtual = 640, | |
| .yres_virtual = 480, | |
| .bits_per_pixel = 4, | |
| .activate = FB_ACTIVATE_TEST, | |
| .height = -1, | |
| .width = -1, | |
| .pixclock = 39721, | |
| .left_margin = 48, | |
| .right_margin = 16, | |
| .upper_margin = 33, | |
| .lower_margin = 10, | |
| .hsync_len = 96, | |
| .vsync_len = 2, | |
| .vmode = FB_VMODE_NONINTERLACED, | |
| }; | |
| /* name should not depend on EGA/VGA */ | |
| static const struct fb_fix_screeninfo vga16fb_fix = { | |
| .id = "VGA16 VGA", | |
| .smem_start = VGA_FB_PHYS, | |
| .smem_len = VGA_FB_PHYS_LEN, | |
| .type = FB_TYPE_VGA_PLANES, | |
| .type_aux = FB_AUX_VGA_PLANES_VGA4, | |
| .visual = FB_VISUAL_PSEUDOCOLOR, | |
| .xpanstep = 8, | |
| .ypanstep = 1, | |
| .line_length = 640 / 8, | |
| .accel = FB_ACCEL_NONE | |
| }; | |
| /* The VGA's weird architecture often requires that we read a byte and | |
| write a byte to the same location. It doesn't matter *what* byte | |
| we write, however. This is because all the action goes on behind | |
| the scenes in the VGA's 32-bit latch register, and reading and writing | |
| video memory just invokes latch behavior. | |
| To avoid race conditions (is this necessary?), reading and writing | |
| the memory byte should be done with a single instruction. One | |
| suitable instruction is the x86 bitwise OR. The following | |
| read-modify-write routine should optimize to one such bitwise | |
| OR. */ | |
| static inline void rmw(volatile char __iomem *p) | |
| { | |
| readb(p); | |
| writeb(1, p); | |
| } | |
| /* Set the Graphics Mode Register, and return its previous value. | |
| Bits 0-1 are write mode, bit 3 is read mode. */ | |
| static inline int setmode(int mode) | |
| { | |
| int oldmode; | |
| oldmode = vga_io_rgfx(VGA_GFX_MODE); | |
| vga_io_w(VGA_GFX_D, mode); | |
| return oldmode; | |
| } | |
| /* Select the Bit Mask Register and return its value. */ | |
| static inline int selectmask(void) | |
| { | |
| return vga_io_rgfx(VGA_GFX_BIT_MASK); | |
| } | |
| /* Set the value of the Bit Mask Register. It must already have been | |
| selected with selectmask(). */ | |
| static inline void setmask(int mask) | |
| { | |
| vga_io_w(VGA_GFX_D, mask); | |
| } | |
| /* Set the Data Rotate Register and return its old value. | |
| Bits 0-2 are rotate count, bits 3-4 are logical operation | |
| (0=NOP, 1=AND, 2=OR, 3=XOR). */ | |
| static inline int setop(int op) | |
| { | |
| int oldop; | |
| oldop = vga_io_rgfx(VGA_GFX_DATA_ROTATE); | |
| vga_io_w(VGA_GFX_D, op); | |
| return oldop; | |
| } | |
| /* Set the Enable Set/Reset Register and return its old value. | |
| The code here always uses value 0xf for this register. */ | |
| static inline int setsr(int sr) | |
| { | |
| int oldsr; | |
| oldsr = vga_io_rgfx(VGA_GFX_SR_ENABLE); | |
| vga_io_w(VGA_GFX_D, sr); | |
| return oldsr; | |
| } | |
| /* Set the Set/Reset Register and return its old value. */ | |
| static inline int setcolor(int color) | |
| { | |
| int oldcolor; | |
| oldcolor = vga_io_rgfx(VGA_GFX_SR_VALUE); | |
| vga_io_w(VGA_GFX_D, color); | |
| return oldcolor; | |
| } | |
| /* Return the value in the Graphics Address Register. */ | |
| static inline int getindex(void) | |
| { | |
| return vga_io_r(VGA_GFX_I); | |
| } | |
| /* Set the value in the Graphics Address Register. */ | |
| static inline void setindex(int index) | |
| { | |
| vga_io_w(VGA_GFX_I, index); | |
| } | |
| static void vga16fb_pan_var(struct fb_info *info, | |
| struct fb_var_screeninfo *var) | |
| { | |
| struct vga16fb_par *par = info->par; | |
| u32 xoffset, pos; | |
| xoffset = var->xoffset; | |
| if (info->var.bits_per_pixel == 8) { | |
| pos = (info->var.xres_virtual * var->yoffset + xoffset) >> 2; | |
| } else if (par->mode & MODE_TEXT) { | |
| int fh = 16; // FIXME !!! font height. Fugde for now. | |
| pos = (info->var.xres_virtual * (var->yoffset / fh) + xoffset) >> 3; | |
| } else { | |
| if (info->var.nonstd) | |
| xoffset--; | |
| pos = (info->var.xres_virtual * var->yoffset + xoffset) >> 3; | |
| } | |
| vga_io_wcrt(VGA_CRTC_START_HI, pos >> 8); | |
| vga_io_wcrt(VGA_CRTC_START_LO, pos & 0xFF); | |
| /* if we support CFB4, then we must! support xoffset with pixel | |
| * granularity if someone supports xoffset in bit resolution */ | |
| vga_io_r(VGA_IS1_RC); /* reset flip-flop */ | |
| vga_io_w(VGA_ATT_IW, VGA_ATC_PEL); | |
| if (info->var.bits_per_pixel == 8) | |
| vga_io_w(VGA_ATT_IW, (xoffset & 3) << 1); | |
| else | |
| vga_io_w(VGA_ATT_IW, xoffset & 7); | |
| vga_io_r(VGA_IS1_RC); | |
| vga_io_w(VGA_ATT_IW, 0x20); | |
| } | |
| static void vga16fb_update_fix(struct fb_info *info) | |
| { | |
| if (info->var.bits_per_pixel == 4) { | |
| if (info->var.nonstd) { | |
| info->fix.type = FB_TYPE_PACKED_PIXELS; | |
| info->fix.line_length = info->var.xres_virtual / 2; | |
| } else { | |
| info->fix.type = FB_TYPE_VGA_PLANES; | |
| info->fix.type_aux = FB_AUX_VGA_PLANES_VGA4; | |
| info->fix.line_length = info->var.xres_virtual / 8; | |
| } | |
| } else if (info->var.bits_per_pixel == 0) { | |
| info->fix.type = FB_TYPE_TEXT; | |
| info->fix.type_aux = FB_AUX_TEXT_CGA; | |
| info->fix.line_length = info->var.xres_virtual / 4; | |
| } else { /* 8bpp */ | |
| if (info->var.nonstd) { | |
| info->fix.type = FB_TYPE_VGA_PLANES; | |
| info->fix.type_aux = FB_AUX_VGA_PLANES_CFB8; | |
| info->fix.line_length = info->var.xres_virtual / 4; | |
| } else { | |
| info->fix.type = FB_TYPE_PACKED_PIXELS; | |
| info->fix.line_length = info->var.xres_virtual; | |
| } | |
| } | |
| } | |
| static void vga16fb_clock_chip(struct vga16fb_par *par, | |
| unsigned int *pixclock, | |
| const struct fb_info *info, | |
| int mul, int div) | |
| { | |
| static const struct { | |
| u32 pixclock; | |
| u8 misc; | |
| u8 seq_clock_mode; | |
| } *ptr, *best, vgaclocks[] = { | |
| { 79442 /* 12.587 */, 0x00, 0x08}, | |
| { 70616 /* 14.161 */, 0x04, 0x08}, | |
| { 39721 /* 25.175 */, 0x00, 0x00}, | |
| { 35308 /* 28.322 */, 0x04, 0x00}, | |
| { 0 /* bad */, 0x00, 0x00}}; | |
| int err; | |
| *pixclock = (*pixclock * mul) / div; | |
| best = vgaclocks; | |
| err = *pixclock - best->pixclock; | |
| if (err < 0) err = -err; | |
| for (ptr = vgaclocks + 1; ptr->pixclock; ptr++) { | |
| int tmp; | |
| tmp = *pixclock - ptr->pixclock; | |
| if (tmp < 0) tmp = -tmp; | |
| if (tmp < err) { | |
| err = tmp; | |
| best = ptr; | |
| } | |
| } | |
| par->misc |= best->misc; | |
| par->clkdiv = best->seq_clock_mode; | |
| *pixclock = (best->pixclock * div) / mul; | |
| } | |
| #define FAIL(X) return -EINVAL | |
| static int vga16fb_open(struct fb_info *info, int user) | |
| { | |
| struct vga16fb_par *par = info->par; | |
| if (!par->ref_count) { | |
| memset(&par->state, 0, sizeof(struct vgastate)); | |
| par->state.flags = VGA_SAVE_FONTS | VGA_SAVE_MODE | | |
| VGA_SAVE_CMAP; | |
| save_vga(&par->state); | |
| } | |
| par->ref_count++; | |
| return 0; | |
| } | |
| static int vga16fb_release(struct fb_info *info, int user) | |
| { | |
| struct vga16fb_par *par = info->par; | |
| if (!par->ref_count) | |
| return -EINVAL; | |
| if (par->ref_count == 1) | |
| restore_vga(&par->state); | |
| par->ref_count--; | |
| return 0; | |
| } | |
| static int vga16fb_check_var(struct fb_var_screeninfo *var, | |
| struct fb_info *info) | |
| { | |
| struct vga16fb_par *par = info->par; | |
| u32 xres, right, hslen, left, xtotal; | |
| u32 yres, lower, vslen, upper, ytotal; | |
| u32 vxres, xoffset, vyres, yoffset; | |
| u32 pos; | |
| u8 r7, rMode; | |
| int shift; | |
| int mode; | |
| u32 maxmem; | |
| par->pel_msk = 0xFF; | |
| if (var->bits_per_pixel == 4) { | |
| if (var->nonstd) { | |
| if (!par->isVGA) | |
| return -EINVAL; | |
| shift = 3; | |
| mode = MODE_SKIP4 | MODE_CFB; | |
| maxmem = 16384; | |
| par->pel_msk = 0x0F; | |
| } else { | |
| shift = 3; | |
| mode = 0; | |
| maxmem = 65536; | |
| } | |
| } else if (var->bits_per_pixel == 8) { | |
| if (!par->isVGA) | |
| return -EINVAL; /* no support on EGA */ | |
| shift = 2; | |
| if (var->nonstd) { | |
| mode = MODE_8BPP | MODE_CFB; | |
| maxmem = 65536; | |
| } else { | |
| mode = MODE_SKIP4 | MODE_8BPP | MODE_CFB; | |
| maxmem = 16384; | |
| } | |
| } else | |
| return -EINVAL; | |
| xres = (var->xres + 7) & ~7; | |
| vxres = (var->xres_virtual + 0xF) & ~0xF; | |
| xoffset = (var->xoffset + 7) & ~7; | |
| left = (var->left_margin + 7) & ~7; | |
| right = (var->right_margin + 7) & ~7; | |
| hslen = (var->hsync_len + 7) & ~7; | |
| if (vxres < xres) | |
| vxres = xres; | |
| if (xres + xoffset > vxres) | |
| xoffset = vxres - xres; | |
| var->xres = xres; | |
| var->right_margin = right; | |
| var->hsync_len = hslen; | |
| var->left_margin = left; | |
| var->xres_virtual = vxres; | |
| var->xoffset = xoffset; | |
| xres >>= shift; | |
| right >>= shift; | |
| hslen >>= shift; | |
| left >>= shift; | |
| vxres >>= shift; | |
| xtotal = xres + right + hslen + left; | |
| if (xtotal >= 256) | |
| FAIL("xtotal too big"); | |
| if (hslen > 32) | |
| FAIL("hslen too big"); | |
| if (right + hslen + left > 64) | |
| FAIL("hblank too big"); | |
| par->crtc[VGA_CRTC_H_TOTAL] = xtotal - 5; | |
| par->crtc[VGA_CRTC_H_BLANK_START] = xres - 1; | |
| par->crtc[VGA_CRTC_H_DISP] = xres - 1; | |
| pos = xres + right; | |
| par->crtc[VGA_CRTC_H_SYNC_START] = pos; | |
| pos += hslen; | |
| par->crtc[VGA_CRTC_H_SYNC_END] = pos & 0x1F; | |
| pos += left - 2; /* blank_end + 2 <= total + 5 */ | |
| par->crtc[VGA_CRTC_H_BLANK_END] = (pos & 0x1F) | 0x80; | |
| if (pos & 0x20) | |
| par->crtc[VGA_CRTC_H_SYNC_END] |= 0x80; | |
| yres = var->yres; | |
| lower = var->lower_margin; | |
| vslen = var->vsync_len; | |
| upper = var->upper_margin; | |
| vyres = var->yres_virtual; | |
| yoffset = var->yoffset; | |
| if (yres > vyres) | |
| vyres = yres; | |
| if (vxres * vyres > maxmem) { | |
| vyres = maxmem / vxres; | |
| if (vyres < yres) | |
| return -ENOMEM; | |
| } | |
| if (yoffset + yres > vyres) | |
| yoffset = vyres - yres; | |
| var->yres = yres; | |
| var->lower_margin = lower; | |
| var->vsync_len = vslen; | |
| var->upper_margin = upper; | |
| var->yres_virtual = vyres; | |
| var->yoffset = yoffset; | |
| if (var->vmode & FB_VMODE_DOUBLE) { | |
| yres <<= 1; | |
| lower <<= 1; | |
| vslen <<= 1; | |
| upper <<= 1; | |
| } | |
| ytotal = yres + lower + vslen + upper; | |
| if (ytotal > 1024) { | |
| ytotal >>= 1; | |
| yres >>= 1; | |
| lower >>= 1; | |
| vslen >>= 1; | |
| upper >>= 1; | |
| rMode = 0x04; | |
| } else | |
| rMode = 0x00; | |
| if (ytotal > 1024) | |
| FAIL("ytotal too big"); | |
| if (vslen > 16) | |
| FAIL("vslen too big"); | |
| par->crtc[VGA_CRTC_V_TOTAL] = ytotal - 2; | |
| r7 = 0x10; /* disable linecompare */ | |
| if (ytotal & 0x100) r7 |= 0x01; | |
| if (ytotal & 0x200) r7 |= 0x20; | |
| par->crtc[VGA_CRTC_PRESET_ROW] = 0; | |
| par->crtc[VGA_CRTC_MAX_SCAN] = 0x40; /* 1 scanline, no linecmp */ | |
| if (var->vmode & FB_VMODE_DOUBLE) | |
| par->crtc[VGA_CRTC_MAX_SCAN] |= 0x80; | |
| par->crtc[VGA_CRTC_CURSOR_START] = 0x20; | |
| par->crtc[VGA_CRTC_CURSOR_END] = 0x00; | |
| if ((mode & (MODE_CFB | MODE_8BPP)) == MODE_CFB) | |
| xoffset--; | |
| pos = yoffset * vxres + (xoffset >> shift); | |
| par->crtc[VGA_CRTC_START_HI] = pos >> 8; | |
| par->crtc[VGA_CRTC_START_LO] = pos & 0xFF; | |
| par->crtc[VGA_CRTC_CURSOR_HI] = 0x00; | |
| par->crtc[VGA_CRTC_CURSOR_LO] = 0x00; | |
| pos = yres - 1; | |
| par->crtc[VGA_CRTC_V_DISP_END] = pos & 0xFF; | |
| par->crtc[VGA_CRTC_V_BLANK_START] = pos & 0xFF; | |
| if (pos & 0x100) | |
| r7 |= 0x0A; /* 0x02 -> DISP_END, 0x08 -> BLANK_START */ | |
| if (pos & 0x200) { | |
| r7 |= 0x40; /* 0x40 -> DISP_END */ | |
| par->crtc[VGA_CRTC_MAX_SCAN] |= 0x20; /* BLANK_START */ | |
| } | |
| pos += lower; | |
| par->crtc[VGA_CRTC_V_SYNC_START] = pos & 0xFF; | |
| if (pos & 0x100) | |
| r7 |= 0x04; | |
| if (pos & 0x200) | |
| r7 |= 0x80; | |
| pos += vslen; | |
| par->crtc[VGA_CRTC_V_SYNC_END] = (pos & 0x0F) & ~0x10; /* disabled IRQ */ | |
| pos += upper - 1; /* blank_end + 1 <= ytotal + 2 */ | |
| par->crtc[VGA_CRTC_V_BLANK_END] = pos & 0xFF; /* 0x7F for original VGA, | |
| but some SVGA chips requires all 8 bits to set */ | |
| if (vxres >= 512) | |
| FAIL("vxres too long"); | |
| par->crtc[VGA_CRTC_OFFSET] = vxres >> 1; | |
| if (mode & MODE_SKIP4) | |
| par->crtc[VGA_CRTC_UNDERLINE] = 0x5F; /* 256, cfb8 */ | |
| else | |
| par->crtc[VGA_CRTC_UNDERLINE] = 0x1F; /* 16, vgap */ | |
| par->crtc[VGA_CRTC_MODE] = rMode | ((mode & MODE_TEXT) ? 0xA3 : 0xE3); | |
| par->crtc[VGA_CRTC_LINE_COMPARE] = 0xFF; | |
| par->crtc[VGA_CRTC_OVERFLOW] = r7; | |
| par->vss = 0x00; /* 3DA */ | |
| par->misc = 0xE3; /* enable CPU, ports 0x3Dx, positive sync */ | |
| if (var->sync & FB_SYNC_HOR_HIGH_ACT) | |
| par->misc &= ~0x40; | |
| if (var->sync & FB_SYNC_VERT_HIGH_ACT) | |
| par->misc &= ~0x80; | |
| par->mode = mode; | |
| if (mode & MODE_8BPP) | |
| /* pixel clock == vga clock / 2 */ | |
| vga16fb_clock_chip(par, &var->pixclock, info, 1, 2); | |
| else | |
| /* pixel clock == vga clock */ | |
| vga16fb_clock_chip(par, &var->pixclock, info, 1, 1); | |
| var->red.offset = var->green.offset = var->blue.offset = | |
| var->transp.offset = 0; | |
| var->red.length = var->green.length = var->blue.length = | |
| (par->isVGA) ? 6 : 2; | |
| var->transp.length = 0; | |
| var->activate = FB_ACTIVATE_NOW; | |
| var->height = -1; | |
| var->width = -1; | |
| var->accel_flags = 0; | |
| return 0; | |
| } | |
| #undef FAIL | |
| static int vga16fb_set_par(struct fb_info *info) | |
| { | |
| struct vga16fb_par *par = info->par; | |
| u8 gdc[VGA_GFX_C]; | |
| u8 seq[VGA_SEQ_C]; | |
| u8 atc[VGA_ATT_C]; | |
| int fh, i; | |
| seq[VGA_SEQ_CLOCK_MODE] = 0x01 | par->clkdiv; | |
| if (par->mode & MODE_TEXT) | |
| seq[VGA_SEQ_PLANE_WRITE] = 0x03; | |
| else | |
| seq[VGA_SEQ_PLANE_WRITE] = 0x0F; | |
| seq[VGA_SEQ_CHARACTER_MAP] = 0x00; | |
| if (par->mode & MODE_TEXT) | |
| seq[VGA_SEQ_MEMORY_MODE] = 0x03; | |
| else if (par->mode & MODE_SKIP4) | |
| seq[VGA_SEQ_MEMORY_MODE] = 0x0E; | |
| else | |
| seq[VGA_SEQ_MEMORY_MODE] = 0x06; | |
| gdc[VGA_GFX_SR_VALUE] = 0x00; | |
| gdc[VGA_GFX_SR_ENABLE] = 0x00; | |
| gdc[VGA_GFX_COMPARE_VALUE] = 0x00; | |
| gdc[VGA_GFX_DATA_ROTATE] = 0x00; | |
| gdc[VGA_GFX_PLANE_READ] = 0; | |
| if (par->mode & MODE_TEXT) { | |
| gdc[VGA_GFX_MODE] = 0x10; | |
| gdc[VGA_GFX_MISC] = 0x06; | |
| } else { | |
| if (par->mode & MODE_CFB) | |
| gdc[VGA_GFX_MODE] = 0x40; | |
| else | |
| gdc[VGA_GFX_MODE] = 0x00; | |
| gdc[VGA_GFX_MISC] = 0x05; | |
| } | |
| gdc[VGA_GFX_COMPARE_MASK] = 0x0F; | |
| gdc[VGA_GFX_BIT_MASK] = 0xFF; | |
| for (i = 0x00; i < 0x10; i++) | |
| atc[i] = i; | |
| if (par->mode & MODE_TEXT) | |
| atc[VGA_ATC_MODE] = 0x04; | |
| else if (par->mode & MODE_8BPP) | |
| atc[VGA_ATC_MODE] = 0x41; | |
| else | |
| atc[VGA_ATC_MODE] = 0x81; | |
| atc[VGA_ATC_OVERSCAN] = 0x00; /* 0 for EGA, 0xFF for VGA */ | |
| atc[VGA_ATC_PLANE_ENABLE] = 0x0F; | |
| if (par->mode & MODE_8BPP) | |
| atc[VGA_ATC_PEL] = (info->var.xoffset & 3) << 1; | |
| else | |
| atc[VGA_ATC_PEL] = info->var.xoffset & 7; | |
| atc[VGA_ATC_COLOR_PAGE] = 0x00; | |
| if (par->mode & MODE_TEXT) { | |
| fh = 16; // FIXME !!! Fudge font height. | |
| par->crtc[VGA_CRTC_MAX_SCAN] = (par->crtc[VGA_CRTC_MAX_SCAN] | |
| & ~0x1F) | (fh - 1); | |
| } | |
| vga_io_w(VGA_MIS_W, vga_io_r(VGA_MIS_R) | 0x01); | |
| /* Enable graphics register modification */ | |
| if (!par->isVGA) { | |
| vga_io_w(EGA_GFX_E0, 0x00); | |
| vga_io_w(EGA_GFX_E1, 0x01); | |
| } | |
| /* update misc output register */ | |
| vga_io_w(VGA_MIS_W, par->misc); | |
| /* synchronous reset on */ | |
| vga_io_wseq(0x00, 0x01); | |
| if (par->isVGA) | |
| vga_io_w(VGA_PEL_MSK, par->pel_msk); | |
| /* write sequencer registers */ | |
| vga_io_wseq(VGA_SEQ_CLOCK_MODE, seq[VGA_SEQ_CLOCK_MODE] | 0x20); | |
| for (i = 2; i < VGA_SEQ_C; i++) { | |
| vga_io_wseq(i, seq[i]); | |
| } | |
| /* synchronous reset off */ | |
| vga_io_wseq(0x00, 0x03); | |
| /* deprotect CRT registers 0-7 */ | |
| vga_io_wcrt(VGA_CRTC_V_SYNC_END, par->crtc[VGA_CRTC_V_SYNC_END]); | |
| /* write CRT registers */ | |
| for (i = 0; i < VGA_CRTC_REGS; i++) { | |
| vga_io_wcrt(i, par->crtc[i]); | |
| } | |
| /* write graphics controller registers */ | |
| for (i = 0; i < VGA_GFX_C; i++) { | |
| vga_io_wgfx(i, gdc[i]); | |
| } | |
| /* write attribute controller registers */ | |
| for (i = 0; i < VGA_ATT_C; i++) { | |
| vga_io_r(VGA_IS1_RC); /* reset flip-flop */ | |
| vga_io_wattr(i, atc[i]); | |
| } | |
| /* Wait for screen to stabilize. */ | |
| mdelay(50); | |
| vga_io_wseq(VGA_SEQ_CLOCK_MODE, seq[VGA_SEQ_CLOCK_MODE]); | |
| vga_io_r(VGA_IS1_RC); | |
| vga_io_w(VGA_ATT_IW, 0x20); | |
| vga16fb_update_fix(info); | |
| return 0; | |
| } | |
| static void ega16_setpalette(int regno, unsigned red, unsigned green, unsigned blue) | |
| { | |
| static const unsigned char map[] = { 000, 001, 010, 011 }; | |
| int val; | |
| if (regno >= 16) | |
| return; | |
| val = map[red>>14] | ((map[green>>14]) << 1) | ((map[blue>>14]) << 2); | |
| vga_io_r(VGA_IS1_RC); /* ! 0x3BA */ | |
| vga_io_wattr(regno, val); | |
| vga_io_r(VGA_IS1_RC); /* some clones need it */ | |
| vga_io_w(VGA_ATT_IW, 0x20); /* unblank screen */ | |
| } | |
| static void vga16_setpalette(int regno, unsigned red, unsigned green, unsigned blue) | |
| { | |
| outb(regno, VGA_PEL_IW); | |
| outb(red >> 10, VGA_PEL_D); | |
| outb(green >> 10, VGA_PEL_D); | |
| outb(blue >> 10, VGA_PEL_D); | |
| } | |
| static int vga16fb_setcolreg(unsigned regno, unsigned red, unsigned green, | |
| unsigned blue, unsigned transp, | |
| struct fb_info *info) | |
| { | |
| struct vga16fb_par *par = info->par; | |
| int gray; | |
| /* | |
| * Set a single color register. The values supplied are | |
| * already rounded down to the hardware's capabilities | |
| * (according to the entries in the `var' structure). Return | |
| * != 0 for invalid regno. | |
| */ | |
| if (regno >= 256) | |
| return 1; | |
| gray = info->var.grayscale; | |
| if (gray) { | |
| /* gray = 0.30*R + 0.59*G + 0.11*B */ | |
| red = green = blue = (red * 77 + green * 151 + blue * 28) >> 8; | |
| } | |
| if (par->isVGA) | |
| vga16_setpalette(regno,red,green,blue); | |
| else | |
| ega16_setpalette(regno,red,green,blue); | |
| return 0; | |
| } | |
| static int vga16fb_pan_display(struct fb_var_screeninfo *var, | |
| struct fb_info *info) | |
| { | |
| vga16fb_pan_var(info, var); | |
| return 0; | |
| } | |
| /* The following VESA blanking code is taken from vgacon.c. The VGA | |
| blanking code was originally by Huang shi chao, and modified by | |
| Christoph Rimek (chrimek@toppoint.de) and todd j. derr | |
| (tjd@barefoot.org) for Linux. */ | |
| static void vga_vesa_blank(struct vga16fb_par *par, int mode) | |
| { | |
| unsigned char SeqCtrlIndex = vga_io_r(VGA_SEQ_I); | |
| unsigned char CrtCtrlIndex = vga_io_r(VGA_CRT_IC); | |
| /* save original values of VGA controller registers */ | |
| if(!par->vesa_blanked) { | |
| par->vga_state.CrtMiscIO = vga_io_r(VGA_MIS_R); | |
| //sti(); | |
| par->vga_state.HorizontalTotal = vga_io_rcrt(0x00); /* HorizontalTotal */ | |
| par->vga_state.HorizDisplayEnd = vga_io_rcrt(0x01); /* HorizDisplayEnd */ | |
| par->vga_state.StartHorizRetrace = vga_io_rcrt(0x04); /* StartHorizRetrace */ | |
| par->vga_state.EndHorizRetrace = vga_io_rcrt(0x05); /* EndHorizRetrace */ | |
| par->vga_state.Overflow = vga_io_rcrt(0x07); /* Overflow */ | |
| par->vga_state.StartVertRetrace = vga_io_rcrt(0x10); /* StartVertRetrace */ | |
| par->vga_state.EndVertRetrace = vga_io_rcrt(0x11); /* EndVertRetrace */ | |
| par->vga_state.ModeControl = vga_io_rcrt(0x17); /* ModeControl */ | |
| par->vga_state.ClockingMode = vga_io_rseq(0x01); /* ClockingMode */ | |
| } | |
| /* assure that video is enabled */ | |
| /* "0x20" is VIDEO_ENABLE_bit in register 01 of sequencer */ | |
| vga_io_wseq(0x01, par->vga_state.ClockingMode | 0x20); | |
| /* test for vertical retrace in process.... */ | |
| if ((par->vga_state.CrtMiscIO & 0x80) == 0x80) | |
| vga_io_w(VGA_MIS_W, par->vga_state.CrtMiscIO & 0xef); | |
| /* | |
| * Set <End of vertical retrace> to minimum (0) and | |
| * <Start of vertical Retrace> to maximum (incl. overflow) | |
| * Result: turn off vertical sync (VSync) pulse. | |
| */ | |
| if (mode & FB_BLANK_VSYNC_SUSPEND) { | |
| vga_io_wcrt(VGA_CRTC_V_SYNC_START, 0xff); | |
| vga_io_wcrt(VGA_CRTC_V_SYNC_END, 0x40); | |
| /* bits 9,10 of vert. retrace */ | |
| vga_io_wcrt(VGA_CRTC_OVERFLOW, par->vga_state.Overflow | 0x84); | |
| } | |
| if (mode & FB_BLANK_HSYNC_SUSPEND) { | |
| /* | |
| * Set <End of horizontal retrace> to minimum (0) and | |
| * <Start of horizontal Retrace> to maximum | |
| * Result: turn off horizontal sync (HSync) pulse. | |
| */ | |
| vga_io_wcrt(VGA_CRTC_H_SYNC_START, 0xff); | |
| vga_io_wcrt(VGA_CRTC_H_SYNC_END, 0x00); | |
| } | |
| /* restore both index registers */ | |
| outb_p(SeqCtrlIndex, VGA_SEQ_I); | |
| outb_p(CrtCtrlIndex, VGA_CRT_IC); | |
| } | |
| static void vga_vesa_unblank(struct vga16fb_par *par) | |
| { | |
| unsigned char SeqCtrlIndex = vga_io_r(VGA_SEQ_I); | |
| unsigned char CrtCtrlIndex = vga_io_r(VGA_CRT_IC); | |
| /* restore original values of VGA controller registers */ | |
| vga_io_w(VGA_MIS_W, par->vga_state.CrtMiscIO); | |
| /* HorizontalTotal */ | |
| vga_io_wcrt(0x00, par->vga_state.HorizontalTotal); | |
| /* HorizDisplayEnd */ | |
| vga_io_wcrt(0x01, par->vga_state.HorizDisplayEnd); | |
| /* StartHorizRetrace */ | |
| vga_io_wcrt(0x04, par->vga_state.StartHorizRetrace); | |
| /* EndHorizRetrace */ | |
| vga_io_wcrt(0x05, par->vga_state.EndHorizRetrace); | |
| /* Overflow */ | |
| vga_io_wcrt(0x07, par->vga_state.Overflow); | |
| /* StartVertRetrace */ | |
| vga_io_wcrt(0x10, par->vga_state.StartVertRetrace); | |
| /* EndVertRetrace */ | |
| vga_io_wcrt(0x11, par->vga_state.EndVertRetrace); | |
| /* ModeControl */ | |
| vga_io_wcrt(0x17, par->vga_state.ModeControl); | |
| /* ClockingMode */ | |
| vga_io_wseq(0x01, par->vga_state.ClockingMode); | |
| /* restore index/control registers */ | |
| vga_io_w(VGA_SEQ_I, SeqCtrlIndex); | |
| vga_io_w(VGA_CRT_IC, CrtCtrlIndex); | |
| } | |
| static void vga_pal_blank(void) | |
| { | |
| int i; | |
| for (i=0; i<16; i++) { | |
| outb_p(i, VGA_PEL_IW); | |
| outb_p(0, VGA_PEL_D); | |
| outb_p(0, VGA_PEL_D); | |
| outb_p(0, VGA_PEL_D); | |
| } | |
| } | |
| /* 0 unblank, 1 blank, 2 no vsync, 3 no hsync, 4 off */ | |
| static int vga16fb_blank(int blank, struct fb_info *info) | |
| { | |
| struct vga16fb_par *par = info->par; | |
| switch (blank) { | |
| case FB_BLANK_UNBLANK: /* Unblank */ | |
| if (par->vesa_blanked) { | |
| vga_vesa_unblank(par); | |
| par->vesa_blanked = 0; | |
| } | |
| if (par->palette_blanked) { | |
| par->palette_blanked = 0; | |
| } | |
| break; | |
| case FB_BLANK_NORMAL: /* blank */ | |
| vga_pal_blank(); | |
| par->palette_blanked = 1; | |
| break; | |
| default: /* VESA blanking */ | |
| vga_vesa_blank(par, blank); | |
| par->vesa_blanked = 1; | |
| break; | |
| } | |
| return 0; | |
| } | |
| static void vga_8planes_fillrect(struct fb_info *info, const struct fb_fillrect *rect) | |
| { | |
| u32 dx = rect->dx, width = rect->width; | |
| char oldindex = getindex(); | |
| char oldmode = setmode(0x40); | |
| char oldmask = selectmask(); | |
| int line_ofs, height; | |
| char oldop, oldsr; | |
| char __iomem *where; | |
| dx /= 4; | |
| where = info->screen_base + dx + rect->dy * info->fix.line_length; | |
| if (rect->rop == ROP_COPY) { | |
| oldop = setop(0); | |
| oldsr = setsr(0); | |
| width /= 4; | |
| line_ofs = info->fix.line_length - width; | |
| setmask(0xff); | |
| height = rect->height; | |
| while (height--) { | |
| int x; | |
| /* we can do memset... */ | |
| for (x = width; x > 0; --x) { | |
| writeb(rect->color, where); | |
| where++; | |
| } | |
| where += line_ofs; | |
| } | |
| } else { | |
| char oldcolor = setcolor(0xf); | |
| int y; | |
| oldop = setop(0x18); | |
| oldsr = setsr(0xf); | |
| setmask(0x0F); | |
| for (y = 0; y < rect->height; y++) { | |
| rmw(where); | |
| rmw(where+1); | |
| where += info->fix.line_length; | |
| } | |
| setcolor(oldcolor); | |
| } | |
| setmask(oldmask); | |
| setsr(oldsr); | |
| setop(oldop); | |
| setmode(oldmode); | |
| setindex(oldindex); | |
| } | |
| static void vga16fb_fillrect(struct fb_info *info, const struct fb_fillrect *rect) | |
| { | |
| int x, x2, y2, vxres, vyres, width, height, line_ofs; | |
| char __iomem *dst; | |
| vxres = info->var.xres_virtual; | |
| vyres = info->var.yres_virtual; | |
| if (!rect->width || !rect->height || rect->dx > vxres || rect->dy > vyres) | |
| return; | |
| /* We could use hardware clipping but on many cards you get around | |
| * hardware clipping by writing to framebuffer directly. */ | |
| x2 = rect->dx + rect->width; | |
| y2 = rect->dy + rect->height; | |
| x2 = x2 < vxres ? x2 : vxres; | |
| y2 = y2 < vyres ? y2 : vyres; | |
| width = x2 - rect->dx; | |
| switch (info->fix.type) { | |
| case FB_TYPE_VGA_PLANES: | |
| if (info->fix.type_aux == FB_AUX_VGA_PLANES_VGA4) { | |
| height = y2 - rect->dy; | |
| width = rect->width/8; | |
| line_ofs = info->fix.line_length - width; | |
| dst = info->screen_base + (rect->dx/8) + rect->dy * info->fix.line_length; | |
| switch (rect->rop) { | |
| case ROP_COPY: | |
| setmode(0); | |
| setop(0); | |
| setsr(0xf); | |
| setcolor(rect->color); | |
| selectmask(); | |
| setmask(0xff); | |
| while (height--) { | |
| for (x = 0; x < width; x++) { | |
| writeb(0, dst); | |
| dst++; | |
| } | |
| dst += line_ofs; | |
| } | |
| break; | |
| case ROP_XOR: | |
| setmode(0); | |
| setop(0x18); | |
| setsr(0xf); | |
| setcolor(0xf); | |
| selectmask(); | |
| setmask(0xff); | |
| while (height--) { | |
| for (x = 0; x < width; x++) { | |
| rmw(dst); | |
| dst++; | |
| } | |
| dst += line_ofs; | |
| } | |
| break; | |
| } | |
| } else | |
| vga_8planes_fillrect(info, rect); | |
| break; | |
| case FB_TYPE_PACKED_PIXELS: | |
| default: | |
| cfb_fillrect(info, rect); | |
| break; | |
| } | |
| } | |
| static void vga_8planes_copyarea(struct fb_info *info, const struct fb_copyarea *area) | |
| { | |
| char oldindex = getindex(); | |
| char oldmode = setmode(0x41); | |
| char oldop = setop(0); | |
| char oldsr = setsr(0xf); | |
| int height, line_ofs, x; | |
| u32 sx, dx, width; | |
| char __iomem *dest; | |
| char __iomem *src; | |
| height = area->height; | |
| sx = area->sx / 4; | |
| dx = area->dx / 4; | |
| width = area->width / 4; | |
| if (area->dy < area->sy || (area->dy == area->sy && dx < sx)) { | |
| line_ofs = info->fix.line_length - width; | |
| dest = info->screen_base + dx + area->dy * info->fix.line_length; | |
| src = info->screen_base + sx + area->sy * info->fix.line_length; | |
| while (height--) { | |
| for (x = 0; x < width; x++) { | |
| readb(src); | |
| writeb(0, dest); | |
| src++; | |
| dest++; | |
| } | |
| src += line_ofs; | |
| dest += line_ofs; | |
| } | |
| } else { | |
| line_ofs = info->fix.line_length - width; | |
| dest = info->screen_base + dx + width + | |
| (area->dy + height - 1) * info->fix.line_length; | |
| src = info->screen_base + sx + width + | |
| (area->sy + height - 1) * info->fix.line_length; | |
| while (height--) { | |
| for (x = 0; x < width; x++) { | |
| --src; | |
| --dest; | |
| readb(src); | |
| writeb(0, dest); | |
| } | |
| src -= line_ofs; | |
| dest -= line_ofs; | |
| } | |
| } | |
| setsr(oldsr); | |
| setop(oldop); | |
| setmode(oldmode); | |
| setindex(oldindex); | |
| } | |
| static void vga16fb_copyarea(struct fb_info *info, const struct fb_copyarea *area) | |
| { | |
| u32 dx = area->dx, dy = area->dy, sx = area->sx, sy = area->sy; | |
| int x, x2, y2, old_dx, old_dy, vxres, vyres; | |
| int height, width, line_ofs; | |
| char __iomem *dst = NULL; | |
| char __iomem *src = NULL; | |
| vxres = info->var.xres_virtual; | |
| vyres = info->var.yres_virtual; | |
| if (area->dx > vxres || area->sx > vxres || area->dy > vyres || | |
| area->sy > vyres) | |
| return; | |
| /* clip the destination */ | |
| old_dx = area->dx; | |
| old_dy = area->dy; | |
| /* | |
| * We could use hardware clipping but on many cards you get around | |
| * hardware clipping by writing to framebuffer directly. | |
| */ | |
| x2 = area->dx + area->width; | |
| y2 = area->dy + area->height; | |
| dx = area->dx > 0 ? area->dx : 0; | |
| dy = area->dy > 0 ? area->dy : 0; | |
| x2 = x2 < vxres ? x2 : vxres; | |
| y2 = y2 < vyres ? y2 : vyres; | |
| width = x2 - dx; | |
| height = y2 - dy; | |
| if (sx + dx < old_dx || sy + dy < old_dy) | |
| return; | |
| /* update sx1,sy1 */ | |
| sx += (dx - old_dx); | |
| sy += (dy - old_dy); | |
| /* the source must be completely inside the virtual screen */ | |
| if (sx + width > vxres || sy + height > vyres) | |
| return; | |
| switch (info->fix.type) { | |
| case FB_TYPE_VGA_PLANES: | |
| if (info->fix.type_aux == FB_AUX_VGA_PLANES_VGA4) { | |
| width = width/8; | |
| line_ofs = info->fix.line_length - width; | |
| setmode(1); | |
| setop(0); | |
| setsr(0xf); | |
| if (dy < sy || (dy == sy && dx < sx)) { | |
| dst = info->screen_base + (dx/8) + dy * info->fix.line_length; | |
| src = info->screen_base + (sx/8) + sy * info->fix.line_length; | |
| while (height--) { | |
| for (x = 0; x < width; x++) { | |
| readb(src); | |
| writeb(0, dst); | |
| dst++; | |
| src++; | |
| } | |
| src += line_ofs; | |
| dst += line_ofs; | |
| } | |
| } else { | |
| dst = info->screen_base + (dx/8) + width + | |
| (dy + height - 1) * info->fix.line_length; | |
| src = info->screen_base + (sx/8) + width + | |
| (sy + height - 1) * info->fix.line_length; | |
| while (height--) { | |
| for (x = 0; x < width; x++) { | |
| dst--; | |
| src--; | |
| readb(src); | |
| writeb(0, dst); | |
| } | |
| src -= line_ofs; | |
| dst -= line_ofs; | |
| } | |
| } | |
| } else | |
| vga_8planes_copyarea(info, area); | |
| break; | |
| case FB_TYPE_PACKED_PIXELS: | |
| default: | |
| cfb_copyarea(info, area); | |
| break; | |
| } | |
| } | |
| #define TRANS_MASK_LOW {0x0,0x8,0x4,0xC,0x2,0xA,0x6,0xE,0x1,0x9,0x5,0xD,0x3,0xB,0x7,0xF} | |
| #define TRANS_MASK_HIGH {0x000, 0x800, 0x400, 0xC00, 0x200, 0xA00, 0x600, 0xE00, \ | |
| 0x100, 0x900, 0x500, 0xD00, 0x300, 0xB00, 0x700, 0xF00} | |
| #if defined(__LITTLE_ENDIAN) | |
| static const u16 transl_l[] = TRANS_MASK_LOW; | |
| static const u16 transl_h[] = TRANS_MASK_HIGH; | |
| #elif defined(__BIG_ENDIAN) | |
| static const u16 transl_l[] = TRANS_MASK_HIGH; | |
| static const u16 transl_h[] = TRANS_MASK_LOW; | |
| #else | |
| #error "Only __BIG_ENDIAN and __LITTLE_ENDIAN are supported in vga-planes" | |
| #endif | |
| static void vga_8planes_imageblit(struct fb_info *info, const struct fb_image *image) | |
| { | |
| char oldindex = getindex(); | |
| char oldmode = setmode(0x40); | |
| char oldop = setop(0); | |
| char oldsr = setsr(0); | |
| char oldmask = selectmask(); | |
| const unsigned char *cdat = image->data; | |
| u32 dx = image->dx; | |
| char __iomem *where; | |
| int y; | |
| dx /= 4; | |
| where = info->screen_base + dx + image->dy * info->fix.line_length; | |
| setmask(0xff); | |
| writeb(image->bg_color, where); | |
| readb(where); | |
| selectmask(); | |
| setmask(image->fg_color ^ image->bg_color); | |
| setmode(0x42); | |
| setop(0x18); | |
| for (y = 0; y < image->height; y++, where += info->fix.line_length) | |
| writew(transl_h[cdat[y]&0xF] | transl_l[cdat[y] >> 4], where); | |
| setmask(oldmask); | |
| setsr(oldsr); | |
| setop(oldop); | |
| setmode(oldmode); | |
| setindex(oldindex); | |
| } | |
| static void vga_imageblit_expand(struct fb_info *info, const struct fb_image *image) | |
| { | |
| char __iomem *where = info->screen_base + (image->dx/8) + | |
| image->dy * info->fix.line_length; | |
| struct vga16fb_par *par = info->par; | |
| char *cdat = (char *) image->data; | |
| char __iomem *dst; | |
| int x, y; | |
| switch (info->fix.type) { | |
| case FB_TYPE_VGA_PLANES: | |
| if (info->fix.type_aux == FB_AUX_VGA_PLANES_VGA4) { | |
| if (par->isVGA) { | |
| setmode(2); | |
| setop(0); | |
| setsr(0xf); | |
| setcolor(image->fg_color); | |
| selectmask(); | |
| setmask(0xff); | |
| writeb(image->bg_color, where); | |
| rmb(); | |
| readb(where); /* fill latches */ | |
| setmode(3); | |
| wmb(); | |
| for (y = 0; y < image->height; y++) { | |
| dst = where; | |
| for (x = image->width/8; x--;) | |
| writeb(*cdat++, dst++); | |
| where += info->fix.line_length; | |
| } | |
| wmb(); | |
| } else { | |
| setmode(0); | |
| setop(0); | |
| setsr(0xf); | |
| setcolor(image->bg_color); | |
| selectmask(); | |
| setmask(0xff); | |
| for (y = 0; y < image->height; y++) { | |
| dst = where; | |
| for (x=image->width/8; x--;){ | |
| rmw(dst); | |
| setcolor(image->fg_color); | |
| selectmask(); | |
| if (*cdat) { | |
| setmask(*cdat++); | |
| rmw(dst++); | |
| } | |
| } | |
| where += info->fix.line_length; | |
| } | |
| } | |
| } else | |
| vga_8planes_imageblit(info, image); | |
| break; | |
| case FB_TYPE_PACKED_PIXELS: | |
| default: | |
| cfb_imageblit(info, image); | |
| break; | |
| } | |
| } | |
| static void vga_imageblit_color(struct fb_info *info, const struct fb_image *image) | |
| { | |
| /* | |
| * Draw logo | |
| */ | |
| struct vga16fb_par *par = info->par; | |
| char __iomem *where = | |
| info->screen_base + image->dy * info->fix.line_length + | |
| image->dx/8; | |
| const char *cdat = image->data; | |
| char __iomem *dst; | |
| int x, y; | |
| switch (info->fix.type) { | |
| case FB_TYPE_VGA_PLANES: | |
| if (info->fix.type_aux == FB_AUX_VGA_PLANES_VGA4 && | |
| par->isVGA) { | |
| setsr(0xf); | |
| setop(0); | |
| setmode(0); | |
| for (y = 0; y < image->height; y++) { | |
| for (x = 0; x < image->width; x++) { | |
| dst = where + x/8; | |
| setcolor(*cdat); | |
| selectmask(); | |
| setmask(1 << (7 - (x % 8))); | |
| fb_readb(dst); | |
| fb_writeb(0, dst); | |
| cdat++; | |
| } | |
| where += info->fix.line_length; | |
| } | |
| } | |
| break; | |
| case FB_TYPE_PACKED_PIXELS: | |
| cfb_imageblit(info, image); | |
| break; | |
| default: | |
| break; | |
| } | |
| } | |
| static void vga16fb_imageblit(struct fb_info *info, const struct fb_image *image) | |
| { | |
| if (image->depth == 1) | |
| vga_imageblit_expand(info, image); | |
| else | |
| vga_imageblit_color(info, image); | |
| } | |
| static void vga16fb_destroy(struct fb_info *info) | |
| { | |
| iounmap(info->screen_base); | |
| fb_dealloc_cmap(&info->cmap); | |
| /* XXX unshare VGA regions */ | |
| framebuffer_release(info); | |
| } | |
| static const struct fb_ops vga16fb_ops = { | |
| .owner = THIS_MODULE, | |
| .fb_open = vga16fb_open, | |
| .fb_release = vga16fb_release, | |
| .fb_destroy = vga16fb_destroy, | |
| .fb_check_var = vga16fb_check_var, | |
| .fb_set_par = vga16fb_set_par, | |
| .fb_setcolreg = vga16fb_setcolreg, | |
| .fb_pan_display = vga16fb_pan_display, | |
| .fb_blank = vga16fb_blank, | |
| .fb_fillrect = vga16fb_fillrect, | |
| .fb_copyarea = vga16fb_copyarea, | |
| .fb_imageblit = vga16fb_imageblit, | |
| }; | |
| #ifndef MODULE | |
| static int __init vga16fb_setup(char *options) | |
| { | |
| char *this_opt; | |
| if (!options || !*options) | |
| return 0; | |
| while ((this_opt = strsep(&options, ",")) != NULL) { | |
| if (!*this_opt) continue; | |
| } | |
| return 0; | |
| } | |
| #endif | |
| static int vga16fb_probe(struct platform_device *dev) | |
| { | |
| struct fb_info *info; | |
| struct vga16fb_par *par; | |
| int i; | |
| int ret = 0; | |
| printk(KERN_DEBUG "vga16fb: initializing\n"); | |
| info = framebuffer_alloc(sizeof(struct vga16fb_par), &dev->dev); | |
| if (!info) { | |
| ret = -ENOMEM; | |
| goto err_fb_alloc; | |
| } | |
| info->apertures = alloc_apertures(1); | |
| if (!info->apertures) { | |
| ret = -ENOMEM; | |
| goto err_ioremap; | |
| } | |
| /* XXX share VGA_FB_PHYS and I/O region with vgacon and others */ | |
| info->screen_base = (void __iomem *)VGA_MAP_MEM(VGA_FB_PHYS, 0); | |
| if (!info->screen_base) { | |
| printk(KERN_ERR "vga16fb: unable to map device\n"); | |
| ret = -ENOMEM; | |
| goto err_ioremap; | |
| } | |
| printk(KERN_INFO "vga16fb: mapped to 0x%p\n", info->screen_base); | |
| par = info->par; | |
| par->isVGA = screen_info.orig_video_isVGA; | |
| par->palette_blanked = 0; | |
| par->vesa_blanked = 0; | |
| i = par->isVGA? 6 : 2; | |
| vga16fb_defined.red.length = i; | |
| vga16fb_defined.green.length = i; | |
| vga16fb_defined.blue.length = i; | |
| /* name should not depend on EGA/VGA */ | |
| info->fbops = &vga16fb_ops; | |
| info->var = vga16fb_defined; | |
| info->fix = vga16fb_fix; | |
| /* supports rectangles with widths of multiples of 8 */ | |
| info->pixmap.blit_x = 1 << 7 | 1 << 15 | 1 << 23 | 1 << 31; | |
| info->flags = FBINFO_FLAG_DEFAULT | FBINFO_MISC_FIRMWARE | | |
| FBINFO_HWACCEL_YPAN; | |
| i = (info->var.bits_per_pixel == 8) ? 256 : 16; | |
| ret = fb_alloc_cmap(&info->cmap, i, 0); | |
| if (ret) { | |
| printk(KERN_ERR "vga16fb: unable to allocate colormap\n"); | |
| ret = -ENOMEM; | |
| goto err_alloc_cmap; | |
| } | |
| if (vga16fb_check_var(&info->var, info)) { | |
| printk(KERN_ERR "vga16fb: unable to validate variable\n"); | |
| ret = -EINVAL; | |
| goto err_check_var; | |
| } | |
| vga16fb_update_fix(info); | |
| info->apertures->ranges[0].base = VGA_FB_PHYS; | |
| info->apertures->ranges[0].size = VGA_FB_PHYS_LEN; | |
| if (register_framebuffer(info) < 0) { | |
| printk(KERN_ERR "vga16fb: unable to register framebuffer\n"); | |
| ret = -EINVAL; | |
| goto err_check_var; | |
| } | |
| fb_info(info, "%s frame buffer device\n", info->fix.id); | |
| platform_set_drvdata(dev, info); | |
| return 0; | |
| err_check_var: | |
| fb_dealloc_cmap(&info->cmap); | |
| err_alloc_cmap: | |
| iounmap(info->screen_base); | |
| err_ioremap: | |
| framebuffer_release(info); | |
| err_fb_alloc: | |
| return ret; | |
| } | |
| static int vga16fb_remove(struct platform_device *dev) | |
| { | |
| struct fb_info *info = platform_get_drvdata(dev); | |
| if (info) | |
| unregister_framebuffer(info); | |
| return 0; | |
| } | |
| static struct platform_driver vga16fb_driver = { | |
| .probe = vga16fb_probe, | |
| .remove = vga16fb_remove, | |
| .driver = { | |
| .name = "vga16fb", | |
| }, | |
| }; | |
| static struct platform_device *vga16fb_device; | |
| static int __init vga16fb_init(void) | |
| { | |
| int ret; | |
| #ifndef MODULE | |
| char *option = NULL; | |
| if (fb_get_options("vga16fb", &option)) | |
| return -ENODEV; | |
| vga16fb_setup(option); | |
| #endif | |
| ret = platform_driver_register(&vga16fb_driver); | |
| if (!ret) { | |
| vga16fb_device = platform_device_alloc("vga16fb", 0); | |
| if (vga16fb_device) | |
| ret = platform_device_add(vga16fb_device); | |
| else | |
| ret = -ENOMEM; | |
| if (ret) { | |
| platform_device_put(vga16fb_device); | |
| platform_driver_unregister(&vga16fb_driver); | |
| } | |
| } | |
| return ret; | |
| } | |
| static void __exit vga16fb_exit(void) | |
| { | |
| platform_device_unregister(vga16fb_device); | |
| platform_driver_unregister(&vga16fb_driver); | |
| } | |
| MODULE_DESCRIPTION("Legacy VGA framebuffer device driver"); | |
| MODULE_LICENSE("GPL"); | |
| module_init(vga16fb_init); | |
| module_exit(vga16fb_exit); | |
| /* | |
| * Overrides for Emacs so that we follow Linus's tabbing style. | |
| * --------------------------------------------------------------------------- | |
| * Local variables: | |
| * c-basic-offset: 8 | |
| * End: | |
| */ | |