| // SPDX-License-Identifier: LGPL-2.1 | |
| /* | |
| * Copyright (c) 2012 Taobao. | |
| * Written by Tao Ma <boyu.mt@taobao.com> | |
| */ | |
| #include <linux/iomap.h> | |
| #include <linux/fiemap.h> | |
| #include <linux/iversion.h> | |
| #include "ext4_jbd2.h" | |
| #include "ext4.h" | |
| #include "xattr.h" | |
| #include "truncate.h" | |
| #define EXT4_XATTR_SYSTEM_DATA "data" | |
| #define EXT4_MIN_INLINE_DATA_SIZE ((sizeof(__le32) * EXT4_N_BLOCKS)) | |
| #define EXT4_INLINE_DOTDOT_OFFSET 2 | |
| #define EXT4_INLINE_DOTDOT_SIZE 4 | |
| static int ext4_get_inline_size(struct inode *inode) | |
| { | |
| if (EXT4_I(inode)->i_inline_off) | |
| return EXT4_I(inode)->i_inline_size; | |
| return 0; | |
| } | |
| static int get_max_inline_xattr_value_size(struct inode *inode, | |
| struct ext4_iloc *iloc) | |
| { | |
| struct ext4_xattr_ibody_header *header; | |
| struct ext4_xattr_entry *entry; | |
| struct ext4_inode *raw_inode; | |
| int free, min_offs; | |
| min_offs = EXT4_SB(inode->i_sb)->s_inode_size - | |
| EXT4_GOOD_OLD_INODE_SIZE - | |
| EXT4_I(inode)->i_extra_isize - | |
| sizeof(struct ext4_xattr_ibody_header); | |
| /* | |
| * We need to subtract another sizeof(__u32) since an in-inode xattr | |
| * needs an empty 4 bytes to indicate the gap between the xattr entry | |
| * and the name/value pair. | |
| */ | |
| if (!ext4_test_inode_state(inode, EXT4_STATE_XATTR)) | |
| return EXT4_XATTR_SIZE(min_offs - | |
| EXT4_XATTR_LEN(strlen(EXT4_XATTR_SYSTEM_DATA)) - | |
| EXT4_XATTR_ROUND - sizeof(__u32)); | |
| raw_inode = ext4_raw_inode(iloc); | |
| header = IHDR(inode, raw_inode); | |
| entry = IFIRST(header); | |
| /* Compute min_offs. */ | |
| for (; !IS_LAST_ENTRY(entry); entry = EXT4_XATTR_NEXT(entry)) { | |
| if (!entry->e_value_inum && entry->e_value_size) { | |
| size_t offs = le16_to_cpu(entry->e_value_offs); | |
| if (offs < min_offs) | |
| min_offs = offs; | |
| } | |
| } | |
| free = min_offs - | |
| ((void *)entry - (void *)IFIRST(header)) - sizeof(__u32); | |
| if (EXT4_I(inode)->i_inline_off) { | |
| entry = (struct ext4_xattr_entry *) | |
| ((void *)raw_inode + EXT4_I(inode)->i_inline_off); | |
| free += EXT4_XATTR_SIZE(le32_to_cpu(entry->e_value_size)); | |
| goto out; | |
| } | |
| free -= EXT4_XATTR_LEN(strlen(EXT4_XATTR_SYSTEM_DATA)); | |
| if (free > EXT4_XATTR_ROUND) | |
| free = EXT4_XATTR_SIZE(free - EXT4_XATTR_ROUND); | |
| else | |
| free = 0; | |
| out: | |
| return free; | |
| } | |
| /* | |
| * Get the maximum size we now can store in an inode. | |
| * If we can't find the space for a xattr entry, don't use the space | |
| * of the extents since we have no space to indicate the inline data. | |
| */ | |
| int ext4_get_max_inline_size(struct inode *inode) | |
| { | |
| int error, max_inline_size; | |
| struct ext4_iloc iloc; | |
| if (EXT4_I(inode)->i_extra_isize == 0) | |
| return 0; | |
| error = ext4_get_inode_loc(inode, &iloc); | |
| if (error) { | |
| ext4_error_inode_err(inode, __func__, __LINE__, 0, -error, | |
| "can't get inode location %lu", | |
| inode->i_ino); | |
| return 0; | |
| } | |
| down_read(&EXT4_I(inode)->xattr_sem); | |
| max_inline_size = get_max_inline_xattr_value_size(inode, &iloc); | |
| up_read(&EXT4_I(inode)->xattr_sem); | |
| brelse(iloc.bh); | |
| if (!max_inline_size) | |
| return 0; | |
| return max_inline_size + EXT4_MIN_INLINE_DATA_SIZE; | |
| } | |
| /* | |
| * this function does not take xattr_sem, which is OK because it is | |
| * currently only used in a code path coming form ext4_iget, before | |
| * the new inode has been unlocked | |
| */ | |
| int ext4_find_inline_data_nolock(struct inode *inode) | |
| { | |
| struct ext4_xattr_ibody_find is = { | |
| .s = { .not_found = -ENODATA, }, | |
| }; | |
| struct ext4_xattr_info i = { | |
| .name_index = EXT4_XATTR_INDEX_SYSTEM, | |
| .name = EXT4_XATTR_SYSTEM_DATA, | |
| }; | |
| int error; | |
| if (EXT4_I(inode)->i_extra_isize == 0) | |
| return 0; | |
| error = ext4_get_inode_loc(inode, &is.iloc); | |
| if (error) | |
| return error; | |
| error = ext4_xattr_ibody_find(inode, &i, &is); | |
| if (error) | |
| goto out; | |
| if (!is.s.not_found) { | |
| if (is.s.here->e_value_inum) { | |
| EXT4_ERROR_INODE(inode, "inline data xattr refers " | |
| "to an external xattr inode"); | |
| error = -EFSCORRUPTED; | |
| goto out; | |
| } | |
| EXT4_I(inode)->i_inline_off = (u16)((void *)is.s.here - | |
| (void *)ext4_raw_inode(&is.iloc)); | |
| EXT4_I(inode)->i_inline_size = EXT4_MIN_INLINE_DATA_SIZE + | |
| le32_to_cpu(is.s.here->e_value_size); | |
| ext4_set_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA); | |
| } | |
| out: | |
| brelse(is.iloc.bh); | |
| return error; | |
| } | |
| static int ext4_read_inline_data(struct inode *inode, void *buffer, | |
| unsigned int len, | |
| struct ext4_iloc *iloc) | |
| { | |
| struct ext4_xattr_entry *entry; | |
| struct ext4_xattr_ibody_header *header; | |
| int cp_len = 0; | |
| struct ext4_inode *raw_inode; | |
| if (!len) | |
| return 0; | |
| BUG_ON(len > EXT4_I(inode)->i_inline_size); | |
| cp_len = len < EXT4_MIN_INLINE_DATA_SIZE ? | |
| len : EXT4_MIN_INLINE_DATA_SIZE; | |
| raw_inode = ext4_raw_inode(iloc); | |
| memcpy(buffer, (void *)(raw_inode->i_block), cp_len); | |
| len -= cp_len; | |
| buffer += cp_len; | |
| if (!len) | |
| goto out; | |
| header = IHDR(inode, raw_inode); | |
| entry = (struct ext4_xattr_entry *)((void *)raw_inode + | |
| EXT4_I(inode)->i_inline_off); | |
| len = min_t(unsigned int, len, | |
| (unsigned int)le32_to_cpu(entry->e_value_size)); | |
| memcpy(buffer, | |
| (void *)IFIRST(header) + le16_to_cpu(entry->e_value_offs), len); | |
| cp_len += len; | |
| out: | |
| return cp_len; | |
| } | |
| /* | |
| * write the buffer to the inline inode. | |
| * If 'create' is set, we don't need to do the extra copy in the xattr | |
| * value since it is already handled by ext4_xattr_ibody_inline_set. | |
| * That saves us one memcpy. | |
| */ | |
| static void ext4_write_inline_data(struct inode *inode, struct ext4_iloc *iloc, | |
| void *buffer, loff_t pos, unsigned int len) | |
| { | |
| struct ext4_xattr_entry *entry; | |
| struct ext4_xattr_ibody_header *header; | |
| struct ext4_inode *raw_inode; | |
| int cp_len = 0; | |
| if (unlikely(ext4_forced_shutdown(EXT4_SB(inode->i_sb)))) | |
| return; | |
| BUG_ON(!EXT4_I(inode)->i_inline_off); | |
| BUG_ON(pos + len > EXT4_I(inode)->i_inline_size); | |
| raw_inode = ext4_raw_inode(iloc); | |
| buffer += pos; | |
| if (pos < EXT4_MIN_INLINE_DATA_SIZE) { | |
| cp_len = pos + len > EXT4_MIN_INLINE_DATA_SIZE ? | |
| EXT4_MIN_INLINE_DATA_SIZE - pos : len; | |
| memcpy((void *)raw_inode->i_block + pos, buffer, cp_len); | |
| len -= cp_len; | |
| buffer += cp_len; | |
| pos += cp_len; | |
| } | |
| if (!len) | |
| return; | |
| pos -= EXT4_MIN_INLINE_DATA_SIZE; | |
| header = IHDR(inode, raw_inode); | |
| entry = (struct ext4_xattr_entry *)((void *)raw_inode + | |
| EXT4_I(inode)->i_inline_off); | |
| memcpy((void *)IFIRST(header) + le16_to_cpu(entry->e_value_offs) + pos, | |
| buffer, len); | |
| } | |
| static int ext4_create_inline_data(handle_t *handle, | |
| struct inode *inode, unsigned len) | |
| { | |
| int error; | |
| void *value = NULL; | |
| struct ext4_xattr_ibody_find is = { | |
| .s = { .not_found = -ENODATA, }, | |
| }; | |
| struct ext4_xattr_info i = { | |
| .name_index = EXT4_XATTR_INDEX_SYSTEM, | |
| .name = EXT4_XATTR_SYSTEM_DATA, | |
| }; | |
| error = ext4_get_inode_loc(inode, &is.iloc); | |
| if (error) | |
| return error; | |
| BUFFER_TRACE(is.iloc.bh, "get_write_access"); | |
| error = ext4_journal_get_write_access(handle, is.iloc.bh); | |
| if (error) | |
| goto out; | |
| if (len > EXT4_MIN_INLINE_DATA_SIZE) { | |
| value = EXT4_ZERO_XATTR_VALUE; | |
| len -= EXT4_MIN_INLINE_DATA_SIZE; | |
| } else { | |
| value = ""; | |
| len = 0; | |
| } | |
| /* Insert the xttr entry. */ | |
| i.value = value; | |
| i.value_len = len; | |
| error = ext4_xattr_ibody_find(inode, &i, &is); | |
| if (error) | |
| goto out; | |
| BUG_ON(!is.s.not_found); | |
| error = ext4_xattr_ibody_inline_set(handle, inode, &i, &is); | |
| if (error) { | |
| if (error == -ENOSPC) | |
| ext4_clear_inode_state(inode, | |
| EXT4_STATE_MAY_INLINE_DATA); | |
| goto out; | |
| } | |
| memset((void *)ext4_raw_inode(&is.iloc)->i_block, | |
| 0, EXT4_MIN_INLINE_DATA_SIZE); | |
| EXT4_I(inode)->i_inline_off = (u16)((void *)is.s.here - | |
| (void *)ext4_raw_inode(&is.iloc)); | |
| EXT4_I(inode)->i_inline_size = len + EXT4_MIN_INLINE_DATA_SIZE; | |
| ext4_clear_inode_flag(inode, EXT4_INODE_EXTENTS); | |
| ext4_set_inode_flag(inode, EXT4_INODE_INLINE_DATA); | |
| get_bh(is.iloc.bh); | |
| error = ext4_mark_iloc_dirty(handle, inode, &is.iloc); | |
| out: | |
| brelse(is.iloc.bh); | |
| return error; | |
| } | |
| static int ext4_update_inline_data(handle_t *handle, struct inode *inode, | |
| unsigned int len) | |
| { | |
| int error; | |
| void *value = NULL; | |
| struct ext4_xattr_ibody_find is = { | |
| .s = { .not_found = -ENODATA, }, | |
| }; | |
| struct ext4_xattr_info i = { | |
| .name_index = EXT4_XATTR_INDEX_SYSTEM, | |
| .name = EXT4_XATTR_SYSTEM_DATA, | |
| }; | |
| /* If the old space is ok, write the data directly. */ | |
| if (len <= EXT4_I(inode)->i_inline_size) | |
| return 0; | |
| error = ext4_get_inode_loc(inode, &is.iloc); | |
| if (error) | |
| return error; | |
| error = ext4_xattr_ibody_find(inode, &i, &is); | |
| if (error) | |
| goto out; | |
| BUG_ON(is.s.not_found); | |
| len -= EXT4_MIN_INLINE_DATA_SIZE; | |
| value = kzalloc(len, GFP_NOFS); | |
| if (!value) { | |
| error = -ENOMEM; | |
| goto out; | |
| } | |
| error = ext4_xattr_ibody_get(inode, i.name_index, i.name, | |
| value, len); | |
| if (error == -ENODATA) | |
| goto out; | |
| BUFFER_TRACE(is.iloc.bh, "get_write_access"); | |
| error = ext4_journal_get_write_access(handle, is.iloc.bh); | |
| if (error) | |
| goto out; | |
| /* Update the xattr entry. */ | |
| i.value = value; | |
| i.value_len = len; | |
| error = ext4_xattr_ibody_inline_set(handle, inode, &i, &is); | |
| if (error) | |
| goto out; | |
| EXT4_I(inode)->i_inline_off = (u16)((void *)is.s.here - | |
| (void *)ext4_raw_inode(&is.iloc)); | |
| EXT4_I(inode)->i_inline_size = EXT4_MIN_INLINE_DATA_SIZE + | |
| le32_to_cpu(is.s.here->e_value_size); | |
| ext4_set_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA); | |
| get_bh(is.iloc.bh); | |
| error = ext4_mark_iloc_dirty(handle, inode, &is.iloc); | |
| out: | |
| kfree(value); | |
| brelse(is.iloc.bh); | |
| return error; | |
| } | |
| static int ext4_prepare_inline_data(handle_t *handle, struct inode *inode, | |
| unsigned int len) | |
| { | |
| int ret, size, no_expand; | |
| struct ext4_inode_info *ei = EXT4_I(inode); | |
| if (!ext4_test_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA)) | |
| return -ENOSPC; | |
| size = ext4_get_max_inline_size(inode); | |
| if (size < len) | |
| return -ENOSPC; | |
| ext4_write_lock_xattr(inode, &no_expand); | |
| if (ei->i_inline_off) | |
| ret = ext4_update_inline_data(handle, inode, len); | |
| else | |
| ret = ext4_create_inline_data(handle, inode, len); | |
| ext4_write_unlock_xattr(inode, &no_expand); | |
| return ret; | |
| } | |
| static int ext4_destroy_inline_data_nolock(handle_t *handle, | |
| struct inode *inode) | |
| { | |
| struct ext4_inode_info *ei = EXT4_I(inode); | |
| struct ext4_xattr_ibody_find is = { | |
| .s = { .not_found = 0, }, | |
| }; | |
| struct ext4_xattr_info i = { | |
| .name_index = EXT4_XATTR_INDEX_SYSTEM, | |
| .name = EXT4_XATTR_SYSTEM_DATA, | |
| .value = NULL, | |
| .value_len = 0, | |
| }; | |
| int error; | |
| if (!ei->i_inline_off) | |
| return 0; | |
| error = ext4_get_inode_loc(inode, &is.iloc); | |
| if (error) | |
| return error; | |
| error = ext4_xattr_ibody_find(inode, &i, &is); | |
| if (error) | |
| goto out; | |
| BUFFER_TRACE(is.iloc.bh, "get_write_access"); | |
| error = ext4_journal_get_write_access(handle, is.iloc.bh); | |
| if (error) | |
| goto out; | |
| error = ext4_xattr_ibody_inline_set(handle, inode, &i, &is); | |
| if (error) | |
| goto out; | |
| memset((void *)ext4_raw_inode(&is.iloc)->i_block, | |
| 0, EXT4_MIN_INLINE_DATA_SIZE); | |
| memset(ei->i_data, 0, EXT4_MIN_INLINE_DATA_SIZE); | |
| if (ext4_has_feature_extents(inode->i_sb)) { | |
| if (S_ISDIR(inode->i_mode) || | |
| S_ISREG(inode->i_mode) || S_ISLNK(inode->i_mode)) { | |
| ext4_set_inode_flag(inode, EXT4_INODE_EXTENTS); | |
| ext4_ext_tree_init(handle, inode); | |
| } | |
| } | |
| ext4_clear_inode_flag(inode, EXT4_INODE_INLINE_DATA); | |
| get_bh(is.iloc.bh); | |
| error = ext4_mark_iloc_dirty(handle, inode, &is.iloc); | |
| EXT4_I(inode)->i_inline_off = 0; | |
| EXT4_I(inode)->i_inline_size = 0; | |
| ext4_clear_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA); | |
| out: | |
| brelse(is.iloc.bh); | |
| if (error == -ENODATA) | |
| error = 0; | |
| return error; | |
| } | |
| static int ext4_read_inline_page(struct inode *inode, struct page *page) | |
| { | |
| void *kaddr; | |
| int ret = 0; | |
| size_t len; | |
| struct ext4_iloc iloc; | |
| BUG_ON(!PageLocked(page)); | |
| BUG_ON(!ext4_has_inline_data(inode)); | |
| BUG_ON(page->index); | |
| if (!EXT4_I(inode)->i_inline_off) { | |
| ext4_warning(inode->i_sb, "inode %lu doesn't have inline data.", | |
| inode->i_ino); | |
| goto out; | |
| } | |
| ret = ext4_get_inode_loc(inode, &iloc); | |
| if (ret) | |
| goto out; | |
| len = min_t(size_t, ext4_get_inline_size(inode), i_size_read(inode)); | |
| kaddr = kmap_atomic(page); | |
| ret = ext4_read_inline_data(inode, kaddr, len, &iloc); | |
| flush_dcache_page(page); | |
| kunmap_atomic(kaddr); | |
| zero_user_segment(page, len, PAGE_SIZE); | |
| SetPageUptodate(page); | |
| brelse(iloc.bh); | |
| out: | |
| return ret; | |
| } | |
| int ext4_readpage_inline(struct inode *inode, struct page *page) | |
| { | |
| int ret = 0; | |
| down_read(&EXT4_I(inode)->xattr_sem); | |
| if (!ext4_has_inline_data(inode)) { | |
| up_read(&EXT4_I(inode)->xattr_sem); | |
| return -EAGAIN; | |
| } | |
| /* | |
| * Current inline data can only exist in the 1st page, | |
| * So for all the other pages, just set them uptodate. | |
| */ | |
| if (!page->index) | |
| ret = ext4_read_inline_page(inode, page); | |
| else if (!PageUptodate(page)) { | |
| zero_user_segment(page, 0, PAGE_SIZE); | |
| SetPageUptodate(page); | |
| } | |
| up_read(&EXT4_I(inode)->xattr_sem); | |
| unlock_page(page); | |
| return ret >= 0 ? 0 : ret; | |
| } | |
| static int ext4_convert_inline_data_to_extent(struct address_space *mapping, | |
| struct inode *inode, | |
| unsigned flags) | |
| { | |
| int ret, needed_blocks, no_expand; | |
| handle_t *handle = NULL; | |
| int retries = 0, sem_held = 0; | |
| struct page *page = NULL; | |
| unsigned from, to; | |
| struct ext4_iloc iloc; | |
| if (!ext4_has_inline_data(inode)) { | |
| /* | |
| * clear the flag so that no new write | |
| * will trap here again. | |
| */ | |
| ext4_clear_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA); | |
| return 0; | |
| } | |
| needed_blocks = ext4_writepage_trans_blocks(inode); | |
| ret = ext4_get_inode_loc(inode, &iloc); | |
| if (ret) | |
| return ret; | |
| retry: | |
| handle = ext4_journal_start(inode, EXT4_HT_WRITE_PAGE, needed_blocks); | |
| if (IS_ERR(handle)) { | |
| ret = PTR_ERR(handle); | |
| handle = NULL; | |
| goto out; | |
| } | |
| /* We cannot recurse into the filesystem as the transaction is already | |
| * started */ | |
| flags |= AOP_FLAG_NOFS; | |
| page = grab_cache_page_write_begin(mapping, 0, flags); | |
| if (!page) { | |
| ret = -ENOMEM; | |
| goto out; | |
| } | |
| ext4_write_lock_xattr(inode, &no_expand); | |
| sem_held = 1; | |
| /* If some one has already done this for us, just exit. */ | |
| if (!ext4_has_inline_data(inode)) { | |
| ret = 0; | |
| goto out; | |
| } | |
| from = 0; | |
| to = ext4_get_inline_size(inode); | |
| if (!PageUptodate(page)) { | |
| ret = ext4_read_inline_page(inode, page); | |
| if (ret < 0) | |
| goto out; | |
| } | |
| ret = ext4_destroy_inline_data_nolock(handle, inode); | |
| if (ret) | |
| goto out; | |
| if (ext4_should_dioread_nolock(inode)) { | |
| ret = __block_write_begin(page, from, to, | |
| ext4_get_block_unwritten); | |
| } else | |
| ret = __block_write_begin(page, from, to, ext4_get_block); | |
| if (!ret && ext4_should_journal_data(inode)) { | |
| ret = ext4_walk_page_buffers(handle, page_buffers(page), | |
| from, to, NULL, | |
| do_journal_get_write_access); | |
| } | |
| if (ret) { | |
| unlock_page(page); | |
| put_page(page); | |
| page = NULL; | |
| ext4_orphan_add(handle, inode); | |
| ext4_write_unlock_xattr(inode, &no_expand); | |
| sem_held = 0; | |
| ext4_journal_stop(handle); | |
| handle = NULL; | |
| ext4_truncate_failed_write(inode); | |
| /* | |
| * If truncate failed early the inode might | |
| * still be on the orphan list; we need to | |
| * make sure the inode is removed from the | |
| * orphan list in that case. | |
| */ | |
| if (inode->i_nlink) | |
| ext4_orphan_del(NULL, inode); | |
| } | |
| if (ret == -ENOSPC && ext4_should_retry_alloc(inode->i_sb, &retries)) | |
| goto retry; | |
| if (page) | |
| block_commit_write(page, from, to); | |
| out: | |
| if (page) { | |
| unlock_page(page); | |
| put_page(page); | |
| } | |
| if (sem_held) | |
| ext4_write_unlock_xattr(inode, &no_expand); | |
| if (handle) | |
| ext4_journal_stop(handle); | |
| brelse(iloc.bh); | |
| return ret; | |
| } | |
| /* | |
| * Try to write data in the inode. | |
| * If the inode has inline data, check whether the new write can be | |
| * in the inode also. If not, create the page the handle, move the data | |
| * to the page make it update and let the later codes create extent for it. | |
| */ | |
| int ext4_try_to_write_inline_data(struct address_space *mapping, | |
| struct inode *inode, | |
| loff_t pos, unsigned len, | |
| unsigned flags, | |
| struct page **pagep) | |
| { | |
| int ret; | |
| handle_t *handle; | |
| struct page *page; | |
| struct ext4_iloc iloc; | |
| if (pos + len > ext4_get_max_inline_size(inode)) | |
| goto convert; | |
| ret = ext4_get_inode_loc(inode, &iloc); | |
| if (ret) | |
| return ret; | |
| /* | |
| * The possible write could happen in the inode, | |
| * so try to reserve the space in inode first. | |
| */ | |
| handle = ext4_journal_start(inode, EXT4_HT_INODE, 1); | |
| if (IS_ERR(handle)) { | |
| ret = PTR_ERR(handle); | |
| handle = NULL; | |
| goto out; | |
| } | |
| ret = ext4_prepare_inline_data(handle, inode, pos + len); | |
| if (ret && ret != -ENOSPC) | |
| goto out; | |
| /* We don't have space in inline inode, so convert it to extent. */ | |
| if (ret == -ENOSPC) { | |
| ext4_journal_stop(handle); | |
| brelse(iloc.bh); | |
| goto convert; | |
| } | |
| ret = ext4_journal_get_write_access(handle, iloc.bh); | |
| if (ret) | |
| goto out; | |
| flags |= AOP_FLAG_NOFS; | |
| page = grab_cache_page_write_begin(mapping, 0, flags); | |
| if (!page) { | |
| ret = -ENOMEM; | |
| goto out; | |
| } | |
| *pagep = page; | |
| down_read(&EXT4_I(inode)->xattr_sem); | |
| if (!ext4_has_inline_data(inode)) { | |
| ret = 0; | |
| unlock_page(page); | |
| put_page(page); | |
| goto out_up_read; | |
| } | |
| if (!PageUptodate(page)) { | |
| ret = ext4_read_inline_page(inode, page); | |
| if (ret < 0) { | |
| unlock_page(page); | |
| put_page(page); | |
| goto out_up_read; | |
| } | |
| } | |
| ret = 1; | |
| handle = NULL; | |
| out_up_read: | |
| up_read(&EXT4_I(inode)->xattr_sem); | |
| out: | |
| if (handle && (ret != 1)) | |
| ext4_journal_stop(handle); | |
| brelse(iloc.bh); | |
| return ret; | |
| convert: | |
| return ext4_convert_inline_data_to_extent(mapping, | |
| inode, flags); | |
| } | |
| int ext4_write_inline_data_end(struct inode *inode, loff_t pos, unsigned len, | |
| unsigned copied, struct page *page) | |
| { | |
| int ret, no_expand; | |
| void *kaddr; | |
| struct ext4_iloc iloc; | |
| if (unlikely(copied < len)) { | |
| if (!PageUptodate(page)) { | |
| copied = 0; | |
| goto out; | |
| } | |
| } | |
| ret = ext4_get_inode_loc(inode, &iloc); | |
| if (ret) { | |
| ext4_std_error(inode->i_sb, ret); | |
| copied = 0; | |
| goto out; | |
| } | |
| ext4_write_lock_xattr(inode, &no_expand); | |
| BUG_ON(!ext4_has_inline_data(inode)); | |
| kaddr = kmap_atomic(page); | |
| ext4_write_inline_data(inode, &iloc, kaddr, pos, len); | |
| kunmap_atomic(kaddr); | |
| SetPageUptodate(page); | |
| /* clear page dirty so that writepages wouldn't work for us. */ | |
| ClearPageDirty(page); | |
| ext4_write_unlock_xattr(inode, &no_expand); | |
| brelse(iloc.bh); | |
| mark_inode_dirty(inode); | |
| out: | |
| return copied; | |
| } | |
| struct buffer_head * | |
| ext4_journalled_write_inline_data(struct inode *inode, | |
| unsigned len, | |
| struct page *page) | |
| { | |
| int ret, no_expand; | |
| void *kaddr; | |
| struct ext4_iloc iloc; | |
| ret = ext4_get_inode_loc(inode, &iloc); | |
| if (ret) { | |
| ext4_std_error(inode->i_sb, ret); | |
| return NULL; | |
| } | |
| ext4_write_lock_xattr(inode, &no_expand); | |
| kaddr = kmap_atomic(page); | |
| ext4_write_inline_data(inode, &iloc, kaddr, 0, len); | |
| kunmap_atomic(kaddr); | |
| ext4_write_unlock_xattr(inode, &no_expand); | |
| return iloc.bh; | |
| } | |
| /* | |
| * Try to make the page cache and handle ready for the inline data case. | |
| * We can call this function in 2 cases: | |
| * 1. The inode is created and the first write exceeds inline size. We can | |
| * clear the inode state safely. | |
| * 2. The inode has inline data, then we need to read the data, make it | |
| * update and dirty so that ext4_da_writepages can handle it. We don't | |
| * need to start the journal since the file's metatdata isn't changed now. | |
| */ | |
| static int ext4_da_convert_inline_data_to_extent(struct address_space *mapping, | |
| struct inode *inode, | |
| unsigned flags, | |
| void **fsdata) | |
| { | |
| int ret = 0, inline_size; | |
| struct page *page; | |
| page = grab_cache_page_write_begin(mapping, 0, flags); | |
| if (!page) | |
| return -ENOMEM; | |
| down_read(&EXT4_I(inode)->xattr_sem); | |
| if (!ext4_has_inline_data(inode)) { | |
| ext4_clear_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA); | |
| goto out; | |
| } | |
| inline_size = ext4_get_inline_size(inode); | |
| if (!PageUptodate(page)) { | |
| ret = ext4_read_inline_page(inode, page); | |
| if (ret < 0) | |
| goto out; | |
| } | |
| ret = __block_write_begin(page, 0, inline_size, | |
| ext4_da_get_block_prep); | |
| if (ret) { | |
| up_read(&EXT4_I(inode)->xattr_sem); | |
| unlock_page(page); | |
| put_page(page); | |
| ext4_truncate_failed_write(inode); | |
| return ret; | |
| } | |
| SetPageDirty(page); | |
| SetPageUptodate(page); | |
| ext4_clear_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA); | |
| *fsdata = (void *)CONVERT_INLINE_DATA; | |
| out: | |
| up_read(&EXT4_I(inode)->xattr_sem); | |
| if (page) { | |
| unlock_page(page); | |
| put_page(page); | |
| } | |
| return ret; | |
| } | |
| /* | |
| * Prepare the write for the inline data. | |
| * If the data can be written into the inode, we just read | |
| * the page and make it uptodate, and start the journal. | |
| * Otherwise read the page, makes it dirty so that it can be | |
| * handle in writepages(the i_disksize update is left to the | |
| * normal ext4_da_write_end). | |
| */ | |
| int ext4_da_write_inline_data_begin(struct address_space *mapping, | |
| struct inode *inode, | |
| loff_t pos, unsigned len, | |
| unsigned flags, | |
| struct page **pagep, | |
| void **fsdata) | |
| { | |
| int ret, inline_size; | |
| handle_t *handle; | |
| struct page *page; | |
| struct ext4_iloc iloc; | |
| int retries = 0; | |
| ret = ext4_get_inode_loc(inode, &iloc); | |
| if (ret) | |
| return ret; | |
| retry_journal: | |
| handle = ext4_journal_start(inode, EXT4_HT_INODE, 1); | |
| if (IS_ERR(handle)) { | |
| ret = PTR_ERR(handle); | |
| goto out; | |
| } | |
| inline_size = ext4_get_max_inline_size(inode); | |
| ret = -ENOSPC; | |
| if (inline_size >= pos + len) { | |
| ret = ext4_prepare_inline_data(handle, inode, pos + len); | |
| if (ret && ret != -ENOSPC) | |
| goto out_journal; | |
| } | |
| /* | |
| * We cannot recurse into the filesystem as the transaction | |
| * is already started. | |
| */ | |
| flags |= AOP_FLAG_NOFS; | |
| if (ret == -ENOSPC) { | |
| ext4_journal_stop(handle); | |
| ret = ext4_da_convert_inline_data_to_extent(mapping, | |
| inode, | |
| flags, | |
| fsdata); | |
| if (ret == -ENOSPC && | |
| ext4_should_retry_alloc(inode->i_sb, &retries)) | |
| goto retry_journal; | |
| goto out; | |
| } | |
| page = grab_cache_page_write_begin(mapping, 0, flags); | |
| if (!page) { | |
| ret = -ENOMEM; | |
| goto out_journal; | |
| } | |
| down_read(&EXT4_I(inode)->xattr_sem); | |
| if (!ext4_has_inline_data(inode)) { | |
| ret = 0; | |
| goto out_release_page; | |
| } | |
| if (!PageUptodate(page)) { | |
| ret = ext4_read_inline_page(inode, page); | |
| if (ret < 0) | |
| goto out_release_page; | |
| } | |
| ret = ext4_journal_get_write_access(handle, iloc.bh); | |
| if (ret) | |
| goto out_release_page; | |
| up_read(&EXT4_I(inode)->xattr_sem); | |
| *pagep = page; | |
| brelse(iloc.bh); | |
| return 1; | |
| out_release_page: | |
| up_read(&EXT4_I(inode)->xattr_sem); | |
| unlock_page(page); | |
| put_page(page); | |
| out_journal: | |
| ext4_journal_stop(handle); | |
| out: | |
| brelse(iloc.bh); | |
| return ret; | |
| } | |
| int ext4_da_write_inline_data_end(struct inode *inode, loff_t pos, | |
| unsigned len, unsigned copied, | |
| struct page *page) | |
| { | |
| int ret; | |
| ret = ext4_write_inline_data_end(inode, pos, len, copied, page); | |
| if (ret < 0) { | |
| unlock_page(page); | |
| put_page(page); | |
| return ret; | |
| } | |
| copied = ret; | |
| /* | |
| * No need to use i_size_read() here, the i_size | |
| * cannot change under us because we hold i_mutex. | |
| * | |
| * But it's important to update i_size while still holding page lock: | |
| * page writeout could otherwise come in and zero beyond i_size. | |
| */ | |
| if (pos+copied > inode->i_size) | |
| i_size_write(inode, pos+copied); | |
| unlock_page(page); | |
| put_page(page); | |
| /* | |
| * Don't mark the inode dirty under page lock. First, it unnecessarily | |
| * makes the holding time of page lock longer. Second, it forces lock | |
| * ordering of page lock and transaction start for journaling | |
| * filesystems. | |
| */ | |
| mark_inode_dirty(inode); | |
| return copied; | |
| } | |
| #ifdef INLINE_DIR_DEBUG | |
| void ext4_show_inline_dir(struct inode *dir, struct buffer_head *bh, | |
| void *inline_start, int inline_size) | |
| { | |
| int offset; | |
| unsigned short de_len; | |
| struct ext4_dir_entry_2 *de = inline_start; | |
| void *dlimit = inline_start + inline_size; | |
| trace_printk("inode %lu\n", dir->i_ino); | |
| offset = 0; | |
| while ((void *)de < dlimit) { | |
| de_len = ext4_rec_len_from_disk(de->rec_len, inline_size); | |
| trace_printk("de: off %u rlen %u name %.*s nlen %u ino %u\n", | |
| offset, de_len, de->name_len, de->name, | |
| de->name_len, le32_to_cpu(de->inode)); | |
| if (ext4_check_dir_entry(dir, NULL, de, bh, | |
| inline_start, inline_size, offset)) | |
| BUG(); | |
| offset += de_len; | |
| de = (struct ext4_dir_entry_2 *) ((char *) de + de_len); | |
| } | |
| } | |
| #else | |
| #define ext4_show_inline_dir(dir, bh, inline_start, inline_size) | |
| #endif | |
| /* | |
| * Add a new entry into a inline dir. | |
| * It will return -ENOSPC if no space is available, and -EIO | |
| * and -EEXIST if directory entry already exists. | |
| */ | |
| static int ext4_add_dirent_to_inline(handle_t *handle, | |
| struct ext4_filename *fname, | |
| struct inode *dir, | |
| struct inode *inode, | |
| struct ext4_iloc *iloc, | |
| void *inline_start, int inline_size) | |
| { | |
| int err; | |
| struct ext4_dir_entry_2 *de; | |
| err = ext4_find_dest_de(dir, inode, iloc->bh, inline_start, | |
| inline_size, fname, &de); | |
| if (err) | |
| return err; | |
| BUFFER_TRACE(iloc->bh, "get_write_access"); | |
| err = ext4_journal_get_write_access(handle, iloc->bh); | |
| if (err) | |
| return err; | |
| ext4_insert_dentry(inode, de, inline_size, fname); | |
| ext4_show_inline_dir(dir, iloc->bh, inline_start, inline_size); | |
| /* | |
| * XXX shouldn't update any times until successful | |
| * completion of syscall, but too many callers depend | |
| * on this. | |
| * | |
| * XXX similarly, too many callers depend on | |
| * ext4_new_inode() setting the times, but error | |
| * recovery deletes the inode, so the worst that can | |
| * happen is that the times are slightly out of date | |
| * and/or different from the directory change time. | |
| */ | |
| dir->i_mtime = dir->i_ctime = current_time(dir); | |
| ext4_update_dx_flag(dir); | |
| inode_inc_iversion(dir); | |
| return 1; | |
| } | |
| static void *ext4_get_inline_xattr_pos(struct inode *inode, | |
| struct ext4_iloc *iloc) | |
| { | |
| struct ext4_xattr_entry *entry; | |
| struct ext4_xattr_ibody_header *header; | |
| BUG_ON(!EXT4_I(inode)->i_inline_off); | |
| header = IHDR(inode, ext4_raw_inode(iloc)); | |
| entry = (struct ext4_xattr_entry *)((void *)ext4_raw_inode(iloc) + | |
| EXT4_I(inode)->i_inline_off); | |
| return (void *)IFIRST(header) + le16_to_cpu(entry->e_value_offs); | |
| } | |
| /* Set the final de to cover the whole block. */ | |
| static void ext4_update_final_de(void *de_buf, int old_size, int new_size) | |
| { | |
| struct ext4_dir_entry_2 *de, *prev_de; | |
| void *limit; | |
| int de_len; | |
| de = (struct ext4_dir_entry_2 *)de_buf; | |
| if (old_size) { | |
| limit = de_buf + old_size; | |
| do { | |
| prev_de = de; | |
| de_len = ext4_rec_len_from_disk(de->rec_len, old_size); | |
| de_buf += de_len; | |
| de = (struct ext4_dir_entry_2 *)de_buf; | |
| } while (de_buf < limit); | |
| prev_de->rec_len = ext4_rec_len_to_disk(de_len + new_size - | |
| old_size, new_size); | |
| } else { | |
| /* this is just created, so create an empty entry. */ | |
| de->inode = 0; | |
| de->rec_len = ext4_rec_len_to_disk(new_size, new_size); | |
| } | |
| } | |
| static int ext4_update_inline_dir(handle_t *handle, struct inode *dir, | |
| struct ext4_iloc *iloc) | |
| { | |
| int ret; | |
| int old_size = EXT4_I(dir)->i_inline_size - EXT4_MIN_INLINE_DATA_SIZE; | |
| int new_size = get_max_inline_xattr_value_size(dir, iloc); | |
| if (new_size - old_size <= EXT4_DIR_REC_LEN(1)) | |
| return -ENOSPC; | |
| ret = ext4_update_inline_data(handle, dir, | |
| new_size + EXT4_MIN_INLINE_DATA_SIZE); | |
| if (ret) | |
| return ret; | |
| ext4_update_final_de(ext4_get_inline_xattr_pos(dir, iloc), old_size, | |
| EXT4_I(dir)->i_inline_size - | |
| EXT4_MIN_INLINE_DATA_SIZE); | |
| dir->i_size = EXT4_I(dir)->i_disksize = EXT4_I(dir)->i_inline_size; | |
| return 0; | |
| } | |
| static void ext4_restore_inline_data(handle_t *handle, struct inode *inode, | |
| struct ext4_iloc *iloc, | |
| void *buf, int inline_size) | |
| { | |
| ext4_create_inline_data(handle, inode, inline_size); | |
| ext4_write_inline_data(inode, iloc, buf, 0, inline_size); | |
| ext4_set_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA); | |
| } | |
| static int ext4_finish_convert_inline_dir(handle_t *handle, | |
| struct inode *inode, | |
| struct buffer_head *dir_block, | |
| void *buf, | |
| int inline_size) | |
| { | |
| int err, csum_size = 0, header_size = 0; | |
| struct ext4_dir_entry_2 *de; | |
| void *target = dir_block->b_data; | |
| /* | |
| * First create "." and ".." and then copy the dir information | |
| * back to the block. | |
| */ | |
| de = (struct ext4_dir_entry_2 *)target; | |
| de = ext4_init_dot_dotdot(inode, de, | |
| inode->i_sb->s_blocksize, csum_size, | |
| le32_to_cpu(((struct ext4_dir_entry_2 *)buf)->inode), 1); | |
| header_size = (void *)de - target; | |
| memcpy((void *)de, buf + EXT4_INLINE_DOTDOT_SIZE, | |
| inline_size - EXT4_INLINE_DOTDOT_SIZE); | |
| if (ext4_has_metadata_csum(inode->i_sb)) | |
| csum_size = sizeof(struct ext4_dir_entry_tail); | |
| inode->i_size = inode->i_sb->s_blocksize; | |
| i_size_write(inode, inode->i_sb->s_blocksize); | |
| EXT4_I(inode)->i_disksize = inode->i_sb->s_blocksize; | |
| ext4_update_final_de(dir_block->b_data, | |
| inline_size - EXT4_INLINE_DOTDOT_SIZE + header_size, | |
| inode->i_sb->s_blocksize - csum_size); | |
| if (csum_size) | |
| ext4_initialize_dirent_tail(dir_block, | |
| inode->i_sb->s_blocksize); | |
| set_buffer_uptodate(dir_block); | |
| err = ext4_handle_dirty_dirblock(handle, inode, dir_block); | |
| if (err) | |
| return err; | |
| set_buffer_verified(dir_block); | |
| return ext4_mark_inode_dirty(handle, inode); | |
| } | |
| static int ext4_convert_inline_data_nolock(handle_t *handle, | |
| struct inode *inode, | |
| struct ext4_iloc *iloc) | |
| { | |
| int error; | |
| void *buf = NULL; | |
| struct buffer_head *data_bh = NULL; | |
| struct ext4_map_blocks map; | |
| int inline_size; | |
| inline_size = ext4_get_inline_size(inode); | |
| buf = kmalloc(inline_size, GFP_NOFS); | |
| if (!buf) { | |
| error = -ENOMEM; | |
| goto out; | |
| } | |
| error = ext4_read_inline_data(inode, buf, inline_size, iloc); | |
| if (error < 0) | |
| goto out; | |
| /* | |
| * Make sure the inline directory entries pass checks before we try to | |
| * convert them, so that we avoid touching stuff that needs fsck. | |
| */ | |
| if (S_ISDIR(inode->i_mode)) { | |
| error = ext4_check_all_de(inode, iloc->bh, | |
| buf + EXT4_INLINE_DOTDOT_SIZE, | |
| inline_size - EXT4_INLINE_DOTDOT_SIZE); | |
| if (error) | |
| goto out; | |
| } | |
| error = ext4_destroy_inline_data_nolock(handle, inode); | |
| if (error) | |
| goto out; | |
| map.m_lblk = 0; | |
| map.m_len = 1; | |
| map.m_flags = 0; | |
| error = ext4_map_blocks(handle, inode, &map, EXT4_GET_BLOCKS_CREATE); | |
| if (error < 0) | |
| goto out_restore; | |
| if (!(map.m_flags & EXT4_MAP_MAPPED)) { | |
| error = -EIO; | |
| goto out_restore; | |
| } | |
| data_bh = sb_getblk(inode->i_sb, map.m_pblk); | |
| if (!data_bh) { | |
| error = -ENOMEM; | |
| goto out_restore; | |
| } | |
| lock_buffer(data_bh); | |
| error = ext4_journal_get_create_access(handle, data_bh); | |
| if (error) { | |
| unlock_buffer(data_bh); | |
| error = -EIO; | |
| goto out_restore; | |
| } | |
| memset(data_bh->b_data, 0, inode->i_sb->s_blocksize); | |
| if (!S_ISDIR(inode->i_mode)) { | |
| memcpy(data_bh->b_data, buf, inline_size); | |
| set_buffer_uptodate(data_bh); | |
| error = ext4_handle_dirty_metadata(handle, | |
| inode, data_bh); | |
| } else { | |
| error = ext4_finish_convert_inline_dir(handle, inode, data_bh, | |
| buf, inline_size); | |
| } | |
| unlock_buffer(data_bh); | |
| out_restore: | |
| if (error) | |
| ext4_restore_inline_data(handle, inode, iloc, buf, inline_size); | |
| out: | |
| brelse(data_bh); | |
| kfree(buf); | |
| return error; | |
| } | |
| /* | |
| * Try to add the new entry to the inline data. | |
| * If succeeds, return 0. If not, extended the inline dir and copied data to | |
| * the new created block. | |
| */ | |
| int ext4_try_add_inline_entry(handle_t *handle, struct ext4_filename *fname, | |
| struct inode *dir, struct inode *inode) | |
| { | |
| int ret, ret2, inline_size, no_expand; | |
| void *inline_start; | |
| struct ext4_iloc iloc; | |
| ret = ext4_get_inode_loc(dir, &iloc); | |
| if (ret) | |
| return ret; | |
| ext4_write_lock_xattr(dir, &no_expand); | |
| if (!ext4_has_inline_data(dir)) | |
| goto out; | |
| inline_start = (void *)ext4_raw_inode(&iloc)->i_block + | |
| EXT4_INLINE_DOTDOT_SIZE; | |
| inline_size = EXT4_MIN_INLINE_DATA_SIZE - EXT4_INLINE_DOTDOT_SIZE; | |
| ret = ext4_add_dirent_to_inline(handle, fname, dir, inode, &iloc, | |
| inline_start, inline_size); | |
| if (ret != -ENOSPC) | |
| goto out; | |
| /* check whether it can be inserted to inline xattr space. */ | |
| inline_size = EXT4_I(dir)->i_inline_size - | |
| EXT4_MIN_INLINE_DATA_SIZE; | |
| if (!inline_size) { | |
| /* Try to use the xattr space.*/ | |
| ret = ext4_update_inline_dir(handle, dir, &iloc); | |
| if (ret && ret != -ENOSPC) | |
| goto out; | |
| inline_size = EXT4_I(dir)->i_inline_size - | |
| EXT4_MIN_INLINE_DATA_SIZE; | |
| } | |
| if (inline_size) { | |
| inline_start = ext4_get_inline_xattr_pos(dir, &iloc); | |
| ret = ext4_add_dirent_to_inline(handle, fname, dir, | |
| inode, &iloc, inline_start, | |
| inline_size); | |
| if (ret != -ENOSPC) | |
| goto out; | |
| } | |
| /* | |
| * The inline space is filled up, so create a new block for it. | |
| * As the extent tree will be created, we have to save the inline | |
| * dir first. | |
| */ | |
| ret = ext4_convert_inline_data_nolock(handle, dir, &iloc); | |
| out: | |
| ext4_write_unlock_xattr(dir, &no_expand); | |
| ret2 = ext4_mark_inode_dirty(handle, dir); | |
| if (unlikely(ret2 && !ret)) | |
| ret = ret2; | |
| brelse(iloc.bh); | |
| return ret; | |
| } | |
| /* | |
| * This function fills a red-black tree with information from an | |
| * inlined dir. It returns the number directory entries loaded | |
| * into the tree. If there is an error it is returned in err. | |
| */ | |
| int ext4_inlinedir_to_tree(struct file *dir_file, | |
| struct inode *dir, ext4_lblk_t block, | |
| struct dx_hash_info *hinfo, | |
| __u32 start_hash, __u32 start_minor_hash, | |
| int *has_inline_data) | |
| { | |
| int err = 0, count = 0; | |
| unsigned int parent_ino; | |
| int pos; | |
| struct ext4_dir_entry_2 *de; | |
| struct inode *inode = file_inode(dir_file); | |
| int ret, inline_size = 0; | |
| struct ext4_iloc iloc; | |
| void *dir_buf = NULL; | |
| struct ext4_dir_entry_2 fake; | |
| struct fscrypt_str tmp_str; | |
| ret = ext4_get_inode_loc(inode, &iloc); | |
| if (ret) | |
| return ret; | |
| down_read(&EXT4_I(inode)->xattr_sem); | |
| if (!ext4_has_inline_data(inode)) { | |
| up_read(&EXT4_I(inode)->xattr_sem); | |
| *has_inline_data = 0; | |
| goto out; | |
| } | |
| inline_size = ext4_get_inline_size(inode); | |
| dir_buf = kmalloc(inline_size, GFP_NOFS); | |
| if (!dir_buf) { | |
| ret = -ENOMEM; | |
| up_read(&EXT4_I(inode)->xattr_sem); | |
| goto out; | |
| } | |
| ret = ext4_read_inline_data(inode, dir_buf, inline_size, &iloc); | |
| up_read(&EXT4_I(inode)->xattr_sem); | |
| if (ret < 0) | |
| goto out; | |
| pos = 0; | |
| parent_ino = le32_to_cpu(((struct ext4_dir_entry_2 *)dir_buf)->inode); | |
| while (pos < inline_size) { | |
| /* | |
| * As inlined dir doesn't store any information about '.' and | |
| * only the inode number of '..' is stored, we have to handle | |
| * them differently. | |
| */ | |
| if (pos == 0) { | |
| fake.inode = cpu_to_le32(inode->i_ino); | |
| fake.name_len = 1; | |
| strcpy(fake.name, "."); | |
| fake.rec_len = ext4_rec_len_to_disk( | |
| EXT4_DIR_REC_LEN(fake.name_len), | |
| inline_size); | |
| ext4_set_de_type(inode->i_sb, &fake, S_IFDIR); | |
| de = &fake; | |
| pos = EXT4_INLINE_DOTDOT_OFFSET; | |
| } else if (pos == EXT4_INLINE_DOTDOT_OFFSET) { | |
| fake.inode = cpu_to_le32(parent_ino); | |
| fake.name_len = 2; | |
| strcpy(fake.name, ".."); | |
| fake.rec_len = ext4_rec_len_to_disk( | |
| EXT4_DIR_REC_LEN(fake.name_len), | |
| inline_size); | |
| ext4_set_de_type(inode->i_sb, &fake, S_IFDIR); | |
| de = &fake; | |
| pos = EXT4_INLINE_DOTDOT_SIZE; | |
| } else { | |
| de = (struct ext4_dir_entry_2 *)(dir_buf + pos); | |
| pos += ext4_rec_len_from_disk(de->rec_len, inline_size); | |
| if (ext4_check_dir_entry(inode, dir_file, de, | |
| iloc.bh, dir_buf, | |
| inline_size, pos)) { | |
| ret = count; | |
| goto out; | |
| } | |
| } | |
| ext4fs_dirhash(dir, de->name, de->name_len, hinfo); | |
| if ((hinfo->hash < start_hash) || | |
| ((hinfo->hash == start_hash) && | |
| (hinfo->minor_hash < start_minor_hash))) | |
| continue; | |
| if (de->inode == 0) | |
| continue; | |
| tmp_str.name = de->name; | |
| tmp_str.len = de->name_len; | |
| err = ext4_htree_store_dirent(dir_file, hinfo->hash, | |
| hinfo->minor_hash, de, &tmp_str); | |
| if (err) { | |
| ret = err; | |
| goto out; | |
| } | |
| count++; | |
| } | |
| ret = count; | |
| out: | |
| kfree(dir_buf); | |
| brelse(iloc.bh); | |
| return ret; | |
| } | |
| /* | |
| * So this function is called when the volume is mkfsed with | |
| * dir_index disabled. In order to keep f_pos persistent | |
| * after we convert from an inlined dir to a blocked based, | |
| * we just pretend that we are a normal dir and return the | |
| * offset as if '.' and '..' really take place. | |
| * | |
| */ | |
| int ext4_read_inline_dir(struct file *file, | |
| struct dir_context *ctx, | |
| int *has_inline_data) | |
| { | |
| unsigned int offset, parent_ino; | |
| int i; | |
| struct ext4_dir_entry_2 *de; | |
| struct super_block *sb; | |
| struct inode *inode = file_inode(file); | |
| int ret, inline_size = 0; | |
| struct ext4_iloc iloc; | |
| void *dir_buf = NULL; | |
| int dotdot_offset, dotdot_size, extra_offset, extra_size; | |
| ret = ext4_get_inode_loc(inode, &iloc); | |
| if (ret) | |
| return ret; | |
| down_read(&EXT4_I(inode)->xattr_sem); | |
| if (!ext4_has_inline_data(inode)) { | |
| up_read(&EXT4_I(inode)->xattr_sem); | |
| *has_inline_data = 0; | |
| goto out; | |
| } | |
| inline_size = ext4_get_inline_size(inode); | |
| dir_buf = kmalloc(inline_size, GFP_NOFS); | |
| if (!dir_buf) { | |
| ret = -ENOMEM; | |
| up_read(&EXT4_I(inode)->xattr_sem); | |
| goto out; | |
| } | |
| ret = ext4_read_inline_data(inode, dir_buf, inline_size, &iloc); | |
| up_read(&EXT4_I(inode)->xattr_sem); | |
| if (ret < 0) | |
| goto out; | |
| ret = 0; | |
| sb = inode->i_sb; | |
| parent_ino = le32_to_cpu(((struct ext4_dir_entry_2 *)dir_buf)->inode); | |
| offset = ctx->pos; | |
| /* | |
| * dotdot_offset and dotdot_size is the real offset and | |
| * size for ".." and "." if the dir is block based while | |
| * the real size for them are only EXT4_INLINE_DOTDOT_SIZE. | |
| * So we will use extra_offset and extra_size to indicate them | |
| * during the inline dir iteration. | |
| */ | |
| dotdot_offset = EXT4_DIR_REC_LEN(1); | |
| dotdot_size = dotdot_offset + EXT4_DIR_REC_LEN(2); | |
| extra_offset = dotdot_size - EXT4_INLINE_DOTDOT_SIZE; | |
| extra_size = extra_offset + inline_size; | |
| /* | |
| * If the version has changed since the last call to | |
| * readdir(2), then we might be pointing to an invalid | |
| * dirent right now. Scan from the start of the inline | |
| * dir to make sure. | |
| */ | |
| if (!inode_eq_iversion(inode, file->f_version)) { | |
| for (i = 0; i < extra_size && i < offset;) { | |
| /* | |
| * "." is with offset 0 and | |
| * ".." is dotdot_offset. | |
| */ | |
| if (!i) { | |
| i = dotdot_offset; | |
| continue; | |
| } else if (i == dotdot_offset) { | |
| i = dotdot_size; | |
| continue; | |
| } | |
| /* for other entry, the real offset in | |
| * the buf has to be tuned accordingly. | |
| */ | |
| de = (struct ext4_dir_entry_2 *) | |
| (dir_buf + i - extra_offset); | |
| /* It's too expensive to do a full | |
| * dirent test each time round this | |
| * loop, but we do have to test at | |
| * least that it is non-zero. A | |
| * failure will be detected in the | |
| * dirent test below. */ | |
| if (ext4_rec_len_from_disk(de->rec_len, extra_size) | |
| < EXT4_DIR_REC_LEN(1)) | |
| break; | |
| i += ext4_rec_len_from_disk(de->rec_len, | |
| extra_size); | |
| } | |
| offset = i; | |
| ctx->pos = offset; | |
| file->f_version = inode_query_iversion(inode); | |
| } | |
| while (ctx->pos < extra_size) { | |
| if (ctx->pos == 0) { | |
| if (!dir_emit(ctx, ".", 1, inode->i_ino, DT_DIR)) | |
| goto out; | |
| ctx->pos = dotdot_offset; | |
| continue; | |
| } | |
| if (ctx->pos == dotdot_offset) { | |
| if (!dir_emit(ctx, "..", 2, parent_ino, DT_DIR)) | |
| goto out; | |
| ctx->pos = dotdot_size; | |
| continue; | |
| } | |
| de = (struct ext4_dir_entry_2 *) | |
| (dir_buf + ctx->pos - extra_offset); | |
| if (ext4_check_dir_entry(inode, file, de, iloc.bh, dir_buf, | |
| extra_size, ctx->pos)) | |
| goto out; | |
| if (le32_to_cpu(de->inode)) { | |
| if (!dir_emit(ctx, de->name, de->name_len, | |
| le32_to_cpu(de->inode), | |
| get_dtype(sb, de->file_type))) | |
| goto out; | |
| } | |
| ctx->pos += ext4_rec_len_from_disk(de->rec_len, extra_size); | |
| } | |
| out: | |
| kfree(dir_buf); | |
| brelse(iloc.bh); | |
| return ret; | |
| } | |
| struct buffer_head *ext4_get_first_inline_block(struct inode *inode, | |
| struct ext4_dir_entry_2 **parent_de, | |
| int *retval) | |
| { | |
| struct ext4_iloc iloc; | |
| *retval = ext4_get_inode_loc(inode, &iloc); | |
| if (*retval) | |
| return NULL; | |
| *parent_de = (struct ext4_dir_entry_2 *)ext4_raw_inode(&iloc)->i_block; | |
| return iloc.bh; | |
| } | |
| /* | |
| * Try to create the inline data for the new dir. | |
| * If it succeeds, return 0, otherwise return the error. | |
| * In case of ENOSPC, the caller should create the normal disk layout dir. | |
| */ | |
| int ext4_try_create_inline_dir(handle_t *handle, struct inode *parent, | |
| struct inode *inode) | |
| { | |
| int ret, inline_size = EXT4_MIN_INLINE_DATA_SIZE; | |
| struct ext4_iloc iloc; | |
| struct ext4_dir_entry_2 *de; | |
| ret = ext4_get_inode_loc(inode, &iloc); | |
| if (ret) | |
| return ret; | |
| ret = ext4_prepare_inline_data(handle, inode, inline_size); | |
| if (ret) | |
| goto out; | |
| /* | |
| * For inline dir, we only save the inode information for the ".." | |
| * and create a fake dentry to cover the left space. | |
| */ | |
| de = (struct ext4_dir_entry_2 *)ext4_raw_inode(&iloc)->i_block; | |
| de->inode = cpu_to_le32(parent->i_ino); | |
| de = (struct ext4_dir_entry_2 *)((void *)de + EXT4_INLINE_DOTDOT_SIZE); | |
| de->inode = 0; | |
| de->rec_len = ext4_rec_len_to_disk( | |
| inline_size - EXT4_INLINE_DOTDOT_SIZE, | |
| inline_size); | |
| set_nlink(inode, 2); | |
| inode->i_size = EXT4_I(inode)->i_disksize = inline_size; | |
| out: | |
| brelse(iloc.bh); | |
| return ret; | |
| } | |
| struct buffer_head *ext4_find_inline_entry(struct inode *dir, | |
| struct ext4_filename *fname, | |
| struct ext4_dir_entry_2 **res_dir, | |
| int *has_inline_data) | |
| { | |
| int ret; | |
| struct ext4_iloc iloc; | |
| void *inline_start; | |
| int inline_size; | |
| if (ext4_get_inode_loc(dir, &iloc)) | |
| return NULL; | |
| down_read(&EXT4_I(dir)->xattr_sem); | |
| if (!ext4_has_inline_data(dir)) { | |
| *has_inline_data = 0; | |
| goto out; | |
| } | |
| inline_start = (void *)ext4_raw_inode(&iloc)->i_block + | |
| EXT4_INLINE_DOTDOT_SIZE; | |
| inline_size = EXT4_MIN_INLINE_DATA_SIZE - EXT4_INLINE_DOTDOT_SIZE; | |
| ret = ext4_search_dir(iloc.bh, inline_start, inline_size, | |
| dir, fname, 0, res_dir); | |
| if (ret == 1) | |
| goto out_find; | |
| if (ret < 0) | |
| goto out; | |
| if (ext4_get_inline_size(dir) == EXT4_MIN_INLINE_DATA_SIZE) | |
| goto out; | |
| inline_start = ext4_get_inline_xattr_pos(dir, &iloc); | |
| inline_size = ext4_get_inline_size(dir) - EXT4_MIN_INLINE_DATA_SIZE; | |
| ret = ext4_search_dir(iloc.bh, inline_start, inline_size, | |
| dir, fname, 0, res_dir); | |
| if (ret == 1) | |
| goto out_find; | |
| out: | |
| brelse(iloc.bh); | |
| iloc.bh = NULL; | |
| out_find: | |
| up_read(&EXT4_I(dir)->xattr_sem); | |
| return iloc.bh; | |
| } | |
| int ext4_delete_inline_entry(handle_t *handle, | |
| struct inode *dir, | |
| struct ext4_dir_entry_2 *de_del, | |
| struct buffer_head *bh, | |
| int *has_inline_data) | |
| { | |
| int err, inline_size, no_expand; | |
| struct ext4_iloc iloc; | |
| void *inline_start; | |
| err = ext4_get_inode_loc(dir, &iloc); | |
| if (err) | |
| return err; | |
| ext4_write_lock_xattr(dir, &no_expand); | |
| if (!ext4_has_inline_data(dir)) { | |
| *has_inline_data = 0; | |
| goto out; | |
| } | |
| if ((void *)de_del - ((void *)ext4_raw_inode(&iloc)->i_block) < | |
| EXT4_MIN_INLINE_DATA_SIZE) { | |
| inline_start = (void *)ext4_raw_inode(&iloc)->i_block + | |
| EXT4_INLINE_DOTDOT_SIZE; | |
| inline_size = EXT4_MIN_INLINE_DATA_SIZE - | |
| EXT4_INLINE_DOTDOT_SIZE; | |
| } else { | |
| inline_start = ext4_get_inline_xattr_pos(dir, &iloc); | |
| inline_size = ext4_get_inline_size(dir) - | |
| EXT4_MIN_INLINE_DATA_SIZE; | |
| } | |
| BUFFER_TRACE(bh, "get_write_access"); | |
| err = ext4_journal_get_write_access(handle, bh); | |
| if (err) | |
| goto out; | |
| err = ext4_generic_delete_entry(dir, de_del, bh, | |
| inline_start, inline_size, 0); | |
| if (err) | |
| goto out; | |
| ext4_show_inline_dir(dir, iloc.bh, inline_start, inline_size); | |
| out: | |
| ext4_write_unlock_xattr(dir, &no_expand); | |
| if (likely(err == 0)) | |
| err = ext4_mark_inode_dirty(handle, dir); | |
| brelse(iloc.bh); | |
| if (err != -ENOENT) | |
| ext4_std_error(dir->i_sb, err); | |
| return err; | |
| } | |
| /* | |
| * Get the inline dentry at offset. | |
| */ | |
| static inline struct ext4_dir_entry_2 * | |
| ext4_get_inline_entry(struct inode *inode, | |
| struct ext4_iloc *iloc, | |
| unsigned int offset, | |
| void **inline_start, | |
| int *inline_size) | |
| { | |
| void *inline_pos; | |
| BUG_ON(offset > ext4_get_inline_size(inode)); | |
| if (offset < EXT4_MIN_INLINE_DATA_SIZE) { | |
| inline_pos = (void *)ext4_raw_inode(iloc)->i_block; | |
| *inline_size = EXT4_MIN_INLINE_DATA_SIZE; | |
| } else { | |
| inline_pos = ext4_get_inline_xattr_pos(inode, iloc); | |
| offset -= EXT4_MIN_INLINE_DATA_SIZE; | |
| *inline_size = ext4_get_inline_size(inode) - | |
| EXT4_MIN_INLINE_DATA_SIZE; | |
| } | |
| if (inline_start) | |
| *inline_start = inline_pos; | |
| return (struct ext4_dir_entry_2 *)(inline_pos + offset); | |
| } | |
| bool empty_inline_dir(struct inode *dir, int *has_inline_data) | |
| { | |
| int err, inline_size; | |
| struct ext4_iloc iloc; | |
| size_t inline_len; | |
| void *inline_pos; | |
| unsigned int offset; | |
| struct ext4_dir_entry_2 *de; | |
| bool ret = true; | |
| err = ext4_get_inode_loc(dir, &iloc); | |
| if (err) { | |
| EXT4_ERROR_INODE_ERR(dir, -err, | |
| "error %d getting inode %lu block", | |
| err, dir->i_ino); | |
| return true; | |
| } | |
| down_read(&EXT4_I(dir)->xattr_sem); | |
| if (!ext4_has_inline_data(dir)) { | |
| *has_inline_data = 0; | |
| goto out; | |
| } | |
| de = (struct ext4_dir_entry_2 *)ext4_raw_inode(&iloc)->i_block; | |
| if (!le32_to_cpu(de->inode)) { | |
| ext4_warning(dir->i_sb, | |
| "bad inline directory (dir #%lu) - no `..'", | |
| dir->i_ino); | |
| ret = true; | |
| goto out; | |
| } | |
| inline_len = ext4_get_inline_size(dir); | |
| offset = EXT4_INLINE_DOTDOT_SIZE; | |
| while (offset < inline_len) { | |
| de = ext4_get_inline_entry(dir, &iloc, offset, | |
| &inline_pos, &inline_size); | |
| if (ext4_check_dir_entry(dir, NULL, de, | |
| iloc.bh, inline_pos, | |
| inline_size, offset)) { | |
| ext4_warning(dir->i_sb, | |
| "bad inline directory (dir #%lu) - " | |
| "inode %u, rec_len %u, name_len %d" | |
| "inline size %d", | |
| dir->i_ino, le32_to_cpu(de->inode), | |
| le16_to_cpu(de->rec_len), de->name_len, | |
| inline_size); | |
| ret = true; | |
| goto out; | |
| } | |
| if (le32_to_cpu(de->inode)) { | |
| ret = false; | |
| goto out; | |
| } | |
| offset += ext4_rec_len_from_disk(de->rec_len, inline_size); | |
| } | |
| out: | |
| up_read(&EXT4_I(dir)->xattr_sem); | |
| brelse(iloc.bh); | |
| return ret; | |
| } | |
| int ext4_destroy_inline_data(handle_t *handle, struct inode *inode) | |
| { | |
| int ret, no_expand; | |
| ext4_write_lock_xattr(inode, &no_expand); | |
| ret = ext4_destroy_inline_data_nolock(handle, inode); | |
| ext4_write_unlock_xattr(inode, &no_expand); | |
| return ret; | |
| } | |
| int ext4_inline_data_iomap(struct inode *inode, struct iomap *iomap) | |
| { | |
| __u64 addr; | |
| int error = -EAGAIN; | |
| struct ext4_iloc iloc; | |
| down_read(&EXT4_I(inode)->xattr_sem); | |
| if (!ext4_has_inline_data(inode)) | |
| goto out; | |
| error = ext4_get_inode_loc(inode, &iloc); | |
| if (error) | |
| goto out; | |
| addr = (__u64)iloc.bh->b_blocknr << inode->i_sb->s_blocksize_bits; | |
| addr += (char *)ext4_raw_inode(&iloc) - iloc.bh->b_data; | |
| addr += offsetof(struct ext4_inode, i_block); | |
| brelse(iloc.bh); | |
| iomap->addr = addr; | |
| iomap->offset = 0; | |
| iomap->length = min_t(loff_t, ext4_get_inline_size(inode), | |
| i_size_read(inode)); | |
| iomap->type = IOMAP_INLINE; | |
| iomap->flags = 0; | |
| out: | |
| up_read(&EXT4_I(inode)->xattr_sem); | |
| return error; | |
| } | |
| int ext4_inline_data_truncate(struct inode *inode, int *has_inline) | |
| { | |
| handle_t *handle; | |
| int inline_size, value_len, needed_blocks, no_expand, err = 0; | |
| size_t i_size; | |
| void *value = NULL; | |
| struct ext4_xattr_ibody_find is = { | |
| .s = { .not_found = -ENODATA, }, | |
| }; | |
| struct ext4_xattr_info i = { | |
| .name_index = EXT4_XATTR_INDEX_SYSTEM, | |
| .name = EXT4_XATTR_SYSTEM_DATA, | |
| }; | |
| needed_blocks = ext4_writepage_trans_blocks(inode); | |
| handle = ext4_journal_start(inode, EXT4_HT_INODE, needed_blocks); | |
| if (IS_ERR(handle)) | |
| return PTR_ERR(handle); | |
| ext4_write_lock_xattr(inode, &no_expand); | |
| if (!ext4_has_inline_data(inode)) { | |
| ext4_write_unlock_xattr(inode, &no_expand); | |
| *has_inline = 0; | |
| ext4_journal_stop(handle); | |
| return 0; | |
| } | |
| if ((err = ext4_orphan_add(handle, inode)) != 0) | |
| goto out; | |
| if ((err = ext4_get_inode_loc(inode, &is.iloc)) != 0) | |
| goto out; | |
| down_write(&EXT4_I(inode)->i_data_sem); | |
| i_size = inode->i_size; | |
| inline_size = ext4_get_inline_size(inode); | |
| EXT4_I(inode)->i_disksize = i_size; | |
| if (i_size < inline_size) { | |
| /* Clear the content in the xattr space. */ | |
| if (inline_size > EXT4_MIN_INLINE_DATA_SIZE) { | |
| if ((err = ext4_xattr_ibody_find(inode, &i, &is)) != 0) | |
| goto out_error; | |
| BUG_ON(is.s.not_found); | |
| value_len = le32_to_cpu(is.s.here->e_value_size); | |
| value = kmalloc(value_len, GFP_NOFS); | |
| if (!value) { | |
| err = -ENOMEM; | |
| goto out_error; | |
| } | |
| err = ext4_xattr_ibody_get(inode, i.name_index, | |
| i.name, value, value_len); | |
| if (err <= 0) | |
| goto out_error; | |
| i.value = value; | |
| i.value_len = i_size > EXT4_MIN_INLINE_DATA_SIZE ? | |
| i_size - EXT4_MIN_INLINE_DATA_SIZE : 0; | |
| err = ext4_xattr_ibody_inline_set(handle, inode, | |
| &i, &is); | |
| if (err) | |
| goto out_error; | |
| } | |
| /* Clear the content within i_blocks. */ | |
| if (i_size < EXT4_MIN_INLINE_DATA_SIZE) { | |
| void *p = (void *) ext4_raw_inode(&is.iloc)->i_block; | |
| memset(p + i_size, 0, | |
| EXT4_MIN_INLINE_DATA_SIZE - i_size); | |
| } | |
| EXT4_I(inode)->i_inline_size = i_size < | |
| EXT4_MIN_INLINE_DATA_SIZE ? | |
| EXT4_MIN_INLINE_DATA_SIZE : i_size; | |
| } | |
| out_error: | |
| up_write(&EXT4_I(inode)->i_data_sem); | |
| out: | |
| brelse(is.iloc.bh); | |
| ext4_write_unlock_xattr(inode, &no_expand); | |
| kfree(value); | |
| if (inode->i_nlink) | |
| ext4_orphan_del(handle, inode); | |
| if (err == 0) { | |
| inode->i_mtime = inode->i_ctime = current_time(inode); | |
| err = ext4_mark_inode_dirty(handle, inode); | |
| if (IS_SYNC(inode)) | |
| ext4_handle_sync(handle); | |
| } | |
| ext4_journal_stop(handle); | |
| return err; | |
| } | |
| int ext4_convert_inline_data(struct inode *inode) | |
| { | |
| int error, needed_blocks, no_expand; | |
| handle_t *handle; | |
| struct ext4_iloc iloc; | |
| if (!ext4_has_inline_data(inode)) { | |
| ext4_clear_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA); | |
| return 0; | |
| } | |
| needed_blocks = ext4_writepage_trans_blocks(inode); | |
| iloc.bh = NULL; | |
| error = ext4_get_inode_loc(inode, &iloc); | |
| if (error) | |
| return error; | |
| handle = ext4_journal_start(inode, EXT4_HT_WRITE_PAGE, needed_blocks); | |
| if (IS_ERR(handle)) { | |
| error = PTR_ERR(handle); | |
| goto out_free; | |
| } | |
| ext4_write_lock_xattr(inode, &no_expand); | |
| if (ext4_has_inline_data(inode)) | |
| error = ext4_convert_inline_data_nolock(handle, inode, &iloc); | |
| ext4_write_unlock_xattr(inode, &no_expand); | |
| ext4_journal_stop(handle); | |
| out_free: | |
| brelse(iloc.bh); | |
| return error; | |
| } |