| // SPDX-License-Identifier: GPL-2.0-only | |
| /* -*- mode: c; c-basic-offset: 8; -*- | |
| * vim: noexpandtab sw=8 ts=8 sts=0: | |
| * | |
| * stack_o2cb.c | |
| * | |
| * Code which interfaces ocfs2 with the o2cb stack. | |
| * | |
| * Copyright (C) 2007 Oracle. All rights reserved. | |
| */ | |
| #include <linux/kernel.h> | |
| #include <linux/crc32.h> | |
| #include <linux/slab.h> | |
| #include <linux/module.h> | |
| /* Needed for AOP_TRUNCATED_PAGE in mlog_errno() */ | |
| #include <linux/fs.h> | |
| #include "cluster/masklog.h" | |
| #include "cluster/nodemanager.h" | |
| #include "cluster/heartbeat.h" | |
| #include "cluster/tcp.h" | |
| #include "stackglue.h" | |
| struct o2dlm_private { | |
| struct dlm_eviction_cb op_eviction_cb; | |
| }; | |
| static struct ocfs2_stack_plugin o2cb_stack; | |
| /* These should be identical */ | |
| #if (DLM_LOCK_IV != LKM_IVMODE) | |
| # error Lock modes do not match | |
| #endif | |
| #if (DLM_LOCK_NL != LKM_NLMODE) | |
| # error Lock modes do not match | |
| #endif | |
| #if (DLM_LOCK_CR != LKM_CRMODE) | |
| # error Lock modes do not match | |
| #endif | |
| #if (DLM_LOCK_CW != LKM_CWMODE) | |
| # error Lock modes do not match | |
| #endif | |
| #if (DLM_LOCK_PR != LKM_PRMODE) | |
| # error Lock modes do not match | |
| #endif | |
| #if (DLM_LOCK_PW != LKM_PWMODE) | |
| # error Lock modes do not match | |
| #endif | |
| #if (DLM_LOCK_EX != LKM_EXMODE) | |
| # error Lock modes do not match | |
| #endif | |
| static inline int mode_to_o2dlm(int mode) | |
| { | |
| BUG_ON(mode > LKM_MAXMODE); | |
| return mode; | |
| } | |
| #define map_flag(_generic, _o2dlm) \ | |
| if (flags & (_generic)) { \ | |
| flags &= ~(_generic); \ | |
| o2dlm_flags |= (_o2dlm); \ | |
| } | |
| static int flags_to_o2dlm(u32 flags) | |
| { | |
| int o2dlm_flags = 0; | |
| map_flag(DLM_LKF_NOQUEUE, LKM_NOQUEUE); | |
| map_flag(DLM_LKF_CANCEL, LKM_CANCEL); | |
| map_flag(DLM_LKF_CONVERT, LKM_CONVERT); | |
| map_flag(DLM_LKF_VALBLK, LKM_VALBLK); | |
| map_flag(DLM_LKF_IVVALBLK, LKM_INVVALBLK); | |
| map_flag(DLM_LKF_ORPHAN, LKM_ORPHAN); | |
| map_flag(DLM_LKF_FORCEUNLOCK, LKM_FORCE); | |
| map_flag(DLM_LKF_TIMEOUT, LKM_TIMEOUT); | |
| map_flag(DLM_LKF_LOCAL, LKM_LOCAL); | |
| /* map_flag() should have cleared every flag passed in */ | |
| BUG_ON(flags != 0); | |
| return o2dlm_flags; | |
| } | |
| #undef map_flag | |
| /* | |
| * Map an o2dlm status to standard errno values. | |
| * | |
| * o2dlm only uses a handful of these, and returns even fewer to the | |
| * caller. Still, we try to assign sane values to each error. | |
| * | |
| * The following value pairs have special meanings to dlmglue, thus | |
| * the right hand side needs to stay unique - never duplicate the | |
| * mapping elsewhere in the table! | |
| * | |
| * DLM_NORMAL: 0 | |
| * DLM_NOTQUEUED: -EAGAIN | |
| * DLM_CANCELGRANT: -EBUSY | |
| * DLM_CANCEL: -DLM_ECANCEL | |
| */ | |
| /* Keep in sync with dlmapi.h */ | |
| static int status_map[] = { | |
| [DLM_NORMAL] = 0, /* Success */ | |
| [DLM_GRANTED] = -EINVAL, | |
| [DLM_DENIED] = -EACCES, | |
| [DLM_DENIED_NOLOCKS] = -EACCES, | |
| [DLM_WORKING] = -EACCES, | |
| [DLM_BLOCKED] = -EINVAL, | |
| [DLM_BLOCKED_ORPHAN] = -EINVAL, | |
| [DLM_DENIED_GRACE_PERIOD] = -EACCES, | |
| [DLM_SYSERR] = -ENOMEM, /* It is what it is */ | |
| [DLM_NOSUPPORT] = -EPROTO, | |
| [DLM_CANCELGRANT] = -EBUSY, /* Cancel after grant */ | |
| [DLM_IVLOCKID] = -EINVAL, | |
| [DLM_SYNC] = -EINVAL, | |
| [DLM_BADTYPE] = -EINVAL, | |
| [DLM_BADRESOURCE] = -EINVAL, | |
| [DLM_MAXHANDLES] = -ENOMEM, | |
| [DLM_NOCLINFO] = -EINVAL, | |
| [DLM_NOLOCKMGR] = -EINVAL, | |
| [DLM_NOPURGED] = -EINVAL, | |
| [DLM_BADARGS] = -EINVAL, | |
| [DLM_VOID] = -EINVAL, | |
| [DLM_NOTQUEUED] = -EAGAIN, /* Trylock failed */ | |
| [DLM_IVBUFLEN] = -EINVAL, | |
| [DLM_CVTUNGRANT] = -EPERM, | |
| [DLM_BADPARAM] = -EINVAL, | |
| [DLM_VALNOTVALID] = -EINVAL, | |
| [DLM_REJECTED] = -EPERM, | |
| [DLM_ABORT] = -EINVAL, | |
| [DLM_CANCEL] = -DLM_ECANCEL, /* Successful cancel */ | |
| [DLM_IVRESHANDLE] = -EINVAL, | |
| [DLM_DEADLOCK] = -EDEADLK, | |
| [DLM_DENIED_NOASTS] = -EINVAL, | |
| [DLM_FORWARD] = -EINVAL, | |
| [DLM_TIMEOUT] = -ETIMEDOUT, | |
| [DLM_IVGROUPID] = -EINVAL, | |
| [DLM_VERS_CONFLICT] = -EOPNOTSUPP, | |
| [DLM_BAD_DEVICE_PATH] = -ENOENT, | |
| [DLM_NO_DEVICE_PERMISSION] = -EPERM, | |
| [DLM_NO_CONTROL_DEVICE] = -ENOENT, | |
| [DLM_RECOVERING] = -ENOTCONN, | |
| [DLM_MIGRATING] = -ERESTART, | |
| [DLM_MAXSTATS] = -EINVAL, | |
| }; | |
| static int dlm_status_to_errno(enum dlm_status status) | |
| { | |
| BUG_ON(status < 0 || status >= ARRAY_SIZE(status_map)); | |
| return status_map[status]; | |
| } | |
| static void o2dlm_lock_ast_wrapper(void *astarg) | |
| { | |
| struct ocfs2_dlm_lksb *lksb = astarg; | |
| lksb->lksb_conn->cc_proto->lp_lock_ast(lksb); | |
| } | |
| static void o2dlm_blocking_ast_wrapper(void *astarg, int level) | |
| { | |
| struct ocfs2_dlm_lksb *lksb = astarg; | |
| lksb->lksb_conn->cc_proto->lp_blocking_ast(lksb, level); | |
| } | |
| static void o2dlm_unlock_ast_wrapper(void *astarg, enum dlm_status status) | |
| { | |
| struct ocfs2_dlm_lksb *lksb = astarg; | |
| int error = dlm_status_to_errno(status); | |
| /* | |
| * In o2dlm, you can get both the lock_ast() for the lock being | |
| * granted and the unlock_ast() for the CANCEL failing. A | |
| * successful cancel sends DLM_NORMAL here. If the | |
| * lock grant happened before the cancel arrived, you get | |
| * DLM_CANCELGRANT. | |
| * | |
| * There's no need for the double-ast. If we see DLM_CANCELGRANT, | |
| * we just ignore it. We expect the lock_ast() to handle the | |
| * granted lock. | |
| */ | |
| if (status == DLM_CANCELGRANT) | |
| return; | |
| lksb->lksb_conn->cc_proto->lp_unlock_ast(lksb, error); | |
| } | |
| static int o2cb_dlm_lock(struct ocfs2_cluster_connection *conn, | |
| int mode, | |
| struct ocfs2_dlm_lksb *lksb, | |
| u32 flags, | |
| void *name, | |
| unsigned int namelen) | |
| { | |
| enum dlm_status status; | |
| int o2dlm_mode = mode_to_o2dlm(mode); | |
| int o2dlm_flags = flags_to_o2dlm(flags); | |
| int ret; | |
| status = dlmlock(conn->cc_lockspace, o2dlm_mode, &lksb->lksb_o2dlm, | |
| o2dlm_flags, name, namelen, | |
| o2dlm_lock_ast_wrapper, lksb, | |
| o2dlm_blocking_ast_wrapper); | |
| ret = dlm_status_to_errno(status); | |
| return ret; | |
| } | |
| static int o2cb_dlm_unlock(struct ocfs2_cluster_connection *conn, | |
| struct ocfs2_dlm_lksb *lksb, | |
| u32 flags) | |
| { | |
| enum dlm_status status; | |
| int o2dlm_flags = flags_to_o2dlm(flags); | |
| int ret; | |
| status = dlmunlock(conn->cc_lockspace, &lksb->lksb_o2dlm, | |
| o2dlm_flags, o2dlm_unlock_ast_wrapper, lksb); | |
| ret = dlm_status_to_errno(status); | |
| return ret; | |
| } | |
| static int o2cb_dlm_lock_status(struct ocfs2_dlm_lksb *lksb) | |
| { | |
| return dlm_status_to_errno(lksb->lksb_o2dlm.status); | |
| } | |
| /* | |
| * o2dlm aways has a "valid" LVB. If the dlm loses track of the LVB | |
| * contents, it will zero out the LVB. Thus the caller can always trust | |
| * the contents. | |
| */ | |
| static int o2cb_dlm_lvb_valid(struct ocfs2_dlm_lksb *lksb) | |
| { | |
| return 1; | |
| } | |
| static void *o2cb_dlm_lvb(struct ocfs2_dlm_lksb *lksb) | |
| { | |
| return (void *)(lksb->lksb_o2dlm.lvb); | |
| } | |
| static void o2cb_dump_lksb(struct ocfs2_dlm_lksb *lksb) | |
| { | |
| dlm_print_one_lock(lksb->lksb_o2dlm.lockid); | |
| } | |
| /* | |
| * Check if this node is heartbeating and is connected to all other | |
| * heartbeating nodes. | |
| */ | |
| static int o2cb_cluster_check(void) | |
| { | |
| u8 node_num; | |
| int i; | |
| unsigned long hbmap[BITS_TO_LONGS(O2NM_MAX_NODES)]; | |
| unsigned long netmap[BITS_TO_LONGS(O2NM_MAX_NODES)]; | |
| node_num = o2nm_this_node(); | |
| if (node_num == O2NM_MAX_NODES) { | |
| printk(KERN_ERR "o2cb: This node has not been configured.\n"); | |
| return -EINVAL; | |
| } | |
| /* | |
| * o2dlm expects o2net sockets to be created. If not, then | |
| * dlm_join_domain() fails with a stack of errors which are both cryptic | |
| * and incomplete. The idea here is to detect upfront whether we have | |
| * managed to connect to all nodes or not. If not, then list the nodes | |
| * to allow the user to check the configuration (incorrect IP, firewall, | |
| * etc.) Yes, this is racy. But its not the end of the world. | |
| */ | |
| #define O2CB_MAP_STABILIZE_COUNT 60 | |
| for (i = 0; i < O2CB_MAP_STABILIZE_COUNT; ++i) { | |
| o2hb_fill_node_map(hbmap, sizeof(hbmap)); | |
| if (!test_bit(node_num, hbmap)) { | |
| printk(KERN_ERR "o2cb: %s heartbeat has not been " | |
| "started.\n", (o2hb_global_heartbeat_active() ? | |
| "Global" : "Local")); | |
| return -EINVAL; | |
| } | |
| o2net_fill_node_map(netmap, sizeof(netmap)); | |
| /* Force set the current node to allow easy compare */ | |
| set_bit(node_num, netmap); | |
| if (!memcmp(hbmap, netmap, sizeof(hbmap))) | |
| return 0; | |
| if (i < O2CB_MAP_STABILIZE_COUNT - 1) | |
| msleep(1000); | |
| } | |
| printk(KERN_ERR "o2cb: This node could not connect to nodes:"); | |
| i = -1; | |
| while ((i = find_next_bit(hbmap, O2NM_MAX_NODES, | |
| i + 1)) < O2NM_MAX_NODES) { | |
| if (!test_bit(i, netmap)) | |
| printk(" %u", i); | |
| } | |
| printk(".\n"); | |
| return -ENOTCONN; | |
| } | |
| /* | |
| * Called from the dlm when it's about to evict a node. This is how the | |
| * classic stack signals node death. | |
| */ | |
| static void o2dlm_eviction_cb(int node_num, void *data) | |
| { | |
| struct ocfs2_cluster_connection *conn = data; | |
| printk(KERN_NOTICE "o2cb: o2dlm has evicted node %d from domain %.*s\n", | |
| node_num, conn->cc_namelen, conn->cc_name); | |
| conn->cc_recovery_handler(node_num, conn->cc_recovery_data); | |
| } | |
| static int o2cb_cluster_connect(struct ocfs2_cluster_connection *conn) | |
| { | |
| int rc = 0; | |
| u32 dlm_key; | |
| struct dlm_ctxt *dlm; | |
| struct o2dlm_private *priv; | |
| struct dlm_protocol_version fs_version; | |
| BUG_ON(conn == NULL); | |
| BUG_ON(conn->cc_proto == NULL); | |
| /* Ensure cluster stack is up and all nodes are connected */ | |
| rc = o2cb_cluster_check(); | |
| if (rc) { | |
| printk(KERN_ERR "o2cb: Cluster check failed. Fix errors " | |
| "before retrying.\n"); | |
| goto out; | |
| } | |
| priv = kzalloc(sizeof(struct o2dlm_private), GFP_KERNEL); | |
| if (!priv) { | |
| rc = -ENOMEM; | |
| goto out_free; | |
| } | |
| /* This just fills the structure in. It is safe to pass conn. */ | |
| dlm_setup_eviction_cb(&priv->op_eviction_cb, o2dlm_eviction_cb, | |
| conn); | |
| conn->cc_private = priv; | |
| /* used by the dlm code to make message headers unique, each | |
| * node in this domain must agree on this. */ | |
| dlm_key = crc32_le(0, conn->cc_name, conn->cc_namelen); | |
| fs_version.pv_major = conn->cc_version.pv_major; | |
| fs_version.pv_minor = conn->cc_version.pv_minor; | |
| dlm = dlm_register_domain(conn->cc_name, dlm_key, &fs_version); | |
| if (IS_ERR(dlm)) { | |
| rc = PTR_ERR(dlm); | |
| mlog_errno(rc); | |
| goto out_free; | |
| } | |
| conn->cc_version.pv_major = fs_version.pv_major; | |
| conn->cc_version.pv_minor = fs_version.pv_minor; | |
| conn->cc_lockspace = dlm; | |
| dlm_register_eviction_cb(dlm, &priv->op_eviction_cb); | |
| out_free: | |
| if (rc) | |
| kfree(conn->cc_private); | |
| out: | |
| return rc; | |
| } | |
| static int o2cb_cluster_disconnect(struct ocfs2_cluster_connection *conn) | |
| { | |
| struct dlm_ctxt *dlm = conn->cc_lockspace; | |
| struct o2dlm_private *priv = conn->cc_private; | |
| dlm_unregister_eviction_cb(&priv->op_eviction_cb); | |
| conn->cc_private = NULL; | |
| kfree(priv); | |
| dlm_unregister_domain(dlm); | |
| conn->cc_lockspace = NULL; | |
| return 0; | |
| } | |
| static int o2cb_cluster_this_node(struct ocfs2_cluster_connection *conn, | |
| unsigned int *node) | |
| { | |
| int node_num; | |
| node_num = o2nm_this_node(); | |
| if (node_num == O2NM_INVALID_NODE_NUM) | |
| return -ENOENT; | |
| if (node_num >= O2NM_MAX_NODES) | |
| return -EOVERFLOW; | |
| *node = node_num; | |
| return 0; | |
| } | |
| static struct ocfs2_stack_operations o2cb_stack_ops = { | |
| .connect = o2cb_cluster_connect, | |
| .disconnect = o2cb_cluster_disconnect, | |
| .this_node = o2cb_cluster_this_node, | |
| .dlm_lock = o2cb_dlm_lock, | |
| .dlm_unlock = o2cb_dlm_unlock, | |
| .lock_status = o2cb_dlm_lock_status, | |
| .lvb_valid = o2cb_dlm_lvb_valid, | |
| .lock_lvb = o2cb_dlm_lvb, | |
| .dump_lksb = o2cb_dump_lksb, | |
| }; | |
| static struct ocfs2_stack_plugin o2cb_stack = { | |
| .sp_name = "o2cb", | |
| .sp_ops = &o2cb_stack_ops, | |
| .sp_owner = THIS_MODULE, | |
| }; | |
| static int __init o2cb_stack_init(void) | |
| { | |
| return ocfs2_stack_glue_register(&o2cb_stack); | |
| } | |
| static void __exit o2cb_stack_exit(void) | |
| { | |
| ocfs2_stack_glue_unregister(&o2cb_stack); | |
| } | |
| MODULE_AUTHOR("Oracle"); | |
| MODULE_DESCRIPTION("ocfs2 driver for the classic o2cb stack"); | |
| MODULE_LICENSE("GPL"); | |
| module_init(o2cb_stack_init); | |
| module_exit(o2cb_stack_exit); |