| // SPDX-License-Identifier: GPL-2.0 | |
| #include <linux/debug_locks.h> | |
| #include <linux/delay.h> | |
| #include <linux/jiffies.h> | |
| #include <linux/kernel.h> | |
| #include <linux/lockdep.h> | |
| #include <linux/preempt.h> | |
| #include <linux/printk.h> | |
| #include <linux/sched.h> | |
| #include <linux/spinlock.h> | |
| #include <linux/stacktrace.h> | |
| #include "kcsan.h" | |
| #include "encoding.h" | |
| /* | |
| * Max. number of stack entries to show in the report. | |
| */ | |
| #define NUM_STACK_ENTRIES 64 | |
| /* Common access info. */ | |
| struct access_info { | |
| const volatile void *ptr; | |
| size_t size; | |
| int access_type; | |
| int task_pid; | |
| int cpu_id; | |
| }; | |
| /* | |
| * Other thread info: communicated from other racing thread to thread that set | |
| * up the watchpoint, which then prints the complete report atomically. | |
| */ | |
| struct other_info { | |
| struct access_info ai; | |
| unsigned long stack_entries[NUM_STACK_ENTRIES]; | |
| int num_stack_entries; | |
| /* | |
| * Optionally pass @current. Typically we do not need to pass @current | |
| * via @other_info since just @task_pid is sufficient. Passing @current | |
| * has additional overhead. | |
| * | |
| * To safely pass @current, we must either use get_task_struct/ | |
| * put_task_struct, or stall the thread that populated @other_info. | |
| * | |
| * We cannot rely on get_task_struct/put_task_struct in case | |
| * release_report() races with a task being released, and would have to | |
| * free it in release_report(). This may result in deadlock if we want | |
| * to use KCSAN on the allocators. | |
| * | |
| * Since we also want to reliably print held locks for | |
| * CONFIG_KCSAN_VERBOSE, the current implementation stalls the thread | |
| * that populated @other_info until it has been consumed. | |
| */ | |
| struct task_struct *task; | |
| }; | |
| /* | |
| * To never block any producers of struct other_info, we need as many elements | |
| * as we have watchpoints (upper bound on concurrent races to report). | |
| */ | |
| static struct other_info other_infos[CONFIG_KCSAN_NUM_WATCHPOINTS + NUM_SLOTS-1]; | |
| /* | |
| * Information about reported races; used to rate limit reporting. | |
| */ | |
| struct report_time { | |
| /* | |
| * The last time the race was reported. | |
| */ | |
| unsigned long time; | |
| /* | |
| * The frames of the 2 threads; if only 1 thread is known, one frame | |
| * will be 0. | |
| */ | |
| unsigned long frame1; | |
| unsigned long frame2; | |
| }; | |
| /* | |
| * Since we also want to be able to debug allocators with KCSAN, to avoid | |
| * deadlock, report_times cannot be dynamically resized with krealloc in | |
| * rate_limit_report. | |
| * | |
| * Therefore, we use a fixed-size array, which at most will occupy a page. This | |
| * still adequately rate limits reports, assuming that a) number of unique data | |
| * races is not excessive, and b) occurrence of unique races within the | |
| * same time window is limited. | |
| */ | |
| #define REPORT_TIMES_MAX (PAGE_SIZE / sizeof(struct report_time)) | |
| #define REPORT_TIMES_SIZE \ | |
| (CONFIG_KCSAN_REPORT_ONCE_IN_MS > REPORT_TIMES_MAX ? \ | |
| REPORT_TIMES_MAX : \ | |
| CONFIG_KCSAN_REPORT_ONCE_IN_MS) | |
| static struct report_time report_times[REPORT_TIMES_SIZE]; | |
| /* | |
| * Spinlock serializing report generation, and access to @other_infos. Although | |
| * it could make sense to have a finer-grained locking story for @other_infos, | |
| * report generation needs to be serialized either way, so not much is gained. | |
| */ | |
| static DEFINE_RAW_SPINLOCK(report_lock); | |
| /* | |
| * Checks if the race identified by thread frames frame1 and frame2 has | |
| * been reported since (now - KCSAN_REPORT_ONCE_IN_MS). | |
| */ | |
| static bool rate_limit_report(unsigned long frame1, unsigned long frame2) | |
| { | |
| struct report_time *use_entry = &report_times[0]; | |
| unsigned long invalid_before; | |
| int i; | |
| BUILD_BUG_ON(CONFIG_KCSAN_REPORT_ONCE_IN_MS != 0 && REPORT_TIMES_SIZE == 0); | |
| if (CONFIG_KCSAN_REPORT_ONCE_IN_MS == 0) | |
| return false; | |
| invalid_before = jiffies - msecs_to_jiffies(CONFIG_KCSAN_REPORT_ONCE_IN_MS); | |
| /* Check if a matching race report exists. */ | |
| for (i = 0; i < REPORT_TIMES_SIZE; ++i) { | |
| struct report_time *rt = &report_times[i]; | |
| /* | |
| * Must always select an entry for use to store info as we | |
| * cannot resize report_times; at the end of the scan, use_entry | |
| * will be the oldest entry, which ideally also happened before | |
| * KCSAN_REPORT_ONCE_IN_MS ago. | |
| */ | |
| if (time_before(rt->time, use_entry->time)) | |
| use_entry = rt; | |
| /* | |
| * Initially, no need to check any further as this entry as well | |
| * as following entries have never been used. | |
| */ | |
| if (rt->time == 0) | |
| break; | |
| /* Check if entry expired. */ | |
| if (time_before(rt->time, invalid_before)) | |
| continue; /* before KCSAN_REPORT_ONCE_IN_MS ago */ | |
| /* Reported recently, check if race matches. */ | |
| if ((rt->frame1 == frame1 && rt->frame2 == frame2) || | |
| (rt->frame1 == frame2 && rt->frame2 == frame1)) | |
| return true; | |
| } | |
| use_entry->time = jiffies; | |
| use_entry->frame1 = frame1; | |
| use_entry->frame2 = frame2; | |
| return false; | |
| } | |
| /* | |
| * Special rules to skip reporting. | |
| */ | |
| static bool | |
| skip_report(enum kcsan_value_change value_change, unsigned long top_frame) | |
| { | |
| /* Should never get here if value_change==FALSE. */ | |
| WARN_ON_ONCE(value_change == KCSAN_VALUE_CHANGE_FALSE); | |
| /* | |
| * The first call to skip_report always has value_change==TRUE, since we | |
| * cannot know the value written of an instrumented access. For the 2nd | |
| * call there are 6 cases with CONFIG_KCSAN_REPORT_VALUE_CHANGE_ONLY: | |
| * | |
| * 1. read watchpoint, conflicting write (value_change==TRUE): report; | |
| * 2. read watchpoint, conflicting write (value_change==MAYBE): skip; | |
| * 3. write watchpoint, conflicting write (value_change==TRUE): report; | |
| * 4. write watchpoint, conflicting write (value_change==MAYBE): skip; | |
| * 5. write watchpoint, conflicting read (value_change==MAYBE): skip; | |
| * 6. write watchpoint, conflicting read (value_change==TRUE): report; | |
| * | |
| * Cases 1-4 are intuitive and expected; case 5 ensures we do not report | |
| * data races where the write may have rewritten the same value; case 6 | |
| * is possible either if the size is larger than what we check value | |
| * changes for or the access type is KCSAN_ACCESS_ASSERT. | |
| */ | |
| if (IS_ENABLED(CONFIG_KCSAN_REPORT_VALUE_CHANGE_ONLY) && | |
| value_change == KCSAN_VALUE_CHANGE_MAYBE) { | |
| /* | |
| * The access is a write, but the data value did not change. | |
| * | |
| * We opt-out of this filter for certain functions at request of | |
| * maintainers. | |
| */ | |
| char buf[64]; | |
| int len = scnprintf(buf, sizeof(buf), "%ps", (void *)top_frame); | |
| if (!strnstr(buf, "rcu_", len) && | |
| !strnstr(buf, "_rcu", len) && | |
| !strnstr(buf, "_srcu", len)) | |
| return true; | |
| } | |
| return kcsan_skip_report_debugfs(top_frame); | |
| } | |
| static const char *get_access_type(int type) | |
| { | |
| if (type & KCSAN_ACCESS_ASSERT) { | |
| if (type & KCSAN_ACCESS_SCOPED) { | |
| if (type & KCSAN_ACCESS_WRITE) | |
| return "assert no accesses (scoped)"; | |
| else | |
| return "assert no writes (scoped)"; | |
| } else { | |
| if (type & KCSAN_ACCESS_WRITE) | |
| return "assert no accesses"; | |
| else | |
| return "assert no writes"; | |
| } | |
| } | |
| switch (type) { | |
| case 0: | |
| return "read"; | |
| case KCSAN_ACCESS_ATOMIC: | |
| return "read (marked)"; | |
| case KCSAN_ACCESS_WRITE: | |
| return "write"; | |
| case KCSAN_ACCESS_WRITE | KCSAN_ACCESS_ATOMIC: | |
| return "write (marked)"; | |
| case KCSAN_ACCESS_COMPOUND | KCSAN_ACCESS_WRITE: | |
| return "read-write"; | |
| case KCSAN_ACCESS_COMPOUND | KCSAN_ACCESS_WRITE | KCSAN_ACCESS_ATOMIC: | |
| return "read-write (marked)"; | |
| case KCSAN_ACCESS_SCOPED: | |
| return "read (scoped)"; | |
| case KCSAN_ACCESS_SCOPED | KCSAN_ACCESS_ATOMIC: | |
| return "read (marked, scoped)"; | |
| case KCSAN_ACCESS_SCOPED | KCSAN_ACCESS_WRITE: | |
| return "write (scoped)"; | |
| case KCSAN_ACCESS_SCOPED | KCSAN_ACCESS_WRITE | KCSAN_ACCESS_ATOMIC: | |
| return "write (marked, scoped)"; | |
| default: | |
| BUG(); | |
| } | |
| } | |
| static const char *get_bug_type(int type) | |
| { | |
| return (type & KCSAN_ACCESS_ASSERT) != 0 ? "assert: race" : "data-race"; | |
| } | |
| /* Return thread description: in task or interrupt. */ | |
| static const char *get_thread_desc(int task_id) | |
| { | |
| if (task_id != -1) { | |
| static char buf[32]; /* safe: protected by report_lock */ | |
| snprintf(buf, sizeof(buf), "task %i", task_id); | |
| return buf; | |
| } | |
| return "interrupt"; | |
| } | |
| /* Helper to skip KCSAN-related functions in stack-trace. */ | |
| static int get_stack_skipnr(const unsigned long stack_entries[], int num_entries) | |
| { | |
| char buf[64]; | |
| char *cur; | |
| int len, skip; | |
| for (skip = 0; skip < num_entries; ++skip) { | |
| len = scnprintf(buf, sizeof(buf), "%ps", (void *)stack_entries[skip]); | |
| /* Never show tsan_* or {read,write}_once_size. */ | |
| if (strnstr(buf, "tsan_", len) || | |
| strnstr(buf, "_once_size", len)) | |
| continue; | |
| cur = strnstr(buf, "kcsan_", len); | |
| if (cur) { | |
| cur += strlen("kcsan_"); | |
| if (!str_has_prefix(cur, "test")) | |
| continue; /* KCSAN runtime function. */ | |
| /* KCSAN related test. */ | |
| } | |
| /* | |
| * No match for runtime functions -- @skip entries to skip to | |
| * get to first frame of interest. | |
| */ | |
| break; | |
| } | |
| return skip; | |
| } | |
| /* Compares symbolized strings of addr1 and addr2. */ | |
| static int sym_strcmp(void *addr1, void *addr2) | |
| { | |
| char buf1[64]; | |
| char buf2[64]; | |
| snprintf(buf1, sizeof(buf1), "%pS", addr1); | |
| snprintf(buf2, sizeof(buf2), "%pS", addr2); | |
| return strncmp(buf1, buf2, sizeof(buf1)); | |
| } | |
| static void print_verbose_info(struct task_struct *task) | |
| { | |
| if (!task) | |
| return; | |
| /* Restore IRQ state trace for printing. */ | |
| kcsan_restore_irqtrace(task); | |
| pr_err("\n"); | |
| debug_show_held_locks(task); | |
| print_irqtrace_events(task); | |
| } | |
| /* | |
| * Returns true if a report was generated, false otherwise. | |
| */ | |
| static bool print_report(enum kcsan_value_change value_change, | |
| enum kcsan_report_type type, | |
| const struct access_info *ai, | |
| const struct other_info *other_info) | |
| { | |
| unsigned long stack_entries[NUM_STACK_ENTRIES] = { 0 }; | |
| int num_stack_entries = stack_trace_save(stack_entries, NUM_STACK_ENTRIES, 1); | |
| int skipnr = get_stack_skipnr(stack_entries, num_stack_entries); | |
| unsigned long this_frame = stack_entries[skipnr]; | |
| unsigned long other_frame = 0; | |
| int other_skipnr = 0; /* silence uninit warnings */ | |
| /* | |
| * Must check report filter rules before starting to print. | |
| */ | |
| if (skip_report(KCSAN_VALUE_CHANGE_TRUE, stack_entries[skipnr])) | |
| return false; | |
| if (type == KCSAN_REPORT_RACE_SIGNAL) { | |
| other_skipnr = get_stack_skipnr(other_info->stack_entries, | |
| other_info->num_stack_entries); | |
| other_frame = other_info->stack_entries[other_skipnr]; | |
| /* @value_change is only known for the other thread */ | |
| if (skip_report(value_change, other_frame)) | |
| return false; | |
| } | |
| if (rate_limit_report(this_frame, other_frame)) | |
| return false; | |
| /* Print report header. */ | |
| pr_err("==================================================================\n"); | |
| switch (type) { | |
| case KCSAN_REPORT_RACE_SIGNAL: { | |
| int cmp; | |
| /* | |
| * Order functions lexographically for consistent bug titles. | |
| * Do not print offset of functions to keep title short. | |
| */ | |
| cmp = sym_strcmp((void *)other_frame, (void *)this_frame); | |
| pr_err("BUG: KCSAN: %s in %ps / %ps\n", | |
| get_bug_type(ai->access_type | other_info->ai.access_type), | |
| (void *)(cmp < 0 ? other_frame : this_frame), | |
| (void *)(cmp < 0 ? this_frame : other_frame)); | |
| } break; | |
| case KCSAN_REPORT_RACE_UNKNOWN_ORIGIN: | |
| pr_err("BUG: KCSAN: %s in %pS\n", get_bug_type(ai->access_type), | |
| (void *)this_frame); | |
| break; | |
| default: | |
| BUG(); | |
| } | |
| pr_err("\n"); | |
| /* Print information about the racing accesses. */ | |
| switch (type) { | |
| case KCSAN_REPORT_RACE_SIGNAL: | |
| pr_err("%s to 0x%px of %zu bytes by %s on cpu %i:\n", | |
| get_access_type(other_info->ai.access_type), other_info->ai.ptr, | |
| other_info->ai.size, get_thread_desc(other_info->ai.task_pid), | |
| other_info->ai.cpu_id); | |
| /* Print the other thread's stack trace. */ | |
| stack_trace_print(other_info->stack_entries + other_skipnr, | |
| other_info->num_stack_entries - other_skipnr, | |
| 0); | |
| if (IS_ENABLED(CONFIG_KCSAN_VERBOSE)) | |
| print_verbose_info(other_info->task); | |
| pr_err("\n"); | |
| pr_err("%s to 0x%px of %zu bytes by %s on cpu %i:\n", | |
| get_access_type(ai->access_type), ai->ptr, ai->size, | |
| get_thread_desc(ai->task_pid), ai->cpu_id); | |
| break; | |
| case KCSAN_REPORT_RACE_UNKNOWN_ORIGIN: | |
| pr_err("race at unknown origin, with %s to 0x%px of %zu bytes by %s on cpu %i:\n", | |
| get_access_type(ai->access_type), ai->ptr, ai->size, | |
| get_thread_desc(ai->task_pid), ai->cpu_id); | |
| break; | |
| default: | |
| BUG(); | |
| } | |
| /* Print stack trace of this thread. */ | |
| stack_trace_print(stack_entries + skipnr, num_stack_entries - skipnr, | |
| 0); | |
| if (IS_ENABLED(CONFIG_KCSAN_VERBOSE)) | |
| print_verbose_info(current); | |
| /* Print report footer. */ | |
| pr_err("\n"); | |
| pr_err("Reported by Kernel Concurrency Sanitizer on:\n"); | |
| dump_stack_print_info(KERN_DEFAULT); | |
| pr_err("==================================================================\n"); | |
| return true; | |
| } | |
| static void release_report(unsigned long *flags, struct other_info *other_info) | |
| { | |
| if (other_info) | |
| /* | |
| * Use size to denote valid/invalid, since KCSAN entirely | |
| * ignores 0-sized accesses. | |
| */ | |
| other_info->ai.size = 0; | |
| raw_spin_unlock_irqrestore(&report_lock, *flags); | |
| } | |
| /* | |
| * Sets @other_info->task and awaits consumption of @other_info. | |
| * | |
| * Precondition: report_lock is held. | |
| * Postcondition: report_lock is held. | |
| */ | |
| static void set_other_info_task_blocking(unsigned long *flags, | |
| const struct access_info *ai, | |
| struct other_info *other_info) | |
| { | |
| /* | |
| * We may be instrumenting a code-path where current->state is already | |
| * something other than TASK_RUNNING. | |
| */ | |
| const bool is_running = current->state == TASK_RUNNING; | |
| /* | |
| * To avoid deadlock in case we are in an interrupt here and this is a | |
| * race with a task on the same CPU (KCSAN_INTERRUPT_WATCHER), provide a | |
| * timeout to ensure this works in all contexts. | |
| * | |
| * Await approximately the worst case delay of the reporting thread (if | |
| * we are not interrupted). | |
| */ | |
| int timeout = max(kcsan_udelay_task, kcsan_udelay_interrupt); | |
| other_info->task = current; | |
| do { | |
| if (is_running) { | |
| /* | |
| * Let lockdep know the real task is sleeping, to print | |
| * the held locks (recall we turned lockdep off, so | |
| * locking/unlocking @report_lock won't be recorded). | |
| */ | |
| set_current_state(TASK_UNINTERRUPTIBLE); | |
| } | |
| raw_spin_unlock_irqrestore(&report_lock, *flags); | |
| /* | |
| * We cannot call schedule() since we also cannot reliably | |
| * determine if sleeping here is permitted -- see in_atomic(). | |
| */ | |
| udelay(1); | |
| raw_spin_lock_irqsave(&report_lock, *flags); | |
| if (timeout-- < 0) { | |
| /* | |
| * Abort. Reset @other_info->task to NULL, since it | |
| * appears the other thread is still going to consume | |
| * it. It will result in no verbose info printed for | |
| * this task. | |
| */ | |
| other_info->task = NULL; | |
| break; | |
| } | |
| /* | |
| * If invalid, or @ptr nor @current matches, then @other_info | |
| * has been consumed and we may continue. If not, retry. | |
| */ | |
| } while (other_info->ai.size && other_info->ai.ptr == ai->ptr && | |
| other_info->task == current); | |
| if (is_running) | |
| set_current_state(TASK_RUNNING); | |
| } | |
| /* Populate @other_info; requires that the provided @other_info not in use. */ | |
| static void prepare_report_producer(unsigned long *flags, | |
| const struct access_info *ai, | |
| struct other_info *other_info) | |
| { | |
| raw_spin_lock_irqsave(&report_lock, *flags); | |
| /* | |
| * The same @other_infos entry cannot be used concurrently, because | |
| * there is a one-to-one mapping to watchpoint slots (@watchpoints in | |
| * core.c), and a watchpoint is only released for reuse after reporting | |
| * is done by the consumer of @other_info. Therefore, it is impossible | |
| * for another concurrent prepare_report_producer() to set the same | |
| * @other_info, and are guaranteed exclusivity for the @other_infos | |
| * entry pointed to by @other_info. | |
| * | |
| * To check this property holds, size should never be non-zero here, | |
| * because every consumer of struct other_info resets size to 0 in | |
| * release_report(). | |
| */ | |
| WARN_ON(other_info->ai.size); | |
| other_info->ai = *ai; | |
| other_info->num_stack_entries = stack_trace_save(other_info->stack_entries, NUM_STACK_ENTRIES, 2); | |
| if (IS_ENABLED(CONFIG_KCSAN_VERBOSE)) | |
| set_other_info_task_blocking(flags, ai, other_info); | |
| raw_spin_unlock_irqrestore(&report_lock, *flags); | |
| } | |
| /* Awaits producer to fill @other_info and then returns. */ | |
| static bool prepare_report_consumer(unsigned long *flags, | |
| const struct access_info *ai, | |
| struct other_info *other_info) | |
| { | |
| raw_spin_lock_irqsave(&report_lock, *flags); | |
| while (!other_info->ai.size) { /* Await valid @other_info. */ | |
| raw_spin_unlock_irqrestore(&report_lock, *flags); | |
| cpu_relax(); | |
| raw_spin_lock_irqsave(&report_lock, *flags); | |
| } | |
| /* Should always have a matching access based on watchpoint encoding. */ | |
| if (WARN_ON(!matching_access((unsigned long)other_info->ai.ptr & WATCHPOINT_ADDR_MASK, other_info->ai.size, | |
| (unsigned long)ai->ptr & WATCHPOINT_ADDR_MASK, ai->size))) | |
| goto discard; | |
| if (!matching_access((unsigned long)other_info->ai.ptr, other_info->ai.size, | |
| (unsigned long)ai->ptr, ai->size)) { | |
| /* | |
| * If the actual accesses to not match, this was a false | |
| * positive due to watchpoint encoding. | |
| */ | |
| atomic_long_inc(&kcsan_counters[KCSAN_COUNTER_ENCODING_FALSE_POSITIVES]); | |
| goto discard; | |
| } | |
| return true; | |
| discard: | |
| release_report(flags, other_info); | |
| return false; | |
| } | |
| /* | |
| * Depending on the report type either sets @other_info and returns false, or | |
| * awaits @other_info and returns true. If @other_info is not required for the | |
| * report type, simply acquires @report_lock and returns true. | |
| */ | |
| static noinline bool prepare_report(unsigned long *flags, | |
| enum kcsan_report_type type, | |
| const struct access_info *ai, | |
| struct other_info *other_info) | |
| { | |
| switch (type) { | |
| case KCSAN_REPORT_CONSUMED_WATCHPOINT: | |
| prepare_report_producer(flags, ai, other_info); | |
| return false; | |
| case KCSAN_REPORT_RACE_SIGNAL: | |
| return prepare_report_consumer(flags, ai, other_info); | |
| default: | |
| /* @other_info not required; just acquire @report_lock. */ | |
| raw_spin_lock_irqsave(&report_lock, *flags); | |
| return true; | |
| } | |
| } | |
| void kcsan_report(const volatile void *ptr, size_t size, int access_type, | |
| enum kcsan_value_change value_change, | |
| enum kcsan_report_type type, int watchpoint_idx) | |
| { | |
| unsigned long flags = 0; | |
| const struct access_info ai = { | |
| .ptr = ptr, | |
| .size = size, | |
| .access_type = access_type, | |
| .task_pid = in_task() ? task_pid_nr(current) : -1, | |
| .cpu_id = raw_smp_processor_id() | |
| }; | |
| struct other_info *other_info = type == KCSAN_REPORT_RACE_UNKNOWN_ORIGIN | |
| ? NULL : &other_infos[watchpoint_idx]; | |
| kcsan_disable_current(); | |
| if (WARN_ON(watchpoint_idx < 0 || watchpoint_idx >= ARRAY_SIZE(other_infos))) | |
| goto out; | |
| /* | |
| * Because we may generate reports when we're in scheduler code, the use | |
| * of printk() could deadlock. Until such time that all printing code | |
| * called in print_report() is scheduler-safe, accept the risk, and just | |
| * get our message out. As such, also disable lockdep to hide the | |
| * warning, and avoid disabling lockdep for the rest of the kernel. | |
| */ | |
| lockdep_off(); | |
| if (prepare_report(&flags, type, &ai, other_info)) { | |
| /* | |
| * Never report if value_change is FALSE, only if we it is | |
| * either TRUE or MAYBE. In case of MAYBE, further filtering may | |
| * be done once we know the full stack trace in print_report(). | |
| */ | |
| bool reported = value_change != KCSAN_VALUE_CHANGE_FALSE && | |
| print_report(value_change, type, &ai, other_info); | |
| if (reported && panic_on_warn) | |
| panic("panic_on_warn set ...\n"); | |
| release_report(&flags, other_info); | |
| } | |
| lockdep_on(); | |
| out: | |
| kcsan_enable_current(); | |
| } |