| #!/bin/bash | |
| # SPDX-License-Identifier: GPL-2.0 | |
| # This test is for checking drop monitor functionality. | |
| ret=0 | |
| # Kselftest framework requirement - SKIP code is 4. | |
| ksft_skip=4 | |
| # all tests in this script. Can be overridden with -t option | |
| TESTS=" | |
| sw_drops | |
| hw_drops | |
| " | |
| IP="ip -netns ns1" | |
| TC="tc -netns ns1" | |
| DEVLINK="devlink -N ns1" | |
| NS_EXEC="ip netns exec ns1" | |
| NETDEVSIM_PATH=/sys/bus/netdevsim/ | |
| DEV_ADDR=1337 | |
| DEV=netdevsim${DEV_ADDR} | |
| DEVLINK_DEV=netdevsim/${DEV} | |
| log_test() | |
| { | |
| local rc=$1 | |
| local expected=$2 | |
| local msg="$3" | |
| if [ ${rc} -eq ${expected} ]; then | |
| printf " TEST: %-60s [ OK ]\n" "${msg}" | |
| nsuccess=$((nsuccess+1)) | |
| else | |
| ret=1 | |
| nfail=$((nfail+1)) | |
| printf " TEST: %-60s [FAIL]\n" "${msg}" | |
| fi | |
| } | |
| setup() | |
| { | |
| modprobe netdevsim &> /dev/null | |
| set -e | |
| ip netns add ns1 | |
| $IP link add dummy10 up type dummy | |
| $NS_EXEC echo "$DEV_ADDR 1" > ${NETDEVSIM_PATH}/new_device | |
| udevadm settle | |
| local netdev=$($NS_EXEC ls ${NETDEVSIM_PATH}/devices/${DEV}/net/) | |
| $IP link set dev $netdev up | |
| set +e | |
| } | |
| cleanup() | |
| { | |
| $NS_EXEC echo "$DEV_ADDR" > ${NETDEVSIM_PATH}/del_device | |
| ip netns del ns1 | |
| } | |
| sw_drops_test() | |
| { | |
| echo | |
| echo "Software drops test" | |
| setup | |
| local dir=$(mktemp -d) | |
| $TC qdisc add dev dummy10 clsact | |
| $TC filter add dev dummy10 egress pref 1 handle 101 proto ip \ | |
| flower dst_ip 192.0.2.10 action drop | |
| $NS_EXEC mausezahn dummy10 -a 00:11:22:33:44:55 -b 00:aa:bb:cc:dd:ee \ | |
| -A 192.0.2.1 -B 192.0.2.10 -t udp sp=12345,dp=54321 -c 0 -q \ | |
| -d 100msec & | |
| timeout 5 dwdump -o sw -w ${dir}/packets.pcap | |
| (( $(tshark -r ${dir}/packets.pcap \ | |
| -Y 'ip.dst == 192.0.2.10' 2> /dev/null | wc -l) != 0)) | |
| log_test $? 0 "Capturing active software drops" | |
| rm ${dir}/packets.pcap | |
| { kill %% && wait %%; } 2>/dev/null | |
| timeout 5 dwdump -o sw -w ${dir}/packets.pcap | |
| (( $(tshark -r ${dir}/packets.pcap \ | |
| -Y 'ip.dst == 192.0.2.10' 2> /dev/null | wc -l) == 0)) | |
| log_test $? 0 "Capturing inactive software drops" | |
| rm -r $dir | |
| cleanup | |
| } | |
| hw_drops_test() | |
| { | |
| echo | |
| echo "Hardware drops test" | |
| setup | |
| local dir=$(mktemp -d) | |
| $DEVLINK trap set $DEVLINK_DEV trap blackhole_route action trap | |
| timeout 5 dwdump -o hw -w ${dir}/packets.pcap | |
| (( $(tshark -r ${dir}/packets.pcap \ | |
| -Y 'net_dm.hw_trap_name== blackhole_route' 2> /dev/null \ | |
| | wc -l) != 0)) | |
| log_test $? 0 "Capturing active hardware drops" | |
| rm ${dir}/packets.pcap | |
| $DEVLINK trap set $DEVLINK_DEV trap blackhole_route action drop | |
| timeout 5 dwdump -o hw -w ${dir}/packets.pcap | |
| (( $(tshark -r ${dir}/packets.pcap \ | |
| -Y 'net_dm.hw_trap_name== blackhole_route' 2> /dev/null \ | |
| | wc -l) == 0)) | |
| log_test $? 0 "Capturing inactive hardware drops" | |
| rm -r $dir | |
| cleanup | |
| } | |
| ################################################################################ | |
| # usage | |
| usage() | |
| { | |
| cat <<EOF | |
| usage: ${0##*/} OPTS | |
| -t <test> Test(s) to run (default: all) | |
| (options: $TESTS) | |
| EOF | |
| } | |
| ################################################################################ | |
| # main | |
| while getopts ":t:h" opt; do | |
| case $opt in | |
| t) TESTS=$OPTARG;; | |
| h) usage; exit 0;; | |
| *) usage; exit 1;; | |
| esac | |
| done | |
| if [ "$(id -u)" -ne 0 ];then | |
| echo "SKIP: Need root privileges" | |
| exit $ksft_skip; | |
| fi | |
| if [ ! -x "$(command -v ip)" ]; then | |
| echo "SKIP: Could not run test without ip tool" | |
| exit $ksft_skip | |
| fi | |
| if [ ! -x "$(command -v devlink)" ]; then | |
| echo "SKIP: Could not run test without devlink tool" | |
| exit $ksft_skip | |
| fi | |
| if [ ! -x "$(command -v tshark)" ]; then | |
| echo "SKIP: Could not run test without tshark tool" | |
| exit $ksft_skip | |
| fi | |
| if [ ! -x "$(command -v dwdump)" ]; then | |
| echo "SKIP: Could not run test without dwdump tool" | |
| exit $ksft_skip | |
| fi | |
| if [ ! -x "$(command -v udevadm)" ]; then | |
| echo "SKIP: Could not run test without udevadm tool" | |
| exit $ksft_skip | |
| fi | |
| if [ ! -x "$(command -v timeout)" ]; then | |
| echo "SKIP: Could not run test without timeout tool" | |
| exit $ksft_skip | |
| fi | |
| if [ ! -x "$(command -v mausezahn)" ]; then | |
| echo "SKIP: Could not run test without mausezahn tool" | |
| exit $ksft_skip | |
| fi | |
| tshark -G fields 2> /dev/null | grep -q net_dm | |
| if [ $? -ne 0 ]; then | |
| echo "SKIP: tshark too old, missing net_dm dissector" | |
| exit $ksft_skip | |
| fi | |
| # start clean | |
| cleanup &> /dev/null | |
| for t in $TESTS | |
| do | |
| case $t in | |
| sw_drops|sw) sw_drops_test;; | |
| hw_drops|hw) hw_drops_test;; | |
| help) echo "Test names: $TESTS"; exit 0;; | |
| esac | |
| done | |
| if [ "$TESTS" != "none" ]; then | |
| printf "\nTests passed: %3d\n" ${nsuccess} | |
| printf "Tests failed: %3d\n" ${nfail} | |
| fi | |
| exit $ret |