| // SPDX-License-Identifier: GPL-2.0 | |
| /* | |
| * Test functionality of BPF filters with SO_REUSEPORT. This program creates | |
| * an SO_REUSEPORT receiver group containing one socket per CPU core. It then | |
| * creates a BPF program that will select a socket from this group based | |
| * on the core id that receives the packet. The sending code artificially | |
| * moves itself to run on different core ids and sends one message from | |
| * each core. Since these packets are delivered over loopback, they should | |
| * arrive on the same core that sent them. The receiving code then ensures | |
| * that the packet was received on the socket for the corresponding core id. | |
| * This entire process is done for several different core id permutations | |
| * and for each IPv4/IPv6 and TCP/UDP combination. | |
| */ | |
| #define _GNU_SOURCE | |
| #include <arpa/inet.h> | |
| #include <errno.h> | |
| #include <error.h> | |
| #include <linux/filter.h> | |
| #include <linux/in.h> | |
| #include <linux/unistd.h> | |
| #include <sched.h> | |
| #include <stdio.h> | |
| #include <stdlib.h> | |
| #include <string.h> | |
| #include <sys/epoll.h> | |
| #include <sys/types.h> | |
| #include <sys/socket.h> | |
| #include <unistd.h> | |
| static const int PORT = 8888; | |
| static void build_rcv_group(int *rcv_fd, size_t len, int family, int proto) | |
| { | |
| struct sockaddr_storage addr; | |
| struct sockaddr_in *addr4; | |
| struct sockaddr_in6 *addr6; | |
| size_t i; | |
| int opt; | |
| switch (family) { | |
| case AF_INET: | |
| addr4 = (struct sockaddr_in *)&addr; | |
| addr4->sin_family = AF_INET; | |
| addr4->sin_addr.s_addr = htonl(INADDR_ANY); | |
| addr4->sin_port = htons(PORT); | |
| break; | |
| case AF_INET6: | |
| addr6 = (struct sockaddr_in6 *)&addr; | |
| addr6->sin6_family = AF_INET6; | |
| addr6->sin6_addr = in6addr_any; | |
| addr6->sin6_port = htons(PORT); | |
| break; | |
| default: | |
| error(1, 0, "Unsupported family %d", family); | |
| } | |
| for (i = 0; i < len; ++i) { | |
| rcv_fd[i] = socket(family, proto, 0); | |
| if (rcv_fd[i] < 0) | |
| error(1, errno, "failed to create receive socket"); | |
| opt = 1; | |
| if (setsockopt(rcv_fd[i], SOL_SOCKET, SO_REUSEPORT, &opt, | |
| sizeof(opt))) | |
| error(1, errno, "failed to set SO_REUSEPORT"); | |
| if (bind(rcv_fd[i], (struct sockaddr *)&addr, sizeof(addr))) | |
| error(1, errno, "failed to bind receive socket"); | |
| if (proto == SOCK_STREAM && listen(rcv_fd[i], len * 10)) | |
| error(1, errno, "failed to listen on receive port"); | |
| } | |
| } | |
| static void attach_bpf(int fd) | |
| { | |
| struct sock_filter code[] = { | |
| /* A = raw_smp_processor_id() */ | |
| { BPF_LD | BPF_W | BPF_ABS, 0, 0, SKF_AD_OFF + SKF_AD_CPU }, | |
| /* return A */ | |
| { BPF_RET | BPF_A, 0, 0, 0 }, | |
| }; | |
| struct sock_fprog p = { | |
| .len = 2, | |
| .filter = code, | |
| }; | |
| if (setsockopt(fd, SOL_SOCKET, SO_ATTACH_REUSEPORT_CBPF, &p, sizeof(p))) | |
| error(1, errno, "failed to set SO_ATTACH_REUSEPORT_CBPF"); | |
| } | |
| static void send_from_cpu(int cpu_id, int family, int proto) | |
| { | |
| struct sockaddr_storage saddr, daddr; | |
| struct sockaddr_in *saddr4, *daddr4; | |
| struct sockaddr_in6 *saddr6, *daddr6; | |
| cpu_set_t cpu_set; | |
| int fd; | |
| switch (family) { | |
| case AF_INET: | |
| saddr4 = (struct sockaddr_in *)&saddr; | |
| saddr4->sin_family = AF_INET; | |
| saddr4->sin_addr.s_addr = htonl(INADDR_ANY); | |
| saddr4->sin_port = 0; | |
| daddr4 = (struct sockaddr_in *)&daddr; | |
| daddr4->sin_family = AF_INET; | |
| daddr4->sin_addr.s_addr = htonl(INADDR_LOOPBACK); | |
| daddr4->sin_port = htons(PORT); | |
| break; | |
| case AF_INET6: | |
| saddr6 = (struct sockaddr_in6 *)&saddr; | |
| saddr6->sin6_family = AF_INET6; | |
| saddr6->sin6_addr = in6addr_any; | |
| saddr6->sin6_port = 0; | |
| daddr6 = (struct sockaddr_in6 *)&daddr; | |
| daddr6->sin6_family = AF_INET6; | |
| daddr6->sin6_addr = in6addr_loopback; | |
| daddr6->sin6_port = htons(PORT); | |
| break; | |
| default: | |
| error(1, 0, "Unsupported family %d", family); | |
| } | |
| memset(&cpu_set, 0, sizeof(cpu_set)); | |
| CPU_SET(cpu_id, &cpu_set); | |
| if (sched_setaffinity(0, sizeof(cpu_set), &cpu_set) < 0) | |
| error(1, errno, "failed to pin to cpu"); | |
| fd = socket(family, proto, 0); | |
| if (fd < 0) | |
| error(1, errno, "failed to create send socket"); | |
| if (bind(fd, (struct sockaddr *)&saddr, sizeof(saddr))) | |
| error(1, errno, "failed to bind send socket"); | |
| if (connect(fd, (struct sockaddr *)&daddr, sizeof(daddr))) | |
| error(1, errno, "failed to connect send socket"); | |
| if (send(fd, "a", 1, 0) < 0) | |
| error(1, errno, "failed to send message"); | |
| close(fd); | |
| } | |
| static | |
| void receive_on_cpu(int *rcv_fd, int len, int epfd, int cpu_id, int proto) | |
| { | |
| struct epoll_event ev; | |
| int i, fd; | |
| char buf[8]; | |
| i = epoll_wait(epfd, &ev, 1, -1); | |
| if (i < 0) | |
| error(1, errno, "epoll_wait failed"); | |
| if (proto == SOCK_STREAM) { | |
| fd = accept(ev.data.fd, NULL, NULL); | |
| if (fd < 0) | |
| error(1, errno, "failed to accept"); | |
| i = recv(fd, buf, sizeof(buf), 0); | |
| close(fd); | |
| } else { | |
| i = recv(ev.data.fd, buf, sizeof(buf), 0); | |
| } | |
| if (i < 0) | |
| error(1, errno, "failed to recv"); | |
| for (i = 0; i < len; ++i) | |
| if (ev.data.fd == rcv_fd[i]) | |
| break; | |
| if (i == len) | |
| error(1, 0, "failed to find socket"); | |
| fprintf(stderr, "send cpu %d, receive socket %d\n", cpu_id, i); | |
| if (cpu_id != i) | |
| error(1, 0, "cpu id/receive socket mismatch"); | |
| } | |
| static void test(int *rcv_fd, int len, int family, int proto) | |
| { | |
| struct epoll_event ev; | |
| int epfd, cpu; | |
| build_rcv_group(rcv_fd, len, family, proto); | |
| attach_bpf(rcv_fd[0]); | |
| epfd = epoll_create(1); | |
| if (epfd < 0) | |
| error(1, errno, "failed to create epoll"); | |
| for (cpu = 0; cpu < len; ++cpu) { | |
| ev.events = EPOLLIN; | |
| ev.data.fd = rcv_fd[cpu]; | |
| if (epoll_ctl(epfd, EPOLL_CTL_ADD, rcv_fd[cpu], &ev)) | |
| error(1, errno, "failed to register sock epoll"); | |
| } | |
| /* Forward iterate */ | |
| for (cpu = 0; cpu < len; ++cpu) { | |
| send_from_cpu(cpu, family, proto); | |
| receive_on_cpu(rcv_fd, len, epfd, cpu, proto); | |
| } | |
| /* Reverse iterate */ | |
| for (cpu = len - 1; cpu >= 0; --cpu) { | |
| send_from_cpu(cpu, family, proto); | |
| receive_on_cpu(rcv_fd, len, epfd, cpu, proto); | |
| } | |
| /* Even cores */ | |
| for (cpu = 0; cpu < len; cpu += 2) { | |
| send_from_cpu(cpu, family, proto); | |
| receive_on_cpu(rcv_fd, len, epfd, cpu, proto); | |
| } | |
| /* Odd cores */ | |
| for (cpu = 1; cpu < len; cpu += 2) { | |
| send_from_cpu(cpu, family, proto); | |
| receive_on_cpu(rcv_fd, len, epfd, cpu, proto); | |
| } | |
| close(epfd); | |
| for (cpu = 0; cpu < len; ++cpu) | |
| close(rcv_fd[cpu]); | |
| } | |
| int main(void) | |
| { | |
| int *rcv_fd, cpus; | |
| cpus = sysconf(_SC_NPROCESSORS_ONLN); | |
| if (cpus <= 0) | |
| error(1, errno, "failed counting cpus"); | |
| rcv_fd = calloc(cpus, sizeof(int)); | |
| if (!rcv_fd) | |
| error(1, 0, "failed to allocate array"); | |
| fprintf(stderr, "---- IPv4 UDP ----\n"); | |
| test(rcv_fd, cpus, AF_INET, SOCK_DGRAM); | |
| fprintf(stderr, "---- IPv6 UDP ----\n"); | |
| test(rcv_fd, cpus, AF_INET6, SOCK_DGRAM); | |
| fprintf(stderr, "---- IPv4 TCP ----\n"); | |
| test(rcv_fd, cpus, AF_INET, SOCK_STREAM); | |
| fprintf(stderr, "---- IPv6 TCP ----\n"); | |
| test(rcv_fd, cpus, AF_INET6, SOCK_STREAM); | |
| free(rcv_fd); | |
| fprintf(stderr, "SUCCESS\n"); | |
| return 0; | |
| } |