| // SPDX-License-Identifier: GPL-2.0 | |
| /* | |
| * Test key rotation for TFO. | |
| * New keys are 'rotated' in two steps: | |
| * 1) Add new key as the 'backup' key 'behind' the primary key | |
| * 2) Make new key the primary by swapping the backup and primary keys | |
| * | |
| * The rotation is done in stages using multiple sockets bound | |
| * to the same port via SO_REUSEPORT. This simulates key rotation | |
| * behind say a load balancer. We verify that across the rotation | |
| * there are no cases in which a cookie is not accepted by verifying | |
| * that TcpExtTCPFastOpenPassiveFail remains 0. | |
| */ | |
| #define _GNU_SOURCE | |
| #include <arpa/inet.h> | |
| #include <errno.h> | |
| #include <error.h> | |
| #include <stdbool.h> | |
| #include <stdio.h> | |
| #include <stdlib.h> | |
| #include <string.h> | |
| #include <sys/epoll.h> | |
| #include <unistd.h> | |
| #include <netinet/tcp.h> | |
| #include <fcntl.h> | |
| #include <time.h> | |
| #ifndef TCP_FASTOPEN_KEY | |
| #define TCP_FASTOPEN_KEY 33 | |
| #endif | |
| #define N_LISTEN 10 | |
| #define PROC_FASTOPEN_KEY "/proc/sys/net/ipv4/tcp_fastopen_key" | |
| #define KEY_LENGTH 16 | |
| #ifndef ARRAY_SIZE | |
| #define ARRAY_SIZE(arr) (sizeof(arr) / sizeof((arr)[0])) | |
| #endif | |
| static bool do_ipv6; | |
| static bool do_sockopt; | |
| static bool do_rotate; | |
| static int key_len = KEY_LENGTH; | |
| static int rcv_fds[N_LISTEN]; | |
| static int proc_fd; | |
| static const char *IP4_ADDR = "127.0.0.1"; | |
| static const char *IP6_ADDR = "::1"; | |
| static const int PORT = 8891; | |
| static void get_keys(int fd, uint32_t *keys) | |
| { | |
| char buf[128]; | |
| socklen_t len = KEY_LENGTH * 2; | |
| if (do_sockopt) { | |
| if (getsockopt(fd, SOL_TCP, TCP_FASTOPEN_KEY, keys, &len)) | |
| error(1, errno, "Unable to get key"); | |
| return; | |
| } | |
| lseek(proc_fd, 0, SEEK_SET); | |
| if (read(proc_fd, buf, sizeof(buf)) <= 0) | |
| error(1, errno, "Unable to read %s", PROC_FASTOPEN_KEY); | |
| if (sscanf(buf, "%x-%x-%x-%x,%x-%x-%x-%x", keys, keys + 1, keys + 2, | |
| keys + 3, keys + 4, keys + 5, keys + 6, keys + 7) != 8) | |
| error(1, 0, "Unable to parse %s", PROC_FASTOPEN_KEY); | |
| } | |
| static void set_keys(int fd, uint32_t *keys) | |
| { | |
| char buf[128]; | |
| if (do_sockopt) { | |
| if (setsockopt(fd, SOL_TCP, TCP_FASTOPEN_KEY, keys, | |
| key_len)) | |
| error(1, errno, "Unable to set key"); | |
| return; | |
| } | |
| if (do_rotate) | |
| snprintf(buf, 128, "%08x-%08x-%08x-%08x,%08x-%08x-%08x-%08x", | |
| keys[0], keys[1], keys[2], keys[3], keys[4], keys[5], | |
| keys[6], keys[7]); | |
| else | |
| snprintf(buf, 128, "%08x-%08x-%08x-%08x", | |
| keys[0], keys[1], keys[2], keys[3]); | |
| lseek(proc_fd, 0, SEEK_SET); | |
| if (write(proc_fd, buf, sizeof(buf)) <= 0) | |
| error(1, errno, "Unable to write %s", PROC_FASTOPEN_KEY); | |
| } | |
| static void build_rcv_fd(int family, int proto, int *rcv_fds) | |
| { | |
| struct sockaddr_in addr4 = {0}; | |
| struct sockaddr_in6 addr6 = {0}; | |
| struct sockaddr *addr; | |
| int opt = 1, i, sz; | |
| int qlen = 100; | |
| uint32_t keys[8]; | |
| switch (family) { | |
| case AF_INET: | |
| addr4.sin_family = family; | |
| addr4.sin_addr.s_addr = htonl(INADDR_ANY); | |
| addr4.sin_port = htons(PORT); | |
| sz = sizeof(addr4); | |
| addr = (struct sockaddr *)&addr4; | |
| break; | |
| case AF_INET6: | |
| addr6.sin6_family = AF_INET6; | |
| addr6.sin6_addr = in6addr_any; | |
| addr6.sin6_port = htons(PORT); | |
| sz = sizeof(addr6); | |
| addr = (struct sockaddr *)&addr6; | |
| break; | |
| default: | |
| error(1, 0, "Unsupported family %d", family); | |
| /* clang does not recognize error() above as terminating | |
| * the program, so it complains that saddr, sz are | |
| * not initialized when this code path is taken. Silence it. | |
| */ | |
| return; | |
| } | |
| for (i = 0; i < ARRAY_SIZE(keys); i++) | |
| keys[i] = rand(); | |
| for (i = 0; i < N_LISTEN; i++) { | |
| rcv_fds[i] = socket(family, proto, 0); | |
| if (rcv_fds[i] < 0) | |
| error(1, errno, "failed to create receive socket"); | |
| if (setsockopt(rcv_fds[i], SOL_SOCKET, SO_REUSEPORT, &opt, | |
| sizeof(opt))) | |
| error(1, errno, "failed to set SO_REUSEPORT"); | |
| if (bind(rcv_fds[i], addr, sz)) | |
| error(1, errno, "failed to bind receive socket"); | |
| if (setsockopt(rcv_fds[i], SOL_TCP, TCP_FASTOPEN, &qlen, | |
| sizeof(qlen))) | |
| error(1, errno, "failed to set TCP_FASTOPEN"); | |
| set_keys(rcv_fds[i], keys); | |
| if (proto == SOCK_STREAM && listen(rcv_fds[i], 10)) | |
| error(1, errno, "failed to listen on receive port"); | |
| } | |
| } | |
| static int connect_and_send(int family, int proto) | |
| { | |
| struct sockaddr_in saddr4 = {0}; | |
| struct sockaddr_in daddr4 = {0}; | |
| struct sockaddr_in6 saddr6 = {0}; | |
| struct sockaddr_in6 daddr6 = {0}; | |
| struct sockaddr *saddr, *daddr; | |
| int fd, sz, ret; | |
| char data[1]; | |
| switch (family) { | |
| case AF_INET: | |
| saddr4.sin_family = AF_INET; | |
| saddr4.sin_addr.s_addr = htonl(INADDR_ANY); | |
| saddr4.sin_port = 0; | |
| daddr4.sin_family = AF_INET; | |
| if (!inet_pton(family, IP4_ADDR, &daddr4.sin_addr.s_addr)) | |
| error(1, errno, "inet_pton failed: %s", IP4_ADDR); | |
| daddr4.sin_port = htons(PORT); | |
| sz = sizeof(saddr4); | |
| saddr = (struct sockaddr *)&saddr4; | |
| daddr = (struct sockaddr *)&daddr4; | |
| break; | |
| case AF_INET6: | |
| saddr6.sin6_family = AF_INET6; | |
| saddr6.sin6_addr = in6addr_any; | |
| daddr6.sin6_family = AF_INET6; | |
| if (!inet_pton(family, IP6_ADDR, &daddr6.sin6_addr)) | |
| error(1, errno, "inet_pton failed: %s", IP6_ADDR); | |
| daddr6.sin6_port = htons(PORT); | |
| sz = sizeof(saddr6); | |
| saddr = (struct sockaddr *)&saddr6; | |
| daddr = (struct sockaddr *)&daddr6; | |
| break; | |
| default: | |
| error(1, 0, "Unsupported family %d", family); | |
| /* clang does not recognize error() above as terminating | |
| * the program, so it complains that saddr, daddr, sz are | |
| * not initialized when this code path is taken. Silence it. | |
| */ | |
| return -1; | |
| } | |
| fd = socket(family, proto, 0); | |
| if (fd < 0) | |
| error(1, errno, "failed to create send socket"); | |
| if (bind(fd, saddr, sz)) | |
| error(1, errno, "failed to bind send socket"); | |
| data[0] = 'a'; | |
| ret = sendto(fd, data, 1, MSG_FASTOPEN, daddr, sz); | |
| if (ret != 1) | |
| error(1, errno, "failed to sendto"); | |
| return fd; | |
| } | |
| static bool is_listen_fd(int fd) | |
| { | |
| int i; | |
| for (i = 0; i < N_LISTEN; i++) { | |
| if (rcv_fds[i] == fd) | |
| return true; | |
| } | |
| return false; | |
| } | |
| static void rotate_key(int fd) | |
| { | |
| static int iter; | |
| static uint32_t new_key[4]; | |
| uint32_t keys[8]; | |
| uint32_t tmp_key[4]; | |
| int i; | |
| if (iter < N_LISTEN) { | |
| /* first set new key as backups */ | |
| if (iter == 0) { | |
| for (i = 0; i < ARRAY_SIZE(new_key); i++) | |
| new_key[i] = rand(); | |
| } | |
| get_keys(fd, keys); | |
| memcpy(keys + 4, new_key, KEY_LENGTH); | |
| set_keys(fd, keys); | |
| } else { | |
| /* swap the keys */ | |
| get_keys(fd, keys); | |
| memcpy(tmp_key, keys + 4, KEY_LENGTH); | |
| memcpy(keys + 4, keys, KEY_LENGTH); | |
| memcpy(keys, tmp_key, KEY_LENGTH); | |
| set_keys(fd, keys); | |
| } | |
| if (++iter >= (N_LISTEN * 2)) | |
| iter = 0; | |
| } | |
| static void run_one_test(int family) | |
| { | |
| struct epoll_event ev; | |
| int i, send_fd; | |
| int n_loops = 10000; | |
| int rotate_key_fd = 0; | |
| int key_rotate_interval = 50; | |
| int fd, epfd; | |
| char buf[1]; | |
| build_rcv_fd(family, SOCK_STREAM, rcv_fds); | |
| epfd = epoll_create(1); | |
| if (epfd < 0) | |
| error(1, errno, "failed to create epoll"); | |
| ev.events = EPOLLIN; | |
| for (i = 0; i < N_LISTEN; i++) { | |
| ev.data.fd = rcv_fds[i]; | |
| if (epoll_ctl(epfd, EPOLL_CTL_ADD, rcv_fds[i], &ev)) | |
| error(1, errno, "failed to register sock epoll"); | |
| } | |
| while (n_loops--) { | |
| send_fd = connect_and_send(family, SOCK_STREAM); | |
| if (do_rotate && ((n_loops % key_rotate_interval) == 0)) { | |
| rotate_key(rcv_fds[rotate_key_fd]); | |
| if (++rotate_key_fd >= N_LISTEN) | |
| rotate_key_fd = 0; | |
| } | |
| while (1) { | |
| i = epoll_wait(epfd, &ev, 1, -1); | |
| if (i < 0) | |
| error(1, errno, "epoll_wait failed"); | |
| if (is_listen_fd(ev.data.fd)) { | |
| fd = accept(ev.data.fd, NULL, NULL); | |
| if (fd < 0) | |
| error(1, errno, "failed to accept"); | |
| ev.data.fd = fd; | |
| if (epoll_ctl(epfd, EPOLL_CTL_ADD, fd, &ev)) | |
| error(1, errno, "failed epoll add"); | |
| continue; | |
| } | |
| i = recv(ev.data.fd, buf, sizeof(buf), 0); | |
| if (i != 1) | |
| error(1, errno, "failed recv data"); | |
| if (epoll_ctl(epfd, EPOLL_CTL_DEL, ev.data.fd, NULL)) | |
| error(1, errno, "failed epoll del"); | |
| close(ev.data.fd); | |
| break; | |
| } | |
| close(send_fd); | |
| } | |
| for (i = 0; i < N_LISTEN; i++) | |
| close(rcv_fds[i]); | |
| } | |
| static void parse_opts(int argc, char **argv) | |
| { | |
| int c; | |
| while ((c = getopt(argc, argv, "46sr")) != -1) { | |
| switch (c) { | |
| case '4': | |
| do_ipv6 = false; | |
| break; | |
| case '6': | |
| do_ipv6 = true; | |
| break; | |
| case 's': | |
| do_sockopt = true; | |
| break; | |
| case 'r': | |
| do_rotate = true; | |
| key_len = KEY_LENGTH * 2; | |
| break; | |
| default: | |
| error(1, 0, "%s: parse error", argv[0]); | |
| } | |
| } | |
| } | |
| int main(int argc, char **argv) | |
| { | |
| parse_opts(argc, argv); | |
| proc_fd = open(PROC_FASTOPEN_KEY, O_RDWR); | |
| if (proc_fd < 0) | |
| error(1, errno, "Unable to open %s", PROC_FASTOPEN_KEY); | |
| srand(time(NULL)); | |
| if (do_ipv6) | |
| run_one_test(AF_INET6); | |
| else | |
| run_one_test(AF_INET); | |
| close(proc_fd); | |
| fprintf(stderr, "PASS\n"); | |
| return 0; | |
| } |