| // SPDX-License-Identifier: GPL-2.0 | |
| /* | |
| * Cache Allocation Technology (CAT) test | |
| * | |
| * Copyright (C) 2018 Intel Corporation | |
| * | |
| * Authors: | |
| * Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>, | |
| * Fenghua Yu <fenghua.yu@intel.com> | |
| */ | |
| #include "resctrl.h" | |
| #include <unistd.h> | |
| #define RESULT_FILE_NAME1 "result_cat1" | |
| #define RESULT_FILE_NAME2 "result_cat2" | |
| #define NUM_OF_RUNS 5 | |
| #define MAX_DIFF_PERCENT 4 | |
| #define MAX_DIFF 1000000 | |
| int count_of_bits; | |
| char cbm_mask[256]; | |
| unsigned long long_mask; | |
| unsigned long cache_size; | |
| /* | |
| * Change schemata. Write schemata to specified | |
| * con_mon grp, mon_grp in resctrl FS. | |
| * Run 5 times in order to get average values. | |
| */ | |
| static int cat_setup(int num, ...) | |
| { | |
| struct resctrl_val_param *p; | |
| char schemata[64]; | |
| va_list param; | |
| int ret = 0; | |
| va_start(param, num); | |
| p = va_arg(param, struct resctrl_val_param *); | |
| va_end(param); | |
| /* Run NUM_OF_RUNS times */ | |
| if (p->num_of_runs >= NUM_OF_RUNS) | |
| return -1; | |
| if (p->num_of_runs == 0) { | |
| sprintf(schemata, "%lx", p->mask); | |
| ret = write_schemata(p->ctrlgrp, schemata, p->cpu_no, | |
| p->resctrl_val); | |
| } | |
| p->num_of_runs++; | |
| return ret; | |
| } | |
| static void show_cache_info(unsigned long sum_llc_perf_miss, int no_of_bits, | |
| unsigned long span) | |
| { | |
| unsigned long allocated_cache_lines = span / 64; | |
| unsigned long avg_llc_perf_miss = 0; | |
| float diff_percent; | |
| avg_llc_perf_miss = sum_llc_perf_miss / (NUM_OF_RUNS - 1); | |
| diff_percent = ((float)allocated_cache_lines - avg_llc_perf_miss) / | |
| allocated_cache_lines * 100; | |
| printf("%sok CAT: cache miss rate within %d%%\n", | |
| !is_amd && abs((int)diff_percent) > MAX_DIFF_PERCENT ? | |
| "not " : "", MAX_DIFF_PERCENT); | |
| tests_run++; | |
| printf("# Percent diff=%d\n", abs((int)diff_percent)); | |
| printf("# Number of bits: %d\n", no_of_bits); | |
| printf("# Avg_llc_perf_miss: %lu\n", avg_llc_perf_miss); | |
| printf("# Allocated cache lines: %lu\n", allocated_cache_lines); | |
| } | |
| static int check_results(struct resctrl_val_param *param) | |
| { | |
| char *token_array[8], temp[512]; | |
| unsigned long sum_llc_perf_miss = 0; | |
| int runs = 0, no_of_bits = 0; | |
| FILE *fp; | |
| printf("# Checking for pass/fail\n"); | |
| fp = fopen(param->filename, "r"); | |
| if (!fp) { | |
| perror("# Cannot open file"); | |
| return errno; | |
| } | |
| while (fgets(temp, sizeof(temp), fp)) { | |
| char *token = strtok(temp, ":\t"); | |
| int fields = 0; | |
| while (token) { | |
| token_array[fields++] = token; | |
| token = strtok(NULL, ":\t"); | |
| } | |
| /* | |
| * Discard the first value which is inaccurate due to monitoring | |
| * setup transition phase. | |
| */ | |
| if (runs > 0) | |
| sum_llc_perf_miss += strtoul(token_array[3], NULL, 0); | |
| runs++; | |
| } | |
| fclose(fp); | |
| no_of_bits = count_bits(param->mask); | |
| show_cache_info(sum_llc_perf_miss, no_of_bits, param->span); | |
| return 0; | |
| } | |
| void cat_test_cleanup(void) | |
| { | |
| remove(RESULT_FILE_NAME1); | |
| remove(RESULT_FILE_NAME2); | |
| } | |
| int cat_perf_miss_val(int cpu_no, int n, char *cache_type) | |
| { | |
| unsigned long l_mask, l_mask_1; | |
| int ret, pipefd[2], sibling_cpu_no; | |
| char pipe_message; | |
| pid_t bm_pid; | |
| cache_size = 0; | |
| ret = remount_resctrlfs(true); | |
| if (ret) | |
| return ret; | |
| if (!validate_resctrl_feature_request("cat")) | |
| return -1; | |
| /* Get default cbm mask for L3/L2 cache */ | |
| ret = get_cbm_mask(cache_type); | |
| if (ret) | |
| return ret; | |
| long_mask = strtoul(cbm_mask, NULL, 16); | |
| /* Get L3/L2 cache size */ | |
| ret = get_cache_size(cpu_no, cache_type, &cache_size); | |
| if (ret) | |
| return ret; | |
| printf("cache size :%lu\n", cache_size); | |
| /* Get max number of bits from default-cabm mask */ | |
| count_of_bits = count_bits(long_mask); | |
| if (n < 1 || n > count_of_bits - 1) { | |
| printf("Invalid input value for no_of_bits n!\n"); | |
| printf("Please Enter value in range 1 to %d\n", | |
| count_of_bits - 1); | |
| return -1; | |
| } | |
| /* Get core id from same socket for running another thread */ | |
| sibling_cpu_no = get_core_sibling(cpu_no); | |
| if (sibling_cpu_no < 0) | |
| return -1; | |
| struct resctrl_val_param param = { | |
| .resctrl_val = "cat", | |
| .cpu_no = cpu_no, | |
| .mum_resctrlfs = 0, | |
| .setup = cat_setup, | |
| }; | |
| l_mask = long_mask >> n; | |
| l_mask_1 = ~l_mask & long_mask; | |
| /* Set param values for parent thread which will be allocated bitmask | |
| * with (max_bits - n) bits | |
| */ | |
| param.span = cache_size * (count_of_bits - n) / count_of_bits; | |
| strcpy(param.ctrlgrp, "c2"); | |
| strcpy(param.mongrp, "m2"); | |
| strcpy(param.filename, RESULT_FILE_NAME2); | |
| param.mask = l_mask; | |
| param.num_of_runs = 0; | |
| if (pipe(pipefd)) { | |
| perror("# Unable to create pipe"); | |
| return errno; | |
| } | |
| bm_pid = fork(); | |
| /* Set param values for child thread which will be allocated bitmask | |
| * with n bits | |
| */ | |
| if (bm_pid == 0) { | |
| param.mask = l_mask_1; | |
| strcpy(param.ctrlgrp, "c1"); | |
| strcpy(param.mongrp, "m1"); | |
| param.span = cache_size * n / count_of_bits; | |
| strcpy(param.filename, RESULT_FILE_NAME1); | |
| param.num_of_runs = 0; | |
| param.cpu_no = sibling_cpu_no; | |
| } | |
| remove(param.filename); | |
| ret = cat_val(¶m); | |
| if (ret) | |
| return ret; | |
| ret = check_results(¶m); | |
| if (ret) | |
| return ret; | |
| if (bm_pid == 0) { | |
| /* Tell parent that child is ready */ | |
| close(pipefd[0]); | |
| pipe_message = 1; | |
| if (write(pipefd[1], &pipe_message, sizeof(pipe_message)) < | |
| sizeof(pipe_message)) { | |
| close(pipefd[1]); | |
| perror("# failed signaling parent process"); | |
| return errno; | |
| } | |
| close(pipefd[1]); | |
| while (1) | |
| ; | |
| } else { | |
| /* Parent waits for child to be ready. */ | |
| close(pipefd[1]); | |
| pipe_message = 0; | |
| while (pipe_message != 1) { | |
| if (read(pipefd[0], &pipe_message, | |
| sizeof(pipe_message)) < sizeof(pipe_message)) { | |
| perror("# failed reading from child process"); | |
| break; | |
| } | |
| } | |
| close(pipefd[0]); | |
| kill(bm_pid, SIGKILL); | |
| } | |
| cat_test_cleanup(); | |
| if (bm_pid) | |
| umount_resctrlfs(); | |
| return 0; | |
| } |