| # SPDX-License-Identifier: GPL-2.0-only |
| %YAML 1.2 |
| --- |
| $id: http://devicetree.org/schemas/display/samsung/samsung,exynos-hdmi.yaml# |
| $schema: http://devicetree.org/meta-schemas/core.yaml# |
| |
| title: Samsung Exynos SoC HDMI |
| |
| maintainers: |
| - Inki Dae <inki.dae@samsung.com> |
| - Joonyoung Shim <jy0922.shim@samsung.com> |
| - Seung-Woo Kim <sw0312.kim@samsung.com> |
| - Kyungmin Park <kyungmin.park@samsung.com> |
| - Krzysztof Kozlowski <krzk@kernel.org> |
| |
| properties: |
| compatible: |
| enum: |
| - samsung,exynos4210-hdmi |
| - samsung,exynos4212-hdmi |
| - samsung,exynos5420-hdmi |
| - samsung,exynos5433-hdmi |
| |
| clocks: |
| minItems: 5 |
| maxItems: 10 |
| |
| clock-names: |
| minItems: 5 |
| maxItems: 10 |
| |
| ddc: |
| $ref: /schemas/types.yaml#/definitions/phandle |
| description: |
| Phandle to the HDMI DDC node. |
| |
| hdmi-en-supply: |
| description: |
| Provides voltage source for DCC lines available on HDMI connector. When |
| there is no power provided for DDC epprom, some TV-sets do not pulls up |
| HPD (hot plug detect) line, what causes HDMI block to stay turned off. |
| When provided, the regulator allows TV-set correctly signal HPD event. |
| |
| hpd-gpios: |
| maxItems: 1 |
| description: |
| A GPIO line connected to HPD |
| |
| interrupts: |
| maxItems: 1 |
| |
| phy: |
| $ref: /schemas/types.yaml#/definitions/phandle |
| description: Phandle to the HDMI PHY node. |
| |
| ports: |
| $ref: /schemas/graph.yaml#/properties/ports |
| description: |
| Contains a port which is connected to mic node. |
| |
| power-domains: |
| maxItems: 1 |
| |
| reg: |
| maxItems: 1 |
| |
| samsung,syscon-phandle: |
| $ref: /schemas/types.yaml#/definitions/phandle |
| description: |
| Phandle to the PMU system controller node. |
| |
| samsung,sysreg-phandle: |
| $ref: /schemas/types.yaml#/definitions/phandle |
| description: |
| Phandle to DISP system controller interface. |
| |
| '#sound-dai-cells': |
| const: 0 |
| |
| vdd-supply: |
| description: |
| VDD 1.0V HDMI TX. |
| |
| vdd_osc-supply: |
| description: |
| VDD 1.8V HDMI OSC. |
| |
| vdd_pll-supply: |
| description: |
| VDD 1.0V HDMI PLL. |
| |
| required: |
| - compatible |
| - clocks |
| - clock-names |
| - ddc |
| - hpd-gpios |
| - interrupts |
| - phy |
| - reg |
| - samsung,syscon-phandle |
| - '#sound-dai-cells' |
| - vdd-supply |
| - vdd_osc-supply |
| - vdd_pll-supply |
| |
| allOf: |
| - if: |
| properties: |
| compatible: |
| contains: |
| const: samsung,exynos5433-hdmi |
| then: |
| properties: |
| clocks: |
| items: |
| - description: Gate of HDMI IP APB bus. |
| - description: Gate of HDMI-PHY IP APB bus. |
| - description: Gate of HDMI TMDS clock. |
| - description: Gate of HDMI pixel clock. |
| - description: TMDS clock generated by HDMI-PHY. |
| - description: MUX used to switch between oscclk and tmds_clko, |
| respectively if HDMI-PHY is off and operational. |
| - description: Pixel clock generated by HDMI-PHY. |
| - description: MUX used to switch between oscclk and pixel_clko, |
| respectively if HDMI-PHY is off and operational. |
| - description: Oscillator clock, used as parent of following *_user |
| clocks in case HDMI-PHY is not operational. |
| - description: Gate of HDMI SPDIF clock. |
| clock-names: |
| items: |
| - const: hdmi_pclk |
| - const: hdmi_i_pclk |
| - const: i_tmds_clk |
| - const: i_pixel_clk |
| - const: tmds_clko |
| - const: tmds_clko_user |
| - const: pixel_clko |
| - const: pixel_clko_user |
| - const: oscclk |
| - const: i_spdif_clk |
| required: |
| - samsung,sysreg-phandle |
| else: |
| properties: |
| clocks: |
| items: |
| - description: Gate of HDMI IP bus clock. |
| - description: Gate of HDMI special clock. |
| - description: Pixel special clock, one of the two possible inputs |
| of HDMI clock mux. |
| - description: HDMI PHY clock output, one of two possible inputs of |
| HDMI clock mux. |
| - description: It is required by the driver to switch between the 2 |
| parents i.e. sclk_pixel and sclk_hdmiphy. If hdmiphy is stable |
| after configuration, parent is set to sclk_hdmiphy else |
| sclk_pixel. |
| clock-names: |
| items: |
| - const: hdmi |
| - const: sclk_hdmi |
| - const: sclk_pixel |
| - const: sclk_hdmiphy |
| - const: mout_hdmi |
| |
| additionalProperties: false |
| |
| examples: |
| - | |
| #include <dt-bindings/clock/exynos5433.h> |
| #include <dt-bindings/gpio/gpio.h> |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| |
| hdmi@13970000 { |
| compatible = "samsung,exynos5433-hdmi"; |
| reg = <0x13970000 0x70000>; |
| interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&cmu_disp CLK_PCLK_HDMI>, |
| <&cmu_disp CLK_PCLK_HDMIPHY>, |
| <&cmu_disp CLK_PHYCLK_HDMIPHY_TMDS_CLKO>, |
| <&cmu_disp CLK_PHYCLK_HDMI_PIXEL>, |
| <&cmu_disp CLK_PHYCLK_HDMIPHY_TMDS_CLKO_PHY>, |
| <&cmu_disp CLK_MOUT_PHYCLK_HDMIPHY_TMDS_CLKO_USER>, |
| <&cmu_disp CLK_PHYCLK_HDMIPHY_PIXEL_CLKO_PHY>, |
| <&cmu_disp CLK_MOUT_PHYCLK_HDMIPHY_PIXEL_CLKO_USER>, |
| <&xxti>, |
| <&cmu_disp CLK_SCLK_HDMI_SPDIF>; |
| clock-names = "hdmi_pclk", |
| "hdmi_i_pclk", |
| "i_tmds_clk", |
| "i_pixel_clk", |
| "tmds_clko", |
| "tmds_clko_user", |
| "pixel_clko", |
| "pixel_clko_user", |
| "oscclk", |
| "i_spdif_clk"; |
| phy = <&hdmiphy>; |
| ddc = <&hsi2c_11>; |
| samsung,syscon-phandle = <&pmu_system_controller>; |
| samsung,sysreg-phandle = <&syscon_disp>; |
| #sound-dai-cells = <0>; |
| |
| hpd-gpios = <&gpa3 0 GPIO_ACTIVE_HIGH>; |
| vdd-supply = <&ldo6_reg>; |
| vdd_osc-supply = <&ldo7_reg>; |
| vdd_pll-supply = <&ldo6_reg>; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@0 { |
| reg = <0>; |
| hdmi_to_tv: endpoint { |
| remote-endpoint = <&tv_to_hdmi>; |
| }; |
| }; |
| |
| port@1 { |
| reg = <1>; |
| hdmi_to_mhl: endpoint { |
| remote-endpoint = <&mhl_to_hdmi>; |
| }; |
| }; |
| }; |
| }; |
