| /* |
| * DVB USB Linux driver for Alcor Micro AU6610 DVB-T USB2.0. |
| * |
| * Copyright (C) 2006 Antti Palosaari <crope@iki.fi> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| */ |
| |
| #include "au6610.h" |
| #include "zl10353.h" |
| #include "qt1010.h" |
| |
| /* debug */ |
| static int dvb_usb_au6610_debug; |
| module_param_named(debug, dvb_usb_au6610_debug, int, 0644); |
| MODULE_PARM_DESC(debug, "set debugging level" DVB_USB_DEBUG_STATUS); |
| DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); |
| |
| static int au6610_usb_msg(struct dvb_usb_device *d, u8 operation, u8 addr, |
| u8 *wbuf, u16 wlen, u8 *rbuf, u16 rlen) |
| { |
| int ret; |
| u16 index; |
| u8 *usb_buf; |
| |
| /* |
| * allocate enough for all known requests, |
| * read returns 5 and write 6 bytes |
| */ |
| usb_buf = kmalloc(6, GFP_KERNEL); |
| if (!usb_buf) |
| return -ENOMEM; |
| |
| switch (wlen) { |
| case 1: |
| index = wbuf[0] << 8; |
| break; |
| case 2: |
| index = wbuf[0] << 8; |
| index += wbuf[1]; |
| break; |
| default: |
| warn("wlen = %x, aborting.", wlen); |
| ret = -EINVAL; |
| goto error; |
| } |
| |
| ret = usb_control_msg(d->udev, usb_rcvctrlpipe(d->udev, 0), operation, |
| USB_TYPE_VENDOR|USB_DIR_IN, addr << 1, index, |
| usb_buf, 6, AU6610_USB_TIMEOUT); |
| if (ret < 0) |
| goto error; |
| |
| switch (operation) { |
| case AU6610_REQ_I2C_READ: |
| case AU6610_REQ_USB_READ: |
| /* requested value is always 5th byte in buffer */ |
| rbuf[0] = usb_buf[4]; |
| } |
| error: |
| kfree(usb_buf); |
| return ret; |
| } |
| |
| static int au6610_i2c_msg(struct dvb_usb_device *d, u8 addr, |
| u8 *wbuf, u16 wlen, u8 *rbuf, u16 rlen) |
| { |
| u8 request; |
| u8 wo = (rbuf == NULL || rlen == 0); /* write-only */ |
| |
| if (wo) { |
| request = AU6610_REQ_I2C_WRITE; |
| } else { /* rw */ |
| request = AU6610_REQ_I2C_READ; |
| } |
| |
| return au6610_usb_msg(d, request, addr, wbuf, wlen, rbuf, rlen); |
| } |
| |
| |
| /* I2C */ |
| static int au6610_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], |
| int num) |
| { |
| struct dvb_usb_device *d = i2c_get_adapdata(adap); |
| int i; |
| |
| if (num > 2) |
| return -EINVAL; |
| |
| if (mutex_lock_interruptible(&d->i2c_mutex) < 0) |
| return -EAGAIN; |
| |
| for (i = 0; i < num; i++) { |
| /* write/read request */ |
| if (i+1 < num && (msg[i+1].flags & I2C_M_RD)) { |
| if (au6610_i2c_msg(d, msg[i].addr, msg[i].buf, |
| msg[i].len, msg[i+1].buf, |
| msg[i+1].len) < 0) |
| break; |
| i++; |
| } else if (au6610_i2c_msg(d, msg[i].addr, msg[i].buf, |
| msg[i].len, NULL, 0) < 0) |
| break; |
| } |
| |
| mutex_unlock(&d->i2c_mutex); |
| return i; |
| } |
| |
| |
| static u32 au6610_i2c_func(struct i2c_adapter *adapter) |
| { |
| return I2C_FUNC_I2C; |
| } |
| |
| static struct i2c_algorithm au6610_i2c_algo = { |
| .master_xfer = au6610_i2c_xfer, |
| .functionality = au6610_i2c_func, |
| }; |
| |
| /* Callbacks for DVB USB */ |
| static struct zl10353_config au6610_zl10353_config = { |
| .demod_address = 0x0f, |
| .no_tuner = 1, |
| .parallel_ts = 1, |
| }; |
| |
| static int au6610_zl10353_frontend_attach(struct dvb_usb_adapter *adap) |
| { |
| adap->fe_adap[0].fe = dvb_attach(zl10353_attach, &au6610_zl10353_config, |
| &adap->dev->i2c_adap); |
| if (adap->fe_adap[0].fe == NULL) |
| return -ENODEV; |
| |
| return 0; |
| } |
| |
| static struct qt1010_config au6610_qt1010_config = { |
| .i2c_address = 0x62 |
| }; |
| |
| static int au6610_qt1010_tuner_attach(struct dvb_usb_adapter *adap) |
| { |
| return dvb_attach(qt1010_attach, |
| adap->fe_adap[0].fe, &adap->dev->i2c_adap, |
| &au6610_qt1010_config) == NULL ? -ENODEV : 0; |
| } |
| |
| /* DVB USB Driver stuff */ |
| static struct dvb_usb_device_properties au6610_properties; |
| |
| static int au6610_probe(struct usb_interface *intf, |
| const struct usb_device_id *id) |
| { |
| struct dvb_usb_device *d; |
| struct usb_host_interface *alt; |
| int ret; |
| |
| if (intf->num_altsetting < AU6610_ALTSETTING_COUNT) |
| return -ENODEV; |
| |
| ret = dvb_usb_device_init(intf, &au6610_properties, THIS_MODULE, &d, |
| adapter_nr); |
| if (ret == 0) { |
| alt = usb_altnum_to_altsetting(intf, AU6610_ALTSETTING); |
| |
| if (alt == NULL) { |
| deb_info("%s: no alt found!\n", __func__); |
| return -ENODEV; |
| } |
| ret = usb_set_interface(d->udev, alt->desc.bInterfaceNumber, |
| alt->desc.bAlternateSetting); |
| } |
| |
| return ret; |
| } |
| |
| static struct usb_device_id au6610_table [] = { |
| { USB_DEVICE(USB_VID_ALCOR_MICRO, USB_PID_SIGMATEK_DVB_110) }, |
| { } /* Terminating entry */ |
| }; |
| MODULE_DEVICE_TABLE(usb, au6610_table); |
| |
| static struct dvb_usb_device_properties au6610_properties = { |
| .caps = DVB_USB_IS_AN_I2C_ADAPTER, |
| |
| .usb_ctrl = DEVICE_SPECIFIC, |
| |
| .size_of_priv = 0, |
| |
| .num_adapters = 1, |
| .adapter = { |
| { |
| .num_frontends = 1, |
| .fe = {{ |
| .frontend_attach = au6610_zl10353_frontend_attach, |
| .tuner_attach = au6610_qt1010_tuner_attach, |
| |
| .stream = { |
| .type = USB_ISOC, |
| .count = 5, |
| .endpoint = 0x82, |
| .u = { |
| .isoc = { |
| .framesperurb = 40, |
| .framesize = 942, |
| .interval = 1, |
| } |
| } |
| }, |
| }}, |
| } |
| }, |
| |
| .i2c_algo = &au6610_i2c_algo, |
| |
| .num_device_descs = 1, |
| .devices = { |
| { |
| .name = "Sigmatek DVB-110 DVB-T USB2.0", |
| .cold_ids = {NULL}, |
| .warm_ids = {&au6610_table[0], NULL}, |
| }, |
| } |
| }; |
| |
| static struct usb_driver au6610_driver = { |
| .name = "dvb_usb_au6610", |
| .probe = au6610_probe, |
| .disconnect = dvb_usb_device_exit, |
| .id_table = au6610_table, |
| }; |
| |
| /* module stuff */ |
| static int __init au6610_module_init(void) |
| { |
| int ret; |
| |
| ret = usb_register(&au6610_driver); |
| if (ret) |
| err("usb_register failed. Error number %d", ret); |
| |
| return ret; |
| } |
| |
| static void __exit au6610_module_exit(void) |
| { |
| /* deregister this driver from the USB subsystem */ |
| usb_deregister(&au6610_driver); |
| } |
| |
| module_init(au6610_module_init); |
| module_exit(au6610_module_exit); |
| |
| MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>"); |
| MODULE_DESCRIPTION("Driver for Alcor Micro AU6610 DVB-T USB2.0"); |
| MODULE_VERSION("0.1"); |
| MODULE_LICENSE("GPL"); |