| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * drivers/net/phy/smsc.c |
| * |
| * Driver for SMSC PHYs |
| * |
| * Author: Herbert Valerio Riedel |
| * |
| * Copyright (c) 2006 Herbert Valerio Riedel <hvr@gnu.org> |
| * |
| * Support added for SMSC LAN8187 and LAN8700 by steve.glendinning@shawell.net |
| * |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/mii.h> |
| #include <linux/ethtool.h> |
| #include <linux/of.h> |
| #include <linux/phy.h> |
| #include <linux/netdevice.h> |
| #include <linux/smscphy.h> |
| |
| struct smsc_hw_stat { |
| const char *string; |
| u8 reg; |
| u8 bits; |
| }; |
| |
| static struct smsc_hw_stat smsc_hw_stats[] = { |
| { "phy_symbol_errors", 26, 16}, |
| }; |
| |
| struct smsc_phy_priv { |
| bool energy_enable; |
| }; |
| |
| static int smsc_phy_config_intr(struct phy_device *phydev) |
| { |
| int rc = phy_write (phydev, MII_LAN83C185_IM, |
| ((PHY_INTERRUPT_ENABLED == phydev->interrupts) |
| ? MII_LAN83C185_ISF_INT_PHYLIB_EVENTS |
| : 0)); |
| |
| return rc < 0 ? rc : 0; |
| } |
| |
| static int smsc_phy_ack_interrupt(struct phy_device *phydev) |
| { |
| int rc = phy_read (phydev, MII_LAN83C185_ISF); |
| |
| return rc < 0 ? rc : 0; |
| } |
| |
| static int smsc_phy_config_init(struct phy_device *phydev) |
| { |
| struct smsc_phy_priv *priv = phydev->priv; |
| |
| int rc = phy_read(phydev, MII_LAN83C185_CTRL_STATUS); |
| |
| if (rc < 0) |
| return rc; |
| |
| if (priv->energy_enable) { |
| /* Enable energy detect mode for this SMSC Transceivers */ |
| rc = phy_write(phydev, MII_LAN83C185_CTRL_STATUS, |
| rc | MII_LAN83C185_EDPWRDOWN); |
| if (rc < 0) |
| return rc; |
| } |
| |
| return smsc_phy_ack_interrupt(phydev); |
| } |
| |
| static int smsc_phy_reset(struct phy_device *phydev) |
| { |
| int rc = phy_read(phydev, MII_LAN83C185_SPECIAL_MODES); |
| if (rc < 0) |
| return rc; |
| |
| /* If the SMSC PHY is in power down mode, then set it |
| * in all capable mode before using it. |
| */ |
| if ((rc & MII_LAN83C185_MODE_MASK) == MII_LAN83C185_MODE_POWERDOWN) { |
| /* set "all capable" mode */ |
| rc |= MII_LAN83C185_MODE_ALL; |
| phy_write(phydev, MII_LAN83C185_SPECIAL_MODES, rc); |
| } |
| |
| /* reset the phy */ |
| return genphy_soft_reset(phydev); |
| } |
| |
| static int lan911x_config_init(struct phy_device *phydev) |
| { |
| return smsc_phy_ack_interrupt(phydev); |
| } |
| |
| /* |
| * The LAN87xx suffers from rare absence of the ENERGYON-bit when Ethernet cable |
| * plugs in while LAN87xx is in Energy Detect Power-Down mode. This leads to |
| * unstable detection of plugging in Ethernet cable. |
| * This workaround disables Energy Detect Power-Down mode and waiting for |
| * response on link pulses to detect presence of plugged Ethernet cable. |
| * The Energy Detect Power-Down mode is enabled again in the end of procedure to |
| * save approximately 220 mW of power if cable is unplugged. |
| */ |
| static int lan87xx_read_status(struct phy_device *phydev) |
| { |
| struct smsc_phy_priv *priv = phydev->priv; |
| |
| int err = genphy_read_status(phydev); |
| |
| if (!phydev->link && priv->energy_enable) { |
| int i; |
| |
| /* Disable EDPD to wake up PHY */ |
| int rc = phy_read(phydev, MII_LAN83C185_CTRL_STATUS); |
| if (rc < 0) |
| return rc; |
| |
| rc = phy_write(phydev, MII_LAN83C185_CTRL_STATUS, |
| rc & ~MII_LAN83C185_EDPWRDOWN); |
| if (rc < 0) |
| return rc; |
| |
| /* Wait max 640 ms to detect energy */ |
| for (i = 0; i < 64; i++) { |
| /* Sleep to allow link test pulses to be sent */ |
| msleep(10); |
| rc = phy_read(phydev, MII_LAN83C185_CTRL_STATUS); |
| if (rc < 0) |
| return rc; |
| if (rc & MII_LAN83C185_ENERGYON) |
| break; |
| } |
| |
| /* Re-enable EDPD */ |
| rc = phy_read(phydev, MII_LAN83C185_CTRL_STATUS); |
| if (rc < 0) |
| return rc; |
| |
| rc = phy_write(phydev, MII_LAN83C185_CTRL_STATUS, |
| rc | MII_LAN83C185_EDPWRDOWN); |
| if (rc < 0) |
| return rc; |
| } |
| |
| return err; |
| } |
| |
| static int smsc_get_sset_count(struct phy_device *phydev) |
| { |
| return ARRAY_SIZE(smsc_hw_stats); |
| } |
| |
| static void smsc_get_strings(struct phy_device *phydev, u8 *data) |
| { |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(smsc_hw_stats); i++) { |
| strncpy(data + i * ETH_GSTRING_LEN, |
| smsc_hw_stats[i].string, ETH_GSTRING_LEN); |
| } |
| } |
| |
| static u64 smsc_get_stat(struct phy_device *phydev, int i) |
| { |
| struct smsc_hw_stat stat = smsc_hw_stats[i]; |
| int val; |
| u64 ret; |
| |
| val = phy_read(phydev, stat.reg); |
| if (val < 0) |
| ret = U64_MAX; |
| else |
| ret = val; |
| |
| return ret; |
| } |
| |
| static void smsc_get_stats(struct phy_device *phydev, |
| struct ethtool_stats *stats, u64 *data) |
| { |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(smsc_hw_stats); i++) |
| data[i] = smsc_get_stat(phydev, i); |
| } |
| |
| static int smsc_phy_probe(struct phy_device *phydev) |
| { |
| struct device *dev = &phydev->mdio.dev; |
| struct device_node *of_node = dev->of_node; |
| struct smsc_phy_priv *priv; |
| |
| priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); |
| if (!priv) |
| return -ENOMEM; |
| |
| priv->energy_enable = true; |
| |
| if (of_property_read_bool(of_node, "smsc,disable-energy-detect")) |
| priv->energy_enable = false; |
| |
| phydev->priv = priv; |
| |
| return 0; |
| } |
| |
| static struct phy_driver smsc_phy_driver[] = { |
| { |
| .phy_id = 0x0007c0a0, /* OUI=0x00800f, Model#=0x0a */ |
| .phy_id_mask = 0xfffffff0, |
| .name = "SMSC LAN83C185", |
| |
| /* PHY_BASIC_FEATURES */ |
| |
| .probe = smsc_phy_probe, |
| |
| /* basic functions */ |
| .config_init = smsc_phy_config_init, |
| .soft_reset = smsc_phy_reset, |
| |
| /* IRQ related */ |
| .ack_interrupt = smsc_phy_ack_interrupt, |
| .config_intr = smsc_phy_config_intr, |
| |
| .suspend = genphy_suspend, |
| .resume = genphy_resume, |
| }, { |
| .phy_id = 0x0007c0b0, /* OUI=0x00800f, Model#=0x0b */ |
| .phy_id_mask = 0xfffffff0, |
| .name = "SMSC LAN8187", |
| |
| /* PHY_BASIC_FEATURES */ |
| |
| .probe = smsc_phy_probe, |
| |
| /* basic functions */ |
| .config_init = smsc_phy_config_init, |
| .soft_reset = smsc_phy_reset, |
| |
| /* IRQ related */ |
| .ack_interrupt = smsc_phy_ack_interrupt, |
| .config_intr = smsc_phy_config_intr, |
| |
| /* Statistics */ |
| .get_sset_count = smsc_get_sset_count, |
| .get_strings = smsc_get_strings, |
| .get_stats = smsc_get_stats, |
| |
| .suspend = genphy_suspend, |
| .resume = genphy_resume, |
| }, { |
| .phy_id = 0x0007c0c0, /* OUI=0x00800f, Model#=0x0c */ |
| .phy_id_mask = 0xfffffff0, |
| .name = "SMSC LAN8700", |
| |
| /* PHY_BASIC_FEATURES */ |
| |
| .probe = smsc_phy_probe, |
| |
| /* basic functions */ |
| .read_status = lan87xx_read_status, |
| .config_init = smsc_phy_config_init, |
| .soft_reset = smsc_phy_reset, |
| |
| /* IRQ related */ |
| .ack_interrupt = smsc_phy_ack_interrupt, |
| .config_intr = smsc_phy_config_intr, |
| |
| /* Statistics */ |
| .get_sset_count = smsc_get_sset_count, |
| .get_strings = smsc_get_strings, |
| .get_stats = smsc_get_stats, |
| |
| .suspend = genphy_suspend, |
| .resume = genphy_resume, |
| }, { |
| .phy_id = 0x0007c0d0, /* OUI=0x00800f, Model#=0x0d */ |
| .phy_id_mask = 0xfffffff0, |
| .name = "SMSC LAN911x Internal PHY", |
| |
| /* PHY_BASIC_FEATURES */ |
| |
| .probe = smsc_phy_probe, |
| |
| /* basic functions */ |
| .config_init = lan911x_config_init, |
| |
| /* IRQ related */ |
| .ack_interrupt = smsc_phy_ack_interrupt, |
| .config_intr = smsc_phy_config_intr, |
| |
| .suspend = genphy_suspend, |
| .resume = genphy_resume, |
| }, { |
| .phy_id = 0x0007c0f0, /* OUI=0x00800f, Model#=0x0f */ |
| .phy_id_mask = 0xfffffff0, |
| .name = "SMSC LAN8710/LAN8720", |
| |
| /* PHY_BASIC_FEATURES */ |
| .flags = PHY_RST_AFTER_CLK_EN, |
| |
| .probe = smsc_phy_probe, |
| |
| /* basic functions */ |
| .read_status = lan87xx_read_status, |
| .config_init = smsc_phy_config_init, |
| .soft_reset = smsc_phy_reset, |
| |
| /* IRQ related */ |
| .ack_interrupt = smsc_phy_ack_interrupt, |
| .config_intr = smsc_phy_config_intr, |
| |
| /* Statistics */ |
| .get_sset_count = smsc_get_sset_count, |
| .get_strings = smsc_get_strings, |
| .get_stats = smsc_get_stats, |
| |
| .suspend = genphy_suspend, |
| .resume = genphy_resume, |
| }, { |
| .phy_id = 0x0007c110, |
| .phy_id_mask = 0xfffffff0, |
| .name = "SMSC LAN8740", |
| |
| /* PHY_BASIC_FEATURES */ |
| |
| .probe = smsc_phy_probe, |
| |
| /* basic functions */ |
| .read_status = lan87xx_read_status, |
| .config_init = smsc_phy_config_init, |
| .soft_reset = smsc_phy_reset, |
| |
| /* IRQ related */ |
| .ack_interrupt = smsc_phy_ack_interrupt, |
| .config_intr = smsc_phy_config_intr, |
| |
| /* Statistics */ |
| .get_sset_count = smsc_get_sset_count, |
| .get_strings = smsc_get_strings, |
| .get_stats = smsc_get_stats, |
| |
| .suspend = genphy_suspend, |
| .resume = genphy_resume, |
| } }; |
| |
| module_phy_driver(smsc_phy_driver); |
| |
| MODULE_DESCRIPTION("SMSC PHY driver"); |
| MODULE_AUTHOR("Herbert Valerio Riedel"); |
| MODULE_LICENSE("GPL"); |
| |
| static struct mdio_device_id __maybe_unused smsc_tbl[] = { |
| { 0x0007c0a0, 0xfffffff0 }, |
| { 0x0007c0b0, 0xfffffff0 }, |
| { 0x0007c0c0, 0xfffffff0 }, |
| { 0x0007c0d0, 0xfffffff0 }, |
| { 0x0007c0f0, 0xfffffff0 }, |
| { 0x0007c110, 0xfffffff0 }, |
| { } |
| }; |
| |
| MODULE_DEVICE_TABLE(mdio, smsc_tbl); |