| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Copyright (c) 2022 Amlogic, Inc. All rights reserved. |
| */ |
| |
| #include <linux/err.h> |
| #include <linux/io.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/perf_event.h> |
| #include <linux/platform_device.h> |
| #include <linux/printk.h> |
| #include <linux/types.h> |
| |
| #include <soc/amlogic/meson_ddr_pmu.h> |
| |
| #define PORT_MAJOR 32 |
| #define DEFAULT_XTAL_FREQ 24000000UL |
| |
| #define DMC_QOS_IRQ BIT(30) |
| |
| /* DMC bandwidth monitor register address offset */ |
| #define DMC_MON_G12_CTRL0 (0x0 << 2) |
| #define DMC_MON_G12_CTRL1 (0x1 << 2) |
| #define DMC_MON_G12_CTRL2 (0x2 << 2) |
| #define DMC_MON_G12_CTRL3 (0x3 << 2) |
| #define DMC_MON_G12_CTRL4 (0x4 << 2) |
| #define DMC_MON_G12_CTRL5 (0x5 << 2) |
| #define DMC_MON_G12_CTRL6 (0x6 << 2) |
| #define DMC_MON_G12_CTRL7 (0x7 << 2) |
| #define DMC_MON_G12_CTRL8 (0x8 << 2) |
| |
| #define DMC_MON_G12_ALL_REQ_CNT (0x9 << 2) |
| #define DMC_MON_G12_ALL_GRANT_CNT (0xa << 2) |
| #define DMC_MON_G12_ONE_GRANT_CNT (0xb << 2) |
| #define DMC_MON_G12_SEC_GRANT_CNT (0xc << 2) |
| #define DMC_MON_G12_THD_GRANT_CNT (0xd << 2) |
| #define DMC_MON_G12_FOR_GRANT_CNT (0xe << 2) |
| #define DMC_MON_G12_TIMER (0xf << 2) |
| |
| /* Each bit represent a axi line */ |
| PMU_FORMAT_ATTR(event, "config:0-7"); |
| PMU_FORMAT_ATTR(arm, "config1:0"); |
| PMU_FORMAT_ATTR(gpu, "config1:1"); |
| PMU_FORMAT_ATTR(pcie, "config1:2"); |
| PMU_FORMAT_ATTR(hdcp, "config1:3"); |
| PMU_FORMAT_ATTR(hevc_front, "config1:4"); |
| PMU_FORMAT_ATTR(usb3_0, "config1:6"); |
| PMU_FORMAT_ATTR(device, "config1:7"); |
| PMU_FORMAT_ATTR(hevc_back, "config1:8"); |
| PMU_FORMAT_ATTR(h265enc, "config1:9"); |
| PMU_FORMAT_ATTR(vpu_read1, "config1:16"); |
| PMU_FORMAT_ATTR(vpu_read2, "config1:17"); |
| PMU_FORMAT_ATTR(vpu_read3, "config1:18"); |
| PMU_FORMAT_ATTR(vpu_write1, "config1:19"); |
| PMU_FORMAT_ATTR(vpu_write2, "config1:20"); |
| PMU_FORMAT_ATTR(vdec, "config1:21"); |
| PMU_FORMAT_ATTR(hcodec, "config1:22"); |
| PMU_FORMAT_ATTR(ge2d, "config1:23"); |
| |
| PMU_FORMAT_ATTR(spicc1, "config1:32"); |
| PMU_FORMAT_ATTR(usb0, "config1:33"); |
| PMU_FORMAT_ATTR(dma, "config1:34"); |
| PMU_FORMAT_ATTR(arb0, "config1:35"); |
| PMU_FORMAT_ATTR(sd_emmc_b, "config1:36"); |
| PMU_FORMAT_ATTR(usb1, "config1:37"); |
| PMU_FORMAT_ATTR(audio, "config1:38"); |
| PMU_FORMAT_ATTR(aififo, "config1:39"); |
| PMU_FORMAT_ATTR(parser, "config1:41"); |
| PMU_FORMAT_ATTR(ao_cpu, "config1:42"); |
| PMU_FORMAT_ATTR(sd_emmc_c, "config1:43"); |
| PMU_FORMAT_ATTR(spicc2, "config1:44"); |
| PMU_FORMAT_ATTR(ethernet, "config1:45"); |
| PMU_FORMAT_ATTR(sana, "config1:46"); |
| |
| /* for sm1 and g12b */ |
| PMU_FORMAT_ATTR(nna, "config1:10"); |
| |
| /* for g12b only */ |
| PMU_FORMAT_ATTR(gdc, "config1:11"); |
| PMU_FORMAT_ATTR(mipi_isp, "config1:12"); |
| PMU_FORMAT_ATTR(arm1, "config1:13"); |
| PMU_FORMAT_ATTR(sd_emmc_a, "config1:40"); |
| |
| static struct attribute *g12_pmu_format_attrs[] = { |
| &format_attr_event.attr, |
| &format_attr_arm.attr, |
| &format_attr_gpu.attr, |
| &format_attr_nna.attr, |
| &format_attr_gdc.attr, |
| &format_attr_arm1.attr, |
| &format_attr_mipi_isp.attr, |
| &format_attr_sd_emmc_a.attr, |
| &format_attr_pcie.attr, |
| &format_attr_hdcp.attr, |
| &format_attr_hevc_front.attr, |
| &format_attr_usb3_0.attr, |
| &format_attr_device.attr, |
| &format_attr_hevc_back.attr, |
| &format_attr_h265enc.attr, |
| &format_attr_vpu_read1.attr, |
| &format_attr_vpu_read2.attr, |
| &format_attr_vpu_read3.attr, |
| &format_attr_vpu_write1.attr, |
| &format_attr_vpu_write2.attr, |
| &format_attr_vdec.attr, |
| &format_attr_hcodec.attr, |
| &format_attr_ge2d.attr, |
| &format_attr_spicc1.attr, |
| &format_attr_usb0.attr, |
| &format_attr_dma.attr, |
| &format_attr_arb0.attr, |
| &format_attr_sd_emmc_b.attr, |
| &format_attr_usb1.attr, |
| &format_attr_audio.attr, |
| &format_attr_aififo.attr, |
| &format_attr_parser.attr, |
| &format_attr_ao_cpu.attr, |
| &format_attr_sd_emmc_c.attr, |
| &format_attr_spicc2.attr, |
| &format_attr_ethernet.attr, |
| &format_attr_sana.attr, |
| NULL, |
| }; |
| |
| /* calculate ddr clock */ |
| static unsigned long dmc_g12_get_freq_quick(struct dmc_info *info) |
| { |
| unsigned int val; |
| unsigned int n, m, od1; |
| unsigned int od_div = 0xfff; |
| unsigned long freq = 0; |
| |
| val = readl(info->pll_reg); |
| val = val & 0xfffff; |
| switch ((val >> 16) & 7) { |
| case 0: |
| od_div = 2; |
| break; |
| |
| case 1: |
| od_div = 3; |
| break; |
| |
| case 2: |
| od_div = 4; |
| break; |
| |
| case 3: |
| od_div = 6; |
| break; |
| |
| case 4: |
| od_div = 8; |
| break; |
| |
| default: |
| break; |
| } |
| |
| m = val & 0x1ff; |
| n = ((val >> 10) & 0x1f); |
| od1 = (((val >> 19) & 0x1)) == 1 ? 2 : 1; |
| freq = DEFAULT_XTAL_FREQ / 1000; /* avoid overflow */ |
| if (n) |
| freq = ((((freq * m) / n) >> od1) / od_div) * 1000; |
| |
| return freq; |
| } |
| |
| #ifdef DEBUG |
| static void g12_dump_reg(struct dmc_info *db) |
| { |
| int s = 0, i; |
| unsigned int r; |
| |
| for (i = 0; i < 9; i++) { |
| r = readl(db->ddr_reg[0] + (DMC_MON_G12_CTRL0 + (i << 2))); |
| pr_notice("DMC_MON_CTRL%d: %08x\n", i, r); |
| } |
| r = readl(db->ddr_reg[0] + DMC_MON_G12_ALL_REQ_CNT); |
| pr_notice("DMC_MON_ALL_REQ_CNT: %08x\n", r); |
| r = readl(db->ddr_reg[0] + DMC_MON_G12_ALL_GRANT_CNT); |
| pr_notice("DMC_MON_ALL_GRANT_CNT:%08x\n", r); |
| r = readl(db->ddr_reg[0] + DMC_MON_G12_ONE_GRANT_CNT); |
| pr_notice("DMC_MON_ONE_GRANT_CNT:%08x\n", r); |
| r = readl(db->ddr_reg[0] + DMC_MON_G12_SEC_GRANT_CNT); |
| pr_notice("DMC_MON_SEC_GRANT_CNT:%08x\n", r); |
| r = readl(db->ddr_reg[0] + DMC_MON_G12_THD_GRANT_CNT); |
| pr_notice("DMC_MON_THD_GRANT_CNT:%08x\n", r); |
| r = readl(db->ddr_reg[0] + DMC_MON_G12_FOR_GRANT_CNT); |
| pr_notice("DMC_MON_FOR_GRANT_CNT:%08x\n", r); |
| r = readl(db->ddr_reg[0] + DMC_MON_G12_TIMER); |
| pr_notice("DMC_MON_TIMER: %08x\n", r); |
| } |
| #endif |
| |
| static void dmc_g12_counter_enable(struct dmc_info *info) |
| { |
| unsigned int val; |
| unsigned long clock_count = dmc_g12_get_freq_quick(info) / 10; /* 100ms */ |
| |
| writel(clock_count, info->ddr_reg[0] + DMC_MON_G12_TIMER); |
| |
| val = readl(info->ddr_reg[0] + DMC_MON_G12_CTRL0); |
| |
| /* enable all channel */ |
| val = BIT(31) | /* enable bit */ |
| BIT(20) | /* use timer */ |
| 0x0f; /* 4 channels */ |
| |
| writel(val, info->ddr_reg[0] + DMC_MON_G12_CTRL0); |
| |
| #ifdef DEBUG |
| g12_dump_reg(info); |
| #endif |
| } |
| |
| static void dmc_g12_config_fiter(struct dmc_info *info, |
| int port, int channel) |
| { |
| u32 val; |
| u32 rp[MAX_CHANNEL_NUM] = {DMC_MON_G12_CTRL1, DMC_MON_G12_CTRL3, |
| DMC_MON_G12_CTRL5, DMC_MON_G12_CTRL7}; |
| u32 rs[MAX_CHANNEL_NUM] = {DMC_MON_G12_CTRL2, DMC_MON_G12_CTRL4, |
| DMC_MON_G12_CTRL6, DMC_MON_G12_CTRL8}; |
| int subport = -1; |
| |
| /* clear all port mask */ |
| if (port < 0) { |
| writel(0, info->ddr_reg[0] + rp[channel]); |
| writel(0, info->ddr_reg[0] + rs[channel]); |
| return; |
| } |
| |
| if (port >= PORT_MAJOR) |
| subport = port - PORT_MAJOR; |
| |
| if (subport < 0) { |
| val = readl(info->ddr_reg[0] + rp[channel]); |
| val |= (1 << port); |
| writel(val, info->ddr_reg[0] + rp[channel]); |
| val = 0xffff; |
| writel(val, info->ddr_reg[0] + rs[channel]); |
| } else { |
| val = BIT(23); /* select device */ |
| writel(val, info->ddr_reg[0] + rp[channel]); |
| val = readl(info->ddr_reg[0] + rs[channel]); |
| val |= (1 << subport); |
| writel(val, info->ddr_reg[0] + rs[channel]); |
| } |
| } |
| |
| static void dmc_g12_set_axi_filter(struct dmc_info *info, int axi_id, int channel) |
| { |
| if (channel > info->hw_info->chann_nr) |
| return; |
| |
| dmc_g12_config_fiter(info, axi_id, channel); |
| } |
| |
| static void dmc_g12_counter_disable(struct dmc_info *info) |
| { |
| int i; |
| |
| /* clear timer */ |
| writel(0, info->ddr_reg[0] + DMC_MON_G12_CTRL0); |
| writel(0, info->ddr_reg[0] + DMC_MON_G12_TIMER); |
| |
| writel(0, info->ddr_reg[0] + DMC_MON_G12_ALL_REQ_CNT); |
| writel(0, info->ddr_reg[0] + DMC_MON_G12_ALL_GRANT_CNT); |
| writel(0, info->ddr_reg[0] + DMC_MON_G12_ONE_GRANT_CNT); |
| writel(0, info->ddr_reg[0] + DMC_MON_G12_SEC_GRANT_CNT); |
| writel(0, info->ddr_reg[0] + DMC_MON_G12_THD_GRANT_CNT); |
| writel(0, info->ddr_reg[0] + DMC_MON_G12_FOR_GRANT_CNT); |
| |
| /* clear port channel mapping */ |
| for (i = 0; i < info->hw_info->chann_nr; i++) |
| dmc_g12_config_fiter(info, -1, i); |
| } |
| |
| static void dmc_g12_get_counters(struct dmc_info *info, |
| struct dmc_counter *counter) |
| { |
| int i; |
| unsigned int reg; |
| |
| counter->all_cnt = readl(info->ddr_reg[0] + DMC_MON_G12_ALL_GRANT_CNT); |
| counter->all_req = readl(info->ddr_reg[0] + DMC_MON_G12_ALL_REQ_CNT); |
| |
| for (i = 0; i < info->hw_info->chann_nr; i++) { |
| reg = DMC_MON_G12_ONE_GRANT_CNT + (i << 2); |
| counter->channel_cnt[i] = readl(info->ddr_reg[0] + reg); |
| } |
| } |
| |
| static int dmc_g12_irq_handler(struct dmc_info *info, |
| struct dmc_counter *counter) |
| { |
| unsigned int val; |
| int ret = -EINVAL; |
| |
| val = readl(info->ddr_reg[0] + DMC_MON_G12_CTRL0); |
| if (val & DMC_QOS_IRQ) { |
| dmc_g12_get_counters(info, counter); |
| /* clear irq flags */ |
| writel(val, info->ddr_reg[0] + DMC_MON_G12_CTRL0); |
| ret = 0; |
| } |
| return ret; |
| } |
| |
| static const struct dmc_hw_info g12a_dmc_info = { |
| .enable = dmc_g12_counter_enable, |
| .disable = dmc_g12_counter_disable, |
| .irq_handler = dmc_g12_irq_handler, |
| .get_counters = dmc_g12_get_counters, |
| .set_axi_filter = dmc_g12_set_axi_filter, |
| |
| .dmc_nr = 1, |
| .chann_nr = 4, |
| .capability = {0X7EFF00FF03DF, 0}, |
| .fmt_attr = g12_pmu_format_attrs, |
| }; |
| |
| static const struct dmc_hw_info g12b_dmc_info = { |
| .enable = dmc_g12_counter_enable, |
| .disable = dmc_g12_counter_disable, |
| .irq_handler = dmc_g12_irq_handler, |
| .get_counters = dmc_g12_get_counters, |
| .set_axi_filter = dmc_g12_set_axi_filter, |
| |
| .dmc_nr = 1, |
| .chann_nr = 4, |
| .capability = {0X7FFF00FF3FDF, 0}, |
| .fmt_attr = g12_pmu_format_attrs, |
| }; |
| |
| static const struct dmc_hw_info sm1_dmc_info = { |
| .enable = dmc_g12_counter_enable, |
| .disable = dmc_g12_counter_disable, |
| .irq_handler = dmc_g12_irq_handler, |
| .get_counters = dmc_g12_get_counters, |
| .set_axi_filter = dmc_g12_set_axi_filter, |
| |
| .dmc_nr = 1, |
| .chann_nr = 4, |
| .capability = {0X7EFF00FF07DF, 0}, |
| .fmt_attr = g12_pmu_format_attrs, |
| }; |
| |
| static int g12_ddr_pmu_probe(struct platform_device *pdev) |
| { |
| return meson_ddr_pmu_create(pdev); |
| } |
| |
| static int g12_ddr_pmu_remove(struct platform_device *pdev) |
| { |
| meson_ddr_pmu_remove(pdev); |
| |
| return 0; |
| } |
| |
| static const struct of_device_id meson_ddr_pmu_dt_match[] = { |
| { |
| .compatible = "amlogic,g12a-ddr-pmu", |
| .data = &g12a_dmc_info, |
| }, |
| { |
| .compatible = "amlogic,g12b-ddr-pmu", |
| .data = &g12b_dmc_info, |
| }, |
| { |
| .compatible = "amlogic,sm1-ddr-pmu", |
| .data = &sm1_dmc_info, |
| }, |
| {} |
| }; |
| |
| static struct platform_driver g12_ddr_pmu_driver = { |
| .probe = g12_ddr_pmu_probe, |
| .remove = g12_ddr_pmu_remove, |
| |
| .driver = { |
| .name = "meson-g12-ddr-pmu", |
| .of_match_table = meson_ddr_pmu_dt_match, |
| }, |
| }; |
| |
| module_platform_driver(g12_ddr_pmu_driver); |
| MODULE_AUTHOR("Jiucheng Xu"); |
| MODULE_LICENSE("GPL"); |
| MODULE_DESCRIPTION("Amlogic G12 series SoC DDR PMU"); |