| // SPDX-License-Identifier: GPL-2.0 |
| |
| #include <stdint.h> |
| #include "resctrl.h" |
| |
| struct read_format { |
| __u64 nr; /* The number of events */ |
| struct { |
| __u64 value; /* The value of the event */ |
| } values[2]; |
| }; |
| |
| static struct perf_event_attr pea_llc_miss; |
| static struct read_format rf_cqm; |
| static int fd_lm; |
| char llc_occup_path[1024]; |
| |
| static void initialize_perf_event_attr(void) |
| { |
| pea_llc_miss.type = PERF_TYPE_HARDWARE; |
| pea_llc_miss.size = sizeof(struct perf_event_attr); |
| pea_llc_miss.read_format = PERF_FORMAT_GROUP; |
| pea_llc_miss.exclude_kernel = 1; |
| pea_llc_miss.exclude_hv = 1; |
| pea_llc_miss.exclude_idle = 1; |
| pea_llc_miss.exclude_callchain_kernel = 1; |
| pea_llc_miss.inherit = 1; |
| pea_llc_miss.exclude_guest = 1; |
| pea_llc_miss.disabled = 1; |
| } |
| |
| static void ioctl_perf_event_ioc_reset_enable(void) |
| { |
| ioctl(fd_lm, PERF_EVENT_IOC_RESET, 0); |
| ioctl(fd_lm, PERF_EVENT_IOC_ENABLE, 0); |
| } |
| |
| static int perf_event_open_llc_miss(pid_t pid, int cpu_no) |
| { |
| fd_lm = perf_event_open(&pea_llc_miss, pid, cpu_no, -1, |
| PERF_FLAG_FD_CLOEXEC); |
| if (fd_lm == -1) { |
| perror("Error opening leader"); |
| ctrlc_handler(0, NULL, NULL); |
| return -1; |
| } |
| |
| return 0; |
| } |
| |
| static void initialize_llc_perf(void) |
| { |
| memset(&pea_llc_miss, 0, sizeof(struct perf_event_attr)); |
| memset(&rf_cqm, 0, sizeof(struct read_format)); |
| |
| /* Initialize perf_event_attr structures for HW_CACHE_MISSES */ |
| initialize_perf_event_attr(); |
| |
| pea_llc_miss.config = PERF_COUNT_HW_CACHE_MISSES; |
| |
| rf_cqm.nr = 1; |
| } |
| |
| static int reset_enable_llc_perf(pid_t pid, int cpu_no) |
| { |
| int ret = 0; |
| |
| ret = perf_event_open_llc_miss(pid, cpu_no); |
| if (ret < 0) |
| return ret; |
| |
| /* Start counters to log values */ |
| ioctl_perf_event_ioc_reset_enable(); |
| |
| return 0; |
| } |
| |
| /* |
| * get_llc_perf: llc cache miss through perf events |
| * @llc_perf_miss: LLC miss counter that is filled on success |
| * |
| * Perf events like HW_CACHE_MISSES could be used to validate number of |
| * cache lines allocated. |
| * |
| * Return: =0 on success. <0 on failure. |
| */ |
| static int get_llc_perf(unsigned long *llc_perf_miss) |
| { |
| __u64 total_misses; |
| |
| /* Stop counters after one span to get miss rate */ |
| |
| ioctl(fd_lm, PERF_EVENT_IOC_DISABLE, 0); |
| |
| if (read(fd_lm, &rf_cqm, sizeof(struct read_format)) == -1) { |
| perror("Could not get llc misses through perf"); |
| |
| return -1; |
| } |
| |
| total_misses = rf_cqm.values[0].value; |
| |
| close(fd_lm); |
| |
| *llc_perf_miss = total_misses; |
| |
| return 0; |
| } |
| |
| /* |
| * Get LLC Occupancy as reported by RESCTRL FS |
| * For CMT, |
| * 1. If con_mon grp and mon grp given, then read from mon grp in |
| * con_mon grp |
| * 2. If only con_mon grp given, then read from con_mon grp |
| * 3. If both not given, then read from root con_mon grp |
| * For CAT, |
| * 1. If con_mon grp given, then read from it |
| * 2. If con_mon grp not given, then read from root con_mon grp |
| * |
| * Return: =0 on success. <0 on failure. |
| */ |
| static int get_llc_occu_resctrl(unsigned long *llc_occupancy) |
| { |
| FILE *fp; |
| |
| fp = fopen(llc_occup_path, "r"); |
| if (!fp) { |
| perror("Failed to open results file"); |
| |
| return errno; |
| } |
| if (fscanf(fp, "%lu", llc_occupancy) <= 0) { |
| perror("Could not get llc occupancy"); |
| fclose(fp); |
| |
| return -1; |
| } |
| fclose(fp); |
| |
| return 0; |
| } |
| |
| /* |
| * print_results_cache: the cache results are stored in a file |
| * @filename: file that stores the results |
| * @bm_pid: child pid that runs benchmark |
| * @llc_value: perf miss value / |
| * llc occupancy value reported by resctrl FS |
| * |
| * Return: 0 on success. non-zero on failure. |
| */ |
| static int print_results_cache(char *filename, int bm_pid, |
| unsigned long llc_value) |
| { |
| FILE *fp; |
| |
| if (strcmp(filename, "stdio") == 0 || strcmp(filename, "stderr") == 0) { |
| printf("Pid: %d \t LLC_value: %lu\n", bm_pid, |
| llc_value); |
| } else { |
| fp = fopen(filename, "a"); |
| if (!fp) { |
| perror("Cannot open results file"); |
| |
| return errno; |
| } |
| fprintf(fp, "Pid: %d \t llc_value: %lu\n", bm_pid, llc_value); |
| fclose(fp); |
| } |
| |
| return 0; |
| } |
| |
| int measure_cache_vals(struct resctrl_val_param *param, int bm_pid) |
| { |
| unsigned long llc_perf_miss = 0, llc_occu_resc = 0, llc_value = 0; |
| int ret; |
| |
| /* |
| * Measure cache miss from perf. |
| */ |
| if (!strncmp(param->resctrl_val, CAT_STR, sizeof(CAT_STR))) { |
| ret = get_llc_perf(&llc_perf_miss); |
| if (ret < 0) |
| return ret; |
| llc_value = llc_perf_miss; |
| } |
| |
| /* |
| * Measure llc occupancy from resctrl. |
| */ |
| if (!strncmp(param->resctrl_val, CMT_STR, sizeof(CMT_STR))) { |
| ret = get_llc_occu_resctrl(&llc_occu_resc); |
| if (ret < 0) |
| return ret; |
| llc_value = llc_occu_resc; |
| } |
| ret = print_results_cache(param->filename, bm_pid, llc_value); |
| if (ret) |
| return ret; |
| |
| return 0; |
| } |
| |
| /* |
| * cache_val: execute benchmark and measure LLC occupancy resctrl |
| * and perf cache miss for the benchmark |
| * @param: parameters passed to cache_val() |
| * |
| * Return: 0 on success. non-zero on failure. |
| */ |
| int cat_val(struct resctrl_val_param *param) |
| { |
| int malloc_and_init_memory = 1, memflush = 1, operation = 0, ret = 0; |
| char *resctrl_val = param->resctrl_val; |
| pid_t bm_pid; |
| |
| if (strcmp(param->filename, "") == 0) |
| sprintf(param->filename, "stdio"); |
| |
| bm_pid = getpid(); |
| |
| /* Taskset benchmark to specified cpu */ |
| ret = taskset_benchmark(bm_pid, param->cpu_no); |
| if (ret) |
| return ret; |
| |
| /* Write benchmark to specified con_mon grp, mon_grp in resctrl FS*/ |
| ret = write_bm_pid_to_resctrl(bm_pid, param->ctrlgrp, param->mongrp, |
| resctrl_val); |
| if (ret) |
| return ret; |
| |
| if (!strncmp(resctrl_val, CAT_STR, sizeof(CAT_STR))) |
| initialize_llc_perf(); |
| |
| /* Test runs until the callback setup() tells the test to stop. */ |
| while (1) { |
| if (!strncmp(resctrl_val, CAT_STR, sizeof(CAT_STR))) { |
| ret = param->setup(1, param); |
| if (ret == END_OF_TESTS) { |
| ret = 0; |
| break; |
| } |
| if (ret < 0) |
| break; |
| ret = reset_enable_llc_perf(bm_pid, param->cpu_no); |
| if (ret) |
| break; |
| |
| if (run_fill_buf(param->span, malloc_and_init_memory, |
| memflush, operation, resctrl_val)) { |
| fprintf(stderr, "Error-running fill buffer\n"); |
| ret = -1; |
| break; |
| } |
| |
| sleep(1); |
| ret = measure_cache_vals(param, bm_pid); |
| if (ret) |
| break; |
| } else { |
| break; |
| } |
| } |
| |
| return ret; |
| } |
| |
| /* |
| * show_cache_info: show cache test result information |
| * @sum_llc_val: sum of LLC cache result data |
| * @no_of_bits: number of bits |
| * @cache_span: cache span in bytes for CMT or in lines for CAT |
| * @max_diff: max difference |
| * @max_diff_percent: max difference percentage |
| * @num_of_runs: number of runs |
| * @platform: show test information on this platform |
| * @cmt: CMT test or CAT test |
| * |
| * Return: 0 on success. non-zero on failure. |
| */ |
| int show_cache_info(unsigned long sum_llc_val, int no_of_bits, |
| unsigned long cache_span, unsigned long max_diff, |
| unsigned long max_diff_percent, unsigned long num_of_runs, |
| bool platform, bool cmt) |
| { |
| unsigned long avg_llc_val = 0; |
| float diff_percent; |
| long avg_diff = 0; |
| int ret; |
| |
| avg_llc_val = sum_llc_val / (num_of_runs - 1); |
| avg_diff = (long)abs(cache_span - avg_llc_val); |
| diff_percent = ((float)cache_span - avg_llc_val) / cache_span * 100; |
| |
| ret = platform && abs((int)diff_percent) > max_diff_percent && |
| (cmt ? (abs(avg_diff) > max_diff) : true); |
| |
| ksft_print_msg("%s Check cache miss rate within %d%%\n", |
| ret ? "Fail:" : "Pass:", max_diff_percent); |
| |
| ksft_print_msg("Percent diff=%d\n", abs((int)diff_percent)); |
| ksft_print_msg("Number of bits: %d\n", no_of_bits); |
| ksft_print_msg("Average LLC val: %lu\n", avg_llc_val); |
| ksft_print_msg("Cache span (%s): %lu\n", cmt ? "bytes" : "lines", |
| cache_span); |
| |
| return ret; |
| } |