| # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) |
| %YAML 1.2 |
| --- |
| $id: http://devicetree.org/schemas/pinctrl/renesas,rza1-ports.yaml# |
| $schema: http://devicetree.org/meta-schemas/core.yaml# |
| |
| title: Renesas RZ/A1 combined Pin and GPIO controller |
| |
| maintainers: |
| - Jacopo Mondi <jacopo+renesas@jmondi.org> |
| - Geert Uytterhoeven <geert+renesas@glider.be> |
| |
| description: |
| The Renesas SoCs of the RZ/A1 family feature a combined Pin and GPIO |
| controller, named "Ports" in the hardware reference manual. |
| Pin multiplexing and GPIO configuration is performed on a per-pin basis |
| writing configuration values to per-port register sets. |
| Each "port" features up to 16 pins, each of them configurable for GPIO |
| function (port mode) or in alternate function mode. |
| Up to 8 different alternate function modes exist for each single pin. |
| |
| properties: |
| compatible: |
| oneOf: |
| - const: renesas,r7s72100-ports # RZ/A1H |
| - items: |
| - const: renesas,r7s72101-ports # RZ/A1M |
| - const: renesas,r7s72100-ports # fallback |
| - const: renesas,r7s72102-ports # RZ/A1L |
| |
| reg: |
| maxItems: 1 |
| |
| allOf: |
| - $ref: pinctrl.yaml# |
| |
| required: |
| - compatible |
| - reg |
| |
| patternProperties: |
| "^gpio-[0-9]*$": |
| type: object |
| additionalProperties: false |
| |
| description: |
| Each port of the r7s72100 pin controller hardware is itself a GPIO |
| controller. |
| Different SoCs have different numbers of available pins per port, but |
| generally speaking, each of them can be configured in GPIO ("port") mode |
| on this hardware. |
| Describe GPIO controllers using sub-nodes with the following properties. |
| |
| properties: |
| gpio-controller: true |
| |
| '#gpio-cells': |
| const: 2 |
| |
| gpio-ranges: |
| maxItems: 1 |
| |
| required: |
| - gpio-controller |
| - '#gpio-cells' |
| - gpio-ranges |
| |
| |
| additionalProperties: |
| anyOf: |
| - type: object |
| allOf: |
| - $ref: pincfg-node.yaml# |
| - $ref: pinmux-node.yaml# |
| |
| description: |
| A pin multiplexing sub-node describes how to configure a set of (or a |
| single) pin in some desired alternate function mode. |
| A single sub-node may define several pin configurations. |
| A few alternate function require special pin configuration flags to be |
| supplied along with the alternate function configuration number. |
| The hardware reference manual specifies when a pin function requires |
| "software IO driven" mode to be specified. To do so use the generic |
| properties from the <include/linux/pinctrl/pinconf_generic.h> header |
| file to instruct the pin controller to perform the desired pin |
| configuration operation. |
| The hardware reference manual specifies when a pin has to be configured |
| to work in bi-directional mode and when the IO direction has to be |
| specified by software. Bi-directional pins must be managed by the pin |
| controller driver internally, while software driven IO direction has to |
| be explicitly selected when multiple options are available. |
| |
| properties: |
| pinmux: |
| description: | |
| Integer array representing pin number and pin multiplexing |
| configuration. |
| When a pin has to be configured in alternate function mode, use |
| this property to identify the pin by its global index, and provide |
| its alternate function configuration number along with it. |
| When multiple pins are required to be configured as part of the |
| same alternate function they shall be specified as members of the |
| same argument list of a single "pinmux" property. |
| Helper macros to ease assembling the pin index from its position |
| (port where it sits on and pin number) and alternate function |
| identifier are provided by the pin controller header file at: |
| <include/dt-bindings/pinctrl/r7s72100-pinctrl.h> |
| Integers values in "pinmux" argument list are assembled as: |
| ((PORT * 16 + PIN) | MUX_FUNC << 16) |
| |
| phandle: true |
| input-enable: true |
| output-enable: true |
| |
| required: |
| - pinmux |
| |
| additionalProperties: false |
| |
| - type: object |
| properties: |
| phandle: true |
| |
| additionalProperties: |
| $ref: "#/additionalProperties/anyOf/0" |
| |
| examples: |
| - | |
| #include <dt-bindings/pinctrl/r7s72100-pinctrl.h> |
| pinctrl: pinctrl@fcfe3000 { |
| compatible = "renesas,r7s72100-ports"; |
| |
| reg = <0xfcfe3000 0x4230>; |
| |
| /* |
| * A GPIO controller node, controlling 16 pins indexed from 0. |
| * The GPIO controller base in the global pin indexing space is pin |
| * 48, thus pins [0 - 15] on this controller map to pins [48 - 63] |
| * in the global pin indexing space. |
| */ |
| port3: gpio-3 { |
| gpio-controller; |
| #gpio-cells = <2>; |
| gpio-ranges = <&pinctrl 0 48 16>; |
| }; |
| |
| /* |
| * A serial communication interface with a TX output pin and an RX |
| * input pin. |
| * Pin #0 on port #3 is configured as alternate function #6. |
| * Pin #2 on port #3 is configured as alternate function #4. |
| */ |
| scif2_pins: serial2 { |
| pinmux = <RZA1_PINMUX(3, 0, 6)>, <RZA1_PINMUX(3, 2, 4)>; |
| }; |
| |
| |
| /* |
| * I2c master: both SDA and SCL pins need bi-directional operations |
| * Pin #4 on port #1 is configured as alternate function #1. |
| * Pin #5 on port #1 is configured as alternate function #1. |
| * Both need to work in bi-directional mode, the driver must manage |
| * this internally. |
| */ |
| i2c2_pins: i2c2 { |
| pinmux = <RZA1_PINMUX(1, 4, 1)>, <RZA1_PINMUX(1, 5, 1)>; |
| }; |
| |
| |
| /* |
| * Multi-function timer input and output compare pins. |
| */ |
| tioc0_pins: tioc0 { |
| /* |
| * Configure TIOC0A as software driven input |
| * Pin #0 on port #4 is configured as alternate function #2 |
| * with IO direction specified by software as input. |
| */ |
| tioc0_input_pins { |
| pinmux = <RZA1_PINMUX(4, 0, 2)>; |
| input-enable; |
| }; |
| |
| /* |
| * Configure TIOC0B as software driven output |
| * Pin #1 on port #4 is configured as alternate function #1 |
| * with IO direction specified by software as output. |
| */ |
| tioc0_output_pins { |
| pinmux = <RZA1_PINMUX(4, 1, 1)>; |
| output-enable; |
| }; |
| }; |
| }; |
