| /* |
| * Copyright (C) 2010 Bluecherry, LLC www.bluecherrydvr.com |
| * Copyright (C) 2010 Ben Collins <bcollins@bluecherry.net> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. |
| */ |
| |
| #include <linux/kernel.h> |
| |
| #include "solo6010.h" |
| |
| // #define SOLO_TEST_P2M |
| |
| int solo_p2m_dma(struct solo6010_dev *solo_dev, u8 id, int wr, |
| void *sys_addr, u32 ext_addr, u32 size) |
| { |
| dma_addr_t dma_addr; |
| int ret; |
| |
| WARN_ON(!size); |
| WARN_ON(id >= SOLO_NR_P2M); |
| if (!size || id >= SOLO_NR_P2M) |
| return -EINVAL; |
| |
| dma_addr = pci_map_single(solo_dev->pdev, sys_addr, size, |
| wr ? PCI_DMA_TODEVICE : PCI_DMA_FROMDEVICE); |
| |
| ret = solo_p2m_dma_t(solo_dev, id, wr, dma_addr, ext_addr, size); |
| |
| pci_unmap_single(solo_dev->pdev, dma_addr, size, |
| wr ? PCI_DMA_TODEVICE : PCI_DMA_FROMDEVICE); |
| |
| return ret; |
| } |
| |
| int solo_p2m_dma_t(struct solo6010_dev *solo_dev, u8 id, int wr, |
| dma_addr_t dma_addr, u32 ext_addr, u32 size) |
| { |
| struct solo_p2m_dev *p2m_dev; |
| unsigned int timeout = 0; |
| |
| WARN_ON(!size); |
| WARN_ON(id >= SOLO_NR_P2M); |
| if (!size || id >= SOLO_NR_P2M) |
| return -EINVAL; |
| |
| p2m_dev = &solo_dev->p2m_dev[id]; |
| |
| down(&p2m_dev->sem); |
| |
| start_dma: |
| INIT_COMPLETION(p2m_dev->completion); |
| p2m_dev->error = 0; |
| solo_reg_write(solo_dev, SOLO_P2M_TAR_ADR(id), dma_addr); |
| solo_reg_write(solo_dev, SOLO_P2M_EXT_ADR(id), ext_addr); |
| solo_reg_write(solo_dev, SOLO_P2M_EXT_CFG(id), |
| SOLO_P2M_COPY_SIZE(size >> 2)); |
| solo_reg_write(solo_dev, SOLO_P2M_CONTROL(id), |
| SOLO_P2M_BURST_SIZE(SOLO_P2M_BURST_256) | |
| (wr ? SOLO_P2M_WRITE : 0) | SOLO_P2M_TRANS_ON); |
| |
| timeout = wait_for_completion_timeout(&p2m_dev->completion, HZ); |
| |
| solo_reg_write(solo_dev, SOLO_P2M_CONTROL(id), 0); |
| |
| /* XXX Really looks to me like we will get stuck here if a |
| * real PCI P2M error occurs */ |
| if (p2m_dev->error) |
| goto start_dma; |
| |
| up(&p2m_dev->sem); |
| |
| return (timeout == 0) ? -EAGAIN : 0; |
| } |
| |
| #ifdef SOLO_TEST_P2M |
| |
| #define P2M_TEST_CHAR 0xbe |
| |
| static unsigned long long p2m_test(struct solo6010_dev *solo_dev, u8 id, |
| u32 base, int size) |
| { |
| u8 *wr_buf; |
| u8 *rd_buf; |
| int i; |
| unsigned long long err_cnt = 0; |
| |
| wr_buf = kmalloc(size, GFP_KERNEL); |
| if (!wr_buf) { |
| printk(SOLO6010_NAME ": Failed to malloc for p2m_test\n"); |
| return size; |
| } |
| |
| rd_buf = kmalloc(size, GFP_KERNEL); |
| if (!rd_buf) { |
| printk(SOLO6010_NAME ": Failed to malloc for p2m_test\n"); |
| kfree(wr_buf); |
| return size; |
| } |
| |
| memset(wr_buf, P2M_TEST_CHAR, size); |
| memset(rd_buf, P2M_TEST_CHAR + 1, size); |
| |
| solo_p2m_dma(solo_dev, id, 1, wr_buf, base, size); |
| solo_p2m_dma(solo_dev, id, 0, rd_buf, base, size); |
| |
| for (i = 0; i < size; i++) |
| if (wr_buf[i] != rd_buf[i]) |
| err_cnt++; |
| |
| kfree(wr_buf); |
| kfree(rd_buf); |
| |
| return err_cnt; |
| } |
| |
| #define TEST_CHUNK_SIZE (8 * 1024) |
| |
| static void run_p2m_test(struct solo6010_dev *solo_dev) |
| { |
| unsigned long long errs = 0; |
| u32 size = SOLO_JPEG_EXT_ADDR(solo_dev) + SOLO_JPEG_EXT_SIZE(solo_dev); |
| int i, d; |
| |
| printk(KERN_WARNING "%s: Testing %u bytes of external ram\n", |
| SOLO6010_NAME, size); |
| |
| for (i = 0; i < size; i += TEST_CHUNK_SIZE) |
| for (d = 0; d < 4; d++) |
| errs += p2m_test(solo_dev, d, i, TEST_CHUNK_SIZE); |
| |
| printk(KERN_WARNING "%s: Found %llu errors during p2m test\n", |
| SOLO6010_NAME, errs); |
| |
| return; |
| } |
| #else |
| #define run_p2m_test(__solo) do{}while(0) |
| #endif |
| |
| void solo_p2m_isr(struct solo6010_dev *solo_dev, int id) |
| { |
| solo_reg_write(solo_dev, SOLO_IRQ_STAT, SOLO_IRQ_P2M(id)); |
| complete(&solo_dev->p2m_dev[id].completion); |
| } |
| |
| void solo_p2m_error_isr(struct solo6010_dev *solo_dev, u32 status) |
| { |
| struct solo_p2m_dev *p2m_dev; |
| int i; |
| |
| if (!(status & SOLO_PCI_ERR_P2M)) |
| return; |
| |
| for (i = 0; i < SOLO_NR_P2M; i++) { |
| p2m_dev = &solo_dev->p2m_dev[i]; |
| p2m_dev->error = 1; |
| solo_reg_write(solo_dev, SOLO_P2M_CONTROL(i), 0); |
| complete(&p2m_dev->completion); |
| } |
| } |
| |
| void solo_p2m_exit(struct solo6010_dev *solo_dev) |
| { |
| int i; |
| |
| for (i = 0; i < SOLO_NR_P2M; i++) |
| solo6010_irq_off(solo_dev, SOLO_IRQ_P2M(i)); |
| } |
| |
| int solo_p2m_init(struct solo6010_dev *solo_dev) |
| { |
| struct solo_p2m_dev *p2m_dev; |
| int i; |
| |
| for (i = 0; i < SOLO_NR_P2M; i++) { |
| p2m_dev = &solo_dev->p2m_dev[i]; |
| |
| init_MUTEX(&p2m_dev->sem); |
| init_completion(&p2m_dev->completion); |
| |
| solo_reg_write(solo_dev, SOLO_P2M_DES_ADR(i), |
| __pa(p2m_dev->desc)); |
| |
| solo_reg_write(solo_dev, SOLO_P2M_CONTROL(i), 0); |
| solo_reg_write(solo_dev, SOLO_P2M_CONFIG(i), |
| SOLO_P2M_CSC_16BIT_565 | |
| SOLO_P2M_DMA_INTERVAL(0) | |
| SOLO_P2M_PCI_MASTER_MODE); |
| solo6010_irq_on(solo_dev, SOLO_IRQ_P2M(i)); |
| } |
| |
| run_p2m_test(solo_dev); |
| |
| return 0; |
| } |