| /* |
| * Copyright 2019 Advanced Micro Devices, Inc. |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a |
| * copy of this software and associated documentation files (the "Software"), |
| * to deal in the Software without restriction, including without limitation |
| * the rights to use, copy, modify, merge, publish, distribute, sublicense, |
| * and/or sell copies of the Software, and to permit persons to whom the |
| * Software is furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice shall be included in |
| * all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR |
| * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, |
| * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR |
| * OTHER DEALINGS IN THE SOFTWARE. |
| * |
| * Author: AMD |
| */ |
| |
| #include <drm/display/drm_dp_helper.h> |
| #include <drm/display/drm_dsc_helper.h> |
| #include "dc_hw_types.h" |
| #include "dsc.h" |
| #include "dc.h" |
| #include "rc_calc.h" |
| #include "fixed31_32.h" |
| |
| /* This module's internal functions */ |
| |
| /* default DSC policy target bitrate limit is 16bpp */ |
| static uint32_t dsc_policy_max_target_bpp_limit = 16; |
| |
| /* default DSC policy enables DSC only when needed */ |
| static bool dsc_policy_enable_dsc_when_not_needed; |
| |
| static bool dsc_policy_disable_dsc_stream_overhead; |
| |
| static bool disable_128b_132b_stream_overhead; |
| |
| #ifndef MAX |
| #define MAX(X, Y) ((X) > (Y) ? (X) : (Y)) |
| #endif |
| #ifndef MIN |
| #define MIN(X, Y) ((X) < (Y) ? (X) : (Y)) |
| #endif |
| |
| /* Need to account for padding due to pixel-to-symbol packing |
| * for uncompressed 128b/132b streams. |
| */ |
| static uint32_t apply_128b_132b_stream_overhead( |
| const struct dc_crtc_timing *timing, const uint32_t kbps) |
| { |
| uint32_t total_kbps = kbps; |
| |
| if (disable_128b_132b_stream_overhead) |
| return kbps; |
| |
| if (!timing->flags.DSC) { |
| struct fixed31_32 bpp; |
| struct fixed31_32 overhead_factor; |
| |
| bpp = dc_fixpt_from_int(kbps); |
| bpp = dc_fixpt_div_int(bpp, timing->pix_clk_100hz / 10); |
| |
| /* Symbols_per_HActive = HActive * bpp / (4 lanes * 32-bit symbol size) |
| * Overhead_factor = ceil(Symbols_per_HActive) / Symbols_per_HActive |
| */ |
| overhead_factor = dc_fixpt_from_int(timing->h_addressable); |
| overhead_factor = dc_fixpt_mul(overhead_factor, bpp); |
| overhead_factor = dc_fixpt_div_int(overhead_factor, 128); |
| overhead_factor = dc_fixpt_div( |
| dc_fixpt_from_int(dc_fixpt_ceil(overhead_factor)), |
| overhead_factor); |
| |
| total_kbps = dc_fixpt_ceil( |
| dc_fixpt_mul_int(overhead_factor, total_kbps)); |
| } |
| |
| return total_kbps; |
| } |
| |
| uint32_t dc_bandwidth_in_kbps_from_timing( |
| const struct dc_crtc_timing *timing, |
| const enum dc_link_encoding_format link_encoding) |
| { |
| uint32_t bits_per_channel = 0; |
| uint32_t kbps; |
| |
| if (timing->flags.DSC) |
| return dc_dsc_stream_bandwidth_in_kbps(timing, |
| timing->dsc_cfg.bits_per_pixel, |
| timing->dsc_cfg.num_slices_h, |
| timing->dsc_cfg.is_dp); |
| |
| switch (timing->display_color_depth) { |
| case COLOR_DEPTH_666: |
| bits_per_channel = 6; |
| break; |
| case COLOR_DEPTH_888: |
| bits_per_channel = 8; |
| break; |
| case COLOR_DEPTH_101010: |
| bits_per_channel = 10; |
| break; |
| case COLOR_DEPTH_121212: |
| bits_per_channel = 12; |
| break; |
| case COLOR_DEPTH_141414: |
| bits_per_channel = 14; |
| break; |
| case COLOR_DEPTH_161616: |
| bits_per_channel = 16; |
| break; |
| default: |
| ASSERT(bits_per_channel != 0); |
| bits_per_channel = 8; |
| break; |
| } |
| |
| kbps = timing->pix_clk_100hz / 10; |
| kbps *= bits_per_channel; |
| |
| if (timing->flags.Y_ONLY != 1) { |
| /*Only YOnly make reduce bandwidth by 1/3 compares to RGB*/ |
| kbps *= 3; |
| if (timing->pixel_encoding == PIXEL_ENCODING_YCBCR420) |
| kbps /= 2; |
| else if (timing->pixel_encoding == PIXEL_ENCODING_YCBCR422) |
| kbps = kbps * 2 / 3; |
| } |
| |
| if (link_encoding == DC_LINK_ENCODING_DP_128b_132b) |
| kbps = apply_128b_132b_stream_overhead(timing, kbps); |
| |
| if (link_encoding == DC_LINK_ENCODING_HDMI_FRL && |
| timing->vic == 0 && timing->hdmi_vic == 0 && |
| timing->frl_uncompressed_video_bandwidth_in_kbps != 0) |
| kbps = timing->frl_uncompressed_video_bandwidth_in_kbps; |
| |
| return kbps; |
| } |
| |
| |
| /* Forward Declerations */ |
| static bool decide_dsc_bandwidth_range( |
| const uint32_t min_bpp_x16, |
| const uint32_t max_bpp_x16, |
| const uint32_t num_slices_h, |
| const struct dsc_enc_caps *dsc_caps, |
| const struct dc_crtc_timing *timing, |
| const enum dc_link_encoding_format link_encoding, |
| struct dc_dsc_bw_range *range); |
| |
| static uint32_t compute_bpp_x16_from_target_bandwidth( |
| const uint32_t bandwidth_in_kbps, |
| const struct dc_crtc_timing *timing, |
| const uint32_t num_slices_h, |
| const uint32_t bpp_increment_div, |
| const bool is_dp); |
| |
| static void get_dsc_enc_caps( |
| const struct display_stream_compressor *dsc, |
| struct dsc_enc_caps *dsc_enc_caps, |
| int pixel_clock_100Hz); |
| |
| static bool intersect_dsc_caps( |
| const struct dsc_dec_dpcd_caps *dsc_sink_caps, |
| const struct dsc_enc_caps *dsc_enc_caps, |
| enum dc_pixel_encoding pixel_encoding, |
| struct dsc_enc_caps *dsc_common_caps); |
| |
| static bool setup_dsc_config( |
| const struct dsc_dec_dpcd_caps *dsc_sink_caps, |
| const struct dsc_enc_caps *dsc_enc_caps, |
| int target_bandwidth_kbps, |
| const struct dc_crtc_timing *timing, |
| const struct dc_dsc_config_options *options, |
| const enum dc_link_encoding_format link_encoding, |
| struct dc_dsc_config *dsc_cfg); |
| |
| static bool dsc_buff_block_size_from_dpcd(int dpcd_buff_block_size, int *buff_block_size) |
| { |
| |
| switch (dpcd_buff_block_size) { |
| case DP_DSC_RC_BUF_BLK_SIZE_1: |
| *buff_block_size = 1024; |
| break; |
| case DP_DSC_RC_BUF_BLK_SIZE_4: |
| *buff_block_size = 4 * 1024; |
| break; |
| case DP_DSC_RC_BUF_BLK_SIZE_16: |
| *buff_block_size = 16 * 1024; |
| break; |
| case DP_DSC_RC_BUF_BLK_SIZE_64: |
| *buff_block_size = 64 * 1024; |
| break; |
| default: { |
| dm_error("%s: DPCD DSC buffer size not recognized.\n", __func__); |
| return false; |
| } |
| } |
| |
| return true; |
| } |
| |
| |
| static bool dsc_line_buff_depth_from_dpcd(int dpcd_line_buff_bit_depth, int *line_buff_bit_depth) |
| { |
| if (0 <= dpcd_line_buff_bit_depth && dpcd_line_buff_bit_depth <= 7) |
| *line_buff_bit_depth = dpcd_line_buff_bit_depth + 9; |
| else if (dpcd_line_buff_bit_depth == 8) |
| *line_buff_bit_depth = 8; |
| else { |
| dm_error("%s: DPCD DSC buffer depth not recognized.\n", __func__); |
| return false; |
| } |
| |
| return true; |
| } |
| |
| |
| static bool dsc_throughput_from_dpcd(int dpcd_throughput, int *throughput) |
| { |
| switch (dpcd_throughput) { |
| case DP_DSC_THROUGHPUT_MODE_0_UNSUPPORTED: |
| *throughput = 0; |
| break; |
| case DP_DSC_THROUGHPUT_MODE_0_170: |
| *throughput = 170; |
| break; |
| case DP_DSC_THROUGHPUT_MODE_0_340: |
| *throughput = 340; |
| break; |
| case DP_DSC_THROUGHPUT_MODE_0_400: |
| *throughput = 400; |
| break; |
| case DP_DSC_THROUGHPUT_MODE_0_450: |
| *throughput = 450; |
| break; |
| case DP_DSC_THROUGHPUT_MODE_0_500: |
| *throughput = 500; |
| break; |
| case DP_DSC_THROUGHPUT_MODE_0_550: |
| *throughput = 550; |
| break; |
| case DP_DSC_THROUGHPUT_MODE_0_600: |
| *throughput = 600; |
| break; |
| case DP_DSC_THROUGHPUT_MODE_0_650: |
| *throughput = 650; |
| break; |
| case DP_DSC_THROUGHPUT_MODE_0_700: |
| *throughput = 700; |
| break; |
| case DP_DSC_THROUGHPUT_MODE_0_750: |
| *throughput = 750; |
| break; |
| case DP_DSC_THROUGHPUT_MODE_0_800: |
| *throughput = 800; |
| break; |
| case DP_DSC_THROUGHPUT_MODE_0_850: |
| *throughput = 850; |
| break; |
| case DP_DSC_THROUGHPUT_MODE_0_900: |
| *throughput = 900; |
| break; |
| case DP_DSC_THROUGHPUT_MODE_0_950: |
| *throughput = 950; |
| break; |
| case DP_DSC_THROUGHPUT_MODE_0_1000: |
| *throughput = 1000; |
| break; |
| default: { |
| dm_error("%s: DPCD DSC throughput mode not recognized.\n", __func__); |
| return false; |
| } |
| } |
| |
| return true; |
| } |
| |
| |
| static bool dsc_bpp_increment_div_from_dpcd(uint8_t bpp_increment_dpcd, uint32_t *bpp_increment_div) |
| { |
| // Mask bpp increment dpcd field to avoid reading other fields |
| bpp_increment_dpcd &= 0x7; |
| |
| switch (bpp_increment_dpcd) { |
| case 0: |
| *bpp_increment_div = 16; |
| break; |
| case 1: |
| *bpp_increment_div = 8; |
| break; |
| case 2: |
| *bpp_increment_div = 4; |
| break; |
| case 3: |
| *bpp_increment_div = 2; |
| break; |
| case 4: |
| *bpp_increment_div = 1; |
| break; |
| default: { |
| dm_error("%s: DPCD DSC bits-per-pixel increment not recognized.\n", __func__); |
| return false; |
| } |
| } |
| |
| return true; |
| } |
| |
| |
| |
| bool dc_dsc_parse_dsc_dpcd(const struct dc *dc, |
| const uint8_t *dpcd_dsc_basic_data, |
| const uint8_t *dpcd_dsc_branch_decoder_caps, |
| struct dsc_dec_dpcd_caps *dsc_sink_caps) |
| { |
| if (!dpcd_dsc_basic_data) |
| return false; |
| |
| dsc_sink_caps->is_dsc_supported = |
| (dpcd_dsc_basic_data[DP_DSC_SUPPORT - DP_DSC_SUPPORT] & DP_DSC_DECOMPRESSION_IS_SUPPORTED) != 0; |
| if (!dsc_sink_caps->is_dsc_supported) |
| return false; |
| |
| dsc_sink_caps->dsc_version = dpcd_dsc_basic_data[DP_DSC_REV - DP_DSC_SUPPORT]; |
| |
| { |
| int buff_block_size; |
| int buff_size; |
| |
| if (!dsc_buff_block_size_from_dpcd( |
| dpcd_dsc_basic_data[DP_DSC_RC_BUF_BLK_SIZE - DP_DSC_SUPPORT] & 0x03, |
| &buff_block_size)) |
| return false; |
| |
| buff_size = dpcd_dsc_basic_data[DP_DSC_RC_BUF_SIZE - DP_DSC_SUPPORT] + 1; |
| dsc_sink_caps->rc_buffer_size = buff_size * buff_block_size; |
| } |
| |
| dsc_sink_caps->slice_caps1.raw = dpcd_dsc_basic_data[DP_DSC_SLICE_CAP_1 - DP_DSC_SUPPORT]; |
| if (!dsc_line_buff_depth_from_dpcd(dpcd_dsc_basic_data[DP_DSC_LINE_BUF_BIT_DEPTH - DP_DSC_SUPPORT], |
| &dsc_sink_caps->lb_bit_depth)) |
| return false; |
| |
| dsc_sink_caps->is_block_pred_supported = |
| (dpcd_dsc_basic_data[DP_DSC_BLK_PREDICTION_SUPPORT - DP_DSC_SUPPORT] & |
| DP_DSC_BLK_PREDICTION_IS_SUPPORTED) != 0; |
| |
| dsc_sink_caps->edp_max_bits_per_pixel = |
| dpcd_dsc_basic_data[DP_DSC_MAX_BITS_PER_PIXEL_LOW - DP_DSC_SUPPORT] | |
| dpcd_dsc_basic_data[DP_DSC_MAX_BITS_PER_PIXEL_HI - DP_DSC_SUPPORT] << 8; |
| |
| dsc_sink_caps->color_formats.raw = dpcd_dsc_basic_data[DP_DSC_DEC_COLOR_FORMAT_CAP - DP_DSC_SUPPORT]; |
| dsc_sink_caps->color_depth.raw = dpcd_dsc_basic_data[DP_DSC_DEC_COLOR_DEPTH_CAP - DP_DSC_SUPPORT]; |
| |
| { |
| int dpcd_throughput = dpcd_dsc_basic_data[DP_DSC_PEAK_THROUGHPUT - DP_DSC_SUPPORT]; |
| int dsc_throughput_granular_delta; |
| |
| dsc_throughput_granular_delta = dpcd_dsc_basic_data[DP_DSC_RC_BUF_BLK_SIZE - DP_DSC_SUPPORT] >> 3; |
| dsc_throughput_granular_delta *= 2; |
| |
| if (!dsc_throughput_from_dpcd(dpcd_throughput & DP_DSC_THROUGHPUT_MODE_0_MASK, |
| &dsc_sink_caps->throughput_mode_0_mps)) |
| return false; |
| dsc_sink_caps->throughput_mode_0_mps += dsc_throughput_granular_delta; |
| |
| dpcd_throughput = (dpcd_throughput & DP_DSC_THROUGHPUT_MODE_1_MASK) >> DP_DSC_THROUGHPUT_MODE_1_SHIFT; |
| if (!dsc_throughput_from_dpcd(dpcd_throughput, &dsc_sink_caps->throughput_mode_1_mps)) |
| return false; |
| } |
| |
| dsc_sink_caps->max_slice_width = dpcd_dsc_basic_data[DP_DSC_MAX_SLICE_WIDTH - DP_DSC_SUPPORT] * 320; |
| dsc_sink_caps->slice_caps2.raw = dpcd_dsc_basic_data[DP_DSC_SLICE_CAP_2 - DP_DSC_SUPPORT]; |
| |
| if (!dsc_bpp_increment_div_from_dpcd(dpcd_dsc_basic_data[DP_DSC_BITS_PER_PIXEL_INC - DP_DSC_SUPPORT], |
| &dsc_sink_caps->bpp_increment_div)) |
| return false; |
| |
| if (dc->debug.dsc_bpp_increment_div) { |
| /* dsc_bpp_increment_div should onl be 1, 2, 4, 8 or 16, but rather than rejecting invalid values, |
| * we'll accept all and get it into range. This also makes the above check against 0 redundant, |
| * but that one stresses out the override will be only used if it's not 0. |
| */ |
| if (dc->debug.dsc_bpp_increment_div >= 1) |
| dsc_sink_caps->bpp_increment_div = 1; |
| if (dc->debug.dsc_bpp_increment_div >= 2) |
| dsc_sink_caps->bpp_increment_div = 2; |
| if (dc->debug.dsc_bpp_increment_div >= 4) |
| dsc_sink_caps->bpp_increment_div = 4; |
| if (dc->debug.dsc_bpp_increment_div >= 8) |
| dsc_sink_caps->bpp_increment_div = 8; |
| if (dc->debug.dsc_bpp_increment_div >= 16) |
| dsc_sink_caps->bpp_increment_div = 16; |
| } |
| |
| /* Extended caps */ |
| if (dpcd_dsc_branch_decoder_caps == NULL) { // branch decoder DPCD DSC data can be null for non branch device |
| dsc_sink_caps->branch_overall_throughput_0_mps = 0; |
| dsc_sink_caps->branch_overall_throughput_1_mps = 0; |
| dsc_sink_caps->branch_max_line_width = 0; |
| return true; |
| } |
| |
| dsc_sink_caps->branch_overall_throughput_0_mps = |
| dpcd_dsc_branch_decoder_caps[DP_DSC_BRANCH_OVERALL_THROUGHPUT_0 - DP_DSC_BRANCH_OVERALL_THROUGHPUT_0]; |
| if (dsc_sink_caps->branch_overall_throughput_0_mps == 0) |
| dsc_sink_caps->branch_overall_throughput_0_mps = 0; |
| else if (dsc_sink_caps->branch_overall_throughput_0_mps == 1) |
| dsc_sink_caps->branch_overall_throughput_0_mps = 680; |
| else { |
| dsc_sink_caps->branch_overall_throughput_0_mps *= 50; |
| dsc_sink_caps->branch_overall_throughput_0_mps += 600; |
| } |
| |
| dsc_sink_caps->branch_overall_throughput_1_mps = |
| dpcd_dsc_branch_decoder_caps[DP_DSC_BRANCH_OVERALL_THROUGHPUT_1 - DP_DSC_BRANCH_OVERALL_THROUGHPUT_0]; |
| if (dsc_sink_caps->branch_overall_throughput_1_mps == 0) |
| dsc_sink_caps->branch_overall_throughput_1_mps = 0; |
| else if (dsc_sink_caps->branch_overall_throughput_1_mps == 1) |
| dsc_sink_caps->branch_overall_throughput_1_mps = 680; |
| else { |
| dsc_sink_caps->branch_overall_throughput_1_mps *= 50; |
| dsc_sink_caps->branch_overall_throughput_1_mps += 600; |
| } |
| |
| dsc_sink_caps->branch_max_line_width = |
| dpcd_dsc_branch_decoder_caps[DP_DSC_BRANCH_MAX_LINE_WIDTH - DP_DSC_BRANCH_OVERALL_THROUGHPUT_0] * 320; |
| ASSERT(dsc_sink_caps->branch_max_line_width == 0 || dsc_sink_caps->branch_max_line_width >= 5120); |
| |
| dsc_sink_caps->is_dp = true; |
| return true; |
| } |
| |
| |
| /* If DSC is possbile, get DSC bandwidth range based on [min_bpp, max_bpp] target bitrate range and |
| * timing's pixel clock and uncompressed bandwidth. |
| * If DSC is not possible, leave '*range' untouched. |
| */ |
| bool dc_dsc_compute_bandwidth_range( |
| const struct display_stream_compressor *dsc, |
| uint32_t dsc_min_slice_height_override, |
| uint32_t min_bpp_x16, |
| uint32_t max_bpp_x16, |
| const struct dsc_dec_dpcd_caps *dsc_sink_caps, |
| const struct dc_crtc_timing *timing, |
| const enum dc_link_encoding_format link_encoding, |
| struct dc_dsc_bw_range *range) |
| { |
| bool is_dsc_possible = false; |
| struct dsc_enc_caps dsc_enc_caps; |
| struct dsc_enc_caps dsc_common_caps; |
| struct dc_dsc_config config; |
| struct dc_dsc_config_options options = {0}; |
| |
| options.dsc_min_slice_height_override = dsc_min_slice_height_override; |
| options.max_target_bpp_limit_override_x16 = max_bpp_x16; |
| options.slice_height_granularity = 1; |
| |
| get_dsc_enc_caps(dsc, &dsc_enc_caps, timing->pix_clk_100hz); |
| |
| is_dsc_possible = intersect_dsc_caps(dsc_sink_caps, &dsc_enc_caps, |
| timing->pixel_encoding, &dsc_common_caps); |
| |
| if (is_dsc_possible) |
| is_dsc_possible = setup_dsc_config(dsc_sink_caps, &dsc_enc_caps, 0, timing, |
| &options, link_encoding, &config); |
| |
| if (is_dsc_possible) |
| is_dsc_possible = decide_dsc_bandwidth_range(min_bpp_x16, max_bpp_x16, |
| config.num_slices_h, &dsc_common_caps, timing, link_encoding, range); |
| |
| return is_dsc_possible; |
| } |
| |
| static void get_dsc_enc_caps( |
| const struct display_stream_compressor *dsc, |
| struct dsc_enc_caps *dsc_enc_caps, |
| int pixel_clock_100Hz) |
| { |
| // This is a static HW query, so we can use any DSC |
| |
| memset(dsc_enc_caps, 0, sizeof(struct dsc_enc_caps)); |
| if (dsc) { |
| if (!dsc->ctx->dc->debug.disable_dsc) |
| dsc->funcs->dsc_get_enc_caps(dsc_enc_caps, pixel_clock_100Hz); |
| if (dsc->ctx->dc->debug.native422_support) |
| dsc_enc_caps->color_formats.bits.YCBCR_NATIVE_422 = 1; |
| } |
| } |
| |
| /* Returns 'false' if no intersection was found for at least one capability. |
| * It also implicitly validates some sink caps against invalid value of zero. |
| */ |
| static bool intersect_dsc_caps( |
| const struct dsc_dec_dpcd_caps *dsc_sink_caps, |
| const struct dsc_enc_caps *dsc_enc_caps, |
| enum dc_pixel_encoding pixel_encoding, |
| struct dsc_enc_caps *dsc_common_caps) |
| { |
| int32_t max_slices; |
| int32_t total_sink_throughput; |
| |
| memset(dsc_common_caps, 0, sizeof(struct dsc_enc_caps)); |
| |
| dsc_common_caps->dsc_version = min(dsc_sink_caps->dsc_version, dsc_enc_caps->dsc_version); |
| if (!dsc_common_caps->dsc_version) |
| return false; |
| |
| dsc_common_caps->slice_caps.bits.NUM_SLICES_1 = |
| dsc_sink_caps->slice_caps1.bits.NUM_SLICES_1 && dsc_enc_caps->slice_caps.bits.NUM_SLICES_1; |
| dsc_common_caps->slice_caps.bits.NUM_SLICES_2 = |
| dsc_sink_caps->slice_caps1.bits.NUM_SLICES_2 && dsc_enc_caps->slice_caps.bits.NUM_SLICES_2; |
| dsc_common_caps->slice_caps.bits.NUM_SLICES_4 = |
| dsc_sink_caps->slice_caps1.bits.NUM_SLICES_4 && dsc_enc_caps->slice_caps.bits.NUM_SLICES_4; |
| dsc_common_caps->slice_caps.bits.NUM_SLICES_8 = |
| dsc_sink_caps->slice_caps1.bits.NUM_SLICES_8 && dsc_enc_caps->slice_caps.bits.NUM_SLICES_8; |
| dsc_common_caps->slice_caps.bits.NUM_SLICES_12 = |
| dsc_sink_caps->slice_caps1.bits.NUM_SLICES_12 && dsc_enc_caps->slice_caps.bits.NUM_SLICES_12; |
| dsc_common_caps->slice_caps.bits.NUM_SLICES_16 = |
| dsc_sink_caps->slice_caps2.bits.NUM_SLICES_16 && dsc_enc_caps->slice_caps.bits.NUM_SLICES_16; |
| |
| if (!dsc_common_caps->slice_caps.raw) |
| return false; |
| |
| dsc_common_caps->lb_bit_depth = min(dsc_sink_caps->lb_bit_depth, dsc_enc_caps->lb_bit_depth); |
| if (!dsc_common_caps->lb_bit_depth) |
| return false; |
| |
| dsc_common_caps->is_block_pred_supported = |
| dsc_sink_caps->is_block_pred_supported && dsc_enc_caps->is_block_pred_supported; |
| |
| dsc_common_caps->color_formats.raw = dsc_sink_caps->color_formats.raw & dsc_enc_caps->color_formats.raw; |
| if (!dsc_common_caps->color_formats.raw) |
| return false; |
| |
| dsc_common_caps->color_depth.raw = dsc_sink_caps->color_depth.raw & dsc_enc_caps->color_depth.raw; |
| if (!dsc_common_caps->color_depth.raw) |
| return false; |
| |
| max_slices = 0; |
| if (dsc_common_caps->slice_caps.bits.NUM_SLICES_1) |
| max_slices = 1; |
| |
| if (dsc_common_caps->slice_caps.bits.NUM_SLICES_2) |
| max_slices = 2; |
| |
| if (dsc_common_caps->slice_caps.bits.NUM_SLICES_4) |
| max_slices = 4; |
| |
| total_sink_throughput = max_slices * dsc_sink_caps->throughput_mode_0_mps; |
| if (pixel_encoding == PIXEL_ENCODING_YCBCR422 || pixel_encoding == PIXEL_ENCODING_YCBCR420) |
| total_sink_throughput = max_slices * dsc_sink_caps->throughput_mode_1_mps; |
| |
| dsc_common_caps->max_total_throughput_mps = min(total_sink_throughput, dsc_enc_caps->max_total_throughput_mps); |
| |
| dsc_common_caps->max_slice_width = min(dsc_sink_caps->max_slice_width, dsc_enc_caps->max_slice_width); |
| if (!dsc_common_caps->max_slice_width) |
| return false; |
| |
| dsc_common_caps->bpp_increment_div = min(dsc_sink_caps->bpp_increment_div, dsc_enc_caps->bpp_increment_div); |
| |
| // TODO DSC: Remove this workaround for N422 and 420 once it's fixed, or move it to get_dsc_encoder_caps() |
| if (pixel_encoding == PIXEL_ENCODING_YCBCR422 || pixel_encoding == PIXEL_ENCODING_YCBCR420) |
| dsc_common_caps->bpp_increment_div = min(dsc_common_caps->bpp_increment_div, (uint32_t)8); |
| |
| dsc_common_caps->edp_sink_max_bits_per_pixel = dsc_sink_caps->edp_max_bits_per_pixel; |
| dsc_common_caps->is_dp = dsc_sink_caps->is_dp; |
| return true; |
| } |
| |
| static inline uint32_t dsc_div_by_10_round_up(uint32_t value) |
| { |
| return (value + 9) / 10; |
| } |
| |
| static uint32_t compute_bpp_x16_from_target_bandwidth( |
| const uint32_t bandwidth_in_kbps, |
| const struct dc_crtc_timing *timing, |
| const uint32_t num_slices_h, |
| const uint32_t bpp_increment_div, |
| const bool is_dp) |
| { |
| uint32_t overhead_in_kbps; |
| struct fixed31_32 effective_bandwidth_in_kbps; |
| struct fixed31_32 bpp_x16; |
| |
| overhead_in_kbps = dc_dsc_stream_bandwidth_overhead_in_kbps( |
| timing, num_slices_h, is_dp); |
| effective_bandwidth_in_kbps = dc_fixpt_from_int(bandwidth_in_kbps); |
| effective_bandwidth_in_kbps = dc_fixpt_sub_int(effective_bandwidth_in_kbps, |
| overhead_in_kbps); |
| bpp_x16 = dc_fixpt_mul_int(effective_bandwidth_in_kbps, 10); |
| bpp_x16 = dc_fixpt_div_int(bpp_x16, timing->pix_clk_100hz); |
| bpp_x16 = dc_fixpt_from_int(dc_fixpt_floor(dc_fixpt_mul_int(bpp_x16, bpp_increment_div))); |
| bpp_x16 = dc_fixpt_div_int(bpp_x16, bpp_increment_div); |
| bpp_x16 = dc_fixpt_mul_int(bpp_x16, 16); |
| return dc_fixpt_floor(bpp_x16); |
| } |
| |
| /* Decide DSC bandwidth range based on signal, timing, specs specific and input min and max |
| * requirements. |
| * The range output includes decided min/max target bpp, the respective bandwidth requirements |
| * and native timing bandwidth requirement when DSC is not used. |
| */ |
| static bool decide_dsc_bandwidth_range( |
| const uint32_t min_bpp_x16, |
| const uint32_t max_bpp_x16, |
| const uint32_t num_slices_h, |
| const struct dsc_enc_caps *dsc_caps, |
| const struct dc_crtc_timing *timing, |
| const enum dc_link_encoding_format link_encoding, |
| struct dc_dsc_bw_range *range) |
| { |
| uint32_t preferred_bpp_x16 = timing->dsc_fixed_bits_per_pixel_x16; |
| |
| memset(range, 0, sizeof(*range)); |
| |
| /* apply signal, timing, specs and explicitly specified DSC range requirements */ |
| if (preferred_bpp_x16) { |
| if (preferred_bpp_x16 <= max_bpp_x16 && |
| preferred_bpp_x16 >= min_bpp_x16) { |
| range->max_target_bpp_x16 = preferred_bpp_x16; |
| range->min_target_bpp_x16 = preferred_bpp_x16; |
| } |
| } |
| /* TODO - make this value generic to all signal types */ |
| else if (dsc_caps->edp_sink_max_bits_per_pixel) { |
| /* apply max bpp limitation from edp sink */ |
| range->max_target_bpp_x16 = MIN(dsc_caps->edp_sink_max_bits_per_pixel, |
| max_bpp_x16); |
| range->min_target_bpp_x16 = min_bpp_x16; |
| } |
| else { |
| range->max_target_bpp_x16 = max_bpp_x16; |
| range->min_target_bpp_x16 = min_bpp_x16; |
| } |
| |
| /* populate output structure */ |
| if (range->max_target_bpp_x16 >= range->min_target_bpp_x16 && range->min_target_bpp_x16 > 0) { |
| /* native stream bandwidth */ |
| range->stream_kbps = dc_bandwidth_in_kbps_from_timing(timing, link_encoding); |
| |
| /* max dsc target bpp */ |
| range->max_kbps = dc_dsc_stream_bandwidth_in_kbps(timing, |
| range->max_target_bpp_x16, num_slices_h, dsc_caps->is_dp); |
| |
| /* min dsc target bpp */ |
| range->min_kbps = dc_dsc_stream_bandwidth_in_kbps(timing, |
| range->min_target_bpp_x16, num_slices_h, dsc_caps->is_dp); |
| } |
| |
| return range->max_kbps >= range->min_kbps && range->min_kbps > 0; |
| } |
| |
| /* Decides if DSC should be used and calculates target bpp if it should, applying DSC policy. |
| * |
| * Returns: |
| * - 'true' if target bpp is decided |
| * - 'false' if target bpp cannot be decided (e.g. cannot fit even with min DSC bpp), |
| */ |
| static bool decide_dsc_target_bpp_x16( |
| const struct dc_dsc_policy *policy, |
| const struct dsc_enc_caps *dsc_common_caps, |
| const int target_bandwidth_kbps, |
| const struct dc_crtc_timing *timing, |
| const int num_slices_h, |
| const enum dc_link_encoding_format link_encoding, |
| int *target_bpp_x16) |
| { |
| struct dc_dsc_bw_range range; |
| |
| *target_bpp_x16 = 0; |
| |
| if (decide_dsc_bandwidth_range(policy->min_target_bpp * 16, policy->max_target_bpp * 16, |
| num_slices_h, dsc_common_caps, timing, link_encoding, &range)) { |
| if (target_bandwidth_kbps >= range.stream_kbps) { |
| if (policy->enable_dsc_when_not_needed) |
| /* enable max bpp even dsc is not needed */ |
| *target_bpp_x16 = range.max_target_bpp_x16; |
| } else if (target_bandwidth_kbps >= range.max_kbps) { |
| /* use max target bpp allowed */ |
| *target_bpp_x16 = range.max_target_bpp_x16; |
| } else if (target_bandwidth_kbps >= range.min_kbps) { |
| /* use target bpp that can take entire target bandwidth */ |
| *target_bpp_x16 = compute_bpp_x16_from_target_bandwidth( |
| target_bandwidth_kbps, timing, num_slices_h, |
| dsc_common_caps->bpp_increment_div, |
| dsc_common_caps->is_dp); |
| } |
| } |
| |
| return *target_bpp_x16 != 0; |
| } |
| |
| #define MIN_AVAILABLE_SLICES_SIZE 6 |
| |
| static int get_available_dsc_slices(union dsc_enc_slice_caps slice_caps, int *available_slices) |
| { |
| int idx = 0; |
| |
| if (slice_caps.bits.NUM_SLICES_1) |
| available_slices[idx++] = 1; |
| |
| if (slice_caps.bits.NUM_SLICES_2) |
| available_slices[idx++] = 2; |
| |
| if (slice_caps.bits.NUM_SLICES_4) |
| available_slices[idx++] = 4; |
| |
| if (slice_caps.bits.NUM_SLICES_8) |
| available_slices[idx++] = 8; |
| |
| if (slice_caps.bits.NUM_SLICES_12) |
| available_slices[idx++] = 12; |
| |
| if (slice_caps.bits.NUM_SLICES_16) |
| available_slices[idx++] = 16; |
| |
| return idx; |
| } |
| |
| |
| static int get_max_dsc_slices(union dsc_enc_slice_caps slice_caps) |
| { |
| int max_slices = 0; |
| int available_slices[MIN_AVAILABLE_SLICES_SIZE]; |
| int end_idx = get_available_dsc_slices(slice_caps, &available_slices[0]); |
| |
| if (end_idx > 0) |
| max_slices = available_slices[end_idx - 1]; |
| |
| return max_slices; |
| } |
| |
| |
| // Increment slice number in available slice numbers stops if possible, or just increment if not |
| static int inc_num_slices(union dsc_enc_slice_caps slice_caps, int num_slices) |
| { |
| // Get next bigger num slices available in common caps |
| int available_slices[MIN_AVAILABLE_SLICES_SIZE]; |
| int end_idx; |
| int i; |
| int new_num_slices = num_slices; |
| |
| end_idx = get_available_dsc_slices(slice_caps, &available_slices[0]); |
| if (end_idx == 0) { |
| // No available slices found |
| new_num_slices++; |
| return new_num_slices; |
| } |
| |
| // Numbers of slices found - get the next bigger number |
| for (i = 0; i < end_idx; i++) { |
| if (new_num_slices < available_slices[i]) { |
| new_num_slices = available_slices[i]; |
| break; |
| } |
| } |
| |
| if (new_num_slices == num_slices) // No bigger number of slices found |
| new_num_slices++; |
| |
| return new_num_slices; |
| } |
| |
| |
| // Decrement slice number in available slice numbers stops if possible, or just decrement if not. Stop at zero. |
| static int dec_num_slices(union dsc_enc_slice_caps slice_caps, int num_slices) |
| { |
| // Get next bigger num slices available in common caps |
| int available_slices[MIN_AVAILABLE_SLICES_SIZE]; |
| int end_idx; |
| int i; |
| int new_num_slices = num_slices; |
| |
| end_idx = get_available_dsc_slices(slice_caps, &available_slices[0]); |
| if (end_idx == 0 && new_num_slices > 0) { |
| // No numbers of slices found |
| new_num_slices++; |
| return new_num_slices; |
| } |
| |
| // Numbers of slices found - get the next smaller number |
| for (i = end_idx - 1; i >= 0; i--) { |
| if (new_num_slices > available_slices[i]) { |
| new_num_slices = available_slices[i]; |
| break; |
| } |
| } |
| |
| if (new_num_slices == num_slices) { |
| // No smaller number of slices found |
| new_num_slices--; |
| if (new_num_slices < 0) |
| new_num_slices = 0; |
| } |
| |
| return new_num_slices; |
| } |
| |
| |
| // Choose next bigger number of slices if the requested number of slices is not available |
| static int fit_num_slices_up(union dsc_enc_slice_caps slice_caps, int num_slices) |
| { |
| // Get next bigger num slices available in common caps |
| int available_slices[MIN_AVAILABLE_SLICES_SIZE]; |
| int end_idx; |
| int i; |
| int new_num_slices = num_slices; |
| |
| end_idx = get_available_dsc_slices(slice_caps, &available_slices[0]); |
| if (end_idx == 0) { |
| // No available slices found |
| new_num_slices++; |
| return new_num_slices; |
| } |
| |
| // Numbers of slices found - get the equal or next bigger number |
| for (i = 0; i < end_idx; i++) { |
| if (new_num_slices <= available_slices[i]) { |
| new_num_slices = available_slices[i]; |
| break; |
| } |
| } |
| |
| return new_num_slices; |
| } |
| |
| |
| /* Attempts to set DSC configuration for the stream, applying DSC policy. |
| * Returns 'true' if successful or 'false' if not. |
| * |
| * Parameters: |
| * |
| * dsc_sink_caps - DSC sink decoder capabilities (from DPCD) |
| * |
| * dsc_enc_caps - DSC encoder capabilities |
| * |
| * target_bandwidth_kbps - Target bandwidth to fit the stream into. |
| * If 0, do not calculate target bpp. |
| * |
| * timing - The stream timing to fit into 'target_bandwidth_kbps' or apply |
| * maximum compression to, if 'target_badwidth == 0' |
| * |
| * dsc_cfg - DSC configuration to use if it was possible to come up with |
| * one for the given inputs. |
| * The target bitrate after DSC can be calculated by multiplying |
| * dsc_cfg.bits_per_pixel (in U6.4 format) by pixel rate, e.g. |
| * |
| * dsc_stream_bitrate_kbps = (int)ceil(timing->pix_clk_khz * dsc_cfg.bits_per_pixel / 16.0); |
| */ |
| static bool setup_dsc_config( |
| const struct dsc_dec_dpcd_caps *dsc_sink_caps, |
| const struct dsc_enc_caps *dsc_enc_caps, |
| int target_bandwidth_kbps, |
| const struct dc_crtc_timing *timing, |
| const struct dc_dsc_config_options *options, |
| const enum dc_link_encoding_format link_encoding, |
| struct dc_dsc_config *dsc_cfg) |
| { |
| struct dsc_enc_caps dsc_common_caps; |
| int max_slices_h; |
| int min_slices_h; |
| int num_slices_h; |
| int pic_width; |
| int slice_width; |
| int target_bpp; |
| int sink_per_slice_throughput_mps; |
| int branch_max_throughput_mps = 0; |
| bool is_dsc_possible = false; |
| int pic_height; |
| int slice_height; |
| struct dc_dsc_policy policy; |
| |
| memset(dsc_cfg, 0, sizeof(struct dc_dsc_config)); |
| |
| dc_dsc_get_policy_for_timing(timing, options->max_target_bpp_limit_override_x16, &policy); |
| pic_width = timing->h_addressable + timing->h_border_left + timing->h_border_right; |
| pic_height = timing->v_addressable + timing->v_border_top + timing->v_border_bottom; |
| |
| if (!dsc_sink_caps->is_dsc_supported) |
| goto done; |
| |
| if (dsc_sink_caps->branch_max_line_width && dsc_sink_caps->branch_max_line_width < pic_width) |
| goto done; |
| |
| // Intersect decoder with encoder DSC caps and validate DSC settings |
| is_dsc_possible = intersect_dsc_caps(dsc_sink_caps, dsc_enc_caps, timing->pixel_encoding, &dsc_common_caps); |
| if (!is_dsc_possible) |
| goto done; |
| |
| sink_per_slice_throughput_mps = 0; |
| |
| // Validate available DSC settings against the mode timing |
| |
| // Validate color format (and pick up the throughput values) |
| dsc_cfg->ycbcr422_simple = false; |
| switch (timing->pixel_encoding) { |
| case PIXEL_ENCODING_RGB: |
| is_dsc_possible = (bool)dsc_common_caps.color_formats.bits.RGB; |
| sink_per_slice_throughput_mps = dsc_sink_caps->throughput_mode_0_mps; |
| branch_max_throughput_mps = dsc_sink_caps->branch_overall_throughput_0_mps; |
| break; |
| case PIXEL_ENCODING_YCBCR444: |
| is_dsc_possible = (bool)dsc_common_caps.color_formats.bits.YCBCR_444; |
| sink_per_slice_throughput_mps = dsc_sink_caps->throughput_mode_0_mps; |
| branch_max_throughput_mps = dsc_sink_caps->branch_overall_throughput_0_mps; |
| break; |
| case PIXEL_ENCODING_YCBCR422: |
| is_dsc_possible = (bool)dsc_common_caps.color_formats.bits.YCBCR_NATIVE_422; |
| sink_per_slice_throughput_mps = dsc_sink_caps->throughput_mode_1_mps; |
| branch_max_throughput_mps = dsc_sink_caps->branch_overall_throughput_1_mps; |
| if (!is_dsc_possible) { |
| is_dsc_possible = (bool)dsc_common_caps.color_formats.bits.YCBCR_SIMPLE_422; |
| dsc_cfg->ycbcr422_simple = is_dsc_possible; |
| sink_per_slice_throughput_mps = dsc_sink_caps->throughput_mode_0_mps; |
| } |
| break; |
| case PIXEL_ENCODING_YCBCR420: |
| is_dsc_possible = (bool)dsc_common_caps.color_formats.bits.YCBCR_NATIVE_420; |
| sink_per_slice_throughput_mps = dsc_sink_caps->throughput_mode_1_mps; |
| branch_max_throughput_mps = dsc_sink_caps->branch_overall_throughput_1_mps; |
| break; |
| default: |
| is_dsc_possible = false; |
| } |
| |
| // Validate branch's maximum throughput |
| if (branch_max_throughput_mps && dsc_div_by_10_round_up(timing->pix_clk_100hz) > branch_max_throughput_mps * 1000) |
| is_dsc_possible = false; |
| |
| if (!is_dsc_possible) |
| goto done; |
| |
| // Color depth |
| switch (timing->display_color_depth) { |
| case COLOR_DEPTH_888: |
| is_dsc_possible = (bool)dsc_common_caps.color_depth.bits.COLOR_DEPTH_8_BPC; |
| break; |
| case COLOR_DEPTH_101010: |
| is_dsc_possible = (bool)dsc_common_caps.color_depth.bits.COLOR_DEPTH_10_BPC; |
| break; |
| case COLOR_DEPTH_121212: |
| is_dsc_possible = (bool)dsc_common_caps.color_depth.bits.COLOR_DEPTH_12_BPC; |
| break; |
| default: |
| is_dsc_possible = false; |
| } |
| |
| if (!is_dsc_possible) |
| goto done; |
| |
| // Slice width (i.e. number of slices per line) |
| max_slices_h = get_max_dsc_slices(dsc_common_caps.slice_caps); |
| |
| while (max_slices_h > 0) { |
| if (pic_width % max_slices_h == 0) |
| break; |
| |
| max_slices_h = dec_num_slices(dsc_common_caps.slice_caps, max_slices_h); |
| } |
| |
| is_dsc_possible = (dsc_common_caps.max_slice_width > 0); |
| if (!is_dsc_possible) |
| goto done; |
| |
| min_slices_h = pic_width / dsc_common_caps.max_slice_width; |
| if (pic_width % dsc_common_caps.max_slice_width) |
| min_slices_h++; |
| |
| min_slices_h = fit_num_slices_up(dsc_common_caps.slice_caps, min_slices_h); |
| |
| while (min_slices_h <= max_slices_h) { |
| int pix_clk_per_slice_khz = dsc_div_by_10_round_up(timing->pix_clk_100hz) / min_slices_h; |
| if (pix_clk_per_slice_khz <= sink_per_slice_throughput_mps * 1000) |
| break; |
| |
| min_slices_h = inc_num_slices(dsc_common_caps.slice_caps, min_slices_h); |
| } |
| |
| is_dsc_possible = (min_slices_h <= max_slices_h); |
| |
| if (pic_width % min_slices_h != 0) |
| min_slices_h = 0; // DSC TODO: Maybe try increasing the number of slices first? |
| |
| if (min_slices_h == 0 && max_slices_h == 0) |
| is_dsc_possible = false; |
| |
| if (!is_dsc_possible) |
| goto done; |
| |
| if (policy.use_min_slices_h) { |
| if (min_slices_h > 0) |
| num_slices_h = min_slices_h; |
| else if (max_slices_h > 0) { // Fall back to max slices if min slices is not working out |
| if (policy.max_slices_h) |
| num_slices_h = min(policy.max_slices_h, max_slices_h); |
| else |
| num_slices_h = max_slices_h; |
| } else |
| is_dsc_possible = false; |
| } else { |
| if (max_slices_h > 0) { |
| if (policy.max_slices_h) |
| num_slices_h = min(policy.max_slices_h, max_slices_h); |
| else |
| num_slices_h = max_slices_h; |
| } else if (min_slices_h > 0) // Fall back to min slices if max slices is not possible |
| num_slices_h = min_slices_h; |
| else |
| is_dsc_possible = false; |
| } |
| // When we force 2:1 ODM, we can't have 1 slice to divide amongst 2 separate DSC instances |
| // need to enforce at minimum 2 horizontal slices |
| if (options->dsc_force_odm_hslice_override) { |
| num_slices_h = fit_num_slices_up(dsc_common_caps.slice_caps, 2); |
| if (num_slices_h == 0) |
| is_dsc_possible = false; |
| } |
| |
| if (!is_dsc_possible) |
| goto done; |
| |
| dsc_cfg->num_slices_h = num_slices_h; |
| slice_width = pic_width / num_slices_h; |
| |
| is_dsc_possible = slice_width <= dsc_common_caps.max_slice_width; |
| if (!is_dsc_possible) |
| goto done; |
| |
| // Slice height (i.e. number of slices per column): start with policy and pick the first one that height is divisible by. |
| // For 4:2:0 make sure the slice height is divisible by 2 as well. |
| if (options->dsc_min_slice_height_override == 0) |
| slice_height = min(policy.min_slice_height, pic_height); |
| else |
| slice_height = min((int)(options->dsc_min_slice_height_override), pic_height); |
| |
| while (slice_height < pic_height && (pic_height % slice_height != 0 || |
| slice_height % options->slice_height_granularity != 0 || |
| (timing->pixel_encoding == PIXEL_ENCODING_YCBCR420 && slice_height % 2 != 0))) |
| slice_height++; |
| |
| if (timing->pixel_encoding == PIXEL_ENCODING_YCBCR420) // For the case when pic_height < dsc_policy.min_sice_height |
| is_dsc_possible = (slice_height % 2 == 0); |
| |
| if (!is_dsc_possible) |
| goto done; |
| |
| dsc_cfg->num_slices_v = pic_height/slice_height; |
| |
| if (target_bandwidth_kbps > 0) { |
| is_dsc_possible = decide_dsc_target_bpp_x16( |
| &policy, |
| &dsc_common_caps, |
| target_bandwidth_kbps, |
| timing, |
| num_slices_h, |
| link_encoding, |
| &target_bpp); |
| dsc_cfg->bits_per_pixel = target_bpp; |
| } |
| if (!is_dsc_possible) |
| goto done; |
| |
| // Final decission: can we do DSC or not? |
| if (is_dsc_possible) { |
| // Fill out the rest of DSC settings |
| dsc_cfg->block_pred_enable = dsc_common_caps.is_block_pred_supported; |
| dsc_cfg->linebuf_depth = dsc_common_caps.lb_bit_depth; |
| dsc_cfg->version_minor = (dsc_common_caps.dsc_version & 0xf0) >> 4; |
| dsc_cfg->is_dp = dsc_sink_caps->is_dp; |
| } |
| |
| done: |
| if (!is_dsc_possible) |
| memset(dsc_cfg, 0, sizeof(struct dc_dsc_config)); |
| |
| return is_dsc_possible; |
| } |
| |
| bool dc_dsc_compute_config( |
| const struct display_stream_compressor *dsc, |
| const struct dsc_dec_dpcd_caps *dsc_sink_caps, |
| const struct dc_dsc_config_options *options, |
| uint32_t target_bandwidth_kbps, |
| const struct dc_crtc_timing *timing, |
| const enum dc_link_encoding_format link_encoding, |
| struct dc_dsc_config *dsc_cfg) |
| { |
| bool is_dsc_possible = false; |
| struct dsc_enc_caps dsc_enc_caps; |
| |
| get_dsc_enc_caps(dsc, &dsc_enc_caps, timing->pix_clk_100hz); |
| is_dsc_possible = setup_dsc_config(dsc_sink_caps, |
| &dsc_enc_caps, |
| target_bandwidth_kbps, |
| timing, options, link_encoding, dsc_cfg); |
| return is_dsc_possible; |
| } |
| |
| uint32_t dc_dsc_stream_bandwidth_in_kbps(const struct dc_crtc_timing *timing, |
| uint32_t bpp_x16, uint32_t num_slices_h, bool is_dp) |
| { |
| uint32_t overhead_in_kbps; |
| struct fixed31_32 bpp; |
| struct fixed31_32 actual_bandwidth_in_kbps; |
| |
| overhead_in_kbps = dc_dsc_stream_bandwidth_overhead_in_kbps( |
| timing, num_slices_h, is_dp); |
| bpp = dc_fixpt_from_fraction(bpp_x16, 16); |
| actual_bandwidth_in_kbps = dc_fixpt_from_fraction(timing->pix_clk_100hz, 10); |
| actual_bandwidth_in_kbps = dc_fixpt_mul(actual_bandwidth_in_kbps, bpp); |
| actual_bandwidth_in_kbps = dc_fixpt_add_int(actual_bandwidth_in_kbps, overhead_in_kbps); |
| return dc_fixpt_ceil(actual_bandwidth_in_kbps); |
| } |
| |
| uint32_t dc_dsc_stream_bandwidth_overhead_in_kbps( |
| const struct dc_crtc_timing *timing, |
| const int num_slices_h, |
| const bool is_dp) |
| { |
| struct fixed31_32 max_dsc_overhead; |
| struct fixed31_32 refresh_rate; |
| |
| if (dsc_policy_disable_dsc_stream_overhead || !is_dp) |
| return 0; |
| |
| /* use target bpp that can take entire target bandwidth */ |
| refresh_rate = dc_fixpt_from_int(timing->pix_clk_100hz); |
| refresh_rate = dc_fixpt_div_int(refresh_rate, timing->h_total); |
| refresh_rate = dc_fixpt_div_int(refresh_rate, timing->v_total); |
| refresh_rate = dc_fixpt_mul_int(refresh_rate, 100); |
| |
| max_dsc_overhead = dc_fixpt_from_int(num_slices_h); |
| max_dsc_overhead = dc_fixpt_mul_int(max_dsc_overhead, timing->v_total); |
| max_dsc_overhead = dc_fixpt_mul_int(max_dsc_overhead, 256); |
| max_dsc_overhead = dc_fixpt_div_int(max_dsc_overhead, 1000); |
| max_dsc_overhead = dc_fixpt_mul(max_dsc_overhead, refresh_rate); |
| |
| return dc_fixpt_ceil(max_dsc_overhead); |
| } |
| |
| void dc_dsc_get_policy_for_timing(const struct dc_crtc_timing *timing, |
| uint32_t max_target_bpp_limit_override_x16, |
| struct dc_dsc_policy *policy) |
| { |
| uint32_t bpc = 0; |
| |
| policy->min_target_bpp = 0; |
| policy->max_target_bpp = 0; |
| |
| /* DSC Policy: Use minimum number of slices that fits the pixel clock */ |
| policy->use_min_slices_h = true; |
| |
| /* DSC Policy: Use max available slices |
| * (in our case 4 for or 8, depending on the mode) |
| */ |
| policy->max_slices_h = 0; |
| |
| /* DSC Policy: Use slice height recommended |
| * by VESA DSC Spreadsheet user guide |
| */ |
| policy->min_slice_height = 108; |
| |
| /* DSC Policy: follow DP specs with an internal upper limit to 16 bpp |
| * for better interoperability |
| */ |
| switch (timing->display_color_depth) { |
| case COLOR_DEPTH_888: |
| bpc = 8; |
| break; |
| case COLOR_DEPTH_101010: |
| bpc = 10; |
| break; |
| case COLOR_DEPTH_121212: |
| bpc = 12; |
| break; |
| default: |
| return; |
| } |
| switch (timing->pixel_encoding) { |
| case PIXEL_ENCODING_RGB: |
| case PIXEL_ENCODING_YCBCR444: |
| case PIXEL_ENCODING_YCBCR422: /* assume no YCbCr422 native support */ |
| /* DP specs limits to 8 */ |
| policy->min_target_bpp = 8; |
| /* DP specs limits to 3 x bpc */ |
| policy->max_target_bpp = 3 * bpc; |
| break; |
| case PIXEL_ENCODING_YCBCR420: |
| /* DP specs limits to 6 */ |
| policy->min_target_bpp = 6; |
| /* DP specs limits to 1.5 x bpc assume bpc is an even number */ |
| policy->max_target_bpp = bpc * 3 / 2; |
| break; |
| default: |
| return; |
| } |
| |
| /* internal upper limit, default 16 bpp */ |
| if (policy->max_target_bpp > dsc_policy_max_target_bpp_limit) |
| policy->max_target_bpp = dsc_policy_max_target_bpp_limit; |
| |
| /* apply override */ |
| if (max_target_bpp_limit_override_x16 && policy->max_target_bpp > max_target_bpp_limit_override_x16 / 16) |
| policy->max_target_bpp = max_target_bpp_limit_override_x16 / 16; |
| |
| /* enable DSC when not needed, default false */ |
| if (dsc_policy_enable_dsc_when_not_needed) |
| policy->enable_dsc_when_not_needed = dsc_policy_enable_dsc_when_not_needed; |
| else |
| policy->enable_dsc_when_not_needed = false; |
| } |
| |
| void dc_dsc_policy_set_max_target_bpp_limit(uint32_t limit) |
| { |
| dsc_policy_max_target_bpp_limit = limit; |
| } |
| |
| void dc_dsc_policy_set_enable_dsc_when_not_needed(bool enable) |
| { |
| dsc_policy_enable_dsc_when_not_needed = enable; |
| } |
| |
| void dc_dsc_policy_set_disable_dsc_stream_overhead(bool disable) |
| { |
| dsc_policy_disable_dsc_stream_overhead = disable; |
| } |
| |
| void dc_set_disable_128b_132b_stream_overhead(bool disable) |
| { |
| disable_128b_132b_stream_overhead = disable; |
| } |
| |
| void dc_dsc_get_default_config_option(const struct dc *dc, struct dc_dsc_config_options *options) |
| { |
| options->dsc_min_slice_height_override = dc->debug.dsc_min_slice_height_override; |
| options->dsc_force_odm_hslice_override = dc->debug.force_odm_combine; |
| options->max_target_bpp_limit_override_x16 = 0; |
| options->slice_height_granularity = 1; |
| } |