blob: 814b9598edd183dc95cc223f93e3dab1b461fc90 [file] [log] [blame]
# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
%YAML 1.2
---
$id: http://devicetree.org/schemas/pinctrl/nuvoton,npcm845-pinctrl.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Nuvoton NPCM845 Pin Controller and GPIO
maintainers:
- Tomer Maimon <tmaimon77@gmail.com>
description:
The Nuvoton BMC NPCM8XX Pin Controller multi-function routed through
the multiplexing block, Each pin supports GPIO functionality (GPIOx)
and multiple functions that directly connect the pin to different
hardware blocks.
properties:
compatible:
const: nuvoton,npcm845-pinctrl
ranges:
maxItems: 1
'#address-cells':
const: 1
'#size-cells':
const: 1
nuvoton,sysgcr:
$ref: /schemas/types.yaml#/definitions/phandle
description: a phandle to access GCR registers.
patternProperties:
'^gpio@':
type: object
additionalProperties: false
description:
Eight GPIO banks that each contain 32 GPIOs.
properties:
gpio-controller: true
'#gpio-cells':
const: 2
reg:
maxItems: 1
interrupts:
maxItems: 1
gpio-ranges:
maxItems: 1
required:
- gpio-controller
- '#gpio-cells'
- reg
- interrupts
- gpio-ranges
'-mux$':
$ref: pinmux-node.yaml#
properties:
groups:
description:
One or more groups of pins to mux to a certain function
items:
enum: [ iox1, iox2, smb1d, smb2d, lkgpo1, lkgpo2, ioxh, gspi,
smb5b, smb5c, lkgpo0, pspi, jm1, jm2, smb4den, smb4b,
smb4c, smb15, smb16, smb17, smb18, smb19, smb20, smb21,
smb22, smb23, smb23b, smb4d, smb14, smb5, smb4, smb3,
spi0cs1, spi0cs2, spi0cs3, spi1cs0, spi1cs1, spi1cs2,
spi1cs3, spi1cs23, smb3c, smb3b, bmcuart0a, uart1, jtag2,
bmcuart1, uart2, sg1mdio, bmcuart0b, r1err, r1md, r1oen,
r2oen, rmii3, r3oen, smb3d, fanin0, fanin1, fanin2, fanin3,
fanin4, fanin5, fanin6, fanin7, fanin8, fanin9, fanin10,
fanin11, fanin12, fanin13, fanin14, fanin15, pwm0, pwm1, pwm2,
pwm3, r2, r2err, r2md, r3rxer, ga20kbc, smb5d, lpc, espi, rg2,
ddr, i3c0, i3c1, i3c2, i3c3, i3c4, i3c5, smb0, smb1, smb2,
smb2c, smb2b, smb1c, smb1b, smb8, smb9, smb10, smb11, sd1,
sd1pwr, pwm4, pwm5, pwm6, pwm7, pwm8, pwm9, pwm10, pwm11,
mmc8, mmc, mmcwp, mmccd, mmcrst, clkout, serirq, lpcclk,
scipme, smi, smb6, smb6b, smb6c, smb6d, smb7, smb7b, smb7c,
smb7d, spi1, faninx, r1, spi3, spi3cs1, spi3quad, spi3cs2,
spi3cs3, nprd_smi, smb0b, smb0c, smb0den, smb0d, ddc, rg2mdio,
wdog1, wdog2, smb12, smb13, spix, spixcs1, clkreq, hgpio0,
hgpio1, hgpio2, hgpio3, hgpio4, hgpio5, hgpio6, hgpio7, bu4,
bu4b, bu5, bu5b, bu6, gpo187 ]
function:
description:
The function that a group of pins is muxed to
enum: [ iox1, iox2, smb1d, smb2d, lkgpo1, lkgpo2, ioxh, gspi,
smb5b, smb5c, lkgpo0, pspi, jm1, jm2, smb4den, smb4b,
smb4c, smb15, smb16, smb17, smb18, smb19, smb20, smb21,
smb22, smb23, smb23b, smb4d, smb14, smb5, smb4, smb3,
spi0cs1, spi0cs2, spi0cs3, spi1cs0, spi1cs1, spi1cs2,
spi1cs3, spi1cs23, smb3c, smb3b, bmcuart0a, uart1, jtag2,
bmcuart1, uart2, sg1mdio, bmcuart0b, r1err, r1md, r1oen,
r2oen, rmii3, r3oen, smb3d, fanin0, fanin1, fanin2, fanin3,
fanin4, fanin5, fanin6, fanin7, fanin8, fanin9, fanin10,
fanin11, fanin12, fanin13, fanin14, fanin15, pwm0, pwm1, pwm2,
pwm3, r2, r2err, r2md, r3rxer, ga20kbc, smb5d, lpc, espi, rg2,
ddr, i3c0, i3c1, i3c2, i3c3, i3c4, i3c5, smb0, smb1, smb2,
smb2c, smb2b, smb1c, smb1b, smb8, smb9, smb10, smb11, sd1,
sd1pwr, pwm4, pwm5, pwm6, pwm7, pwm8, pwm9, pwm10, pwm11,
mmc8, mmc, mmcwp, mmccd, mmcrst, clkout, serirq, lpcclk,
scipme, smi, smb6, smb6b, smb6c, smb6d, smb7, smb7b, smb7c,
smb7d, spi1, faninx, r1, spi3, spi3cs1, spi3quad, spi3cs2,
spi3cs3, nprd_smi, smb0b, smb0c, smb0den, smb0d, ddc, rg2mdio,
wdog1, wdog2, smb12, smb13, spix, spixcs1, clkreq, hgpio0,
hgpio1, hgpio2, hgpio3, hgpio4, hgpio5, hgpio6, hgpio7, bu4,
bu4b, bu5, bu5b, bu6, gpo187 ]
dependencies:
groups: [ function ]
function: [ groups ]
additionalProperties: false
'^pin':
$ref: pincfg-node.yaml#
properties:
pins:
description:
A list of pins to configure in certain ways, such as enabling
debouncing
items:
pattern: '^GPIO([0-9]|[0-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-6])'
bias-disable: true
bias-pull-up: true
bias-pull-down: true
input-enable: true
output-low: true
output-high: true
drive-push-pull: true
drive-open-drain: true
input-debounce:
description:
Debouncing periods in microseconds, one period per interrupt
bank found in the controller
minItems: 1
maxItems: 4
slew-rate:
description: |
0: Low rate
1: High rate
enum: [0, 1]
drive-strength:
enum: [ 0, 1, 2, 4, 8, 12 ]
additionalProperties: false
allOf:
- $ref: pinctrl.yaml#
required:
- compatible
- ranges
- '#address-cells'
- '#size-cells'
- nuvoton,sysgcr
additionalProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/gpio/gpio.h>
soc {
#address-cells = <2>;
#size-cells = <2>;
pinctrl: pinctrl@f0010000 {
compatible = "nuvoton,npcm845-pinctrl";
ranges = <0x0 0x0 0xf0010000 0x8000>;
#address-cells = <1>;
#size-cells = <1>;
nuvoton,sysgcr = <&gcr>;
gpio0: gpio@0 {
gpio-controller;
#gpio-cells = <2>;
reg = <0x0 0xb0>;
interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
gpio-ranges = <&pinctrl 0 0 32>;
};
fanin0_pin: fanin0-mux {
groups = "fanin0";
function = "fanin0";
};
pin34_slew: pin34-slew {
pins = "GPIO34/I3C4_SDA";
bias-disable;
};
};
};