| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * UART driver for the Greybus "generic" UART module. |
| * |
| * Copyright 2014 Google Inc. |
| * Copyright 2014 Linaro Ltd. |
| * |
| * Heavily based on drivers/usb/class/cdc-acm.c and |
| * drivers/usb/serial/usb-serial.c. |
| */ |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
| |
| #include <linux/kernel.h> |
| #include <linux/errno.h> |
| #include <linux/module.h> |
| #include <linux/sched/signal.h> |
| #include <linux/wait.h> |
| #include <linux/slab.h> |
| #include <linux/uaccess.h> |
| #include <linux/mutex.h> |
| #include <linux/tty.h> |
| #include <linux/serial.h> |
| #include <linux/tty_driver.h> |
| #include <linux/tty_flip.h> |
| #include <linux/idr.h> |
| #include <linux/fs.h> |
| #include <linux/kdev_t.h> |
| #include <linux/kfifo.h> |
| #include <linux/workqueue.h> |
| #include <linux/completion.h> |
| #include <linux/greybus.h> |
| |
| #include "gbphy.h" |
| |
| #define GB_NUM_MINORS 16 /* 16 is more than enough */ |
| #define GB_NAME "ttyGB" |
| |
| #define GB_UART_WRITE_FIFO_SIZE PAGE_SIZE |
| #define GB_UART_WRITE_ROOM_MARGIN 1 /* leave some space in fifo */ |
| #define GB_UART_FIRMWARE_CREDITS 4096 |
| #define GB_UART_CREDIT_WAIT_TIMEOUT_MSEC 10000 |
| |
| struct gb_tty { |
| struct gbphy_device *gbphy_dev; |
| struct tty_port port; |
| void *buffer; |
| size_t buffer_payload_max; |
| struct gb_connection *connection; |
| u16 cport_id; |
| unsigned int minor; |
| unsigned char clocal; |
| bool disconnected; |
| spinlock_t read_lock; |
| spinlock_t write_lock; |
| struct async_icount iocount; |
| struct async_icount oldcount; |
| wait_queue_head_t wioctl; |
| struct mutex mutex; |
| u8 ctrlin; /* input control lines */ |
| u8 ctrlout; /* output control lines */ |
| struct gb_uart_set_line_coding_request line_coding; |
| struct work_struct tx_work; |
| struct kfifo write_fifo; |
| bool close_pending; |
| unsigned int credits; |
| struct completion credits_complete; |
| }; |
| |
| static struct tty_driver *gb_tty_driver; |
| static DEFINE_IDR(tty_minors); |
| static DEFINE_MUTEX(table_lock); |
| |
| static int gb_uart_receive_data_handler(struct gb_operation *op) |
| { |
| struct gb_connection *connection = op->connection; |
| struct gb_tty *gb_tty = gb_connection_get_data(connection); |
| struct tty_port *port = &gb_tty->port; |
| struct gb_message *request = op->request; |
| struct gb_uart_recv_data_request *receive_data; |
| u16 recv_data_size; |
| int count; |
| unsigned long tty_flags = TTY_NORMAL; |
| |
| if (request->payload_size < sizeof(*receive_data)) { |
| dev_err(&gb_tty->gbphy_dev->dev, |
| "short receive-data request received (%zu < %zu)\n", |
| request->payload_size, sizeof(*receive_data)); |
| return -EINVAL; |
| } |
| |
| receive_data = op->request->payload; |
| recv_data_size = le16_to_cpu(receive_data->size); |
| |
| if (recv_data_size != request->payload_size - sizeof(*receive_data)) { |
| dev_err(&gb_tty->gbphy_dev->dev, |
| "malformed receive-data request received (%u != %zu)\n", |
| recv_data_size, |
| request->payload_size - sizeof(*receive_data)); |
| return -EINVAL; |
| } |
| |
| if (!recv_data_size) |
| return -EINVAL; |
| |
| if (receive_data->flags) { |
| if (receive_data->flags & GB_UART_RECV_FLAG_BREAK) |
| tty_flags = TTY_BREAK; |
| else if (receive_data->flags & GB_UART_RECV_FLAG_PARITY) |
| tty_flags = TTY_PARITY; |
| else if (receive_data->flags & GB_UART_RECV_FLAG_FRAMING) |
| tty_flags = TTY_FRAME; |
| |
| /* overrun is special, not associated with a char */ |
| if (receive_data->flags & GB_UART_RECV_FLAG_OVERRUN) |
| tty_insert_flip_char(port, 0, TTY_OVERRUN); |
| } |
| count = tty_insert_flip_string_fixed_flag(port, receive_data->data, |
| tty_flags, recv_data_size); |
| if (count != recv_data_size) { |
| dev_err(&gb_tty->gbphy_dev->dev, |
| "UART: RX 0x%08x bytes only wrote 0x%08x\n", |
| recv_data_size, count); |
| } |
| if (count) |
| tty_flip_buffer_push(port); |
| return 0; |
| } |
| |
| static int gb_uart_serial_state_handler(struct gb_operation *op) |
| { |
| struct gb_connection *connection = op->connection; |
| struct gb_tty *gb_tty = gb_connection_get_data(connection); |
| struct gb_message *request = op->request; |
| struct gb_uart_serial_state_request *serial_state; |
| |
| if (request->payload_size < sizeof(*serial_state)) { |
| dev_err(&gb_tty->gbphy_dev->dev, |
| "short serial-state event received (%zu < %zu)\n", |
| request->payload_size, sizeof(*serial_state)); |
| return -EINVAL; |
| } |
| |
| serial_state = request->payload; |
| gb_tty->ctrlin = serial_state->control; |
| |
| return 0; |
| } |
| |
| static int gb_uart_receive_credits_handler(struct gb_operation *op) |
| { |
| struct gb_connection *connection = op->connection; |
| struct gb_tty *gb_tty = gb_connection_get_data(connection); |
| struct gb_message *request = op->request; |
| struct gb_uart_receive_credits_request *credit_request; |
| unsigned long flags; |
| unsigned int incoming_credits; |
| int ret = 0; |
| |
| if (request->payload_size < sizeof(*credit_request)) { |
| dev_err(&gb_tty->gbphy_dev->dev, |
| "short receive_credits event received (%zu < %zu)\n", |
| request->payload_size, |
| sizeof(*credit_request)); |
| return -EINVAL; |
| } |
| |
| credit_request = request->payload; |
| incoming_credits = le16_to_cpu(credit_request->count); |
| |
| spin_lock_irqsave(&gb_tty->write_lock, flags); |
| gb_tty->credits += incoming_credits; |
| if (gb_tty->credits > GB_UART_FIRMWARE_CREDITS) { |
| gb_tty->credits -= incoming_credits; |
| ret = -EINVAL; |
| } |
| spin_unlock_irqrestore(&gb_tty->write_lock, flags); |
| |
| if (ret) { |
| dev_err(&gb_tty->gbphy_dev->dev, |
| "invalid number of incoming credits: %d\n", |
| incoming_credits); |
| return ret; |
| } |
| |
| if (!gb_tty->close_pending) |
| schedule_work(&gb_tty->tx_work); |
| |
| /* |
| * the port the tty layer may be waiting for credits |
| */ |
| tty_port_tty_wakeup(&gb_tty->port); |
| |
| if (gb_tty->credits == GB_UART_FIRMWARE_CREDITS) |
| complete(&gb_tty->credits_complete); |
| |
| return ret; |
| } |
| |
| static int gb_uart_request_handler(struct gb_operation *op) |
| { |
| struct gb_connection *connection = op->connection; |
| struct gb_tty *gb_tty = gb_connection_get_data(connection); |
| int type = op->type; |
| int ret; |
| |
| switch (type) { |
| case GB_UART_TYPE_RECEIVE_DATA: |
| ret = gb_uart_receive_data_handler(op); |
| break; |
| case GB_UART_TYPE_SERIAL_STATE: |
| ret = gb_uart_serial_state_handler(op); |
| break; |
| case GB_UART_TYPE_RECEIVE_CREDITS: |
| ret = gb_uart_receive_credits_handler(op); |
| break; |
| default: |
| dev_err(&gb_tty->gbphy_dev->dev, |
| "unsupported unsolicited request: 0x%02x\n", type); |
| ret = -EINVAL; |
| } |
| |
| return ret; |
| } |
| |
| static void gb_uart_tx_write_work(struct work_struct *work) |
| { |
| struct gb_uart_send_data_request *request; |
| struct gb_tty *gb_tty; |
| unsigned long flags; |
| unsigned int send_size; |
| int ret; |
| |
| gb_tty = container_of(work, struct gb_tty, tx_work); |
| request = gb_tty->buffer; |
| |
| while (1) { |
| if (gb_tty->close_pending) |
| break; |
| |
| spin_lock_irqsave(&gb_tty->write_lock, flags); |
| send_size = gb_tty->buffer_payload_max; |
| if (send_size > gb_tty->credits) |
| send_size = gb_tty->credits; |
| |
| send_size = kfifo_out_peek(&gb_tty->write_fifo, |
| &request->data[0], |
| send_size); |
| if (!send_size) { |
| spin_unlock_irqrestore(&gb_tty->write_lock, flags); |
| break; |
| } |
| |
| gb_tty->credits -= send_size; |
| spin_unlock_irqrestore(&gb_tty->write_lock, flags); |
| |
| request->size = cpu_to_le16(send_size); |
| ret = gb_operation_sync(gb_tty->connection, |
| GB_UART_TYPE_SEND_DATA, |
| request, sizeof(*request) + send_size, |
| NULL, 0); |
| if (ret) { |
| dev_err(&gb_tty->gbphy_dev->dev, |
| "send data error: %d\n", ret); |
| spin_lock_irqsave(&gb_tty->write_lock, flags); |
| gb_tty->credits += send_size; |
| spin_unlock_irqrestore(&gb_tty->write_lock, flags); |
| if (!gb_tty->close_pending) |
| schedule_work(work); |
| return; |
| } |
| |
| spin_lock_irqsave(&gb_tty->write_lock, flags); |
| ret = kfifo_out(&gb_tty->write_fifo, &request->data[0], |
| send_size); |
| spin_unlock_irqrestore(&gb_tty->write_lock, flags); |
| |
| tty_port_tty_wakeup(&gb_tty->port); |
| } |
| } |
| |
| static int send_line_coding(struct gb_tty *tty) |
| { |
| return gb_operation_sync(tty->connection, GB_UART_TYPE_SET_LINE_CODING, |
| &tty->line_coding, sizeof(tty->line_coding), |
| NULL, 0); |
| } |
| |
| static int send_control(struct gb_tty *gb_tty, u8 control) |
| { |
| struct gb_uart_set_control_line_state_request request; |
| |
| request.control = control; |
| return gb_operation_sync(gb_tty->connection, |
| GB_UART_TYPE_SET_CONTROL_LINE_STATE, |
| &request, sizeof(request), NULL, 0); |
| } |
| |
| static int send_break(struct gb_tty *gb_tty, u8 state) |
| { |
| struct gb_uart_set_break_request request; |
| |
| if ((state != 0) && (state != 1)) { |
| dev_err(&gb_tty->gbphy_dev->dev, |
| "invalid break state of %d\n", state); |
| return -EINVAL; |
| } |
| |
| request.state = state; |
| return gb_operation_sync(gb_tty->connection, GB_UART_TYPE_SEND_BREAK, |
| &request, sizeof(request), NULL, 0); |
| } |
| |
| static int gb_uart_wait_for_all_credits(struct gb_tty *gb_tty) |
| { |
| int ret; |
| |
| if (gb_tty->credits == GB_UART_FIRMWARE_CREDITS) |
| return 0; |
| |
| ret = wait_for_completion_timeout(&gb_tty->credits_complete, |
| msecs_to_jiffies(GB_UART_CREDIT_WAIT_TIMEOUT_MSEC)); |
| if (!ret) { |
| dev_err(&gb_tty->gbphy_dev->dev, |
| "time out waiting for credits\n"); |
| return -ETIMEDOUT; |
| } |
| |
| return 0; |
| } |
| |
| static int gb_uart_flush(struct gb_tty *gb_tty, u8 flags) |
| { |
| struct gb_uart_serial_flush_request request; |
| |
| request.flags = flags; |
| return gb_operation_sync(gb_tty->connection, GB_UART_TYPE_FLUSH_FIFOS, |
| &request, sizeof(request), NULL, 0); |
| } |
| |
| static struct gb_tty *get_gb_by_minor(unsigned int minor) |
| { |
| struct gb_tty *gb_tty; |
| |
| mutex_lock(&table_lock); |
| gb_tty = idr_find(&tty_minors, minor); |
| if (gb_tty) { |
| mutex_lock(&gb_tty->mutex); |
| if (gb_tty->disconnected) { |
| mutex_unlock(&gb_tty->mutex); |
| gb_tty = NULL; |
| } else { |
| tty_port_get(&gb_tty->port); |
| mutex_unlock(&gb_tty->mutex); |
| } |
| } |
| mutex_unlock(&table_lock); |
| return gb_tty; |
| } |
| |
| static int alloc_minor(struct gb_tty *gb_tty) |
| { |
| int minor; |
| |
| mutex_lock(&table_lock); |
| minor = idr_alloc(&tty_minors, gb_tty, 0, GB_NUM_MINORS, GFP_KERNEL); |
| mutex_unlock(&table_lock); |
| if (minor >= 0) |
| gb_tty->minor = minor; |
| return minor; |
| } |
| |
| static void release_minor(struct gb_tty *gb_tty) |
| { |
| int minor = gb_tty->minor; |
| |
| gb_tty->minor = 0; /* Maybe should use an invalid value instead */ |
| mutex_lock(&table_lock); |
| idr_remove(&tty_minors, minor); |
| mutex_unlock(&table_lock); |
| } |
| |
| static int gb_tty_install(struct tty_driver *driver, struct tty_struct *tty) |
| { |
| struct gb_tty *gb_tty; |
| int retval; |
| |
| gb_tty = get_gb_by_minor(tty->index); |
| if (!gb_tty) |
| return -ENODEV; |
| |
| retval = tty_standard_install(driver, tty); |
| if (retval) |
| goto error; |
| |
| tty->driver_data = gb_tty; |
| return 0; |
| error: |
| tty_port_put(&gb_tty->port); |
| return retval; |
| } |
| |
| static int gb_tty_open(struct tty_struct *tty, struct file *file) |
| { |
| struct gb_tty *gb_tty = tty->driver_data; |
| |
| return tty_port_open(&gb_tty->port, tty, file); |
| } |
| |
| static void gb_tty_close(struct tty_struct *tty, struct file *file) |
| { |
| struct gb_tty *gb_tty = tty->driver_data; |
| |
| tty_port_close(&gb_tty->port, tty, file); |
| } |
| |
| static void gb_tty_cleanup(struct tty_struct *tty) |
| { |
| struct gb_tty *gb_tty = tty->driver_data; |
| |
| tty_port_put(&gb_tty->port); |
| } |
| |
| static void gb_tty_hangup(struct tty_struct *tty) |
| { |
| struct gb_tty *gb_tty = tty->driver_data; |
| |
| tty_port_hangup(&gb_tty->port); |
| } |
| |
| static ssize_t gb_tty_write(struct tty_struct *tty, const u8 *buf, size_t count) |
| { |
| struct gb_tty *gb_tty = tty->driver_data; |
| |
| count = kfifo_in_spinlocked(&gb_tty->write_fifo, buf, count, |
| &gb_tty->write_lock); |
| if (count && !gb_tty->close_pending) |
| schedule_work(&gb_tty->tx_work); |
| |
| return count; |
| } |
| |
| static unsigned int gb_tty_write_room(struct tty_struct *tty) |
| { |
| struct gb_tty *gb_tty = tty->driver_data; |
| unsigned long flags; |
| int room; |
| |
| spin_lock_irqsave(&gb_tty->write_lock, flags); |
| room = kfifo_avail(&gb_tty->write_fifo); |
| spin_unlock_irqrestore(&gb_tty->write_lock, flags); |
| |
| room -= GB_UART_WRITE_ROOM_MARGIN; |
| if (room < 0) |
| return 0; |
| |
| return room; |
| } |
| |
| static unsigned int gb_tty_chars_in_buffer(struct tty_struct *tty) |
| { |
| struct gb_tty *gb_tty = tty->driver_data; |
| unsigned long flags; |
| unsigned int chars; |
| |
| spin_lock_irqsave(&gb_tty->write_lock, flags); |
| chars = kfifo_len(&gb_tty->write_fifo); |
| if (gb_tty->credits < GB_UART_FIRMWARE_CREDITS) |
| chars += GB_UART_FIRMWARE_CREDITS - gb_tty->credits; |
| spin_unlock_irqrestore(&gb_tty->write_lock, flags); |
| |
| return chars; |
| } |
| |
| static int gb_tty_break_ctl(struct tty_struct *tty, int state) |
| { |
| struct gb_tty *gb_tty = tty->driver_data; |
| |
| return send_break(gb_tty, state ? 1 : 0); |
| } |
| |
| static void gb_tty_set_termios(struct tty_struct *tty, |
| const struct ktermios *termios_old) |
| { |
| struct gb_uart_set_line_coding_request newline; |
| struct gb_tty *gb_tty = tty->driver_data; |
| struct ktermios *termios = &tty->termios; |
| u8 newctrl = gb_tty->ctrlout; |
| |
| newline.rate = cpu_to_le32(tty_get_baud_rate(tty)); |
| newline.format = termios->c_cflag & CSTOPB ? |
| GB_SERIAL_2_STOP_BITS : GB_SERIAL_1_STOP_BITS; |
| newline.parity = termios->c_cflag & PARENB ? |
| (termios->c_cflag & PARODD ? 1 : 2) + |
| (termios->c_cflag & CMSPAR ? 2 : 0) : 0; |
| |
| newline.data_bits = tty_get_char_size(termios->c_cflag); |
| |
| /* FIXME: needs to clear unsupported bits in the termios */ |
| gb_tty->clocal = ((termios->c_cflag & CLOCAL) != 0); |
| |
| if (C_BAUD(tty) == B0) { |
| newline.rate = gb_tty->line_coding.rate; |
| newctrl &= ~(GB_UART_CTRL_DTR | GB_UART_CTRL_RTS); |
| } else if (termios_old && (termios_old->c_cflag & CBAUD) == B0) { |
| newctrl |= (GB_UART_CTRL_DTR | GB_UART_CTRL_RTS); |
| } |
| |
| if (newctrl != gb_tty->ctrlout) { |
| gb_tty->ctrlout = newctrl; |
| send_control(gb_tty, newctrl); |
| } |
| |
| if (C_CRTSCTS(tty) && C_BAUD(tty) != B0) |
| newline.flow_control = GB_SERIAL_AUTO_RTSCTS_EN; |
| else |
| newline.flow_control = 0; |
| |
| if (memcmp(&gb_tty->line_coding, &newline, sizeof(newline))) { |
| memcpy(&gb_tty->line_coding, &newline, sizeof(newline)); |
| send_line_coding(gb_tty); |
| } |
| } |
| |
| static int gb_tty_tiocmget(struct tty_struct *tty) |
| { |
| struct gb_tty *gb_tty = tty->driver_data; |
| |
| return (gb_tty->ctrlout & GB_UART_CTRL_DTR ? TIOCM_DTR : 0) | |
| (gb_tty->ctrlout & GB_UART_CTRL_RTS ? TIOCM_RTS : 0) | |
| (gb_tty->ctrlin & GB_UART_CTRL_DSR ? TIOCM_DSR : 0) | |
| (gb_tty->ctrlin & GB_UART_CTRL_RI ? TIOCM_RI : 0) | |
| (gb_tty->ctrlin & GB_UART_CTRL_DCD ? TIOCM_CD : 0) | |
| TIOCM_CTS; |
| } |
| |
| static int gb_tty_tiocmset(struct tty_struct *tty, unsigned int set, |
| unsigned int clear) |
| { |
| struct gb_tty *gb_tty = tty->driver_data; |
| u8 newctrl = gb_tty->ctrlout; |
| |
| set = (set & TIOCM_DTR ? GB_UART_CTRL_DTR : 0) | |
| (set & TIOCM_RTS ? GB_UART_CTRL_RTS : 0); |
| clear = (clear & TIOCM_DTR ? GB_UART_CTRL_DTR : 0) | |
| (clear & TIOCM_RTS ? GB_UART_CTRL_RTS : 0); |
| |
| newctrl = (newctrl & ~clear) | set; |
| if (gb_tty->ctrlout == newctrl) |
| return 0; |
| |
| gb_tty->ctrlout = newctrl; |
| return send_control(gb_tty, newctrl); |
| } |
| |
| static void gb_tty_throttle(struct tty_struct *tty) |
| { |
| struct gb_tty *gb_tty = tty->driver_data; |
| unsigned char stop_char; |
| int retval; |
| |
| if (I_IXOFF(tty)) { |
| stop_char = STOP_CHAR(tty); |
| retval = gb_tty_write(tty, &stop_char, 1); |
| if (retval <= 0) |
| return; |
| } |
| |
| if (tty->termios.c_cflag & CRTSCTS) { |
| gb_tty->ctrlout &= ~GB_UART_CTRL_RTS; |
| retval = send_control(gb_tty, gb_tty->ctrlout); |
| } |
| } |
| |
| static void gb_tty_unthrottle(struct tty_struct *tty) |
| { |
| struct gb_tty *gb_tty = tty->driver_data; |
| unsigned char start_char; |
| int retval; |
| |
| if (I_IXOFF(tty)) { |
| start_char = START_CHAR(tty); |
| retval = gb_tty_write(tty, &start_char, 1); |
| if (retval <= 0) |
| return; |
| } |
| |
| if (tty->termios.c_cflag & CRTSCTS) { |
| gb_tty->ctrlout |= GB_UART_CTRL_RTS; |
| retval = send_control(gb_tty, gb_tty->ctrlout); |
| } |
| } |
| |
| static int get_serial_info(struct tty_struct *tty, |
| struct serial_struct *ss) |
| { |
| struct gb_tty *gb_tty = tty->driver_data; |
| |
| ss->line = gb_tty->minor; |
| ss->close_delay = jiffies_to_msecs(gb_tty->port.close_delay) / 10; |
| ss->closing_wait = |
| gb_tty->port.closing_wait == ASYNC_CLOSING_WAIT_NONE ? |
| ASYNC_CLOSING_WAIT_NONE : |
| jiffies_to_msecs(gb_tty->port.closing_wait) / 10; |
| |
| return 0; |
| } |
| |
| static int set_serial_info(struct tty_struct *tty, |
| struct serial_struct *ss) |
| { |
| struct gb_tty *gb_tty = tty->driver_data; |
| unsigned int closing_wait; |
| unsigned int close_delay; |
| int retval = 0; |
| |
| close_delay = msecs_to_jiffies(ss->close_delay * 10); |
| closing_wait = ss->closing_wait == ASYNC_CLOSING_WAIT_NONE ? |
| ASYNC_CLOSING_WAIT_NONE : |
| msecs_to_jiffies(ss->closing_wait * 10); |
| |
| mutex_lock(&gb_tty->port.mutex); |
| if (!capable(CAP_SYS_ADMIN)) { |
| if ((close_delay != gb_tty->port.close_delay) || |
| (closing_wait != gb_tty->port.closing_wait)) |
| retval = -EPERM; |
| } else { |
| gb_tty->port.close_delay = close_delay; |
| gb_tty->port.closing_wait = closing_wait; |
| } |
| mutex_unlock(&gb_tty->port.mutex); |
| return retval; |
| } |
| |
| static int wait_serial_change(struct gb_tty *gb_tty, unsigned long arg) |
| { |
| int retval = 0; |
| DECLARE_WAITQUEUE(wait, current); |
| struct async_icount old; |
| struct async_icount new; |
| |
| if (!(arg & (TIOCM_DSR | TIOCM_RI | TIOCM_CD))) |
| return -EINVAL; |
| |
| do { |
| spin_lock_irq(&gb_tty->read_lock); |
| old = gb_tty->oldcount; |
| new = gb_tty->iocount; |
| gb_tty->oldcount = new; |
| spin_unlock_irq(&gb_tty->read_lock); |
| |
| if ((arg & TIOCM_DSR) && (old.dsr != new.dsr)) |
| break; |
| if ((arg & TIOCM_CD) && (old.dcd != new.dcd)) |
| break; |
| if ((arg & TIOCM_RI) && (old.rng != new.rng)) |
| break; |
| |
| add_wait_queue(&gb_tty->wioctl, &wait); |
| set_current_state(TASK_INTERRUPTIBLE); |
| schedule(); |
| remove_wait_queue(&gb_tty->wioctl, &wait); |
| if (gb_tty->disconnected) { |
| if (arg & TIOCM_CD) |
| break; |
| retval = -ENODEV; |
| } else if (signal_pending(current)) { |
| retval = -ERESTARTSYS; |
| } |
| } while (!retval); |
| |
| return retval; |
| } |
| |
| static int gb_tty_get_icount(struct tty_struct *tty, |
| struct serial_icounter_struct *icount) |
| { |
| struct gb_tty *gb_tty = tty->driver_data; |
| |
| icount->dsr = gb_tty->iocount.dsr; |
| icount->rng = gb_tty->iocount.rng; |
| icount->dcd = gb_tty->iocount.dcd; |
| icount->frame = gb_tty->iocount.frame; |
| icount->overrun = gb_tty->iocount.overrun; |
| icount->parity = gb_tty->iocount.parity; |
| icount->brk = gb_tty->iocount.brk; |
| |
| return 0; |
| } |
| |
| static int gb_tty_ioctl(struct tty_struct *tty, unsigned int cmd, |
| unsigned long arg) |
| { |
| struct gb_tty *gb_tty = tty->driver_data; |
| |
| switch (cmd) { |
| case TIOCMIWAIT: |
| return wait_serial_change(gb_tty, arg); |
| } |
| |
| return -ENOIOCTLCMD; |
| } |
| |
| static void gb_tty_dtr_rts(struct tty_port *port, bool active) |
| { |
| struct gb_tty *gb_tty; |
| u8 newctrl; |
| |
| gb_tty = container_of(port, struct gb_tty, port); |
| newctrl = gb_tty->ctrlout; |
| |
| if (active) |
| newctrl |= (GB_UART_CTRL_DTR | GB_UART_CTRL_RTS); |
| else |
| newctrl &= ~(GB_UART_CTRL_DTR | GB_UART_CTRL_RTS); |
| |
| gb_tty->ctrlout = newctrl; |
| send_control(gb_tty, newctrl); |
| } |
| |
| static int gb_tty_port_activate(struct tty_port *port, |
| struct tty_struct *tty) |
| { |
| struct gb_tty *gb_tty; |
| |
| gb_tty = container_of(port, struct gb_tty, port); |
| |
| return gbphy_runtime_get_sync(gb_tty->gbphy_dev); |
| } |
| |
| static void gb_tty_port_shutdown(struct tty_port *port) |
| { |
| struct gb_tty *gb_tty; |
| unsigned long flags; |
| int ret; |
| |
| gb_tty = container_of(port, struct gb_tty, port); |
| |
| gb_tty->close_pending = true; |
| |
| cancel_work_sync(&gb_tty->tx_work); |
| |
| spin_lock_irqsave(&gb_tty->write_lock, flags); |
| kfifo_reset_out(&gb_tty->write_fifo); |
| spin_unlock_irqrestore(&gb_tty->write_lock, flags); |
| |
| if (gb_tty->credits == GB_UART_FIRMWARE_CREDITS) |
| goto out; |
| |
| ret = gb_uart_flush(gb_tty, GB_SERIAL_FLAG_FLUSH_TRANSMITTER); |
| if (ret) { |
| dev_err(&gb_tty->gbphy_dev->dev, |
| "error flushing transmitter: %d\n", ret); |
| } |
| |
| gb_uart_wait_for_all_credits(gb_tty); |
| |
| out: |
| gb_tty->close_pending = false; |
| |
| gbphy_runtime_put_autosuspend(gb_tty->gbphy_dev); |
| } |
| |
| static void gb_tty_port_destruct(struct tty_port *port) |
| { |
| struct gb_tty *gb_tty = container_of(port, struct gb_tty, port); |
| |
| if (gb_tty->minor != GB_NUM_MINORS) |
| release_minor(gb_tty); |
| kfifo_free(&gb_tty->write_fifo); |
| kfree(gb_tty->buffer); |
| kfree(gb_tty); |
| } |
| |
| static const struct tty_operations gb_ops = { |
| .install = gb_tty_install, |
| .open = gb_tty_open, |
| .close = gb_tty_close, |
| .cleanup = gb_tty_cleanup, |
| .hangup = gb_tty_hangup, |
| .write = gb_tty_write, |
| .write_room = gb_tty_write_room, |
| .ioctl = gb_tty_ioctl, |
| .throttle = gb_tty_throttle, |
| .unthrottle = gb_tty_unthrottle, |
| .chars_in_buffer = gb_tty_chars_in_buffer, |
| .break_ctl = gb_tty_break_ctl, |
| .set_termios = gb_tty_set_termios, |
| .tiocmget = gb_tty_tiocmget, |
| .tiocmset = gb_tty_tiocmset, |
| .get_icount = gb_tty_get_icount, |
| .set_serial = set_serial_info, |
| .get_serial = get_serial_info, |
| }; |
| |
| static const struct tty_port_operations gb_port_ops = { |
| .dtr_rts = gb_tty_dtr_rts, |
| .activate = gb_tty_port_activate, |
| .shutdown = gb_tty_port_shutdown, |
| .destruct = gb_tty_port_destruct, |
| }; |
| |
| static int gb_uart_probe(struct gbphy_device *gbphy_dev, |
| const struct gbphy_device_id *id) |
| { |
| struct gb_connection *connection; |
| size_t max_payload; |
| struct gb_tty *gb_tty; |
| struct device *tty_dev; |
| int retval; |
| int minor; |
| |
| connection = gb_connection_create(gbphy_dev->bundle, |
| le16_to_cpu(gbphy_dev->cport_desc->id), |
| gb_uart_request_handler); |
| if (IS_ERR(connection)) |
| return PTR_ERR(connection); |
| |
| max_payload = gb_operation_get_payload_size_max(connection); |
| if (max_payload < sizeof(struct gb_uart_send_data_request)) { |
| retval = -EINVAL; |
| goto exit_connection_destroy; |
| } |
| |
| gb_tty = kzalloc(sizeof(*gb_tty), GFP_KERNEL); |
| if (!gb_tty) { |
| retval = -ENOMEM; |
| goto exit_connection_destroy; |
| } |
| |
| tty_port_init(&gb_tty->port); |
| gb_tty->port.ops = &gb_port_ops; |
| gb_tty->minor = GB_NUM_MINORS; |
| |
| gb_tty->buffer_payload_max = max_payload - |
| sizeof(struct gb_uart_send_data_request); |
| |
| gb_tty->buffer = kzalloc(gb_tty->buffer_payload_max, GFP_KERNEL); |
| if (!gb_tty->buffer) { |
| retval = -ENOMEM; |
| goto exit_put_port; |
| } |
| |
| INIT_WORK(&gb_tty->tx_work, gb_uart_tx_write_work); |
| |
| retval = kfifo_alloc(&gb_tty->write_fifo, GB_UART_WRITE_FIFO_SIZE, |
| GFP_KERNEL); |
| if (retval) |
| goto exit_put_port; |
| |
| gb_tty->credits = GB_UART_FIRMWARE_CREDITS; |
| init_completion(&gb_tty->credits_complete); |
| |
| minor = alloc_minor(gb_tty); |
| if (minor < 0) { |
| if (minor == -ENOSPC) { |
| dev_err(&gbphy_dev->dev, |
| "no more free minor numbers\n"); |
| retval = -ENODEV; |
| } else { |
| retval = minor; |
| } |
| goto exit_put_port; |
| } |
| |
| gb_tty->minor = minor; |
| spin_lock_init(&gb_tty->write_lock); |
| spin_lock_init(&gb_tty->read_lock); |
| init_waitqueue_head(&gb_tty->wioctl); |
| mutex_init(&gb_tty->mutex); |
| |
| gb_tty->connection = connection; |
| gb_tty->gbphy_dev = gbphy_dev; |
| gb_connection_set_data(connection, gb_tty); |
| gb_gbphy_set_data(gbphy_dev, gb_tty); |
| |
| retval = gb_connection_enable_tx(connection); |
| if (retval) |
| goto exit_put_port; |
| |
| send_control(gb_tty, gb_tty->ctrlout); |
| |
| /* initialize the uart to be 9600n81 */ |
| gb_tty->line_coding.rate = cpu_to_le32(9600); |
| gb_tty->line_coding.format = GB_SERIAL_1_STOP_BITS; |
| gb_tty->line_coding.parity = GB_SERIAL_NO_PARITY; |
| gb_tty->line_coding.data_bits = 8; |
| send_line_coding(gb_tty); |
| |
| retval = gb_connection_enable(connection); |
| if (retval) |
| goto exit_connection_disable; |
| |
| tty_dev = tty_port_register_device(&gb_tty->port, gb_tty_driver, minor, |
| &gbphy_dev->dev); |
| if (IS_ERR(tty_dev)) { |
| retval = PTR_ERR(tty_dev); |
| goto exit_connection_disable; |
| } |
| |
| gbphy_runtime_put_autosuspend(gbphy_dev); |
| return 0; |
| |
| exit_connection_disable: |
| gb_connection_disable(connection); |
| exit_put_port: |
| tty_port_put(&gb_tty->port); |
| exit_connection_destroy: |
| gb_connection_destroy(connection); |
| |
| return retval; |
| } |
| |
| static void gb_uart_remove(struct gbphy_device *gbphy_dev) |
| { |
| struct gb_tty *gb_tty = gb_gbphy_get_data(gbphy_dev); |
| struct gb_connection *connection = gb_tty->connection; |
| struct tty_struct *tty; |
| int ret; |
| |
| ret = gbphy_runtime_get_sync(gbphy_dev); |
| if (ret) |
| gbphy_runtime_get_noresume(gbphy_dev); |
| |
| mutex_lock(&gb_tty->mutex); |
| gb_tty->disconnected = true; |
| |
| wake_up_all(&gb_tty->wioctl); |
| mutex_unlock(&gb_tty->mutex); |
| |
| tty = tty_port_tty_get(&gb_tty->port); |
| if (tty) { |
| tty_vhangup(tty); |
| tty_kref_put(tty); |
| } |
| |
| gb_connection_disable_rx(connection); |
| tty_unregister_device(gb_tty_driver, gb_tty->minor); |
| |
| gb_connection_disable(connection); |
| gb_connection_destroy(connection); |
| |
| tty_port_put(&gb_tty->port); |
| } |
| |
| static int gb_tty_init(void) |
| { |
| int retval = 0; |
| |
| gb_tty_driver = tty_alloc_driver(GB_NUM_MINORS, 0); |
| if (IS_ERR(gb_tty_driver)) { |
| pr_err("Can not allocate tty driver\n"); |
| retval = -ENOMEM; |
| goto fail_unregister_dev; |
| } |
| |
| gb_tty_driver->driver_name = "gb"; |
| gb_tty_driver->name = GB_NAME; |
| gb_tty_driver->major = 0; |
| gb_tty_driver->minor_start = 0; |
| gb_tty_driver->type = TTY_DRIVER_TYPE_SERIAL; |
| gb_tty_driver->subtype = SERIAL_TYPE_NORMAL; |
| gb_tty_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV; |
| gb_tty_driver->init_termios = tty_std_termios; |
| gb_tty_driver->init_termios.c_cflag = B9600 | CS8 | |
| CREAD | HUPCL | CLOCAL; |
| tty_set_operations(gb_tty_driver, &gb_ops); |
| |
| retval = tty_register_driver(gb_tty_driver); |
| if (retval) { |
| pr_err("Can not register tty driver: %d\n", retval); |
| goto fail_put_gb_tty; |
| } |
| |
| return 0; |
| |
| fail_put_gb_tty: |
| tty_driver_kref_put(gb_tty_driver); |
| fail_unregister_dev: |
| return retval; |
| } |
| |
| static void gb_tty_exit(void) |
| { |
| tty_unregister_driver(gb_tty_driver); |
| tty_driver_kref_put(gb_tty_driver); |
| idr_destroy(&tty_minors); |
| } |
| |
| static const struct gbphy_device_id gb_uart_id_table[] = { |
| { GBPHY_PROTOCOL(GREYBUS_PROTOCOL_UART) }, |
| { }, |
| }; |
| MODULE_DEVICE_TABLE(gbphy, gb_uart_id_table); |
| |
| static struct gbphy_driver uart_driver = { |
| .name = "uart", |
| .probe = gb_uart_probe, |
| .remove = gb_uart_remove, |
| .id_table = gb_uart_id_table, |
| }; |
| |
| static int gb_uart_driver_init(void) |
| { |
| int ret; |
| |
| ret = gb_tty_init(); |
| if (ret) |
| return ret; |
| |
| ret = gb_gbphy_register(&uart_driver); |
| if (ret) { |
| gb_tty_exit(); |
| return ret; |
| } |
| |
| return 0; |
| } |
| module_init(gb_uart_driver_init); |
| |
| static void gb_uart_driver_exit(void) |
| { |
| gb_gbphy_deregister(&uart_driver); |
| gb_tty_exit(); |
| } |
| |
| module_exit(gb_uart_driver_exit); |
| MODULE_DESCRIPTION("UART driver for the Greybus 'generic' UART module"); |
| MODULE_LICENSE("GPL v2"); |