blob: 71f98cc03eed64afd62acfaa4cc282c3d96834eb [file] [log] [blame]
/* Driver for Realtek PCI-Express card reader
* Header file
*
* Copyright(c) 2009-2013 Realtek Semiconductor Corp. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2, or (at your option) any
* later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, see <http://www.gnu.org/licenses/>.
*
* Author:
* Wei WANG (wei_wang@realsil.com.cn)
* Micky Ching (micky_ching@realsil.com.cn)
*/
#ifndef __REALTEK_RTSX_MS_H
#define __REALTEK_RTSX_MS_H
#define MS_DELAY_WRITE
#define MS_MAX_RETRY_COUNT 3
#define MS_EXTRA_SIZE 0x9
#define WRT_PRTCT 0x01
/* Error Code */
#define MS_NO_ERROR 0x00
#define MS_CRC16_ERROR 0x80
#define MS_TO_ERROR 0x40
#define MS_NO_CARD 0x20
#define MS_NO_MEMORY 0x10
#define MS_CMD_NK 0x08
#define MS_FLASH_READ_ERROR 0x04
#define MS_FLASH_WRITE_ERROR 0x02
#define MS_BREQ_ERROR 0x01
#define MS_NOT_FOUND 0x03
/* Transfer Protocol Command */
#define READ_PAGE_DATA 0x02
#define READ_REG 0x04
#define GET_INT 0x07
#define WRITE_PAGE_DATA 0x0D
#define WRITE_REG 0x0B
#define SET_RW_REG_ADRS 0x08
#define SET_CMD 0x0E
#define PRO_READ_LONG_DATA 0x02
#define PRO_READ_SHORT_DATA 0x03
#define PRO_READ_REG 0x04
#define PRO_READ_QUAD_DATA 0x05
#define PRO_GET_INT 0x07
#define PRO_WRITE_LONG_DATA 0x0D
#define PRO_WRITE_SHORT_DATA 0x0C
#define PRO_WRITE_QUAD_DATA 0x0A
#define PRO_WRITE_REG 0x0B
#define PRO_SET_RW_REG_ADRS 0x08
#define PRO_SET_CMD 0x0E
#define PRO_EX_SET_CMD 0x09
#ifdef SUPPORT_MAGIC_GATE
#define MG_GET_ID 0x40
#define MG_SET_LID 0x41
#define MG_GET_LEKB 0x42
#define MG_SET_RD 0x43
#define MG_MAKE_RMS 0x44
#define MG_MAKE_KSE 0x45
#define MG_SET_IBD 0x46
#define MG_GET_IBD 0x47
#endif
#ifdef XC_POWERCLASS
#define XC_CHG_POWER 0x16
#endif
#define BLOCK_READ 0xAA
#define BLOCK_WRITE 0x55
#define BLOCK_END 0x33
#define BLOCK_ERASE 0x99
#define FLASH_STOP 0xCC
#define SLEEP 0x5A
#define CLEAR_BUF 0xC3
#define MS_RESET 0x3C
#define PRO_READ_DATA 0x20
#define PRO_WRITE_DATA 0x21
#define PRO_READ_ATRB 0x24
#define PRO_STOP 0x25
#define PRO_ERASE 0x26
#define PRO_READ_2K_DATA 0x27
#define PRO_WRITE_2K_DATA 0x28
#define PRO_FORMAT 0x10
#define PRO_SLEEP 0x11
#define IntReg 0x01
#define StatusReg0 0x02
#define StatusReg1 0x03
#define SystemParm 0x10
#define BlockAdrs 0x11
#define CMDParm 0x14
#define PageAdrs 0x15
#define OverwriteFlag 0x16
#define ManagemenFlag 0x17
#define LogicalAdrs 0x18
#define ReserveArea 0x1A
#define Pro_IntReg 0x01
#define Pro_StatusReg 0x02
#define Pro_TypeReg 0x04
#define Pro_IFModeReg 0x05
#define Pro_CatagoryReg 0x06
#define Pro_ClassReg 0x07
#define Pro_SystemParm 0x10
#define Pro_DataCount1 0x11
#define Pro_DataCount0 0x12
#define Pro_DataAddr3 0x13
#define Pro_DataAddr2 0x14
#define Pro_DataAddr1 0x15
#define Pro_DataAddr0 0x16
#define Pro_TPCParm 0x17
#define Pro_CMDParm 0x18
#define INT_REG_CED 0x80
#define INT_REG_ERR 0x40
#define INT_REG_BREQ 0x20
#define INT_REG_CMDNK 0x01
#define BLOCK_BOOT 0xC0
#define BLOCK_OK 0x80
#define PAGE_OK 0x60
#define DATA_COMPL 0x10
#define NOT_BOOT_BLOCK 0x4
#define NOT_TRANSLATION_TABLE 0x8
#define HEADER_ID0 PPBUF_BASE2
#define HEADER_ID1 (PPBUF_BASE2 + 1)
#define DISABLED_BLOCK0 (PPBUF_BASE2 + 0x170 + 4)
#define DISABLED_BLOCK1 (PPBUF_BASE2 + 0x170 + 5)
#define DISABLED_BLOCK2 (PPBUF_BASE2 + 0x170 + 6)
#define DISABLED_BLOCK3 (PPBUF_BASE2 + 0x170 + 7)
#define BLOCK_SIZE_0 (PPBUF_BASE2 + 0x1a0 + 2)
#define BLOCK_SIZE_1 (PPBUF_BASE2 + 0x1a0 + 3)
#define BLOCK_COUNT_0 (PPBUF_BASE2 + 0x1a0 + 4)
#define BLOCK_COUNT_1 (PPBUF_BASE2 + 0x1a0 + 5)
#define EBLOCK_COUNT_0 (PPBUF_BASE2 + 0x1a0 + 6)
#define EBLOCK_COUNT_1 (PPBUF_BASE2 + 0x1a0 + 7)
#define PAGE_SIZE_0 (PPBUF_BASE2 + 0x1a0 + 8)
#define PAGE_SIZE_1 (PPBUF_BASE2 + 0x1a0 + 9)
#define MS_Device_Type (PPBUF_BASE2 + 0x1D8)
#define MS_4bit_Support (PPBUF_BASE2 + 0x1D3)
#define setPS_NG 1
#define setPS_Error 0
#define PARALLEL_8BIT_IF 0x40
#define PARALLEL_4BIT_IF 0x00
#define SERIAL_IF 0x80
#define BUF_FULL 0x10
#define BUF_EMPTY 0x20
#define MEDIA_BUSY 0x80
#define FLASH_BUSY 0x40
#define DATA_ERROR 0x20
#define STS_UCDT 0x10
#define EXTRA_ERROR 0x08
#define STS_UCEX 0x04
#define FLAG_ERROR 0x02
#define STS_UCFG 0x01
#define MS_SHORT_DATA_LEN 32
#define FORMAT_SUCCESS 0
#define FORMAT_FAIL 1
#define FORMAT_IN_PROGRESS 2
#define MS_SET_BAD_BLOCK_FLG(ms_card) ((ms_card)->multi_flag |= 0x80)
#define MS_CLR_BAD_BLOCK_FLG(ms_card) ((ms_card)->multi_flag &= 0x7F)
#define MS_TST_BAD_BLOCK_FLG(ms_card) ((ms_card)->multi_flag & 0x80)
void mspro_polling_format_status(struct rtsx_chip *chip);
void mspro_stop_seq_mode(struct rtsx_chip *chip);
int reset_ms_card(struct rtsx_chip *chip);
int ms_rw(struct scsi_cmnd *srb, struct rtsx_chip *chip,
u32 start_sector, u16 sector_cnt);
int mspro_format(struct scsi_cmnd *srb, struct rtsx_chip *chip,
int short_data_len, bool quick_format);
void ms_free_l2p_tbl(struct rtsx_chip *chip);
void ms_cleanup_work(struct rtsx_chip *chip);
int ms_power_off_card3v3(struct rtsx_chip *chip);
int release_ms_card(struct rtsx_chip *chip);
#ifdef MS_DELAY_WRITE
int ms_delay_write(struct rtsx_chip *chip);
#endif
#ifdef SUPPORT_MAGIC_GATE
int mg_set_leaf_id(struct scsi_cmnd *srb, struct rtsx_chip *chip);
int mg_get_local_EKB(struct scsi_cmnd *srb, struct rtsx_chip *chip);
int mg_chg(struct scsi_cmnd *srb, struct rtsx_chip *chip);
int mg_get_rsp_chg(struct scsi_cmnd *srb, struct rtsx_chip *chip);
int mg_rsp(struct scsi_cmnd *srb, struct rtsx_chip *chip);
int mg_get_ICV(struct scsi_cmnd *srb, struct rtsx_chip *chip);
int mg_set_ICV(struct scsi_cmnd *srb, struct rtsx_chip *chip);
#endif
#endif /* __REALTEK_RTSX_MS_H */