| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * wm8958-dsp2.c -- WM8958 DSP2 support |
| * |
| * Copyright 2011 Wolfson Microelectronics plc |
| * |
| * Author: Mark Brown <broonie@opensource.wolfsonmicro.com> |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/moduleparam.h> |
| #include <linux/init.h> |
| #include <linux/delay.h> |
| #include <linux/pm.h> |
| #include <linux/i2c.h> |
| #include <linux/platform_device.h> |
| #include <linux/slab.h> |
| #include <sound/soc.h> |
| #include <sound/initval.h> |
| #include <sound/tlv.h> |
| #include <trace/events/asoc.h> |
| |
| #include <linux/mfd/wm8994/core.h> |
| #include <linux/mfd/wm8994/registers.h> |
| #include <linux/mfd/wm8994/pdata.h> |
| #include <linux/mfd/wm8994/gpio.h> |
| |
| #include <asm/unaligned.h> |
| |
| #include "wm8994.h" |
| |
| #define WM_FW_BLOCK_INFO 0xff |
| #define WM_FW_BLOCK_PM 0x00 |
| #define WM_FW_BLOCK_X 0x01 |
| #define WM_FW_BLOCK_Y 0x02 |
| #define WM_FW_BLOCK_Z 0x03 |
| #define WM_FW_BLOCK_I 0x06 |
| #define WM_FW_BLOCK_A 0x08 |
| #define WM_FW_BLOCK_C 0x0c |
| |
| static int wm8958_dsp2_fw(struct snd_soc_component *component, const char *name, |
| const struct firmware *fw, bool check) |
| { |
| struct wm8994_priv *wm8994 = snd_soc_component_get_drvdata(component); |
| u64 data64; |
| u32 data32; |
| const u8 *data; |
| char *str; |
| size_t block_len, len; |
| int ret = 0; |
| |
| /* Suppress unneeded downloads */ |
| if (wm8994->cur_fw == fw) |
| return 0; |
| |
| if (fw->size < 32) { |
| dev_err(component->dev, "%s: firmware too short (%zd bytes)\n", |
| name, fw->size); |
| goto err; |
| } |
| |
| if (memcmp(fw->data, "WMFW", 4) != 0) { |
| data32 = get_unaligned_be32(fw->data); |
| dev_err(component->dev, "%s: firmware has bad file magic %08x\n", |
| name, data32); |
| goto err; |
| } |
| |
| len = get_unaligned_be32(fw->data + 4); |
| data32 = get_unaligned_be32(fw->data + 8); |
| |
| if ((data32 >> 24) & 0xff) { |
| dev_err(component->dev, "%s: unsupported firmware version %d\n", |
| name, (data32 >> 24) & 0xff); |
| goto err; |
| } |
| if ((data32 & 0xffff) != 8958) { |
| dev_err(component->dev, "%s: unsupported target device %d\n", |
| name, data32 & 0xffff); |
| goto err; |
| } |
| if (((data32 >> 16) & 0xff) != 0xc) { |
| dev_err(component->dev, "%s: unsupported target core %d\n", |
| name, (data32 >> 16) & 0xff); |
| goto err; |
| } |
| |
| if (check) { |
| data64 = get_unaligned_be64(fw->data + 24); |
| dev_info(component->dev, "%s timestamp %llx\n", name, data64); |
| } else { |
| snd_soc_component_write(component, 0x102, 0x2); |
| snd_soc_component_write(component, 0x900, 0x2); |
| } |
| |
| data = fw->data + len; |
| len = fw->size - len; |
| while (len) { |
| if (len < 12) { |
| dev_err(component->dev, "%s short data block of %zd\n", |
| name, len); |
| goto err; |
| } |
| |
| block_len = get_unaligned_be32(data + 4); |
| if (block_len + 8 > len) { |
| dev_err(component->dev, "%zd byte block longer than file\n", |
| block_len); |
| goto err; |
| } |
| if (block_len == 0) { |
| dev_err(component->dev, "Zero length block\n"); |
| goto err; |
| } |
| |
| data32 = get_unaligned_be32(data); |
| |
| switch ((data32 >> 24) & 0xff) { |
| case WM_FW_BLOCK_INFO: |
| /* Informational text */ |
| if (!check) |
| break; |
| |
| str = kzalloc(block_len + 1, GFP_KERNEL); |
| if (str) { |
| memcpy(str, data + 8, block_len); |
| dev_info(component->dev, "%s: %s\n", name, str); |
| kfree(str); |
| } else { |
| dev_err(component->dev, "Out of memory\n"); |
| } |
| break; |
| case WM_FW_BLOCK_PM: |
| case WM_FW_BLOCK_X: |
| case WM_FW_BLOCK_Y: |
| case WM_FW_BLOCK_Z: |
| case WM_FW_BLOCK_I: |
| case WM_FW_BLOCK_A: |
| case WM_FW_BLOCK_C: |
| dev_dbg(component->dev, "%s: %zd bytes of %x@%x\n", name, |
| block_len, (data32 >> 24) & 0xff, |
| data32 & 0xffffff); |
| |
| if (check) |
| break; |
| |
| data32 &= 0xffffff; |
| |
| wm8994_bulk_write(wm8994->wm8994, |
| data32 & 0xffffff, |
| block_len / 2, |
| (void *)(data + 8)); |
| |
| break; |
| default: |
| dev_warn(component->dev, "%s: unknown block type %d\n", |
| name, (data32 >> 24) & 0xff); |
| break; |
| } |
| |
| /* Round up to the next 32 bit word */ |
| block_len += block_len % 4; |
| |
| data += block_len + 8; |
| len -= block_len + 8; |
| } |
| |
| if (!check) { |
| dev_dbg(component->dev, "%s: download done\n", name); |
| wm8994->cur_fw = fw; |
| } else { |
| dev_info(component->dev, "%s: got firmware\n", name); |
| } |
| |
| goto ok; |
| |
| err: |
| ret = -EINVAL; |
| ok: |
| if (!check) { |
| snd_soc_component_write(component, 0x900, 0x0); |
| snd_soc_component_write(component, 0x102, 0x0); |
| } |
| |
| return ret; |
| } |
| |
| static void wm8958_dsp_start_mbc(struct snd_soc_component *component, int path) |
| { |
| struct wm8994_priv *wm8994 = snd_soc_component_get_drvdata(component); |
| struct wm8994 *control = wm8994->wm8994; |
| int i; |
| |
| /* If the DSP is already running then noop */ |
| if (snd_soc_component_read(component, WM8958_DSP2_PROGRAM) & WM8958_DSP2_ENA) |
| return; |
| |
| /* If we have MBC firmware download it */ |
| if (wm8994->mbc) |
| wm8958_dsp2_fw(component, "MBC", wm8994->mbc, false); |
| |
| snd_soc_component_update_bits(component, WM8958_DSP2_PROGRAM, |
| WM8958_DSP2_ENA, WM8958_DSP2_ENA); |
| |
| /* If we've got user supplied MBC settings use them */ |
| if (control->pdata.num_mbc_cfgs) { |
| struct wm8958_mbc_cfg *cfg |
| = &control->pdata.mbc_cfgs[wm8994->mbc_cfg]; |
| |
| for (i = 0; i < ARRAY_SIZE(cfg->coeff_regs); i++) |
| snd_soc_component_write(component, i + WM8958_MBC_BAND_1_K_1, |
| cfg->coeff_regs[i]); |
| |
| for (i = 0; i < ARRAY_SIZE(cfg->cutoff_regs); i++) |
| snd_soc_component_write(component, |
| i + WM8958_MBC_BAND_2_LOWER_CUTOFF_C1_1, |
| cfg->cutoff_regs[i]); |
| } |
| |
| /* Run the DSP */ |
| snd_soc_component_write(component, WM8958_DSP2_EXECCONTROL, |
| WM8958_DSP2_RUNR); |
| |
| /* And we're off! */ |
| snd_soc_component_update_bits(component, WM8958_DSP2_CONFIG, |
| WM8958_MBC_ENA | |
| WM8958_MBC_SEL_MASK, |
| path << WM8958_MBC_SEL_SHIFT | |
| WM8958_MBC_ENA); |
| } |
| |
| static void wm8958_dsp_start_vss(struct snd_soc_component *component, int path) |
| { |
| struct wm8994_priv *wm8994 = snd_soc_component_get_drvdata(component); |
| struct wm8994 *control = wm8994->wm8994; |
| int i, ena; |
| |
| if (wm8994->mbc_vss) |
| wm8958_dsp2_fw(component, "MBC+VSS", wm8994->mbc_vss, false); |
| |
| snd_soc_component_update_bits(component, WM8958_DSP2_PROGRAM, |
| WM8958_DSP2_ENA, WM8958_DSP2_ENA); |
| |
| /* If we've got user supplied settings use them */ |
| if (control->pdata.num_mbc_cfgs) { |
| struct wm8958_mbc_cfg *cfg |
| = &control->pdata.mbc_cfgs[wm8994->mbc_cfg]; |
| |
| for (i = 0; i < ARRAY_SIZE(cfg->combined_regs); i++) |
| snd_soc_component_write(component, i + 0x2800, |
| cfg->combined_regs[i]); |
| } |
| |
| if (control->pdata.num_vss_cfgs) { |
| struct wm8958_vss_cfg *cfg |
| = &control->pdata.vss_cfgs[wm8994->vss_cfg]; |
| |
| for (i = 0; i < ARRAY_SIZE(cfg->regs); i++) |
| snd_soc_component_write(component, i + 0x2600, cfg->regs[i]); |
| } |
| |
| if (control->pdata.num_vss_hpf_cfgs) { |
| struct wm8958_vss_hpf_cfg *cfg |
| = &control->pdata.vss_hpf_cfgs[wm8994->vss_hpf_cfg]; |
| |
| for (i = 0; i < ARRAY_SIZE(cfg->regs); i++) |
| snd_soc_component_write(component, i + 0x2400, cfg->regs[i]); |
| } |
| |
| /* Run the DSP */ |
| snd_soc_component_write(component, WM8958_DSP2_EXECCONTROL, |
| WM8958_DSP2_RUNR); |
| |
| /* Enable the algorithms we've selected */ |
| ena = 0; |
| if (wm8994->mbc_ena[path]) |
| ena |= 0x8; |
| if (wm8994->hpf2_ena[path]) |
| ena |= 0x4; |
| if (wm8994->hpf1_ena[path]) |
| ena |= 0x2; |
| if (wm8994->vss_ena[path]) |
| ena |= 0x1; |
| |
| snd_soc_component_write(component, 0x2201, ena); |
| |
| /* Switch the DSP into the data path */ |
| snd_soc_component_update_bits(component, WM8958_DSP2_CONFIG, |
| WM8958_MBC_SEL_MASK | WM8958_MBC_ENA, |
| path << WM8958_MBC_SEL_SHIFT | WM8958_MBC_ENA); |
| } |
| |
| static void wm8958_dsp_start_enh_eq(struct snd_soc_component *component, int path) |
| { |
| struct wm8994_priv *wm8994 = snd_soc_component_get_drvdata(component); |
| struct wm8994 *control = wm8994->wm8994; |
| int i; |
| |
| wm8958_dsp2_fw(component, "ENH_EQ", wm8994->enh_eq, false); |
| |
| snd_soc_component_update_bits(component, WM8958_DSP2_PROGRAM, |
| WM8958_DSP2_ENA, WM8958_DSP2_ENA); |
| |
| /* If we've got user supplied settings use them */ |
| if (control->pdata.num_enh_eq_cfgs) { |
| struct wm8958_enh_eq_cfg *cfg |
| = &control->pdata.enh_eq_cfgs[wm8994->enh_eq_cfg]; |
| |
| for (i = 0; i < ARRAY_SIZE(cfg->regs); i++) |
| snd_soc_component_write(component, i + 0x2200, |
| cfg->regs[i]); |
| } |
| |
| /* Run the DSP */ |
| snd_soc_component_write(component, WM8958_DSP2_EXECCONTROL, |
| WM8958_DSP2_RUNR); |
| |
| /* Switch the DSP into the data path */ |
| snd_soc_component_update_bits(component, WM8958_DSP2_CONFIG, |
| WM8958_MBC_SEL_MASK | WM8958_MBC_ENA, |
| path << WM8958_MBC_SEL_SHIFT | WM8958_MBC_ENA); |
| } |
| |
| static void wm8958_dsp_apply(struct snd_soc_component *component, int path, int start) |
| { |
| struct wm8994_priv *wm8994 = snd_soc_component_get_drvdata(component); |
| int pwr_reg = snd_soc_component_read(component, WM8994_POWER_MANAGEMENT_5); |
| int ena, reg, aif; |
| |
| switch (path) { |
| case 0: |
| pwr_reg &= (WM8994_AIF1DAC1L_ENA | WM8994_AIF1DAC1R_ENA); |
| aif = 0; |
| break; |
| case 1: |
| pwr_reg &= (WM8994_AIF1DAC2L_ENA | WM8994_AIF1DAC2R_ENA); |
| aif = 0; |
| break; |
| case 2: |
| pwr_reg &= (WM8994_AIF2DACL_ENA | WM8994_AIF2DACR_ENA); |
| aif = 1; |
| break; |
| default: |
| WARN(1, "Invalid path %d\n", path); |
| return; |
| } |
| |
| /* Do we have both an active AIF and an active algorithm? */ |
| ena = wm8994->mbc_ena[path] || wm8994->vss_ena[path] || |
| wm8994->hpf1_ena[path] || wm8994->hpf2_ena[path] || |
| wm8994->enh_eq_ena[path]; |
| if (!pwr_reg) |
| ena = 0; |
| |
| reg = snd_soc_component_read(component, WM8958_DSP2_PROGRAM); |
| |
| dev_dbg(component->dev, "DSP path %d %d startup: %d, power: %x, DSP: %x\n", |
| path, wm8994->dsp_active, start, pwr_reg, reg); |
| |
| if (start && ena) { |
| /* If the DSP is already running then noop */ |
| if (reg & WM8958_DSP2_ENA) |
| return; |
| |
| /* If either AIFnCLK is not yet enabled postpone */ |
| if (!(snd_soc_component_read(component, WM8994_AIF1_CLOCKING_1) |
| & WM8994_AIF1CLK_ENA_MASK) && |
| !(snd_soc_component_read(component, WM8994_AIF2_CLOCKING_1) |
| & WM8994_AIF2CLK_ENA_MASK)) |
| return; |
| |
| /* Switch the clock over to the appropriate AIF */ |
| snd_soc_component_update_bits(component, WM8994_CLOCKING_1, |
| WM8958_DSP2CLK_SRC | WM8958_DSP2CLK_ENA, |
| aif << WM8958_DSP2CLK_SRC_SHIFT | |
| WM8958_DSP2CLK_ENA); |
| |
| if (wm8994->enh_eq_ena[path]) |
| wm8958_dsp_start_enh_eq(component, path); |
| else if (wm8994->vss_ena[path] || wm8994->hpf1_ena[path] || |
| wm8994->hpf2_ena[path]) |
| wm8958_dsp_start_vss(component, path); |
| else if (wm8994->mbc_ena[path]) |
| wm8958_dsp_start_mbc(component, path); |
| |
| wm8994->dsp_active = path; |
| |
| dev_dbg(component->dev, "DSP running in path %d\n", path); |
| } |
| |
| if (!start && wm8994->dsp_active == path) { |
| /* If the DSP is already stopped then noop */ |
| if (!(reg & WM8958_DSP2_ENA)) |
| return; |
| |
| snd_soc_component_update_bits(component, WM8958_DSP2_CONFIG, |
| WM8958_MBC_ENA, 0); |
| snd_soc_component_write(component, WM8958_DSP2_EXECCONTROL, |
| WM8958_DSP2_STOP); |
| snd_soc_component_update_bits(component, WM8958_DSP2_PROGRAM, |
| WM8958_DSP2_ENA, 0); |
| snd_soc_component_update_bits(component, WM8994_CLOCKING_1, |
| WM8958_DSP2CLK_ENA, 0); |
| |
| wm8994->dsp_active = -1; |
| |
| dev_dbg(component->dev, "DSP stopped\n"); |
| } |
| } |
| |
| int wm8958_aif_ev(struct snd_soc_dapm_widget *w, |
| struct snd_kcontrol *kcontrol, int event) |
| { |
| struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm); |
| struct wm8994 *control = dev_get_drvdata(component->dev->parent); |
| int i; |
| |
| if (control->type != WM8958) |
| return 0; |
| |
| switch (event) { |
| case SND_SOC_DAPM_POST_PMU: |
| case SND_SOC_DAPM_PRE_PMU: |
| for (i = 0; i < 3; i++) |
| wm8958_dsp_apply(component, i, 1); |
| break; |
| case SND_SOC_DAPM_POST_PMD: |
| case SND_SOC_DAPM_PRE_PMD: |
| for (i = 0; i < 3; i++) |
| wm8958_dsp_apply(component, i, 0); |
| break; |
| } |
| |
| return 0; |
| } |
| |
| /* Check if DSP2 is in use on another AIF */ |
| static int wm8958_dsp2_busy(struct wm8994_priv *wm8994, int aif) |
| { |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(wm8994->mbc_ena); i++) { |
| if (i == aif) |
| continue; |
| if (wm8994->mbc_ena[i] || wm8994->vss_ena[i] || |
| wm8994->hpf1_ena[i] || wm8994->hpf2_ena[i]) |
| return 1; |
| } |
| |
| return 0; |
| } |
| |
| static int wm8958_put_mbc_enum(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol); |
| struct wm8994_priv *wm8994 = snd_soc_component_get_drvdata(component); |
| struct wm8994 *control = wm8994->wm8994; |
| int value = ucontrol->value.enumerated.item[0]; |
| int reg; |
| |
| /* Don't allow on the fly reconfiguration */ |
| reg = snd_soc_component_read(component, WM8994_CLOCKING_1); |
| if (reg < 0 || reg & WM8958_DSP2CLK_ENA) |
| return -EBUSY; |
| |
| if (value >= control->pdata.num_mbc_cfgs) |
| return -EINVAL; |
| |
| wm8994->mbc_cfg = value; |
| |
| return 0; |
| } |
| |
| static int wm8958_get_mbc_enum(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol); |
| struct wm8994_priv *wm8994 = snd_soc_component_get_drvdata(component); |
| |
| ucontrol->value.enumerated.item[0] = wm8994->mbc_cfg; |
| |
| return 0; |
| } |
| |
| static int wm8958_mbc_info(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_info *uinfo) |
| { |
| uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN; |
| uinfo->count = 1; |
| uinfo->value.integer.min = 0; |
| uinfo->value.integer.max = 1; |
| return 0; |
| } |
| |
| static int wm8958_mbc_get(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| int mbc = kcontrol->private_value; |
| struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol); |
| struct wm8994_priv *wm8994 = snd_soc_component_get_drvdata(component); |
| |
| ucontrol->value.integer.value[0] = wm8994->mbc_ena[mbc]; |
| |
| return 0; |
| } |
| |
| static int wm8958_mbc_put(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| int mbc = kcontrol->private_value; |
| struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol); |
| struct wm8994_priv *wm8994 = snd_soc_component_get_drvdata(component); |
| |
| if (wm8994->mbc_ena[mbc] == ucontrol->value.integer.value[0]) |
| return 0; |
| |
| if (ucontrol->value.integer.value[0] > 1) |
| return -EINVAL; |
| |
| if (wm8958_dsp2_busy(wm8994, mbc)) { |
| dev_dbg(component->dev, "DSP2 active on %d already\n", mbc); |
| return -EBUSY; |
| } |
| |
| if (wm8994->enh_eq_ena[mbc]) |
| return -EBUSY; |
| |
| wm8994->mbc_ena[mbc] = ucontrol->value.integer.value[0]; |
| |
| wm8958_dsp_apply(component, mbc, wm8994->mbc_ena[mbc]); |
| |
| return 0; |
| } |
| |
| #define WM8958_MBC_SWITCH(xname, xval) {\ |
| .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = (xname), \ |
| .access = SNDRV_CTL_ELEM_ACCESS_READWRITE,\ |
| .info = wm8958_mbc_info, \ |
| .get = wm8958_mbc_get, .put = wm8958_mbc_put, \ |
| .private_value = xval } |
| |
| static int wm8958_put_vss_enum(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol); |
| struct wm8994_priv *wm8994 = snd_soc_component_get_drvdata(component); |
| struct wm8994 *control = wm8994->wm8994; |
| int value = ucontrol->value.enumerated.item[0]; |
| int reg; |
| |
| /* Don't allow on the fly reconfiguration */ |
| reg = snd_soc_component_read(component, WM8994_CLOCKING_1); |
| if (reg < 0 || reg & WM8958_DSP2CLK_ENA) |
| return -EBUSY; |
| |
| if (value >= control->pdata.num_vss_cfgs) |
| return -EINVAL; |
| |
| wm8994->vss_cfg = value; |
| |
| return 0; |
| } |
| |
| static int wm8958_get_vss_enum(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol); |
| struct wm8994_priv *wm8994 = snd_soc_component_get_drvdata(component); |
| |
| ucontrol->value.enumerated.item[0] = wm8994->vss_cfg; |
| |
| return 0; |
| } |
| |
| static int wm8958_put_vss_hpf_enum(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol); |
| struct wm8994_priv *wm8994 = snd_soc_component_get_drvdata(component); |
| struct wm8994 *control = wm8994->wm8994; |
| int value = ucontrol->value.enumerated.item[0]; |
| int reg; |
| |
| /* Don't allow on the fly reconfiguration */ |
| reg = snd_soc_component_read(component, WM8994_CLOCKING_1); |
| if (reg < 0 || reg & WM8958_DSP2CLK_ENA) |
| return -EBUSY; |
| |
| if (value >= control->pdata.num_vss_hpf_cfgs) |
| return -EINVAL; |
| |
| wm8994->vss_hpf_cfg = value; |
| |
| return 0; |
| } |
| |
| static int wm8958_get_vss_hpf_enum(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol); |
| struct wm8994_priv *wm8994 = snd_soc_component_get_drvdata(component); |
| |
| ucontrol->value.enumerated.item[0] = wm8994->vss_hpf_cfg; |
| |
| return 0; |
| } |
| |
| static int wm8958_vss_info(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_info *uinfo) |
| { |
| uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN; |
| uinfo->count = 1; |
| uinfo->value.integer.min = 0; |
| uinfo->value.integer.max = 1; |
| return 0; |
| } |
| |
| static int wm8958_vss_get(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| int vss = kcontrol->private_value; |
| struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol); |
| struct wm8994_priv *wm8994 = snd_soc_component_get_drvdata(component); |
| |
| ucontrol->value.integer.value[0] = wm8994->vss_ena[vss]; |
| |
| return 0; |
| } |
| |
| static int wm8958_vss_put(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| int vss = kcontrol->private_value; |
| struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol); |
| struct wm8994_priv *wm8994 = snd_soc_component_get_drvdata(component); |
| |
| if (wm8994->vss_ena[vss] == ucontrol->value.integer.value[0]) |
| return 0; |
| |
| if (ucontrol->value.integer.value[0] > 1) |
| return -EINVAL; |
| |
| if (!wm8994->mbc_vss) |
| return -ENODEV; |
| |
| if (wm8958_dsp2_busy(wm8994, vss)) { |
| dev_dbg(component->dev, "DSP2 active on %d already\n", vss); |
| return -EBUSY; |
| } |
| |
| if (wm8994->enh_eq_ena[vss]) |
| return -EBUSY; |
| |
| wm8994->vss_ena[vss] = ucontrol->value.integer.value[0]; |
| |
| wm8958_dsp_apply(component, vss, wm8994->vss_ena[vss]); |
| |
| return 0; |
| } |
| |
| |
| #define WM8958_VSS_SWITCH(xname, xval) {\ |
| .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = (xname), \ |
| .access = SNDRV_CTL_ELEM_ACCESS_READWRITE,\ |
| .info = wm8958_vss_info, \ |
| .get = wm8958_vss_get, .put = wm8958_vss_put, \ |
| .private_value = xval } |
| |
| static int wm8958_hpf_info(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_info *uinfo) |
| { |
| uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN; |
| uinfo->count = 1; |
| uinfo->value.integer.min = 0; |
| uinfo->value.integer.max = 1; |
| return 0; |
| } |
| |
| static int wm8958_hpf_get(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| int hpf = kcontrol->private_value; |
| struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol); |
| struct wm8994_priv *wm8994 = snd_soc_component_get_drvdata(component); |
| |
| if (hpf < 3) |
| ucontrol->value.integer.value[0] = wm8994->hpf1_ena[hpf % 3]; |
| else |
| ucontrol->value.integer.value[0] = wm8994->hpf2_ena[hpf % 3]; |
| |
| return 0; |
| } |
| |
| static int wm8958_hpf_put(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| int hpf = kcontrol->private_value; |
| struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol); |
| struct wm8994_priv *wm8994 = snd_soc_component_get_drvdata(component); |
| |
| if (hpf < 3) { |
| if (wm8994->hpf1_ena[hpf % 3] == |
| ucontrol->value.integer.value[0]) |
| return 0; |
| } else { |
| if (wm8994->hpf2_ena[hpf % 3] == |
| ucontrol->value.integer.value[0]) |
| return 0; |
| } |
| |
| if (ucontrol->value.integer.value[0] > 1) |
| return -EINVAL; |
| |
| if (!wm8994->mbc_vss) |
| return -ENODEV; |
| |
| if (wm8958_dsp2_busy(wm8994, hpf % 3)) { |
| dev_dbg(component->dev, "DSP2 active on %d already\n", hpf); |
| return -EBUSY; |
| } |
| |
| if (wm8994->enh_eq_ena[hpf % 3]) |
| return -EBUSY; |
| |
| if (hpf < 3) |
| wm8994->hpf1_ena[hpf % 3] = ucontrol->value.integer.value[0]; |
| else |
| wm8994->hpf2_ena[hpf % 3] = ucontrol->value.integer.value[0]; |
| |
| wm8958_dsp_apply(component, hpf % 3, ucontrol->value.integer.value[0]); |
| |
| return 0; |
| } |
| |
| #define WM8958_HPF_SWITCH(xname, xval) {\ |
| .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = (xname), \ |
| .access = SNDRV_CTL_ELEM_ACCESS_READWRITE,\ |
| .info = wm8958_hpf_info, \ |
| .get = wm8958_hpf_get, .put = wm8958_hpf_put, \ |
| .private_value = xval } |
| |
| static int wm8958_put_enh_eq_enum(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol); |
| struct wm8994_priv *wm8994 = snd_soc_component_get_drvdata(component); |
| struct wm8994 *control = wm8994->wm8994; |
| int value = ucontrol->value.enumerated.item[0]; |
| int reg; |
| |
| /* Don't allow on the fly reconfiguration */ |
| reg = snd_soc_component_read(component, WM8994_CLOCKING_1); |
| if (reg < 0 || reg & WM8958_DSP2CLK_ENA) |
| return -EBUSY; |
| |
| if (value >= control->pdata.num_enh_eq_cfgs) |
| return -EINVAL; |
| |
| wm8994->enh_eq_cfg = value; |
| |
| return 0; |
| } |
| |
| static int wm8958_get_enh_eq_enum(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol); |
| struct wm8994_priv *wm8994 = snd_soc_component_get_drvdata(component); |
| |
| ucontrol->value.enumerated.item[0] = wm8994->enh_eq_cfg; |
| |
| return 0; |
| } |
| |
| static int wm8958_enh_eq_info(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_info *uinfo) |
| { |
| uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN; |
| uinfo->count = 1; |
| uinfo->value.integer.min = 0; |
| uinfo->value.integer.max = 1; |
| return 0; |
| } |
| |
| static int wm8958_enh_eq_get(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| int eq = kcontrol->private_value; |
| struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol); |
| struct wm8994_priv *wm8994 = snd_soc_component_get_drvdata(component); |
| |
| ucontrol->value.integer.value[0] = wm8994->enh_eq_ena[eq]; |
| |
| return 0; |
| } |
| |
| static int wm8958_enh_eq_put(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| int eq = kcontrol->private_value; |
| struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol); |
| struct wm8994_priv *wm8994 = snd_soc_component_get_drvdata(component); |
| |
| if (wm8994->enh_eq_ena[eq] == ucontrol->value.integer.value[0]) |
| return 0; |
| |
| if (ucontrol->value.integer.value[0] > 1) |
| return -EINVAL; |
| |
| if (!wm8994->enh_eq) |
| return -ENODEV; |
| |
| if (wm8958_dsp2_busy(wm8994, eq)) { |
| dev_dbg(component->dev, "DSP2 active on %d already\n", eq); |
| return -EBUSY; |
| } |
| |
| if (wm8994->mbc_ena[eq] || wm8994->vss_ena[eq] || |
| wm8994->hpf1_ena[eq] || wm8994->hpf2_ena[eq]) |
| return -EBUSY; |
| |
| wm8994->enh_eq_ena[eq] = ucontrol->value.integer.value[0]; |
| |
| wm8958_dsp_apply(component, eq, ucontrol->value.integer.value[0]); |
| |
| return 0; |
| } |
| |
| #define WM8958_ENH_EQ_SWITCH(xname, xval) {\ |
| .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = (xname), \ |
| .access = SNDRV_CTL_ELEM_ACCESS_READWRITE,\ |
| .info = wm8958_enh_eq_info, \ |
| .get = wm8958_enh_eq_get, .put = wm8958_enh_eq_put, \ |
| .private_value = xval } |
| |
| static const struct snd_kcontrol_new wm8958_mbc_snd_controls[] = { |
| WM8958_MBC_SWITCH("AIF1DAC1 MBC Switch", 0), |
| WM8958_MBC_SWITCH("AIF1DAC2 MBC Switch", 1), |
| WM8958_MBC_SWITCH("AIF2DAC MBC Switch", 2), |
| }; |
| |
| static const struct snd_kcontrol_new wm8958_vss_snd_controls[] = { |
| WM8958_VSS_SWITCH("AIF1DAC1 VSS Switch", 0), |
| WM8958_VSS_SWITCH("AIF1DAC2 VSS Switch", 1), |
| WM8958_VSS_SWITCH("AIF2DAC VSS Switch", 2), |
| WM8958_HPF_SWITCH("AIF1DAC1 HPF1 Switch", 0), |
| WM8958_HPF_SWITCH("AIF1DAC2 HPF1 Switch", 1), |
| WM8958_HPF_SWITCH("AIF2DAC HPF1 Switch", 2), |
| WM8958_HPF_SWITCH("AIF1DAC1 HPF2 Switch", 3), |
| WM8958_HPF_SWITCH("AIF1DAC2 HPF2 Switch", 4), |
| WM8958_HPF_SWITCH("AIF2DAC HPF2 Switch", 5), |
| }; |
| |
| static const struct snd_kcontrol_new wm8958_enh_eq_snd_controls[] = { |
| WM8958_ENH_EQ_SWITCH("AIF1DAC1 Enhanced EQ Switch", 0), |
| WM8958_ENH_EQ_SWITCH("AIF1DAC2 Enhanced EQ Switch", 1), |
| WM8958_ENH_EQ_SWITCH("AIF2DAC Enhanced EQ Switch", 2), |
| }; |
| |
| static void wm8958_enh_eq_loaded(const struct firmware *fw, void *context) |
| { |
| struct snd_soc_component *component = context; |
| struct wm8994_priv *wm8994 = snd_soc_component_get_drvdata(component); |
| |
| if (fw && (wm8958_dsp2_fw(component, "ENH_EQ", fw, true) == 0)) { |
| mutex_lock(&wm8994->fw_lock); |
| wm8994->enh_eq = fw; |
| mutex_unlock(&wm8994->fw_lock); |
| } |
| } |
| |
| static void wm8958_mbc_vss_loaded(const struct firmware *fw, void *context) |
| { |
| struct snd_soc_component *component = context; |
| struct wm8994_priv *wm8994 = snd_soc_component_get_drvdata(component); |
| |
| if (fw && (wm8958_dsp2_fw(component, "MBC+VSS", fw, true) == 0)) { |
| mutex_lock(&wm8994->fw_lock); |
| wm8994->mbc_vss = fw; |
| mutex_unlock(&wm8994->fw_lock); |
| } |
| } |
| |
| static void wm8958_mbc_loaded(const struct firmware *fw, void *context) |
| { |
| struct snd_soc_component *component = context; |
| struct wm8994_priv *wm8994 = snd_soc_component_get_drvdata(component); |
| |
| if (fw && (wm8958_dsp2_fw(component, "MBC", fw, true) == 0)) { |
| mutex_lock(&wm8994->fw_lock); |
| wm8994->mbc = fw; |
| mutex_unlock(&wm8994->fw_lock); |
| } |
| } |
| |
| void wm8958_dsp2_init(struct snd_soc_component *component) |
| { |
| struct wm8994_priv *wm8994 = snd_soc_component_get_drvdata(component); |
| struct wm8994 *control = wm8994->wm8994; |
| struct wm8994_pdata *pdata = &control->pdata; |
| int ret, i; |
| |
| wm8994->dsp_active = -1; |
| |
| snd_soc_add_component_controls(component, wm8958_mbc_snd_controls, |
| ARRAY_SIZE(wm8958_mbc_snd_controls)); |
| snd_soc_add_component_controls(component, wm8958_vss_snd_controls, |
| ARRAY_SIZE(wm8958_vss_snd_controls)); |
| snd_soc_add_component_controls(component, wm8958_enh_eq_snd_controls, |
| ARRAY_SIZE(wm8958_enh_eq_snd_controls)); |
| |
| |
| /* We don't *require* firmware and don't want to delay boot */ |
| request_firmware_nowait(THIS_MODULE, FW_ACTION_HOTPLUG, |
| "wm8958_mbc.wfw", component->dev, GFP_KERNEL, |
| component, wm8958_mbc_loaded); |
| request_firmware_nowait(THIS_MODULE, FW_ACTION_HOTPLUG, |
| "wm8958_mbc_vss.wfw", component->dev, GFP_KERNEL, |
| component, wm8958_mbc_vss_loaded); |
| request_firmware_nowait(THIS_MODULE, FW_ACTION_HOTPLUG, |
| "wm8958_enh_eq.wfw", component->dev, GFP_KERNEL, |
| component, wm8958_enh_eq_loaded); |
| |
| if (pdata->num_mbc_cfgs) { |
| struct snd_kcontrol_new mbc_control[] = { |
| SOC_ENUM_EXT("MBC Mode", wm8994->mbc_enum, |
| wm8958_get_mbc_enum, wm8958_put_mbc_enum), |
| }; |
| |
| /* We need an array of texts for the enum API */ |
| wm8994->mbc_texts = kmalloc_array(pdata->num_mbc_cfgs, |
| sizeof(char *), |
| GFP_KERNEL); |
| if (!wm8994->mbc_texts) |
| return; |
| |
| for (i = 0; i < pdata->num_mbc_cfgs; i++) |
| wm8994->mbc_texts[i] = pdata->mbc_cfgs[i].name; |
| |
| wm8994->mbc_enum.items = pdata->num_mbc_cfgs; |
| wm8994->mbc_enum.texts = wm8994->mbc_texts; |
| |
| ret = snd_soc_add_component_controls(wm8994->hubs.component, |
| mbc_control, 1); |
| if (ret != 0) |
| dev_err(wm8994->hubs.component->dev, |
| "Failed to add MBC mode controls: %d\n", ret); |
| } |
| |
| if (pdata->num_vss_cfgs) { |
| struct snd_kcontrol_new vss_control[] = { |
| SOC_ENUM_EXT("VSS Mode", wm8994->vss_enum, |
| wm8958_get_vss_enum, wm8958_put_vss_enum), |
| }; |
| |
| /* We need an array of texts for the enum API */ |
| wm8994->vss_texts = kmalloc_array(pdata->num_vss_cfgs, |
| sizeof(char *), |
| GFP_KERNEL); |
| if (!wm8994->vss_texts) |
| return; |
| |
| for (i = 0; i < pdata->num_vss_cfgs; i++) |
| wm8994->vss_texts[i] = pdata->vss_cfgs[i].name; |
| |
| wm8994->vss_enum.items = pdata->num_vss_cfgs; |
| wm8994->vss_enum.texts = wm8994->vss_texts; |
| |
| ret = snd_soc_add_component_controls(wm8994->hubs.component, |
| vss_control, 1); |
| if (ret != 0) |
| dev_err(wm8994->hubs.component->dev, |
| "Failed to add VSS mode controls: %d\n", ret); |
| } |
| |
| if (pdata->num_vss_hpf_cfgs) { |
| struct snd_kcontrol_new hpf_control[] = { |
| SOC_ENUM_EXT("VSS HPF Mode", wm8994->vss_hpf_enum, |
| wm8958_get_vss_hpf_enum, |
| wm8958_put_vss_hpf_enum), |
| }; |
| |
| /* We need an array of texts for the enum API */ |
| wm8994->vss_hpf_texts = kmalloc_array(pdata->num_vss_hpf_cfgs, |
| sizeof(char *), |
| GFP_KERNEL); |
| if (!wm8994->vss_hpf_texts) |
| return; |
| |
| for (i = 0; i < pdata->num_vss_hpf_cfgs; i++) |
| wm8994->vss_hpf_texts[i] = pdata->vss_hpf_cfgs[i].name; |
| |
| wm8994->vss_hpf_enum.items = pdata->num_vss_hpf_cfgs; |
| wm8994->vss_hpf_enum.texts = wm8994->vss_hpf_texts; |
| |
| ret = snd_soc_add_component_controls(wm8994->hubs.component, |
| hpf_control, 1); |
| if (ret != 0) |
| dev_err(wm8994->hubs.component->dev, |
| "Failed to add VSS HPFmode controls: %d\n", |
| ret); |
| } |
| |
| if (pdata->num_enh_eq_cfgs) { |
| struct snd_kcontrol_new eq_control[] = { |
| SOC_ENUM_EXT("Enhanced EQ Mode", wm8994->enh_eq_enum, |
| wm8958_get_enh_eq_enum, |
| wm8958_put_enh_eq_enum), |
| }; |
| |
| /* We need an array of texts for the enum API */ |
| wm8994->enh_eq_texts = kmalloc_array(pdata->num_enh_eq_cfgs, |
| sizeof(char *), |
| GFP_KERNEL); |
| if (!wm8994->enh_eq_texts) |
| return; |
| |
| for (i = 0; i < pdata->num_enh_eq_cfgs; i++) |
| wm8994->enh_eq_texts[i] = pdata->enh_eq_cfgs[i].name; |
| |
| wm8994->enh_eq_enum.items = pdata->num_enh_eq_cfgs; |
| wm8994->enh_eq_enum.texts = wm8994->enh_eq_texts; |
| |
| ret = snd_soc_add_component_controls(wm8994->hubs.component, |
| eq_control, 1); |
| if (ret != 0) |
| dev_err(wm8994->hubs.component->dev, |
| "Failed to add enhanced EQ controls: %d\n", |
| ret); |
| } |
| } |