| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * A hwmon driver for the Analog Devices ADT7470 |
| * Copyright (C) 2007 IBM |
| * |
| * Author: Darrick J. Wong <darrick.wong@oracle.com> |
| */ |
| |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
| |
| #include <linux/module.h> |
| #include <linux/jiffies.h> |
| #include <linux/i2c.h> |
| #include <linux/hwmon.h> |
| #include <linux/hwmon-sysfs.h> |
| #include <linux/err.h> |
| #include <linux/mutex.h> |
| #include <linux/delay.h> |
| #include <linux/log2.h> |
| #include <linux/kthread.h> |
| #include <linux/slab.h> |
| #include <linux/util_macros.h> |
| |
| /* Addresses to scan */ |
| static const unsigned short normal_i2c[] = { 0x2C, 0x2E, 0x2F, I2C_CLIENT_END }; |
| |
| /* ADT7470 registers */ |
| #define ADT7470_REG_BASE_ADDR 0x20 |
| #define ADT7470_REG_TEMP_BASE_ADDR 0x20 |
| #define ADT7470_REG_TEMP_MAX_ADDR 0x29 |
| #define ADT7470_REG_FAN_BASE_ADDR 0x2A |
| #define ADT7470_REG_FAN_MAX_ADDR 0x31 |
| #define ADT7470_REG_PWM_BASE_ADDR 0x32 |
| #define ADT7470_REG_PWM_MAX_ADDR 0x35 |
| #define ADT7470_REG_PWM_MAX_BASE_ADDR 0x38 |
| #define ADT7470_REG_PWM_MAX_MAX_ADDR 0x3B |
| #define ADT7470_REG_CFG 0x40 |
| #define ADT7470_FSPD_MASK 0x04 |
| #define ADT7470_REG_ALARM1 0x41 |
| #define ADT7470_R1T_ALARM 0x01 |
| #define ADT7470_R2T_ALARM 0x02 |
| #define ADT7470_R3T_ALARM 0x04 |
| #define ADT7470_R4T_ALARM 0x08 |
| #define ADT7470_R5T_ALARM 0x10 |
| #define ADT7470_R6T_ALARM 0x20 |
| #define ADT7470_R7T_ALARM 0x40 |
| #define ADT7470_OOL_ALARM 0x80 |
| #define ADT7470_REG_ALARM2 0x42 |
| #define ADT7470_R8T_ALARM 0x01 |
| #define ADT7470_R9T_ALARM 0x02 |
| #define ADT7470_R10T_ALARM 0x04 |
| #define ADT7470_FAN1_ALARM 0x10 |
| #define ADT7470_FAN2_ALARM 0x20 |
| #define ADT7470_FAN3_ALARM 0x40 |
| #define ADT7470_FAN4_ALARM 0x80 |
| #define ADT7470_REG_TEMP_LIMITS_BASE_ADDR 0x44 |
| #define ADT7470_REG_TEMP_LIMITS_MAX_ADDR 0x57 |
| #define ADT7470_REG_FAN_MIN_BASE_ADDR 0x58 |
| #define ADT7470_REG_FAN_MIN_MAX_ADDR 0x5F |
| #define ADT7470_REG_FAN_MAX_BASE_ADDR 0x60 |
| #define ADT7470_REG_FAN_MAX_MAX_ADDR 0x67 |
| #define ADT7470_REG_PWM_CFG_BASE_ADDR 0x68 |
| #define ADT7470_REG_PWM12_CFG 0x68 |
| #define ADT7470_PWM2_AUTO_MASK 0x40 |
| #define ADT7470_PWM1_AUTO_MASK 0x80 |
| #define ADT7470_PWM_AUTO_MASK 0xC0 |
| #define ADT7470_REG_PWM34_CFG 0x69 |
| #define ADT7470_PWM3_AUTO_MASK 0x40 |
| #define ADT7470_PWM4_AUTO_MASK 0x80 |
| #define ADT7470_REG_PWM_MIN_BASE_ADDR 0x6A |
| #define ADT7470_REG_PWM_MIN_MAX_ADDR 0x6D |
| #define ADT7470_REG_PWM_TEMP_MIN_BASE_ADDR 0x6E |
| #define ADT7470_REG_PWM_TEMP_MIN_MAX_ADDR 0x71 |
| #define ADT7470_REG_CFG_2 0x74 |
| #define ADT7470_REG_ACOUSTICS12 0x75 |
| #define ADT7470_REG_ACOUSTICS34 0x76 |
| #define ADT7470_REG_DEVICE 0x3D |
| #define ADT7470_REG_VENDOR 0x3E |
| #define ADT7470_REG_REVISION 0x3F |
| #define ADT7470_REG_ALARM1_MASK 0x72 |
| #define ADT7470_REG_ALARM2_MASK 0x73 |
| #define ADT7470_REG_PWM_AUTO_TEMP_BASE_ADDR 0x7C |
| #define ADT7470_REG_PWM_AUTO_TEMP_MAX_ADDR 0x7D |
| #define ADT7470_REG_MAX_ADDR 0x81 |
| |
| #define ADT7470_TEMP_COUNT 10 |
| #define ADT7470_TEMP_REG(x) (ADT7470_REG_TEMP_BASE_ADDR + (x)) |
| #define ADT7470_TEMP_MIN_REG(x) (ADT7470_REG_TEMP_LIMITS_BASE_ADDR + ((x) * 2)) |
| #define ADT7470_TEMP_MAX_REG(x) (ADT7470_REG_TEMP_LIMITS_BASE_ADDR + \ |
| ((x) * 2) + 1) |
| |
| #define ADT7470_FAN_COUNT 4 |
| #define ADT7470_REG_FAN(x) (ADT7470_REG_FAN_BASE_ADDR + ((x) * 2)) |
| #define ADT7470_REG_FAN_MIN(x) (ADT7470_REG_FAN_MIN_BASE_ADDR + ((x) * 2)) |
| #define ADT7470_REG_FAN_MAX(x) (ADT7470_REG_FAN_MAX_BASE_ADDR + ((x) * 2)) |
| |
| #define ADT7470_PWM_COUNT 4 |
| #define ADT7470_REG_PWM(x) (ADT7470_REG_PWM_BASE_ADDR + (x)) |
| #define ADT7470_REG_PWM_MAX(x) (ADT7470_REG_PWM_MAX_BASE_ADDR + (x)) |
| #define ADT7470_REG_PWM_MIN(x) (ADT7470_REG_PWM_MIN_BASE_ADDR + (x)) |
| #define ADT7470_REG_PWM_TMIN(x) (ADT7470_REG_PWM_TEMP_MIN_BASE_ADDR + (x)) |
| #define ADT7470_REG_PWM_CFG(x) (ADT7470_REG_PWM_CFG_BASE_ADDR + ((x) / 2)) |
| #define ADT7470_REG_PWM_AUTO_TEMP(x) (ADT7470_REG_PWM_AUTO_TEMP_BASE_ADDR + \ |
| ((x) / 2)) |
| |
| #define ALARM2(x) ((x) << 8) |
| |
| #define ADT7470_VENDOR 0x41 |
| #define ADT7470_DEVICE 0x70 |
| /* datasheet only mentions a revision 2 */ |
| #define ADT7470_REVISION 0x02 |
| |
| /* "all temps" according to hwmon sysfs interface spec */ |
| #define ADT7470_PWM_ALL_TEMPS 0x3FF |
| |
| /* How often do we reread sensors values? (In jiffies) */ |
| #define SENSOR_REFRESH_INTERVAL (5 * HZ) |
| |
| /* How often do we reread sensor limit values? (In jiffies) */ |
| #define LIMIT_REFRESH_INTERVAL (60 * HZ) |
| |
| /* Wait at least 200ms per sensor for 10 sensors */ |
| #define TEMP_COLLECTION_TIME 2000 |
| |
| /* auto update thing won't fire more than every 2s */ |
| #define AUTO_UPDATE_INTERVAL 2000 |
| |
| /* datasheet says to divide this number by the fan reading to get fan rpm */ |
| #define FAN_PERIOD_TO_RPM(x) ((90000 * 60) / (x)) |
| #define FAN_RPM_TO_PERIOD FAN_PERIOD_TO_RPM |
| #define FAN_PERIOD_INVALID 65535 |
| #define FAN_DATA_VALID(x) ((x) && (x) != FAN_PERIOD_INVALID) |
| |
| /* Config registers 1 and 2 include fields for selecting the PWM frequency */ |
| #define ADT7470_CFG_LF 0x40 |
| #define ADT7470_FREQ_MASK 0x70 |
| #define ADT7470_FREQ_SHIFT 4 |
| |
| struct adt7470_data { |
| struct i2c_client *client; |
| struct mutex lock; |
| char sensors_valid; |
| char limits_valid; |
| unsigned long sensors_last_updated; /* In jiffies */ |
| unsigned long limits_last_updated; /* In jiffies */ |
| |
| int num_temp_sensors; /* -1 = probe */ |
| int temperatures_probed; |
| |
| s8 temp[ADT7470_TEMP_COUNT]; |
| s8 temp_min[ADT7470_TEMP_COUNT]; |
| s8 temp_max[ADT7470_TEMP_COUNT]; |
| u16 fan[ADT7470_FAN_COUNT]; |
| u16 fan_min[ADT7470_FAN_COUNT]; |
| u16 fan_max[ADT7470_FAN_COUNT]; |
| u16 alarm; |
| u16 alarms_mask; |
| u8 force_pwm_max; |
| u8 pwm[ADT7470_PWM_COUNT]; |
| u8 pwm_max[ADT7470_PWM_COUNT]; |
| u8 pwm_automatic[ADT7470_PWM_COUNT]; |
| u8 pwm_min[ADT7470_PWM_COUNT]; |
| s8 pwm_tmin[ADT7470_PWM_COUNT]; |
| u8 pwm_auto_temp[ADT7470_PWM_COUNT]; |
| |
| struct task_struct *auto_update; |
| unsigned int auto_update_interval; |
| }; |
| |
| /* |
| * 16-bit registers on the ADT7470 are low-byte first. The data sheet says |
| * that the low byte must be read before the high byte. |
| */ |
| static inline int adt7470_read_word_data(struct i2c_client *client, u8 reg) |
| { |
| u16 foo; |
| foo = i2c_smbus_read_byte_data(client, reg); |
| foo |= ((u16)i2c_smbus_read_byte_data(client, reg + 1) << 8); |
| return foo; |
| } |
| |
| static inline int adt7470_write_word_data(struct i2c_client *client, u8 reg, |
| u16 value) |
| { |
| return i2c_smbus_write_byte_data(client, reg, value & 0xFF) |
| || i2c_smbus_write_byte_data(client, reg + 1, value >> 8); |
| } |
| |
| /* Probe for temperature sensors. Assumes lock is held */ |
| static int adt7470_read_temperatures(struct i2c_client *client, |
| struct adt7470_data *data) |
| { |
| unsigned long res; |
| int i; |
| u8 cfg, pwm[4], pwm_cfg[2]; |
| |
| /* save pwm[1-4] config register */ |
| pwm_cfg[0] = i2c_smbus_read_byte_data(client, ADT7470_REG_PWM_CFG(0)); |
| pwm_cfg[1] = i2c_smbus_read_byte_data(client, ADT7470_REG_PWM_CFG(2)); |
| |
| /* set manual pwm to whatever it is set to now */ |
| for (i = 0; i < ADT7470_FAN_COUNT; i++) |
| pwm[i] = i2c_smbus_read_byte_data(client, ADT7470_REG_PWM(i)); |
| |
| /* put pwm in manual mode */ |
| i2c_smbus_write_byte_data(client, ADT7470_REG_PWM_CFG(0), |
| pwm_cfg[0] & ~(ADT7470_PWM_AUTO_MASK)); |
| i2c_smbus_write_byte_data(client, ADT7470_REG_PWM_CFG(2), |
| pwm_cfg[1] & ~(ADT7470_PWM_AUTO_MASK)); |
| |
| /* write pwm control to whatever it was */ |
| for (i = 0; i < ADT7470_FAN_COUNT; i++) |
| i2c_smbus_write_byte_data(client, ADT7470_REG_PWM(i), pwm[i]); |
| |
| /* start reading temperature sensors */ |
| cfg = i2c_smbus_read_byte_data(client, ADT7470_REG_CFG); |
| cfg |= 0x80; |
| i2c_smbus_write_byte_data(client, ADT7470_REG_CFG, cfg); |
| |
| /* Delay is 200ms * number of temp sensors. */ |
| res = msleep_interruptible((data->num_temp_sensors >= 0 ? |
| data->num_temp_sensors * 200 : |
| TEMP_COLLECTION_TIME)); |
| |
| /* done reading temperature sensors */ |
| cfg = i2c_smbus_read_byte_data(client, ADT7470_REG_CFG); |
| cfg &= ~0x80; |
| i2c_smbus_write_byte_data(client, ADT7470_REG_CFG, cfg); |
| |
| /* restore pwm[1-4] config registers */ |
| i2c_smbus_write_byte_data(client, ADT7470_REG_PWM_CFG(0), pwm_cfg[0]); |
| i2c_smbus_write_byte_data(client, ADT7470_REG_PWM_CFG(2), pwm_cfg[1]); |
| |
| if (res) { |
| pr_err("ha ha, interrupted\n"); |
| return -EAGAIN; |
| } |
| |
| /* Only count fans if we have to */ |
| if (data->num_temp_sensors >= 0) |
| return 0; |
| |
| for (i = 0; i < ADT7470_TEMP_COUNT; i++) { |
| data->temp[i] = i2c_smbus_read_byte_data(client, |
| ADT7470_TEMP_REG(i)); |
| if (data->temp[i]) |
| data->num_temp_sensors = i + 1; |
| } |
| data->temperatures_probed = 1; |
| return 0; |
| } |
| |
| static int adt7470_update_thread(void *p) |
| { |
| struct i2c_client *client = p; |
| struct adt7470_data *data = i2c_get_clientdata(client); |
| |
| while (!kthread_should_stop()) { |
| mutex_lock(&data->lock); |
| adt7470_read_temperatures(client, data); |
| mutex_unlock(&data->lock); |
| |
| set_current_state(TASK_INTERRUPTIBLE); |
| if (kthread_should_stop()) |
| break; |
| |
| schedule_timeout(msecs_to_jiffies(data->auto_update_interval)); |
| } |
| |
| return 0; |
| } |
| |
| static struct adt7470_data *adt7470_update_device(struct device *dev) |
| { |
| struct adt7470_data *data = dev_get_drvdata(dev); |
| struct i2c_client *client = data->client; |
| unsigned long local_jiffies = jiffies; |
| u8 cfg; |
| int i; |
| int need_sensors = 1; |
| int need_limits = 1; |
| |
| /* |
| * Figure out if we need to update the shadow registers. |
| * Lockless means that we may occasionally report out of |
| * date data. |
| */ |
| if (time_before(local_jiffies, data->sensors_last_updated + |
| SENSOR_REFRESH_INTERVAL) && |
| data->sensors_valid) |
| need_sensors = 0; |
| |
| if (time_before(local_jiffies, data->limits_last_updated + |
| LIMIT_REFRESH_INTERVAL) && |
| data->limits_valid) |
| need_limits = 0; |
| |
| if (!need_sensors && !need_limits) |
| return data; |
| |
| mutex_lock(&data->lock); |
| if (!need_sensors) |
| goto no_sensor_update; |
| |
| if (!data->temperatures_probed) |
| adt7470_read_temperatures(client, data); |
| else |
| for (i = 0; i < ADT7470_TEMP_COUNT; i++) |
| data->temp[i] = i2c_smbus_read_byte_data(client, |
| ADT7470_TEMP_REG(i)); |
| |
| for (i = 0; i < ADT7470_FAN_COUNT; i++) |
| data->fan[i] = adt7470_read_word_data(client, |
| ADT7470_REG_FAN(i)); |
| |
| for (i = 0; i < ADT7470_PWM_COUNT; i++) { |
| int reg; |
| int reg_mask; |
| |
| data->pwm[i] = i2c_smbus_read_byte_data(client, |
| ADT7470_REG_PWM(i)); |
| |
| if (i % 2) |
| reg_mask = ADT7470_PWM2_AUTO_MASK; |
| else |
| reg_mask = ADT7470_PWM1_AUTO_MASK; |
| |
| reg = ADT7470_REG_PWM_CFG(i); |
| if (i2c_smbus_read_byte_data(client, reg) & reg_mask) |
| data->pwm_automatic[i] = 1; |
| else |
| data->pwm_automatic[i] = 0; |
| |
| reg = ADT7470_REG_PWM_AUTO_TEMP(i); |
| cfg = i2c_smbus_read_byte_data(client, reg); |
| if (!(i % 2)) |
| data->pwm_auto_temp[i] = cfg >> 4; |
| else |
| data->pwm_auto_temp[i] = cfg & 0xF; |
| } |
| |
| if (i2c_smbus_read_byte_data(client, ADT7470_REG_CFG) & |
| ADT7470_FSPD_MASK) |
| data->force_pwm_max = 1; |
| else |
| data->force_pwm_max = 0; |
| |
| data->alarm = i2c_smbus_read_byte_data(client, ADT7470_REG_ALARM1); |
| if (data->alarm & ADT7470_OOL_ALARM) |
| data->alarm |= ALARM2(i2c_smbus_read_byte_data(client, |
| ADT7470_REG_ALARM2)); |
| data->alarms_mask = adt7470_read_word_data(client, |
| ADT7470_REG_ALARM1_MASK); |
| |
| data->sensors_last_updated = local_jiffies; |
| data->sensors_valid = 1; |
| |
| no_sensor_update: |
| if (!need_limits) |
| goto out; |
| |
| for (i = 0; i < ADT7470_TEMP_COUNT; i++) { |
| data->temp_min[i] = i2c_smbus_read_byte_data(client, |
| ADT7470_TEMP_MIN_REG(i)); |
| data->temp_max[i] = i2c_smbus_read_byte_data(client, |
| ADT7470_TEMP_MAX_REG(i)); |
| } |
| |
| for (i = 0; i < ADT7470_FAN_COUNT; i++) { |
| data->fan_min[i] = adt7470_read_word_data(client, |
| ADT7470_REG_FAN_MIN(i)); |
| data->fan_max[i] = adt7470_read_word_data(client, |
| ADT7470_REG_FAN_MAX(i)); |
| } |
| |
| for (i = 0; i < ADT7470_PWM_COUNT; i++) { |
| data->pwm_max[i] = i2c_smbus_read_byte_data(client, |
| ADT7470_REG_PWM_MAX(i)); |
| data->pwm_min[i] = i2c_smbus_read_byte_data(client, |
| ADT7470_REG_PWM_MIN(i)); |
| data->pwm_tmin[i] = i2c_smbus_read_byte_data(client, |
| ADT7470_REG_PWM_TMIN(i)); |
| } |
| |
| data->limits_last_updated = local_jiffies; |
| data->limits_valid = 1; |
| |
| out: |
| mutex_unlock(&data->lock); |
| return data; |
| } |
| |
| static ssize_t auto_update_interval_show(struct device *dev, |
| struct device_attribute *devattr, |
| char *buf) |
| { |
| struct adt7470_data *data = adt7470_update_device(dev); |
| return sprintf(buf, "%d\n", data->auto_update_interval); |
| } |
| |
| static ssize_t auto_update_interval_store(struct device *dev, |
| struct device_attribute *devattr, |
| const char *buf, size_t count) |
| { |
| struct adt7470_data *data = dev_get_drvdata(dev); |
| long temp; |
| |
| if (kstrtol(buf, 10, &temp)) |
| return -EINVAL; |
| |
| temp = clamp_val(temp, 0, 60000); |
| |
| mutex_lock(&data->lock); |
| data->auto_update_interval = temp; |
| mutex_unlock(&data->lock); |
| |
| return count; |
| } |
| |
| static ssize_t num_temp_sensors_show(struct device *dev, |
| struct device_attribute *devattr, |
| char *buf) |
| { |
| struct adt7470_data *data = adt7470_update_device(dev); |
| return sprintf(buf, "%d\n", data->num_temp_sensors); |
| } |
| |
| static ssize_t num_temp_sensors_store(struct device *dev, |
| struct device_attribute *devattr, |
| const char *buf, size_t count) |
| { |
| struct adt7470_data *data = dev_get_drvdata(dev); |
| long temp; |
| |
| if (kstrtol(buf, 10, &temp)) |
| return -EINVAL; |
| |
| temp = clamp_val(temp, -1, 10); |
| |
| mutex_lock(&data->lock); |
| data->num_temp_sensors = temp; |
| if (temp < 0) |
| data->temperatures_probed = 0; |
| mutex_unlock(&data->lock); |
| |
| return count; |
| } |
| |
| static ssize_t temp_min_show(struct device *dev, |
| struct device_attribute *devattr, char *buf) |
| { |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| struct adt7470_data *data = adt7470_update_device(dev); |
| return sprintf(buf, "%d\n", 1000 * data->temp_min[attr->index]); |
| } |
| |
| static ssize_t temp_min_store(struct device *dev, |
| struct device_attribute *devattr, |
| const char *buf, size_t count) |
| { |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| struct adt7470_data *data = dev_get_drvdata(dev); |
| struct i2c_client *client = data->client; |
| long temp; |
| |
| if (kstrtol(buf, 10, &temp)) |
| return -EINVAL; |
| |
| temp = clamp_val(temp, -128000, 127000); |
| temp = DIV_ROUND_CLOSEST(temp, 1000); |
| |
| mutex_lock(&data->lock); |
| data->temp_min[attr->index] = temp; |
| i2c_smbus_write_byte_data(client, ADT7470_TEMP_MIN_REG(attr->index), |
| temp); |
| mutex_unlock(&data->lock); |
| |
| return count; |
| } |
| |
| static ssize_t temp_max_show(struct device *dev, |
| struct device_attribute *devattr, char *buf) |
| { |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| struct adt7470_data *data = adt7470_update_device(dev); |
| return sprintf(buf, "%d\n", 1000 * data->temp_max[attr->index]); |
| } |
| |
| static ssize_t temp_max_store(struct device *dev, |
| struct device_attribute *devattr, |
| const char *buf, size_t count) |
| { |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| struct adt7470_data *data = dev_get_drvdata(dev); |
| struct i2c_client *client = data->client; |
| long temp; |
| |
| if (kstrtol(buf, 10, &temp)) |
| return -EINVAL; |
| |
| temp = clamp_val(temp, -128000, 127000); |
| temp = DIV_ROUND_CLOSEST(temp, 1000); |
| |
| mutex_lock(&data->lock); |
| data->temp_max[attr->index] = temp; |
| i2c_smbus_write_byte_data(client, ADT7470_TEMP_MAX_REG(attr->index), |
| temp); |
| mutex_unlock(&data->lock); |
| |
| return count; |
| } |
| |
| static ssize_t temp_show(struct device *dev, struct device_attribute *devattr, |
| char *buf) |
| { |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| struct adt7470_data *data = adt7470_update_device(dev); |
| return sprintf(buf, "%d\n", 1000 * data->temp[attr->index]); |
| } |
| |
| static ssize_t alarm_mask_show(struct device *dev, |
| struct device_attribute *devattr, |
| char *buf) |
| { |
| struct adt7470_data *data = adt7470_update_device(dev); |
| |
| return sprintf(buf, "%x\n", data->alarms_mask); |
| } |
| |
| static ssize_t alarm_mask_store(struct device *dev, |
| struct device_attribute *devattr, |
| const char *buf, size_t count) |
| { |
| struct adt7470_data *data = dev_get_drvdata(dev); |
| long mask; |
| |
| if (kstrtoul(buf, 0, &mask)) |
| return -EINVAL; |
| |
| if (mask & ~0xffff) |
| return -EINVAL; |
| |
| mutex_lock(&data->lock); |
| data->alarms_mask = mask; |
| adt7470_write_word_data(data->client, ADT7470_REG_ALARM1_MASK, mask); |
| mutex_unlock(&data->lock); |
| |
| return count; |
| } |
| |
| static ssize_t fan_max_show(struct device *dev, |
| struct device_attribute *devattr, char *buf) |
| { |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| struct adt7470_data *data = adt7470_update_device(dev); |
| |
| if (FAN_DATA_VALID(data->fan_max[attr->index])) |
| return sprintf(buf, "%d\n", |
| FAN_PERIOD_TO_RPM(data->fan_max[attr->index])); |
| else |
| return sprintf(buf, "0\n"); |
| } |
| |
| static ssize_t fan_max_store(struct device *dev, |
| struct device_attribute *devattr, |
| const char *buf, size_t count) |
| { |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| struct adt7470_data *data = dev_get_drvdata(dev); |
| struct i2c_client *client = data->client; |
| long temp; |
| |
| if (kstrtol(buf, 10, &temp) || !temp) |
| return -EINVAL; |
| |
| temp = FAN_RPM_TO_PERIOD(temp); |
| temp = clamp_val(temp, 1, 65534); |
| |
| mutex_lock(&data->lock); |
| data->fan_max[attr->index] = temp; |
| adt7470_write_word_data(client, ADT7470_REG_FAN_MAX(attr->index), temp); |
| mutex_unlock(&data->lock); |
| |
| return count; |
| } |
| |
| static ssize_t fan_min_show(struct device *dev, |
| struct device_attribute *devattr, char *buf) |
| { |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| struct adt7470_data *data = adt7470_update_device(dev); |
| |
| if (FAN_DATA_VALID(data->fan_min[attr->index])) |
| return sprintf(buf, "%d\n", |
| FAN_PERIOD_TO_RPM(data->fan_min[attr->index])); |
| else |
| return sprintf(buf, "0\n"); |
| } |
| |
| static ssize_t fan_min_store(struct device *dev, |
| struct device_attribute *devattr, |
| const char *buf, size_t count) |
| { |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| struct adt7470_data *data = dev_get_drvdata(dev); |
| struct i2c_client *client = data->client; |
| long temp; |
| |
| if (kstrtol(buf, 10, &temp) || !temp) |
| return -EINVAL; |
| |
| temp = FAN_RPM_TO_PERIOD(temp); |
| temp = clamp_val(temp, 1, 65534); |
| |
| mutex_lock(&data->lock); |
| data->fan_min[attr->index] = temp; |
| adt7470_write_word_data(client, ADT7470_REG_FAN_MIN(attr->index), temp); |
| mutex_unlock(&data->lock); |
| |
| return count; |
| } |
| |
| static ssize_t fan_show(struct device *dev, struct device_attribute *devattr, |
| char *buf) |
| { |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| struct adt7470_data *data = adt7470_update_device(dev); |
| |
| if (FAN_DATA_VALID(data->fan[attr->index])) |
| return sprintf(buf, "%d\n", |
| FAN_PERIOD_TO_RPM(data->fan[attr->index])); |
| else |
| return sprintf(buf, "0\n"); |
| } |
| |
| static ssize_t force_pwm_max_show(struct device *dev, |
| struct device_attribute *devattr, char *buf) |
| { |
| struct adt7470_data *data = adt7470_update_device(dev); |
| return sprintf(buf, "%d\n", data->force_pwm_max); |
| } |
| |
| static ssize_t force_pwm_max_store(struct device *dev, |
| struct device_attribute *devattr, |
| const char *buf, size_t count) |
| { |
| struct adt7470_data *data = dev_get_drvdata(dev); |
| struct i2c_client *client = data->client; |
| long temp; |
| u8 reg; |
| |
| if (kstrtol(buf, 10, &temp)) |
| return -EINVAL; |
| |
| mutex_lock(&data->lock); |
| data->force_pwm_max = temp; |
| reg = i2c_smbus_read_byte_data(client, ADT7470_REG_CFG); |
| if (temp) |
| reg |= ADT7470_FSPD_MASK; |
| else |
| reg &= ~ADT7470_FSPD_MASK; |
| i2c_smbus_write_byte_data(client, ADT7470_REG_CFG, reg); |
| mutex_unlock(&data->lock); |
| |
| return count; |
| } |
| |
| static ssize_t pwm_show(struct device *dev, struct device_attribute *devattr, |
| char *buf) |
| { |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| struct adt7470_data *data = adt7470_update_device(dev); |
| return sprintf(buf, "%d\n", data->pwm[attr->index]); |
| } |
| |
| static ssize_t pwm_store(struct device *dev, struct device_attribute *devattr, |
| const char *buf, size_t count) |
| { |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| struct adt7470_data *data = dev_get_drvdata(dev); |
| struct i2c_client *client = data->client; |
| long temp; |
| |
| if (kstrtol(buf, 10, &temp)) |
| return -EINVAL; |
| |
| temp = clamp_val(temp, 0, 255); |
| |
| mutex_lock(&data->lock); |
| data->pwm[attr->index] = temp; |
| i2c_smbus_write_byte_data(client, ADT7470_REG_PWM(attr->index), temp); |
| mutex_unlock(&data->lock); |
| |
| return count; |
| } |
| |
| /* These are the valid PWM frequencies to the nearest Hz */ |
| static const int adt7470_freq_map[] = { |
| 11, 15, 22, 29, 35, 44, 59, 88, 1400, 22500 |
| }; |
| |
| static ssize_t pwm1_freq_show(struct device *dev, |
| struct device_attribute *devattr, char *buf) |
| { |
| struct adt7470_data *data = adt7470_update_device(dev); |
| unsigned char cfg_reg_1; |
| unsigned char cfg_reg_2; |
| int index; |
| |
| mutex_lock(&data->lock); |
| cfg_reg_1 = i2c_smbus_read_byte_data(data->client, ADT7470_REG_CFG); |
| cfg_reg_2 = i2c_smbus_read_byte_data(data->client, ADT7470_REG_CFG_2); |
| mutex_unlock(&data->lock); |
| |
| index = (cfg_reg_2 & ADT7470_FREQ_MASK) >> ADT7470_FREQ_SHIFT; |
| if (!(cfg_reg_1 & ADT7470_CFG_LF)) |
| index += 8; |
| if (index >= ARRAY_SIZE(adt7470_freq_map)) |
| index = ARRAY_SIZE(adt7470_freq_map) - 1; |
| |
| return scnprintf(buf, PAGE_SIZE, "%d\n", adt7470_freq_map[index]); |
| } |
| |
| static ssize_t pwm1_freq_store(struct device *dev, |
| struct device_attribute *devattr, |
| const char *buf, size_t count) |
| { |
| struct adt7470_data *data = dev_get_drvdata(dev); |
| struct i2c_client *client = data->client; |
| long freq; |
| int index; |
| int low_freq = ADT7470_CFG_LF; |
| unsigned char val; |
| |
| if (kstrtol(buf, 10, &freq)) |
| return -EINVAL; |
| |
| /* Round the user value given to the closest available frequency */ |
| index = find_closest(freq, adt7470_freq_map, |
| ARRAY_SIZE(adt7470_freq_map)); |
| |
| if (index >= 8) { |
| index -= 8; |
| low_freq = 0; |
| } |
| |
| mutex_lock(&data->lock); |
| /* Configuration Register 1 */ |
| val = i2c_smbus_read_byte_data(client, ADT7470_REG_CFG); |
| i2c_smbus_write_byte_data(client, ADT7470_REG_CFG, |
| (val & ~ADT7470_CFG_LF) | low_freq); |
| /* Configuration Register 2 */ |
| val = i2c_smbus_read_byte_data(client, ADT7470_REG_CFG_2); |
| i2c_smbus_write_byte_data(client, ADT7470_REG_CFG_2, |
| (val & ~ADT7470_FREQ_MASK) | (index << ADT7470_FREQ_SHIFT)); |
| mutex_unlock(&data->lock); |
| |
| return count; |
| } |
| |
| static ssize_t pwm_max_show(struct device *dev, |
| struct device_attribute *devattr, char *buf) |
| { |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| struct adt7470_data *data = adt7470_update_device(dev); |
| return sprintf(buf, "%d\n", data->pwm_max[attr->index]); |
| } |
| |
| static ssize_t pwm_max_store(struct device *dev, |
| struct device_attribute *devattr, |
| const char *buf, size_t count) |
| { |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| struct adt7470_data *data = dev_get_drvdata(dev); |
| struct i2c_client *client = data->client; |
| long temp; |
| |
| if (kstrtol(buf, 10, &temp)) |
| return -EINVAL; |
| |
| temp = clamp_val(temp, 0, 255); |
| |
| mutex_lock(&data->lock); |
| data->pwm_max[attr->index] = temp; |
| i2c_smbus_write_byte_data(client, ADT7470_REG_PWM_MAX(attr->index), |
| temp); |
| mutex_unlock(&data->lock); |
| |
| return count; |
| } |
| |
| static ssize_t pwm_min_show(struct device *dev, |
| struct device_attribute *devattr, char *buf) |
| { |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| struct adt7470_data *data = adt7470_update_device(dev); |
| return sprintf(buf, "%d\n", data->pwm_min[attr->index]); |
| } |
| |
| static ssize_t pwm_min_store(struct device *dev, |
| struct device_attribute *devattr, |
| const char *buf, size_t count) |
| { |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| struct adt7470_data *data = dev_get_drvdata(dev); |
| struct i2c_client *client = data->client; |
| long temp; |
| |
| if (kstrtol(buf, 10, &temp)) |
| return -EINVAL; |
| |
| temp = clamp_val(temp, 0, 255); |
| |
| mutex_lock(&data->lock); |
| data->pwm_min[attr->index] = temp; |
| i2c_smbus_write_byte_data(client, ADT7470_REG_PWM_MIN(attr->index), |
| temp); |
| mutex_unlock(&data->lock); |
| |
| return count; |
| } |
| |
| static ssize_t pwm_tmax_show(struct device *dev, |
| struct device_attribute *devattr, char *buf) |
| { |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| struct adt7470_data *data = adt7470_update_device(dev); |
| /* the datasheet says that tmax = tmin + 20C */ |
| return sprintf(buf, "%d\n", 1000 * (20 + data->pwm_tmin[attr->index])); |
| } |
| |
| static ssize_t pwm_tmin_show(struct device *dev, |
| struct device_attribute *devattr, char *buf) |
| { |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| struct adt7470_data *data = adt7470_update_device(dev); |
| return sprintf(buf, "%d\n", 1000 * data->pwm_tmin[attr->index]); |
| } |
| |
| static ssize_t pwm_tmin_store(struct device *dev, |
| struct device_attribute *devattr, |
| const char *buf, size_t count) |
| { |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| struct adt7470_data *data = dev_get_drvdata(dev); |
| struct i2c_client *client = data->client; |
| long temp; |
| |
| if (kstrtol(buf, 10, &temp)) |
| return -EINVAL; |
| |
| temp = clamp_val(temp, -128000, 127000); |
| temp = DIV_ROUND_CLOSEST(temp, 1000); |
| |
| mutex_lock(&data->lock); |
| data->pwm_tmin[attr->index] = temp; |
| i2c_smbus_write_byte_data(client, ADT7470_REG_PWM_TMIN(attr->index), |
| temp); |
| mutex_unlock(&data->lock); |
| |
| return count; |
| } |
| |
| static ssize_t pwm_auto_show(struct device *dev, |
| struct device_attribute *devattr, char *buf) |
| { |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| struct adt7470_data *data = adt7470_update_device(dev); |
| return sprintf(buf, "%d\n", 1 + data->pwm_automatic[attr->index]); |
| } |
| |
| static ssize_t pwm_auto_store(struct device *dev, |
| struct device_attribute *devattr, |
| const char *buf, size_t count) |
| { |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| struct adt7470_data *data = dev_get_drvdata(dev); |
| struct i2c_client *client = data->client; |
| int pwm_auto_reg = ADT7470_REG_PWM_CFG(attr->index); |
| int pwm_auto_reg_mask; |
| long temp; |
| u8 reg; |
| |
| if (kstrtol(buf, 10, &temp)) |
| return -EINVAL; |
| |
| if (attr->index % 2) |
| pwm_auto_reg_mask = ADT7470_PWM2_AUTO_MASK; |
| else |
| pwm_auto_reg_mask = ADT7470_PWM1_AUTO_MASK; |
| |
| if (temp != 2 && temp != 1) |
| return -EINVAL; |
| temp--; |
| |
| mutex_lock(&data->lock); |
| data->pwm_automatic[attr->index] = temp; |
| reg = i2c_smbus_read_byte_data(client, pwm_auto_reg); |
| if (temp) |
| reg |= pwm_auto_reg_mask; |
| else |
| reg &= ~pwm_auto_reg_mask; |
| i2c_smbus_write_byte_data(client, pwm_auto_reg, reg); |
| mutex_unlock(&data->lock); |
| |
| return count; |
| } |
| |
| static ssize_t pwm_auto_temp_show(struct device *dev, |
| struct device_attribute *devattr, char *buf) |
| { |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| struct adt7470_data *data = adt7470_update_device(dev); |
| u8 ctrl = data->pwm_auto_temp[attr->index]; |
| |
| if (ctrl) |
| return sprintf(buf, "%d\n", 1 << (ctrl - 1)); |
| else |
| return sprintf(buf, "%d\n", ADT7470_PWM_ALL_TEMPS); |
| } |
| |
| static int cvt_auto_temp(int input) |
| { |
| if (input == ADT7470_PWM_ALL_TEMPS) |
| return 0; |
| if (input < 1 || !is_power_of_2(input)) |
| return -EINVAL; |
| return ilog2(input) + 1; |
| } |
| |
| static ssize_t pwm_auto_temp_store(struct device *dev, |
| struct device_attribute *devattr, |
| const char *buf, size_t count) |
| { |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| struct adt7470_data *data = dev_get_drvdata(dev); |
| struct i2c_client *client = data->client; |
| int pwm_auto_reg = ADT7470_REG_PWM_AUTO_TEMP(attr->index); |
| long temp; |
| u8 reg; |
| |
| if (kstrtol(buf, 10, &temp)) |
| return -EINVAL; |
| |
| temp = cvt_auto_temp(temp); |
| if (temp < 0) |
| return temp; |
| |
| mutex_lock(&data->lock); |
| data->pwm_automatic[attr->index] = temp; |
| reg = i2c_smbus_read_byte_data(client, pwm_auto_reg); |
| |
| if (!(attr->index % 2)) { |
| reg &= 0xF; |
| reg |= (temp << 4) & 0xF0; |
| } else { |
| reg &= 0xF0; |
| reg |= temp & 0xF; |
| } |
| |
| i2c_smbus_write_byte_data(client, pwm_auto_reg, reg); |
| mutex_unlock(&data->lock); |
| |
| return count; |
| } |
| |
| static ssize_t alarm_show(struct device *dev, |
| struct device_attribute *devattr, char *buf) |
| { |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| struct adt7470_data *data = adt7470_update_device(dev); |
| |
| if (data->alarm & attr->index) |
| return sprintf(buf, "1\n"); |
| else |
| return sprintf(buf, "0\n"); |
| } |
| |
| static DEVICE_ATTR_RW(alarm_mask); |
| static DEVICE_ATTR_RW(num_temp_sensors); |
| static DEVICE_ATTR_RW(auto_update_interval); |
| |
| static SENSOR_DEVICE_ATTR_RW(temp1_max, temp_max, 0); |
| static SENSOR_DEVICE_ATTR_RW(temp2_max, temp_max, 1); |
| static SENSOR_DEVICE_ATTR_RW(temp3_max, temp_max, 2); |
| static SENSOR_DEVICE_ATTR_RW(temp4_max, temp_max, 3); |
| static SENSOR_DEVICE_ATTR_RW(temp5_max, temp_max, 4); |
| static SENSOR_DEVICE_ATTR_RW(temp6_max, temp_max, 5); |
| static SENSOR_DEVICE_ATTR_RW(temp7_max, temp_max, 6); |
| static SENSOR_DEVICE_ATTR_RW(temp8_max, temp_max, 7); |
| static SENSOR_DEVICE_ATTR_RW(temp9_max, temp_max, 8); |
| static SENSOR_DEVICE_ATTR_RW(temp10_max, temp_max, 9); |
| |
| static SENSOR_DEVICE_ATTR_RW(temp1_min, temp_min, 0); |
| static SENSOR_DEVICE_ATTR_RW(temp2_min, temp_min, 1); |
| static SENSOR_DEVICE_ATTR_RW(temp3_min, temp_min, 2); |
| static SENSOR_DEVICE_ATTR_RW(temp4_min, temp_min, 3); |
| static SENSOR_DEVICE_ATTR_RW(temp5_min, temp_min, 4); |
| static SENSOR_DEVICE_ATTR_RW(temp6_min, temp_min, 5); |
| static SENSOR_DEVICE_ATTR_RW(temp7_min, temp_min, 6); |
| static SENSOR_DEVICE_ATTR_RW(temp8_min, temp_min, 7); |
| static SENSOR_DEVICE_ATTR_RW(temp9_min, temp_min, 8); |
| static SENSOR_DEVICE_ATTR_RW(temp10_min, temp_min, 9); |
| |
| static SENSOR_DEVICE_ATTR_RO(temp1_input, temp, 0); |
| static SENSOR_DEVICE_ATTR_RO(temp2_input, temp, 1); |
| static SENSOR_DEVICE_ATTR_RO(temp3_input, temp, 2); |
| static SENSOR_DEVICE_ATTR_RO(temp4_input, temp, 3); |
| static SENSOR_DEVICE_ATTR_RO(temp5_input, temp, 4); |
| static SENSOR_DEVICE_ATTR_RO(temp6_input, temp, 5); |
| static SENSOR_DEVICE_ATTR_RO(temp7_input, temp, 6); |
| static SENSOR_DEVICE_ATTR_RO(temp8_input, temp, 7); |
| static SENSOR_DEVICE_ATTR_RO(temp9_input, temp, 8); |
| static SENSOR_DEVICE_ATTR_RO(temp10_input, temp, 9); |
| |
| static SENSOR_DEVICE_ATTR_RO(temp1_alarm, alarm, ADT7470_R1T_ALARM); |
| static SENSOR_DEVICE_ATTR_RO(temp2_alarm, alarm, ADT7470_R2T_ALARM); |
| static SENSOR_DEVICE_ATTR_RO(temp3_alarm, alarm, ADT7470_R3T_ALARM); |
| static SENSOR_DEVICE_ATTR_RO(temp4_alarm, alarm, ADT7470_R4T_ALARM); |
| static SENSOR_DEVICE_ATTR_RO(temp5_alarm, alarm, ADT7470_R5T_ALARM); |
| static SENSOR_DEVICE_ATTR_RO(temp6_alarm, alarm, ADT7470_R6T_ALARM); |
| static SENSOR_DEVICE_ATTR_RO(temp7_alarm, alarm, ADT7470_R7T_ALARM); |
| static SENSOR_DEVICE_ATTR_RO(temp8_alarm, alarm, ALARM2(ADT7470_R8T_ALARM)); |
| static SENSOR_DEVICE_ATTR_RO(temp9_alarm, alarm, ALARM2(ADT7470_R9T_ALARM)); |
| static SENSOR_DEVICE_ATTR_RO(temp10_alarm, alarm, ALARM2(ADT7470_R10T_ALARM)); |
| |
| static SENSOR_DEVICE_ATTR_RW(fan1_max, fan_max, 0); |
| static SENSOR_DEVICE_ATTR_RW(fan2_max, fan_max, 1); |
| static SENSOR_DEVICE_ATTR_RW(fan3_max, fan_max, 2); |
| static SENSOR_DEVICE_ATTR_RW(fan4_max, fan_max, 3); |
| |
| static SENSOR_DEVICE_ATTR_RW(fan1_min, fan_min, 0); |
| static SENSOR_DEVICE_ATTR_RW(fan2_min, fan_min, 1); |
| static SENSOR_DEVICE_ATTR_RW(fan3_min, fan_min, 2); |
| static SENSOR_DEVICE_ATTR_RW(fan4_min, fan_min, 3); |
| |
| static SENSOR_DEVICE_ATTR_RO(fan1_input, fan, 0); |
| static SENSOR_DEVICE_ATTR_RO(fan2_input, fan, 1); |
| static SENSOR_DEVICE_ATTR_RO(fan3_input, fan, 2); |
| static SENSOR_DEVICE_ATTR_RO(fan4_input, fan, 3); |
| |
| static SENSOR_DEVICE_ATTR_RO(fan1_alarm, alarm, ALARM2(ADT7470_FAN1_ALARM)); |
| static SENSOR_DEVICE_ATTR_RO(fan2_alarm, alarm, ALARM2(ADT7470_FAN2_ALARM)); |
| static SENSOR_DEVICE_ATTR_RO(fan3_alarm, alarm, ALARM2(ADT7470_FAN3_ALARM)); |
| static SENSOR_DEVICE_ATTR_RO(fan4_alarm, alarm, ALARM2(ADT7470_FAN4_ALARM)); |
| |
| static SENSOR_DEVICE_ATTR_RW(force_pwm_max, force_pwm_max, 0); |
| |
| static SENSOR_DEVICE_ATTR_RW(pwm1, pwm, 0); |
| static SENSOR_DEVICE_ATTR_RW(pwm2, pwm, 1); |
| static SENSOR_DEVICE_ATTR_RW(pwm3, pwm, 2); |
| static SENSOR_DEVICE_ATTR_RW(pwm4, pwm, 3); |
| |
| static DEVICE_ATTR_RW(pwm1_freq); |
| |
| static SENSOR_DEVICE_ATTR_RW(pwm1_auto_point1_pwm, pwm_min, 0); |
| static SENSOR_DEVICE_ATTR_RW(pwm2_auto_point1_pwm, pwm_min, 1); |
| static SENSOR_DEVICE_ATTR_RW(pwm3_auto_point1_pwm, pwm_min, 2); |
| static SENSOR_DEVICE_ATTR_RW(pwm4_auto_point1_pwm, pwm_min, 3); |
| |
| static SENSOR_DEVICE_ATTR_RW(pwm1_auto_point2_pwm, pwm_max, 0); |
| static SENSOR_DEVICE_ATTR_RW(pwm2_auto_point2_pwm, pwm_max, 1); |
| static SENSOR_DEVICE_ATTR_RW(pwm3_auto_point2_pwm, pwm_max, 2); |
| static SENSOR_DEVICE_ATTR_RW(pwm4_auto_point2_pwm, pwm_max, 3); |
| |
| static SENSOR_DEVICE_ATTR_RW(pwm1_auto_point1_temp, pwm_tmin, 0); |
| static SENSOR_DEVICE_ATTR_RW(pwm2_auto_point1_temp, pwm_tmin, 1); |
| static SENSOR_DEVICE_ATTR_RW(pwm3_auto_point1_temp, pwm_tmin, 2); |
| static SENSOR_DEVICE_ATTR_RW(pwm4_auto_point1_temp, pwm_tmin, 3); |
| |
| static SENSOR_DEVICE_ATTR_RO(pwm1_auto_point2_temp, pwm_tmax, 0); |
| static SENSOR_DEVICE_ATTR_RO(pwm2_auto_point2_temp, pwm_tmax, 1); |
| static SENSOR_DEVICE_ATTR_RO(pwm3_auto_point2_temp, pwm_tmax, 2); |
| static SENSOR_DEVICE_ATTR_RO(pwm4_auto_point2_temp, pwm_tmax, 3); |
| |
| static SENSOR_DEVICE_ATTR_RW(pwm1_enable, pwm_auto, 0); |
| static SENSOR_DEVICE_ATTR_RW(pwm2_enable, pwm_auto, 1); |
| static SENSOR_DEVICE_ATTR_RW(pwm3_enable, pwm_auto, 2); |
| static SENSOR_DEVICE_ATTR_RW(pwm4_enable, pwm_auto, 3); |
| |
| static SENSOR_DEVICE_ATTR_RW(pwm1_auto_channels_temp, pwm_auto_temp, 0); |
| static SENSOR_DEVICE_ATTR_RW(pwm2_auto_channels_temp, pwm_auto_temp, 1); |
| static SENSOR_DEVICE_ATTR_RW(pwm3_auto_channels_temp, pwm_auto_temp, 2); |
| static SENSOR_DEVICE_ATTR_RW(pwm4_auto_channels_temp, pwm_auto_temp, 3); |
| |
| static struct attribute *adt7470_attrs[] = { |
| &dev_attr_alarm_mask.attr, |
| &dev_attr_num_temp_sensors.attr, |
| &dev_attr_auto_update_interval.attr, |
| &sensor_dev_attr_temp1_max.dev_attr.attr, |
| &sensor_dev_attr_temp2_max.dev_attr.attr, |
| &sensor_dev_attr_temp3_max.dev_attr.attr, |
| &sensor_dev_attr_temp4_max.dev_attr.attr, |
| &sensor_dev_attr_temp5_max.dev_attr.attr, |
| &sensor_dev_attr_temp6_max.dev_attr.attr, |
| &sensor_dev_attr_temp7_max.dev_attr.attr, |
| &sensor_dev_attr_temp8_max.dev_attr.attr, |
| &sensor_dev_attr_temp9_max.dev_attr.attr, |
| &sensor_dev_attr_temp10_max.dev_attr.attr, |
| &sensor_dev_attr_temp1_min.dev_attr.attr, |
| &sensor_dev_attr_temp2_min.dev_attr.attr, |
| &sensor_dev_attr_temp3_min.dev_attr.attr, |
| &sensor_dev_attr_temp4_min.dev_attr.attr, |
| &sensor_dev_attr_temp5_min.dev_attr.attr, |
| &sensor_dev_attr_temp6_min.dev_attr.attr, |
| &sensor_dev_attr_temp7_min.dev_attr.attr, |
| &sensor_dev_attr_temp8_min.dev_attr.attr, |
| &sensor_dev_attr_temp9_min.dev_attr.attr, |
| &sensor_dev_attr_temp10_min.dev_attr.attr, |
| &sensor_dev_attr_temp1_input.dev_attr.attr, |
| &sensor_dev_attr_temp2_input.dev_attr.attr, |
| &sensor_dev_attr_temp3_input.dev_attr.attr, |
| &sensor_dev_attr_temp4_input.dev_attr.attr, |
| &sensor_dev_attr_temp5_input.dev_attr.attr, |
| &sensor_dev_attr_temp6_input.dev_attr.attr, |
| &sensor_dev_attr_temp7_input.dev_attr.attr, |
| &sensor_dev_attr_temp8_input.dev_attr.attr, |
| &sensor_dev_attr_temp9_input.dev_attr.attr, |
| &sensor_dev_attr_temp10_input.dev_attr.attr, |
| &sensor_dev_attr_temp1_alarm.dev_attr.attr, |
| &sensor_dev_attr_temp2_alarm.dev_attr.attr, |
| &sensor_dev_attr_temp3_alarm.dev_attr.attr, |
| &sensor_dev_attr_temp4_alarm.dev_attr.attr, |
| &sensor_dev_attr_temp5_alarm.dev_attr.attr, |
| &sensor_dev_attr_temp6_alarm.dev_attr.attr, |
| &sensor_dev_attr_temp7_alarm.dev_attr.attr, |
| &sensor_dev_attr_temp8_alarm.dev_attr.attr, |
| &sensor_dev_attr_temp9_alarm.dev_attr.attr, |
| &sensor_dev_attr_temp10_alarm.dev_attr.attr, |
| &sensor_dev_attr_fan1_max.dev_attr.attr, |
| &sensor_dev_attr_fan2_max.dev_attr.attr, |
| &sensor_dev_attr_fan3_max.dev_attr.attr, |
| &sensor_dev_attr_fan4_max.dev_attr.attr, |
| &sensor_dev_attr_fan1_min.dev_attr.attr, |
| &sensor_dev_attr_fan2_min.dev_attr.attr, |
| &sensor_dev_attr_fan3_min.dev_attr.attr, |
| &sensor_dev_attr_fan4_min.dev_attr.attr, |
| &sensor_dev_attr_fan1_input.dev_attr.attr, |
| &sensor_dev_attr_fan2_input.dev_attr.attr, |
| &sensor_dev_attr_fan3_input.dev_attr.attr, |
| &sensor_dev_attr_fan4_input.dev_attr.attr, |
| &sensor_dev_attr_fan1_alarm.dev_attr.attr, |
| &sensor_dev_attr_fan2_alarm.dev_attr.attr, |
| &sensor_dev_attr_fan3_alarm.dev_attr.attr, |
| &sensor_dev_attr_fan4_alarm.dev_attr.attr, |
| &sensor_dev_attr_force_pwm_max.dev_attr.attr, |
| &sensor_dev_attr_pwm1.dev_attr.attr, |
| &dev_attr_pwm1_freq.attr, |
| &sensor_dev_attr_pwm2.dev_attr.attr, |
| &sensor_dev_attr_pwm3.dev_attr.attr, |
| &sensor_dev_attr_pwm4.dev_attr.attr, |
| &sensor_dev_attr_pwm1_auto_point1_pwm.dev_attr.attr, |
| &sensor_dev_attr_pwm2_auto_point1_pwm.dev_attr.attr, |
| &sensor_dev_attr_pwm3_auto_point1_pwm.dev_attr.attr, |
| &sensor_dev_attr_pwm4_auto_point1_pwm.dev_attr.attr, |
| &sensor_dev_attr_pwm1_auto_point2_pwm.dev_attr.attr, |
| &sensor_dev_attr_pwm2_auto_point2_pwm.dev_attr.attr, |
| &sensor_dev_attr_pwm3_auto_point2_pwm.dev_attr.attr, |
| &sensor_dev_attr_pwm4_auto_point2_pwm.dev_attr.attr, |
| &sensor_dev_attr_pwm1_auto_point1_temp.dev_attr.attr, |
| &sensor_dev_attr_pwm2_auto_point1_temp.dev_attr.attr, |
| &sensor_dev_attr_pwm3_auto_point1_temp.dev_attr.attr, |
| &sensor_dev_attr_pwm4_auto_point1_temp.dev_attr.attr, |
| &sensor_dev_attr_pwm1_auto_point2_temp.dev_attr.attr, |
| &sensor_dev_attr_pwm2_auto_point2_temp.dev_attr.attr, |
| &sensor_dev_attr_pwm3_auto_point2_temp.dev_attr.attr, |
| &sensor_dev_attr_pwm4_auto_point2_temp.dev_attr.attr, |
| &sensor_dev_attr_pwm1_enable.dev_attr.attr, |
| &sensor_dev_attr_pwm2_enable.dev_attr.attr, |
| &sensor_dev_attr_pwm3_enable.dev_attr.attr, |
| &sensor_dev_attr_pwm4_enable.dev_attr.attr, |
| &sensor_dev_attr_pwm1_auto_channels_temp.dev_attr.attr, |
| &sensor_dev_attr_pwm2_auto_channels_temp.dev_attr.attr, |
| &sensor_dev_attr_pwm3_auto_channels_temp.dev_attr.attr, |
| &sensor_dev_attr_pwm4_auto_channels_temp.dev_attr.attr, |
| NULL |
| }; |
| |
| ATTRIBUTE_GROUPS(adt7470); |
| |
| /* Return 0 if detection is successful, -ENODEV otherwise */ |
| static int adt7470_detect(struct i2c_client *client, |
| struct i2c_board_info *info) |
| { |
| struct i2c_adapter *adapter = client->adapter; |
| int vendor, device, revision; |
| |
| if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) |
| return -ENODEV; |
| |
| vendor = i2c_smbus_read_byte_data(client, ADT7470_REG_VENDOR); |
| if (vendor != ADT7470_VENDOR) |
| return -ENODEV; |
| |
| device = i2c_smbus_read_byte_data(client, ADT7470_REG_DEVICE); |
| if (device != ADT7470_DEVICE) |
| return -ENODEV; |
| |
| revision = i2c_smbus_read_byte_data(client, ADT7470_REG_REVISION); |
| if (revision != ADT7470_REVISION) |
| return -ENODEV; |
| |
| strlcpy(info->type, "adt7470", I2C_NAME_SIZE); |
| |
| return 0; |
| } |
| |
| static void adt7470_init_client(struct i2c_client *client) |
| { |
| int reg = i2c_smbus_read_byte_data(client, ADT7470_REG_CFG); |
| |
| if (reg < 0) { |
| dev_err(&client->dev, "cannot read configuration register\n"); |
| } else { |
| /* start monitoring (and do a self-test) */ |
| i2c_smbus_write_byte_data(client, ADT7470_REG_CFG, reg | 3); |
| } |
| } |
| |
| static int adt7470_probe(struct i2c_client *client) |
| { |
| struct device *dev = &client->dev; |
| struct adt7470_data *data; |
| struct device *hwmon_dev; |
| |
| data = devm_kzalloc(dev, sizeof(struct adt7470_data), GFP_KERNEL); |
| if (!data) |
| return -ENOMEM; |
| |
| data->num_temp_sensors = -1; |
| data->auto_update_interval = AUTO_UPDATE_INTERVAL; |
| |
| i2c_set_clientdata(client, data); |
| data->client = client; |
| mutex_init(&data->lock); |
| |
| dev_info(&client->dev, "%s chip found\n", client->name); |
| |
| /* Initialize the ADT7470 chip */ |
| adt7470_init_client(client); |
| |
| /* Register sysfs hooks */ |
| hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name, |
| data, |
| adt7470_groups); |
| |
| if (IS_ERR(hwmon_dev)) |
| return PTR_ERR(hwmon_dev); |
| |
| data->auto_update = kthread_run(adt7470_update_thread, client, "%s", |
| dev_name(hwmon_dev)); |
| if (IS_ERR(data->auto_update)) { |
| return PTR_ERR(data->auto_update); |
| } |
| |
| return 0; |
| } |
| |
| static int adt7470_remove(struct i2c_client *client) |
| { |
| struct adt7470_data *data = i2c_get_clientdata(client); |
| |
| kthread_stop(data->auto_update); |
| return 0; |
| } |
| |
| static const struct i2c_device_id adt7470_id[] = { |
| { "adt7470", 0 }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(i2c, adt7470_id); |
| |
| static struct i2c_driver adt7470_driver = { |
| .class = I2C_CLASS_HWMON, |
| .driver = { |
| .name = "adt7470", |
| }, |
| .probe_new = adt7470_probe, |
| .remove = adt7470_remove, |
| .id_table = adt7470_id, |
| .detect = adt7470_detect, |
| .address_list = normal_i2c, |
| }; |
| |
| module_i2c_driver(adt7470_driver); |
| |
| MODULE_AUTHOR("Darrick J. Wong <darrick.wong@oracle.com>"); |
| MODULE_DESCRIPTION("ADT7470 driver"); |
| MODULE_LICENSE("GPL"); |