| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* Driver for Realtek PCI-Express card reader |
| * |
| * Copyright(c) 2018-2019 Realtek Semiconductor Corp. All rights reserved. |
| * |
| * Author: |
| * Ricky WU <ricky_wu@realtek.com> |
| * Rui FENG <rui_feng@realsil.com.cn> |
| * Wei WANG <wei_wang@realsil.com.cn> |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/delay.h> |
| #include <linux/rtsx_pci.h> |
| |
| #include "rts5228.h" |
| #include "rtsx_pcr.h" |
| |
| static u8 rts5228_get_ic_version(struct rtsx_pcr *pcr) |
| { |
| u8 val; |
| |
| rtsx_pci_read_register(pcr, DUMMY_REG_RESET_0, &val); |
| return val & IC_VERSION_MASK; |
| } |
| |
| static void rts5228_fill_driving(struct rtsx_pcr *pcr, u8 voltage) |
| { |
| u8 driving_3v3[4][3] = { |
| {0x13, 0x13, 0x13}, |
| {0x96, 0x96, 0x96}, |
| {0x7F, 0x7F, 0x7F}, |
| {0x96, 0x96, 0x96}, |
| }; |
| u8 driving_1v8[4][3] = { |
| {0x99, 0x99, 0x99}, |
| {0xB5, 0xB5, 0xB5}, |
| {0xE6, 0x7E, 0xFE}, |
| {0x6B, 0x6B, 0x6B}, |
| }; |
| u8 (*driving)[3], drive_sel; |
| |
| if (voltage == OUTPUT_3V3) { |
| driving = driving_3v3; |
| drive_sel = pcr->sd30_drive_sel_3v3; |
| } else { |
| driving = driving_1v8; |
| drive_sel = pcr->sd30_drive_sel_1v8; |
| } |
| |
| rtsx_pci_write_register(pcr, SD30_CLK_DRIVE_SEL, |
| 0xFF, driving[drive_sel][0]); |
| |
| rtsx_pci_write_register(pcr, SD30_CMD_DRIVE_SEL, |
| 0xFF, driving[drive_sel][1]); |
| |
| rtsx_pci_write_register(pcr, SD30_DAT_DRIVE_SEL, |
| 0xFF, driving[drive_sel][2]); |
| } |
| |
| static void rtsx5228_fetch_vendor_settings(struct rtsx_pcr *pcr) |
| { |
| struct pci_dev *pdev = pcr->pci; |
| u32 reg; |
| |
| /* 0x724~0x727 */ |
| pci_read_config_dword(pdev, PCR_SETTING_REG1, ®); |
| pcr_dbg(pcr, "Cfg 0x%x: 0x%x\n", PCR_SETTING_REG1, reg); |
| |
| if (!rtsx_vendor_setting_valid(reg)) { |
| pcr_dbg(pcr, "skip fetch vendor setting\n"); |
| return; |
| } |
| pcr->sd30_drive_sel_1v8 = rtsx_reg_to_sd30_drive_sel_1v8(reg); |
| pcr->aspm_en = rtsx_reg_to_aspm(reg); |
| |
| /* 0x814~0x817 */ |
| pci_read_config_dword(pdev, PCR_SETTING_REG2, ®); |
| pcr_dbg(pcr, "Cfg 0x%x: 0x%x\n", PCR_SETTING_REG2, reg); |
| |
| pcr->rtd3_en = rtsx_reg_to_rtd3(reg); |
| if (rtsx_check_mmc_support(reg)) |
| pcr->extra_caps |= EXTRA_CAPS_NO_MMC; |
| pcr->sd30_drive_sel_3v3 = rtsx_reg_to_sd30_drive_sel_3v3(reg); |
| if (rtsx_reg_check_reverse_socket(reg)) |
| pcr->flags |= PCR_REVERSE_SOCKET; |
| } |
| |
| static int rts5228_optimize_phy(struct rtsx_pcr *pcr) |
| { |
| return rtsx_pci_write_phy_register(pcr, 0x07, 0x8F40); |
| } |
| |
| static void rts5228_force_power_down(struct rtsx_pcr *pcr, u8 pm_state) |
| { |
| /* Set relink_time to 0 */ |
| rtsx_pci_write_register(pcr, AUTOLOAD_CFG_BASE + 1, MASK_8_BIT_DEF, 0); |
| rtsx_pci_write_register(pcr, AUTOLOAD_CFG_BASE + 2, MASK_8_BIT_DEF, 0); |
| rtsx_pci_write_register(pcr, AUTOLOAD_CFG_BASE + 3, |
| RELINK_TIME_MASK, 0); |
| |
| rtsx_pci_write_register(pcr, pcr->reg_pm_ctrl3, |
| D3_DELINK_MODE_EN, D3_DELINK_MODE_EN); |
| |
| rtsx_pci_write_register(pcr, FPDCTL, |
| SSC_POWER_DOWN, SSC_POWER_DOWN); |
| } |
| |
| static int rts5228_enable_auto_blink(struct rtsx_pcr *pcr) |
| { |
| return rtsx_pci_write_register(pcr, OLT_LED_CTL, |
| LED_SHINE_MASK, LED_SHINE_EN); |
| } |
| |
| static int rts5228_disable_auto_blink(struct rtsx_pcr *pcr) |
| { |
| return rtsx_pci_write_register(pcr, OLT_LED_CTL, |
| LED_SHINE_MASK, LED_SHINE_DISABLE); |
| } |
| |
| static int rts5228_turn_on_led(struct rtsx_pcr *pcr) |
| { |
| return rtsx_pci_write_register(pcr, GPIO_CTL, |
| 0x02, 0x02); |
| } |
| |
| static int rts5228_turn_off_led(struct rtsx_pcr *pcr) |
| { |
| return rtsx_pci_write_register(pcr, GPIO_CTL, |
| 0x02, 0x00); |
| } |
| |
| /* SD Pull Control Enable: |
| * SD_DAT[3:0] ==> pull up |
| * SD_CD ==> pull up |
| * SD_WP ==> pull up |
| * SD_CMD ==> pull up |
| * SD_CLK ==> pull down |
| */ |
| static const u32 rts5228_sd_pull_ctl_enable_tbl[] = { |
| RTSX_REG_PAIR(CARD_PULL_CTL2, 0xAA), |
| RTSX_REG_PAIR(CARD_PULL_CTL3, 0xE9), |
| 0, |
| }; |
| |
| /* SD Pull Control Disable: |
| * SD_DAT[3:0] ==> pull down |
| * SD_CD ==> pull up |
| * SD_WP ==> pull down |
| * SD_CMD ==> pull down |
| * SD_CLK ==> pull down |
| */ |
| static const u32 rts5228_sd_pull_ctl_disable_tbl[] = { |
| RTSX_REG_PAIR(CARD_PULL_CTL2, 0x55), |
| RTSX_REG_PAIR(CARD_PULL_CTL3, 0xD5), |
| 0, |
| }; |
| |
| static int rts5228_sd_set_sample_push_timing_sd30(struct rtsx_pcr *pcr) |
| { |
| rtsx_pci_write_register(pcr, SD_CFG1, SD_MODE_SELECT_MASK |
| | SD_ASYNC_FIFO_NOT_RST, SD_30_MODE | SD_ASYNC_FIFO_NOT_RST); |
| rtsx_pci_write_register(pcr, CLK_CTL, CLK_LOW_FREQ, CLK_LOW_FREQ); |
| rtsx_pci_write_register(pcr, CARD_CLK_SOURCE, 0xFF, |
| CRC_VAR_CLK0 | SD30_FIX_CLK | SAMPLE_VAR_CLK1); |
| rtsx_pci_write_register(pcr, CLK_CTL, CLK_LOW_FREQ, 0); |
| |
| return 0; |
| } |
| |
| static int rts5228_card_power_on(struct rtsx_pcr *pcr, int card) |
| { |
| struct rtsx_cr_option *option = &pcr->option; |
| |
| if (option->ocp_en) |
| rtsx_pci_enable_ocp(pcr); |
| |
| rtsx_pci_write_register(pcr, REG_CRC_DUMMY_0, |
| CFG_SD_POW_AUTO_PD, CFG_SD_POW_AUTO_PD); |
| |
| rtsx_pci_write_register(pcr, RTS5228_LDO1_CFG1, |
| RTS5228_LDO1_TUNE_MASK, RTS5228_LDO1_33); |
| |
| rtsx_pci_write_register(pcr, RTS5228_LDO1233318_POW_CTL, |
| RTS5228_LDO1_POWERON_MASK, RTS5228_LDO1_SOFTSTART); |
| mdelay(2); |
| rtsx_pci_write_register(pcr, RTS5228_LDO1233318_POW_CTL, |
| RTS5228_LDO1_POWERON_MASK, RTS5228_LDO1_FULLON); |
| |
| |
| rtsx_pci_write_register(pcr, RTS5228_LDO1233318_POW_CTL, |
| RTS5228_LDO3318_POWERON, RTS5228_LDO3318_POWERON); |
| |
| msleep(20); |
| |
| rtsx_pci_write_register(pcr, CARD_OE, SD_OUTPUT_EN, SD_OUTPUT_EN); |
| |
| /* Initialize SD_CFG1 register */ |
| rtsx_pci_write_register(pcr, SD_CFG1, 0xFF, |
| SD_CLK_DIVIDE_128 | SD_20_MODE | SD_BUS_WIDTH_1BIT); |
| |
| rtsx_pci_write_register(pcr, SD_SAMPLE_POINT_CTL, |
| 0xFF, SD20_RX_POS_EDGE); |
| rtsx_pci_write_register(pcr, SD_PUSH_POINT_CTL, 0xFF, 0); |
| rtsx_pci_write_register(pcr, CARD_STOP, SD_STOP | SD_CLR_ERR, |
| SD_STOP | SD_CLR_ERR); |
| |
| /* Reset SD_CFG3 register */ |
| rtsx_pci_write_register(pcr, SD_CFG3, SD30_CLK_END_EN, 0); |
| rtsx_pci_write_register(pcr, REG_SD_STOP_SDCLK_CFG, |
| SD30_CLK_STOP_CFG_EN | SD30_CLK_STOP_CFG1 | |
| SD30_CLK_STOP_CFG0, 0); |
| |
| if (pcr->extra_caps & EXTRA_CAPS_SD_SDR50 || |
| pcr->extra_caps & EXTRA_CAPS_SD_SDR104) |
| rts5228_sd_set_sample_push_timing_sd30(pcr); |
| |
| return 0; |
| } |
| |
| static int rts5228_switch_output_voltage(struct rtsx_pcr *pcr, u8 voltage) |
| { |
| int err; |
| u16 val = 0; |
| |
| rtsx_pci_write_register(pcr, RTS5228_CARD_PWR_CTL, |
| RTS5228_PUPDC, RTS5228_PUPDC); |
| |
| switch (voltage) { |
| case OUTPUT_3V3: |
| rtsx_pci_read_phy_register(pcr, PHY_TUNE, &val); |
| val |= PHY_TUNE_SDBUS_33; |
| err = rtsx_pci_write_phy_register(pcr, PHY_TUNE, val); |
| if (err < 0) |
| return err; |
| |
| rtsx_pci_write_register(pcr, RTS5228_DV3318_CFG, |
| RTS5228_DV3318_TUNE_MASK, RTS5228_DV3318_33); |
| rtsx_pci_write_register(pcr, SD_PAD_CTL, |
| SD_IO_USING_1V8, 0); |
| break; |
| case OUTPUT_1V8: |
| rtsx_pci_read_phy_register(pcr, PHY_TUNE, &val); |
| val &= ~PHY_TUNE_SDBUS_33; |
| err = rtsx_pci_write_phy_register(pcr, PHY_TUNE, val); |
| if (err < 0) |
| return err; |
| |
| rtsx_pci_write_register(pcr, RTS5228_DV3318_CFG, |
| RTS5228_DV3318_TUNE_MASK, RTS5228_DV3318_18); |
| rtsx_pci_write_register(pcr, SD_PAD_CTL, |
| SD_IO_USING_1V8, SD_IO_USING_1V8); |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| /* set pad drive */ |
| rts5228_fill_driving(pcr, voltage); |
| |
| return 0; |
| } |
| |
| static void rts5228_stop_cmd(struct rtsx_pcr *pcr) |
| { |
| rtsx_pci_writel(pcr, RTSX_HCBCTLR, STOP_CMD); |
| rtsx_pci_writel(pcr, RTSX_HDBCTLR, STOP_DMA); |
| rtsx_pci_write_register(pcr, RTS5260_DMA_RST_CTL_0, |
| RTS5260_DMA_RST | RTS5260_ADMA3_RST, |
| RTS5260_DMA_RST | RTS5260_ADMA3_RST); |
| rtsx_pci_write_register(pcr, RBCTL, RB_FLUSH, RB_FLUSH); |
| } |
| |
| static void rts5228_card_before_power_off(struct rtsx_pcr *pcr) |
| { |
| rts5228_stop_cmd(pcr); |
| rts5228_switch_output_voltage(pcr, OUTPUT_3V3); |
| } |
| |
| static void rts5228_enable_ocp(struct rtsx_pcr *pcr) |
| { |
| u8 val = 0; |
| |
| val = SD_OCP_INT_EN | SD_DETECT_EN; |
| rtsx_pci_write_register(pcr, REG_OCPCTL, 0xFF, val); |
| rtsx_pci_write_register(pcr, RTS5228_LDO1_CFG0, |
| RTS5228_LDO1_OCP_EN | RTS5228_LDO1_OCP_LMT_EN, |
| RTS5228_LDO1_OCP_EN | RTS5228_LDO1_OCP_LMT_EN); |
| } |
| |
| static void rts5228_disable_ocp(struct rtsx_pcr *pcr) |
| { |
| u8 mask = 0; |
| |
| mask = SD_OCP_INT_EN | SD_DETECT_EN; |
| rtsx_pci_write_register(pcr, REG_OCPCTL, mask, 0); |
| rtsx_pci_write_register(pcr, RTS5228_LDO1_CFG0, |
| RTS5228_LDO1_OCP_EN | RTS5228_LDO1_OCP_LMT_EN, 0); |
| } |
| |
| static int rts5228_card_power_off(struct rtsx_pcr *pcr, int card) |
| { |
| int err = 0; |
| |
| rts5228_card_before_power_off(pcr); |
| err = rtsx_pci_write_register(pcr, RTS5228_LDO1233318_POW_CTL, |
| RTS5228_LDO_POWERON_MASK, 0); |
| rtsx_pci_write_register(pcr, REG_CRC_DUMMY_0, CFG_SD_POW_AUTO_PD, 0); |
| |
| if (pcr->option.ocp_en) |
| rtsx_pci_disable_ocp(pcr); |
| |
| return err; |
| } |
| |
| static void rts5228_init_ocp(struct rtsx_pcr *pcr) |
| { |
| struct rtsx_cr_option *option = &pcr->option; |
| |
| if (option->ocp_en) { |
| u8 mask, val; |
| |
| rtsx_pci_write_register(pcr, RTS5228_LDO1_CFG0, |
| RTS5228_LDO1_OCP_EN | RTS5228_LDO1_OCP_LMT_EN, |
| RTS5228_LDO1_OCP_EN | RTS5228_LDO1_OCP_LMT_EN); |
| |
| rtsx_pci_write_register(pcr, RTS5228_LDO1_CFG0, |
| RTS5228_LDO1_OCP_THD_MASK, option->sd_800mA_ocp_thd); |
| |
| rtsx_pci_write_register(pcr, RTS5228_LDO1_CFG0, |
| RTS5228_LDO1_OCP_LMT_THD_MASK, |
| RTS5228_LDO1_LMT_THD_1500); |
| |
| rtsx_pci_read_register(pcr, RTS5228_LDO1_CFG0, &val); |
| |
| mask = SD_OCP_GLITCH_MASK; |
| val = pcr->hw_param.ocp_glitch; |
| rtsx_pci_write_register(pcr, REG_OCPGLITCH, mask, val); |
| |
| rts5228_enable_ocp(pcr); |
| |
| } else { |
| rtsx_pci_write_register(pcr, RTS5228_LDO1_CFG0, |
| RTS5228_LDO1_OCP_EN | RTS5228_LDO1_OCP_LMT_EN, 0); |
| } |
| } |
| |
| static void rts5228_clear_ocpstat(struct rtsx_pcr *pcr) |
| { |
| u8 mask = 0; |
| u8 val = 0; |
| |
| mask = SD_OCP_INT_CLR | SD_OC_CLR; |
| val = SD_OCP_INT_CLR | SD_OC_CLR; |
| |
| rtsx_pci_write_register(pcr, REG_OCPCTL, mask, val); |
| |
| udelay(1000); |
| rtsx_pci_write_register(pcr, REG_OCPCTL, mask, 0); |
| |
| } |
| |
| static void rts5228_process_ocp(struct rtsx_pcr *pcr) |
| { |
| if (!pcr->option.ocp_en) |
| return; |
| |
| rtsx_pci_get_ocpstat(pcr, &pcr->ocp_stat); |
| |
| if (pcr->ocp_stat & (SD_OC_NOW | SD_OC_EVER)) { |
| rts5228_clear_ocpstat(pcr); |
| rts5228_card_power_off(pcr, RTSX_SD_CARD); |
| rtsx_pci_write_register(pcr, CARD_OE, SD_OUTPUT_EN, 0); |
| pcr->ocp_stat = 0; |
| } |
| |
| } |
| |
| static void rts5228_init_from_cfg(struct rtsx_pcr *pcr) |
| { |
| struct pci_dev *pdev = pcr->pci; |
| int l1ss; |
| u32 lval; |
| struct rtsx_cr_option *option = &pcr->option; |
| |
| l1ss = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_L1SS); |
| if (!l1ss) |
| return; |
| |
| pci_read_config_dword(pdev, l1ss + PCI_L1SS_CTL1, &lval); |
| |
| if (0 == (lval & 0x0F)) |
| rtsx_pci_enable_oobs_polling(pcr); |
| else |
| rtsx_pci_disable_oobs_polling(pcr); |
| |
| if (lval & PCI_L1SS_CTL1_ASPM_L1_1) |
| rtsx_set_dev_flag(pcr, ASPM_L1_1_EN); |
| else |
| rtsx_clear_dev_flag(pcr, ASPM_L1_1_EN); |
| |
| if (lval & PCI_L1SS_CTL1_ASPM_L1_2) |
| rtsx_set_dev_flag(pcr, ASPM_L1_2_EN); |
| else |
| rtsx_clear_dev_flag(pcr, ASPM_L1_2_EN); |
| |
| if (lval & PCI_L1SS_CTL1_PCIPM_L1_1) |
| rtsx_set_dev_flag(pcr, PM_L1_1_EN); |
| else |
| rtsx_clear_dev_flag(pcr, PM_L1_1_EN); |
| |
| if (lval & PCI_L1SS_CTL1_PCIPM_L1_2) |
| rtsx_set_dev_flag(pcr, PM_L1_2_EN); |
| else |
| rtsx_clear_dev_flag(pcr, PM_L1_2_EN); |
| |
| rtsx_pci_write_register(pcr, ASPM_FORCE_CTL, 0xFF, 0); |
| if (option->ltr_en) { |
| u16 val; |
| |
| pcie_capability_read_word(pcr->pci, PCI_EXP_DEVCTL2, &val); |
| if (val & PCI_EXP_DEVCTL2_LTR_EN) { |
| option->ltr_enabled = true; |
| option->ltr_active = true; |
| rtsx_set_ltr_latency(pcr, option->ltr_active_latency); |
| } else { |
| option->ltr_enabled = false; |
| } |
| } |
| |
| if (rtsx_check_dev_flag(pcr, ASPM_L1_1_EN | ASPM_L1_2_EN |
| | PM_L1_1_EN | PM_L1_2_EN)) |
| option->force_clkreq_0 = false; |
| else |
| option->force_clkreq_0 = true; |
| } |
| |
| static int rts5228_extra_init_hw(struct rtsx_pcr *pcr) |
| { |
| struct rtsx_cr_option *option = &pcr->option; |
| |
| rtsx_pci_write_register(pcr, RTS5228_AUTOLOAD_CFG1, |
| CD_RESUME_EN_MASK, CD_RESUME_EN_MASK); |
| |
| rts5228_init_from_cfg(pcr); |
| |
| rtsx_pci_write_register(pcr, L1SUB_CONFIG1, |
| AUX_CLK_ACTIVE_SEL_MASK, MAC_CKSW_DONE); |
| rtsx_pci_write_register(pcr, L1SUB_CONFIG3, 0xFF, 0); |
| |
| rtsx_pci_write_register(pcr, FUNC_FORCE_CTL, |
| FUNC_FORCE_UPME_XMT_DBG, FUNC_FORCE_UPME_XMT_DBG); |
| |
| rtsx_pci_write_register(pcr, PCLK_CTL, |
| PCLK_MODE_SEL, PCLK_MODE_SEL); |
| |
| rtsx_pci_write_register(pcr, PM_EVENT_DEBUG, PME_DEBUG_0, PME_DEBUG_0); |
| rtsx_pci_write_register(pcr, PM_CLK_FORCE_CTL, CLK_PM_EN, CLK_PM_EN); |
| |
| /* LED shine disabled, set initial shine cycle period */ |
| rtsx_pci_write_register(pcr, OLT_LED_CTL, 0x0F, 0x02); |
| |
| /* Configure driving */ |
| rts5228_fill_driving(pcr, OUTPUT_3V3); |
| |
| if (pcr->flags & PCR_REVERSE_SOCKET) |
| rtsx_pci_write_register(pcr, PETXCFG, 0x30, 0x30); |
| else |
| rtsx_pci_write_register(pcr, PETXCFG, 0x30, 0x00); |
| |
| /* |
| * If u_force_clkreq_0 is enabled, CLKREQ# PIN will be forced |
| * to drive low, and we forcibly request clock. |
| */ |
| if (option->force_clkreq_0) |
| rtsx_pci_write_register(pcr, PETXCFG, |
| FORCE_CLKREQ_DELINK_MASK, FORCE_CLKREQ_LOW); |
| else |
| rtsx_pci_write_register(pcr, PETXCFG, |
| FORCE_CLKREQ_DELINK_MASK, FORCE_CLKREQ_HIGH); |
| |
| rtsx_pci_write_register(pcr, PWD_SUSPEND_EN, 0xFF, 0xFB); |
| rtsx_pci_write_register(pcr, pcr->reg_pm_ctrl3, 0x10, 0x00); |
| rtsx_pci_write_register(pcr, RTS5228_REG_PME_FORCE_CTL, |
| FORCE_PM_CONTROL | FORCE_PM_VALUE, FORCE_PM_CONTROL); |
| |
| return 0; |
| } |
| |
| static void rts5228_enable_aspm(struct rtsx_pcr *pcr, bool enable) |
| { |
| u8 mask, val; |
| |
| if (pcr->aspm_enabled == enable) |
| return; |
| |
| mask = FORCE_ASPM_VAL_MASK | FORCE_ASPM_CTL0 | FORCE_ASPM_CTL1; |
| val = FORCE_ASPM_CTL0 | FORCE_ASPM_CTL1; |
| val |= (pcr->aspm_en & 0x02); |
| rtsx_pci_write_register(pcr, ASPM_FORCE_CTL, mask, val); |
| pcie_capability_clear_and_set_word(pcr->pci, PCI_EXP_LNKCTL, |
| PCI_EXP_LNKCTL_ASPMC, pcr->aspm_en); |
| pcr->aspm_enabled = enable; |
| } |
| |
| static void rts5228_disable_aspm(struct rtsx_pcr *pcr, bool enable) |
| { |
| u8 mask, val; |
| |
| if (pcr->aspm_enabled == enable) |
| return; |
| |
| pcie_capability_clear_and_set_word(pcr->pci, PCI_EXP_LNKCTL, |
| PCI_EXP_LNKCTL_ASPMC, 0); |
| mask = FORCE_ASPM_VAL_MASK | FORCE_ASPM_CTL0 | FORCE_ASPM_CTL1; |
| val = FORCE_ASPM_CTL0 | FORCE_ASPM_CTL1; |
| rtsx_pci_write_register(pcr, ASPM_FORCE_CTL, mask, val); |
| rtsx_pci_write_register(pcr, SD_CFG1, SD_ASYNC_FIFO_NOT_RST, 0); |
| mdelay(10); |
| pcr->aspm_enabled = enable; |
| } |
| |
| static void rts5228_set_aspm(struct rtsx_pcr *pcr, bool enable) |
| { |
| if (enable) |
| rts5228_enable_aspm(pcr, true); |
| else |
| rts5228_disable_aspm(pcr, false); |
| } |
| |
| static void rts5228_set_l1off_cfg_sub_d0(struct rtsx_pcr *pcr, int active) |
| { |
| struct rtsx_cr_option *option = &pcr->option; |
| int aspm_L1_1, aspm_L1_2; |
| u8 val = 0; |
| |
| aspm_L1_1 = rtsx_check_dev_flag(pcr, ASPM_L1_1_EN); |
| aspm_L1_2 = rtsx_check_dev_flag(pcr, ASPM_L1_2_EN); |
| |
| if (active) { |
| /* run, latency: 60us */ |
| if (aspm_L1_1) |
| val = option->ltr_l1off_snooze_sspwrgate; |
| } else { |
| /* l1off, latency: 300us */ |
| if (aspm_L1_2) |
| val = option->ltr_l1off_sspwrgate; |
| } |
| |
| rtsx_set_l1off_sub(pcr, val); |
| } |
| |
| static const struct pcr_ops rts5228_pcr_ops = { |
| .fetch_vendor_settings = rtsx5228_fetch_vendor_settings, |
| .turn_on_led = rts5228_turn_on_led, |
| .turn_off_led = rts5228_turn_off_led, |
| .extra_init_hw = rts5228_extra_init_hw, |
| .enable_auto_blink = rts5228_enable_auto_blink, |
| .disable_auto_blink = rts5228_disable_auto_blink, |
| .card_power_on = rts5228_card_power_on, |
| .card_power_off = rts5228_card_power_off, |
| .switch_output_voltage = rts5228_switch_output_voltage, |
| .force_power_down = rts5228_force_power_down, |
| .stop_cmd = rts5228_stop_cmd, |
| .set_aspm = rts5228_set_aspm, |
| .set_l1off_cfg_sub_d0 = rts5228_set_l1off_cfg_sub_d0, |
| .enable_ocp = rts5228_enable_ocp, |
| .disable_ocp = rts5228_disable_ocp, |
| .init_ocp = rts5228_init_ocp, |
| .process_ocp = rts5228_process_ocp, |
| .clear_ocpstat = rts5228_clear_ocpstat, |
| .optimize_phy = rts5228_optimize_phy, |
| }; |
| |
| |
| static inline u8 double_ssc_depth(u8 depth) |
| { |
| return ((depth > 1) ? (depth - 1) : depth); |
| } |
| |
| int rts5228_pci_switch_clock(struct rtsx_pcr *pcr, unsigned int card_clock, |
| u8 ssc_depth, bool initial_mode, bool double_clk, bool vpclk) |
| { |
| int err, clk; |
| u16 n; |
| u8 clk_divider, mcu_cnt, div; |
| static const u8 depth[] = { |
| [RTSX_SSC_DEPTH_4M] = RTS5228_SSC_DEPTH_4M, |
| [RTSX_SSC_DEPTH_2M] = RTS5228_SSC_DEPTH_2M, |
| [RTSX_SSC_DEPTH_1M] = RTS5228_SSC_DEPTH_1M, |
| [RTSX_SSC_DEPTH_500K] = RTS5228_SSC_DEPTH_512K, |
| }; |
| |
| if (initial_mode) { |
| /* We use 250k(around) here, in initial stage */ |
| clk_divider = SD_CLK_DIVIDE_128; |
| card_clock = 30000000; |
| } else { |
| clk_divider = SD_CLK_DIVIDE_0; |
| } |
| err = rtsx_pci_write_register(pcr, SD_CFG1, |
| SD_CLK_DIVIDE_MASK, clk_divider); |
| if (err < 0) |
| return err; |
| |
| card_clock /= 1000000; |
| pcr_dbg(pcr, "Switch card clock to %dMHz\n", card_clock); |
| |
| clk = card_clock; |
| if (!initial_mode && double_clk) |
| clk = card_clock * 2; |
| pcr_dbg(pcr, "Internal SSC clock: %dMHz (cur_clock = %d)\n", |
| clk, pcr->cur_clock); |
| |
| if (clk == pcr->cur_clock) |
| return 0; |
| |
| if (pcr->ops->conv_clk_and_div_n) |
| n = pcr->ops->conv_clk_and_div_n(clk, CLK_TO_DIV_N); |
| else |
| n = clk - 4; |
| if ((clk <= 4) || (n > 396)) |
| return -EINVAL; |
| |
| mcu_cnt = 125/clk + 3; |
| if (mcu_cnt > 15) |
| mcu_cnt = 15; |
| |
| div = CLK_DIV_1; |
| while ((n < MIN_DIV_N_PCR - 4) && (div < CLK_DIV_8)) { |
| if (pcr->ops->conv_clk_and_div_n) { |
| int dbl_clk = pcr->ops->conv_clk_and_div_n(n, |
| DIV_N_TO_CLK) * 2; |
| n = pcr->ops->conv_clk_and_div_n(dbl_clk, |
| CLK_TO_DIV_N); |
| } else { |
| n = (n + 4) * 2 - 4; |
| } |
| div++; |
| } |
| |
| n = (n / 2) - 1; |
| pcr_dbg(pcr, "n = %d, div = %d\n", n, div); |
| |
| ssc_depth = depth[ssc_depth]; |
| if (double_clk) |
| ssc_depth = double_ssc_depth(ssc_depth); |
| |
| if (ssc_depth) { |
| if (div == CLK_DIV_2) { |
| if (ssc_depth > 1) |
| ssc_depth -= 1; |
| else |
| ssc_depth = RTS5228_SSC_DEPTH_8M; |
| } else if (div == CLK_DIV_4) { |
| if (ssc_depth > 2) |
| ssc_depth -= 2; |
| else |
| ssc_depth = RTS5228_SSC_DEPTH_8M; |
| } else if (div == CLK_DIV_8) { |
| if (ssc_depth > 3) |
| ssc_depth -= 3; |
| else |
| ssc_depth = RTS5228_SSC_DEPTH_8M; |
| } |
| } else { |
| ssc_depth = 0; |
| } |
| pcr_dbg(pcr, "ssc_depth = %d\n", ssc_depth); |
| |
| rtsx_pci_init_cmd(pcr); |
| rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CLK_CTL, |
| CLK_LOW_FREQ, CLK_LOW_FREQ); |
| rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CLK_DIV, |
| 0xFF, (div << 4) | mcu_cnt); |
| rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SSC_CTL1, SSC_RSTB, 0); |
| rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SSC_CTL2, |
| SSC_DEPTH_MASK, ssc_depth); |
| rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SSC_DIV_N_0, 0xFF, n); |
| rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SSC_CTL1, SSC_RSTB, SSC_RSTB); |
| if (vpclk) { |
| rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_VPCLK0_CTL, |
| PHASE_NOT_RESET, 0); |
| rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_VPCLK1_CTL, |
| PHASE_NOT_RESET, 0); |
| rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_VPCLK0_CTL, |
| PHASE_NOT_RESET, PHASE_NOT_RESET); |
| rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_VPCLK1_CTL, |
| PHASE_NOT_RESET, PHASE_NOT_RESET); |
| } |
| |
| err = rtsx_pci_send_cmd(pcr, 2000); |
| if (err < 0) |
| return err; |
| |
| /* Wait SSC clock stable */ |
| udelay(SSC_CLOCK_STABLE_WAIT); |
| err = rtsx_pci_write_register(pcr, CLK_CTL, CLK_LOW_FREQ, 0); |
| if (err < 0) |
| return err; |
| |
| pcr->cur_clock = clk; |
| return 0; |
| |
| } |
| |
| void rts5228_init_params(struct rtsx_pcr *pcr) |
| { |
| struct rtsx_cr_option *option = &pcr->option; |
| struct rtsx_hw_param *hw_param = &pcr->hw_param; |
| |
| pcr->extra_caps = EXTRA_CAPS_SD_SDR50 | EXTRA_CAPS_SD_SDR104; |
| pcr->num_slots = 1; |
| pcr->ops = &rts5228_pcr_ops; |
| |
| pcr->flags = 0; |
| pcr->card_drive_sel = RTSX_CARD_DRIVE_DEFAULT; |
| pcr->sd30_drive_sel_1v8 = CFG_DRIVER_TYPE_B; |
| pcr->sd30_drive_sel_3v3 = CFG_DRIVER_TYPE_B; |
| pcr->aspm_en = ASPM_L1_EN; |
| pcr->tx_initial_phase = SET_CLOCK_PHASE(28, 27, 11); |
| pcr->rx_initial_phase = SET_CLOCK_PHASE(24, 6, 5); |
| |
| pcr->ic_version = rts5228_get_ic_version(pcr); |
| pcr->sd_pull_ctl_enable_tbl = rts5228_sd_pull_ctl_enable_tbl; |
| pcr->sd_pull_ctl_disable_tbl = rts5228_sd_pull_ctl_disable_tbl; |
| |
| pcr->reg_pm_ctrl3 = RTS5228_AUTOLOAD_CFG3; |
| |
| option->dev_flags = (LTR_L1SS_PWR_GATE_CHECK_CARD_EN |
| | LTR_L1SS_PWR_GATE_EN); |
| option->ltr_en = true; |
| |
| /* init latency of active, idle, L1OFF to 60us, 300us, 3ms */ |
| option->ltr_active_latency = LTR_ACTIVE_LATENCY_DEF; |
| option->ltr_idle_latency = LTR_IDLE_LATENCY_DEF; |
| option->ltr_l1off_latency = LTR_L1OFF_LATENCY_DEF; |
| option->l1_snooze_delay = L1_SNOOZE_DELAY_DEF; |
| option->ltr_l1off_sspwrgate = 0x7F; |
| option->ltr_l1off_snooze_sspwrgate = 0x78; |
| |
| option->ocp_en = 1; |
| hw_param->interrupt_en |= SD_OC_INT_EN; |
| hw_param->ocp_glitch = SD_OCP_GLITCH_800U; |
| option->sd_800mA_ocp_thd = RTS5228_LDO1_OCP_THD_930; |
| } |