| // SPDX-License-Identifier: GPL-2.0-or-later | 
 | /* | 
 |  * Asus PC WMI hotkey driver | 
 |  * | 
 |  * Copyright(C) 2010 Intel Corporation. | 
 |  * Copyright(C) 2010-2011 Corentin Chary <corentin.chary@gmail.com> | 
 |  * | 
 |  * Portions based on wistron_btns.c: | 
 |  * Copyright (C) 2005 Miloslav Trmac <mitr@volny.cz> | 
 |  * Copyright (C) 2005 Bernhard Rosenkraenzer <bero@arklinux.org> | 
 |  * Copyright (C) 2005 Dmitry Torokhov <dtor@mail.ru> | 
 |  */ | 
 |  | 
 | #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt | 
 |  | 
 | #include <linux/kernel.h> | 
 | #include <linux/module.h> | 
 | #include <linux/init.h> | 
 | #include <linux/types.h> | 
 | #include <linux/slab.h> | 
 | #include <linux/input.h> | 
 | #include <linux/input/sparse-keymap.h> | 
 | #include <linux/fb.h> | 
 | #include <linux/backlight.h> | 
 | #include <linux/leds.h> | 
 | #include <linux/rfkill.h> | 
 | #include <linux/pci.h> | 
 | #include <linux/pci_hotplug.h> | 
 | #include <linux/power_supply.h> | 
 | #include <linux/hwmon.h> | 
 | #include <linux/hwmon-sysfs.h> | 
 | #include <linux/debugfs.h> | 
 | #include <linux/seq_file.h> | 
 | #include <linux/platform_data/x86/asus-wmi.h> | 
 | #include <linux/platform_device.h> | 
 | #include <linux/thermal.h> | 
 | #include <linux/acpi.h> | 
 | #include <linux/dmi.h> | 
 |  | 
 | #include <acpi/battery.h> | 
 | #include <acpi/video.h> | 
 |  | 
 | #include "asus-wmi.h" | 
 |  | 
 | MODULE_AUTHOR("Corentin Chary <corentin.chary@gmail.com>, " | 
 | 	      "Yong Wang <yong.y.wang@intel.com>"); | 
 | MODULE_DESCRIPTION("Asus Generic WMI Driver"); | 
 | MODULE_LICENSE("GPL"); | 
 |  | 
 | #define to_asus_wmi_driver(pdrv)					\ | 
 | 	(container_of((pdrv), struct asus_wmi_driver, platform_driver)) | 
 |  | 
 | #define ASUS_WMI_MGMT_GUID	"97845ED0-4E6D-11DE-8A39-0800200C9A66" | 
 |  | 
 | #define NOTIFY_BRNUP_MIN		0x11 | 
 | #define NOTIFY_BRNUP_MAX		0x1f | 
 | #define NOTIFY_BRNDOWN_MIN		0x20 | 
 | #define NOTIFY_BRNDOWN_MAX		0x2e | 
 | #define NOTIFY_FNLOCK_TOGGLE		0x4e | 
 | #define NOTIFY_KBD_BRTUP		0xc4 | 
 | #define NOTIFY_KBD_BRTDWN		0xc5 | 
 | #define NOTIFY_KBD_BRTTOGGLE		0xc7 | 
 | #define NOTIFY_KBD_FBM			0x99 | 
 |  | 
 | #define ASUS_WMI_FNLOCK_BIOS_DISABLED	BIT(0) | 
 |  | 
 | #define ASUS_FAN_DESC			"cpu_fan" | 
 | #define ASUS_FAN_MFUN			0x13 | 
 | #define ASUS_FAN_SFUN_READ		0x06 | 
 | #define ASUS_FAN_SFUN_WRITE		0x07 | 
 |  | 
 | /* Based on standard hwmon pwmX_enable values */ | 
 | #define ASUS_FAN_CTRL_FULLSPEED		0 | 
 | #define ASUS_FAN_CTRL_MANUAL		1 | 
 | #define ASUS_FAN_CTRL_AUTO		2 | 
 |  | 
 | #define ASUS_FAN_BOOST_MODE_NORMAL		0 | 
 | #define ASUS_FAN_BOOST_MODE_OVERBOOST		1 | 
 | #define ASUS_FAN_BOOST_MODE_OVERBOOST_MASK	0x01 | 
 | #define ASUS_FAN_BOOST_MODE_SILENT		2 | 
 | #define ASUS_FAN_BOOST_MODE_SILENT_MASK		0x02 | 
 | #define ASUS_FAN_BOOST_MODES_MASK		0x03 | 
 |  | 
 | #define USB_INTEL_XUSB2PR		0xD0 | 
 | #define PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_XHCI	0x9c31 | 
 |  | 
 | #define ASUS_ACPI_UID_ASUSWMI		"ASUSWMI" | 
 | #define ASUS_ACPI_UID_ATK		"ATK" | 
 |  | 
 | #define WMI_EVENT_QUEUE_SIZE		0x10 | 
 | #define WMI_EVENT_QUEUE_END		0x1 | 
 | #define WMI_EVENT_MASK			0xFFFF | 
 | /* The WMI hotkey event value is always the same. */ | 
 | #define WMI_EVENT_VALUE_ATK		0xFF | 
 |  | 
 | #define WMI_EVENT_MASK			0xFFFF | 
 |  | 
 | static const char * const ashs_ids[] = { "ATK4001", "ATK4002", NULL }; | 
 |  | 
 | static bool ashs_present(void) | 
 | { | 
 | 	int i = 0; | 
 | 	while (ashs_ids[i]) { | 
 | 		if (acpi_dev_found(ashs_ids[i++])) | 
 | 			return true; | 
 | 	} | 
 | 	return false; | 
 | } | 
 |  | 
 | struct bios_args { | 
 | 	u32 arg0; | 
 | 	u32 arg1; | 
 | 	u32 arg2; /* At least TUF Gaming series uses 3 dword input buffer. */ | 
 | } __packed; | 
 |  | 
 | /* | 
 |  * Struct that's used for all methods called via AGFN. Naming is | 
 |  * identically to the AML code. | 
 |  */ | 
 | struct agfn_args { | 
 | 	u16 mfun; /* probably "Multi-function" to be called */ | 
 | 	u16 sfun; /* probably "Sub-function" to be called */ | 
 | 	u16 len;  /* size of the hole struct, including subfunction fields */ | 
 | 	u8 stas;  /* not used by now */ | 
 | 	u8 err;   /* zero on success */ | 
 | } __packed; | 
 |  | 
 | /* struct used for calling fan read and write methods */ | 
 | struct agfn_fan_args { | 
 | 	struct agfn_args agfn;	/* common fields */ | 
 | 	u8 fan;			/* fan number: 0: set auto mode 1: 1st fan */ | 
 | 	u32 speed;		/* read: RPM/100 - write: 0-255 */ | 
 | } __packed; | 
 |  | 
 | /* | 
 |  * <platform>/    - debugfs root directory | 
 |  *   dev_id      - current dev_id | 
 |  *   ctrl_param  - current ctrl_param | 
 |  *   method_id   - current method_id | 
 |  *   devs        - call DEVS(dev_id, ctrl_param) and print result | 
 |  *   dsts        - call DSTS(dev_id)  and print result | 
 |  *   call        - call method_id(dev_id, ctrl_param) and print result | 
 |  */ | 
 | struct asus_wmi_debug { | 
 | 	struct dentry *root; | 
 | 	u32 method_id; | 
 | 	u32 dev_id; | 
 | 	u32 ctrl_param; | 
 | }; | 
 |  | 
 | struct asus_rfkill { | 
 | 	struct asus_wmi *asus; | 
 | 	struct rfkill *rfkill; | 
 | 	u32 dev_id; | 
 | }; | 
 |  | 
 | enum fan_type { | 
 | 	FAN_TYPE_NONE = 0, | 
 | 	FAN_TYPE_AGFN,		/* deprecated on newer platforms */ | 
 | 	FAN_TYPE_SPEC83,	/* starting in Spec 8.3, use CPU_FAN_CTRL */ | 
 | }; | 
 |  | 
 | struct asus_wmi { | 
 | 	int dsts_id; | 
 | 	int spec; | 
 | 	int sfun; | 
 | 	bool wmi_event_queue; | 
 |  | 
 | 	struct input_dev *inputdev; | 
 | 	struct backlight_device *backlight_device; | 
 | 	struct platform_device *platform_device; | 
 |  | 
 | 	struct led_classdev wlan_led; | 
 | 	int wlan_led_wk; | 
 | 	struct led_classdev tpd_led; | 
 | 	int tpd_led_wk; | 
 | 	struct led_classdev kbd_led; | 
 | 	int kbd_led_wk; | 
 | 	struct led_classdev lightbar_led; | 
 | 	int lightbar_led_wk; | 
 | 	struct workqueue_struct *led_workqueue; | 
 | 	struct work_struct tpd_led_work; | 
 | 	struct work_struct wlan_led_work; | 
 | 	struct work_struct lightbar_led_work; | 
 |  | 
 | 	struct asus_rfkill wlan; | 
 | 	struct asus_rfkill bluetooth; | 
 | 	struct asus_rfkill wimax; | 
 | 	struct asus_rfkill wwan3g; | 
 | 	struct asus_rfkill gps; | 
 | 	struct asus_rfkill uwb; | 
 |  | 
 | 	enum fan_type fan_type; | 
 | 	int fan_pwm_mode; | 
 | 	int agfn_pwm; | 
 |  | 
 | 	bool fan_boost_mode_available; | 
 | 	u8 fan_boost_mode_mask; | 
 | 	u8 fan_boost_mode; | 
 |  | 
 | 	// The RSOC controls the maximum charging percentage. | 
 | 	bool battery_rsoc_available; | 
 |  | 
 | 	struct hotplug_slot hotplug_slot; | 
 | 	struct mutex hotplug_lock; | 
 | 	struct mutex wmi_lock; | 
 | 	struct workqueue_struct *hotplug_workqueue; | 
 | 	struct work_struct hotplug_work; | 
 |  | 
 | 	bool fnlock_locked; | 
 |  | 
 | 	struct asus_wmi_debug debug; | 
 |  | 
 | 	struct asus_wmi_driver *driver; | 
 | }; | 
 |  | 
 | /* Input **********************************************************************/ | 
 |  | 
 | static int asus_wmi_input_init(struct asus_wmi *asus) | 
 | { | 
 | 	int err; | 
 |  | 
 | 	asus->inputdev = input_allocate_device(); | 
 | 	if (!asus->inputdev) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	asus->inputdev->name = asus->driver->input_name; | 
 | 	asus->inputdev->phys = asus->driver->input_phys; | 
 | 	asus->inputdev->id.bustype = BUS_HOST; | 
 | 	asus->inputdev->dev.parent = &asus->platform_device->dev; | 
 | 	set_bit(EV_REP, asus->inputdev->evbit); | 
 |  | 
 | 	err = sparse_keymap_setup(asus->inputdev, asus->driver->keymap, NULL); | 
 | 	if (err) | 
 | 		goto err_free_dev; | 
 |  | 
 | 	err = input_register_device(asus->inputdev); | 
 | 	if (err) | 
 | 		goto err_free_dev; | 
 |  | 
 | 	return 0; | 
 |  | 
 | err_free_dev: | 
 | 	input_free_device(asus->inputdev); | 
 | 	return err; | 
 | } | 
 |  | 
 | static void asus_wmi_input_exit(struct asus_wmi *asus) | 
 | { | 
 | 	if (asus->inputdev) | 
 | 		input_unregister_device(asus->inputdev); | 
 |  | 
 | 	asus->inputdev = NULL; | 
 | } | 
 |  | 
 | /* WMI ************************************************************************/ | 
 |  | 
 | static int asus_wmi_evaluate_method3(u32 method_id, | 
 | 		u32 arg0, u32 arg1, u32 arg2, u32 *retval) | 
 | { | 
 | 	struct bios_args args = { | 
 | 		.arg0 = arg0, | 
 | 		.arg1 = arg1, | 
 | 		.arg2 = arg2, | 
 | 	}; | 
 | 	struct acpi_buffer input = { (acpi_size) sizeof(args), &args }; | 
 | 	struct acpi_buffer output = { ACPI_ALLOCATE_BUFFER, NULL }; | 
 | 	acpi_status status; | 
 | 	union acpi_object *obj; | 
 | 	u32 tmp = 0; | 
 |  | 
 | 	status = wmi_evaluate_method(ASUS_WMI_MGMT_GUID, 0, method_id, | 
 | 				     &input, &output); | 
 |  | 
 | 	if (ACPI_FAILURE(status)) | 
 | 		return -EIO; | 
 |  | 
 | 	obj = (union acpi_object *)output.pointer; | 
 | 	if (obj && obj->type == ACPI_TYPE_INTEGER) | 
 | 		tmp = (u32) obj->integer.value; | 
 |  | 
 | 	if (retval) | 
 | 		*retval = tmp; | 
 |  | 
 | 	kfree(obj); | 
 |  | 
 | 	if (tmp == ASUS_WMI_UNSUPPORTED_METHOD) | 
 | 		return -ENODEV; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | int asus_wmi_evaluate_method(u32 method_id, u32 arg0, u32 arg1, u32 *retval) | 
 | { | 
 | 	return asus_wmi_evaluate_method3(method_id, arg0, arg1, 0, retval); | 
 | } | 
 | EXPORT_SYMBOL_GPL(asus_wmi_evaluate_method); | 
 |  | 
 | static int asus_wmi_evaluate_method_agfn(const struct acpi_buffer args) | 
 | { | 
 | 	struct acpi_buffer input; | 
 | 	u64 phys_addr; | 
 | 	u32 retval; | 
 | 	u32 status = -1; | 
 |  | 
 | 	/* | 
 | 	 * Copy to dma capable address otherwise memory corruption occurs as | 
 | 	 * bios has to be able to access it. | 
 | 	 */ | 
 | 	input.pointer = kmemdup(args.pointer, args.length, GFP_DMA | GFP_KERNEL); | 
 | 	input.length = args.length; | 
 | 	if (!input.pointer) | 
 | 		return -ENOMEM; | 
 | 	phys_addr = virt_to_phys(input.pointer); | 
 |  | 
 | 	status = asus_wmi_evaluate_method(ASUS_WMI_METHODID_AGFN, | 
 | 					phys_addr, 0, &retval); | 
 | 	if (!status) | 
 | 		memcpy(args.pointer, input.pointer, args.length); | 
 |  | 
 | 	kfree(input.pointer); | 
 | 	if (status) | 
 | 		return -ENXIO; | 
 |  | 
 | 	return retval; | 
 | } | 
 |  | 
 | static int asus_wmi_get_devstate(struct asus_wmi *asus, u32 dev_id, u32 *retval) | 
 | { | 
 | 	return asus_wmi_evaluate_method(asus->dsts_id, dev_id, 0, retval); | 
 | } | 
 |  | 
 | static int asus_wmi_set_devstate(u32 dev_id, u32 ctrl_param, | 
 | 				 u32 *retval) | 
 | { | 
 | 	return asus_wmi_evaluate_method(ASUS_WMI_METHODID_DEVS, dev_id, | 
 | 					ctrl_param, retval); | 
 | } | 
 |  | 
 | /* Helper for special devices with magic return codes */ | 
 | static int asus_wmi_get_devstate_bits(struct asus_wmi *asus, | 
 | 				      u32 dev_id, u32 mask) | 
 | { | 
 | 	u32 retval = 0; | 
 | 	int err; | 
 |  | 
 | 	err = asus_wmi_get_devstate(asus, dev_id, &retval); | 
 | 	if (err < 0) | 
 | 		return err; | 
 |  | 
 | 	if (!(retval & ASUS_WMI_DSTS_PRESENCE_BIT)) | 
 | 		return -ENODEV; | 
 |  | 
 | 	if (mask == ASUS_WMI_DSTS_STATUS_BIT) { | 
 | 		if (retval & ASUS_WMI_DSTS_UNKNOWN_BIT) | 
 | 			return -ENODEV; | 
 | 	} | 
 |  | 
 | 	return retval & mask; | 
 | } | 
 |  | 
 | static int asus_wmi_get_devstate_simple(struct asus_wmi *asus, u32 dev_id) | 
 | { | 
 | 	return asus_wmi_get_devstate_bits(asus, dev_id, | 
 | 					  ASUS_WMI_DSTS_STATUS_BIT); | 
 | } | 
 |  | 
 | static bool asus_wmi_dev_is_present(struct asus_wmi *asus, u32 dev_id) | 
 | { | 
 | 	u32 retval; | 
 | 	int status = asus_wmi_get_devstate(asus, dev_id, &retval); | 
 |  | 
 | 	return status == 0 && (retval & ASUS_WMI_DSTS_PRESENCE_BIT); | 
 | } | 
 |  | 
 | /* Battery ********************************************************************/ | 
 |  | 
 | /* The battery maximum charging percentage */ | 
 | static int charge_end_threshold; | 
 |  | 
 | static ssize_t charge_control_end_threshold_store(struct device *dev, | 
 | 						  struct device_attribute *attr, | 
 | 						  const char *buf, size_t count) | 
 | { | 
 | 	int value, ret, rv; | 
 |  | 
 | 	ret = kstrtouint(buf, 10, &value); | 
 | 	if (ret) | 
 | 		return ret; | 
 |  | 
 | 	if (value < 0 || value > 100) | 
 | 		return -EINVAL; | 
 |  | 
 | 	ret = asus_wmi_set_devstate(ASUS_WMI_DEVID_RSOC, value, &rv); | 
 | 	if (ret) | 
 | 		return ret; | 
 |  | 
 | 	if (rv != 1) | 
 | 		return -EIO; | 
 |  | 
 | 	/* There isn't any method in the DSDT to read the threshold, so we | 
 | 	 * save the threshold. | 
 | 	 */ | 
 | 	charge_end_threshold = value; | 
 | 	return count; | 
 | } | 
 |  | 
 | static ssize_t charge_control_end_threshold_show(struct device *device, | 
 | 						 struct device_attribute *attr, | 
 | 						 char *buf) | 
 | { | 
 | 	return sprintf(buf, "%d\n", charge_end_threshold); | 
 | } | 
 |  | 
 | static DEVICE_ATTR_RW(charge_control_end_threshold); | 
 |  | 
 | static int asus_wmi_battery_add(struct power_supply *battery) | 
 | { | 
 | 	/* The WMI method does not provide a way to specific a battery, so we | 
 | 	 * just assume it is the first battery. | 
 | 	 */ | 
 | 	if (strcmp(battery->desc->name, "BAT0") != 0) | 
 | 		return -ENODEV; | 
 |  | 
 | 	if (device_create_file(&battery->dev, | 
 | 	    &dev_attr_charge_control_end_threshold)) | 
 | 		return -ENODEV; | 
 |  | 
 | 	/* The charge threshold is only reset when the system is power cycled, | 
 | 	 * and we can't get the current threshold so let set it to 100% when | 
 | 	 * a battery is added. | 
 | 	 */ | 
 | 	asus_wmi_set_devstate(ASUS_WMI_DEVID_RSOC, 100, NULL); | 
 | 	charge_end_threshold = 100; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int asus_wmi_battery_remove(struct power_supply *battery) | 
 | { | 
 | 	device_remove_file(&battery->dev, | 
 | 			   &dev_attr_charge_control_end_threshold); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static struct acpi_battery_hook battery_hook = { | 
 | 	.add_battery = asus_wmi_battery_add, | 
 | 	.remove_battery = asus_wmi_battery_remove, | 
 | 	.name = "ASUS Battery Extension", | 
 | }; | 
 |  | 
 | static void asus_wmi_battery_init(struct asus_wmi *asus) | 
 | { | 
 | 	asus->battery_rsoc_available = false; | 
 | 	if (asus_wmi_dev_is_present(asus, ASUS_WMI_DEVID_RSOC)) { | 
 | 		asus->battery_rsoc_available = true; | 
 | 		battery_hook_register(&battery_hook); | 
 | 	} | 
 | } | 
 |  | 
 | static void asus_wmi_battery_exit(struct asus_wmi *asus) | 
 | { | 
 | 	if (asus->battery_rsoc_available) | 
 | 		battery_hook_unregister(&battery_hook); | 
 | } | 
 |  | 
 | /* LEDs ***********************************************************************/ | 
 |  | 
 | /* | 
 |  * These functions actually update the LED's, and are called from a | 
 |  * workqueue. By doing this as separate work rather than when the LED | 
 |  * subsystem asks, we avoid messing with the Asus ACPI stuff during a | 
 |  * potentially bad time, such as a timer interrupt. | 
 |  */ | 
 | static void tpd_led_update(struct work_struct *work) | 
 | { | 
 | 	int ctrl_param; | 
 | 	struct asus_wmi *asus; | 
 |  | 
 | 	asus = container_of(work, struct asus_wmi, tpd_led_work); | 
 |  | 
 | 	ctrl_param = asus->tpd_led_wk; | 
 | 	asus_wmi_set_devstate(ASUS_WMI_DEVID_TOUCHPAD_LED, ctrl_param, NULL); | 
 | } | 
 |  | 
 | static void tpd_led_set(struct led_classdev *led_cdev, | 
 | 			enum led_brightness value) | 
 | { | 
 | 	struct asus_wmi *asus; | 
 |  | 
 | 	asus = container_of(led_cdev, struct asus_wmi, tpd_led); | 
 |  | 
 | 	asus->tpd_led_wk = !!value; | 
 | 	queue_work(asus->led_workqueue, &asus->tpd_led_work); | 
 | } | 
 |  | 
 | static int read_tpd_led_state(struct asus_wmi *asus) | 
 | { | 
 | 	return asus_wmi_get_devstate_simple(asus, ASUS_WMI_DEVID_TOUCHPAD_LED); | 
 | } | 
 |  | 
 | static enum led_brightness tpd_led_get(struct led_classdev *led_cdev) | 
 | { | 
 | 	struct asus_wmi *asus; | 
 |  | 
 | 	asus = container_of(led_cdev, struct asus_wmi, tpd_led); | 
 |  | 
 | 	return read_tpd_led_state(asus); | 
 | } | 
 |  | 
 | static void kbd_led_update(struct asus_wmi *asus) | 
 | { | 
 | 	int ctrl_param = 0; | 
 |  | 
 | 	/* | 
 | 	 * bits 0-2: level | 
 | 	 * bit 7: light on/off | 
 | 	 */ | 
 | 	if (asus->kbd_led_wk > 0) | 
 | 		ctrl_param = 0x80 | (asus->kbd_led_wk & 0x7F); | 
 |  | 
 | 	asus_wmi_set_devstate(ASUS_WMI_DEVID_KBD_BACKLIGHT, ctrl_param, NULL); | 
 | } | 
 |  | 
 | static int kbd_led_read(struct asus_wmi *asus, int *level, int *env) | 
 | { | 
 | 	int retval; | 
 |  | 
 | 	/* | 
 | 	 * bits 0-2: level | 
 | 	 * bit 7: light on/off | 
 | 	 * bit 8-10: environment (0: dark, 1: normal, 2: light) | 
 | 	 * bit 17: status unknown | 
 | 	 */ | 
 | 	retval = asus_wmi_get_devstate_bits(asus, ASUS_WMI_DEVID_KBD_BACKLIGHT, | 
 | 					    0xFFFF); | 
 |  | 
 | 	/* Unknown status is considered as off */ | 
 | 	if (retval == 0x8000) | 
 | 		retval = 0; | 
 |  | 
 | 	if (retval < 0) | 
 | 		return retval; | 
 |  | 
 | 	if (level) | 
 | 		*level = retval & 0x7F; | 
 | 	if (env) | 
 | 		*env = (retval >> 8) & 0x7F; | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void do_kbd_led_set(struct led_classdev *led_cdev, int value) | 
 | { | 
 | 	struct asus_wmi *asus; | 
 | 	int max_level; | 
 |  | 
 | 	asus = container_of(led_cdev, struct asus_wmi, kbd_led); | 
 | 	max_level = asus->kbd_led.max_brightness; | 
 |  | 
 | 	asus->kbd_led_wk = clamp_val(value, 0, max_level); | 
 | 	kbd_led_update(asus); | 
 | } | 
 |  | 
 | static void kbd_led_set(struct led_classdev *led_cdev, | 
 | 			enum led_brightness value) | 
 | { | 
 | 	/* Prevent disabling keyboard backlight on module unregister */ | 
 | 	if (led_cdev->flags & LED_UNREGISTERING) | 
 | 		return; | 
 |  | 
 | 	do_kbd_led_set(led_cdev, value); | 
 | } | 
 |  | 
 | static void kbd_led_set_by_kbd(struct asus_wmi *asus, enum led_brightness value) | 
 | { | 
 | 	struct led_classdev *led_cdev = &asus->kbd_led; | 
 |  | 
 | 	do_kbd_led_set(led_cdev, value); | 
 | 	led_classdev_notify_brightness_hw_changed(led_cdev, asus->kbd_led_wk); | 
 | } | 
 |  | 
 | static enum led_brightness kbd_led_get(struct led_classdev *led_cdev) | 
 | { | 
 | 	struct asus_wmi *asus; | 
 | 	int retval, value; | 
 |  | 
 | 	asus = container_of(led_cdev, struct asus_wmi, kbd_led); | 
 |  | 
 | 	retval = kbd_led_read(asus, &value, NULL); | 
 | 	if (retval < 0) | 
 | 		return retval; | 
 |  | 
 | 	return value; | 
 | } | 
 |  | 
 | static int wlan_led_unknown_state(struct asus_wmi *asus) | 
 | { | 
 | 	u32 result; | 
 |  | 
 | 	asus_wmi_get_devstate(asus, ASUS_WMI_DEVID_WIRELESS_LED, &result); | 
 |  | 
 | 	return result & ASUS_WMI_DSTS_UNKNOWN_BIT; | 
 | } | 
 |  | 
 | static void wlan_led_update(struct work_struct *work) | 
 | { | 
 | 	int ctrl_param; | 
 | 	struct asus_wmi *asus; | 
 |  | 
 | 	asus = container_of(work, struct asus_wmi, wlan_led_work); | 
 |  | 
 | 	ctrl_param = asus->wlan_led_wk; | 
 | 	asus_wmi_set_devstate(ASUS_WMI_DEVID_WIRELESS_LED, ctrl_param, NULL); | 
 | } | 
 |  | 
 | static void wlan_led_set(struct led_classdev *led_cdev, | 
 | 			 enum led_brightness value) | 
 | { | 
 | 	struct asus_wmi *asus; | 
 |  | 
 | 	asus = container_of(led_cdev, struct asus_wmi, wlan_led); | 
 |  | 
 | 	asus->wlan_led_wk = !!value; | 
 | 	queue_work(asus->led_workqueue, &asus->wlan_led_work); | 
 | } | 
 |  | 
 | static enum led_brightness wlan_led_get(struct led_classdev *led_cdev) | 
 | { | 
 | 	struct asus_wmi *asus; | 
 | 	u32 result; | 
 |  | 
 | 	asus = container_of(led_cdev, struct asus_wmi, wlan_led); | 
 | 	asus_wmi_get_devstate(asus, ASUS_WMI_DEVID_WIRELESS_LED, &result); | 
 |  | 
 | 	return result & ASUS_WMI_DSTS_BRIGHTNESS_MASK; | 
 | } | 
 |  | 
 | static void lightbar_led_update(struct work_struct *work) | 
 | { | 
 | 	struct asus_wmi *asus; | 
 | 	int ctrl_param; | 
 |  | 
 | 	asus = container_of(work, struct asus_wmi, lightbar_led_work); | 
 |  | 
 | 	ctrl_param = asus->lightbar_led_wk; | 
 | 	asus_wmi_set_devstate(ASUS_WMI_DEVID_LIGHTBAR, ctrl_param, NULL); | 
 | } | 
 |  | 
 | static void lightbar_led_set(struct led_classdev *led_cdev, | 
 | 			     enum led_brightness value) | 
 | { | 
 | 	struct asus_wmi *asus; | 
 |  | 
 | 	asus = container_of(led_cdev, struct asus_wmi, lightbar_led); | 
 |  | 
 | 	asus->lightbar_led_wk = !!value; | 
 | 	queue_work(asus->led_workqueue, &asus->lightbar_led_work); | 
 | } | 
 |  | 
 | static enum led_brightness lightbar_led_get(struct led_classdev *led_cdev) | 
 | { | 
 | 	struct asus_wmi *asus; | 
 | 	u32 result; | 
 |  | 
 | 	asus = container_of(led_cdev, struct asus_wmi, lightbar_led); | 
 | 	asus_wmi_get_devstate(asus, ASUS_WMI_DEVID_LIGHTBAR, &result); | 
 |  | 
 | 	return result & ASUS_WMI_DSTS_LIGHTBAR_MASK; | 
 | } | 
 |  | 
 | static void asus_wmi_led_exit(struct asus_wmi *asus) | 
 | { | 
 | 	if (!IS_ERR_OR_NULL(asus->kbd_led.dev)) | 
 | 		led_classdev_unregister(&asus->kbd_led); | 
 | 	if (!IS_ERR_OR_NULL(asus->tpd_led.dev)) | 
 | 		led_classdev_unregister(&asus->tpd_led); | 
 | 	if (!IS_ERR_OR_NULL(asus->wlan_led.dev)) | 
 | 		led_classdev_unregister(&asus->wlan_led); | 
 | 	if (!IS_ERR_OR_NULL(asus->lightbar_led.dev)) | 
 | 		led_classdev_unregister(&asus->lightbar_led); | 
 | 	if (asus->led_workqueue) | 
 | 		destroy_workqueue(asus->led_workqueue); | 
 | } | 
 |  | 
 | static int asus_wmi_led_init(struct asus_wmi *asus) | 
 | { | 
 | 	int rv = 0, led_val; | 
 |  | 
 | 	asus->led_workqueue = create_singlethread_workqueue("led_workqueue"); | 
 | 	if (!asus->led_workqueue) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	if (read_tpd_led_state(asus) >= 0) { | 
 | 		INIT_WORK(&asus->tpd_led_work, tpd_led_update); | 
 |  | 
 | 		asus->tpd_led.name = "asus::touchpad"; | 
 | 		asus->tpd_led.brightness_set = tpd_led_set; | 
 | 		asus->tpd_led.brightness_get = tpd_led_get; | 
 | 		asus->tpd_led.max_brightness = 1; | 
 |  | 
 | 		rv = led_classdev_register(&asus->platform_device->dev, | 
 | 					   &asus->tpd_led); | 
 | 		if (rv) | 
 | 			goto error; | 
 | 	} | 
 |  | 
 | 	if (!kbd_led_read(asus, &led_val, NULL)) { | 
 | 		asus->kbd_led_wk = led_val; | 
 | 		asus->kbd_led.name = "asus::kbd_backlight"; | 
 | 		asus->kbd_led.flags = LED_BRIGHT_HW_CHANGED; | 
 | 		asus->kbd_led.brightness_set = kbd_led_set; | 
 | 		asus->kbd_led.brightness_get = kbd_led_get; | 
 | 		asus->kbd_led.max_brightness = 3; | 
 |  | 
 | 		rv = led_classdev_register(&asus->platform_device->dev, | 
 | 					   &asus->kbd_led); | 
 | 		if (rv) | 
 | 			goto error; | 
 | 	} | 
 |  | 
 | 	if (asus_wmi_dev_is_present(asus, ASUS_WMI_DEVID_WIRELESS_LED) | 
 | 			&& (asus->driver->quirks->wapf > 0)) { | 
 | 		INIT_WORK(&asus->wlan_led_work, wlan_led_update); | 
 |  | 
 | 		asus->wlan_led.name = "asus::wlan"; | 
 | 		asus->wlan_led.brightness_set = wlan_led_set; | 
 | 		if (!wlan_led_unknown_state(asus)) | 
 | 			asus->wlan_led.brightness_get = wlan_led_get; | 
 | 		asus->wlan_led.flags = LED_CORE_SUSPENDRESUME; | 
 | 		asus->wlan_led.max_brightness = 1; | 
 | 		asus->wlan_led.default_trigger = "asus-wlan"; | 
 |  | 
 | 		rv = led_classdev_register(&asus->platform_device->dev, | 
 | 					   &asus->wlan_led); | 
 | 		if (rv) | 
 | 			goto error; | 
 | 	} | 
 |  | 
 | 	if (asus_wmi_dev_is_present(asus, ASUS_WMI_DEVID_LIGHTBAR)) { | 
 | 		INIT_WORK(&asus->lightbar_led_work, lightbar_led_update); | 
 |  | 
 | 		asus->lightbar_led.name = "asus::lightbar"; | 
 | 		asus->lightbar_led.brightness_set = lightbar_led_set; | 
 | 		asus->lightbar_led.brightness_get = lightbar_led_get; | 
 | 		asus->lightbar_led.max_brightness = 1; | 
 |  | 
 | 		rv = led_classdev_register(&asus->platform_device->dev, | 
 | 					   &asus->lightbar_led); | 
 | 	} | 
 |  | 
 | error: | 
 | 	if (rv) | 
 | 		asus_wmi_led_exit(asus); | 
 |  | 
 | 	return rv; | 
 | } | 
 |  | 
 | /* RF *************************************************************************/ | 
 |  | 
 | /* | 
 |  * PCI hotplug (for wlan rfkill) | 
 |  */ | 
 | static bool asus_wlan_rfkill_blocked(struct asus_wmi *asus) | 
 | { | 
 | 	int result = asus_wmi_get_devstate_simple(asus, ASUS_WMI_DEVID_WLAN); | 
 |  | 
 | 	if (result < 0) | 
 | 		return false; | 
 | 	return !result; | 
 | } | 
 |  | 
 | static void asus_rfkill_hotplug(struct asus_wmi *asus) | 
 | { | 
 | 	struct pci_dev *dev; | 
 | 	struct pci_bus *bus; | 
 | 	bool blocked; | 
 | 	bool absent; | 
 | 	u32 l; | 
 |  | 
 | 	mutex_lock(&asus->wmi_lock); | 
 | 	blocked = asus_wlan_rfkill_blocked(asus); | 
 | 	mutex_unlock(&asus->wmi_lock); | 
 |  | 
 | 	mutex_lock(&asus->hotplug_lock); | 
 | 	pci_lock_rescan_remove(); | 
 |  | 
 | 	if (asus->wlan.rfkill) | 
 | 		rfkill_set_sw_state(asus->wlan.rfkill, blocked); | 
 |  | 
 | 	if (asus->hotplug_slot.ops) { | 
 | 		bus = pci_find_bus(0, 1); | 
 | 		if (!bus) { | 
 | 			pr_warn("Unable to find PCI bus 1?\n"); | 
 | 			goto out_unlock; | 
 | 		} | 
 |  | 
 | 		if (pci_bus_read_config_dword(bus, 0, PCI_VENDOR_ID, &l)) { | 
 | 			pr_err("Unable to read PCI config space?\n"); | 
 | 			goto out_unlock; | 
 | 		} | 
 | 		absent = (l == 0xffffffff); | 
 |  | 
 | 		if (blocked != absent) { | 
 | 			pr_warn("BIOS says wireless lan is %s, " | 
 | 				"but the pci device is %s\n", | 
 | 				blocked ? "blocked" : "unblocked", | 
 | 				absent ? "absent" : "present"); | 
 | 			pr_warn("skipped wireless hotplug as probably " | 
 | 				"inappropriate for this model\n"); | 
 | 			goto out_unlock; | 
 | 		} | 
 |  | 
 | 		if (!blocked) { | 
 | 			dev = pci_get_slot(bus, 0); | 
 | 			if (dev) { | 
 | 				/* Device already present */ | 
 | 				pci_dev_put(dev); | 
 | 				goto out_unlock; | 
 | 			} | 
 | 			dev = pci_scan_single_device(bus, 0); | 
 | 			if (dev) { | 
 | 				pci_bus_assign_resources(bus); | 
 | 				pci_bus_add_device(dev); | 
 | 			} | 
 | 		} else { | 
 | 			dev = pci_get_slot(bus, 0); | 
 | 			if (dev) { | 
 | 				pci_stop_and_remove_bus_device(dev); | 
 | 				pci_dev_put(dev); | 
 | 			} | 
 | 		} | 
 | 	} | 
 |  | 
 | out_unlock: | 
 | 	pci_unlock_rescan_remove(); | 
 | 	mutex_unlock(&asus->hotplug_lock); | 
 | } | 
 |  | 
 | static void asus_rfkill_notify(acpi_handle handle, u32 event, void *data) | 
 | { | 
 | 	struct asus_wmi *asus = data; | 
 |  | 
 | 	if (event != ACPI_NOTIFY_BUS_CHECK) | 
 | 		return; | 
 |  | 
 | 	/* | 
 | 	 * We can't call directly asus_rfkill_hotplug because most | 
 | 	 * of the time WMBC is still being executed and not reetrant. | 
 | 	 * There is currently no way to tell ACPICA that  we want this | 
 | 	 * method to be serialized, we schedule a asus_rfkill_hotplug | 
 | 	 * call later, in a safer context. | 
 | 	 */ | 
 | 	queue_work(asus->hotplug_workqueue, &asus->hotplug_work); | 
 | } | 
 |  | 
 | static int asus_register_rfkill_notifier(struct asus_wmi *asus, char *node) | 
 | { | 
 | 	acpi_status status; | 
 | 	acpi_handle handle; | 
 |  | 
 | 	status = acpi_get_handle(NULL, node, &handle); | 
 | 	if (ACPI_FAILURE(status)) | 
 | 		return -ENODEV; | 
 |  | 
 | 	status = acpi_install_notify_handler(handle, ACPI_SYSTEM_NOTIFY, | 
 | 					     asus_rfkill_notify, asus); | 
 | 	if (ACPI_FAILURE(status)) | 
 | 		pr_warn("Failed to register notify on %s\n", node); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void asus_unregister_rfkill_notifier(struct asus_wmi *asus, char *node) | 
 | { | 
 | 	acpi_status status = AE_OK; | 
 | 	acpi_handle handle; | 
 |  | 
 | 	status = acpi_get_handle(NULL, node, &handle); | 
 | 	if (ACPI_FAILURE(status)) | 
 | 		return; | 
 |  | 
 | 	status = acpi_remove_notify_handler(handle, ACPI_SYSTEM_NOTIFY, | 
 | 					    asus_rfkill_notify); | 
 | 	if (ACPI_FAILURE(status)) | 
 | 		pr_err("Error removing rfkill notify handler %s\n", node); | 
 | } | 
 |  | 
 | static int asus_get_adapter_status(struct hotplug_slot *hotplug_slot, | 
 | 				   u8 *value) | 
 | { | 
 | 	struct asus_wmi *asus = container_of(hotplug_slot, | 
 | 					     struct asus_wmi, hotplug_slot); | 
 | 	int result = asus_wmi_get_devstate_simple(asus, ASUS_WMI_DEVID_WLAN); | 
 |  | 
 | 	if (result < 0) | 
 | 		return result; | 
 |  | 
 | 	*value = !!result; | 
 | 	return 0; | 
 | } | 
 |  | 
 | static const struct hotplug_slot_ops asus_hotplug_slot_ops = { | 
 | 	.get_adapter_status = asus_get_adapter_status, | 
 | 	.get_power_status = asus_get_adapter_status, | 
 | }; | 
 |  | 
 | static void asus_hotplug_work(struct work_struct *work) | 
 | { | 
 | 	struct asus_wmi *asus; | 
 |  | 
 | 	asus = container_of(work, struct asus_wmi, hotplug_work); | 
 | 	asus_rfkill_hotplug(asus); | 
 | } | 
 |  | 
 | static int asus_setup_pci_hotplug(struct asus_wmi *asus) | 
 | { | 
 | 	int ret = -ENOMEM; | 
 | 	struct pci_bus *bus = pci_find_bus(0, 1); | 
 |  | 
 | 	if (!bus) { | 
 | 		pr_err("Unable to find wifi PCI bus\n"); | 
 | 		return -ENODEV; | 
 | 	} | 
 |  | 
 | 	asus->hotplug_workqueue = | 
 | 	    create_singlethread_workqueue("hotplug_workqueue"); | 
 | 	if (!asus->hotplug_workqueue) | 
 | 		goto error_workqueue; | 
 |  | 
 | 	INIT_WORK(&asus->hotplug_work, asus_hotplug_work); | 
 |  | 
 | 	asus->hotplug_slot.ops = &asus_hotplug_slot_ops; | 
 |  | 
 | 	ret = pci_hp_register(&asus->hotplug_slot, bus, 0, "asus-wifi"); | 
 | 	if (ret) { | 
 | 		pr_err("Unable to register hotplug slot - %d\n", ret); | 
 | 		goto error_register; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 |  | 
 | error_register: | 
 | 	asus->hotplug_slot.ops = NULL; | 
 | 	destroy_workqueue(asus->hotplug_workqueue); | 
 | error_workqueue: | 
 | 	return ret; | 
 | } | 
 |  | 
 | /* | 
 |  * Rfkill devices | 
 |  */ | 
 | static int asus_rfkill_set(void *data, bool blocked) | 
 | { | 
 | 	struct asus_rfkill *priv = data; | 
 | 	u32 ctrl_param = !blocked; | 
 | 	u32 dev_id = priv->dev_id; | 
 |  | 
 | 	/* | 
 | 	 * If the user bit is set, BIOS can't set and record the wlan status, | 
 | 	 * it will report the value read from id ASUS_WMI_DEVID_WLAN_LED | 
 | 	 * while we query the wlan status through WMI(ASUS_WMI_DEVID_WLAN). | 
 | 	 * So, we have to record wlan status in id ASUS_WMI_DEVID_WLAN_LED | 
 | 	 * while setting the wlan status through WMI. | 
 | 	 * This is also the behavior that windows app will do. | 
 | 	 */ | 
 | 	if ((dev_id == ASUS_WMI_DEVID_WLAN) && | 
 | 	     priv->asus->driver->wlan_ctrl_by_user) | 
 | 		dev_id = ASUS_WMI_DEVID_WLAN_LED; | 
 |  | 
 | 	return asus_wmi_set_devstate(dev_id, ctrl_param, NULL); | 
 | } | 
 |  | 
 | static void asus_rfkill_query(struct rfkill *rfkill, void *data) | 
 | { | 
 | 	struct asus_rfkill *priv = data; | 
 | 	int result; | 
 |  | 
 | 	result = asus_wmi_get_devstate_simple(priv->asus, priv->dev_id); | 
 |  | 
 | 	if (result < 0) | 
 | 		return; | 
 |  | 
 | 	rfkill_set_sw_state(priv->rfkill, !result); | 
 | } | 
 |  | 
 | static int asus_rfkill_wlan_set(void *data, bool blocked) | 
 | { | 
 | 	struct asus_rfkill *priv = data; | 
 | 	struct asus_wmi *asus = priv->asus; | 
 | 	int ret; | 
 |  | 
 | 	/* | 
 | 	 * This handler is enabled only if hotplug is enabled. | 
 | 	 * In this case, the asus_wmi_set_devstate() will | 
 | 	 * trigger a wmi notification and we need to wait | 
 | 	 * this call to finish before being able to call | 
 | 	 * any wmi method | 
 | 	 */ | 
 | 	mutex_lock(&asus->wmi_lock); | 
 | 	ret = asus_rfkill_set(data, blocked); | 
 | 	mutex_unlock(&asus->wmi_lock); | 
 | 	return ret; | 
 | } | 
 |  | 
 | static const struct rfkill_ops asus_rfkill_wlan_ops = { | 
 | 	.set_block = asus_rfkill_wlan_set, | 
 | 	.query = asus_rfkill_query, | 
 | }; | 
 |  | 
 | static const struct rfkill_ops asus_rfkill_ops = { | 
 | 	.set_block = asus_rfkill_set, | 
 | 	.query = asus_rfkill_query, | 
 | }; | 
 |  | 
 | static int asus_new_rfkill(struct asus_wmi *asus, | 
 | 			   struct asus_rfkill *arfkill, | 
 | 			   const char *name, enum rfkill_type type, int dev_id) | 
 | { | 
 | 	int result = asus_wmi_get_devstate_simple(asus, dev_id); | 
 | 	struct rfkill **rfkill = &arfkill->rfkill; | 
 |  | 
 | 	if (result < 0) | 
 | 		return result; | 
 |  | 
 | 	arfkill->dev_id = dev_id; | 
 | 	arfkill->asus = asus; | 
 |  | 
 | 	if (dev_id == ASUS_WMI_DEVID_WLAN && | 
 | 	    asus->driver->quirks->hotplug_wireless) | 
 | 		*rfkill = rfkill_alloc(name, &asus->platform_device->dev, type, | 
 | 				       &asus_rfkill_wlan_ops, arfkill); | 
 | 	else | 
 | 		*rfkill = rfkill_alloc(name, &asus->platform_device->dev, type, | 
 | 				       &asus_rfkill_ops, arfkill); | 
 |  | 
 | 	if (!*rfkill) | 
 | 		return -EINVAL; | 
 |  | 
 | 	if ((dev_id == ASUS_WMI_DEVID_WLAN) && | 
 | 			(asus->driver->quirks->wapf > 0)) | 
 | 		rfkill_set_led_trigger_name(*rfkill, "asus-wlan"); | 
 |  | 
 | 	rfkill_init_sw_state(*rfkill, !result); | 
 | 	result = rfkill_register(*rfkill); | 
 | 	if (result) { | 
 | 		rfkill_destroy(*rfkill); | 
 | 		*rfkill = NULL; | 
 | 		return result; | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void asus_wmi_rfkill_exit(struct asus_wmi *asus) | 
 | { | 
 | 	if (asus->driver->wlan_ctrl_by_user && ashs_present()) | 
 | 		return; | 
 |  | 
 | 	asus_unregister_rfkill_notifier(asus, "\\_SB.PCI0.P0P5"); | 
 | 	asus_unregister_rfkill_notifier(asus, "\\_SB.PCI0.P0P6"); | 
 | 	asus_unregister_rfkill_notifier(asus, "\\_SB.PCI0.P0P7"); | 
 | 	if (asus->wlan.rfkill) { | 
 | 		rfkill_unregister(asus->wlan.rfkill); | 
 | 		rfkill_destroy(asus->wlan.rfkill); | 
 | 		asus->wlan.rfkill = NULL; | 
 | 	} | 
 | 	/* | 
 | 	 * Refresh pci hotplug in case the rfkill state was changed after | 
 | 	 * asus_unregister_rfkill_notifier() | 
 | 	 */ | 
 | 	asus_rfkill_hotplug(asus); | 
 | 	if (asus->hotplug_slot.ops) | 
 | 		pci_hp_deregister(&asus->hotplug_slot); | 
 | 	if (asus->hotplug_workqueue) | 
 | 		destroy_workqueue(asus->hotplug_workqueue); | 
 |  | 
 | 	if (asus->bluetooth.rfkill) { | 
 | 		rfkill_unregister(asus->bluetooth.rfkill); | 
 | 		rfkill_destroy(asus->bluetooth.rfkill); | 
 | 		asus->bluetooth.rfkill = NULL; | 
 | 	} | 
 | 	if (asus->wimax.rfkill) { | 
 | 		rfkill_unregister(asus->wimax.rfkill); | 
 | 		rfkill_destroy(asus->wimax.rfkill); | 
 | 		asus->wimax.rfkill = NULL; | 
 | 	} | 
 | 	if (asus->wwan3g.rfkill) { | 
 | 		rfkill_unregister(asus->wwan3g.rfkill); | 
 | 		rfkill_destroy(asus->wwan3g.rfkill); | 
 | 		asus->wwan3g.rfkill = NULL; | 
 | 	} | 
 | 	if (asus->gps.rfkill) { | 
 | 		rfkill_unregister(asus->gps.rfkill); | 
 | 		rfkill_destroy(asus->gps.rfkill); | 
 | 		asus->gps.rfkill = NULL; | 
 | 	} | 
 | 	if (asus->uwb.rfkill) { | 
 | 		rfkill_unregister(asus->uwb.rfkill); | 
 | 		rfkill_destroy(asus->uwb.rfkill); | 
 | 		asus->uwb.rfkill = NULL; | 
 | 	} | 
 | } | 
 |  | 
 | static int asus_wmi_rfkill_init(struct asus_wmi *asus) | 
 | { | 
 | 	int result = 0; | 
 |  | 
 | 	mutex_init(&asus->hotplug_lock); | 
 | 	mutex_init(&asus->wmi_lock); | 
 |  | 
 | 	result = asus_new_rfkill(asus, &asus->wlan, "asus-wlan", | 
 | 				 RFKILL_TYPE_WLAN, ASUS_WMI_DEVID_WLAN); | 
 |  | 
 | 	if (result && result != -ENODEV) | 
 | 		goto exit; | 
 |  | 
 | 	result = asus_new_rfkill(asus, &asus->bluetooth, | 
 | 				 "asus-bluetooth", RFKILL_TYPE_BLUETOOTH, | 
 | 				 ASUS_WMI_DEVID_BLUETOOTH); | 
 |  | 
 | 	if (result && result != -ENODEV) | 
 | 		goto exit; | 
 |  | 
 | 	result = asus_new_rfkill(asus, &asus->wimax, "asus-wimax", | 
 | 				 RFKILL_TYPE_WIMAX, ASUS_WMI_DEVID_WIMAX); | 
 |  | 
 | 	if (result && result != -ENODEV) | 
 | 		goto exit; | 
 |  | 
 | 	result = asus_new_rfkill(asus, &asus->wwan3g, "asus-wwan3g", | 
 | 				 RFKILL_TYPE_WWAN, ASUS_WMI_DEVID_WWAN3G); | 
 |  | 
 | 	if (result && result != -ENODEV) | 
 | 		goto exit; | 
 |  | 
 | 	result = asus_new_rfkill(asus, &asus->gps, "asus-gps", | 
 | 				 RFKILL_TYPE_GPS, ASUS_WMI_DEVID_GPS); | 
 |  | 
 | 	if (result && result != -ENODEV) | 
 | 		goto exit; | 
 |  | 
 | 	result = asus_new_rfkill(asus, &asus->uwb, "asus-uwb", | 
 | 				 RFKILL_TYPE_UWB, ASUS_WMI_DEVID_UWB); | 
 |  | 
 | 	if (result && result != -ENODEV) | 
 | 		goto exit; | 
 |  | 
 | 	if (!asus->driver->quirks->hotplug_wireless) | 
 | 		goto exit; | 
 |  | 
 | 	result = asus_setup_pci_hotplug(asus); | 
 | 	/* | 
 | 	 * If we get -EBUSY then something else is handling the PCI hotplug - | 
 | 	 * don't fail in this case | 
 | 	 */ | 
 | 	if (result == -EBUSY) | 
 | 		result = 0; | 
 |  | 
 | 	asus_register_rfkill_notifier(asus, "\\_SB.PCI0.P0P5"); | 
 | 	asus_register_rfkill_notifier(asus, "\\_SB.PCI0.P0P6"); | 
 | 	asus_register_rfkill_notifier(asus, "\\_SB.PCI0.P0P7"); | 
 | 	/* | 
 | 	 * Refresh pci hotplug in case the rfkill state was changed during | 
 | 	 * setup. | 
 | 	 */ | 
 | 	asus_rfkill_hotplug(asus); | 
 |  | 
 | exit: | 
 | 	if (result && result != -ENODEV) | 
 | 		asus_wmi_rfkill_exit(asus); | 
 |  | 
 | 	if (result == -ENODEV) | 
 | 		result = 0; | 
 |  | 
 | 	return result; | 
 | } | 
 |  | 
 | /* Quirks *********************************************************************/ | 
 |  | 
 | static void asus_wmi_set_xusb2pr(struct asus_wmi *asus) | 
 | { | 
 | 	struct pci_dev *xhci_pdev; | 
 | 	u32 orig_ports_available; | 
 | 	u32 ports_available = asus->driver->quirks->xusb2pr; | 
 |  | 
 | 	xhci_pdev = pci_get_device(PCI_VENDOR_ID_INTEL, | 
 | 			PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_XHCI, | 
 | 			NULL); | 
 |  | 
 | 	if (!xhci_pdev) | 
 | 		return; | 
 |  | 
 | 	pci_read_config_dword(xhci_pdev, USB_INTEL_XUSB2PR, | 
 | 				&orig_ports_available); | 
 |  | 
 | 	pci_write_config_dword(xhci_pdev, USB_INTEL_XUSB2PR, | 
 | 				cpu_to_le32(ports_available)); | 
 |  | 
 | 	pr_info("set USB_INTEL_XUSB2PR old: 0x%04x, new: 0x%04x\n", | 
 | 			orig_ports_available, ports_available); | 
 | } | 
 |  | 
 | /* | 
 |  * Some devices dont support or have borcken get_als method | 
 |  * but still support set method. | 
 |  */ | 
 | static void asus_wmi_set_als(void) | 
 | { | 
 | 	asus_wmi_set_devstate(ASUS_WMI_DEVID_ALS_ENABLE, 1, NULL); | 
 | } | 
 |  | 
 | /* Hwmon device ***************************************************************/ | 
 |  | 
 | static int asus_agfn_fan_speed_read(struct asus_wmi *asus, int fan, | 
 | 					  int *speed) | 
 | { | 
 | 	struct agfn_fan_args args = { | 
 | 		.agfn.len = sizeof(args), | 
 | 		.agfn.mfun = ASUS_FAN_MFUN, | 
 | 		.agfn.sfun = ASUS_FAN_SFUN_READ, | 
 | 		.fan = fan, | 
 | 		.speed = 0, | 
 | 	}; | 
 | 	struct acpi_buffer input = { (acpi_size) sizeof(args), &args }; | 
 | 	int status; | 
 |  | 
 | 	if (fan != 1) | 
 | 		return -EINVAL; | 
 |  | 
 | 	status = asus_wmi_evaluate_method_agfn(input); | 
 |  | 
 | 	if (status || args.agfn.err) | 
 | 		return -ENXIO; | 
 |  | 
 | 	if (speed) | 
 | 		*speed = args.speed; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int asus_agfn_fan_speed_write(struct asus_wmi *asus, int fan, | 
 | 				     int *speed) | 
 | { | 
 | 	struct agfn_fan_args args = { | 
 | 		.agfn.len = sizeof(args), | 
 | 		.agfn.mfun = ASUS_FAN_MFUN, | 
 | 		.agfn.sfun = ASUS_FAN_SFUN_WRITE, | 
 | 		.fan = fan, | 
 | 		.speed = speed ?  *speed : 0, | 
 | 	}; | 
 | 	struct acpi_buffer input = { (acpi_size) sizeof(args), &args }; | 
 | 	int status; | 
 |  | 
 | 	/* 1: for setting 1st fan's speed 0: setting auto mode */ | 
 | 	if (fan != 1 && fan != 0) | 
 | 		return -EINVAL; | 
 |  | 
 | 	status = asus_wmi_evaluate_method_agfn(input); | 
 |  | 
 | 	if (status || args.agfn.err) | 
 | 		return -ENXIO; | 
 |  | 
 | 	if (speed && fan == 1) | 
 | 		asus->agfn_pwm = *speed; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* | 
 |  * Check if we can read the speed of one fan. If true we assume we can also | 
 |  * control it. | 
 |  */ | 
 | static bool asus_wmi_has_agfn_fan(struct asus_wmi *asus) | 
 | { | 
 | 	int status; | 
 | 	int speed; | 
 | 	u32 value; | 
 |  | 
 | 	status = asus_agfn_fan_speed_read(asus, 1, &speed); | 
 | 	if (status != 0) | 
 | 		return false; | 
 |  | 
 | 	status = asus_wmi_get_devstate(asus, ASUS_WMI_DEVID_FAN_CTRL, &value); | 
 | 	if (status != 0) | 
 | 		return false; | 
 |  | 
 | 	/* | 
 | 	 * We need to find a better way, probably using sfun, | 
 | 	 * bits or spec ... | 
 | 	 * Currently we disable it if: | 
 | 	 * - ASUS_WMI_UNSUPPORTED_METHOD is returned | 
 | 	 * - reverved bits are non-zero | 
 | 	 * - sfun and presence bit are not set | 
 | 	 */ | 
 | 	return !(value == ASUS_WMI_UNSUPPORTED_METHOD || value & 0xFFF80000 | 
 | 		 || (!asus->sfun && !(value & ASUS_WMI_DSTS_PRESENCE_BIT))); | 
 | } | 
 |  | 
 | static int asus_fan_set_auto(struct asus_wmi *asus) | 
 | { | 
 | 	int status; | 
 | 	u32 retval; | 
 |  | 
 | 	switch (asus->fan_type) { | 
 | 	case FAN_TYPE_SPEC83: | 
 | 		status = asus_wmi_set_devstate(ASUS_WMI_DEVID_CPU_FAN_CTRL, | 
 | 					       0, &retval); | 
 | 		if (status) | 
 | 			return status; | 
 |  | 
 | 		if (retval != 1) | 
 | 			return -EIO; | 
 | 		break; | 
 |  | 
 | 	case FAN_TYPE_AGFN: | 
 | 		status = asus_agfn_fan_speed_write(asus, 0, NULL); | 
 | 		if (status) | 
 | 			return -ENXIO; | 
 | 		break; | 
 |  | 
 | 	default: | 
 | 		return -ENXIO; | 
 | 	} | 
 |  | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static ssize_t pwm1_show(struct device *dev, | 
 | 			       struct device_attribute *attr, | 
 | 			       char *buf) | 
 | { | 
 | 	struct asus_wmi *asus = dev_get_drvdata(dev); | 
 | 	int err; | 
 | 	int value; | 
 |  | 
 | 	/* If we already set a value then just return it */ | 
 | 	if (asus->agfn_pwm >= 0) | 
 | 		return sprintf(buf, "%d\n", asus->agfn_pwm); | 
 |  | 
 | 	/* | 
 | 	 * If we haven't set already set a value through the AGFN interface, | 
 | 	 * we read a current value through the (now-deprecated) FAN_CTRL device. | 
 | 	 */ | 
 | 	err = asus_wmi_get_devstate(asus, ASUS_WMI_DEVID_FAN_CTRL, &value); | 
 | 	if (err < 0) | 
 | 		return err; | 
 |  | 
 | 	value &= 0xFF; | 
 |  | 
 | 	if (value == 1) /* Low Speed */ | 
 | 		value = 85; | 
 | 	else if (value == 2) | 
 | 		value = 170; | 
 | 	else if (value == 3) | 
 | 		value = 255; | 
 | 	else if (value) { | 
 | 		pr_err("Unknown fan speed %#x\n", value); | 
 | 		value = -1; | 
 | 	} | 
 |  | 
 | 	return sprintf(buf, "%d\n", value); | 
 | } | 
 |  | 
 | static ssize_t pwm1_store(struct device *dev, | 
 | 				     struct device_attribute *attr, | 
 | 				     const char *buf, size_t count) { | 
 | 	struct asus_wmi *asus = dev_get_drvdata(dev); | 
 | 	int value; | 
 | 	int state; | 
 | 	int ret; | 
 |  | 
 | 	ret = kstrtouint(buf, 10, &value); | 
 | 	if (ret) | 
 | 		return ret; | 
 |  | 
 | 	value = clamp(value, 0, 255); | 
 |  | 
 | 	state = asus_agfn_fan_speed_write(asus, 1, &value); | 
 | 	if (state) | 
 | 		pr_warn("Setting fan speed failed: %d\n", state); | 
 | 	else | 
 | 		asus->fan_pwm_mode = ASUS_FAN_CTRL_MANUAL; | 
 |  | 
 | 	return count; | 
 | } | 
 |  | 
 | static ssize_t fan1_input_show(struct device *dev, | 
 | 					struct device_attribute *attr, | 
 | 					char *buf) | 
 | { | 
 | 	struct asus_wmi *asus = dev_get_drvdata(dev); | 
 | 	int value; | 
 | 	int ret; | 
 |  | 
 | 	switch (asus->fan_type) { | 
 | 	case FAN_TYPE_SPEC83: | 
 | 		ret = asus_wmi_get_devstate(asus, ASUS_WMI_DEVID_CPU_FAN_CTRL, | 
 | 					    &value); | 
 | 		if (ret < 0) | 
 | 			return ret; | 
 |  | 
 | 		value &= 0xffff; | 
 | 		break; | 
 |  | 
 | 	case FAN_TYPE_AGFN: | 
 | 		/* no speed readable on manual mode */ | 
 | 		if (asus->fan_pwm_mode == ASUS_FAN_CTRL_MANUAL) | 
 | 			return -ENXIO; | 
 |  | 
 | 		ret = asus_agfn_fan_speed_read(asus, 1, &value); | 
 | 		if (ret) { | 
 | 			pr_warn("reading fan speed failed: %d\n", ret); | 
 | 			return -ENXIO; | 
 | 		} | 
 | 		break; | 
 |  | 
 | 	default: | 
 | 		return -ENXIO; | 
 | 	} | 
 |  | 
 | 	return sprintf(buf, "%d\n", value < 0 ? -1 : value*100); | 
 | } | 
 |  | 
 | static ssize_t pwm1_enable_show(struct device *dev, | 
 | 						 struct device_attribute *attr, | 
 | 						 char *buf) | 
 | { | 
 | 	struct asus_wmi *asus = dev_get_drvdata(dev); | 
 |  | 
 | 	/* | 
 | 	 * Just read back the cached pwm mode. | 
 | 	 * | 
 | 	 * For the CPU_FAN device, the spec indicates that we should be | 
 | 	 * able to read the device status and consult bit 19 to see if we | 
 | 	 * are in Full On or Automatic mode. However, this does not work | 
 | 	 * in practice on X532FL at least (the bit is always 0) and there's | 
 | 	 * also nothing in the DSDT to indicate that this behaviour exists. | 
 | 	 */ | 
 | 	return sprintf(buf, "%d\n", asus->fan_pwm_mode); | 
 | } | 
 |  | 
 | static ssize_t pwm1_enable_store(struct device *dev, | 
 | 						  struct device_attribute *attr, | 
 | 						  const char *buf, size_t count) | 
 | { | 
 | 	struct asus_wmi *asus = dev_get_drvdata(dev); | 
 | 	int status = 0; | 
 | 	int state; | 
 | 	int value; | 
 | 	int ret; | 
 | 	u32 retval; | 
 |  | 
 | 	ret = kstrtouint(buf, 10, &state); | 
 | 	if (ret) | 
 | 		return ret; | 
 |  | 
 | 	if (asus->fan_type == FAN_TYPE_SPEC83) { | 
 | 		switch (state) { /* standard documented hwmon values */ | 
 | 		case ASUS_FAN_CTRL_FULLSPEED: | 
 | 			value = 1; | 
 | 			break; | 
 | 		case ASUS_FAN_CTRL_AUTO: | 
 | 			value = 0; | 
 | 			break; | 
 | 		default: | 
 | 			return -EINVAL; | 
 | 		} | 
 |  | 
 | 		ret = asus_wmi_set_devstate(ASUS_WMI_DEVID_CPU_FAN_CTRL, | 
 | 					    value, &retval); | 
 | 		if (ret) | 
 | 			return ret; | 
 |  | 
 | 		if (retval != 1) | 
 | 			return -EIO; | 
 | 	} else if (asus->fan_type == FAN_TYPE_AGFN) { | 
 | 		switch (state) { | 
 | 		case ASUS_FAN_CTRL_MANUAL: | 
 | 			break; | 
 |  | 
 | 		case ASUS_FAN_CTRL_AUTO: | 
 | 			status = asus_fan_set_auto(asus); | 
 | 			if (status) | 
 | 				return status; | 
 | 			break; | 
 |  | 
 | 		default: | 
 | 			return -EINVAL; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	asus->fan_pwm_mode = state; | 
 | 	return count; | 
 | } | 
 |  | 
 | static ssize_t fan1_label_show(struct device *dev, | 
 | 					  struct device_attribute *attr, | 
 | 					  char *buf) | 
 | { | 
 | 	return sprintf(buf, "%s\n", ASUS_FAN_DESC); | 
 | } | 
 |  | 
 | static ssize_t asus_hwmon_temp1(struct device *dev, | 
 | 				struct device_attribute *attr, | 
 | 				char *buf) | 
 | { | 
 | 	struct asus_wmi *asus = dev_get_drvdata(dev); | 
 | 	u32 value; | 
 | 	int err; | 
 |  | 
 | 	err = asus_wmi_get_devstate(asus, ASUS_WMI_DEVID_THERMAL_CTRL, &value); | 
 | 	if (err < 0) | 
 | 		return err; | 
 |  | 
 | 	value = DECI_KELVIN_TO_CELSIUS((value & 0xFFFF)) * 1000; | 
 |  | 
 | 	return sprintf(buf, "%d\n", value); | 
 | } | 
 |  | 
 | /* Fan1 */ | 
 | static DEVICE_ATTR_RW(pwm1); | 
 | static DEVICE_ATTR_RW(pwm1_enable); | 
 | static DEVICE_ATTR_RO(fan1_input); | 
 | static DEVICE_ATTR_RO(fan1_label); | 
 |  | 
 | /* Temperature */ | 
 | static DEVICE_ATTR(temp1_input, S_IRUGO, asus_hwmon_temp1, NULL); | 
 |  | 
 | static struct attribute *hwmon_attributes[] = { | 
 | 	&dev_attr_pwm1.attr, | 
 | 	&dev_attr_pwm1_enable.attr, | 
 | 	&dev_attr_fan1_input.attr, | 
 | 	&dev_attr_fan1_label.attr, | 
 |  | 
 | 	&dev_attr_temp1_input.attr, | 
 | 	NULL | 
 | }; | 
 |  | 
 | static umode_t asus_hwmon_sysfs_is_visible(struct kobject *kobj, | 
 | 					  struct attribute *attr, int idx) | 
 | { | 
 | 	struct device *dev = container_of(kobj, struct device, kobj); | 
 | 	struct asus_wmi *asus = dev_get_drvdata(dev->parent); | 
 | 	u32 value = ASUS_WMI_UNSUPPORTED_METHOD; | 
 |  | 
 | 	if (attr == &dev_attr_pwm1.attr) { | 
 | 		if (asus->fan_type != FAN_TYPE_AGFN) | 
 | 			return 0; | 
 | 	} else if (attr == &dev_attr_fan1_input.attr | 
 | 	    || attr == &dev_attr_fan1_label.attr | 
 | 	    || attr == &dev_attr_pwm1_enable.attr) { | 
 | 		if (asus->fan_type == FAN_TYPE_NONE) | 
 | 			return 0; | 
 | 	} else if (attr == &dev_attr_temp1_input.attr) { | 
 | 		int err = asus_wmi_get_devstate(asus, | 
 | 						ASUS_WMI_DEVID_THERMAL_CTRL, | 
 | 						&value); | 
 |  | 
 | 		if (err < 0) | 
 | 			return 0; /* can't return negative here */ | 
 |  | 
 | 		/* | 
 | 		 * If the temperature value in deci-Kelvin is near the absolute | 
 | 		 * zero temperature, something is clearly wrong | 
 | 		 */ | 
 | 		if (value == 0 || value == 1) | 
 | 			return 0; | 
 | 	} | 
 |  | 
 | 	return attr->mode; | 
 | } | 
 |  | 
 | static const struct attribute_group hwmon_attribute_group = { | 
 | 	.is_visible = asus_hwmon_sysfs_is_visible, | 
 | 	.attrs = hwmon_attributes | 
 | }; | 
 | __ATTRIBUTE_GROUPS(hwmon_attribute); | 
 |  | 
 | static int asus_wmi_hwmon_init(struct asus_wmi *asus) | 
 | { | 
 | 	struct device *dev = &asus->platform_device->dev; | 
 | 	struct device *hwmon; | 
 |  | 
 | 	hwmon = devm_hwmon_device_register_with_groups(dev, "asus", asus, | 
 | 			hwmon_attribute_groups); | 
 |  | 
 | 	if (IS_ERR(hwmon)) { | 
 | 		pr_err("Could not register asus hwmon device\n"); | 
 | 		return PTR_ERR(hwmon); | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int asus_wmi_fan_init(struct asus_wmi *asus) | 
 | { | 
 | 	asus->fan_type = FAN_TYPE_NONE; | 
 | 	asus->agfn_pwm = -1; | 
 |  | 
 | 	if (asus_wmi_dev_is_present(asus, ASUS_WMI_DEVID_CPU_FAN_CTRL)) | 
 | 		asus->fan_type = FAN_TYPE_SPEC83; | 
 | 	else if (asus_wmi_has_agfn_fan(asus)) | 
 | 		asus->fan_type = FAN_TYPE_AGFN; | 
 |  | 
 | 	if (asus->fan_type == FAN_TYPE_NONE) | 
 | 		return -ENODEV; | 
 |  | 
 | 	asus_fan_set_auto(asus); | 
 | 	asus->fan_pwm_mode = ASUS_FAN_CTRL_AUTO; | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* Fan mode *******************************************************************/ | 
 |  | 
 | static int fan_boost_mode_check_present(struct asus_wmi *asus) | 
 | { | 
 | 	u32 result; | 
 | 	int err; | 
 |  | 
 | 	asus->fan_boost_mode_available = false; | 
 |  | 
 | 	err = asus_wmi_get_devstate(asus, ASUS_WMI_DEVID_FAN_BOOST_MODE, | 
 | 				    &result); | 
 | 	if (err) { | 
 | 		if (err == -ENODEV) | 
 | 			return 0; | 
 | 		else | 
 | 			return err; | 
 | 	} | 
 |  | 
 | 	if ((result & ASUS_WMI_DSTS_PRESENCE_BIT) && | 
 | 			(result & ASUS_FAN_BOOST_MODES_MASK)) { | 
 | 		asus->fan_boost_mode_available = true; | 
 | 		asus->fan_boost_mode_mask = result & ASUS_FAN_BOOST_MODES_MASK; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int fan_boost_mode_write(struct asus_wmi *asus) | 
 | { | 
 | 	int err; | 
 | 	u8 value; | 
 | 	u32 retval; | 
 |  | 
 | 	value = asus->fan_boost_mode; | 
 |  | 
 | 	pr_info("Set fan boost mode: %u\n", value); | 
 | 	err = asus_wmi_set_devstate(ASUS_WMI_DEVID_FAN_BOOST_MODE, value, | 
 | 				    &retval); | 
 | 	if (err) { | 
 | 		pr_warn("Failed to set fan boost mode: %d\n", err); | 
 | 		return err; | 
 | 	} | 
 |  | 
 | 	if (retval != 1) { | 
 | 		pr_warn("Failed to set fan boost mode (retval): 0x%x\n", | 
 | 			retval); | 
 | 		return -EIO; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int fan_boost_mode_switch_next(struct asus_wmi *asus) | 
 | { | 
 | 	u8 mask = asus->fan_boost_mode_mask; | 
 |  | 
 | 	if (asus->fan_boost_mode == ASUS_FAN_BOOST_MODE_NORMAL) { | 
 | 		if (mask & ASUS_FAN_BOOST_MODE_OVERBOOST_MASK) | 
 | 			asus->fan_boost_mode = ASUS_FAN_BOOST_MODE_OVERBOOST; | 
 | 		else if (mask & ASUS_FAN_BOOST_MODE_SILENT_MASK) | 
 | 			asus->fan_boost_mode = ASUS_FAN_BOOST_MODE_SILENT; | 
 | 	} else if (asus->fan_boost_mode == ASUS_FAN_BOOST_MODE_OVERBOOST) { | 
 | 		if (mask & ASUS_FAN_BOOST_MODE_SILENT_MASK) | 
 | 			asus->fan_boost_mode = ASUS_FAN_BOOST_MODE_SILENT; | 
 | 		else | 
 | 			asus->fan_boost_mode = ASUS_FAN_BOOST_MODE_NORMAL; | 
 | 	} else { | 
 | 		asus->fan_boost_mode = ASUS_FAN_BOOST_MODE_NORMAL; | 
 | 	} | 
 |  | 
 | 	return fan_boost_mode_write(asus); | 
 | } | 
 |  | 
 | static ssize_t fan_boost_mode_show(struct device *dev, | 
 | 				   struct device_attribute *attr, char *buf) | 
 | { | 
 | 	struct asus_wmi *asus = dev_get_drvdata(dev); | 
 |  | 
 | 	return scnprintf(buf, PAGE_SIZE, "%d\n", asus->fan_boost_mode); | 
 | } | 
 |  | 
 | static ssize_t fan_boost_mode_store(struct device *dev, | 
 | 				    struct device_attribute *attr, | 
 | 				    const char *buf, size_t count) | 
 | { | 
 | 	int result; | 
 | 	u8 new_mode; | 
 | 	struct asus_wmi *asus = dev_get_drvdata(dev); | 
 | 	u8 mask = asus->fan_boost_mode_mask; | 
 |  | 
 | 	result = kstrtou8(buf, 10, &new_mode); | 
 | 	if (result < 0) { | 
 | 		pr_warn("Trying to store invalid value\n"); | 
 | 		return result; | 
 | 	} | 
 |  | 
 | 	if (new_mode == ASUS_FAN_BOOST_MODE_OVERBOOST) { | 
 | 		if (!(mask & ASUS_FAN_BOOST_MODE_OVERBOOST_MASK)) | 
 | 			return -EINVAL; | 
 | 	} else if (new_mode == ASUS_FAN_BOOST_MODE_SILENT) { | 
 | 		if (!(mask & ASUS_FAN_BOOST_MODE_SILENT_MASK)) | 
 | 			return -EINVAL; | 
 | 	} else if (new_mode != ASUS_FAN_BOOST_MODE_NORMAL) { | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	asus->fan_boost_mode = new_mode; | 
 | 	fan_boost_mode_write(asus); | 
 |  | 
 | 	return result; | 
 | } | 
 |  | 
 | // Fan boost mode: 0 - normal, 1 - overboost, 2 - silent | 
 | static DEVICE_ATTR_RW(fan_boost_mode); | 
 |  | 
 | /* Backlight ******************************************************************/ | 
 |  | 
 | static int read_backlight_power(struct asus_wmi *asus) | 
 | { | 
 | 	int ret; | 
 |  | 
 | 	if (asus->driver->quirks->store_backlight_power) | 
 | 		ret = !asus->driver->panel_power; | 
 | 	else | 
 | 		ret = asus_wmi_get_devstate_simple(asus, | 
 | 						   ASUS_WMI_DEVID_BACKLIGHT); | 
 |  | 
 | 	if (ret < 0) | 
 | 		return ret; | 
 |  | 
 | 	return ret ? FB_BLANK_UNBLANK : FB_BLANK_POWERDOWN; | 
 | } | 
 |  | 
 | static int read_brightness_max(struct asus_wmi *asus) | 
 | { | 
 | 	u32 retval; | 
 | 	int err; | 
 |  | 
 | 	err = asus_wmi_get_devstate(asus, ASUS_WMI_DEVID_BRIGHTNESS, &retval); | 
 | 	if (err < 0) | 
 | 		return err; | 
 |  | 
 | 	retval = retval & ASUS_WMI_DSTS_MAX_BRIGTH_MASK; | 
 | 	retval >>= 8; | 
 |  | 
 | 	if (!retval) | 
 | 		return -ENODEV; | 
 |  | 
 | 	return retval; | 
 | } | 
 |  | 
 | static int read_brightness(struct backlight_device *bd) | 
 | { | 
 | 	struct asus_wmi *asus = bl_get_data(bd); | 
 | 	u32 retval; | 
 | 	int err; | 
 |  | 
 | 	err = asus_wmi_get_devstate(asus, ASUS_WMI_DEVID_BRIGHTNESS, &retval); | 
 | 	if (err < 0) | 
 | 		return err; | 
 |  | 
 | 	return retval & ASUS_WMI_DSTS_BRIGHTNESS_MASK; | 
 | } | 
 |  | 
 | static u32 get_scalar_command(struct backlight_device *bd) | 
 | { | 
 | 	struct asus_wmi *asus = bl_get_data(bd); | 
 | 	u32 ctrl_param = 0; | 
 |  | 
 | 	if ((asus->driver->brightness < bd->props.brightness) || | 
 | 	    bd->props.brightness == bd->props.max_brightness) | 
 | 		ctrl_param = 0x00008001; | 
 | 	else if ((asus->driver->brightness > bd->props.brightness) || | 
 | 		 bd->props.brightness == 0) | 
 | 		ctrl_param = 0x00008000; | 
 |  | 
 | 	asus->driver->brightness = bd->props.brightness; | 
 |  | 
 | 	return ctrl_param; | 
 | } | 
 |  | 
 | static int update_bl_status(struct backlight_device *bd) | 
 | { | 
 | 	struct asus_wmi *asus = bl_get_data(bd); | 
 | 	u32 ctrl_param; | 
 | 	int power, err = 0; | 
 |  | 
 | 	power = read_backlight_power(asus); | 
 | 	if (power != -ENODEV && bd->props.power != power) { | 
 | 		ctrl_param = !!(bd->props.power == FB_BLANK_UNBLANK); | 
 | 		err = asus_wmi_set_devstate(ASUS_WMI_DEVID_BACKLIGHT, | 
 | 					    ctrl_param, NULL); | 
 | 		if (asus->driver->quirks->store_backlight_power) | 
 | 			asus->driver->panel_power = bd->props.power; | 
 |  | 
 | 		/* When using scalar brightness, updating the brightness | 
 | 		 * will mess with the backlight power */ | 
 | 		if (asus->driver->quirks->scalar_panel_brightness) | 
 | 			return err; | 
 | 	} | 
 |  | 
 | 	if (asus->driver->quirks->scalar_panel_brightness) | 
 | 		ctrl_param = get_scalar_command(bd); | 
 | 	else | 
 | 		ctrl_param = bd->props.brightness; | 
 |  | 
 | 	err = asus_wmi_set_devstate(ASUS_WMI_DEVID_BRIGHTNESS, | 
 | 				    ctrl_param, NULL); | 
 |  | 
 | 	return err; | 
 | } | 
 |  | 
 | static const struct backlight_ops asus_wmi_bl_ops = { | 
 | 	.get_brightness = read_brightness, | 
 | 	.update_status = update_bl_status, | 
 | }; | 
 |  | 
 | static int asus_wmi_backlight_notify(struct asus_wmi *asus, int code) | 
 | { | 
 | 	struct backlight_device *bd = asus->backlight_device; | 
 | 	int old = bd->props.brightness; | 
 | 	int new = old; | 
 |  | 
 | 	if (code >= NOTIFY_BRNUP_MIN && code <= NOTIFY_BRNUP_MAX) | 
 | 		new = code - NOTIFY_BRNUP_MIN + 1; | 
 | 	else if (code >= NOTIFY_BRNDOWN_MIN && code <= NOTIFY_BRNDOWN_MAX) | 
 | 		new = code - NOTIFY_BRNDOWN_MIN; | 
 |  | 
 | 	bd->props.brightness = new; | 
 | 	backlight_update_status(bd); | 
 | 	backlight_force_update(bd, BACKLIGHT_UPDATE_HOTKEY); | 
 |  | 
 | 	return old; | 
 | } | 
 |  | 
 | static int asus_wmi_backlight_init(struct asus_wmi *asus) | 
 | { | 
 | 	struct backlight_device *bd; | 
 | 	struct backlight_properties props; | 
 | 	int max; | 
 | 	int power; | 
 |  | 
 | 	max = read_brightness_max(asus); | 
 | 	if (max < 0) | 
 | 		return max; | 
 |  | 
 | 	power = read_backlight_power(asus); | 
 | 	if (power == -ENODEV) | 
 | 		power = FB_BLANK_UNBLANK; | 
 | 	else if (power < 0) | 
 | 		return power; | 
 |  | 
 | 	memset(&props, 0, sizeof(struct backlight_properties)); | 
 | 	props.type = BACKLIGHT_PLATFORM; | 
 | 	props.max_brightness = max; | 
 | 	bd = backlight_device_register(asus->driver->name, | 
 | 				       &asus->platform_device->dev, asus, | 
 | 				       &asus_wmi_bl_ops, &props); | 
 | 	if (IS_ERR(bd)) { | 
 | 		pr_err("Could not register backlight device\n"); | 
 | 		return PTR_ERR(bd); | 
 | 	} | 
 |  | 
 | 	asus->backlight_device = bd; | 
 |  | 
 | 	if (asus->driver->quirks->store_backlight_power) | 
 | 		asus->driver->panel_power = power; | 
 |  | 
 | 	bd->props.brightness = read_brightness(bd); | 
 | 	bd->props.power = power; | 
 | 	backlight_update_status(bd); | 
 |  | 
 | 	asus->driver->brightness = bd->props.brightness; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void asus_wmi_backlight_exit(struct asus_wmi *asus) | 
 | { | 
 | 	backlight_device_unregister(asus->backlight_device); | 
 |  | 
 | 	asus->backlight_device = NULL; | 
 | } | 
 |  | 
 | static int is_display_toggle(int code) | 
 | { | 
 | 	/* display toggle keys */ | 
 | 	if ((code >= 0x61 && code <= 0x67) || | 
 | 	    (code >= 0x8c && code <= 0x93) || | 
 | 	    (code >= 0xa0 && code <= 0xa7) || | 
 | 	    (code >= 0xd0 && code <= 0xd5)) | 
 | 		return 1; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* Fn-lock ********************************************************************/ | 
 |  | 
 | static bool asus_wmi_has_fnlock_key(struct asus_wmi *asus) | 
 | { | 
 | 	u32 result; | 
 |  | 
 | 	asus_wmi_get_devstate(asus, ASUS_WMI_DEVID_FNLOCK, &result); | 
 |  | 
 | 	return (result & ASUS_WMI_DSTS_PRESENCE_BIT) && | 
 | 		!(result & ASUS_WMI_FNLOCK_BIOS_DISABLED); | 
 | } | 
 |  | 
 | static void asus_wmi_fnlock_update(struct asus_wmi *asus) | 
 | { | 
 | 	int mode = asus->fnlock_locked; | 
 |  | 
 | 	asus_wmi_set_devstate(ASUS_WMI_DEVID_FNLOCK, mode, NULL); | 
 | } | 
 |  | 
 | /* WMI events *****************************************************************/ | 
 |  | 
 | static int asus_wmi_get_event_code(u32 value) | 
 | { | 
 | 	struct acpi_buffer response = { ACPI_ALLOCATE_BUFFER, NULL }; | 
 | 	union acpi_object *obj; | 
 | 	acpi_status status; | 
 | 	int code; | 
 |  | 
 | 	status = wmi_get_event_data(value, &response); | 
 | 	if (ACPI_FAILURE(status)) { | 
 | 		pr_warn("Failed to get WMI notify code: %s\n", | 
 | 				acpi_format_exception(status)); | 
 | 		return -EIO; | 
 | 	} | 
 |  | 
 | 	obj = (union acpi_object *)response.pointer; | 
 |  | 
 | 	if (obj && obj->type == ACPI_TYPE_INTEGER) | 
 | 		code = (int)(obj->integer.value & WMI_EVENT_MASK); | 
 | 	else | 
 | 		code = -EIO; | 
 |  | 
 | 	kfree(obj); | 
 | 	return code; | 
 | } | 
 |  | 
 | static void asus_wmi_handle_event_code(int code, struct asus_wmi *asus) | 
 | { | 
 | 	int orig_code; | 
 | 	unsigned int key_value = 1; | 
 | 	bool autorelease = 1; | 
 |  | 
 | 	orig_code = code; | 
 |  | 
 | 	if (asus->driver->key_filter) { | 
 | 		asus->driver->key_filter(asus->driver, &code, &key_value, | 
 | 					 &autorelease); | 
 | 		if (code == ASUS_WMI_KEY_IGNORE) | 
 | 			return; | 
 | 	} | 
 |  | 
 | 	if (code >= NOTIFY_BRNUP_MIN && code <= NOTIFY_BRNUP_MAX) | 
 | 		code = ASUS_WMI_BRN_UP; | 
 | 	else if (code >= NOTIFY_BRNDOWN_MIN && code <= NOTIFY_BRNDOWN_MAX) | 
 | 		code = ASUS_WMI_BRN_DOWN; | 
 |  | 
 | 	if (code == ASUS_WMI_BRN_DOWN || code == ASUS_WMI_BRN_UP) { | 
 | 		if (acpi_video_get_backlight_type() == acpi_backlight_vendor) { | 
 | 			asus_wmi_backlight_notify(asus, orig_code); | 
 | 			return; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	if (code == NOTIFY_KBD_BRTUP) { | 
 | 		kbd_led_set_by_kbd(asus, asus->kbd_led_wk + 1); | 
 | 		return; | 
 | 	} | 
 | 	if (code == NOTIFY_KBD_BRTDWN) { | 
 | 		kbd_led_set_by_kbd(asus, asus->kbd_led_wk - 1); | 
 | 		return; | 
 | 	} | 
 | 	if (code == NOTIFY_KBD_BRTTOGGLE) { | 
 | 		if (asus->kbd_led_wk == asus->kbd_led.max_brightness) | 
 | 			kbd_led_set_by_kbd(asus, 0); | 
 | 		else | 
 | 			kbd_led_set_by_kbd(asus, asus->kbd_led_wk + 1); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	if (code == NOTIFY_FNLOCK_TOGGLE) { | 
 | 		asus->fnlock_locked = !asus->fnlock_locked; | 
 | 		asus_wmi_fnlock_update(asus); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	if (asus->fan_boost_mode_available && code == NOTIFY_KBD_FBM) { | 
 | 		fan_boost_mode_switch_next(asus); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	if (is_display_toggle(code) && asus->driver->quirks->no_display_toggle) | 
 | 		return; | 
 |  | 
 | 	if (!sparse_keymap_report_event(asus->inputdev, code, | 
 | 					key_value, autorelease)) | 
 | 		pr_info("Unknown key %x pressed\n", code); | 
 | } | 
 |  | 
 | static void asus_wmi_notify(u32 value, void *context) | 
 | { | 
 | 	struct asus_wmi *asus = context; | 
 | 	int code; | 
 | 	int i; | 
 |  | 
 | 	for (i = 0; i < WMI_EVENT_QUEUE_SIZE + 1; i++) { | 
 | 		code = asus_wmi_get_event_code(value); | 
 | 		if (code < 0) { | 
 | 			pr_warn("Failed to get notify code: %d\n", code); | 
 | 			return; | 
 | 		} | 
 |  | 
 | 		if (code == WMI_EVENT_QUEUE_END || code == WMI_EVENT_MASK) | 
 | 			return; | 
 |  | 
 | 		asus_wmi_handle_event_code(code, asus); | 
 |  | 
 | 		/* | 
 | 		 * Double check that queue is present: | 
 | 		 * ATK (with queue) uses 0xff, ASUSWMI (without) 0xd2. | 
 | 		 */ | 
 | 		if (!asus->wmi_event_queue || value != WMI_EVENT_VALUE_ATK) | 
 | 			return; | 
 | 	} | 
 |  | 
 | 	pr_warn("Failed to process event queue, last code: 0x%x\n", code); | 
 | } | 
 |  | 
 | static int asus_wmi_notify_queue_flush(struct asus_wmi *asus) | 
 | { | 
 | 	int code; | 
 | 	int i; | 
 |  | 
 | 	for (i = 0; i < WMI_EVENT_QUEUE_SIZE + 1; i++) { | 
 | 		code = asus_wmi_get_event_code(WMI_EVENT_VALUE_ATK); | 
 | 		if (code < 0) { | 
 | 			pr_warn("Failed to get event during flush: %d\n", code); | 
 | 			return code; | 
 | 		} | 
 |  | 
 | 		if (code == WMI_EVENT_QUEUE_END || code == WMI_EVENT_MASK) | 
 | 			return 0; | 
 | 	} | 
 |  | 
 | 	pr_warn("Failed to flush event queue\n"); | 
 | 	return -EIO; | 
 | } | 
 |  | 
 | /* Sysfs **********************************************************************/ | 
 |  | 
 | static ssize_t store_sys_wmi(struct asus_wmi *asus, int devid, | 
 | 			     const char *buf, size_t count) | 
 | { | 
 | 	u32 retval; | 
 | 	int err, value; | 
 |  | 
 | 	value = asus_wmi_get_devstate_simple(asus, devid); | 
 | 	if (value < 0) | 
 | 		return value; | 
 |  | 
 | 	err = kstrtoint(buf, 0, &value); | 
 | 	if (err) | 
 | 		return err; | 
 |  | 
 | 	err = asus_wmi_set_devstate(devid, value, &retval); | 
 | 	if (err < 0) | 
 | 		return err; | 
 |  | 
 | 	return count; | 
 | } | 
 |  | 
 | static ssize_t show_sys_wmi(struct asus_wmi *asus, int devid, char *buf) | 
 | { | 
 | 	int value = asus_wmi_get_devstate_simple(asus, devid); | 
 |  | 
 | 	if (value < 0) | 
 | 		return value; | 
 |  | 
 | 	return sprintf(buf, "%d\n", value); | 
 | } | 
 |  | 
 | #define ASUS_WMI_CREATE_DEVICE_ATTR(_name, _mode, _cm)			\ | 
 | 	static ssize_t show_##_name(struct device *dev,			\ | 
 | 				    struct device_attribute *attr,	\ | 
 | 				    char *buf)				\ | 
 | 	{								\ | 
 | 		struct asus_wmi *asus = dev_get_drvdata(dev);		\ | 
 | 									\ | 
 | 		return show_sys_wmi(asus, _cm, buf);			\ | 
 | 	}								\ | 
 | 	static ssize_t store_##_name(struct device *dev,		\ | 
 | 				     struct device_attribute *attr,	\ | 
 | 				     const char *buf, size_t count)	\ | 
 | 	{								\ | 
 | 		struct asus_wmi *asus = dev_get_drvdata(dev);		\ | 
 | 									\ | 
 | 		return store_sys_wmi(asus, _cm, buf, count);		\ | 
 | 	}								\ | 
 | 	static struct device_attribute dev_attr_##_name = {		\ | 
 | 		.attr = {						\ | 
 | 			.name = __stringify(_name),			\ | 
 | 			.mode = _mode },				\ | 
 | 		.show   = show_##_name,					\ | 
 | 		.store  = store_##_name,				\ | 
 | 	} | 
 |  | 
 | ASUS_WMI_CREATE_DEVICE_ATTR(touchpad, 0644, ASUS_WMI_DEVID_TOUCHPAD); | 
 | ASUS_WMI_CREATE_DEVICE_ATTR(camera, 0644, ASUS_WMI_DEVID_CAMERA); | 
 | ASUS_WMI_CREATE_DEVICE_ATTR(cardr, 0644, ASUS_WMI_DEVID_CARDREADER); | 
 | ASUS_WMI_CREATE_DEVICE_ATTR(lid_resume, 0644, ASUS_WMI_DEVID_LID_RESUME); | 
 | ASUS_WMI_CREATE_DEVICE_ATTR(als_enable, 0644, ASUS_WMI_DEVID_ALS_ENABLE); | 
 |  | 
 | static ssize_t cpufv_store(struct device *dev, struct device_attribute *attr, | 
 | 			   const char *buf, size_t count) | 
 | { | 
 | 	int value, rv; | 
 |  | 
 | 	rv = kstrtoint(buf, 0, &value); | 
 | 	if (rv) | 
 | 		return rv; | 
 |  | 
 | 	if (value < 0 || value > 2) | 
 | 		return -EINVAL; | 
 |  | 
 | 	rv = asus_wmi_evaluate_method(ASUS_WMI_METHODID_CFVS, value, 0, NULL); | 
 | 	if (rv < 0) | 
 | 		return rv; | 
 |  | 
 | 	return count; | 
 | } | 
 |  | 
 | static DEVICE_ATTR_WO(cpufv); | 
 |  | 
 | static struct attribute *platform_attributes[] = { | 
 | 	&dev_attr_cpufv.attr, | 
 | 	&dev_attr_camera.attr, | 
 | 	&dev_attr_cardr.attr, | 
 | 	&dev_attr_touchpad.attr, | 
 | 	&dev_attr_lid_resume.attr, | 
 | 	&dev_attr_als_enable.attr, | 
 | 	&dev_attr_fan_boost_mode.attr, | 
 | 	NULL | 
 | }; | 
 |  | 
 | static umode_t asus_sysfs_is_visible(struct kobject *kobj, | 
 | 				    struct attribute *attr, int idx) | 
 | { | 
 | 	struct device *dev = container_of(kobj, struct device, kobj); | 
 | 	struct asus_wmi *asus = dev_get_drvdata(dev); | 
 | 	bool ok = true; | 
 | 	int devid = -1; | 
 |  | 
 | 	if (attr == &dev_attr_camera.attr) | 
 | 		devid = ASUS_WMI_DEVID_CAMERA; | 
 | 	else if (attr == &dev_attr_cardr.attr) | 
 | 		devid = ASUS_WMI_DEVID_CARDREADER; | 
 | 	else if (attr == &dev_attr_touchpad.attr) | 
 | 		devid = ASUS_WMI_DEVID_TOUCHPAD; | 
 | 	else if (attr == &dev_attr_lid_resume.attr) | 
 | 		devid = ASUS_WMI_DEVID_LID_RESUME; | 
 | 	else if (attr == &dev_attr_als_enable.attr) | 
 | 		devid = ASUS_WMI_DEVID_ALS_ENABLE; | 
 | 	else if (attr == &dev_attr_fan_boost_mode.attr) | 
 | 		ok = asus->fan_boost_mode_available; | 
 |  | 
 | 	if (devid != -1) | 
 | 		ok = !(asus_wmi_get_devstate_simple(asus, devid) < 0); | 
 |  | 
 | 	return ok ? attr->mode : 0; | 
 | } | 
 |  | 
 | static const struct attribute_group platform_attribute_group = { | 
 | 	.is_visible = asus_sysfs_is_visible, | 
 | 	.attrs = platform_attributes | 
 | }; | 
 |  | 
 | static void asus_wmi_sysfs_exit(struct platform_device *device) | 
 | { | 
 | 	sysfs_remove_group(&device->dev.kobj, &platform_attribute_group); | 
 | } | 
 |  | 
 | static int asus_wmi_sysfs_init(struct platform_device *device) | 
 | { | 
 | 	return sysfs_create_group(&device->dev.kobj, &platform_attribute_group); | 
 | } | 
 |  | 
 | /* Platform device ************************************************************/ | 
 |  | 
 | static int asus_wmi_platform_init(struct asus_wmi *asus) | 
 | { | 
 | 	struct device *dev = &asus->platform_device->dev; | 
 | 	char *wmi_uid; | 
 | 	int rv; | 
 |  | 
 | 	/* INIT enable hotkeys on some models */ | 
 | 	if (!asus_wmi_evaluate_method(ASUS_WMI_METHODID_INIT, 0, 0, &rv)) | 
 | 		pr_info("Initialization: %#x\n", rv); | 
 |  | 
 | 	/* We don't know yet what to do with this version... */ | 
 | 	if (!asus_wmi_evaluate_method(ASUS_WMI_METHODID_SPEC, 0, 0x9, &rv)) { | 
 | 		pr_info("BIOS WMI version: %d.%d\n", rv >> 16, rv & 0xFF); | 
 | 		asus->spec = rv; | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * The SFUN method probably allows the original driver to get the list | 
 | 	 * of features supported by a given model. For now, 0x0100 or 0x0800 | 
 | 	 * bit signifies that the laptop is equipped with a Wi-Fi MiniPCI card. | 
 | 	 * The significance of others is yet to be found. | 
 | 	 */ | 
 | 	if (!asus_wmi_evaluate_method(ASUS_WMI_METHODID_SFUN, 0, 0, &rv)) { | 
 | 		pr_info("SFUN value: %#x\n", rv); | 
 | 		asus->sfun = rv; | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * Eee PC and Notebooks seems to have different method_id for DSTS, | 
 | 	 * but it may also be related to the BIOS's SPEC. | 
 | 	 * Note, on most Eeepc, there is no way to check if a method exist | 
 | 	 * or note, while on notebooks, they returns 0xFFFFFFFE on failure, | 
 | 	 * but once again, SPEC may probably be used for that kind of things. | 
 | 	 * | 
 | 	 * Additionally at least TUF Gaming series laptops return nothing for | 
 | 	 * unknown methods, so the detection in this way is not possible. | 
 | 	 * | 
 | 	 * There is strong indication that only ACPI WMI devices that have _UID | 
 | 	 * equal to "ASUSWMI" use DCTS whereas those with "ATK" use DSTS. | 
 | 	 */ | 
 | 	wmi_uid = wmi_get_acpi_device_uid(ASUS_WMI_MGMT_GUID); | 
 | 	if (!wmi_uid) | 
 | 		return -ENODEV; | 
 |  | 
 | 	if (!strcmp(wmi_uid, ASUS_ACPI_UID_ASUSWMI)) { | 
 | 		dev_info(dev, "Detected ASUSWMI, use DCTS\n"); | 
 | 		asus->dsts_id = ASUS_WMI_METHODID_DCTS; | 
 | 	} else { | 
 | 		dev_info(dev, "Detected %s, not ASUSWMI, use DSTS\n", wmi_uid); | 
 | 		asus->dsts_id = ASUS_WMI_METHODID_DSTS; | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * Some devices can have multiple event codes stored in a queue before | 
 | 	 * the module load if it was unloaded intermittently after calling | 
 | 	 * the INIT method (enables event handling). The WMI notify handler is | 
 | 	 * expected to retrieve all event codes until a retrieved code equals | 
 | 	 * queue end marker (One or Ones). Old codes are flushed from the queue | 
 | 	 * upon module load. Not enabling this when it should be has minimal | 
 | 	 * visible impact so fall back if anything goes wrong. | 
 | 	 */ | 
 | 	wmi_uid = wmi_get_acpi_device_uid(asus->driver->event_guid); | 
 | 	if (wmi_uid && !strcmp(wmi_uid, ASUS_ACPI_UID_ATK)) { | 
 | 		dev_info(dev, "Detected ATK, enable event queue\n"); | 
 |  | 
 | 		if (!asus_wmi_notify_queue_flush(asus)) | 
 | 			asus->wmi_event_queue = true; | 
 | 	} | 
 |  | 
 | 	/* CWAP allow to define the behavior of the Fn+F2 key, | 
 | 	 * this method doesn't seems to be present on Eee PCs */ | 
 | 	if (asus->driver->quirks->wapf >= 0) | 
 | 		asus_wmi_set_devstate(ASUS_WMI_DEVID_CWAP, | 
 | 				      asus->driver->quirks->wapf, NULL); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* debugfs ********************************************************************/ | 
 |  | 
 | struct asus_wmi_debugfs_node { | 
 | 	struct asus_wmi *asus; | 
 | 	char *name; | 
 | 	int (*show) (struct seq_file *m, void *data); | 
 | }; | 
 |  | 
 | static int show_dsts(struct seq_file *m, void *data) | 
 | { | 
 | 	struct asus_wmi *asus = m->private; | 
 | 	int err; | 
 | 	u32 retval = -1; | 
 |  | 
 | 	err = asus_wmi_get_devstate(asus, asus->debug.dev_id, &retval); | 
 | 	if (err < 0) | 
 | 		return err; | 
 |  | 
 | 	seq_printf(m, "DSTS(%#x) = %#x\n", asus->debug.dev_id, retval); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int show_devs(struct seq_file *m, void *data) | 
 | { | 
 | 	struct asus_wmi *asus = m->private; | 
 | 	int err; | 
 | 	u32 retval = -1; | 
 |  | 
 | 	err = asus_wmi_set_devstate(asus->debug.dev_id, asus->debug.ctrl_param, | 
 | 				    &retval); | 
 | 	if (err < 0) | 
 | 		return err; | 
 |  | 
 | 	seq_printf(m, "DEVS(%#x, %#x) = %#x\n", asus->debug.dev_id, | 
 | 		   asus->debug.ctrl_param, retval); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int show_call(struct seq_file *m, void *data) | 
 | { | 
 | 	struct asus_wmi *asus = m->private; | 
 | 	struct bios_args args = { | 
 | 		.arg0 = asus->debug.dev_id, | 
 | 		.arg1 = asus->debug.ctrl_param, | 
 | 	}; | 
 | 	struct acpi_buffer input = { (acpi_size) sizeof(args), &args }; | 
 | 	struct acpi_buffer output = { ACPI_ALLOCATE_BUFFER, NULL }; | 
 | 	union acpi_object *obj; | 
 | 	acpi_status status; | 
 |  | 
 | 	status = wmi_evaluate_method(ASUS_WMI_MGMT_GUID, | 
 | 				     0, asus->debug.method_id, | 
 | 				     &input, &output); | 
 |  | 
 | 	if (ACPI_FAILURE(status)) | 
 | 		return -EIO; | 
 |  | 
 | 	obj = (union acpi_object *)output.pointer; | 
 | 	if (obj && obj->type == ACPI_TYPE_INTEGER) | 
 | 		seq_printf(m, "%#x(%#x, %#x) = %#x\n", asus->debug.method_id, | 
 | 			   asus->debug.dev_id, asus->debug.ctrl_param, | 
 | 			   (u32) obj->integer.value); | 
 | 	else | 
 | 		seq_printf(m, "%#x(%#x, %#x) = t:%d\n", asus->debug.method_id, | 
 | 			   asus->debug.dev_id, asus->debug.ctrl_param, | 
 | 			   obj ? obj->type : -1); | 
 |  | 
 | 	kfree(obj); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static struct asus_wmi_debugfs_node asus_wmi_debug_files[] = { | 
 | 	{NULL, "devs", show_devs}, | 
 | 	{NULL, "dsts", show_dsts}, | 
 | 	{NULL, "call", show_call}, | 
 | }; | 
 |  | 
 | static int asus_wmi_debugfs_open(struct inode *inode, struct file *file) | 
 | { | 
 | 	struct asus_wmi_debugfs_node *node = inode->i_private; | 
 |  | 
 | 	return single_open(file, node->show, node->asus); | 
 | } | 
 |  | 
 | static const struct file_operations asus_wmi_debugfs_io_ops = { | 
 | 	.owner = THIS_MODULE, | 
 | 	.open = asus_wmi_debugfs_open, | 
 | 	.read = seq_read, | 
 | 	.llseek = seq_lseek, | 
 | 	.release = single_release, | 
 | }; | 
 |  | 
 | static void asus_wmi_debugfs_exit(struct asus_wmi *asus) | 
 | { | 
 | 	debugfs_remove_recursive(asus->debug.root); | 
 | } | 
 |  | 
 | static void asus_wmi_debugfs_init(struct asus_wmi *asus) | 
 | { | 
 | 	int i; | 
 |  | 
 | 	asus->debug.root = debugfs_create_dir(asus->driver->name, NULL); | 
 |  | 
 | 	debugfs_create_x32("method_id", S_IRUGO | S_IWUSR, asus->debug.root, | 
 | 			   &asus->debug.method_id); | 
 |  | 
 | 	debugfs_create_x32("dev_id", S_IRUGO | S_IWUSR, asus->debug.root, | 
 | 			   &asus->debug.dev_id); | 
 |  | 
 | 	debugfs_create_x32("ctrl_param", S_IRUGO | S_IWUSR, asus->debug.root, | 
 | 			   &asus->debug.ctrl_param); | 
 |  | 
 | 	for (i = 0; i < ARRAY_SIZE(asus_wmi_debug_files); i++) { | 
 | 		struct asus_wmi_debugfs_node *node = &asus_wmi_debug_files[i]; | 
 |  | 
 | 		node->asus = asus; | 
 | 		debugfs_create_file(node->name, S_IFREG | S_IRUGO, | 
 | 				    asus->debug.root, node, | 
 | 				    &asus_wmi_debugfs_io_ops); | 
 | 	} | 
 | } | 
 |  | 
 | /* Init / exit ****************************************************************/ | 
 |  | 
 | static int asus_wmi_add(struct platform_device *pdev) | 
 | { | 
 | 	struct platform_driver *pdrv = to_platform_driver(pdev->dev.driver); | 
 | 	struct asus_wmi_driver *wdrv = to_asus_wmi_driver(pdrv); | 
 | 	struct asus_wmi *asus; | 
 | 	const char *chassis_type; | 
 | 	acpi_status status; | 
 | 	int err; | 
 | 	u32 result; | 
 |  | 
 | 	asus = kzalloc(sizeof(struct asus_wmi), GFP_KERNEL); | 
 | 	if (!asus) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	asus->driver = wdrv; | 
 | 	asus->platform_device = pdev; | 
 | 	wdrv->platform_device = pdev; | 
 | 	platform_set_drvdata(asus->platform_device, asus); | 
 |  | 
 | 	if (wdrv->detect_quirks) | 
 | 		wdrv->detect_quirks(asus->driver); | 
 |  | 
 | 	err = asus_wmi_platform_init(asus); | 
 | 	if (err) | 
 | 		goto fail_platform; | 
 |  | 
 | 	err = fan_boost_mode_check_present(asus); | 
 | 	if (err) | 
 | 		goto fail_fan_boost_mode; | 
 |  | 
 | 	err = asus_wmi_sysfs_init(asus->platform_device); | 
 | 	if (err) | 
 | 		goto fail_sysfs; | 
 |  | 
 | 	err = asus_wmi_input_init(asus); | 
 | 	if (err) | 
 | 		goto fail_input; | 
 |  | 
 | 	err = asus_wmi_fan_init(asus); /* probably no problems on error */ | 
 |  | 
 | 	err = asus_wmi_hwmon_init(asus); | 
 | 	if (err) | 
 | 		goto fail_hwmon; | 
 |  | 
 | 	err = asus_wmi_led_init(asus); | 
 | 	if (err) | 
 | 		goto fail_leds; | 
 |  | 
 | 	asus_wmi_get_devstate(asus, ASUS_WMI_DEVID_WLAN, &result); | 
 | 	if (result & (ASUS_WMI_DSTS_PRESENCE_BIT | ASUS_WMI_DSTS_USER_BIT)) | 
 | 		asus->driver->wlan_ctrl_by_user = 1; | 
 |  | 
 | 	if (!(asus->driver->wlan_ctrl_by_user && ashs_present())) { | 
 | 		err = asus_wmi_rfkill_init(asus); | 
 | 		if (err) | 
 | 			goto fail_rfkill; | 
 | 	} | 
 |  | 
 | 	if (asus->driver->quirks->wmi_force_als_set) | 
 | 		asus_wmi_set_als(); | 
 |  | 
 | 	/* Some Asus desktop boards export an acpi-video backlight interface, | 
 | 	   stop this from showing up */ | 
 | 	chassis_type = dmi_get_system_info(DMI_CHASSIS_TYPE); | 
 | 	if (chassis_type && !strcmp(chassis_type, "3")) | 
 | 		acpi_video_set_dmi_backlight_type(acpi_backlight_vendor); | 
 |  | 
 | 	if (asus->driver->quirks->wmi_backlight_power) | 
 | 		acpi_video_set_dmi_backlight_type(acpi_backlight_vendor); | 
 |  | 
 | 	if (asus->driver->quirks->wmi_backlight_native) | 
 | 		acpi_video_set_dmi_backlight_type(acpi_backlight_native); | 
 |  | 
 | 	if (asus->driver->quirks->xusb2pr) | 
 | 		asus_wmi_set_xusb2pr(asus); | 
 |  | 
 | 	if (acpi_video_get_backlight_type() == acpi_backlight_vendor) { | 
 | 		err = asus_wmi_backlight_init(asus); | 
 | 		if (err && err != -ENODEV) | 
 | 			goto fail_backlight; | 
 | 	} else if (asus->driver->quirks->wmi_backlight_set_devstate) | 
 | 		err = asus_wmi_set_devstate(ASUS_WMI_DEVID_BACKLIGHT, 2, NULL); | 
 |  | 
 | 	if (asus_wmi_has_fnlock_key(asus)) { | 
 | 		asus->fnlock_locked = true; | 
 | 		asus_wmi_fnlock_update(asus); | 
 | 	} | 
 |  | 
 | 	status = wmi_install_notify_handler(asus->driver->event_guid, | 
 | 					    asus_wmi_notify, asus); | 
 | 	if (ACPI_FAILURE(status)) { | 
 | 		pr_err("Unable to register notify handler - %d\n", status); | 
 | 		err = -ENODEV; | 
 | 		goto fail_wmi_handler; | 
 | 	} | 
 |  | 
 | 	asus_wmi_battery_init(asus); | 
 |  | 
 | 	asus_wmi_debugfs_init(asus); | 
 |  | 
 | 	return 0; | 
 |  | 
 | fail_wmi_handler: | 
 | 	asus_wmi_backlight_exit(asus); | 
 | fail_backlight: | 
 | 	asus_wmi_rfkill_exit(asus); | 
 | fail_rfkill: | 
 | 	asus_wmi_led_exit(asus); | 
 | fail_leds: | 
 | fail_hwmon: | 
 | 	asus_wmi_input_exit(asus); | 
 | fail_input: | 
 | 	asus_wmi_sysfs_exit(asus->platform_device); | 
 | fail_sysfs: | 
 | fail_fan_boost_mode: | 
 | fail_platform: | 
 | 	kfree(asus); | 
 | 	return err; | 
 | } | 
 |  | 
 | static int asus_wmi_remove(struct platform_device *device) | 
 | { | 
 | 	struct asus_wmi *asus; | 
 |  | 
 | 	asus = platform_get_drvdata(device); | 
 | 	wmi_remove_notify_handler(asus->driver->event_guid); | 
 | 	asus_wmi_backlight_exit(asus); | 
 | 	asus_wmi_input_exit(asus); | 
 | 	asus_wmi_led_exit(asus); | 
 | 	asus_wmi_rfkill_exit(asus); | 
 | 	asus_wmi_debugfs_exit(asus); | 
 | 	asus_wmi_sysfs_exit(asus->platform_device); | 
 | 	asus_fan_set_auto(asus); | 
 | 	asus_wmi_battery_exit(asus); | 
 |  | 
 | 	kfree(asus); | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* Platform driver - hibernate/resume callbacks *******************************/ | 
 |  | 
 | static int asus_hotk_thaw(struct device *device) | 
 | { | 
 | 	struct asus_wmi *asus = dev_get_drvdata(device); | 
 |  | 
 | 	if (asus->wlan.rfkill) { | 
 | 		bool wlan; | 
 |  | 
 | 		/* | 
 | 		 * Work around bios bug - acpi _PTS turns off the wireless led | 
 | 		 * during suspend.  Normally it restores it on resume, but | 
 | 		 * we should kick it ourselves in case hibernation is aborted. | 
 | 		 */ | 
 | 		wlan = asus_wmi_get_devstate_simple(asus, ASUS_WMI_DEVID_WLAN); | 
 | 		asus_wmi_set_devstate(ASUS_WMI_DEVID_WLAN, wlan, NULL); | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int asus_hotk_resume(struct device *device) | 
 | { | 
 | 	struct asus_wmi *asus = dev_get_drvdata(device); | 
 |  | 
 | 	if (!IS_ERR_OR_NULL(asus->kbd_led.dev)) | 
 | 		kbd_led_update(asus); | 
 |  | 
 | 	if (asus_wmi_has_fnlock_key(asus)) | 
 | 		asus_wmi_fnlock_update(asus); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int asus_hotk_restore(struct device *device) | 
 | { | 
 | 	struct asus_wmi *asus = dev_get_drvdata(device); | 
 | 	int bl; | 
 |  | 
 | 	/* Refresh both wlan rfkill state and pci hotplug */ | 
 | 	if (asus->wlan.rfkill) | 
 | 		asus_rfkill_hotplug(asus); | 
 |  | 
 | 	if (asus->bluetooth.rfkill) { | 
 | 		bl = !asus_wmi_get_devstate_simple(asus, | 
 | 						   ASUS_WMI_DEVID_BLUETOOTH); | 
 | 		rfkill_set_sw_state(asus->bluetooth.rfkill, bl); | 
 | 	} | 
 | 	if (asus->wimax.rfkill) { | 
 | 		bl = !asus_wmi_get_devstate_simple(asus, ASUS_WMI_DEVID_WIMAX); | 
 | 		rfkill_set_sw_state(asus->wimax.rfkill, bl); | 
 | 	} | 
 | 	if (asus->wwan3g.rfkill) { | 
 | 		bl = !asus_wmi_get_devstate_simple(asus, ASUS_WMI_DEVID_WWAN3G); | 
 | 		rfkill_set_sw_state(asus->wwan3g.rfkill, bl); | 
 | 	} | 
 | 	if (asus->gps.rfkill) { | 
 | 		bl = !asus_wmi_get_devstate_simple(asus, ASUS_WMI_DEVID_GPS); | 
 | 		rfkill_set_sw_state(asus->gps.rfkill, bl); | 
 | 	} | 
 | 	if (asus->uwb.rfkill) { | 
 | 		bl = !asus_wmi_get_devstate_simple(asus, ASUS_WMI_DEVID_UWB); | 
 | 		rfkill_set_sw_state(asus->uwb.rfkill, bl); | 
 | 	} | 
 | 	if (!IS_ERR_OR_NULL(asus->kbd_led.dev)) | 
 | 		kbd_led_update(asus); | 
 |  | 
 | 	if (asus_wmi_has_fnlock_key(asus)) | 
 | 		asus_wmi_fnlock_update(asus); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static const struct dev_pm_ops asus_pm_ops = { | 
 | 	.thaw = asus_hotk_thaw, | 
 | 	.restore = asus_hotk_restore, | 
 | 	.resume = asus_hotk_resume, | 
 | }; | 
 |  | 
 | /* Registration ***************************************************************/ | 
 |  | 
 | static int asus_wmi_probe(struct platform_device *pdev) | 
 | { | 
 | 	struct platform_driver *pdrv = to_platform_driver(pdev->dev.driver); | 
 | 	struct asus_wmi_driver *wdrv = to_asus_wmi_driver(pdrv); | 
 | 	int ret; | 
 |  | 
 | 	if (!wmi_has_guid(ASUS_WMI_MGMT_GUID)) { | 
 | 		pr_warn("ASUS Management GUID not found\n"); | 
 | 		return -ENODEV; | 
 | 	} | 
 |  | 
 | 	if (wdrv->event_guid && !wmi_has_guid(wdrv->event_guid)) { | 
 | 		pr_warn("ASUS Event GUID not found\n"); | 
 | 		return -ENODEV; | 
 | 	} | 
 |  | 
 | 	if (wdrv->probe) { | 
 | 		ret = wdrv->probe(pdev); | 
 | 		if (ret) | 
 | 			return ret; | 
 | 	} | 
 |  | 
 | 	return asus_wmi_add(pdev); | 
 | } | 
 |  | 
 | static bool used; | 
 |  | 
 | int __init_or_module asus_wmi_register_driver(struct asus_wmi_driver *driver) | 
 | { | 
 | 	struct platform_driver *platform_driver; | 
 | 	struct platform_device *platform_device; | 
 |  | 
 | 	if (used) | 
 | 		return -EBUSY; | 
 |  | 
 | 	platform_driver = &driver->platform_driver; | 
 | 	platform_driver->remove = asus_wmi_remove; | 
 | 	platform_driver->driver.owner = driver->owner; | 
 | 	platform_driver->driver.name = driver->name; | 
 | 	platform_driver->driver.pm = &asus_pm_ops; | 
 |  | 
 | 	platform_device = platform_create_bundle(platform_driver, | 
 | 						 asus_wmi_probe, | 
 | 						 NULL, 0, NULL, 0); | 
 | 	if (IS_ERR(platform_device)) | 
 | 		return PTR_ERR(platform_device); | 
 |  | 
 | 	used = true; | 
 | 	return 0; | 
 | } | 
 | EXPORT_SYMBOL_GPL(asus_wmi_register_driver); | 
 |  | 
 | void asus_wmi_unregister_driver(struct asus_wmi_driver *driver) | 
 | { | 
 | 	platform_device_unregister(driver->platform_device); | 
 | 	platform_driver_unregister(&driver->platform_driver); | 
 | 	used = false; | 
 | } | 
 | EXPORT_SYMBOL_GPL(asus_wmi_unregister_driver); | 
 |  | 
 | static int __init asus_wmi_init(void) | 
 | { | 
 | 	pr_info("ASUS WMI generic driver loaded\n"); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void __exit asus_wmi_exit(void) | 
 | { | 
 | 	pr_info("ASUS WMI generic driver unloaded\n"); | 
 | } | 
 |  | 
 | module_init(asus_wmi_init); | 
 | module_exit(asus_wmi_exit); |