| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * Sony CXD2820R demodulator driver |
| * |
| * Copyright (C) 2010 Antti Palosaari <crope@iki.fi> |
| */ |
| |
| |
| #include "cxd2820r_priv.h" |
| |
| int cxd2820r_set_frontend_t2(struct dvb_frontend *fe) |
| { |
| struct cxd2820r_priv *priv = fe->demodulator_priv; |
| struct i2c_client *client = priv->client[0]; |
| struct dtv_frontend_properties *c = &fe->dtv_property_cache; |
| int ret, bw_i; |
| unsigned int utmp; |
| u32 if_frequency; |
| u8 buf[3], bw_param; |
| u8 bw_params1[][5] = { |
| { 0x1c, 0xb3, 0x33, 0x33, 0x33 }, /* 5 MHz */ |
| { 0x17, 0xea, 0xaa, 0xaa, 0xaa }, /* 6 MHz */ |
| { 0x14, 0x80, 0x00, 0x00, 0x00 }, /* 7 MHz */ |
| { 0x11, 0xf0, 0x00, 0x00, 0x00 }, /* 8 MHz */ |
| }; |
| struct reg_val_mask tab[] = { |
| { 0x00080, 0x02, 0xff }, |
| { 0x00081, 0x20, 0xff }, |
| { 0x00085, 0x07, 0xff }, |
| { 0x00088, 0x01, 0xff }, |
| { 0x02069, 0x01, 0xff }, |
| |
| { 0x0207f, 0x2a, 0xff }, |
| { 0x02082, 0x0a, 0xff }, |
| { 0x02083, 0x0a, 0xff }, |
| { 0x020cb, priv->if_agc_polarity << 6, 0x40 }, |
| { 0x02070, priv->ts_mode, 0xff }, |
| { 0x02071, !priv->ts_clk_inv << 6, 0x40 }, |
| { 0x020b5, priv->spec_inv << 4, 0x10 }, |
| { 0x02567, 0x07, 0x0f }, |
| { 0x02569, 0x03, 0x03 }, |
| { 0x02595, 0x1a, 0xff }, |
| { 0x02596, 0x50, 0xff }, |
| { 0x02a8c, 0x00, 0xff }, |
| { 0x02a8d, 0x34, 0xff }, |
| { 0x02a45, 0x06, 0x07 }, |
| { 0x03f10, 0x0d, 0xff }, |
| { 0x03f11, 0x02, 0xff }, |
| { 0x03f12, 0x01, 0xff }, |
| { 0x03f23, 0x2c, 0xff }, |
| { 0x03f51, 0x13, 0xff }, |
| { 0x03f52, 0x01, 0xff }, |
| { 0x03f53, 0x00, 0xff }, |
| { 0x027e6, 0x14, 0xff }, |
| { 0x02786, 0x02, 0x07 }, |
| { 0x02787, 0x40, 0xe0 }, |
| { 0x027ef, 0x10, 0x18 }, |
| }; |
| |
| dev_dbg(&client->dev, |
| "delivery_system=%d modulation=%d frequency=%u bandwidth_hz=%u inversion=%d stream_id=%u\n", |
| c->delivery_system, c->modulation, c->frequency, |
| c->bandwidth_hz, c->inversion, c->stream_id); |
| |
| switch (c->bandwidth_hz) { |
| case 5000000: |
| bw_i = 0; |
| bw_param = 3; |
| break; |
| case 6000000: |
| bw_i = 1; |
| bw_param = 2; |
| break; |
| case 7000000: |
| bw_i = 2; |
| bw_param = 1; |
| break; |
| case 8000000: |
| bw_i = 3; |
| bw_param = 0; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| /* program tuner */ |
| if (fe->ops.tuner_ops.set_params) |
| fe->ops.tuner_ops.set_params(fe); |
| |
| if (priv->delivery_system != SYS_DVBT2) { |
| ret = cxd2820r_wr_reg_val_mask_tab(priv, tab, ARRAY_SIZE(tab)); |
| if (ret) |
| goto error; |
| } |
| |
| priv->delivery_system = SYS_DVBT2; |
| |
| /* program IF frequency */ |
| if (fe->ops.tuner_ops.get_if_frequency) { |
| ret = fe->ops.tuner_ops.get_if_frequency(fe, &if_frequency); |
| if (ret) |
| goto error; |
| dev_dbg(&client->dev, "if_frequency=%u\n", if_frequency); |
| } else { |
| ret = -EINVAL; |
| goto error; |
| } |
| |
| utmp = DIV_ROUND_CLOSEST_ULL((u64)if_frequency * 0x1000000, CXD2820R_CLK); |
| buf[0] = (utmp >> 16) & 0xff; |
| buf[1] = (utmp >> 8) & 0xff; |
| buf[2] = (utmp >> 0) & 0xff; |
| ret = regmap_bulk_write(priv->regmap[0], 0x20b6, buf, 3); |
| if (ret) |
| goto error; |
| |
| /* PLP filtering */ |
| if (c->stream_id > 255) { |
| dev_dbg(&client->dev, "disable PLP filtering\n"); |
| ret = regmap_write(priv->regmap[0], 0x23ad, 0x00); |
| if (ret) |
| goto error; |
| } else { |
| dev_dbg(&client->dev, "enable PLP filtering\n"); |
| ret = regmap_write(priv->regmap[0], 0x23af, c->stream_id & 0xff); |
| if (ret) |
| goto error; |
| ret = regmap_write(priv->regmap[0], 0x23ad, 0x01); |
| if (ret) |
| goto error; |
| } |
| |
| ret = regmap_bulk_write(priv->regmap[0], 0x209f, bw_params1[bw_i], 5); |
| if (ret) |
| goto error; |
| |
| ret = regmap_update_bits(priv->regmap[0], 0x20d7, 0xc0, bw_param << 6); |
| if (ret) |
| goto error; |
| |
| ret = regmap_write(priv->regmap[0], 0x00ff, 0x08); |
| if (ret) |
| goto error; |
| |
| ret = regmap_write(priv->regmap[0], 0x00fe, 0x01); |
| if (ret) |
| goto error; |
| |
| return ret; |
| error: |
| dev_dbg(&client->dev, "failed=%d\n", ret); |
| return ret; |
| |
| } |
| |
| int cxd2820r_get_frontend_t2(struct dvb_frontend *fe, |
| struct dtv_frontend_properties *c) |
| { |
| struct cxd2820r_priv *priv = fe->demodulator_priv; |
| struct i2c_client *client = priv->client[0]; |
| int ret; |
| unsigned int utmp; |
| u8 buf[2]; |
| |
| dev_dbg(&client->dev, "\n"); |
| |
| ret = regmap_bulk_read(priv->regmap[0], 0x205c, buf, 2); |
| if (ret) |
| goto error; |
| |
| switch ((buf[0] >> 0) & 0x07) { |
| case 0: |
| c->transmission_mode = TRANSMISSION_MODE_2K; |
| break; |
| case 1: |
| c->transmission_mode = TRANSMISSION_MODE_8K; |
| break; |
| case 2: |
| c->transmission_mode = TRANSMISSION_MODE_4K; |
| break; |
| case 3: |
| c->transmission_mode = TRANSMISSION_MODE_1K; |
| break; |
| case 4: |
| c->transmission_mode = TRANSMISSION_MODE_16K; |
| break; |
| case 5: |
| c->transmission_mode = TRANSMISSION_MODE_32K; |
| break; |
| } |
| |
| switch ((buf[1] >> 4) & 0x07) { |
| case 0: |
| c->guard_interval = GUARD_INTERVAL_1_32; |
| break; |
| case 1: |
| c->guard_interval = GUARD_INTERVAL_1_16; |
| break; |
| case 2: |
| c->guard_interval = GUARD_INTERVAL_1_8; |
| break; |
| case 3: |
| c->guard_interval = GUARD_INTERVAL_1_4; |
| break; |
| case 4: |
| c->guard_interval = GUARD_INTERVAL_1_128; |
| break; |
| case 5: |
| c->guard_interval = GUARD_INTERVAL_19_128; |
| break; |
| case 6: |
| c->guard_interval = GUARD_INTERVAL_19_256; |
| break; |
| } |
| |
| ret = regmap_bulk_read(priv->regmap[0], 0x225b, buf, 2); |
| if (ret) |
| goto error; |
| |
| switch ((buf[0] >> 0) & 0x07) { |
| case 0: |
| c->fec_inner = FEC_1_2; |
| break; |
| case 1: |
| c->fec_inner = FEC_3_5; |
| break; |
| case 2: |
| c->fec_inner = FEC_2_3; |
| break; |
| case 3: |
| c->fec_inner = FEC_3_4; |
| break; |
| case 4: |
| c->fec_inner = FEC_4_5; |
| break; |
| case 5: |
| c->fec_inner = FEC_5_6; |
| break; |
| } |
| |
| switch ((buf[1] >> 0) & 0x07) { |
| case 0: |
| c->modulation = QPSK; |
| break; |
| case 1: |
| c->modulation = QAM_16; |
| break; |
| case 2: |
| c->modulation = QAM_64; |
| break; |
| case 3: |
| c->modulation = QAM_256; |
| break; |
| } |
| |
| ret = regmap_read(priv->regmap[0], 0x20b5, &utmp); |
| if (ret) |
| goto error; |
| |
| switch ((utmp >> 4) & 0x01) { |
| case 0: |
| c->inversion = INVERSION_OFF; |
| break; |
| case 1: |
| c->inversion = INVERSION_ON; |
| break; |
| } |
| |
| return ret; |
| error: |
| dev_dbg(&client->dev, "failed=%d\n", ret); |
| return ret; |
| } |
| |
| int cxd2820r_read_status_t2(struct dvb_frontend *fe, enum fe_status *status) |
| { |
| struct cxd2820r_priv *priv = fe->demodulator_priv; |
| struct dtv_frontend_properties *c = &fe->dtv_property_cache; |
| struct i2c_client *client = priv->client[0]; |
| int ret; |
| unsigned int utmp, utmp1, utmp2; |
| u8 buf[4]; |
| |
| /* Lock detection */ |
| ret = regmap_bulk_read(priv->regmap[0], 0x2010, &buf[0], 1); |
| if (ret) |
| goto error; |
| |
| utmp1 = (buf[0] >> 0) & 0x07; |
| utmp2 = (buf[0] >> 5) & 0x01; |
| |
| if (utmp1 == 6 && utmp2 == 1) { |
| *status = FE_HAS_SIGNAL | FE_HAS_CARRIER | |
| FE_HAS_VITERBI | FE_HAS_SYNC | FE_HAS_LOCK; |
| } else if (utmp1 == 6 || utmp2 == 1) { |
| *status = FE_HAS_SIGNAL | FE_HAS_CARRIER | |
| FE_HAS_VITERBI | FE_HAS_SYNC; |
| } else { |
| *status = 0; |
| } |
| |
| dev_dbg(&client->dev, "status=%02x raw=%*ph sync=%u ts=%u\n", |
| *status, 1, buf, utmp1, utmp2); |
| |
| /* Signal strength */ |
| if (*status & FE_HAS_SIGNAL) { |
| unsigned int strength; |
| |
| ret = regmap_bulk_read(priv->regmap[0], 0x2026, buf, 2); |
| if (ret) |
| goto error; |
| |
| utmp = buf[0] << 8 | buf[1] << 0; |
| utmp = ~utmp & 0x0fff; |
| /* Scale value to 0x0000-0xffff */ |
| strength = utmp << 4 | utmp >> 8; |
| |
| c->strength.len = 1; |
| c->strength.stat[0].scale = FE_SCALE_RELATIVE; |
| c->strength.stat[0].uvalue = strength; |
| } else { |
| c->strength.len = 1; |
| c->strength.stat[0].scale = FE_SCALE_NOT_AVAILABLE; |
| } |
| |
| /* CNR */ |
| if (*status & FE_HAS_VITERBI) { |
| unsigned int cnr; |
| |
| ret = regmap_bulk_read(priv->regmap[0], 0x2028, buf, 2); |
| if (ret) |
| goto error; |
| |
| utmp = buf[0] << 8 | buf[1] << 0; |
| utmp = utmp & 0x0fff; |
| #define CXD2820R_LOG10_8_24 15151336 /* log10(8) << 24 */ |
| if (utmp) |
| cnr = div_u64((u64)(intlog10(utmp) |
| - CXD2820R_LOG10_8_24) * 10000, |
| (1 << 24)); |
| else |
| cnr = 0; |
| |
| c->cnr.len = 1; |
| c->cnr.stat[0].scale = FE_SCALE_DECIBEL; |
| c->cnr.stat[0].svalue = cnr; |
| } else { |
| c->cnr.len = 1; |
| c->cnr.stat[0].scale = FE_SCALE_NOT_AVAILABLE; |
| } |
| |
| /* BER */ |
| if (*status & FE_HAS_SYNC) { |
| unsigned int post_bit_error; |
| |
| ret = regmap_bulk_read(priv->regmap[0], 0x2039, buf, 4); |
| if (ret) |
| goto error; |
| |
| if ((buf[0] >> 4) & 0x01) { |
| post_bit_error = buf[0] << 24 | buf[1] << 16 | |
| buf[2] << 8 | buf[3] << 0; |
| post_bit_error &= 0x0fffffff; |
| } else { |
| post_bit_error = 0; |
| } |
| |
| priv->post_bit_error += post_bit_error; |
| |
| c->post_bit_error.len = 1; |
| c->post_bit_error.stat[0].scale = FE_SCALE_COUNTER; |
| c->post_bit_error.stat[0].uvalue = priv->post_bit_error; |
| } else { |
| c->post_bit_error.len = 1; |
| c->post_bit_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE; |
| } |
| |
| return ret; |
| error: |
| dev_dbg(&client->dev, "failed=%d\n", ret); |
| return ret; |
| } |
| |
| int cxd2820r_sleep_t2(struct dvb_frontend *fe) |
| { |
| struct cxd2820r_priv *priv = fe->demodulator_priv; |
| struct i2c_client *client = priv->client[0]; |
| int ret; |
| static const struct reg_val_mask tab[] = { |
| { 0x000ff, 0x1f, 0xff }, |
| { 0x00085, 0x00, 0xff }, |
| { 0x00088, 0x01, 0xff }, |
| { 0x02069, 0x00, 0xff }, |
| { 0x00081, 0x00, 0xff }, |
| { 0x00080, 0x00, 0xff }, |
| }; |
| |
| dev_dbg(&client->dev, "\n"); |
| |
| ret = cxd2820r_wr_reg_val_mask_tab(priv, tab, ARRAY_SIZE(tab)); |
| if (ret) |
| goto error; |
| |
| priv->delivery_system = SYS_UNDEFINED; |
| |
| return ret; |
| error: |
| dev_dbg(&client->dev, "failed=%d\n", ret); |
| return ret; |
| } |
| |
| int cxd2820r_get_tune_settings_t2(struct dvb_frontend *fe, |
| struct dvb_frontend_tune_settings *s) |
| { |
| s->min_delay_ms = 1500; |
| s->step_size = fe->ops.info.frequency_stepsize_hz * 2; |
| s->max_drift = (fe->ops.info.frequency_stepsize_hz * 2) + 1; |
| |
| return 0; |
| } |