| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Macintosh Nubus Interface Code |
| * |
| * Originally by Alan Cox |
| * |
| * Mostly rewritten by David Huggins-Daines, C. Scott Ananian, |
| * and others. |
| */ |
| |
| #include <linux/types.h> |
| #include <linux/kernel.h> |
| #include <linux/string.h> |
| #include <linux/nubus.h> |
| #include <linux/errno.h> |
| #include <linux/init.h> |
| #include <linux/module.h> |
| #include <linux/seq_file.h> |
| #include <linux/slab.h> |
| #include <asm/setup.h> |
| #include <asm/page.h> |
| #include <asm/hwtest.h> |
| |
| /* Constants */ |
| |
| /* This is, of course, the size in bytelanes, rather than the size in |
| actual bytes */ |
| #define FORMAT_BLOCK_SIZE 20 |
| #define ROM_DIR_OFFSET 0x24 |
| |
| #define NUBUS_TEST_PATTERN 0x5A932BC7 |
| |
| /* Globals */ |
| |
| struct nubus_rsrc *nubus_func_rsrcs; |
| struct nubus_board *nubus_boards; |
| |
| /* Meaning of "bytelanes": |
| |
| The card ROM may appear on any or all bytes of each long word in |
| NuBus memory. The low 4 bits of the "map" value found in the |
| format block (at the top of the slot address space, as well as at |
| the top of the MacOS ROM) tells us which bytelanes, i.e. which byte |
| offsets within each longword, are valid. Thus: |
| |
| A map of 0x0f, as found in the MacOS ROM, means that all bytelanes |
| are valid. |
| |
| A map of 0xf0 means that no bytelanes are valid (We pray that we |
| will never encounter this, but stranger things have happened) |
| |
| A map of 0xe1 means that only the MSB of each long word is actually |
| part of the card ROM. (We hope to never encounter NuBus on a |
| little-endian machine. Again, stranger things have happened) |
| |
| A map of 0x78 means that only the LSB of each long word is valid. |
| |
| Etcetera, etcetera. Hopefully this clears up some confusion over |
| what the following code actually does. */ |
| |
| static inline int not_useful(void *p, int map) |
| { |
| unsigned long pv = (unsigned long)p; |
| |
| pv &= 3; |
| if (map & (1 << pv)) |
| return 0; |
| return 1; |
| } |
| |
| static unsigned long nubus_get_rom(unsigned char **ptr, int len, int map) |
| { |
| /* This will hold the result */ |
| unsigned long v = 0; |
| unsigned char *p = *ptr; |
| |
| while (len) { |
| v <<= 8; |
| while (not_useful(p, map)) |
| p++; |
| v |= *p++; |
| len--; |
| } |
| *ptr = p; |
| return v; |
| } |
| |
| static void nubus_rewind(unsigned char **ptr, int len, int map) |
| { |
| unsigned char *p = *ptr; |
| |
| while (len) { |
| do { |
| p--; |
| } while (not_useful(p, map)); |
| len--; |
| } |
| *ptr = p; |
| } |
| |
| static void nubus_advance(unsigned char **ptr, int len, int map) |
| { |
| unsigned char *p = *ptr; |
| |
| while (len) { |
| while (not_useful(p, map)) |
| p++; |
| p++; |
| len--; |
| } |
| *ptr = p; |
| } |
| |
| static void nubus_move(unsigned char **ptr, int len, int map) |
| { |
| unsigned long slot_space = (unsigned long)*ptr & 0xFF000000; |
| |
| if (len > 0) |
| nubus_advance(ptr, len, map); |
| else if (len < 0) |
| nubus_rewind(ptr, -len, map); |
| |
| if (((unsigned long)*ptr & 0xFF000000) != slot_space) |
| pr_err("%s: moved out of slot address space!\n", __func__); |
| } |
| |
| /* Now, functions to read the sResource tree */ |
| |
| /* Each sResource entry consists of a 1-byte ID and a 3-byte data |
| field. If that data field contains an offset, then obviously we |
| have to expand it from a 24-bit signed number to a 32-bit signed |
| number. */ |
| |
| static inline long nubus_expand32(long foo) |
| { |
| if (foo & 0x00800000) /* 24bit negative */ |
| foo |= 0xFF000000; |
| return foo; |
| } |
| |
| static inline void *nubus_rom_addr(int slot) |
| { |
| /* |
| * Returns the first byte after the card. We then walk |
| * backwards to get the lane register and the config |
| */ |
| return (void *)(0xF1000000 + (slot << 24)); |
| } |
| |
| unsigned char *nubus_dirptr(const struct nubus_dirent *nd) |
| { |
| unsigned char *p = nd->base; |
| |
| /* Essentially, just step over the bytelanes using whatever |
| offset we might have found */ |
| nubus_move(&p, nubus_expand32(nd->data), nd->mask); |
| /* And return the value */ |
| return p; |
| } |
| |
| /* These two are for pulling resource data blocks (i.e. stuff that's |
| pointed to with offsets) out of the card ROM. */ |
| |
| void nubus_get_rsrc_mem(void *dest, const struct nubus_dirent *dirent, |
| unsigned int len) |
| { |
| unsigned char *t = (unsigned char *)dest; |
| unsigned char *p = nubus_dirptr(dirent); |
| |
| while (len) { |
| *t++ = nubus_get_rom(&p, 1, dirent->mask); |
| len--; |
| } |
| } |
| EXPORT_SYMBOL(nubus_get_rsrc_mem); |
| |
| unsigned int nubus_get_rsrc_str(char *dest, const struct nubus_dirent *dirent, |
| unsigned int len) |
| { |
| char *t = dest; |
| unsigned char *p = nubus_dirptr(dirent); |
| |
| while (len > 1) { |
| unsigned char c = nubus_get_rom(&p, 1, dirent->mask); |
| |
| if (!c) |
| break; |
| *t++ = c; |
| len--; |
| } |
| if (len > 0) |
| *t = '\0'; |
| return t - dest; |
| } |
| EXPORT_SYMBOL(nubus_get_rsrc_str); |
| |
| void nubus_seq_write_rsrc_mem(struct seq_file *m, |
| const struct nubus_dirent *dirent, |
| unsigned int len) |
| { |
| unsigned long buf[32]; |
| unsigned int buf_size = sizeof(buf); |
| unsigned char *p = nubus_dirptr(dirent); |
| |
| /* If possible, write out full buffers */ |
| while (len >= buf_size) { |
| unsigned int i; |
| |
| for (i = 0; i < ARRAY_SIZE(buf); i++) |
| buf[i] = nubus_get_rom(&p, sizeof(buf[0]), |
| dirent->mask); |
| seq_write(m, buf, buf_size); |
| len -= buf_size; |
| } |
| /* If not, write out individual bytes */ |
| while (len--) |
| seq_putc(m, nubus_get_rom(&p, 1, dirent->mask)); |
| } |
| |
| int nubus_get_root_dir(const struct nubus_board *board, |
| struct nubus_dir *dir) |
| { |
| dir->ptr = dir->base = board->directory; |
| dir->done = 0; |
| dir->mask = board->lanes; |
| return 0; |
| } |
| EXPORT_SYMBOL(nubus_get_root_dir); |
| |
| /* This is a slyly renamed version of the above */ |
| int nubus_get_func_dir(const struct nubus_rsrc *fres, struct nubus_dir *dir) |
| { |
| dir->ptr = dir->base = fres->directory; |
| dir->done = 0; |
| dir->mask = fres->board->lanes; |
| return 0; |
| } |
| EXPORT_SYMBOL(nubus_get_func_dir); |
| |
| int nubus_get_board_dir(const struct nubus_board *board, |
| struct nubus_dir *dir) |
| { |
| struct nubus_dirent ent; |
| |
| dir->ptr = dir->base = board->directory; |
| dir->done = 0; |
| dir->mask = board->lanes; |
| |
| /* Now dereference it (the first directory is always the board |
| directory) */ |
| if (nubus_readdir(dir, &ent) == -1) |
| return -1; |
| if (nubus_get_subdir(&ent, dir) == -1) |
| return -1; |
| return 0; |
| } |
| EXPORT_SYMBOL(nubus_get_board_dir); |
| |
| int nubus_get_subdir(const struct nubus_dirent *ent, |
| struct nubus_dir *dir) |
| { |
| dir->ptr = dir->base = nubus_dirptr(ent); |
| dir->done = 0; |
| dir->mask = ent->mask; |
| return 0; |
| } |
| EXPORT_SYMBOL(nubus_get_subdir); |
| |
| int nubus_readdir(struct nubus_dir *nd, struct nubus_dirent *ent) |
| { |
| u32 resid; |
| |
| if (nd->done) |
| return -1; |
| |
| /* Do this first, otherwise nubus_rewind & co are off by 4 */ |
| ent->base = nd->ptr; |
| |
| /* This moves nd->ptr forward */ |
| resid = nubus_get_rom(&nd->ptr, 4, nd->mask); |
| |
| /* EOL marker, as per the Apple docs */ |
| if ((resid & 0xff000000) == 0xff000000) { |
| /* Mark it as done */ |
| nd->done = 1; |
| return -1; |
| } |
| |
| /* First byte is the resource ID */ |
| ent->type = resid >> 24; |
| /* Low 3 bytes might contain data (or might not) */ |
| ent->data = resid & 0xffffff; |
| ent->mask = nd->mask; |
| return 0; |
| } |
| EXPORT_SYMBOL(nubus_readdir); |
| |
| int nubus_rewinddir(struct nubus_dir *dir) |
| { |
| dir->ptr = dir->base; |
| dir->done = 0; |
| return 0; |
| } |
| EXPORT_SYMBOL(nubus_rewinddir); |
| |
| /* Driver interface functions, more or less like in pci.c */ |
| |
| struct nubus_rsrc *nubus_find_type(unsigned short category, unsigned short type, |
| const struct nubus_rsrc *from) |
| { |
| struct nubus_rsrc *itor = from ? from->next : nubus_func_rsrcs; |
| |
| while (itor) { |
| if (itor->category == category && itor->type == type) |
| return itor; |
| itor = itor->next; |
| } |
| return NULL; |
| } |
| EXPORT_SYMBOL(nubus_find_type); |
| |
| struct nubus_rsrc *nubus_find_slot(unsigned int slot, |
| const struct nubus_rsrc *from) |
| { |
| struct nubus_rsrc *itor = from ? from->next : nubus_func_rsrcs; |
| |
| while (itor) { |
| if (itor->board->slot == slot) |
| return itor; |
| itor = itor->next; |
| } |
| return NULL; |
| } |
| EXPORT_SYMBOL(nubus_find_slot); |
| |
| int |
| nubus_find_rsrc(struct nubus_dir *dir, unsigned char rsrc_type, |
| struct nubus_dirent *ent) |
| { |
| while (nubus_readdir(dir, ent) != -1) { |
| if (ent->type == rsrc_type) |
| return 0; |
| } |
| return -1; |
| } |
| EXPORT_SYMBOL(nubus_find_rsrc); |
| |
| /* Initialization functions - decide which slots contain stuff worth |
| looking at, and print out lots and lots of information from the |
| resource blocks. */ |
| |
| static int __init nubus_get_block_rsrc_dir(struct nubus_board *board, |
| struct proc_dir_entry *procdir, |
| const struct nubus_dirent *parent) |
| { |
| struct nubus_dir dir; |
| struct nubus_dirent ent; |
| |
| nubus_get_subdir(parent, &dir); |
| dir.procdir = nubus_proc_add_rsrc_dir(procdir, parent, board); |
| |
| while (nubus_readdir(&dir, &ent) != -1) { |
| u32 size; |
| |
| nubus_get_rsrc_mem(&size, &ent, 4); |
| pr_debug(" block (0x%x), size %d\n", ent.type, size); |
| nubus_proc_add_rsrc_mem(dir.procdir, &ent, size); |
| } |
| return 0; |
| } |
| |
| static int __init nubus_get_display_vidmode(struct nubus_board *board, |
| struct proc_dir_entry *procdir, |
| const struct nubus_dirent *parent) |
| { |
| struct nubus_dir dir; |
| struct nubus_dirent ent; |
| |
| nubus_get_subdir(parent, &dir); |
| dir.procdir = nubus_proc_add_rsrc_dir(procdir, parent, board); |
| |
| while (nubus_readdir(&dir, &ent) != -1) { |
| switch (ent.type) { |
| case 1: /* mVidParams */ |
| case 2: /* mTable */ |
| { |
| u32 size; |
| |
| nubus_get_rsrc_mem(&size, &ent, 4); |
| pr_debug(" block (0x%x), size %d\n", ent.type, |
| size); |
| nubus_proc_add_rsrc_mem(dir.procdir, &ent, size); |
| break; |
| } |
| default: |
| pr_debug(" unknown resource 0x%02x, data 0x%06x\n", |
| ent.type, ent.data); |
| nubus_proc_add_rsrc_mem(dir.procdir, &ent, 0); |
| } |
| } |
| return 0; |
| } |
| |
| static int __init nubus_get_display_resource(struct nubus_rsrc *fres, |
| struct proc_dir_entry *procdir, |
| const struct nubus_dirent *ent) |
| { |
| switch (ent->type) { |
| case NUBUS_RESID_GAMMADIR: |
| pr_debug(" gamma directory offset: 0x%06x\n", ent->data); |
| nubus_get_block_rsrc_dir(fres->board, procdir, ent); |
| break; |
| case 0x0080 ... 0x0085: |
| pr_debug(" mode 0x%02x info offset: 0x%06x\n", |
| ent->type, ent->data); |
| nubus_get_display_vidmode(fres->board, procdir, ent); |
| break; |
| default: |
| pr_debug(" unknown resource 0x%02x, data 0x%06x\n", |
| ent->type, ent->data); |
| nubus_proc_add_rsrc_mem(procdir, ent, 0); |
| } |
| return 0; |
| } |
| |
| static int __init nubus_get_network_resource(struct nubus_rsrc *fres, |
| struct proc_dir_entry *procdir, |
| const struct nubus_dirent *ent) |
| { |
| switch (ent->type) { |
| case NUBUS_RESID_MAC_ADDRESS: |
| { |
| char addr[6]; |
| |
| nubus_get_rsrc_mem(addr, ent, 6); |
| pr_debug(" MAC address: %pM\n", addr); |
| nubus_proc_add_rsrc_mem(procdir, ent, 6); |
| break; |
| } |
| default: |
| pr_debug(" unknown resource 0x%02x, data 0x%06x\n", |
| ent->type, ent->data); |
| nubus_proc_add_rsrc_mem(procdir, ent, 0); |
| } |
| return 0; |
| } |
| |
| static int __init nubus_get_cpu_resource(struct nubus_rsrc *fres, |
| struct proc_dir_entry *procdir, |
| const struct nubus_dirent *ent) |
| { |
| switch (ent->type) { |
| case NUBUS_RESID_MEMINFO: |
| { |
| unsigned long meminfo[2]; |
| |
| nubus_get_rsrc_mem(&meminfo, ent, 8); |
| pr_debug(" memory: [ 0x%08lx 0x%08lx ]\n", |
| meminfo[0], meminfo[1]); |
| nubus_proc_add_rsrc_mem(procdir, ent, 8); |
| break; |
| } |
| case NUBUS_RESID_ROMINFO: |
| { |
| unsigned long rominfo[2]; |
| |
| nubus_get_rsrc_mem(&rominfo, ent, 8); |
| pr_debug(" ROM: [ 0x%08lx 0x%08lx ]\n", |
| rominfo[0], rominfo[1]); |
| nubus_proc_add_rsrc_mem(procdir, ent, 8); |
| break; |
| } |
| default: |
| pr_debug(" unknown resource 0x%02x, data 0x%06x\n", |
| ent->type, ent->data); |
| nubus_proc_add_rsrc_mem(procdir, ent, 0); |
| } |
| return 0; |
| } |
| |
| static int __init nubus_get_private_resource(struct nubus_rsrc *fres, |
| struct proc_dir_entry *procdir, |
| const struct nubus_dirent *ent) |
| { |
| switch (fres->category) { |
| case NUBUS_CAT_DISPLAY: |
| nubus_get_display_resource(fres, procdir, ent); |
| break; |
| case NUBUS_CAT_NETWORK: |
| nubus_get_network_resource(fres, procdir, ent); |
| break; |
| case NUBUS_CAT_CPU: |
| nubus_get_cpu_resource(fres, procdir, ent); |
| break; |
| default: |
| pr_debug(" unknown resource 0x%02x, data 0x%06x\n", |
| ent->type, ent->data); |
| nubus_proc_add_rsrc_mem(procdir, ent, 0); |
| } |
| return 0; |
| } |
| |
| static struct nubus_rsrc * __init |
| nubus_get_functional_resource(struct nubus_board *board, int slot, |
| const struct nubus_dirent *parent) |
| { |
| struct nubus_dir dir; |
| struct nubus_dirent ent; |
| struct nubus_rsrc *fres; |
| |
| pr_debug(" Functional resource 0x%02x:\n", parent->type); |
| nubus_get_subdir(parent, &dir); |
| dir.procdir = nubus_proc_add_rsrc_dir(board->procdir, parent, board); |
| |
| /* Actually we should probably panic if this fails */ |
| fres = kzalloc(sizeof(*fres), GFP_ATOMIC); |
| if (!fres) |
| return NULL; |
| fres->resid = parent->type; |
| fres->directory = dir.base; |
| fres->board = board; |
| |
| while (nubus_readdir(&dir, &ent) != -1) { |
| switch (ent.type) { |
| case NUBUS_RESID_TYPE: |
| { |
| unsigned short nbtdata[4]; |
| |
| nubus_get_rsrc_mem(nbtdata, &ent, 8); |
| fres->category = nbtdata[0]; |
| fres->type = nbtdata[1]; |
| fres->dr_sw = nbtdata[2]; |
| fres->dr_hw = nbtdata[3]; |
| pr_debug(" type: [cat 0x%x type 0x%x sw 0x%x hw 0x%x]\n", |
| nbtdata[0], nbtdata[1], nbtdata[2], nbtdata[3]); |
| nubus_proc_add_rsrc_mem(dir.procdir, &ent, 8); |
| break; |
| } |
| case NUBUS_RESID_NAME: |
| { |
| char name[64]; |
| unsigned int len; |
| |
| len = nubus_get_rsrc_str(name, &ent, sizeof(name)); |
| pr_debug(" name: %s\n", name); |
| nubus_proc_add_rsrc_mem(dir.procdir, &ent, len + 1); |
| break; |
| } |
| case NUBUS_RESID_DRVRDIR: |
| { |
| /* MacOS driver. If we were NetBSD we might |
| use this :-) */ |
| pr_debug(" driver directory offset: 0x%06x\n", |
| ent.data); |
| nubus_get_block_rsrc_dir(board, dir.procdir, &ent); |
| break; |
| } |
| case NUBUS_RESID_MINOR_BASEOS: |
| { |
| /* We will need this in order to support |
| multiple framebuffers. It might be handy |
| for Ethernet as well */ |
| u32 base_offset; |
| |
| nubus_get_rsrc_mem(&base_offset, &ent, 4); |
| pr_debug(" memory offset: 0x%08x\n", base_offset); |
| nubus_proc_add_rsrc_mem(dir.procdir, &ent, 4); |
| break; |
| } |
| case NUBUS_RESID_MINOR_LENGTH: |
| { |
| /* Ditto */ |
| u32 length; |
| |
| nubus_get_rsrc_mem(&length, &ent, 4); |
| pr_debug(" memory length: 0x%08x\n", length); |
| nubus_proc_add_rsrc_mem(dir.procdir, &ent, 4); |
| break; |
| } |
| case NUBUS_RESID_FLAGS: |
| pr_debug(" flags: 0x%06x\n", ent.data); |
| nubus_proc_add_rsrc(dir.procdir, &ent); |
| break; |
| case NUBUS_RESID_HWDEVID: |
| pr_debug(" hwdevid: 0x%06x\n", ent.data); |
| nubus_proc_add_rsrc(dir.procdir, &ent); |
| break; |
| default: |
| /* Local/Private resources have their own |
| function */ |
| nubus_get_private_resource(fres, dir.procdir, &ent); |
| } |
| } |
| |
| return fres; |
| } |
| |
| /* This is *really* cool. */ |
| static int __init nubus_get_icon(struct nubus_board *board, |
| struct proc_dir_entry *procdir, |
| const struct nubus_dirent *ent) |
| { |
| /* Should be 32x32 if my memory serves me correctly */ |
| u32 icon[32]; |
| int i; |
| |
| nubus_get_rsrc_mem(&icon, ent, 128); |
| pr_debug(" icon:\n"); |
| for (i = 0; i < 8; i++) |
| pr_debug(" %08x %08x %08x %08x\n", |
| icon[i * 4 + 0], icon[i * 4 + 1], |
| icon[i * 4 + 2], icon[i * 4 + 3]); |
| nubus_proc_add_rsrc_mem(procdir, ent, 128); |
| |
| return 0; |
| } |
| |
| static int __init nubus_get_vendorinfo(struct nubus_board *board, |
| struct proc_dir_entry *procdir, |
| const struct nubus_dirent *parent) |
| { |
| struct nubus_dir dir; |
| struct nubus_dirent ent; |
| static char *vendor_fields[6] = { "ID", "serial", "revision", |
| "part", "date", "unknown field" }; |
| |
| pr_debug(" vendor info:\n"); |
| nubus_get_subdir(parent, &dir); |
| dir.procdir = nubus_proc_add_rsrc_dir(procdir, parent, board); |
| |
| while (nubus_readdir(&dir, &ent) != -1) { |
| char name[64]; |
| unsigned int len; |
| |
| /* These are all strings, we think */ |
| len = nubus_get_rsrc_str(name, &ent, sizeof(name)); |
| if (ent.type < 1 || ent.type > 5) |
| ent.type = 5; |
| pr_debug(" %s: %s\n", vendor_fields[ent.type - 1], name); |
| nubus_proc_add_rsrc_mem(dir.procdir, &ent, len + 1); |
| } |
| return 0; |
| } |
| |
| static int __init nubus_get_board_resource(struct nubus_board *board, int slot, |
| const struct nubus_dirent *parent) |
| { |
| struct nubus_dir dir; |
| struct nubus_dirent ent; |
| |
| pr_debug(" Board resource 0x%02x:\n", parent->type); |
| nubus_get_subdir(parent, &dir); |
| dir.procdir = nubus_proc_add_rsrc_dir(board->procdir, parent, board); |
| |
| while (nubus_readdir(&dir, &ent) != -1) { |
| switch (ent.type) { |
| case NUBUS_RESID_TYPE: |
| { |
| unsigned short nbtdata[4]; |
| /* This type is always the same, and is not |
| useful except insofar as it tells us that |
| we really are looking at a board resource. */ |
| nubus_get_rsrc_mem(nbtdata, &ent, 8); |
| pr_debug(" type: [cat 0x%x type 0x%x sw 0x%x hw 0x%x]\n", |
| nbtdata[0], nbtdata[1], nbtdata[2], nbtdata[3]); |
| if (nbtdata[0] != 1 || nbtdata[1] != 0 || |
| nbtdata[2] != 0 || nbtdata[3] != 0) |
| pr_err("Slot %X: sResource is not a board resource!\n", |
| slot); |
| nubus_proc_add_rsrc_mem(dir.procdir, &ent, 8); |
| break; |
| } |
| case NUBUS_RESID_NAME: |
| { |
| unsigned int len; |
| |
| len = nubus_get_rsrc_str(board->name, &ent, |
| sizeof(board->name)); |
| pr_debug(" name: %s\n", board->name); |
| nubus_proc_add_rsrc_mem(dir.procdir, &ent, len + 1); |
| break; |
| } |
| case NUBUS_RESID_ICON: |
| nubus_get_icon(board, dir.procdir, &ent); |
| break; |
| case NUBUS_RESID_BOARDID: |
| pr_debug(" board id: 0x%x\n", ent.data); |
| nubus_proc_add_rsrc(dir.procdir, &ent); |
| break; |
| case NUBUS_RESID_PRIMARYINIT: |
| pr_debug(" primary init offset: 0x%06x\n", ent.data); |
| nubus_proc_add_rsrc(dir.procdir, &ent); |
| break; |
| case NUBUS_RESID_VENDORINFO: |
| nubus_get_vendorinfo(board, dir.procdir, &ent); |
| break; |
| case NUBUS_RESID_FLAGS: |
| pr_debug(" flags: 0x%06x\n", ent.data); |
| nubus_proc_add_rsrc(dir.procdir, &ent); |
| break; |
| case NUBUS_RESID_HWDEVID: |
| pr_debug(" hwdevid: 0x%06x\n", ent.data); |
| nubus_proc_add_rsrc(dir.procdir, &ent); |
| break; |
| case NUBUS_RESID_SECONDINIT: |
| pr_debug(" secondary init offset: 0x%06x\n", |
| ent.data); |
| nubus_proc_add_rsrc(dir.procdir, &ent); |
| break; |
| /* WTF isn't this in the functional resources? */ |
| case NUBUS_RESID_VIDNAMES: |
| pr_debug(" vidnames directory offset: 0x%06x\n", |
| ent.data); |
| nubus_get_block_rsrc_dir(board, dir.procdir, &ent); |
| break; |
| /* Same goes for this */ |
| case NUBUS_RESID_VIDMODES: |
| pr_debug(" video mode parameter directory offset: 0x%06x\n", |
| ent.data); |
| nubus_proc_add_rsrc(dir.procdir, &ent); |
| break; |
| default: |
| pr_debug(" unknown resource 0x%02x, data 0x%06x\n", |
| ent.type, ent.data); |
| nubus_proc_add_rsrc_mem(dir.procdir, &ent, 0); |
| } |
| } |
| return 0; |
| } |
| |
| static struct nubus_board * __init nubus_add_board(int slot, int bytelanes) |
| { |
| struct nubus_board *board; |
| struct nubus_board **boardp; |
| unsigned char *rp; |
| unsigned long dpat; |
| struct nubus_dir dir; |
| struct nubus_dirent ent; |
| int prev_resid = -1; |
| |
| /* Move to the start of the format block */ |
| rp = nubus_rom_addr(slot); |
| nubus_rewind(&rp, FORMAT_BLOCK_SIZE, bytelanes); |
| |
| /* Actually we should probably panic if this fails */ |
| if ((board = kzalloc(sizeof(*board), GFP_ATOMIC)) == NULL) |
| return NULL; |
| board->fblock = rp; |
| |
| /* Dump the format block for debugging purposes */ |
| pr_debug("Slot %X, format block at 0x%p:\n", slot, rp); |
| pr_debug("%08lx\n", nubus_get_rom(&rp, 4, bytelanes)); |
| pr_debug("%08lx\n", nubus_get_rom(&rp, 4, bytelanes)); |
| pr_debug("%08lx\n", nubus_get_rom(&rp, 4, bytelanes)); |
| pr_debug("%02lx\n", nubus_get_rom(&rp, 1, bytelanes)); |
| pr_debug("%02lx\n", nubus_get_rom(&rp, 1, bytelanes)); |
| pr_debug("%08lx\n", nubus_get_rom(&rp, 4, bytelanes)); |
| pr_debug("%02lx\n", nubus_get_rom(&rp, 1, bytelanes)); |
| pr_debug("%02lx\n", nubus_get_rom(&rp, 1, bytelanes)); |
| rp = board->fblock; |
| |
| board->slot = slot; |
| board->slot_addr = (unsigned long)nubus_slot_addr(slot); |
| board->doffset = nubus_get_rom(&rp, 4, bytelanes); |
| /* rom_length is *supposed* to be the total length of the |
| * ROM. In practice it is the "amount of ROM used to compute |
| * the CRC." So some jokers decide to set it to zero and |
| * set the crc to zero so they don't have to do any math. |
| * See the Performa 460 ROM, for example. Those Apple "engineers". |
| */ |
| board->rom_length = nubus_get_rom(&rp, 4, bytelanes); |
| board->crc = nubus_get_rom(&rp, 4, bytelanes); |
| board->rev = nubus_get_rom(&rp, 1, bytelanes); |
| board->format = nubus_get_rom(&rp, 1, bytelanes); |
| board->lanes = bytelanes; |
| |
| /* Directory offset should be small and negative... */ |
| if (!(board->doffset & 0x00FF0000)) |
| pr_warn("Slot %X: Dodgy doffset!\n", slot); |
| dpat = nubus_get_rom(&rp, 4, bytelanes); |
| if (dpat != NUBUS_TEST_PATTERN) |
| pr_warn("Slot %X: Wrong test pattern %08lx!\n", slot, dpat); |
| |
| /* |
| * I wonder how the CRC is meant to work - |
| * any takers ? |
| * CSA: According to MAC docs, not all cards pass the CRC anyway, |
| * since the initial Macintosh ROM releases skipped the check. |
| */ |
| |
| /* Set up the directory pointer */ |
| board->directory = board->fblock; |
| nubus_move(&board->directory, nubus_expand32(board->doffset), |
| board->lanes); |
| |
| nubus_get_root_dir(board, &dir); |
| |
| /* We're ready to rock */ |
| pr_debug("Slot %X resources:\n", slot); |
| |
| /* Each slot should have one board resource and any number of |
| * functional resources. So we'll fill in some fields in the |
| * struct nubus_board from the board resource, then walk down |
| * the list of functional resources, spinning out a nubus_rsrc |
| * for each of them. |
| */ |
| if (nubus_readdir(&dir, &ent) == -1) { |
| /* We can't have this! */ |
| pr_err("Slot %X: Board resource not found!\n", slot); |
| return NULL; |
| } |
| |
| if (ent.type < 1 || ent.type > 127) |
| pr_warn("Slot %X: Board resource ID is invalid!\n", slot); |
| |
| board->procdir = nubus_proc_add_board(board); |
| |
| nubus_get_board_resource(board, slot, &ent); |
| |
| while (nubus_readdir(&dir, &ent) != -1) { |
| struct nubus_rsrc *fres; |
| struct nubus_rsrc **fresp; |
| |
| fres = nubus_get_functional_resource(board, slot, &ent); |
| if (fres == NULL) |
| continue; |
| |
| /* Resources should appear in ascending ID order. This sanity |
| * check prevents duplicate resource IDs. |
| */ |
| if (fres->resid <= prev_resid) { |
| kfree(fres); |
| continue; |
| } |
| prev_resid = fres->resid; |
| |
| /* We zeroed this out above */ |
| if (board->first_func_rsrc == NULL) |
| board->first_func_rsrc = fres; |
| |
| /* Put it on the func. resource list. Keep entries in order. */ |
| for (fresp = &nubus_func_rsrcs; *fresp != NULL; |
| fresp = &((*fresp)->next)) |
| /* spin */; |
| *fresp = fres; |
| fres->next = NULL; |
| } |
| |
| /* Put it on the global NuBus board chain. Keep entries in order. */ |
| for (boardp = &nubus_boards; *boardp != NULL; |
| boardp = &((*boardp)->next)) |
| /* spin */; |
| *boardp = board; |
| board->next = NULL; |
| |
| return board; |
| } |
| |
| static void __init nubus_probe_slot(int slot) |
| { |
| unsigned char dp; |
| unsigned char *rp; |
| int i; |
| |
| rp = nubus_rom_addr(slot); |
| for (i = 4; i; i--) { |
| rp--; |
| if (!hwreg_present(rp)) |
| continue; |
| |
| dp = *rp; |
| |
| /* The last byte of the format block consists of two |
| nybbles which are "mirror images" of each other. |
| These show us the valid bytelanes */ |
| if ((((dp >> 4) ^ dp) & 0x0F) != 0x0F) |
| continue; |
| /* Check that this value is actually *on* one of the |
| bytelanes it claims are valid! */ |
| if (not_useful(rp, dp)) |
| continue; |
| |
| /* Looks promising. Let's put it on the list. */ |
| nubus_add_board(slot, dp); |
| |
| return; |
| } |
| } |
| |
| static void __init nubus_scan_bus(void) |
| { |
| int slot; |
| |
| pr_info("NuBus: Scanning NuBus slots.\n"); |
| for (slot = 9; slot < 15; slot++) { |
| nubus_probe_slot(slot); |
| } |
| } |
| |
| static int __init nubus_init(void) |
| { |
| if (!MACH_IS_MAC) |
| return 0; |
| |
| nubus_proc_init(); |
| nubus_scan_bus(); |
| return 0; |
| } |
| |
| subsys_initcall(nubus_init); |