| // SPDX-License-Identifier: GPL-2.0-only |
| // |
| // rt5682.c -- RT5682 ALSA SoC audio component driver |
| // |
| // Copyright 2018 Realtek Semiconductor Corp. |
| // Author: Bard Liao <bardliao@realtek.com> |
| // |
| |
| #include <linux/module.h> |
| #include <linux/moduleparam.h> |
| #include <linux/init.h> |
| #include <linux/delay.h> |
| #include <linux/pm.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/i2c.h> |
| #include <linux/platform_device.h> |
| #include <linux/spi/spi.h> |
| #include <linux/acpi.h> |
| #include <linux/gpio.h> |
| #include <linux/of_gpio.h> |
| #include <linux/mutex.h> |
| #include <sound/core.h> |
| #include <sound/pcm.h> |
| #include <sound/pcm_params.h> |
| #include <sound/jack.h> |
| #include <sound/soc.h> |
| #include <sound/soc-dapm.h> |
| #include <sound/initval.h> |
| #include <sound/tlv.h> |
| #include <sound/rt5682.h> |
| |
| #include "rl6231.h" |
| #include "rt5682.h" |
| |
| static const struct rt5682_platform_data i2s_default_platform_data = { |
| .dmic1_data_pin = RT5682_DMIC1_DATA_GPIO2, |
| .dmic1_clk_pin = RT5682_DMIC1_CLK_GPIO3, |
| .jd_src = RT5682_JD1, |
| .btndet_delay = 16, |
| .dai_clk_names[RT5682_DAI_WCLK_IDX] = "rt5682-dai-wclk", |
| .dai_clk_names[RT5682_DAI_BCLK_IDX] = "rt5682-dai-bclk", |
| }; |
| |
| static const struct regmap_config rt5682_regmap = { |
| .reg_bits = 16, |
| .val_bits = 16, |
| .max_register = RT5682_I2C_MODE, |
| .volatile_reg = rt5682_volatile_register, |
| .readable_reg = rt5682_readable_register, |
| .cache_type = REGCACHE_RBTREE, |
| .reg_defaults = rt5682_reg, |
| .num_reg_defaults = RT5682_REG_NUM, |
| .use_single_read = true, |
| .use_single_write = true, |
| }; |
| |
| static void rt5682_jd_check_handler(struct work_struct *work) |
| { |
| struct rt5682_priv *rt5682 = container_of(work, struct rt5682_priv, |
| jd_check_work.work); |
| |
| if (snd_soc_component_read(rt5682->component, RT5682_AJD1_CTRL) |
| & RT5682_JDH_RS_MASK) { |
| /* jack out */ |
| rt5682->jack_type = rt5682_headset_detect(rt5682->component, 0); |
| |
| snd_soc_jack_report(rt5682->hs_jack, rt5682->jack_type, |
| SND_JACK_HEADSET | |
| SND_JACK_BTN_0 | SND_JACK_BTN_1 | |
| SND_JACK_BTN_2 | SND_JACK_BTN_3); |
| } else { |
| schedule_delayed_work(&rt5682->jd_check_work, 500); |
| } |
| } |
| |
| static irqreturn_t rt5682_irq(int irq, void *data) |
| { |
| struct rt5682_priv *rt5682 = data; |
| |
| mod_delayed_work(system_power_efficient_wq, |
| &rt5682->jack_detect_work, msecs_to_jiffies(250)); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static struct snd_soc_dai_driver rt5682_dai[] = { |
| { |
| .name = "rt5682-aif1", |
| .id = RT5682_AIF1, |
| .playback = { |
| .stream_name = "AIF1 Playback", |
| .channels_min = 1, |
| .channels_max = 2, |
| .rates = RT5682_STEREO_RATES, |
| .formats = RT5682_FORMATS, |
| }, |
| .capture = { |
| .stream_name = "AIF1 Capture", |
| .channels_min = 1, |
| .channels_max = 2, |
| .rates = RT5682_STEREO_RATES, |
| .formats = RT5682_FORMATS, |
| }, |
| .ops = &rt5682_aif1_dai_ops, |
| }, |
| { |
| .name = "rt5682-aif2", |
| .id = RT5682_AIF2, |
| .capture = { |
| .stream_name = "AIF2 Capture", |
| .channels_min = 1, |
| .channels_max = 2, |
| .rates = RT5682_STEREO_RATES, |
| .formats = RT5682_FORMATS, |
| }, |
| .ops = &rt5682_aif2_dai_ops, |
| }, |
| }; |
| |
| static int rt5682_i2c_probe(struct i2c_client *i2c, |
| const struct i2c_device_id *id) |
| { |
| struct rt5682_platform_data *pdata = dev_get_platdata(&i2c->dev); |
| struct rt5682_priv *rt5682; |
| int i, ret; |
| unsigned int val; |
| |
| rt5682 = devm_kzalloc(&i2c->dev, sizeof(struct rt5682_priv), |
| GFP_KERNEL); |
| if (!rt5682) |
| return -ENOMEM; |
| |
| i2c_set_clientdata(i2c, rt5682); |
| |
| rt5682->pdata = i2s_default_platform_data; |
| |
| if (pdata) |
| rt5682->pdata = *pdata; |
| else |
| rt5682_parse_dt(rt5682, &i2c->dev); |
| |
| rt5682->regmap = devm_regmap_init_i2c(i2c, &rt5682_regmap); |
| if (IS_ERR(rt5682->regmap)) { |
| ret = PTR_ERR(rt5682->regmap); |
| dev_err(&i2c->dev, "Failed to allocate register map: %d\n", |
| ret); |
| return ret; |
| } |
| |
| for (i = 0; i < ARRAY_SIZE(rt5682->supplies); i++) |
| rt5682->supplies[i].supply = rt5682_supply_names[i]; |
| |
| ret = devm_regulator_bulk_get(&i2c->dev, ARRAY_SIZE(rt5682->supplies), |
| rt5682->supplies); |
| if (ret) { |
| dev_err(&i2c->dev, "Failed to request supplies: %d\n", ret); |
| return ret; |
| } |
| |
| ret = regulator_bulk_enable(ARRAY_SIZE(rt5682->supplies), |
| rt5682->supplies); |
| if (ret) { |
| dev_err(&i2c->dev, "Failed to enable supplies: %d\n", ret); |
| return ret; |
| } |
| |
| if (gpio_is_valid(rt5682->pdata.ldo1_en)) { |
| if (devm_gpio_request_one(&i2c->dev, rt5682->pdata.ldo1_en, |
| GPIOF_OUT_INIT_HIGH, "rt5682")) |
| dev_err(&i2c->dev, "Fail gpio_request gpio_ldo\n"); |
| } |
| |
| /* Sleep for 300 ms miniumum */ |
| usleep_range(300000, 350000); |
| |
| regmap_write(rt5682->regmap, RT5682_I2C_MODE, 0x1); |
| usleep_range(10000, 15000); |
| |
| regmap_read(rt5682->regmap, RT5682_DEVICE_ID, &val); |
| if (val != DEVICE_ID) { |
| dev_err(&i2c->dev, |
| "Device with ID register %x is not rt5682\n", val); |
| return -ENODEV; |
| } |
| |
| mutex_init(&rt5682->calibrate_mutex); |
| rt5682_calibrate(rt5682); |
| |
| rt5682_apply_patch_list(rt5682, &i2c->dev); |
| |
| regmap_write(rt5682->regmap, RT5682_DEPOP_1, 0x0000); |
| |
| /* DMIC pin*/ |
| if (rt5682->pdata.dmic1_data_pin != RT5682_DMIC1_NULL) { |
| switch (rt5682->pdata.dmic1_data_pin) { |
| case RT5682_DMIC1_DATA_GPIO2: /* share with LRCK2 */ |
| regmap_update_bits(rt5682->regmap, RT5682_DMIC_CTRL_1, |
| RT5682_DMIC_1_DP_MASK, RT5682_DMIC_1_DP_GPIO2); |
| regmap_update_bits(rt5682->regmap, RT5682_GPIO_CTRL_1, |
| RT5682_GP2_PIN_MASK, RT5682_GP2_PIN_DMIC_SDA); |
| break; |
| |
| case RT5682_DMIC1_DATA_GPIO5: /* share with DACDAT1 */ |
| regmap_update_bits(rt5682->regmap, RT5682_DMIC_CTRL_1, |
| RT5682_DMIC_1_DP_MASK, RT5682_DMIC_1_DP_GPIO5); |
| regmap_update_bits(rt5682->regmap, RT5682_GPIO_CTRL_1, |
| RT5682_GP5_PIN_MASK, RT5682_GP5_PIN_DMIC_SDA); |
| break; |
| |
| default: |
| dev_warn(&i2c->dev, "invalid DMIC_DAT pin\n"); |
| break; |
| } |
| |
| switch (rt5682->pdata.dmic1_clk_pin) { |
| case RT5682_DMIC1_CLK_GPIO1: /* share with IRQ */ |
| regmap_update_bits(rt5682->regmap, RT5682_GPIO_CTRL_1, |
| RT5682_GP1_PIN_MASK, RT5682_GP1_PIN_DMIC_CLK); |
| break; |
| |
| case RT5682_DMIC1_CLK_GPIO3: /* share with BCLK2 */ |
| regmap_update_bits(rt5682->regmap, RT5682_GPIO_CTRL_1, |
| RT5682_GP3_PIN_MASK, RT5682_GP3_PIN_DMIC_CLK); |
| if (rt5682->pdata.dmic_clk_driving_high) |
| regmap_update_bits(rt5682->regmap, |
| RT5682_PAD_DRIVING_CTRL, |
| RT5682_PAD_DRV_GP3_MASK, |
| 2 << RT5682_PAD_DRV_GP3_SFT); |
| break; |
| |
| default: |
| dev_warn(&i2c->dev, "invalid DMIC_CLK pin\n"); |
| break; |
| } |
| } |
| |
| regmap_update_bits(rt5682->regmap, RT5682_PWR_ANLG_1, |
| RT5682_LDO1_DVO_MASK | RT5682_HP_DRIVER_MASK, |
| RT5682_LDO1_DVO_12 | RT5682_HP_DRIVER_5X); |
| regmap_write(rt5682->regmap, RT5682_MICBIAS_2, 0x0080); |
| regmap_update_bits(rt5682->regmap, RT5682_GPIO_CTRL_1, |
| RT5682_GP4_PIN_MASK | RT5682_GP5_PIN_MASK, |
| RT5682_GP4_PIN_ADCDAT1 | RT5682_GP5_PIN_DACDAT1); |
| regmap_write(rt5682->regmap, RT5682_TEST_MODE_CTRL_1, 0x0000); |
| regmap_update_bits(rt5682->regmap, RT5682_BIAS_CUR_CTRL_8, |
| RT5682_HPA_CP_BIAS_CTRL_MASK, RT5682_HPA_CP_BIAS_3UA); |
| regmap_update_bits(rt5682->regmap, RT5682_CHARGE_PUMP_1, |
| RT5682_CP_CLK_HP_MASK, RT5682_CP_CLK_HP_300KHZ); |
| regmap_update_bits(rt5682->regmap, RT5682_HP_CHARGE_PUMP_1, |
| RT5682_PM_HP_MASK, RT5682_PM_HP_HV); |
| regmap_update_bits(rt5682->regmap, RT5682_DMIC_CTRL_1, |
| RT5682_FIFO_CLK_DIV_MASK, RT5682_FIFO_CLK_DIV_2); |
| |
| INIT_DELAYED_WORK(&rt5682->jack_detect_work, |
| rt5682_jack_detect_handler); |
| INIT_DELAYED_WORK(&rt5682->jd_check_work, |
| rt5682_jd_check_handler); |
| |
| if (i2c->irq) { |
| ret = devm_request_threaded_irq(&i2c->dev, i2c->irq, NULL, |
| rt5682_irq, IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING |
| | IRQF_ONESHOT, "rt5682", rt5682); |
| if (ret) |
| dev_err(&i2c->dev, "Failed to reguest IRQ: %d\n", ret); |
| } |
| |
| return devm_snd_soc_register_component(&i2c->dev, |
| &rt5682_soc_component_dev, |
| rt5682_dai, ARRAY_SIZE(rt5682_dai)); |
| } |
| |
| static void rt5682_i2c_shutdown(struct i2c_client *client) |
| { |
| struct rt5682_priv *rt5682 = i2c_get_clientdata(client); |
| |
| cancel_delayed_work_sync(&rt5682->jack_detect_work); |
| cancel_delayed_work_sync(&rt5682->jd_check_work); |
| |
| rt5682_reset(rt5682); |
| } |
| |
| static const struct of_device_id rt5682_of_match[] = { |
| {.compatible = "realtek,rt5682i"}, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(of, rt5682_of_match); |
| |
| static const struct acpi_device_id rt5682_acpi_match[] = { |
| {"10EC5682", 0,}, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(acpi, rt5682_acpi_match); |
| |
| static const struct i2c_device_id rt5682_i2c_id[] = { |
| {"rt5682", 0}, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(i2c, rt5682_i2c_id); |
| |
| static struct i2c_driver rt5682_i2c_driver = { |
| .driver = { |
| .name = "rt5682", |
| .of_match_table = rt5682_of_match, |
| .acpi_match_table = rt5682_acpi_match, |
| .probe_type = PROBE_PREFER_ASYNCHRONOUS, |
| }, |
| .probe = rt5682_i2c_probe, |
| .shutdown = rt5682_i2c_shutdown, |
| .id_table = rt5682_i2c_id, |
| }; |
| module_i2c_driver(rt5682_i2c_driver); |
| |
| MODULE_DESCRIPTION("ASoC RT5682 driver"); |
| MODULE_AUTHOR("Bard Liao <bardliao@realtek.com>"); |
| MODULE_LICENSE("GPL v2"); |