| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * ROHM BD9571MWV-M regulator driver |
| * |
| * Copyright (C) 2017 Marek Vasut <marek.vasut+renesas@gmail.com> |
| * |
| * Based on the TPS65086 driver |
| * |
| * NOTE: VD09 is missing |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/platform_device.h> |
| #include <linux/regulator/driver.h> |
| |
| #include <linux/mfd/bd9571mwv.h> |
| |
| struct bd9571mwv_reg { |
| struct bd9571mwv *bd; |
| |
| /* DDR Backup Power */ |
| u8 bkup_mode_cnt_keepon; /* from "rohm,ddr-backup-power" */ |
| u8 bkup_mode_cnt_saved; |
| bool bkup_mode_enabled; |
| |
| /* Power switch type */ |
| bool rstbmode_level; |
| bool rstbmode_pulse; |
| }; |
| |
| enum bd9571mwv_regulators { VD09, VD18, VD25, VD33, DVFS }; |
| |
| #define BD9571MWV_REG(_name, _of, _id, _ops, _vr, _vm, _nv, _min, _step, _lmin)\ |
| { \ |
| .name = _name, \ |
| .of_match = of_match_ptr(_of), \ |
| .regulators_node = "regulators", \ |
| .id = _id, \ |
| .ops = &_ops, \ |
| .n_voltages = _nv, \ |
| .type = REGULATOR_VOLTAGE, \ |
| .owner = THIS_MODULE, \ |
| .vsel_reg = _vr, \ |
| .vsel_mask = _vm, \ |
| .min_uV = _min, \ |
| .uV_step = _step, \ |
| .linear_min_sel = _lmin, \ |
| } |
| |
| static int bd9571mwv_avs_get_moni_state(struct regulator_dev *rdev) |
| { |
| unsigned int val; |
| int ret; |
| |
| ret = regmap_read(rdev->regmap, BD9571MWV_AVS_SET_MONI, &val); |
| if (ret != 0) |
| return ret; |
| |
| return val & BD9571MWV_AVS_SET_MONI_MASK; |
| } |
| |
| static int bd9571mwv_avs_set_voltage_sel_regmap(struct regulator_dev *rdev, |
| unsigned int sel) |
| { |
| int ret; |
| |
| ret = bd9571mwv_avs_get_moni_state(rdev); |
| if (ret < 0) |
| return ret; |
| |
| return regmap_write_bits(rdev->regmap, BD9571MWV_AVS_VD09_VID(ret), |
| rdev->desc->vsel_mask, sel); |
| } |
| |
| static int bd9571mwv_avs_get_voltage_sel_regmap(struct regulator_dev *rdev) |
| { |
| unsigned int val; |
| int ret; |
| |
| ret = bd9571mwv_avs_get_moni_state(rdev); |
| if (ret < 0) |
| return ret; |
| |
| ret = regmap_read(rdev->regmap, BD9571MWV_AVS_VD09_VID(ret), &val); |
| if (ret != 0) |
| return ret; |
| |
| val &= rdev->desc->vsel_mask; |
| val >>= ffs(rdev->desc->vsel_mask) - 1; |
| |
| return val; |
| } |
| |
| static int bd9571mwv_reg_set_voltage_sel_regmap(struct regulator_dev *rdev, |
| unsigned int sel) |
| { |
| return regmap_write_bits(rdev->regmap, BD9571MWV_DVFS_SETVID, |
| rdev->desc->vsel_mask, sel); |
| } |
| |
| /* Operations permitted on AVS voltage regulator */ |
| static struct regulator_ops avs_ops = { |
| .set_voltage_sel = bd9571mwv_avs_set_voltage_sel_regmap, |
| .map_voltage = regulator_map_voltage_linear, |
| .get_voltage_sel = bd9571mwv_avs_get_voltage_sel_regmap, |
| .list_voltage = regulator_list_voltage_linear, |
| }; |
| |
| /* Operations permitted on voltage regulators */ |
| static struct regulator_ops reg_ops = { |
| .set_voltage_sel = bd9571mwv_reg_set_voltage_sel_regmap, |
| .map_voltage = regulator_map_voltage_linear, |
| .get_voltage_sel = regulator_get_voltage_sel_regmap, |
| .list_voltage = regulator_list_voltage_linear, |
| }; |
| |
| /* Operations permitted on voltage monitors */ |
| static struct regulator_ops vid_ops = { |
| .map_voltage = regulator_map_voltage_linear, |
| .get_voltage_sel = regulator_get_voltage_sel_regmap, |
| .list_voltage = regulator_list_voltage_linear, |
| }; |
| |
| static struct regulator_desc regulators[] = { |
| BD9571MWV_REG("VD09", "vd09", VD09, avs_ops, 0, 0x7f, |
| 0x80, 600000, 10000, 0x3c), |
| BD9571MWV_REG("VD18", "vd18", VD18, vid_ops, BD9571MWV_VD18_VID, 0xf, |
| 16, 1625000, 25000, 0), |
| BD9571MWV_REG("VD25", "vd25", VD25, vid_ops, BD9571MWV_VD25_VID, 0xf, |
| 16, 2150000, 50000, 0), |
| BD9571MWV_REG("VD33", "vd33", VD33, vid_ops, BD9571MWV_VD33_VID, 0xf, |
| 11, 2800000, 100000, 0), |
| BD9571MWV_REG("DVFS", "dvfs", DVFS, reg_ops, |
| BD9571MWV_DVFS_MONIVDAC, 0x7f, |
| 0x80, 600000, 10000, 0x3c), |
| }; |
| |
| #ifdef CONFIG_PM_SLEEP |
| static int bd9571mwv_bkup_mode_read(struct bd9571mwv *bd, unsigned int *mode) |
| { |
| int ret; |
| |
| ret = regmap_read(bd->regmap, BD9571MWV_BKUP_MODE_CNT, mode); |
| if (ret) { |
| dev_err(bd->dev, "failed to read backup mode (%d)\n", ret); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static int bd9571mwv_bkup_mode_write(struct bd9571mwv *bd, unsigned int mode) |
| { |
| int ret; |
| |
| ret = regmap_write(bd->regmap, BD9571MWV_BKUP_MODE_CNT, mode); |
| if (ret) { |
| dev_err(bd->dev, "failed to configure backup mode 0x%x (%d)\n", |
| mode, ret); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static ssize_t backup_mode_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct bd9571mwv_reg *bdreg = dev_get_drvdata(dev); |
| |
| return sprintf(buf, "%s\n", bdreg->bkup_mode_enabled ? "on" : "off"); |
| } |
| |
| static ssize_t backup_mode_store(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct bd9571mwv_reg *bdreg = dev_get_drvdata(dev); |
| unsigned int mode; |
| int ret; |
| |
| if (!count) |
| return 0; |
| |
| ret = kstrtobool(buf, &bdreg->bkup_mode_enabled); |
| if (ret) |
| return ret; |
| |
| if (!bdreg->rstbmode_level) |
| return count; |
| |
| /* |
| * Configure DDR Backup Mode, to change the role of the accessory power |
| * switch from a power switch to a wake-up switch, or vice versa |
| */ |
| ret = bd9571mwv_bkup_mode_read(bdreg->bd, &mode); |
| if (ret) |
| return ret; |
| |
| mode &= ~BD9571MWV_BKUP_MODE_CNT_KEEPON_MASK; |
| if (bdreg->bkup_mode_enabled) |
| mode |= bdreg->bkup_mode_cnt_keepon; |
| |
| ret = bd9571mwv_bkup_mode_write(bdreg->bd, mode); |
| if (ret) |
| return ret; |
| |
| return count; |
| } |
| |
| static DEVICE_ATTR_RW(backup_mode); |
| |
| static int bd9571mwv_suspend(struct device *dev) |
| { |
| struct bd9571mwv_reg *bdreg = dev_get_drvdata(dev); |
| unsigned int mode; |
| int ret; |
| |
| if (!bdreg->bkup_mode_enabled) |
| return 0; |
| |
| /* Save DDR Backup Mode */ |
| ret = bd9571mwv_bkup_mode_read(bdreg->bd, &mode); |
| if (ret) |
| return ret; |
| |
| bdreg->bkup_mode_cnt_saved = mode; |
| |
| if (!bdreg->rstbmode_pulse) |
| return 0; |
| |
| /* Enable DDR Backup Mode */ |
| mode &= ~BD9571MWV_BKUP_MODE_CNT_KEEPON_MASK; |
| mode |= bdreg->bkup_mode_cnt_keepon; |
| |
| if (mode != bdreg->bkup_mode_cnt_saved) |
| return bd9571mwv_bkup_mode_write(bdreg->bd, mode); |
| |
| return 0; |
| } |
| |
| static int bd9571mwv_resume(struct device *dev) |
| { |
| struct bd9571mwv_reg *bdreg = dev_get_drvdata(dev); |
| |
| if (!bdreg->bkup_mode_enabled) |
| return 0; |
| |
| /* Restore DDR Backup Mode */ |
| return bd9571mwv_bkup_mode_write(bdreg->bd, bdreg->bkup_mode_cnt_saved); |
| } |
| |
| static const struct dev_pm_ops bd9571mwv_pm = { |
| SET_SYSTEM_SLEEP_PM_OPS(bd9571mwv_suspend, bd9571mwv_resume) |
| }; |
| |
| static int bd9571mwv_regulator_remove(struct platform_device *pdev) |
| { |
| device_remove_file(&pdev->dev, &dev_attr_backup_mode); |
| return 0; |
| } |
| #define DEV_PM_OPS &bd9571mwv_pm |
| #else |
| #define DEV_PM_OPS NULL |
| #define bd9571mwv_regulator_remove NULL |
| #endif /* CONFIG_PM_SLEEP */ |
| |
| static int bd9571mwv_regulator_probe(struct platform_device *pdev) |
| { |
| struct bd9571mwv *bd = dev_get_drvdata(pdev->dev.parent); |
| struct regulator_config config = { }; |
| struct bd9571mwv_reg *bdreg; |
| struct regulator_dev *rdev; |
| unsigned int val; |
| int i; |
| |
| bdreg = devm_kzalloc(&pdev->dev, sizeof(*bdreg), GFP_KERNEL); |
| if (!bdreg) |
| return -ENOMEM; |
| |
| bdreg->bd = bd; |
| |
| platform_set_drvdata(pdev, bdreg); |
| |
| config.dev = &pdev->dev; |
| config.dev->of_node = bd->dev->of_node; |
| config.driver_data = bd; |
| config.regmap = bd->regmap; |
| |
| for (i = 0; i < ARRAY_SIZE(regulators); i++) { |
| rdev = devm_regulator_register(&pdev->dev, ®ulators[i], |
| &config); |
| if (IS_ERR(rdev)) { |
| dev_err(bd->dev, "failed to register %s regulator\n", |
| pdev->name); |
| return PTR_ERR(rdev); |
| } |
| } |
| |
| val = 0; |
| of_property_read_u32(bd->dev->of_node, "rohm,ddr-backup-power", &val); |
| if (val & ~BD9571MWV_BKUP_MODE_CNT_KEEPON_MASK) { |
| dev_err(bd->dev, "invalid %s mode %u\n", |
| "rohm,ddr-backup-power", val); |
| return -EINVAL; |
| } |
| bdreg->bkup_mode_cnt_keepon = val; |
| |
| bdreg->rstbmode_level = of_property_read_bool(bd->dev->of_node, |
| "rohm,rstbmode-level"); |
| bdreg->rstbmode_pulse = of_property_read_bool(bd->dev->of_node, |
| "rohm,rstbmode-pulse"); |
| if (bdreg->rstbmode_level && bdreg->rstbmode_pulse) { |
| dev_err(bd->dev, "only one rohm,rstbmode-* may be specified"); |
| return -EINVAL; |
| } |
| |
| #ifdef CONFIG_PM_SLEEP |
| if (bdreg->bkup_mode_cnt_keepon) { |
| int ret; |
| |
| /* |
| * Backup mode is enabled by default in pulse mode, but needs |
| * explicit user setup in level mode. |
| */ |
| bdreg->bkup_mode_enabled = bdreg->rstbmode_pulse; |
| |
| ret = device_create_file(&pdev->dev, &dev_attr_backup_mode); |
| if (ret) |
| return ret; |
| } |
| #endif /* CONFIG_PM_SLEEP */ |
| |
| return 0; |
| } |
| |
| static const struct platform_device_id bd9571mwv_regulator_id_table[] = { |
| { "bd9571mwv-regulator", }, |
| { /* sentinel */ } |
| }; |
| MODULE_DEVICE_TABLE(platform, bd9571mwv_regulator_id_table); |
| |
| static struct platform_driver bd9571mwv_regulator_driver = { |
| .driver = { |
| .name = "bd9571mwv-regulator", |
| .pm = DEV_PM_OPS, |
| }, |
| .probe = bd9571mwv_regulator_probe, |
| .remove = bd9571mwv_regulator_remove, |
| .id_table = bd9571mwv_regulator_id_table, |
| }; |
| module_platform_driver(bd9571mwv_regulator_driver); |
| |
| MODULE_AUTHOR("Marek Vasut <marek.vasut+renesas@gmail.com>"); |
| MODULE_DESCRIPTION("BD9571MWV Regulator driver"); |
| MODULE_LICENSE("GPL v2"); |